Magic Angle Spinning NMR Research Articles

Insights into the Iron- and Phosphorus-Induced Structural Rearrangements in Sodium Aluminoborosilicate Glasses and Their Impact on Melt Rheology and Crystallization Behavior

This paper presents an insight into the structural rearrangements induced by Fe2O3 and P2O5 in glasses designed in the Na2O–Al2O3–B2O3–SiO2 quaternary system. A suite of state-of-the-art characterization techniques, including magic angle spinning-nuclear magnetic resonance (MAS NMR) (on both iron-free and iron-containing glasses), Raman, and Mössbauer spectroscopies, have been employed to study the structural evolution of glasses as a function of the Fe2O3/Al2O3 ratio and P2O5 content over a broad composition space. It has been shown that while P2O5 tends to repolymerize the structure of Fe2O3-free glasses, it has a minimal impact on the network connectivity of iron-rich glasses. Further, there seems to exist a strong tetrahedral avoidance between AlO4 and FeO4 units in the glass structure. In P2O5-free glasses, iron tends to preferentially bond with borate and silicate units, while in the presence of P2O5, iron prefers to associate with phosphate (over borate and silicate) units in the glass structure. Finally, an attempt has been made to correlate the underlying structural descriptors with the rheological and crystallization behavior of glasses with an overarching goal to establish the composition–structure–property relationships in the investigated glass system.

Surface Interactions and Nanoconfinement of Methane and Methane plus CO2 Revealed by High-Pressure Magic Angle Spinning NMR Spectroscopy and Molecular Dynamics.

This study explores the fundamental, molecular- to microscopic-level behavior of methane gas confined into nanoporous silica proxies with different pore diameters and surface-to-volume (S/V) ratios. Surfaces and pore walls of nanoporous silica matrices are decorated with hydroxyl (-OH) groups, resembling natural heterogeneity. High-pressure MAS NMR was utilized to characterize the interactions between methane and the engineered nanoporous silica proxies under various temperature and pressure regimes. There was a change in the chemical shift position of confined methane slightly in the mixtures with nanoporous silica up to 393 K, as shown by high-pressure 13C-NMR. The 13C-NMR chemical shift of methane was changed by pressure, explained by the densification of methane inside the nanoporous silica materials. The influence of pore diameter and S/V of the nanoporous silica materials on the behaviors and dynamics of methane were studied. The presence of CO2 in mixtures of silica and methane needs analysis with caution because CO2 in a supercritical state and gaseous CO2 change the original structure of nanoporous silica and change surface area and pore volume. According to simulation, the picosecond scale dynamics of methane confined in larger pores of amorphous silica is faster. In the 4 nm pore, the diffusivity obtained from MD simulations in the pore with a higher S/V ratio is slower due to the trapping of methane molecules in adsorbed layers close to the corrugated pore surface. In contrast, relaxation measured with NMR for smaller pores (higher S/V) exhibits larger T1, indicating slower relaxation.

Structure of the Solid-State Electrolyte Li3+2xP1–xAlxS4: Lithium-Ion Transport Properties in Crystalline vs Glassy Phases

The search for new solid electrolyte materials and an understanding of fast-ion conductivity are crucial for the development of safe and high-power all-solid-state battery technology. Herein, we present the synthesis, structure, and properties of a crystalline lithium-ion conductor, Li3.3Al0.15P0.85S4 (i.e., Li9.9Al0.45P2.55S12), found in the compositional range Li3+2xP1-xAlxS4 (x = 0.15, 0.20, and 0.33). 31P magic-angle spinning nuclear magnetic resonance (MAS-NMR) aided in identifying the successful introduction of Al into the lattice. At high values of x (>0.15), crystalline Li5AlS4 and a glassy amorphous component exsolve to yield a multiphase mixture. The crystal structure of Li3.3Al0.15P0.85S4 was elucidated by single-crystal X-ray diffraction and powder neutron diffraction, demonstrating that it belongs to the thio-LISICON family with the Pnma space group, a = 12.9572(13) Å, b = 8.0861(8) Å, c = 6.1466(6) Å, and V = 644.00(11) Å3. The Li+-ion conductivity and diffusivity in this bulk material (which contains about 10 wt % of an amorphous phase, as prepared) were studied by electrochemical impedance spectroscopy and 7Li pulsed-field gradient nuclear magnetic resonance spectroscopy (PFG-NMR). The total ionic conductivity of Li3.3Al0.15P0.85S4 is 0.22(2) mS·cm-1 at room temperature with an activation energy of 0.30(1) eV. A two-component analysis method based on the Kärger equations was developed to analyze the diffusive exchange between the bulk and amorphous phases of Li3.3Al0.15P0.85S4 detected via the PFG-NMR signal attenuation curves. This approach was employed to quantitatively compare different sample morphologies (glass powder, crystalline powder, and crystalline pellets of Li3.3Al0.15P0.85S4) and assess the influence of the macroscopic state on microscopic ion transport, as supported by NMR relaxation measurements.

Aluminosilicate-Supported Catalysts for the Synthesis of Cyclic Carbonates by Reaction of CO2 with the Corresponding Epoxides.

Functionalized aluminosilicate materials were studied as catalysts for the conversion of different cyclic carbonates to the corresponding epoxides by the addition of CO2. Aluminum was incorporated in the mesostructured SBA-15 silica network. Thereafter, functionalization with imidazolium chloride or magnesium oxide was performed on the Al_SBA-15 supports. The isomorphic substitution of Si with Al and the resulting acidity of the supports were investigated via 27Al magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy and NH3 adsorption microcalorimetry. The Al content and the amount of MgO were quantified via inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis. The anchoring of the imidazolium salt was assessed by 29Si and 13C MAS NMR spectroscopy and quantified by combustion chemical analysis. Textural and structural properties of supports and catalysts were studied by N2 physisorption and X-ray diffraction (XRD). The functionalized systems were then tested as catalysts for the conversion of CO2 and epoxides to cyclic carbonates in a batch reactor at 100 or 125 °C, with an initial CO2 pressure (at room temperature) of 25 bar. Whereas the activity of the MgO/xAl_SBA-15 systems was moderate for the conversion of glycidol to the corresponding cyclic carbonate, the Al_SBA-15-supported imidazolium chloride catalysts gave excellent results over different epoxides (conversion of glycidol, epichlorohydrin, and styrene oxide up to 89%, 78%, and 18%, respectively). Reusability tests were also performed. Even when some deactivation from one run to the other was observed, a comparison with the literature showed the Al-containing imidazolium systems to be promising catalysts. The fully heterogeneous nature of the present catalysts, where the inorganic support on which the imidazolium species are immobilized also contains the Lewis acid sites, gives them a further advantage with respect to most of the catalytic systems reported in the literature so far.

Inclusion Polymerization of Pyrrole and Ethylenedioxythiophene in Assembled Triphenylamine Bis-Urea Macrocycles

Herein, two different monomers, pyrrole (Py) and ethylenedioxythiophene (EDOT), are loaded into a self-assembled bis-urea host 1 and oxidatively polymerized within its nanochannels, dramatically changing the properties of the crystalline complexes. Molecular dynamics (MD) simulation of both monomers within the channel demonstrates that they diffuse through the confinement upon applying thermal energy, which may facilitate the polymerization reaction. The structures of these host–guest complexes are characterized before and after polymerization using solid-state and photophysical measurements. The host maintains its columnar morphology during polymerization at 90 °C using iodine as an oxidizing agent. Intriguingly, upon dissolution of the host and recovery by filtration, the polymers exhibit memory of their nanoreactor environment, displaying unusual order by scanning electron microscopy, powder X-ray diffraction, and small- and wide-angle X-ray analysis. Solid-state 13C cross-polarized magic angle spinning NMR suggests that polypyrrole (PPy) exhibits primarily α,α′ linkages with some contributions from the quinoid form. Similarly, poly(ethylenedioxythiophene) (PEDOT) also exhibits formation of primarily α,α′ linkages with minor quinoid contributions. Both the 1·PPy and 1·PEDOT crystals show a 103-fold increase in conductivity to ∼10–6 S/cm versus host 1 crystals, which are nonconductive ∼10–9 S/cm. Overall, supramolecular polymerization strategies have the potential to readily modulate the properties of nanostructured materials.

Structure of diopside, enstatite, and magnesium aluminosilicate glasses: A joint approach using neutron and x-ray diffraction and solid-state NMR.

Neutron diffraction with magnesium isotope substitution, high energy x-ray diffraction, and 29Si, 27Al, and 25Mg solid-state nuclear magnetic resonance (NMR) spectroscopy were used to measure the structure of glassy diopside (CaMgSi2O6), enstatite (MgSiO3), and four (MgO)x(Al2O3)y(SiO2)1-x-y glasses, with x = 0.375 or 0.25 along the 50 mol. % silica tie-line (1 - x - y = 0.5) or with x = 0.3 or 0.2 along the 60 mol. % silica tie-line (1 - x - y = 0.6). The bound coherent neutron scattering length of the isotope 25Mg was remeasured, and the value of 3.720(12) fm was obtained from a Rietveld refinement of the powder diffraction patterns measured for crystalline 25MgO. The diffraction results for the glasses show a broad asymmetric distribution of Mg-O nearest-neighbors with a coordination number of 4.40(4) and 4.46(4) for the diopside and enstatite glasses, respectively. As magnesia is replaced by alumina along a tie-line with 50 or 60 mol. % silica, the Mg-O coordination number increases with the weighted bond distance as less Mg2+ ions adopt a network-modifying role and more of these ions adopt a predominantly charge-compensating role. 25Mg magic angle spinning (MAS) NMR results could not resolve the different coordination environments of Mg2+ under the employed field strength (14.1T) and spinning rate (20kHz). The results emphasize the power of neutron diffraction with isotope substitution to provide unambiguous site-specific information on the coordination environment of magnesium in disordered materials.

Compositional dependence of thermophysical properties in binary alkaline earth borate melts: Insights from structure in short-range and intermediate-range order

• Thermal conductivity of alkaline earth borate melts is investigated systematically for the first time using transient hot-wire method. • Thermal diffusivity is extrapolated from thermal conductivity, heat capacity and melt density, providing a new approach to thermal diffusivity measurement. • Short-range and intermediate-range order of alkaline earth borate structure is studied using high-resolution MAS-NMR, Raman spectroscopy and XPS for a precise and comprehensive insight into structure-conductivity relationship. • Compositional dependence of thermal conductivity is revealed with the discussion on “boron anomaly” phenomenon in alkaline earth borate melts. In this work, the thermal conductivity of alkaline earth borate melts was measured using hot-wire method from 1323 to 1623 K, and the thermal diffusivity was extrapolated from the thermal conductivity and heat capacity. The compositional dependence of thermophysical properties was interpreted according to the structure in short-range and intermediate-range order. Based on the Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and 11 B magic-angle spinning nuclear magnetic resonance (MAS-NMR) spectra, modifier cation with higher field strength prefers the formation of non-bridging oxygens (NBOs) for the charge compensation at high BO 1.5 / M O ratios. A lower amount of covalent bond and greater isolation of large borate groups lead to a lower thermal conductivity in calcium borate melt compared with strontium and barium borates. But the large size of Ba 2+ encounters difficulty in fitting around B [4] -O-B [4] linkages inside the overcrowded large borate groups when BO 1.5 /BaO = 2.5, promoting the formation of NBOs on the edge of borate groups for the charge compensation of modifier cations and leading to the decline in the thermal conductivity. Thermal conductivity plays a major role in regulating the thermal diffusivity at a given temperature since the compositional dependence of volumetric heat capacity is relatively weak compared with that of thermal conductivity.

Elucidation of Enhanced Lithium Conductivity in Nanoporous Ionogel Using Solid State NMR

AbstractNanostructured solid composite electrolyte or nano‐SCE, which is composed of an ionic liquid, nanoporous silica, and residuals of immobilized precursor components, shows promising synergistic properties. The ionic conductivity of nano‐SCE is in the range of 2–5 mS cm−1, which exceeds the bulk ionic liquid conductivity at ambient temperature, while maintaining characteristics of a solid electrolyte such as having no leakage issues as the ionic liquid is confined, and lower flammability compared to conventional liquid electrolytes. In this study, the underlying mechanism of enhanced conductivity is investigated by using magic angle spinning NMR and NMR relaxometry analysis. Water, one of the volatile precursor molecules has shown to play a key role in the final conductivity and stability at the solid‐electrolyte interface, as it enhances the temperature range in which the ionic liquid remains mobile. In line with previous studies, water with lowered mobility is found in the silicon matrix. The activation energies of lithium ion transfer probed by NMR relaxometry, however, do not change as function of water content. The increase in bulk mobility of lithium ions under ambient conditions compared to water‐less nano‐SCE is found to be the origin of the altered conductivity of this material.

Crystallographic and Physicochemical Analysis of Bovine and Human Teeth Using X-ray Diffraction and Solid-State Nuclear Magnetic Resonance.

Dental research often uses bovine teeth as a substitute for human teeth. The aim of this study was to evaluate differences in the crystalline nanostructures of enamel and dentin between bovine and human teeth, using X-ray diffraction (XRD) and solid-state nuclear magnetic resonance (NMR). The crystallite size (crystallinity) and microstrains were analyzed using XRD with the Rietveld refinement technique and the Halder-Wagner method. The 31P and 1H NMR chemical environments were analyzed by two-dimensional (2D) 1H-31P heteronuclear-correlation (HETCOR) magic-angle spinning (MAS) NMR spectroscopy. Enamel had a greater crystallite size and fewer microstrains than dentin for both bovine and human teeth. When compared between the species, the bovine apatite had a smaller crystallite size with more microstrains than the human apatite for both dentin and enamel. The 2D HETCOR spectra demonstrated that a water-rich layer and inorganic HPO4- ions were abundant in dentin; meanwhile, the hydroxyl group in the lattice site was more dominant in enamel. A greater intensity of the hydroxyl group was detected in human than in bovine for both dentin and enamel. For 31P projections, bovine dentin and bovine enamel have wider linewidths than human dentin and human enamel, respectively. There are differences in the crystallite profile between human and bovine. The results of dental research should be interpreted with caution when bovine teeth are substituted for human teeth.

Effect of Immersion Time in Chloride Solution on the Properties of Structural Rebar Embedded in Alkali-Activated Slag Concrete

The electrochemical impedance spectroscopy (EIS) technique is widely used in the study of the corrosion of metallic materials. This method also allows for the electrical characterization at the ceramic–metal interface in contact with an aqueous solution composed of chloride ions. EIS makes it possible to discriminate the contribution of the phenomena that occur in the interface to determine the porosity of the cementitious material. The porosity determines the degree of corrosion of the metallic material and the diffusion processes on the electrode surface. In this study, the degradation of a type of non-Portland cement obtained from blast furnace steel slag and activated alkali was evaluated. This type of cement is of great interest because it avoids the emission of CO2 during its manufacture. Estimating the porosity determined the degree of deterioration suffered by the steel embedded in the concrete as a function of the evaluation time. The hydrated samples were also characterized by 29Si magic angle spinning nuclear magnetic resonance (MAS-NMR) to determine the structure of the formed calcium silicate hydrate (C-S-H) gel. This mixture formed a C-S-H gel, constituted mainly of silicon in the middle groups, in chains in the disilicates. The effect of the slag was remarkable in improving the other evaluated characteristics, i.e., in the porous matrix, the concrete was found to significantly reduce the current passing through as a function of time, showing a reduction in porosity and an increase in impedance because of the generated pozzolanic reaction.

Direct Identification of Zeolite Beta Polymorphs by Solid-State 29Si Nuclear Magnetic Resonance Spectroscopy.

Stacking disorder and polymorphism in zeolite and zeolite-like materials hinder their structural characterization. In this work, we propose an advanced approach based on applying "pure shift" solid-state 29Si nuclear magnetic resonance (NMR) spectroscopy for the structural investigation of zeolitic materials containing intergrown polymorphs. The approach developed in the case study of zeolite beta allows for the resolution of 21 29Si signals, attributing them to non-equivalent T sites in polymorphs A, B, and C, reconstruction of individual 29Si magic angle spinning NMR spectra for each polymorph, and determination of the polymorph composition with higher accuracy than X-ray diffraction. The results reveal that two widely used synthetic routes for zeolite beta, alkaline and fluoride synthesis, lead to different polymorph compositions. These findings indicate that "pure shift" solid-state 29Si NMR can serve as a superior tool for the elucidation of polymorphism in zeolites.

Magic-angle-spinning NMR structure of the kinesin-1 motor domain assembled with microtubules reveals the elusive neck linker orientation

Microtubules (MTs) and their associated proteins play essential roles in maintaining cell structure, organelle transport, cell motility, and cell division. Two motors, kinesin and cytoplasmic dynein link the MT network to transported cargos using ATP for force generation. Here, we report an all-atom NMR structure of nucleotide-free kinesin-1 motor domain (apo-KIF5B) in complex with paclitaxel-stabilized microtubules using magic-angle-spinning (MAS) NMR spectroscopy. The structure reveals the position and orientation of the functionally important neck linker and how ADP induces structural and dynamic changes that ensue in the neck linker. These results demonstrate that the neck linker is in the undocked conformation and oriented in the direction opposite to the KIF5B movement. Chemical shift perturbations and intensity changes indicate that a significant portion of ADP-KIF5B is in the neck linker docked state. This study also highlights the unique capability of MAS NMR to provide atomic-level information on dynamic regions of biological assemblies.

Correlation of structure and ionic-conductivity in phosphate glass using MAS-NMR and impedance spectroscopy: Influence of sodium salt

In the process of diminishing the safety concerns of sodium-ion batteries, the development of glass-based solid electrolyte materials has received adequate interest. Nevertheless, achieving a high ionic-conductivity at room temperature for glass materials remains a challenging task because of the poor correlation between the conductivity and the glass structure. Here, we attempt to understand the effective influence of NaCl on the structure and ionic-conductivity of the phosphate-based glass network. For this study, $x\mathrm{NaCl}\text{\ensuremath{-}}(100\text{\ensuremath{-}}x$) ($31.725\phantom{\rule{4pt}{0ex}}{\mathrm{Na}}_{2}\mathrm{O}\text{\ensuremath{-}}12.69\phantom{\rule{0.16em}{0ex}}{\mathrm{Al}}_{2}{\mathrm{O}}_{3}\text{\ensuremath{-}}31.725\phantom{\rule{0.16em}{0ex}}{\mathrm{P}}_{2}{\mathrm{O}}_{5}\text{\ensuremath{-}}8.46\phantom{\rule{0.16em}{0ex}}\mathrm{NaF}\text{\ensuremath{-}}5.40\phantom{\rule{0.16em}{0ex}}{\mathrm{Na}}_{2}{\mathrm{SO}}_{4}\text{\ensuremath{-}}10\phantom{\rule{0.16em}{0ex}}{\mathrm{MoO}}_{3}$) glass systems (mol %) were selected, where $x=0$, 5, 10, 15, and 20 mol %. To investigate structural changes with the addition of different NaCl concentrations, $^{27}\mathrm{Al}, ^{23}\mathrm{Na}, ^{31}\mathrm{P}$ magic angle spinning nuclear magnetic resonance (MAS-NMR), $^{31}\mathrm{P}$ two-dimensional (2D) phase-adjusted spinning sideband (PASS), and $^{31}\mathrm{P}$ 2D J-resolved NMR techniques and Raman spectroscopic techniques were utilized. Impedance spectroscopy and ac conductivity spectra were used to assess ionic-conductivity and sodium-ion dynamics, respectively. Impedance spectral analysis reveals that the ionic-conductivity of the base glass is increased by 2.4 times (from 1.85 \ifmmode\times\else\texttimes\fi{} ${10}^{\ensuremath{-}7}$ to 4.44 \ifmmode\times\else\texttimes\fi{} ${10}^{\ensuremath{-}7}$ S/cm at 373 K) with the addition of 20 mol % of NaCl. Raman spectra confirm the presence of P\ensuremath{-}O\ensuremath{-}Mo and the absence of Mo\ensuremath{-}O\ensuremath{-}Mo bonds in these glass systems, and $^{31}\mathrm{P}$ 2D J-resolved spectra indicate the absence of P\ensuremath{-}O\ensuremath{-}P bonds. Upon increasing the NaCl concentration, significant changes in the shapes of $^{31}\mathrm{P}$ and $^{27}\mathrm{Al}$ MAS-NMR spectra were observed, indicating the effective influence of NaCl on the distribution of alumina and phosphorus structural units. Irrespective of the temperature, sodium-ion dynamic studies show that the mean-square displacement $\ensuremath{\langle}{R}^{2}({t}_{p})\ensuremath{\rangle}$ decreases with increasing NaCl concentration up to 10 mol % and then increases with a further increase in NaCl concentration. This investigation aids in understanding the sodium-ion dynamics and the structural information of a multicomponent glass system to enhance the room-temperature conductivity.

Cell-free synthesis of amyloid fibrils with infectious properties and amenable to sub-milligram magic-angle spinning NMR analysis

Structural investigations of amyloid fibrils often rely on heterologous bacterial overexpression of the protein of interest. Due to their inherent hydrophobicity and tendency to aggregate as inclusion bodies, many amyloid proteins are challenging to express in bacterial systems. Cell-free protein expression is a promising alternative to classical bacterial expression to produce hydrophobic proteins and introduce NMR-active isotopes that can improve and speed up the NMR analysis. Here we implement the cell-free synthesis of the functional amyloid prion HET-s(218-289). We present an interesting case where HET-s(218-289) directly assembles into infectious fibril in the cell-free expression mixture without the requirement of denaturation procedures and purification. By introducing tailored 13C and 15N isotopes or CF3 and 13CH2F labels at strategic amino-acid positions, we demonstrate that cell-free synthesized amyloid fibrils are readily amenable to high-resolution magic-angle spinning NMR at sub-milligram quantity.

Hyaluronic acid-based hydrogels: Drug diffusion investigated by HR-MAS NMR and release kinetics

Hydrogels based on hyaluronic acid (HA) and agarose-carbomer (AC) raised an increasing interest as drug delivery systems. The complex architecture of the polymer network, such as mesh size, HA molecular weight and drug-polymer non covalent interactions across the 3D polymer matrix strongly influence the release capability/profile of these materials. In this study, AC-HA hydrogels with different mesh sizes have been prepared and characterised. High Resolution Magic Angle Spinning (HR-MAS) NMR spectroscopy has been used to investigate the motion of two drugs, such as ethosuximide (neutral molecule) and sodium salicylate (net negative charge) within the AC and AC-HA hydrogel networks. Analysis of the experimental data provides evidence of superdiffusive motion for all formulations containing sodium salicylate, while ethosuximide molecules undergo unrestricted diffusion within the gel matrix. We further speculate that the superdiffusive motion, observed at the nanoscale, can be responsible for the faster release of sodium salicylate from all hydrogel formulations.

Studies on the local structure of the F ∕ OH site in topaz by magic angle spinning nuclear magnetic resonance and Raman spectroscopy

Abstract. The mutual influence of F and OH groups in neighboring sites in topaz (Al2SiO4(F,OH)2) was investigated using magic angle spinning nuclear magnetic resonance (MAS NMR) and Raman spectroscopy. The splitting of 19F and 1H NMR signals, as well as the OH Raman band, provides evidence for hydrogen bond formation within the crystal structure. Depending on whether a given OH group has another OH group or fluoride as its neighbor, two different hydrogen bond constellations may form: either OH⋯O⋯HO or F⋯H⋯O. The proton accepting oxygen was determined to be part of the SiO4 tetrahedron using 29Si MAS NMR. Comparison of the MAS NMR data between an OH-bearing and an OH-free topaz sample confirms that the 19F signal at −130 ppm stems from F− ions that take part in H⋯F bonds with a distance of ∼ 2.4 Å, whereas the main signal at −135 ppm belongs to fluoride ions with no immediate OH group neighbors. The Raman OH sub-band at 3644 cm−1 stems from OH groups neighboring other OH groups, whereas the sub-band at 3650 cm−1 stems from OH groups with fluoride neighbors, which are affected by H⋯F bridging. The integrated intensities of these two sub-bands do not conform to the expected ratios based on probabilistic calculations from the total OH concentration. This can be explained by (1) a difference in the polarizability of the OH bond between the different hydrogen bond constellations or (2) partial order or unmixing of F and OH, or a combination of both. This has implications for the quantitative interpretation of Raman data on OH bonds in general and their potential use as a probe for structural (dis-)order. No indication of tetrahedrally coordinated Al was found with 27Al MAS NMR, suggesting that the investigated samples likely have nearly ideal Al/Si ratios, making them potentially useful as high-density electron microprobe reference materials for Al and Si, as well as for F.

High-Field Nuclear Magnetic Resonance Studies Reveal New Structural Landscape of Sulfur-Vulcanized Natural Rubber.

Despite intensive research efforts over the past 3 decades, the structural analysis of sulfur-vulcanized natural rubber (NR) remains challenging owing to the complexity and low population of its sulfur moieties. Herein, solid vulcanized NR samples and NR samples reacted with sulfur and other reactants in an organic solvent were analyzed by solid-state NMR with fast magic-angle spinning and solution NMR, respectively. The present high-field two-dimensional NMR analysis revealed six novel sulfur moieties in these samples, including cyclic sulfides, cyclic di/polysulfides, and crosslinked structures with a vinylidene group. While previous studies reported a variety of sulfur-crosslinked structures in NR, our analysis identified only two dominant types of crosslinked structures that matched those reported previously. Our NMR assignments for the crosslinked structures were inconsistent to a large extent with those presented in the previous studies; thus, in the current work, the crosslinked structures were reassigned using the new data. Based on quantitative NMR analysis, this study also provides the first tangible evidence that cyclic rather than crosslinked sulfides can be the dominant sulfur moieties in vulcanized NR. These results may drastically alter the previously established structural landscape of sulfur-vulcanized NR.

Acidic Centers on the Surface of a Crystalline α-Sn(IV) Phosphate Characterized by the Solid-State 1H, 2H, 31P, and 119Sn MAS NMR Techniques.

A layered crystalline phosphate α-Sn(HPO4)2·H2O (1), prepared and characterized in the present study by the multinuclear solid-state nuclear magnetic resonance (NMR), powder X-ray diffraction, and thermogravimetric analysis techniques, was treated with D2O and HOD imitating the reaction conditions in a water medium. The 2H solid-echo magic angle spinning NMR spectra of the products have revealed on their surface low mobile water molecules and hydronium ions, forming a structure close to the Zundel cation, [D2O···D-OD2]+. All the deuterons in the hydronium ions are tangled by hydrogen bonds with the water and the surface phosphate groups and stabilized by ionic interactions.

(Invited) Unravelling Water-Ion Dynamics in Reverse Osmosis Membranes with Nuclear Magnetic Resonance Spectroscopy

Fundamental understanding of the charge (ions and water) transport in polymeric membranes used at the forefront of the water-energy nexus challenge is yet uncertain and depends on the complex interplay between polymer structure and dynamics that facilitate transport. Herein, we investigated the dynamics-transport of proton and ion transport in a rather neutrally charged organic membrane (i.e., polyamide) using solid-state NMR spectroscopy. Specifically, the role of competing ions' effect in complex ionic mixtures at the membrane interface has been explored on a molecular level. Proton and sodium ion diffusion measurements are made using pulsed-field gradient NMR diffusometry. The energy barriers for proton and ion transport within the active layer of the reverse osmosis (RO) membrane are assessed using magic angle spinning (MAS) and static NMR spectral line shape analysis. We have investigated the dynamics-transport of water and sodium ions in complex ionic mixtures of polyamide polymeric media using solid-state NMR spectroscopy. Through monitoring 13C, 23Na, and 1H NMR nuclei, quantitative insights into the diffusion of water (1H), sodium mobile ion (Na+), and polymer membrane dynamics (13C) are extrapolated. Furthermore, the spin-lattice (T1) relaxation time of sodium and water ions is investigated to obtain quantitative insight into how sodium and water ions’ rotational movements occur in the absence and presence of other competing seawater cations such as potassium. Room temperature spectra and spin-lattice relaxation times indicated the presence of both mobile and rigidly held ionic species in the membrane at different levels of relative humidity. The concentration and temperature dependence of relaxation times and chemical shifts have been investigated. NMR relaxation measurements detect how the water rotation is modified by sodium and potassium cations in the membrane. Results show that at low relative humidity and in the presence of competing ions, there are sodium ion resonances for crystalline sodium ions and rigidly held sodium ions on the surface. With increasing relative humidity and decreasing competing ions, the resonance suggests solution-like dynamic rotational movements of sodium ions in polyamide. The results confirm the change in activation energy barrier for sodium and hydrogen ion permeation in polyamide upon the presence of potassium ions.

Initiated Chemical Vapor Deposited Anion-Conducting Solid-State Polymeric Electrolytes for All Solid-State Batteries: Impacts of Deposition Conditions and Polymer Composition on Performance Metrics

Achieving both high energy and power density, two traditionally opposed battery metrics, requires moving away from the 200+ years-old 2D layered battery configuration to a three-dimensional all solid-state battery (3D SSB) configuration. The enhanced power and energy benefits bestowed by a 3D SSB design have been demonstrated in the Li-ion 3D SSB literature.1 However, due to limitations in thermal and electronic conductivity of Li-Ion active materials, 3D Li-ion SSBs are limited to microscale dimensions. A potential means around this limitation is to switch to conductive metal electrodes such as Zn and Ag, for which 3D architectures have been demonstrated.2 In such a case, the remaining roadblock to a macroscale 3D SSB is the submicron-thick solid-state electrolyte, which requires a non-line-of-sight deposition method for incorporation into the complex 3D base electrode. Initiated chemical vapor deposition (iCVD) is a non–line-of-sight method that is ideal for generating conformal polymer coatings on complex 3D architectures. We focus on polymers amenable to iCVD protocols that can be modified post-deposition to introduce anion conduction pathways that can facilitate Ag and Zn redox. Submicron-thick coatings of poly-dimethylaminomethylstyrene (pDMAMS) that are pinhole-free and electronically insulating on both 2D planar and complex 3D electrode architectures are prepared via iCVD. The pDMAMS coatings are rendered anion-conducting through a vapor-phase methylation process and subsequent ion exchange to yield desirable anion species (e.g., OH–, Br–, or HCO3 –). X-ray photoelectron spectroscopy, ATR-IR spectroscopy, and solid-state magic-angle spinning NMR spectroscopy confirm the structure of the pDMAMS film before and after quaternization, while atomic force microscopy and cyclic voltammetry with redox probes confirm conformality and absence of pinholes in the submicron film. With the use of cyclic voltammetry and AC electrochemical impedance spectroscopy, the electronic and ionic conductivities of the polymer films are measured before and after quaternization. Molecular dynamics simulations of pDMAMS as a function of anion and H2O content in the film are used to generate computational results (e.g., glass-transition temperature Tg, anion conductivity) for comparison to experimental results.1. Long, J.W.; Dunn, B.; Rolison, D.R.; White, H.S. Chem. Rev. 2004, 104, 10, 4463–4492.2. Parker, J.F.; Chervin, C.N.; Nelson, E.S.; Rolison, D.R.; Long, J.W. Energy Environ Sci. 2014, 7, 1117-1124.