Macromolecular Reversible Addition-fragmentation Chain Transfer Research Articles

Multi-functional RAFT reagent to prepare fluorescent hyper-branched macromolecular probes for the detection of Fe3+ ions

Reversible addition-fragmentation chain transfer (RAFT) polymerization has the advantages of precise control, high yield, and narrow molecular weight distribution. These merits make it an ideal method for the preparation of hyper-branched fluorescent polymers (FL-HBPs). In this work, a multi-functional RAFT reagent (AVCT-NLP) was prepared for the synthesis of monodisperse FL-HBPs. Firstly, dithionate compound (CN1) containing a CC double bond was synthesized by the reaction of 4-nitrophenol with 1-(bromomethyl)-4-vinylbenzene. Subsequently, the NO2 group on CN1 was reduced to NH2, and the −Br on the 4-bromo-1,8-naphthalic anhydride was substituted to emit fluorescence. Finally, the fluorophore was introduced by the reaction of NH2 with the anhydride on the naphthalene ring to obtain AVCT-NLP which contains fluorophore, dithionate, and CC double bond in one molecule. AVCT-NLP was then used to synthesize the homopolymer (PAVCT-NLP) as both monomer and RAFT reagent. Moreover, PAVCT-NLP served as a macromolecular RAFT reagent, and hydrophilic monomer methacrylic acid (MAA) or 3-butene-1,2-diol were polymerized to obtain amphiphilic hyper-branched polymers (FL-AHBP-1, FL-AHBP-2). All the as-prepared macromolecules (PAVCT-NLP, FL-AHBP-1, and FL-AHBP-2) exhibited specific recognition and high sensitivity for Fe3+. The fluorescence quenching reached up to 74.4 %, with the limit of detection (LOD) as low as 1.82 nM. Additionally, the probe demonstrated pH stability and environmental adaptability. Due to the multi-functional structures of AVCT-NLP, it could be subjected to RAFT polymerization to obtain a monodisperse hyper-branched polymer. All polymers have a high fluorophore density and the polydispersity index (PDI) of the polymer is close to 1.00. This paper provided an effective approach for synthesizing polymer fluorescent probes with versatile structure and fluorescence properties in future applications.

Versatile morphology transition of nano-assemblies via ultrasonics/microwave assisted aqueous polymerization-induced self-assembly based on host–guest interaction

Nano-assemblies have wide applications in biomedicine, functional coatings, Pickering emulsifiers, hydrogels, and so forth. The preparation of assemblies mainly utilizes the polymerization-induced self-assembly (PISA) method, which can produce high-concentration nanoscale assemblies in one step. However, the initiation processes of most reported PISA are limited to thermal initiation. Here, we reported two green and efficient methods for synthesizing nano-assemblies with various morphologies using ultrasound (20 kHz)/ microwave (500 W) assisted aqueous-phase RAFT-PISA in 3 h and 1 h. Cyclodextrin (CD) and styrene (St) nucleating monomer were complexed in a 1:1 ratio. Then, using Poly (ethylene glycol) methyl ether as the macromolecular reversible addition-fragmentation chain transfer (RAFT) agent (PEG-CTA) to control the CD/St complexes, the conversion rate of St monomer was respectively 27 %–60 %, 20 %–30 % within 3 h and 1 h under ultrasonics/microwave assisted PISA. Results showed that the morphologies of the assemblies are not only related to the length of PS block, but also to the assistance types and the remaining monomer concentration. The results showed that only PEG45-b-PS90 and PEG45-b-PS241 assemblies prepared by ultrasonics assisted PISA form evolved lamellaes and vesicles (100 nm), which break through the limitation of kinetic freezing. But the ultrasonic reaction on morphology of assemblies is not all favourable. For one thing, it can promote the movement of particles; for another, it makes reverse morphology transformation and sphere is preferred morphology. Therefore, the main reason of morphology evolution is the remaining monomer concentration of PEG45-b-PS90 and PEG45-b-PS241 assemblies reaches to 55 %–65 %, which promoting the segment movement. The results showed that the morphology of the assemblies prepared by microwave assisted PISA changed from spherical micelles to short rods, and finally to vesicles (120–140 nm) as the length of hydrophobic PS block increases. The kinetic freezing problem was solved in microwave-assisted PISA due to the action of microwaves and more remaining monomer concentration. Both them can boost particles movement.

Preparation of diblock copolymer nano-assemblies by ultrasonics assisted ethanol-phase polymerization-induced self-assembly

Assemblies are widely used in biomedicine, batteries, functional coatings, Pickering emulsifiers, hydrogels, and luminescent materials. Polymerization-induced self-assembly (PISA) is a method for efficiently preparing particles, mainly initiated thermally. However, thermally initiated PISA usually requires a significant amount of time and energy. Here, we demonstrate the preparation of nano-assemblies with controllable morphologies and size using ultrasound (20 kHz) assisted ethanol-phase RAFT-PISA in three hours. Using poly (N, N-dimethylaminoethyl methacrylate) as the macromolecular reversible addition-fragmentation chain transfer agent (PDMA-CTA) to control the nucleating monomer benzyl methacrylate (BzMA), we obtained nano-assemblies with different morphologies. With the length of hydrophobic PBzMA block growth, the morphologies of the assemblies at 15 wt% solid content changed from spheres to vesicles, and finally to lamellae; the morphologies of the assemblies at 30 wt% changed from spheres micelles to short worms, then vesicles, and finally to large compound vesicles. With the same targeted degree of polymerization, nano-assemblies having a 30 wt% solid content display a more evolved morphology. The input of ultrasonic energy makes the system have higher surface free energy, results the mass fraction interval of solventphilic blocks (fhydrophilic) corresponding to the formation of spherical micelles is expanded from fhydrophilic > 45 % to fhydrophilic > 31 % under ultrasound and the fhydrophilic required to form worms, vesicles, and large composite vesicles decreases in turn. It is worth noting that the fhydrophilic interval of worms prepared by ultrasonics assisted PISA gets larger. Overall, the highly green, externally-regulatable and fast method of ultrasonics assisted PISA can be extended to vastly different diblock copolymers, for a wide range of applications.

ABC or ACB triblock copolymers? Changing the RAFT group position in diblock copolymer macro-RAFT agents leads to different PISA behaviors in RAFT dispersion polymerization

ACB and ABC triblock copolymer nanoparticles were prepared by reversible addition–fragmentation chain transfer (RAFT) dispersion polymerization using diblock copolymer macromolecular RAFT (macro-RAFT) agents with different RAFT group positions.

Linear and Star Block Copolymer Nanoparticles Prepared by Heterogeneous RAFT Polymerization Using an ω,ω-Heterodifunctional Macro-RAFT Agent.

Herein, an ω,ω-heterodifunctional macromolecular reversible addition-fragmentation chain transfer (macro-RAFT) agent containing two different RAFT end groups was synthesized and employed to mediate aqueous photoinitiated RAFT dispersion polymerization of a methacrylic monomer. Because of the different RAFT controllability of two RAFT end groups toward methacrylic monomers, the RAFT end group with good controllability dominated the polymerization while the other RAFT end group with poor controllability was unreacted, leading to the formation of linear block copolymers. Because of the unique structure of the linear block copolymers, a diverse set of block copolymer nanoparticles with rich RAFT groups at the interface of the hydrophilic corona/the hydrophobic core were successfully prepared. Finally, μ-A(BC)C miktoarm star block copolymer nanoparticles were prepared by RAFT seeded emulsion polymerization of an acrylic monomer, which enables the further morphological control over polymer nanoparticles. We believe that the utilization of an ω,ω-heterodifunctional macro-RAFT agent in heterogeneous RAFT polymerization will offer considerable opportunities for the rational synthesis of well-defined molecular architectures and polymer nanoparticles.

Polymer/C.I. Pigment Red 170 hybrid latexes prepared by RAFT-mediated surfactant-free emulsion polymerization

By using organic pigment-based ink-jet inks, the digital ink-jet printing of textiles is one kind of environmentally friendly technology for cleaner dyeing. Due to the shortcomings of easy agglomeration and poor water dispersion stability of organic nanoparticles, however, the encapsulation and dispersion of organic pigment nanoparticles are also hot and difficult research problems. In this work, we report the reversible addition-fragmentation chain transfer (RAFT) polymerization technology was used to synthesize random copolymer of 2-(dimethylamino) ethyl methacrylate (DMAEMA), poly(ethylene glycol) methyl ether methacrylate (PEGA), and methyl methacrylate (MMA) or butyl acrylate (BA) with a trithiocarbonate reactive end-group. These cationic macromolecular RAFT agents (macro-RAFT) with a pH of 5 were subsequently adsorbed at the surface of size-monodisperse colloidal Pigment Red 170 particles. The absorbed macro-RAFT agents were considered to be the living points to mediate the RAFT polymerization of monomers (MMA and BA) by starved feed emulsion polymerization. TEM results shown that the resulting hybrid latexes synthesized in presence of the tri-copolymer macro-RAFT agents resulted in the formation of individually encapsulated pigment particles. In addition, the dynamic light scattering (DLS), zeta potential and stability tests found that the macro-RAFT agent participated in the growing latex stabilization which is the key to obtaining the stable and uniform core-shell hybrid latex. More importantly, the preparation of film-forming copolymer/pigment hybrid latex in this study shown that the high potential of the P(DMAEMA- co -PEGA- co -MMA or BA) macro-RAFT agent for the development of polymer-pigment hybrid latexes which has good application properties. • Cationic and brush-type macro-RAFT agents were synthesized through RAFT polymerization. • Amphiphilic macro-RAFT agent has good adsorption and dispersion properties for the C.I. Pigment Red 170. • The film-forming polymers with lower T g are successfully encapsulated on the surface of pigment. • The encapsulated polymer/pigment hybrid latexes exhibit excellent dispersion stability with freeze-thaw, storage and pH.

Polymer/Laponite Nanocomposite Films Produced from Surfactant-Free Latexes using Cationic Macromolecular Reversible Addition-Fragmentation Chain Transfer Copolymers

In this work, the use of positively charged macromolecular reversible addition-fragmentation chain transfer (RAFT) copolymers (macro-RAFTs) in the synthesis of Laponite RD-based nanocomposite latex particles is described. For this purpose, two different amphiphilic copolymers composed of 2-(dimethylamino)ethyl methacrylate (DMAEMA) and nbutyl acrylate (BA) units are investigated. In the first step, the macroRAFT is adsorbed onto Laponite, and then, in the second step, the macroRAFTmodified clay platelets are used in the emulsion copolymerization of methyl methacrylate (MMA), methyl acrylate (MA), or styrene (Sty), with BA. By acting as both coupling agents and stabilizers, the macroRAFT agents lead to the formation of partially encapsulated particles and dumbbell structures. When hydrophobic monomer mixtures that can form film are used, these morphologies result in nanocomposite films with increased stiffness, in comparison to the pure polymer matrix. As observed by dynamic mechanical analysis, the high Young's modulus level presented by the composite films in the rubbery plateau (above 100 MPa when filled with 10 wt% of clay) highlights the strong mechanical reinforcement. Such an improvement can be attributed to the formation of two percolating networks, one of homogeneously distributed and connected platelets and one of macroRAFT chains, within the polymer matrix.

Synthesis and properties of styrenic triblock copolymers with dual structural asymmetry via RAFT emulsion polymerization

The polystyrene-block-poly(n-butyl acrylate)-block-polystyrene (PSt-b-PBA-b-PSt, SBAS) triblock copolymers (TBCPs) with dual structural asymmetry were synthesized via a reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization. The dual structural asymmetry contained two asymmetric outer PSt blocks and a single short ionic block on one chain end while the SBAS TBCPs had the almost same molecular weight (~100 kDa) and composition (~70 wt% of PSt and ~30 wt% of PBA) excluding the short ionic block. The dual structural asymmetry with a synergistic effect was designed by locating the long PSt block near the short ionic block that was derived from ionic macromolecular RAFT agent. With the SBAS TBCPs having microphase separation structure, the structural asymmetry of two outer PSt blocks tailored the interaction of PSt and PBA blocks, further leading to the change of static tensile and dynamic mechanical properties, and rheology. Structural asymmetry will provide an alternative to tailor-made properties of TBCPs.

Preparation of ABA triblock copolymer assemblies through “one-pot” RAFT PISA

Poly(N,N-dimethyl acrylamide)-block-poly(styrene)-block-poly(N,N-dimethyl acrylamide) (PDMAc-b-PSt-b-PDMAc) amphiphilic triblock copolymer micro/nano-objects were synthesized through reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of St mediated with poly(N,N-dimethyl acrylamide) trithiocarbonate (PDMAc-TTC-PDMAc) bi-functional macromolecular RAFT agent. It is found that the morphology of the PDMAc-b-PSt-b-PDMAc copolymer micro/nano-objects like spheres, vesicles and vesicle with hexagonally packed hollow hoops (HHHs) wall can be tuned by changing the solvent composition. In addition, vesicles with two sizes (600 nm, 264 nm) and vesicles with HHHs features were also synthesized in high solid content systems (30 wt% and 40 wt%, respectively). Besides, as compared with typical AB diblock copolymers (A is the solvophilic, stabilizer block, and B is the solvophobic block), ABA triblock copolymers tend to form higher order morphologies, such as vesicles, under similar conditions. The finding of this study provides a new and robust approach to prepare block copolymer vesicles and other higher order micelles with special structure via PISA.

Interaction of Cationic, Anionic, and Nonionic Macroraft Homo- and Copolymers with Laponite Clay.

The functionalization of Laponite RD platelets with different cationic, anionic, and nonionic homo- and copolymers synthesized by reversible addition-fragmentation chain transfer (RAFT) has been investigated. The effective interaction of the macromolecular RAFT agents (macroRAFTs) with the inorganic particles is known to be of crucial importance for the successful coating of minerals with polymers via RAFT-mediated emulsion polymerization to produce polymer-encapsulated inorganic particles. The macroRAFT agents synthesized in the present work contain carefully selected reinitiating R groups, which bear either ionizable tertiary amine or quaternary ammonium moieties (from 2-(dimethylamino)ethyl methacrylate, DMAEMA), negatively charged acrylic acid (AA) repeat units, or neutral polyethylene glycol (PEG) side chains, and are capable of interacting with Laponite via different adsorption mechanisms. The equilibrium adsorption of these RAFT (co)polymers was investigated by the plotting of adsorption isotherms, and either L-type or H-type curves were obtained. The hydrophobicity of the macroRAFT was shown to promote adsorption, as did the pending configuration of the PEG block. Charge repulsion between AA and the negatively charged surface of Laponite at pH 7.5, on the other hand, was prejudicial for adsorption, while the strong electrostatic interaction between the cationic DMAEMA molecules and the Laponite surface led to high-affinity-type curves.

Thermal stability of RAFT-based poly(methyl methacrylate): A kinetic study of the dithiobenzoate and trithiocarbonate end-group effect

Thermal stability of dithiobenzoate- (DB) and trithiocarbonate- (TC) terminated poly(methyl methacrylate) (PMMA) synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization is systematically studied under dynamic heating and prolonged isothermal treatment at 100–180 °C. It is demonstrated that in the presence of functional end-groups the onset of mass loss can be shifted relative to conventional PMMA, either toward higher (PMMA-DB) or lower (PMMA-TC) temperatures. Irrespective of the polymer molar mass, a loss of PMMA chain-end functionality clearly manifests itself upon 24 h of isothermal treatment at 120 °C for DB end-groups and already at 100 °C for TC ones. At 120 °C (for PMMA-TC) and 140 °C (for PMMA-DB) the ability of both polymers to serve as macromolecular RAFT agents in the chain extension processes ceases almost completely. The kinetics of functional end-groups elimination depends on their chemical nature. In the case of DB-groups, the reaction is of the first order, whereas TC-groups containing two CS bonds demonstrate more complex degradation kinetics. We propose a two-step mechanism of TC-group elimination, which enables interpretation of the observed experimental data.

Ketone-Functionalized Polymer Nano-Objects Prepared via Photoinitiated Polymerization-Induced Self-Assembly (Photo-PISA) Using a Poly(diacetone acrylamide)-Based Macro-RAFT Agent.

Herein, ketone-functionalized diblock copolymer nano-objects are prepared by photoinitiated reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of tert-butyl acrylate (tBA) using a poly(diacetone acrylamide) (PDAAM)-based macromolecular RAFT (macro-RAFT) agent in ethanol/water (60/40, w/w) at room temperature. A high polymerization rate is observed via the exposure of visible light (λmax = 405 nm, 0.45 mW cm-2 ) with near quantitative monomer conversion being achieved within 60 min. A morphological phase diagram is constructed by changing the degree of polymerization (DP) of PtBA and the monomer concentration. The morphologies of polymer nano-objects are further tuned by incorporating isobornyl acrylate (IBOA) into the core-forming block. The ketone-functionalized diblock copolymer nano-objects can be shell-cross-linked by reacting with a diamine. Finally, the shell-cross-linked polymer nano-objects are further hydrolyzed and employed as a template for the synthesis of silver composites.

Beyond Simple AB Diblock Copolymers: Application of Bifunctional and Trifunctional RAFT Agents to PISA in Water.

The influence of the macromolecular reversible addition-fragmentation chain transfer (macro-RAFT) agent architecture on the morphology of the self-assemblies obtained by aqueous RAFT dispersion polymerization in polymerization-induced self-assembly (PISA) is studied by comparing amphiphilic AB diblock, (AB)2 triblock, and triarm star-shaped (AB)3 copolymers, constituted of N,N-dimethylacrylamide (DMAc = A) and diacetone acrylamide (DAAm = B). Symmetrical triarm (AB)3 copolymers could be synthesized for the first time in a PISA process. Spheres and higher order morphologies, such as worms or vesicles, could be obtained for all types of architectures and the parameters that determine their formation have been studied. In particular, we found that the total DPn of the PDMAc and the PDAAm segments, i.e., the same overall molar mass, at the same Mn (PDMAc)/Mn (PDAAm) ratio, rather than the individual length of the arms determined the morphologies for the linear (AB)2 and star shaped (AB)3 copolymers obtained by using the bi- and trifunctional macro-RAFT agents.

Grafting poly(N,N-dimethylacrylamide) from cellulose nanocrystals by the macro-RAFT agent-assisted strategy

Polymer grafting is an efficient way to obtain functional cellulose nanocrystals. In this work, we used a “macro-RAFT (macromolecular reversible addition–fragmentation chain transfer) agent-assisted” strategy, which adds extra amount of amphiphilic macro-RAFT agent with low molecular weight to graft poly(N,N-dimethylacrylamide) (PDMA) from cellulose nanocrystals. Successful grafting was evidenced by different characterization methods, and a high weight ratio of grafted PDMA was obtained (77.6%). The grafting process was studied through the weight ratio of grafted PDMA, monomer conversion, and the molecular weight of free and grafted PDMA at different reaction time. As a result, we have suggested that there were three types of grafted polymer chains on cellulose nanocrystals in this reaction system and discussed their evolution during the grafting reaction. Finally, we summarized several key factors for successful grafting in this macro-RAFT agent-assisted strategy.

Layer-By-Layer Self-Assembly of Polyelectrolytic Block Copolymer Worms on a Planar Substrate.

Cationic and anionic block copolymer worms are prepared by polymerization-induced self-assembly via reversible addition–fragmentation chain transfer (RAFT) aqueous dispersion copolymerization of 2-hydroxypropyl methacrylate and glycidyl methacrylate (GlyMA), using a binary mixture of a nonionic poly(ethylene oxide) macromolecular RAFT agent and either a cationic poly([2-(methacryloyloxy)ethyl]trimethylammonium chloride) or an anionic poly(potassium 3-sulfopropyl methacrylate) macromolecular RAFT agent. In each case, covalent stabilization of the worm cores was achieved via reaction of the epoxide groups on the GlyMA repeat units with 3-mercaptopropyltriethoxysilane. Aqueous electrophoresis studies indicated a pH-independent mean zeta potential of +40 mV and −39 mV for the cationic and anionic copolymer worms, respectively. These worms are expected to mimic the rigid rod behavior of water-soluble polyelectrolyte chains in the absence of added salt. The kinetics of adsorption of the cationic worms onto a planar anionic silicon wafer was examined at pH 5 and was found to be extremely fast at 1.0 w/w % copolymer concentration in the absence of added salt. Scanning electron microscopy (SEM) analysis indicated that a relatively constant worm surface coverage of 16% was achieved at 20 °C for adsorption times ranging from just 2 s up to 2 min. Furthermore, the successive layer-by-layer deposition of cationic and anionic copolymer worms onto planar surfaces was investigated using SEM, ellipsometry, and surface zeta potential measurements. These techniques confirmed that the deposition of oppositely charged worms resulted in a monotonic increase in the mean layer thickness, with a concomitant surface charge reversal occurring on addition of each new worm layer. Unexpectedly, two distinct linear regimes were observed when plotting the mean layer thickness against the total number of adsorbed worm layers, with a steeper gradient (corresponding to thicker layers) being observed after the deposition of six worm layers.

Investigation of the Adsorption of Amphipathic macroRAFT Agents onto Montmorillonite Clay.

Recently, there has been significant interest in the use of the reversible addition-fragmentation chain-transfer (RAFT) technique to generate a variety of organic/inorganic colloidal composite particles in aqueous dispersed media using the so-called macroRAFT-assisted encapsulating emulsion polymerization (REEP) strategy. In this process, special attention should be paid to the adsorption of the macromolecular RAFT (macroRAFT) agent onto the inorganic particles, as it determines the final particle morphology and can also influence latex stability. In this work, different amphipathic macroRAFT agents were synthesized by RAFT, and their adsorption onto commercial Montmorillonite clay Cloisite Na+ (MMT) was studied by means of adsorption isotherms. Three types of macroRAFT agents were considered: a nonionic one based on poly(ethylene glycol) methyl ether acrylate (PEGA) and n-butyl acrylate (BA), anionic ones, including a block copolymer and random copolymers, based on acrylic acid (AA), BA and PEGA, and cationic ones based on 2-(dimethylamino)ethyl methacrylate (DMAEMA), BA and PEGA. Six adsorption isotherm models (Langmuir, Freundlich, Tempkin, Redlich-Peterson, Sips, and Brunauer-Emmett-Teller) were adjusted to the experimental isotherms. The nonionic macroRAFT agent formed a monolayer on the clay surface with a maximum adsorption capacity of 400 mg g-1 at pH 8, as determined from the Sips adsorption model. Adsorption of the AA-based macroRAFT agents onto MMT was moderate at alkaline pH due to electrostatic repulsions, but increased with decreasing pH. The DMAEMA-based macroRAFT agents displayed a much stronger interaction with the oppositely charged MMT surface at acidic pH due to electrostatic interactions, and the concentration of adsorbed macroRAFT agent reached values as high as 800 mg g-1. The BET model fitted the experimental data relatively well indicating multilayer adsorption promoted by the presence of the hydrophobic BA units. In addition, the cationic macroRAFT agents afforded stable MMT/macroRAFT agent complexes as evaluated by dynamic light scattering and zeta potential analyses.

Surfactant-free poly(vinylidene chloride) latexes via one-pot RAFT-mediated aqueous polymerization

Water-soluble polymers obtained by reversible addition-fragmentation chain transfer (RAFT) polymerization were used for the production of surfactant-free poly(vinylidene chloride) (PVDC)-based latexes in a one-pot/two-step process that was exclusively conducted in water. In the first step, the hydrophilic macromolecular RAFT (macroRAFT) agent (i.e. poly(acrylic acid) (PAA), poly(methacrylic acid) (PMAA) or poly(sodium 4-styrenesulfonate) (PSSNa)) was synthesized in water using a trithiocarbonate RAFT agent, 4-cyano-4-thiothiopropylsulfanyl pentanoic acid (CTPPA). The macroRAFT agent was then directly utilized as reactive stabilizer for the aqueous emulsion copolymerization of vinylidene chloride (VDC) and methyl acrylate (MA) inspired by a polymerization-induced self-assembly (PISA) process. The developed recipes employed a very low amount of macroRAFT agent compared to the hydrophobic monomers (typically less than 2 wt%) and amphiphilic block copolymers of PAA-b-P(VDC-co-MA), PMAA-b-P(VDC-co-MA) or PSSNa-b-P(VDC-co-MA) were thus produced in situ, providing stabilization to the P(VDC-co-MA) particles. Stable, surfactant-free latexes were successfully obtained in each case with solids content up to 40 wt%. Surface tension measurements performed on the final dispersions showed that the amount of residual macroRAFT agent in water was negligible demonstrating that this strategy indeed gave rise to particles stabilized by covalently-anchored hydrophilic polymers. The PSSNa macroRAFT agents proved to be particularly interesting candidates achieving stable latexes of less than 100 nm leading to the formation of transparent films which did not whiten after being immersed in water.

Synthesis of Polymer/Silica Hybrid Latexes by Surfactant-Free RAFT-Mediated Emulsion Polymerization

The reversible addition–fragmentation chain transfer (RAFT) polymerization technique was used to synthesize random copolymers of poly(ethylene glycol) methyl ether acrylate) (PEGA) and n-butyl acrylate (BA) and terpolymers of acrylic acid (AA), PEGA and BA with a trithiocarbonate reactive end-group. These macromolecular RAFT agents (macro-RAFTs) were subsequently adsorbed at the surface of size-monodisperse colloidal silica particles with diameters varying between 40 and 450 nm. Adsorption isotherms for both macro-RAFTs could be well fitted to the Langmuir adsorption model, the AA-based macro-RAFT agent showing however a lower maximum adsorption. The adsorbed macro-RAFT agents were subsequently chain extended with a mixture of methyl methacrylate (MMA) and BA by starved feed emulsion polymerization. Cryo-TEM analysis of the resulting hybrid latexes synthesized in the presence of the P(AA-co-PEGA-co-BA) terpolymers resulted in multipod-like particles while the P(PEGA-co-BA) copolymers showed the formation ...

Xyloglucan-Functional Latex Particles via RAFT-Mediated Emulsion Polymerization for the Biomimetic Modification of Cellulose.

Herein, we report a novel class of latex particles composed of a hemicellulose, xyloglucan (XG), and poly(methyl methacrylate) (PMMA), specially designed to enable a biomimetic modification of cellulose. The formation of the latex particles was achieved utilizing reversible addition-fragmentation chain transfer (RAFT) mediated surfactant-free emulsion polymerization employing XG as a hydrophilic macromolecular RAFT agent (macroRAFT). In an initial step, XG was functionalized at the reducing chain end to bear a dithioester. This XG macroRAFT was subsequently utilized in water and chain extended with methyl methacrylate (MMA) as hydrophobic monomer, inspired by a polymerization-induced self-assembly (PISA) process. This yielded latex nanoparticles with a hydrophobic PMMA core stabilized by the hydrophilic XG chains at the corona. The molar mass of PMMA targeted was varied, resulting in a series of stable latex particles with hydrophobic PMMA content between 22 and 68 wt % of the total solids content (5-10%). The XG-PMMA nanoparticles were subsequently adsorbed to a neutral cellulose substrate (filter paper), and the modified surfaces were analyzed by FT-IR and SEM analyses. The adsorption of the latex particles was also investigated by quartz crystal microbalance with dissipation monitoring (QCM-D), where the nanoparticles were adsorbed to negatively charged model cellulose surfaces. The surfaces were analyzed by atomic force microscopy (AFM) and contact angle (CA) measurements. QCM-D experiments showed that more mass was adsorbed to the surfaces with increasing molar mass of the PMMA present. AFM of the surfaces after adsorption showed discrete particles, which were no longer present after annealing (160 °C, 1 h) and the roughness (Rq) of the surfaces had also decreased by at least half. Interestingly, after annealing, the surfaces did not all become more hydrophobic, as monitored by CA measurements, indicating that the surface roughness was an important factor to consider when evaluating the surface properties following particle adsorption. This novel class of latex nanoparticles provides an excellent platform for cellulose modification via physical adsorption. The utilization of XG as the anchoring molecule to cellulose provides a versatile methodology, as it does not rely on electrostatic interactions for the physical adsorption, enabling a wide range of cellulose substrates to be modified, including neutral sources such as cotton and bacterial nanocellulose, leading to new and advanced materials.

Ab Initio Emulsion and Miniemulsion Polymerization of Styrene Mediated by a Cyclohexenyl-Functionalized Amphiphilic RAFT Agent

We designed and used a cyclohexenyl-functionalized amphiphilic macromolecular reversible addition–fragmentation chain transfer (macro-RAFT) agent as surfactant and polymerization mediator for (mini)emulsion polymerization of styrene (St), aiming at synthesizing nanoparticles with vinyl-enriched surface and well-defined polymer chains. Unexpectedly, the pendent cyclohexenyl units in the macro-RAFT agent were found to undergo significant copolymerization with St exclusively during the nucleation period in the ab initio emulsion polymerization, leading to the consumption of cyclohexenyl groups, positive deviation of molecular weights, and broad molecular weight distributions. By contrast, in miniemulsion polymerization, the radical polymerization exhibited superb selectivity toward St monomers relative to the pendent cyclohexene vinyl units just as in the solution polymerization. The obtained polymer chains retained designed molecular weights, low polydispersity indexes, and quantitative cyclohexenyl functio...