Plant Machinery Research Articles

Automated Mulched Transplanting of Angelica Seedlings Using a Pneumatic Sowing Device

To address the challenges of labor-intensive, inefficient, and inconsistent manual hole sowing and transplanting of Angelica sinensis in rain-fed hilly regions of Northwest China, a pneumatic hole-sowing device was designed based on the principle of electromagnetically controlled, high-speed reciprocating cylinder motion. Considering the agronomic requirements for transplanting mulched Angelica sinensis, the device’s structure and operational parameters were optimized. The key mechanisms involved in hole sowing and seedling placement were analyzed. A pneumatic circuit system, controlled by a relay circuit, was established, and a hole-sowing mechanism with a delayed closure effect was designed. Using the Discrete Element Method (DEM) and Multi-Body Dynamics (MBD) coupling technology, a simulation of the hole-sowing process was conducted to evaluate the device’s performance and its impact on soil disturbance and hole reformation in the seedbed. Prototype device performance tests were conducted, using qualified seeding depth under mulch and hole spacing as indicators. When the theoretical hole spacing was 30 cm and the hole-sowing frequency was 60 plants/(min·row), the soil bin test results indicated a seeding depth qualification rate of 93%, a misalignment rate of 3%, and a spacing qualification rate of 83%; the field test results showed a qualified seeding depth rate under mulch of 96%, the hole misalignment rate was 5%, and the spacing qualified rate was 86%. The pneumatic hole-sowing device’s performance meets the agronomic requirements for vertical transplanting of Angelica sinensis seedlings. This research can serve as a reference for designing planting machinery for rhizomatous medicinal plants.

Development of Learning Modules for Electric Power Plant Machinery for Class XI Phase F of Electric Power Plant Engineering Expertise Program in Vocational Schools

Development of Learning Modules for Electric Power Plant Machinery for Class XI Phase F of Electric Power Plant Engineering Expertise Program in Vocational Schools

Effects of Rhizospheric Microbes, Growth Regulators, and Biochar in Modulating Antioxidant Machinery of Plants Under Stress

Effects of Rhizospheric Microbes, Growth Regulators, and Biochar in Modulating Antioxidant Machinery of Plants Under Stress

Pathway elucidation and heterologous reconstitution of the long-chain alkane pentadecane biosynthesis from Pogostemon cablin.

Very-long-chain (VLC) alkanes are major components of hydrophobic cuticular waxes that cover the aerial epidermis of land plants, serving as a waterproofing barrier to protect the plant against environmental stresses. The mechanism of VLC-alkane biosynthesis has been extensively elucidated in plants. However, little is known about the biosynthesis of long-chain alkanes (LC, C13 ~ C19) such as pentadecane in plants. Alkanes with different chain lengths are also major constituents of fossil fuels and thus the discovery of the alkane biosynthetic machinery in plants would provide a toolbox of enzymes for the production of renewable hydrocarbon sources and next generations of biofuels. The top leaves of Pogostemon cablin at young stage accumulate large amounts of LC-alkane pentadecane, making this plant an excellent system for the elucidation of LC-alkane biosynthetic machinery in plant. We show here that LC-alkane pentadecane biosynthesis in P. cablin involves an endoplasmic reticulum (ER)-localized complex made of PcCER1-LIKE3 and PcCER3, homologues of Arabidopsis ECERIFERUM1 (AtCER1) and AtCER3 proteins that are involved in Arabidopsis VLC-alkane biosynthesis. We reconstitute the biosynthesis of pentadecane in Nicotiana benthamiana by co-expression of PcCER1-LIKE3 and PcCER3 and further improve its production by silencing multifunctional acetyl-CoA carboxylases involved in fatty acid elongation pathway. Taken together, we uncovered the key biosynthetic machinery of LC-alkane pentadecane in P. cablin and demonstrated that using these newly identified enzymes to engineer this LC-alkane for liquid biofuel production in a heterologous plant host is possible.

Boosting banana resilience: Calcium supplementation enhances osmolyte and secondary metabolites production and strengthens the antioxidant machinery in drought and cold-exposed banana plants

Banana (Musa spp.) is a vital tropical fruit crop cultivated worldwide and is known for its nutritional value. The cultivation of bananas is often challenged by environmental stresses such as cold and drought, which can adversely affect plant productivity. In response to these challenges, plants deploy adaptive mechanisms to mitigate the impacts of environmental stresses. Calcium (Ca2+), recognized as a universal second messenger, is pivotal in cellular responses to hormones, pathogens, and stress factors. This study explores the potential of exogenous calcium supplementation as a cost-effective and promising solution, influencing metabolic activities and signal transductions in plants. To investigate the defensive role of Ca2+ supplementation in banana plants subjected to drought (200 mM Mannitol) and cold (14 °C) stress, comprehensive analyses were conducted to elucidate the mechanism underlying Ca2+-mediated stress tolerance. The plants were treated with mannitol, cold or Hoagland, and then supplemented with CaCl2 (15 mM). Exogenous Ca2+ treatment significantly increased the proline content and maintained water balance and cellular stability. Additionally, it enhanced the production of protective secondary metabolites and activated key antioxidant enzymes, countering oxidative stress. Molecular analysis revealed an upregulation of calcium-binding proteins involved in stress response, while Ca2+ treatment reduced lipid peroxidation, as indicated by lower malondialdehyde (MDA) levels, signifying improved membrane integrity and reduced oxidative damage. These findings underscore the protective impact of exogenously supplied calcium, offering insights for sustainable strategies to enhance banana resilience in the face of environmental challenges and climate change.

NO-CONTACT DIAGNOSTICS IN THE FUNCTION OF RISK-BASED MAINTENANCE ON A WIND GENERATOR MODEL

When it comes to risk-based maintenance of technical systems, selecting a diagnostic procedure is the weakest link in the chain of steps that guarantee the system's availability, sustainability, and safe operation while utilizing its working characteristics.The model of a wind generator, which by virtue of its technological structure represents an increasingly widespread system in the geographical and topographical sense, was used to examine diagnostics based on non-contact, remote collection of pertinent information, which is essential for assessing the state of the technical system. In addition, the fact that the system is not physically accessible to the maintenance teams emphasizes the necessity of taking prompt action to rectify work in order to preserve production capacity and the security of the exploitation process.When applied to the wind generator model, proactive maintenance based on risk allows for enhanced interconnected machine efficiency, optimal maintenance process planning, and real-time production process control. These factors contribute to the advancement and refinement of the contemporary 4K industry philosophy.The concept of remote diagnostics in complex technological structures is of interest to the authors. The goal is to process information about the condition through the lens of risk, paying particular attention to the diagnostic method's reliability and improving prediction accuracy in the maintenance of industrial plant machinery.

Thriving under Salinity: Growth, Ecophysiology and Proteomic Insights into the Tolerance Mechanisms of Obligate Halophyte Suaeda fruticosa.

Studies on obligate halophytes combining eco-physiological techniques and proteomic analysis are crucial for understanding salinity tolerance mechanisms but are limited. We thus examined growth, water relations, ion homeostasis, photosynthesis, oxidative stress mitigation and proteomic responses of an obligate halophyte Suaeda fruticosa to increasing salinity under semi-hydroponic culture. Most biomass parameters increased under moderate (300 mmol L-1 of NaCl) salinity, while high (900 mmol L-1 of NaCl) salinity caused some reduction in biomass parameters. Under moderate salinity, plants showed effective osmotic adjustment with concomitant accumulation of Na+ in both roots and leaves. Accumulation of Na+ did not accompany nutrient deficiency, damage to photosynthetic machinery and oxidative damage in plants treated with 300 mmol L-1 of NaCl. Under high salinity, plants showed further decline in sap osmotic potential with higher Na+ accumulation that did not coincide with a decline in relative water content, Fv/Fm, and oxidative damage markers (H2O2 and MDA). There were 22, 54 and 7 proteins in optimal salinity and 29, 46 and 8 proteins in high salinity treatment that were up-regulated, down-regulated or exhibited no change, respectively, as compared to control plants. These data indicate that biomass reduction in S. fruticosa at high salinity might result primarily from increased energetic cost rather than ionic toxicity.

Design and experiment of real-time reseeding system for transversal sugarcane planter with seeds pre-cutting

The issue of sugarcane seed leakage is one of the practical challenges encountered in the current utilization of sugarcane planting machinery, directly leading to reduced yields in sugarcane fields. This paper addresses the problem of seed leakage in the process of transverse planting of pre-cut sugarcane using theoretical analysis, modeling, simulation, and experimental research. It designs a real-time reseeding system for pre-cut sugarcane transverse planting machines, composed of seed boxes, backup seed rollers, reseeding rollers, and an electronic control system. The real-time reseeding system detects seed leakage on the planting machines seeding chain to control the reseeding mechanism, filling the gaps in the seeding chain with sugarcane seeds. During experimentation, the real-time reseeding system achieved a maximum reduction of seed leakage by 6% in the seeding chain, effectively addressing the issue of seed leakage in pre-cut sugarcane transverse planting machines.

Gossypium hirsutum calmodulin-like protein (CML 11) interaction with geminivirus encoded protein using bioinformatics and molecular techniques

Plant viruses are the most abundant destructive agents that exist in every ecosystem, causing severe diseases in multiple crops worldwide. Currently, a major gap is present in computational biology determining plant viruses interaction with its host. We lay out a strategy to extract virus-host protein interactions using various protein binding and interface methods for Geminiviridae, a second largest virus family. Using this approach, transcriptional activator protein (TrAP/C2) encoded by Cotton leaf curl Kokhran virus (CLCuKoV) and Cotton leaf curl Multan virus (CLCuMV) showed strong binding affinity with calmodulin-like (CML) protein of Gossypium hirsutum (Gh-CML11). Higher negative value for the change in Gibbs free energy between TrAP and Gh-CML11 indicated strong binding affinity. Consensus from gene ontology database and in-silico nuclear localization signal (NLS) tools identified subcellular localization of TrAP in the nucleus associated with Gh-CML11 for virus infection. Data based on interaction prediction and docking methods present evidences that full length and truncated C2 strongly binds with Gh-CML11. This computational data was further validated with molecular results collected from yeast two-hybrid, bimolecular fluorescence complementation system and pull down assay. In this work, we also show the outcomes of full length and truncated TrAP on plant machinery. This is a first extensive report to delineate a role of CML protein from cotton with begomoviruses encoded transcription activator protein.

Ecotoxicological assessment of cigarette butts on morphology and photosynthetic potential of Azolla pinnata

Cigarette butts (CBs) have become the most ubiquitous form of anthropogenic litter globally. CBs contain various hazardous chemicals that persist in the environment for longer period. These substances are susceptible to leaching into the environment through waterways. The recent study was aimed to evaluate the effects of disposed CBs on the growth and development of Azolla pinnata, an aquatic plant. It was found that after a span of 6 days, the root length, surface area, number of fronds, and photosynthetic efficacy of plant were considerably diminished on the exposure of CBs (concentrations 0 to 40). The exposure of CBs led to a decrease in the FM, FV/F0, and φP0, in contrast, the φD0 increased in response to CBs concentration. Moreover, ABS/CSm, TR0/CSm, and ET0/CSm displayed a negative correlation with CB-induced chemical stress. The performance indices were also decreased (p-value ≤ 0.05) at the highest concentration of CBs. LD50 and LD90 represent the lethal dose, obtained value for LD50 is 20.30 CBs and LD90 is 35.26 CBs through probit analysis. Our results demonstrate that the CBs cause irreversible damage of photosynthetic machinery in plants and also reflect the efficacy of chlorophyll a fluorescence analysis and JIP test for assessing the toxicity of CBs in plants.

Thermal adaptation in plants: understanding the dynamics of translation factors and condensates.

Plants, as sessile organisms, face the crucial challenge of adjusting growth and development with ever-changing environmental conditions. Protein synthesis is the fundamental process that enables growth of all organisms. Since elevated temperature presents a substantial threat to protein stability and function, immediate adjustments of protein synthesis rates are necessary to circumvent accumulation of proteotoxic stress and to ensure survival. This review provides an overview of the mechanisms that control translation under high-temperature stress by the modification of components of the translation machinery in plants, and compares them to yeast and metazoa. Recent research also suggests an important role for cytoplasmic biomolecular condensates, named stress granules, in these processes. Current understanding of the role of stress granules in translational regulation and of the molecular processes associated with translation that might occur within stress granules is also discussed.

Role of the dynamin-related protein 2 family and SH3P2 in clathrin-mediated endocytosis in Arabidopsis thaliana.

Clathrin-mediated endocytosis (CME) is vital for the regulation of plant growth and development through controlling plasma membrane protein composition and cargo uptake. CME relies on the precise recruitment of regulators for vesicle maturation and release. Homologues of components of mammalian vesicle scission are strong candidates to be part of the scission machinery in plants, but the precise roles of these proteins in this process are not fully understood. Here, we characterised the roles of the plant dynamin-related protein 2 (DRP2) family (hereafter DRP2s) and SH3-domain containing protein 2 (SH3P2), the plant homologue to recruiters of dynamins, such as endophilin and amphiphysin, in CME by combining high-resolution imaging of endocytic events in vivo and characterisation of the purified proteins in vitro. Although DRP2s and SH3P2 arrive similarly late during CME and physically interact, genetic analysis of the sh3p123 triple mutant and complementation assays with non-SH3P2-interacting DRP2 variants suggest that SH3P2 does not directly recruit DRP2s to the site of endocytosis. These observations imply that, despite the presence of many well-conserved endocytic components, plants have acquired a distinct mechanism for CME.

Comparative cost analysis of conventional and various Garlic planting machinery

Comparative cost analysis of conventional and various Garlic planting machinery

Coordination of aluminium crusher and battery energy storage system to provide multistage power system services

AbstractAncillary service provision and peak shaving (PS) play essential roles in the current day‐to‐day power system operation, which is challenged by the increasing renewable generation penetration. Providing these critical services using classical approaches such as peak load generators has been limited due to high operational costs and environmental impacts. The use of battery energy storage systems (BESS) is another popular method that is limited by high initial investment costs and high degradation rates. In this work, a novel approach to utilize industrial loads and BESS to provide multiple power system services in different stages is proposed. Industrial loads such as aluminium crushers are known for their intensive electricity consumption. Nevertheless, when applied in frequency regulation (FR), they perform poorly due to their discrete nature in operation. This drawback and the aforementioned BESS shortcomings are addressed by combining on‐site BESS with plant machinery to provide FR services and recover BESS related costs. Later, depending on the optimal capacity distribution, BESS usage is extended into the energy arbitrage market to provide PS services. This approach resulted in higher earnings for participating customers and network operators, as well as in less emissions, and minimal BESS degradations. An Australian case study of the South West Interconnected System, along with Worsley Alumina refinery data of Western Australia has been used to showcase the model performances.

Role of Plant-Growth-Promoting Rhizobacteria in Plant Machinery for Soil Heavy Metal Detoxification.

Heavy metals migrate easily and are difficult to degrade in the soil environment, which causes serious harm to the ecological environment and human health. Thus, soil heavy metal pollution has become one of the main environmental issues of global concern. Plant-growth-promoting rhizobacteria (PGPR) is a kind of microorganism that grows around the rhizosphere and can promote plant growth and increase crop yield. PGPR can change the bioavailability of heavy metals in the rhizosphere microenvironment, increase heavy metal uptake by phytoremediation plants, and enhance the phytoremediation efficiency of heavy-metal-contaminated soils. In recent years, the number of studies on the phytoremediation efficiency of heavy-metal-contaminated soil enhanced by PGPR has increased rapidly. This paper systematically reviews the mechanisms of PGPR that promote plant growth (including nitrogen fixation, phosphorus solubilization, potassium solubilization, iron solubilization, and plant hormone secretion) and the mechanisms of PGPR that enhance plant-heavy metal interactions (including chelation, the induction of systemic resistance, and the improvement of bioavailability). Future research on PGPR should address the challenges in heavy metal removal by PGPR-assisted phytoremediation.

Proteolytic control of the RNA silencing machinery.

Studies in plants were often pioneering in the field of RNA silencing and revealed a broad range of small RNA (sRNA) categories. When associated with ARGONAUTE (AGO) proteins, sRNAs play important functions in development, genome integrity, stress responses, and antiviral immunity. Today, most of the protein factors required for the biogenesis of sRNA classes, their amplification through the production of double-stranded RNA, and their function in transcriptional and post-transcriptional regulation have been identified. Nevertheless, and despite the importance of RNA silencing, we still know very little about their post-translational regulation. This is in stark contrast with studies in metazoans, where different modifications such as prolyl hydroxylation, phosphorylation, sumoylation, ubiquitylation, and others have been reported to alter the activity and stability of key factors, such as AGO proteins. Here, we review current knowledge of how key components of the RNA silencing machinery in plants are regulated during development and by microbial hijacking of endogenous proteases.

Endophytic fungi as a potential source of anti-cancer drug.

Endophytes are considered one of the major sources of bioactive compounds used in different aspects of health care including cancer treatment. When colonized, they either synthesize these bioactive compounds as a part of their secondary metabolite production or augment the host plant machinery in synthesising such bioactive compounds. Hence, the study of endophytes has drawn the attention of the scientific community in the last few decades. Among the endophytes, endophytic fungi constitute a major portion of endophytic microbiota. This review deals with a plethora of anti-cancer compounds derived from endophytic fungi, highlighting alkaloids, lignans, terpenes, polyketides, polyphenols, quinones, xanthenes, tetralones, peptides, and spirobisnaphthalenes. Further, this review emphasizes modern methodologies, particularly omics-based techniques, asymmetric dihydroxylation, and biotic elicitors, showcasing the dynamic and evolving landscape of research in this field and describing the potential of endophytic fungi as a source of anticancer drugs in the future.

Research on unsupervised condition monitoring method of pump-type machinery in nuclear power plant

As a typical active equipment, pump machinery is widely used in nuclear power plants. Although the mechanism of pump machinery in nuclear power plants is similar to that of conventional pumps, the safety and reliability requirements of nuclear pumps are higher in complex operating environments. Once there is significant performance degradation or failure, it may cause huge security risks and economic losses. There are many pumps mechanical parameters, and it is very important to explore the correlation between multi-dimensional variables and condition. Therefore, a condition monitoring model based on Deep Denoising Autoencoder (DDAE) is constructed in this paper. This model not only ensures low false positive rate, but also realizes early abnormal monitoring and location. In order to alleviate the influence of parameter time-varying effect on the model in long-term monitoring, this paper combined equidistant sampling strategy and DDAE model to enhance the monitoring efficiency. By using the simulation data of reactor coolant pump and the actual centrifugal pump data, the monitoring and positioning capabilities of the proposed scheme under normal and abnormal conditions were verified. This paper has important reference significance for improving the intelligent operation and maintenance efficiency of nuclear power plants.

Spatiotemporal oxygen dynamics in young leaves reveal cyclic hypoxia in plants

Oxygen is essential for plant growth and development. Hypoxia occurs in plants due to limited oxygen availability following adverse environmental conditions as well in hypoxic niches in otherwise normoxic environments. However, the existence and functional integration of spatiotemporal oxygen dynamics with plant development remains unknown. In animal systems dynamic fluctuations in oxygen availability are known as cyclic hypoxia. In this study, we demonstrate that cyclic fluctuations in internal oxygen levels occur in young emerging leaves of Arabidopsis plants. Cyclic hypoxia in plants is based on a mechanism requiring the ETHYLENE RESPONSE FACTORS type VII (ERFVII) that are central components of the oxygen-sensing machinery in plants. The ERFVII-dependent mechanism allows precise adjustment of leaf growth in response to carbon status and oxygen availability within plant cells. This study thus establishes a functional connection between internal spatiotemporal oxygen dynamics and developmental processes of plants.

Evaluation of Agricultural Machinery Presence and Usage Activities in Tokat

In this study, the area of influence of agricultural machinery in Tokat, its districts and the size of the cultivated area were compared. Required number of machineries was evaluated. Thus, the machines were divided into seven groups (Soil Tillage Machinery, Sowing and Planting Machinery, Maintenance and Fertilization Machinery, Plant Protection Machinery, Harvesting Machinery, Combine Harvester, Tractors). Data on the number of cultivated areas and agricultural machinery were taken from the Turkish Statistical Institute. The number of machines, daily working time, annual workable days, effective working capacity, and machine impact area for each machine were calculated separately. Based on this data, the number of machines that should be in each district was determined. As a result, it was determined that the number of Subsoiler, Combi Harrow, Stone Collecting Machinery, Rotary Cultivator, Soil levelling Machinery, Rotary Tiller, Seedling Planting Machinery, Arc Opening Plough, Manure Spreading Machinery, Baler, and Combine Harvester is insufficient in the province of Tokat. It was determined that other machines in the groups were more than necessary. Baler had the highest deficit, while tractor had the highest surplus. The importance of planning in enterprises and the machines that should be prioritized in the production of industrialists have been revealed.