Luminescent Complexes Research Articles

Exploring the role of neutral ligands in modulating the photoluminescence of samarium complexes with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione.

Four eight-coordinated luminescent samarium complexes of type [Sm(hfpd)3L2] and [Sm(hfpd)3L'] [where hfpd = 1,1,1,5,5,5-Hexafluoro-2,4-pentanedione L = tri-octyl-phosphine oxide (TOPO) and L' = 1,10-phenanthroline (phen), neocuproine (neoc) and bathocuproine (bathoc) were synthesized via a stoichiometrically controlled approach. This allows for precise control over the stoichiometry of the complexes, leading to reproducible properties. This investigation focuses on understanding the impact of secondary ligands on the luminescent properties of these complexes. Infrared (IR) spectra provided information about the molecular structures, whereas 1H and 13C nuclear magnetic resonance (NMR) spectra confirmed these structural details along with the coordination of ligands to trivalent Sm ion. The UV-vis spectra revealed the molar absorption coefficient and absorption bands associated with the hfpd ligand and photoluminescence (PL) spectroscopy demonstrated intense orange-red emission (648 nm relative to 4G5/2 → 6H9/2) from the complexes. The Commission Internationale de l'Éclairage (CIE) triangles indicated that the complexes emitted warm orange red light with color coordinates (x, y) ranging from (0.62, 0.36) to (0.40, 0.27). The investigation of the band gap as well as color parameters confirms the utility of these complexes in displays and LEDs.

Advancing photopolymerization and 3D printing: High-Performance NiII complexes bearing N2O2 Schiff-base ligands as photocatalysts

New high-performance photocatalysts based on metal structures are being developed for polymerization. However, using low-cost metals while ensuring effectiveness is challenging. In this study, two NiII complexes NiL1 and NiL2 were synthesized using N2O2 Schiff-base ligands bearing π-extended rings (naphthaldehyde (H2L1) and phenylsalicylaldehyde (H2L2) groups), respectively. These complexes were characterized by FTIR, UV–Vis and 1H NMR spectroscopy, elemental analysis, cyclic voltammetry, and MALDI-TOF mass spectrometry. NiL1 and NiL2 were evaluated in photoinitiating system as new photocatalysts for the Free Radical Photopolymerization of Ethoxylated (3) Trimethylolpropane Triacrylate (TMPETA) for violet and green light. Three-component systems were employed in the presence of Di-tert-butyl-diphenyl iodonium hexafluorophosphate (Iod) and ethyl dimethylaminobenzoate (EDB). The absorption, luminescence, and redox properties of nickel complexes and ligands were explored and compared for a better understanding of their structure/reactivity relationship. The designed nickel complexes showed good photoinitiation abilities. NiL2 exhibited the highest monomer conversion, and it was investigated in the on–off process under green light irradiation, demonstrating the efficiency of the system in reactivating the polymerization process. An oxidative pathway mechanism was proposed based on free energy, steady state photolysis and electron spin resonance spin trapping experiments. The best system was successfully applied in cationic photopolymerization and 3D printing.

Luminescence of Gadolinium Liquid Crystal Complex in a Composite with Paramagnetic Quantum Dots

Luminescence of Gadolinium Liquid Crystal Complex in a Composite with Paramagnetic Quantum Dots

Luminescent Tetranuclear Copper(I) and Gold(I) Heterobimetallic Complexes: A Phosphine Acetylide Amidinate Orthogonal Ligand Framework for Selective Complexation.

The synthesis of phosphine acetylide amidinate stabilized copper(I) and gold(I) heterobimetallic complexes was achieved by reacting ligand [{Ph2PC≡CC(NDipp)2}Li(thf)3] (Dipp=2,6-N,N'-diisopropylphenyl) with CuCl and Au(tht))Cl, yielding the eight membered ring [{Ph2PC≡CC(NDipp)2}2Cu2] and the twelve membered ring [{Ph2PC≡CC(NDipp)2}2Au2]. {Ph2PC≡CC(NDipp)2}2Cu2] features a Cu2 unit, which is bridged by two amidinate ligands, served as a metalloligand to synthesize the heterobimetallic CuI/AuI complexes [{(AuX)Ph2PC≡CC(NDipp)2}2Cu2] (X=Cl, C6F5). In these reactions, the central ring structure is retained. In contrast, when the twelve membered ring [{Ph2PC≡CC(NDipp)2}2Au2] was reacted with CuX (X=Cl, Br, I and Mes), the reaction led to the rearrangement of the central ring structure to give [{(AuX)Ph2PC≡CC(NDipp)2}2Cu2] (X=Cl, Br, I and Mes), which feature the same the eight membered Cu2 ring as above. These compounds were also synthesized by a one-pot reaction. The luminescent heterobimetallic complexes were further investigated for their photophysical properties.

Tuning up of chromism, luminescence in cadmium-viologen complexes through polymorphism strategy: Inkless erasable printing application

In our work, polymorphism strategy has been successfully applied to tune up chromism and luminescence properties of viologen-based materials. Two polymorphs of viologen-based complexes of α-CdBr2(PHSQ)2(H2O)2 (1) and β-CdBr2(PHSQ)2(H2O)2 (2) (PHSQ = N-(4-sulfophenyl)-4,4′-bipyridinium) were synthesized by changing the solvent. They can both respond to UV light and electricity in the manner of chromism visible to the naked eye and the coloration states have good reversibility, through which an inkless erasable printing model has been established. But the coloration contrast of 1 is higher compared to 2. Meanwhile, they both exhibit photoluminescence properties and the intensity of 1 is twice that of 2, which is accompanied by photoquenching upon continuous UV light irradiation. The only divergence of disordered/ordered O atoms in the two crystalline compounds leads to significantly different chromic and luminescent properties. Further explorations simultaneously demonstrate that the different chromic performance between 1 and 2 should attribute to the alteration of stimulus-induced (light/ electricity) electron transfer channels caused by the ordered/disordered O atoms in the complexes, which is achieved through CH···O and OH···O interactions to change crystal arrangement and structural rigidity, thus affect luminescent properties.

Phosphine Oxide-Nd3+ Coordination Chains with Cumulated Output Enable Efficient LED-Pumping Optical Amplification.

Near-infrared luminescent rare-earth organic complexes have attracted intensive attention in the field of optical waveguide amplification. However, their optical gains were commonly less than 4 dB/cm due to limited doping concentrations. Herein, two one-dimensional (1D) Nd3+ coordination chains, namely, [Nd(TTA)3(DBTDPO)]n (Nd1) and [Nd(TTA)3(DPEPO)]n (Nd2), bridged by phosphine oxide ligands were developed for the neodymium-doped waveguide amplifier. Despite its P-P distance being similar to DBTDPO, the different P═O orientation of DPEPO renders markedly shorter intra- and interchain Nd-Nd distances for Nd2 in comparison to Nd1. Furthermore, the weaker intermolecular interactions alleviate the quenching effect for Nd2. Therefore, Nd2 can provide more locally concentrated and radiative Nd3+ ions, leading to a larger Nd3+-characteristic 1.06 μm emission intensity and duration than Nd1. Based on embedded and evanescent-field waveguide structures, Nd2 achieves state-of-the-art gain maxima of 5.7 and 4.9 dB/cm as well as outstanding gain stability. These results indicate that controllable coordination assembly of lanthanide ions in multidimension provides a flexible approach to combine local high-density outputs and effective suppression of quenching.

Demonstration of Optical Gain at 1535 nm Based on ErIII Complex‐Doped Polymer Waveguides Under Light‐Emitting Diode Excitation

AbstractA near‐infrared luminescent complex Er(DBTTA)3(DBFDPO) [where DBTTA = dibenzotetrathienoacene; DBFDPO = 4,6‐bis (diphenylphosphoryl) dibenzofuran] is synthesized. Based on the intramolecular energy transfer between organic ligands and Er3+ ions, optical gains at 1535 nm are demonstrated in Er(DBTTA)3(DBFDPO)‐doped polymer waveguides under the excitation of light‐emitting diodes (LEDs) instead of laser pumping. Relative gains of 6.4, 8.2, and 10.6 dB are obtained in 1 cm long waveguides with cross‐sectional dimensions of 6 × 4, 4 × 4, and 2 × 3 µm2 respectively, using the vertical top‐pumping mode of a 365 nm LED with 462 mW. Incorporating an ≈100 nm thick aluminum reflector grown under the lower cladding, enhanced the optical gain to 11.6 dB cm−1 in a waveguide with a cross‐section of 4 × 4 µm2, and an internal gain of ≈7.4 dB cm−1 is achieved. By relying on the intramolecular energy transfer and LED top‐pumping technology, the upconversion luminescence of Er3+ ions and thermal damage to polymer waveguides caused by the high power density of laser pumping can be effectively reduced. The complex Er(DBTTA)3(DBFDPO)‐doped polymer can be spin‐coated on different types of waveguides to compensate for optical losses at 1.5 µm and is expected to have a critical role in planar photonic integration.

Methoxylated bis(pentafluorophenyl)boron‐β‐diketonates: Synthesis, Optical Properties and Hydrolytic Stability

AbstractA series of methoxylated bis(pentafluorophenyl)boron‐β‐diketonates (dkB(C6F5)2) with intense emission has been synthesized and characterized by a variety of physicochemical methods. The photophysical properties of the synthesized compounds were thoroughly investigated by electronic absorption, steady‐state, and time‐resolved fluorescence spectroscopy in both solution and solid state. The studied compounds exhibit solvatochromic behavior attributed to the intramolecular charge transfer (ICT) nature of the first excited state. The formation of exciplexes between DBMB(C6F5)2 and benzene derivatives was also studied. Notably, the studied compounds display a complex luminescence profile in the solid state, featuring fluorescence, delayed fluorescence and phosphorescence emission. Furthermore, the hydrolytical stability of the complexes was assessed, demonstrating excellent resistance to hydrolysis. Estimated rate constants, determined at 60 °C, are significantly lower (90‐2000 times) than those observed for the well‐studied dibenzoylmethanatoboron difluoride (DBMBF2). The incorporation of pentafluorophenyl substituents at the boron atom enables the synthesis of highly fluorescent and hydrolytically stable boron chelate complexes, suitable for sensing and bioimaging applications in water‐containing environments.

Monometallic heteroleptic complexes of Dy(III) ion incorporating β-diketone and ancillary moieties: Photophysical and electrochemical analyses

Several luminescent ternary dysprosium complexes were synthesized and examined using diketone ligand 1,3-diphenylprop-1,3-dione (DPD) and various auxiliary ligands. Spectroscopic analysis was carried out to determine the structural and photophysical features of Dy (III) complexes. IR and proton NMR spectroscopic studies suggested the bonding of chelating moieties to the metal ion through oxygen and nitrogen atom. The optical and electronic band gap is evaluated which proposed the conducting behaviour of dysprosium complexes. Upon excitation with UV radiation, three distinct emission peaks of the Dy (III) ion are appeared at about 485 nm (J = 15/2), 575 nm (13/2) and 664 nm (11/2) corresponding to the transitions of type 4F9/2 → 6HJ. The strongest emission peak obtained at ∼ 575 nm is responsible for yellow emission of Dy (III) complexes. The yellow to blue (Y/B) ratio estimated for the transition J = 13/2 / J = 15/2 were found to be in the range of 4.19 – 2.80. The quantum yield was also determined for the Dy (III) complexes which is as: Φ1 = 0.315, Φ2 = 0.261, Φ3 = 0.183, Φ4 = 0.157. The synthesized dysprosium complexes demonstrate luminescence lifetime in decreasing order i.e. 0.600 ms > 0.510 ms > 0.431 ms > 0.323 ms. Furthermore, the chromaticity coordinates also confirm their yellow luminous behavior. These newly synthesized complexes could be utilized for developing systems significant for lighting, OLEDs and displays due to their luminous features.

Circularly polarised luminescence of cholesteric polymer composite with high concentration of europium complex

ABSTRACT A novel method has been developed for fabricating cholesteric liquid crystal polymer composite containing a luminescent europium complex. It involves creating porous cholesteric polymer networks, introducing the europium complex into the pores and encapsulating it through the UV-induced polymerisation of a nematic diacrylate. The resulting composite exhibits bright red luminescence upon excitation by UV light which is strongly circularly polarised. Such materials have potential applications in display technologies, counterfeit protection and other fields.

Lanthanide-Sensitized Upconversion Iridium Complex via Triplet Energy Transfer.

Cyclometalated iridium (Ir) complexes demonstrate impressive capabilities across a range of fields, including biology and photocatalysis, due to their tunable optical characteristics and structure flexibility. However, generating upconversion luminescence of Ir complexes under near-infrared light excitation is challenging. Herein, by employing lanthanide-doped upconversion nanoparticles (UCNPs) as the sensitizer, a new strategy is demonstrated to gain upconversion luminescence of Ir complexes via triplet energy transfer. This design relies on a rationally designed hybrid of core-shell structured NaYbF4:Tb@NaTbF4 UCNPs and new Ir phosphonate complexes, in which UCNPs can migrate upconverted energy to the surface of nanoparticles through Tb3+-mediated energy migration and then sensitize the upconversion luminescence of Ir complexes upon 980nm excitation. Both experimental and theoretical investigations highlight the significance of triplet energy transfer from excited Tb3+ ions to the triplet state of Ir complexes in the sensitization of upconversion luminescence of Ir complexes. These findings may open exciting avenues for fabricating hybrid Ir materials with new functions and driving the development of UCNP-based nanomaterials.

Efficient Blue Photo- and Electroluminescence from CF3-Decorated Cu(I) Complexes.

Luminescent organometallic complexes of earth-abundant copper(I) have long been studied in organic light-emitting diodes (OLED). Particularly, Cu(I)-based carbene-metal-amide (CMA) complexes have recently emerged as promising organometallic emitters. However, blue-emitting Cu(I) CMA complexes have been rarely reported. Here we constructed two blue-emitting Cu(I) CMA emitters, MAC*-Cu-CF3Cz and MAC*-Cu-2CF3Cz, by introducing one or two CF3 substitutes into carbazole ligands. Both complexes exhibited high thermal stability and blue emission colors. Moreover, two complexes exhibited different emission origins rooting from different donor ligands: a distinct thermally activated delayed fluorescence (TADF) from ligand-to-ligand charge transfer excited states for MAC*-Cu-CF3Cz or a dominant phosphorescence nature from local triplet excited state of the carbazole ligand for MAC*-Cu-2CF3Cz. Inspiringly, MAC*-Cu-CF3Cz had high photoluminescence quantum yields of up to 94 % and short emission lifetimes of down to 1.2 μs in doped films, accompanied by relatively high radiative rates in the 105 s-1 order. The resultant vacuum-deposited OLEDs based on MAC*-Cu-CF3Cz delivered pure-blue electroluminescence at 462 nm together with a high external quantum efficiency of 13.0 %.

Synthesis and luminescent properties of cellulose acetate butyrate films doped with europium complex Eu(TTA)3 for optical thermometry

In this work, the luminescent β-diketonate europium complex, Eu(TTA)3, was incorporated into the polymer cellulose acetate butyrate in different concentrations in the form of composite films. The photoluminescence analysis showed that the composites improved the internal transition of the europium ion, 5D0 → 7F2, mainly responsible for the emission of red light from the complex, by providing a highly asymmetric chemical environment around the europium ion and by reducing non-radiative decays. The composite matrix also contributed to the quantum efficiency of the luminescence, reaching 38 %, by reducing the excited state deactivation rates. The luminescence lifetime of the composite linearly decayed with increasing temperature, while the luminescence intensity displayed an exponential decrease by increasing temperature, both behaviors proved to be appropriate for use in optical thermometry. The analysis of Raman spectra, Judd-Ofelt parameters, decay rates, and lifetime showed that the characteristics of the isolated complex were mostly maintained after being added to the polymeric matrix.

Coordinated Solvent Molecules Enable the Excellent Capabilities of Two Zn2+‐Based Complexes in Detecting l‐Arginine via Long‐Lived Luminescence Recovery

AbstractLuminescence metal–organic materials (MOMs) are widely used as probes for detection. However, most of such probes are based on fluorescence and work in either turn‐off or turn‐on mode. In contrast, long‐lived (>10 ms) probes (LLPs) with recovery response to analyte are quite rare. Herein “solvation complex” strategy is used to prepare two new afterglow complexes with multiple coordinated solvents, trans‐complex 1 with both delayed fluorescence (DF) and room temperature phosphorescence (RTP), and cis‐complex 2 with RTP. Remarkably, they can serve as selective and recovery LLPs for l‐Arginine detection, with limit of detection down to 1.0 × 10−7 M. In addition, heating/fumigation can induce reversible arousal/silence of their afterglow, while H2O/DMSO vapor fumigation causes reversible crystalline‐to‐crystalline transformation between them. Detailed mechanism studies reveal that the change in coordinated solvent, including loss/acquisition, exchange, or replacement, plays a key role in such afterglow multi‐stimuli‐responsive properties. This work not only shows the potential of such long‐lived luminescence complex for recovery detection, but also reveals the unique advantages of solvation complex in the preparation of afterglow multi‐stimuli‐responsive materials

Terbium Phenanthroline Complex as a Luminescent Probe for the Detection of Anthrax Biomarker: Dipicolinic acid.

Dipicolinic acid (DPA) is a prominent biomarker for Anthrax disease. Bacillus anthracis bacterial endospores is composed of DPA as the significant component, which on over inhalation can cause severe health issues. Such contagious and life-threatening pathogens can be employed as bioweapons or biothreat agents for spreading bioterrorism which is a major risk for national security and public health concerns. Hence, effective detection or a surveillance system is essential for preventing the growth of bioterrorism events. Herein, we have developed a Terbium - 1,10 Phenanthroline (Tb-Phen) based lanthanide luminescence complex with bright green fluorescence. On addition of DPA, the green fluorescence is turn-off at a linear range from 0.6 to 4.762 mM. In this effect, 5D4- 7F5 transition caused by 1,10-phenanthroline to Tb3+ at 544nm is restricted due to energy transfer quenching and Inner Filter Effect (IFE). The developed probe shows good sensitivity towards the detection of DPA with other coexisting biomolecules and ions with a low Limit of Detection (LOD) of 5.029 µM. The practical feasibility was evaluated in paper strip assay and extended in real samples such as human serum and tap water with satisfactory recovery percentage. Thereby, probe finds promising application in sensing of anthrax spore biomarker (DPA) and biothreat agents.

Pt-S Bond-Enabled Temperature-Dependent Phosphorescence in S-Heteroaryl Tetradentate Pt(S^C^N^O) Complexes.

This study presents the rare examples of S-heteroaryl tetradentate Pt(S^C^N^O) luminescent complexes (PtSZ and PtSZtBu) containing a Pt-S bond. The presence of the Pt-S bond allows the novel Pt(S^C^N^O) complexes to exhibit temperature-dependent phosphorescent emission behavior. The PtSZtBu exhibits dual-emission phenomena and biexponential transient decay spectra above 250 K, indicating the presence of two minimal excited states in the potential energy surface (PES) of the T1 state. Through complementary experimental and computational studies, we have identified changes in orbital composition between Pt(dxy)-S(px) and Pt(dyz)-S(pz) in excited states with increasing temperature. This results in two energy minima, enabling the excited states to decay selectively and radiatively at different temperatures. Consequently, this leads to remarkable steady-state and transient emission spectra changes. Our work not only provides valuable insights for the development of novel Pt-S bond-based tetradentate Pt(II) complexes but also enhances our understanding of the distinctive properties governed by the Pt-S bond.

Luminescence of Lanthanide Complexes in Mesoporous Silica Matrices: A Textbook Example of Tris‐Dipicolinate Europium Complex Adsorbed in SBA‐15

AbstractThe incorporation of luminescent lanthanide complexes in inorganic matrices opens appealing possibilities in the rational upstream conception of new luminescent materials with easier recyclability. In this regard, the influence of SBA‐15 mesoporous silica, as a host matrix, on the photophysical properties of europium‐trisdipicolinate cesium salt is investigated. The lanthanide complex can be completely and reversibly adsorbed on the silica, using incipient wetness impregnation (IWI) in WATER, without the need of anchoring groups or covalent bonding on the silica surface. This specific procedure allows the homogeneous dispersion of the lanthanide complex into the host silica matrix. Appropriately assessing the photophysical properties of the targeted luminescent material proved remarkably challenging, demanding utmost caution, particularly due to the strong scattering of the mesoporous matrices. Additionally, while the observations confirm an important increase of luminescence lifetimes of lanthanide complexes upon integration into these mediums, this variation is attributed to the differing refractive indexes and not to specific surface interactions or confinement effect. Indeed, it appeared that previous literature precedents depicted erroneous exhalations of the complexes intrinsic quantum yield due to the repeated use of erroneous refractive index values. In the meantime, the luminance of these materials under UV irradiation improves drastically in comparison to what is obtained with the physical dispersion of micro‐crystals of the lanthanide complex onto silica. It is demonstrated that this improvement is due to a reduced inner filter effect in the adsorbed samples. In this regard, IWI of lanthanide complexes in the mesoporous matrices method could be of interest in the development of recyclable emitting layers, less demanding in terms of emitter quantity.

9-Borafluoren-9-yl and diphenylboron tetracoordinate complexes of 8-quinolinolato ligands with heavy-atoms substituents: Synthesis, fluorescence and application in OLED devices

This work describes the synthesis and characterisation of new tetrahedral boron complexes, incorporating bromine- or iodine-substituted 8-quinolinolato chelate chromophores connected to 9-borafluoren-9-yl or diphenylboron orthogonal fragments. The molecular features and photophysical properties of these complexes are analysed in both solution and solid state. Steady-state photophysical studies reveal photoluminescence quantum yields (Φf) ranging from 0.02 to 0.15 and prompt fluorescence (PF) lifetimes (τf) between 2 and 16 ns. Time-resolved photophysical experiments show the presence of delayed fluorescence (DF) and phosphorescence at both 77 K and room temperature. The DF intensity increases with a rise in temperature. This variation is ascribed to an enhancement in the intersystem crossing (ISC) process promoted by the bromine or iodine heavy-atom effect. Investigations into the dependence of DF intensity relative to the excitation dose indicate emissions stemming either from Triplet-Triplet Annihilation (TTA), Thermally Activated Delayed Fluorescence (TADF), or a combination of these competing mechanisms. The effect is related to the size and number of heavy-atom substituents in each boron complex. A study of the DF emission intensity as a function of the excitation dose reveals that diiodo-substituted 8-quinolinolato boron complexes, whether rigid or flexible, display TADF emission. Rigid 5,7-dibromo- and 5-chloro-7-iodo-substituted 8-quinolinolato complexes exhibit a combined TADF-TTA mechanism, whereas the other complexes predominantly demonstrate pure TTA emission. DFT and TDDFT calculations showed that the ground state structures reproduced the experimental geometries and only small increases in bond lengths were observed in the excited state geometries. The low energy absorption bands displayed mainly intra-ligand π→π* (8-quinolinato) character. The fluorescence emission energies were well reproduced, while the singlet-triplet energy gaps were relatively high and spin-orbit coupling was relevant for complexes with heavy-atoms. Ultimately, organic light-emitting diodes (OLEDs) are fabricated using the most luminescent boron complexes. The best OLED is obtained when using complex 3a, which displays green electroluminescence (EL) (λEL = 502 nm) with maximum external quantum efficiency (EQEmax) of 2.5% and maximum luminance (Lmax) of 2200 cd m−2.

Two robust zinc(II) complexes as multi-functional luminescence sensor for detection of Fe3+, Cr2O72−, and CrO42− ions in water

Two new zinc(II) complexes, namely, [Zn(BBOP)(TPA)0.5]n (1) and [Zn(BBOP)(NDC)·H2O]n (2) (H2TPA = terephthalic acid, H2NDC = 1,4-naphthalene dicarboxylic acid, BBOP = 1,3-bis(benzimidazol-2-yl)-2-oxapropane) are hydrothermally synthesized and characterized. 1 features a 3D 2-fold interpenetrated 3-connected SrSi2-type framework. 2 is a mononuclear Zn(II) complex and further extend into the 3D supramolecular framework by OH⋯O and NH⋯O hydrogen bonding interactions. 1 and 2 both manifest high chemical stability. Two luminescence complexes are excellent sensors for the luminescent detection of Fe3+, Cr2O72−, and CrO42− ions in an aqueous medium. The quenching mechanism of the complexes is also investigated.

Multi-responsive luminescent complex for Fe3+, Cr2O72− and CrO42− species in aqueous solution based on aromatic polycarboxylic acid and imidazole-containing ligand: synthesis, crystal structure and selective detection

One Cadmium(II)-based complex, [Cd(LBIX)(HEA)]n (1), was synthesized using 4,4′-bis((1H-imidazol-1-yl)methyl)-1,1′-biphenyl (LBIX) and 1,2-phenylenediacetic acid (H2HEA) as ligands. The analysis of the single crystal structure reveals that 1 possesses a ladder-like chain structure, which extends into a 3D architecture through π···π interactions. 1 was identified through powder X-ray diffraction analysis (PXRD), elemental analysis (EA), infrared spectroscopy (IR) and thermogravimetric analysis (TGA). It can be seen from the luminescence experiment that 1 has high Ksv value (Cr2O72−: 1.51 × 104 M−1, CrO42−: 1.16 × 104 M−1 and Fe3+: 1.26 × 104 M−1) and lower detection limit (Cr2O72−: 1.14 μM, CrO42−: 1.88 μM and Fe3+: 1.14 μM), it is utilized as a multi-response sensor to recognition Fe3+, CrO42− and Cr2O72− in an aqueous solution. Mechanisms in which fluorescence quenching occurs have been examined using techniques such as PXRD, UV–vis absorption spectra, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Due to its excellent selectivity, high sensitivity and strong stability, it is suitable for detecting Fe3+, CrO42− and Cr2O72− ions as a fluorescent probe.