Luminescent Biosensor Research Articles

A bioluminescent test system reveals valuable antioxidant properties of lactobacillus strains from human microbiota.

Oxidative stress cause serious damages in human organism resulting in multiple diseases. Antioxidant therapy includes diet, the use of chemical agents or commensal bacteria such as lactobacilli. This study aims to evaluate the antioxidant (AO) activity of cell-free culture supernatants of lactobacilli, isolated from different parts of the human body. A test system based on Escherichia coli MG1655 strains carrying plasmids encoding luminescent biosensors pSoxS-lux and pKatG-lux inducible by superoxide anion and hydrogen peroxide, respectively, was used to analyze cell-free culture supernatants of lactobacilli. Bioluminescent detection systems are suitable for quick screening of AO activity of lactobacilli. The majority of strains (51 out of 81) belonging to six different species demonstrated various levels of antioxidant activity. This activity was confirmed using the trolox equivalent method. The genome of one of the strains showing high AO activity was sequenced, and the genes putatively involved in AO capacity were determined. Potencies of standard AO and CFS from the most active Lactobacillus strains. Percentages of decrease in the detected luminescence (IAO%) in the presence of AO or CFS are presented. L. br.-L. brevis, L. pl. -L. plantarum, L. rh.-L. rhamnosus.

Smelling Pseudomonas aeruginosa infections using a whole-cell biosensor – An alternative for the gold-standard culturing assay

Improved easy-to-use diagnostic tools for infections are in strong demand worldwide. Yet, despite dramatic advances in diagnostic technologies, the gold-standard remains culturing. Here we offer an alternative tool demonstrating that a bacterial biosensor can efficiently detect Pseudomonas aeruginosa infections in patients suffering from otitis externa. Detection was based on specific binding between the biosensor and 2-aminoacetophenone (2-AA), a volatile produced by P. aeruginosa in high amounts. We collected pus samples from ears of 26 subjects exhibiting symptoms of otitis externa. Detection of P. aeruginosa using the biosensor was compared to detection using gold-standard culturing assay and to gas-chromatograph–mass-spectrometry (GC–MS) analyses of 2-AA. The biosensor strain test matched the culture assay in 24 samples (92%) and the GC–MS analyses in 25 samples (96%). With this result in hand, we designed a device containing a whole-cell luminescent biosensor combined with a photo-multiplier tube. This device allowed detection of 2-AA at levels as low as 2 nmol, on par with detection level of GC–MS. The results of the described study demonstrate that the volatile 2-AA serves as an effective biomarker for P. aeruginosa in ear infections, and that activation of the biosensor strain by 2-AA provides a unique opportunity to design an easy-to-use device that can specifically detect P. aeruginosa infections.

Biosensor for screening bacterial mercury methylation: example within the Desulfobulbaceae

Mercury methylation and demethylation processes govern the fate of methylmercury in aquatic ecosystems. Under anoxic conditions, methylation activity is mainly of biological origin and is often the result of sulfate-reducing bacteria. In this study, the use of a luminescent biosensor for screening methylmercury production was validated by exposing the reporter strain to methylating or non-methylating Desulfovibrio strains. The sensitivity of the biosensor to methylmercury was shown to depend on sulfate-reducing bacterial growth conditions. Bioluminescence was measured using 1–10 mM of sulfides. As the sulfide level increased, luminescence decreased by 40–70%, respectively. Nevertheless, assuming an average of 5 mM of sulfide produced during sulfate-reducing growth, a mercury methylation potential of over 4% was detected when using 185 nM of inorganic mercury. Due to technical limitations, mercury speciation has, to date, only been investigated in a small number of bacterial strains, and no consistent phylogenetic distribution has been identified. Here, the biosensor was further used to assess the Hg methylation capacities of an additional 21 strains related to the Desulfobulbaceae. Seven of them were identified as methylmercury producers. Cultivation procedures combined with bacterial biosensors could provide innovative tools to identify new methylator clades amongst the prokaryotes.

An “on-off” Electrochemiluminescence Biosensor Based on Molecularly Imprinted Polymer and Recycling Amplifications for Determination of Dopamine

A novel of eco-friendly molecularly imprinted electrochemical luminescence biosensor was designed, based on nanomaterials, CdSeTe/ZnS core-shell QDs and molecularly imprinted polymer composites modified glass carbon electrode. Combining the superior selectivity of molecularly imprinted polymer and the high sensitivity of electrochemical luminescence would achieve the trace determination of dopamine. And the cavities in molecularly imprinted polymer after eluting were applied as the substrate to capture target molecular dopamine. The electron transform channel for the redox reaction of CdSeTe/ZnS QDs and co-reaction K2S2O8 was blocked with the increase of dopamine concentration, resulting in the cathodic ECL intensity decreased correspondingly. Therefore, the dopamine was detected in the concentration range from 1×10−14mol/L to 2.5×10−12mol/L, with the low detection limit of 3.3×10−15mol/L. The MIP-ECL biosensor showed easy preparation, low lost, lower detection limit, good selectivity and stability, and could be used for the detection of dopamine in the human serum successfully.

Gold Nanocluster Containing Polymeric Microcapsules for Intracellular Ratiometric Fluorescence Biosensing.

A new approach to sensing and imaging hydrogen peroxide (H2O2) was developed using microcapsule-based dual-emission ratiometric luminescent biosensors. Bovine serum albumin-capped gold nanoclusters (BSA-AuNCs) sensitive to H2O2 were coencapsulated with insensitive FluoSpheres (FSs) within polymeric capsules fabricated via the layer-by-layer method. Under single-wavelength excitation, the microcapsule-based biosensors exhibited emission bands at ∼516 and ∼682 nm resulting from the FSs and BSA-AuNCs, respectively. The polyelectrolyte multilayers lining the microcapsules were effective in protecting BSA-AuNCs from the degradation catalyzed by proteases (chymotrypsin, trypsin, papain, and proteinase K) and subsequent luminescent quenching, overcoming a key limitation of prior BSA-AuNC-based sensing systems. The luminescent response of the sensors was also found to be independent of local changes in pH (5–9). Quenching of the AuNCs in the presence of H2O2 enabled the spectroscopic quantification and imaging of changes in H2O2 concentration from 0 to 1 mM. The microcapsule sensors were easily phagocytized by murine macrophage cells (RAW 264.7), were effective as intracellular H2O2 imaging probes, and were successfully used to detect local release of H2O2 in response to an external chemical stimulus.

Testing Neurotransmitters for Toxicity with a Luminescent Biosensor: Implications for Microbial Endocrinology

Background: The human organism is a complex superorganism including numerous eukaryotic, eubacterial, and archaean cells. The qualitative and quantitative assessment of the microbiota toxicity of chemical agents, i.e., their inhibitory effects on the microbial inhabitants of the human organism in health and disease, seems to hold much value in this context. In this work, a bacterial luminescence-based express test system for microbiota toxicity is applied to neurotransmitters such as serotonin, dopamine, norepinephrine, and histamine. Methods: The biosensor was based on a GM Escherichia coli K12 strain (TGI) that contained the lux operon of the luminescent soil bacterium Photorhabdus luminescencens ZMI. The biosensor was exposed to the action of the tested neurotransmitters for 5 to 60 minutes The intensity of bacterial luminescence (counts.sec-1) was monitored in the control and the experimental samples with a Biotoks 6 ms luminometer (Russia); the toxicity index (T) of the neurotransmitters was determined. Results: A marked toxic effect on bioluminescence was produced by serotonin, histamine, and dopamine at concentrations exceeding 80 µg/ml, 100 µg/ml, and 1 mg/ml, respectively. At lower concentration, these neurotransmitters were “negatively toxic”, i.e. stimulatory in terms of the effect on bacterial luminescence. In contrast, norepinephrine inhibited luminescence at all concentrations tested. Conclusions: The bacterial luminescence-based testing method is applicable to the assessment of the destructive and stimulatory effects of neurotransmitters; the data obtained are of microbiological and clinical relevance.

Engineering the metal sensitive sites in Macrolampis sp2 firefly luciferase and use as a novel bioluminescent ratiometric biosensor for heavy metals.

Most luminescent biosensors for heavy metals are fluorescent and rely on intensity measurements, whereas a few are ratiometric and rely on spectral changes. Bioluminescent biosensors for heavy metals are less common. Firefly luciferases have been coupled to responsive promoters for mercury and arsenium, and used as light on biosensors. Firefly luciferase bioluminescence spectrum is naturally sensitive to heavy metal cations such as zinc and mercury and to pH. Although pH sensitivity of firefly luciferases was shown to be useful for ratiometric estimation of intracellular pH, its potential use for ratiometric estimation of heavy metals was never considered. Using the yellow-emitting Macrolampis sp2 firefly luciferase and site-directed mutagenesis, we show that the residues H310 and E354 constitute two critical sites for metal sensitivity that can be engineered to increase sensitivity to zinc, nickel, and mercury. A linear relationship between cation concentration and the ratio of bioluminescence intensities at 550 and 610nm allowed, for the first time, the ratiometric estimation of heavy metals concentrations down to 0.10mM, demonstrating the potential applicability of firefly luciferases as enzymatic and intracellular ratiometric metal biosensors.

Mobility and toxicity of heavy metal(loid)s arising from contaminated wood ash application to a pasture grassland soil

Heavy metal(loid) rich ash (≤10,000 mg kg−1 total As, Cr, Cu and Zn) originating from the combustion of contaminated wood was subjected to several experimental procedures involving its incorporation into an upland pasture soil. Ash was added to soil that had been prior amended with local cattle manure, replicating practices employed at the farm scale. Metal(loid) concentrations were measured in soil pore water and ryegrass grown on soil/manure plus ash mixtures (0.1–3.0% vol. ash) in a pot experiment; toxicity evaluation was performed on the same pore water samples by means of a bacterial luminescence biosensor assay. Thereafter a sequential extraction procedure was carried out on selected soil, manure and ash mixtures to elucidate the geochemical association of ash derived metal(loid)s with soil constituents. Predictive modelling was applied to selected data from the pot experiment to determine the risk of transfer of As to meat and milk products in cattle grazing pasture amended with ash.The inclusion of manure to soils receiving ash reduced phyto-toxicity and increased ryegrass biomass yields, compared to soil with ash, but without manure. Elevated As and Cu concentrations in pore water and ryegrass tissue resulting from ash additions were reduced furthest by the inclusion of manure due to an increase in their geochemical association with organic matter. Zinc was the only measured metal(loid) to remain uniformly soluble and bioavailable regardless of the addition of ash and manure. Risk modelling on pot experimental data highlighted that an ash addition of >1% (vol.) to this pasture soil could result in As concentrations in milk and meat products exceeding acceptable limits.The results of this study therefore suggest that even singular low doses of ash applied to soil increase the risk of leaching of metal(loid)s and intensify the risk of As transfer in the food chain.

A upconversion luminescene biosensor based on dual-signal amplification for the detection of short DNA species of c-erbB-2 oncogene.

High-sensitivity detection of trace amounts of c-erbB-2 oncogene was reported to be equal to or surpass the ability of CA 15-3 for early diagnosis and/or follow-up recurrent screening of breast cancer. Therefore, in the current study, by using upconversion nanoparticles (UCNPs), rare earth-doped NaYF4:Yb3+/Er3+ as the luminescent labels, a upconversion luminescent (UCL) biosensor based on dual-signal amplification of exonuclease III (ExoIII)-assisted target cycles and long-range self-assembly DNA concatamers was developed for the detection of c-erbB-2 oncogene. The proposed biosensor exhibited ultrasensitive detection with limit as low as 40 aM, which may express the potential of being used in trace analysis of c-erbB-2 oncogene and early diagnosis of breast cancer.

Comprehensive analysis of chemokine-induced cAMP-inhibitory responses using a real-time luminescent biosensor

Chemokine receptors are members of the G-protein-coupled receptor (GPCR) family coupled to members of the Gi class, whose primary function is to inhibit the cellular adenylate cyclase. We used a cAMP-related and PKA-based luminescent biosensor (GloSensor™ F-22) to monitor the real-time downstream response of chemokine receptors, especially CX3CR1 and CXCR4, after activation with their cognate ligands CX3CL1 and CXCL12. We found that the amplitudes and kinetic profiles of the chemokine responses were conserved in various cell types and were independent of the nature and concentration of the molecules used for cAMP prestimulation, including either the adenylate cyclase activator forskolin or ligands mediating Gs-mediated responses like prostaglandin E2 or beta-adrenergic agonist. We conclude that the cAMP chemokine response is robustly conserved in various inflammatory conditions. Moreover, the cAMP-related luminescent biosensor appears as a valuable tool to analyze the details of Gi-mediated cAMP-inhibitory cellular responses, even in native conditions and could help to decipher their precise role in cell function.

Time-resolved luminescence biosensor for continuous activity detection of protein acetylation-related enzymes based on DNA-sensitized terbium(III) probes.

Protein acetylation of histone is an essential post-translational modification (PTM) mechanism in epigenetic gene regulation, and its status is reversibly controlled by histone acetyltransferases (HATs) and histone deacetylases (HDACs). Herein, we have developed a sensitive and label-free time-resolved luminescence (TRL) biosensor for continuous detection of enzymatic activity of HATs and HDACs, respectively, based on acetylation-mediated peptide/DNA interaction and Tb(3+)/DNA luminescent probes. Using guanine (G)-rich DNA-sensitized Tb(3+) luminescence as the output signal, the polycationic substrate peptides interact with DNA with high affinity and subsequently replace Tb(3+), eliminating the luminescent signal. HAT-catalyzed acetylation remarkably reduces the positive charge of the peptides and diminishes the peptide/DNA interaction, resulting in the signal on detection via recovery of DNA-sensitized Tb(3+) luminescence. With this TRL sensor, HAT (p300) can be sensitively detected with a wide linear range from 0.2 to 100 nM and a low detection limit of 0.05 nM. The proposed sensor was further used to continuously monitor the HAT activity in real time. Additionally, the TRL biosensor was successfully applied to evaluating HAT inhibition by two specific inhibitors, anacardic acid and C464, and satisfactory Z'-factors above 0.73 were obtained. Moreover, this sensor is feasible to continuously monitor the HDAC (Sirt1)-catalyzed deacetylation with a linear range from 0.5 to 500 nM and a detection limit of 0.5 nM. The proposed sensor is a convenient, sensitive, and mix-and-read assay, presenting a promising platform for protein acetylation-targeted epigenetic research and drug discovery.

Abstract 4372: Phosphodiesterase 10A inhibition suppresses lung tumor cell growth by activating PKG to inhibit ras and Wnt signaling

Abstract We recently reported that phosphodiesterase 10A (PDE10) is overexpressed in colon tumors and essential for colon tumor cell growth (Li et al., Oncogene 2014), but a role in lung cancer has not been well studied. Human non-small cell lung cancer (NSCLC) cell lines were found to express appreciably higher PDE10 levels compared with normal airway epithelial cells, while silencing of PDE10 expression with siRNA or inhibition of PDE10 activity with small molecule inhibitors selectively inhibits NSCLC cell growth. Here we study the mechanism by which PDE10 inhibitors suppress NSCLC cell growth. At concentrations effective for inhibiting NSCLC cell growth, the PDE10 inhibitor, PQ10 rapidly increases intracellular cGMP levels as determined by a luminescence biosensor assay. Within the same concentration range and time period, PQ10 activates PKA and PKG, demonstrated by an increase in phosphorylation of the substrate, VASP at Ser157 and Ser239, respectively. Under the same conditions, PQ10 suppresses the phosphorylation of Erk1/2 (Thr202/Tyr204), MEK1/2 (Ser217/Ser221) and down-stream p90RSK (Ser380). Similarly, PQ10 increases the phosphorylation of β-catenin at Ser552, but showed no effect on phospho-Ser675 levels. After longer durations of treatment, PQ10 reduces β-catenin levels, as well as proteins that are regulated by β-catenin-dependent TCF/LEF-transcriptional activity, such as survivin and cyclin D1. These effects were mimicked by a novel structurally unrelated PDE10 inhibitor, ADT-020 that selectively inhibits the growth of NSCLC cells and increases cGMP levels in a manner similar to PQ10. ADT-020 also activates PKG in NSCLC cells demonstrated by higher phospho-Ser239 VASP levels and lower β-catenin and survivin levels. These observations suggest that PDE10 inhibition and activation of PKG can simultaneously suppress ras and Wnt signaling that are essential for lung tumor cell growth. Supported by NIH grants 1R01CA155638 and 1R01CA131378 (Piazza). Citation Format: Bing Zhu, Kevin Lee, Joshua Canzoneri, Veronica Ramirez-Alcantara, Sara Sigler, Bernard Gary, Ethan Butler, Adam Keeton, Xi Chen, Michael Boyd, Gary Piazza. Phosphodiesterase 10A inhibition suppresses lung tumor cell growth by activating PKG to inhibit ras and Wnt signaling. [abstract]. In: Proceedings of the 106th Annual Meeting of the American Association for Cancer Research; 2015 Apr 18-22; Philadelphia, PA. Philadelphia (PA): AACR; Cancer Res 2015;75(15 Suppl):Abstract nr 4372. doi:10.1158/1538-7445.AM2015-4372

Progress in chemical luminescence-based biosensors: A critical review.

Biosensors are a very active research field. They have the potential to lead to low-cost, rapid, sensitive, reproducible, and miniaturized bioanalytical devices, which exploit the high binding avidity and selectivity of biospecific binding molecules together with highly sensitive detection principles. Of the optical biosensors, those based on chemical luminescence detection (including chemiluminescence, bioluminescence, electrogenerated chemiluminescence, and thermochemiluminescence) are particularly attractive, due to their high-to-signal ratio and the simplicity of the required measurement equipment. Several biosensors based on chemical luminescence have been described for quantitative, and in some cases multiplex, analysis of organic molecules (such as hormones, drugs, pollutants), proteins, and nucleic acids. These exploit a variety of miniaturized analytical formats, such as microfluidics, microarrays, paper-based analytical devices, and whole-cell biosensors. Nevertheless, despite the high analytical performances described in the literature, the field of chemical luminescence biosensors has yet to demonstrate commercial success. This review presents the main recent advances in the field and discusses the approaches, challenges, and open issues, with the aim of stimulating a broader interest in developing chemical luminescence biosensors and improving their commercial exploitation.

Photobiosensors containing luminescent bacteria.

The scientific basis for producing luminescent biosensors containing free and immobilized luminescent bacteria is discussed. Modern technologies for engineering target objects, procedures used to immobilize bacteria in different carriers, as well as procedures for integral and specific biodetection of toxins are presented. Data regarding generation and application of biomonitoring for ecotoxicants derived from natural and genetically engineered photobacterial strains are analyzed. Special attention is given to immobilization of photobacteria in polyvinyl alcohol-containing cryogel. The main physicochemical, biochemical, and technological parameters for stabilizing luminescence in immobilized bacteria are described. Results of the application of immobilized photobacterial preparations both during discrete and continuous biomonitoring for different classes of ecotoxicants are presented.

A time-resolved luminescence biosensor assay for anaplastic lymphoma kinase (ALK) activity.

A novel time-resolved luminescence biosensor assay for anaplastic lymphoma kinase (ALK) was developed. We used a straightforward strategy to modify a known ALK substrate into a peptide biosensor that can accommodate terbium luminescence sensitization upon its phosphorylation by ALK. Since this strategy is generalizable, this high-throughput screening compatible assay serves as an example for development of other kinase assays that employ terbium luminescence as a read-out.

Microencapsulated Aliivibrio fischeri in alginate microspheres for monitoring heavy metal toxicity in environmental waters.

In this article a luminescence fiber optic biosensor for the microdetection of heavy metal toxicity in waters based on the marine bacterium Aliivibrio fischeri (A. fischeri) encapsulated in alginate microspheres is described. Cu(II), Cd(II), Pb(II), Zn(II), Cr(VI), Co(II), Ni(II), Ag(I) and Fe(II) were selected as sample toxic heavy metal ions for evaluation of the performance of this toxicity microbiosensor. The loss of bioluminescence response from immobilized A. fischeri bacterial cells corresponds to changes in the toxicity levels. The inhibition of the luminescent biosensor response collected at excitation and emission wavelengths of 287 ± 2 nm and 487 ± 2 nm, respectively, was found to be reproducible and repeatable within the relative standard deviation (RSD) range of 2.4–5.7% (n = 8). The toxicity biosensor based on alginate micropsheres exhibited a lower limit of detection (LOD) for Cu(II) (6.40 μg/L), Cd(II) (1.56 μg/L), Pb(II) (47 μg/L), Ag(I) (18 μg/L) than Zn(II) (320 μg/L), Cr(VI) (1,000 μg/L), Co(II) (1700 μg/L), Ni(II) (2800 μg/L), and Fe(III) (3100 μg/L). Such LOD values are lower when compared with other previous reported whole cell toxicity biosensors using agar gel, agarose gel and cellulose membrane biomatrices used for the immobilization of bacterial cells. The A. fischeri bacteria microencapsulated in alginate biopolymer could maintain their metabolic activity for a prolonged period of up to six weeks without any noticeable changes in the bioluminescence response. The bioluminescent biosensor could also be used for the determination of antagonistic toxicity levels for toxicant mixtures. A comparison of the results obtained by atomic absorption spectroscopy (AAS) and using the proposed luminescent A. fischeri-based biosensor suggests that the optical toxicity biosensor can be used for quantitative microdetermination of heavy metal toxicity in environmental water samples.

Development of a Pseudomonas aeruginosa Agmatine Biosensor.

Agmatine, decarboxylated arginine, is an important intermediary in polyamine production for many prokaryotes, but serves higher functions in eukaryotes such as nitric oxide inhibition and roles in neurotransmission. Pseudomonas aeruginosa relies on the arginine decarboxylase and agmatine deiminase pathways to convert arginine into putrescine. One of the two known agmatine deiminase operons, aguBA, contains an agmatine sensitive TetR promoter controlled by AguR. We have discovered that this promoter element can produce a titratable induction of its gene products in response to agmatine, and utilized this discovery to make a luminescent agmatine biosensor in P. aeruginosa. The genome of the P. aeruginosa lab strain UCBPP-PA14 was altered to remove both its ability to synthesize or destroy agmatine, and insertion of the luminescent reporter construct allows it to produce light in proportion to the amount of exogenous agmatine applied from ~100 nM to 1mM. Furthermore it does not respond to related compounds including arginine or putrescine. To demonstrate potential applications the biosensor was used to detect agmatine in spent supernatants, to monitor the development of arginine decarboxylase over time, and to detect agmatine in the spinal cords of live mice.

Split-luciferase complementary assay: applications, recent developments, and future perspectives.

Bioluminescent systems are considered as potent reporter systems for bioanalysis since they have specific characteristics, such as relatively high quantum yields and photon emission over a wide range of colors from green to red. Biochemical events are mostly accomplished through large protein machines. These molecular complexes are built from a few to many proteins organized through their interactions. These protein-protein interactions are vital to facilitate the biological activity of cells. The split-luciferase complementation assay makes the study of two or more interacting proteins possible. In this technique, each of the two domains of luciferase is attached to each partner of two interacting proteins. On interaction of those proteins, luciferase fragments are placed close to each other and form a complemented luciferase, which produces a luminescent signal. Split luciferase is an effective tool for assaying biochemical metabolites, where a domain or an intact protein is inserted into an internally fragmented luciferase, resulting in ligand binding, which causes a change in the emitted signals. We review the various applications of this novel luminescent biosensor in studying protein-protein interactions and assaying metabolites involved in analytical biochemistry, cell communication and cell signaling, molecular biology, and the fate of the whole cell, and show that luciferase-based biosensors are powerful tools that can be applied for diagnostic and therapeutic purposes.

Photoluminescence intensity enhancement in SWNT aqueous suspensions due to reducing agent doping: Influence of adsorbed biopolymer

The influence of biopolymer wrapped around nanotube on the enhancement of the semiconducting single-walled carbon nanotube (SWNT) photoluminescence (PL) in aqueous suspension which increases due to the reducing agent dithiothreitol (DTT) doping effect was revealed. The greatest enhancement of PL was observed for SWNTs covered with double- or single stranded DNA (above 170%) and DTT weak influence was revealed for SWNTs:polyC suspension (∼45%). The magnitude of the PL enhancement depends also on nanotube chirality and sample aging. The behavior of PL from SWNTs covered with various polymers is explained by the different biopolymers ordering on the nanotube surface. The ordered polymer conformation on the nanotube weakens the reducing agent doping effect. The method of reducing agent doping of nanotube:biopolymer aqueous suspension can serve as a sensitive luminescent probe of the biopolymer ordering on the carbon nanotube and can be used to increase the sensitivity of luminescent biosensors.

Luminescent nanosized cell markers on the basis of llantanum phosfate

Luminescent properties of Lanthanum phosphate nanoparticles, doped with Europium cations with functional oligoperoxide shell were investigated. Water- and organic dispersion polymerization of a mixture of polar functional monomers, initiated by peroxide groups localized on the surface of LaPO4 • Eu3+ were carried out. Kinetic regularities of polymerization were investigated and the parameters of control were established. Grafting of functional polymer chains by water- and organic dispersion polymerization provides nanoparticles affinity to specific environments and materials, reactivity, biological tolerance and / or the possibility of binding to substrates of different nature for use in creating of luminescent biosensors and cell markers. Nanoparticles LaPO4 • Eu3+ with grafted poly(N-vinylpirrolidone - glycidyl methacrylate) polymeric shell were studied as analytical reagents for melanoma cancer cells labeling. When performing the study, the optimal concentrations of nanoparticles for cell labeling were determined.