Luminance Values Research Articles

Road Marking Contrast Threshold Revisited

ABSTRACT Sufficient contrast between road surface and road markings is key for a safe and comfortable driving experience. This calls for a comprehensive and well established contrast (threshold) model, which ideally results in a single contrast threshold value independent of object angular size or road luminance. The contrast threshold model introduced by Adrian is still commonly used in road lighting. More recently, new contrast metrics that also predict supra-threshold contrast visibility have been proposed, but the corresponding visibility thresholds are not yet known. In the present study, participants are presented a rendering of a highway, including road marking arrows of various size and luminance and were asked to indicate the direction of the arrow. The luminance of the road surface, acting as background for the markings, was varied too. Due to the very low luminance values and the very small differences in luminance, measurement accuracy and calibration issues require special attention. The results show good agreement with Adrian’s visibility model (R2 = 0.75) in terms of luminance contrast, background luminance and size. In addition, we used our experimental data to define contrast thresholds for several other existing image based contrast models. Unfortunately, it seems to be impossible to state one unique threshold contrast value independent of object angular size and road luminance.

Tunnel Illumination: Algorithm to Determine Standard Values of Luminance in Tunnel Zones Using C Programming Language Approach

Tunnel illumination design involves complex mathematical computation, cumbersome, and tedious to perform when done by hand. This paper proposes an algorithm to compute luminance and luminous flux of the different zones of the tunnel by following the International Commission on Illumination (CIE88:2004) standard design guidelines using the C programming language. The luminance and the luminous flux values of all the zones were calculated and compared with the CIE standard. The energy consumption of each zone is equally found to control and reduce energy wastage and payment of unwanted bills. The threshold zone length Lth, average luminance in the first half Lav, and the last half of the threshold zone are 40 m, 400 cd/m2, and 240 cd/m2, respectively, while the average luminance of the transition and interior zones are, respectively, 95.87 cd/m2 and 5.86 cd/m2. The results obtained were satisfying. The computational results showed that the proposed Algorithm could be used to design an efficient tunnel illumination system with less energy waste.

First optical observation of 10B-neutron capture reactions using a boron-added liquid scintillator for quality assurance in boron neutron capture therapy.

10B-neutron capture was observed optically using a boron-added liquid scintillator. Trimethyl borate was dissolved in a commercially available liquid scintillator at natural boron concentrations of approximately 1 wt% and 0.25 wt%. The boron-added liquid scintillator was placed in a phantom quartz bottle and irradiated by thermal neutrons (~ 105 n/[cm2 s]) for 150, 300, and 600s. The luminescence of the liquid scintillator was clearly observed using a cooled charge-coupled device (CCD) camera during irradiation. The luminance value recorded by the CCD camera was proportional to the duration of irradiation by thermal neutrons. The luminescence distribution showed reasonable agreement with that of energy deposition by Li and alpha particles from 10B-neutron capture reactions calculated via Monte Carlo simulations. When trimethyl borate was not dissolved in the liquid scintillator (0 wt% natural boron), no visible luminescence was observed even after 600s of irradiation. These findings demonstrate that the observed luminance originates from the Li and alpha particles generated by 10B-neutron capture reactions. Consequently, the luminescence distribution is directly related to the boron dose of the liquid scintillator. To the best of our knowledge, direct experimental optical observations of boron dose distribution have not yet been reported. This novel technique will be useful for quality assurance in boron neutron capture therapy (BNCT) because instantaneous neutron irradiation may be sufficient for the observing the intense neutron beam used in clinical BNCT (~ 109 n/[cm2 s]), and quick evaluation of the boron dose distribution is expected to be feasible.

Analysis of LLL System Properties for Different Excitation Parameters

Photoluminescent strips forming a Low Location Lighting (LLL) system are the primary method for marking escape routes on passenger ships. The LLL system can be built as a self-luminous system (powered by electricity) or made as a series of strips made of photoluminescent materials, which glow and indicate the escape route after the loss of basic and emergency lighting. To ensure correct visual guidance, these strips must be installed at specific locations in the passageways and achieve appropriate photometric parameters after a certain time from their activation. The properties of the LLL system depend on the type of luminescent material used, the excitation source, and the exposure parameters. This paper presents the results of laboratory tests on two types of photoluminescent materials used for the construction of LLL systems. We recorded the change in luminance after the loss of excitation and measured the luminance values obtained 10 and 60 min after the loss of excitation under exposure to light sources commonly used for interior lighting on passenger ships. It turns out that replacing fluorescent lamps with LED lamps can reduce the luminance of the LLL system.

Color-Stable and High-Efficiency Blue Perovskite Nanocrystal Light-Emitting Diodes via Monovalent Copper Ion Lowering Lead Defects.

Light-emitting diodes using metal halide perovskite (PeLEDs) exhibit a strong potential for emerging display technologies due to their unique optoelectronic characteristics. However, for blue emission PeLEDs, there remains a huge challenge to achieve high performance, an issue that has been addressed in their red and green counterparts. The community is circumventing the challenges in synthesizing stable, high-quantum-efficiency, and low-defect-density blue emitters. Here, a facile strategy that replaces Pb by adding a monovalent ion Cu+, in this case into CsPbClBr2 perovskite, is carried out. This decreases the Pb dangling bonds and increases the radiative recombination for the enhancement of blue emission. The nanoparticles obtained by this method maintain a blue emission at 479 nm. The photoluminescence quantum yield is 2 times higher than the pristine analogue. The corresponding perovskite nanocrystal (PNC) LEDs achieve stable electroluminescence spectrum at high brightness. Simultaneously, the optimal blue PNC LEDs obtain the maximum values of luminance and external quantum efficiency of 1537 cd m-2 and 3.78%, respectively. And the device realizes typical blue light CIE chromaticity coordinates of (0.098, 0.123). Our work reveals that the substitution of Pb by heterovalent ions significantly decreases nanocrystal defects, which will pave the way of perovskite LEDs for practical applications in the future.

Evaluation of intercellular lipid lamellae in the stratum corneum by polarized microscopy.

Intercellular lipids contain a lamellar structure that glows in polarized images. It could be expected that the intercellular lipid content be estimated from the luminance values calculated from polarized images of stratum corneum strips. Therefore, we attempted to develop a method for simple and rapid evaluation of the intercellular lipid content through a procedure. Herein, we demonstrated a relationship between the luminance value and the amount of ceramides, one of the main components of intercellular lipids. The stratum corneum was collected from the forearm using slides with a pure rubber-based adhesive, which did not produce unnecessary luminescence under polarizing conditions. Images were analyzed using luminance indices. The positive secondary ion peak images were obtained using the time of flight-secondary ion mass spectrometry; the polarized and brightfield images were obtained using a polarized microscope. The ceramide and protein amount was measured by high-performance liquid chromatography and bicinchoninic acid protein assay after microscope imaging. Images and quantitative values were used to construct evaluation models based on a convolutional neural network (CNN). There was a correlation between the highlighted areas of the polarized image to overlap with the area where ceramide-derived peak was detected. Evaluation of the CNN-based model of the polarized images predicted the amount of ceramides per unit of stratum corneum. The method proposed in the study enabled a large number of specimens to provide a simple, rapid, and efficient evaluation of the intercellular lipid content.

Flexible Fiber Conditioner for Fine Conditioning of Polishing Pad and its Evaluation in Chemical Mechanical Polishing: Verification of SUS-FFC on Soft Urethane Foam Pad and Proposal of PEEK-FFC

Polishing pad conditioning is essential for achieving stable chemical mechanical polishing (CMP). While diamond disk conditioners (DDCs) are often applied, flexible fiber conditioners (FFCs) have been proposed as a new conditioning tool. FFCs are intended for roughening the pad surface appropriately by bundling fine wire fibers. Our previous study demonstrated the fine conditioning characteristics of FFCs for a hard urethane foam pad. In this study, the conditioning characteristics of an FFC are compared with those of a DDC. First, we evaluate the conditioning performance of an FFC using SUS fibers on a soft urethane foam pad. The result indicates that on a soft pad, the SUS-FFC can restore the pad surface asperities more finely, as confirmed via the stabilized number of contact points based on contact image and luminance value distribution analyses. Subsequently, for a metal-contamination-free FFC process intended for semiconductor CMP, we develop an FFC fabricated using polyether ether ketone (PEEK) and verify its performance via the CMP test of a silicon oxide film. It is shown that the hard pad can be conditioned using the developed PEEK-FFC; this implies that a stable removal rate can be realized immediately after pad break-in conditioning.

The Development Of Brigthness Evaluation Method For Digital Billboards

LED-based billboards are becoming increasingly popular due to their low cost, flexibility, and efficiency. On another side, the too-bright digital billboard may pose a potential threat to road safety. The driver’s perception of advertising depends on the different factors, including the billboard’s luminance value. The aim of the study was to develop the assessment method for the digital screen parameters (luminance or illumination) which could be applied by supervising authorities, using budget-friendly devices, such as a lux meter and could be used during the billboard active operation. We tested the recommended method of OAAA and concluded that it is not applied for large billboards (over 25 square-meter) due to the calculated far distance and low sensitivity of lux meter. We have developed the new method based on driver discomfort glare and De Boer ratio. The ratio helps to determine how likely a display is to cause discomfort to those around it. The lower the value, the less discomfort the driver will experience from the billboard. The new method is applied for the active and different size billboard and using lux meter that is not an expensive device. Moreover, we take into account the glare effect of billboard on drivers’ vision.

Dy3+-doped lithium aluminoborate glass for luminescent light guides with high luminance

Lithium aluminoborate glass optically activated with the lanthanide ion dysprosium is investigated for its potential as luminescent light guide. For this, ray-tracing simulations are performed on the basis of transmission, photoluminescence, and quantum efficiency measurements. The luminous flux at the end of the light guide depends significantly on its length as well as on the roughness of the output face. The best results are obtained for a light guide length of 70–80 mm with the side faces of the light guide coated with a 100 % reflecting mirror and a rough output face with Lambertian scattering characteristic. An additional coating of the input face with a half-transmitting mirror is investigated. The mirror is transmissive for the excitation wavelength of 388 nm but reflective for the emission bands in the visible spectral range. For this light guide, a luminance of approximately 20 cd/mm 2 is achieved for an excitation power density of 1 W/mm 2 . The geometry of the light guide (cuboid/cylinder) has only a slight effect on the maximum luminance value. • Analytical estimate of luminescence output of dysprosium-doped light guides. • Ray-tracing simulations for different lengths, surface properties, and geometries. • Maximum luminance of approximately 20 cd/mm 2 for 388-nm excitation.

Usefulness of Fractal Analysis of Kirsch Edge Images for the Tissue Fragment Inner Structure in Breast FNAB

Objective: Recent advances in high-precision mammography and ultrasound screening have led to an increase in the detection of early lesions (ductal carcinoma in situ and small cancers) appearing as microcalcified lesions or microcystic images, and there needs to be an improvement in the accuracy of breast fine-needle aspiration biopsy (FNAB) assessing these lesions. The objective of this study was to investigate whether fractal analysis of Kirsch edge images for the tissue fragment inner structure (FKT) is useful in breast FNAB. FKT measures tissue fragment chromasia of hyperchromatic crowded tissue fragments (HCG), tissue fragment shape unevenness, and tissue fragment inner structure complexity. Study Design Materials: Nineteen epithelial tissue fragments of fibroadenoma (FA) from 7 patients and 52 tissue fragments of invasive breast carcinoma of no special type (IBC-NST) (grade 1–2) from 11 patients were assessed. First, tissue fragments were classified into small (smaller than 60 × 102 μm²), medium, and large (100 × 102 μm² or larger), and the appearance rate of each size was determined. Second, for FKT, the luminance value of tissue fragment chromasia, the unevenness and fractal value, and the tissue fragment inner structure complexity were determined. In statistical analysis, the Steel-Dwass test, nonlinear discriminant analysis, and receiver operating characteristic analysis were performed, setting the significance level at p < 0.05. Results: “Unevenness of the tissue fragment shape,” “fractal value of the tissue fragment shape,” and “fractal value of the tissue fragment inner structure” were significantly higher in small and large tissue fragments in IBC-NST compared with those in FA. The specificity and sensitivity were the highest (100%) in small tissue fragments in multivariate analysis using 4 variables (“luminance value of tissue fragment chromasia,” “unevenness of tissue fragment shape,” “fractal value of the tissue fragment shape,” and “fractal value of the tissue fragment inner structure”). Conclusion: FKT, which evaluates “tissue fragment darkness,” “tissue fragment shape unevenness,” and “tissue fragment inner structure complexity” focusing on small tissue fragments of HCG in breast FNAB, is useful as a system that assists cytopathological assessment of breast FNAB.

Analysis of potential regulatory LncRNAs and CircRNAs in the oxidative myofiber and glycolytic myofiber of chickens

SART and PMM are mainly composed of oxidative myofibers and glycolytic myofibers, respectively, and myofiber types profoundly influence postnatal muscle growth and meat quality. SART and PMM are composed of lncRNAs and circRNAs that participate in myofiber type regulation. To elucidate the regulatory mechanism of myofiber type, lncRNA and circRNA sequencing was used to systematically compare the transcriptomes of the SART and PMM of Chinese female Qingyuan partridge chickens at their marketing age. The luminance value (L*), redness value (a*), average diameter, cross-sectional area, and density difference between the PMM and SART were significant (p < 0.05). ATPase staining results showed that PMMs were all darkly stained and belonged to the glycolytic type, and the proportion of oxidative myofibers in SART was 81.7%. A total of 5 420 lncRNAs were identified, of which 365 were differentially expressed in the SART compared with the PMM (p < 0.05). The cis-regulatory analysis identified target genes that were enriched for specific GO terms and KEGG pathways (p < 0.05), including striated muscle cell differentiation, regulation of cell proliferation, regulation of muscle cell differentiation, myoblast differentiation, regulation of myoblast differentiation, and MAPK signaling pathway. Pathways and coexpression network analyses suggested that XR_003077811.1, XR_003072304.1, XR_001465942.2, XR_001465741.2, XR_001470487.1, XR_003077673.1 and XR_003074785.1 played important roles in regulating oxidative myofibers by TBX3, QKI, MYBPC1, CALM2, and PPARGC1A expression. A total of 10 487 circRNAs were identified, of which 305 circRNAs were differentially expressed in the SART compared with the PMM (p < 0.05). Functional enrichment analysis showed that differentially expressed circRNAs were involved in host gene expression and were enriched in the AMPK, calcium signaling pathway, FoxO signaling pathway, p53 signaling pathway, and cellular senescence. Novel_circ_004282 and novel_circ_002121 played important roles in regulating oxidative myofibers by PPP3CA and NFATC1 expression. Using lncRNA-miRNA/circRNA-miRNA integrated analysis, we identified many candidate interaction networks that might affect muscle fiber performance. Important lncRNA-miRNA-mRNA networks, such as lncRNA-XR_003074785.1/miR-193-3p/PPARGC1A, regulate oxidative myofibers. This study reveals that lncXR_003077811.1, lncXR_003072304.1, lncXR_001465942.2, lncXR_001465741.2, lncXR_001470487.1, lncXR_003077673.1, XR_003074785.1, novel_circ_004282 and novel_circ_002121 might regulate oxidative myofibers. The lncRNA-XR_003074785.1/miR-193-3p/PPARGC1A pathway might regulate oxidative myofibers. All these findings provide rich resources for further in-depth research on the regulatory mechanism of lncRNAs and circRNAs in myofibers.

Digestive physiological characteristics of black soldier fly larvae reared on five organic wastes

Black soldier fly larvae (BSFL) are able to utilise a broad range of organic wastes to fulfil their growth needs. To acquire this basic knowledge of its digestive adaptation to various food, five organic wastes (soybean meal [SBM], wheat bran [WB], beer yeast [BY], kitchen waste [KW] and chicken manure [CM]) were fed to 3-day-old BSFL for 16 days. The growth performance, luminal pH of the gut, midgut histology, digestive enzyme activity and intestinal bacterial microbiota of the larvae were assessed. Growth performance was greatest in the KW group followed by the SBM group and was worst in the CM group. Nutrient compositions of larvae were not significantly affected by those of the food sources, with the exception of crude ash. The ultrastructural observations of midgut showed the number of mitochondria in CM and BY groups was less than other three groups. Twenty-four hours after feeding, weakly acidic, acidic, strongly acidic, and alkaline luminal pH values were detected in the anterior, middle and posterior segments of the gut in all groups, but the luminal pH values of the hindgut varied with food source. Significant lipase and esterase activity, cellulase activity, and amylase activity were detected in the intestines of larvae reared on KW, WB and BY, respectively, revealing that digestive enzyme activity was closely associated with the nutrient composition of the food source. Bacterial composition and diversity differed significantly between groups and were characterised by specific indicator bacteria, which may play important roles in food digestibility. The results suggested that different food sources induced adaptive physical, chemical and biological changes in the digestive tracts of BSFL and may indicate that BSFL developed specific strategies for nutrient utilisation and accumulation. The knowledge acquired here will be beneficial for developing rearing protocols to optimise bioconversion in this insect for their various applications.

Visualization of Combustion Phases of Biomass Particles: Effects of Fuel Properties.

This work established a high-speed camera-assisted visualization system that investigated the effect of volatile matter and fixed carbon content in biomass particles on single-particle combustion phases and their luminous properties. Three types of biomass particles, namely, sawdust (a mixture of pine and willow), corncob, and rice husk, were examined on a Hencken flat-flame burner. The luminous region and intensity of single biomass particles were closely related to the flammability and calorific value of biomass fuel and derived by analyzing a sequence of images captured using a high-speed camera. The combustion temperature was determined through analysis of its radiant energy. The results showed that the ignition mechanisms of volatile matter and fixed carbon corresponded to homogeneous and heterogeneous reactions, respectively. The maximum luminous region values of 1.75 × 106, 2.1 × 106, and 1.0 × 106 μm2 for sawdust (SD), corncob (CC), and rice husk (RH) correlated to the volatile matter content of each biomass sample, which was 69.38, 74.15, and 64.56%, respectively. Because of the high fixed carbon content, the peak temperature of the SD particles could reach 1549 °C. The luminous region and intensity of the combusting particles were significantly affected by the volatile matter and fixed carbon, respectively.

Functional Luminal Imaging Probe in the Management of Pediatric Esophageal Disorders.

Functional luminal imaging probe (FLIP) measures pressure-geometry relationships of digestive luminal space. When used in esophageal disorders, it provides several luminal parameters that help better understand the pathophysiology. Data about the potential utility of FLIP in pediatrics are scarce and there is no standardized use in children. We aim to describe the use of FLIP in our center, its safety, feasibility, and clinical impact in esophageal disorders in children. Consecutive FLIP recordings performed at the Centre Hospitalier Universitaire-Sainte-Justine, Montréal, Canada between February 2018 and January 2021 were extracted. A chart review was conducted for demographics and medical history. Symptomatology after the procedure was evaluated with validated dysphagia scores. Nineteen patients were included (11 girls, median age 16 years, range 3.2-19.6) with achalasia (n = 5), post-Heller's myotomy dysphagia (n = 3), esophagogastric junction outflow obstruction (n = 3), congenital esophageal stenosis (n = 2); post-esophageal atresia repair stricture (n = 3), and post-fundoplication dysphagia (n = 3). There was no significant correlation between integrated relaxation pressure measured with high resolution manometry and distensibility index (DI). The use of FLIP made it possible to differentiate between dysphagia related to an esophageal obstruction (DI < 2.8 mm2/mmHg) and dysphagia without major motility disorder (DI > 2.8 mm2/mmHg) that guided the indication for dilation. FLIP led to a change in management in 47% of the patients. Forty-seven percent of the patients were symptom free at the time of the evaluation. FLIP provides key esophageal luminal values and therefore can play an important role in pediatric esophageal disorders management.

Average Luminance Calculation in Street Lighting Design, Comparison between BS-EN 13201 and RP-08 Standards

This paper presents a study on the influence of the observer’s position in relation to the calculation surface. This is the initial observation of the research, respectively that the two standards consider the position of the observer differently. For these situations, two types of calculations were performed. For the first set of calculations, the software used was DIALux 4.13 as this software can perform calculations in line with the RP-08 standard. The second set of calculations was performed with a script that offers the possibility to change the observer’s position. The conclusion was that EN-13201 has a better approach, but both standards could be improved. The second case study refers to the influence of the longitudinal observer position in an average luminance calculation. If one considers RP-08 as a guideline for performing the calculations, the conclusions are that changing the distance from the observer to the calculation surface has absolutely no effect on the average luminance value. On the other hand, if European standards are used as a guideline, changing the distance (from the standardized 60 m, either closer to the calculation surface or further away) can influence the overall results in average luminance and uniformity. Taking into account the results of these two case studies, the conclusion is that both RP-08 and BS-EN 13201 should be updated so that the observer’s distance in relation to the calculation surface would be a variable dependent on the stopping distance calculated based on the speed limit of the road.

An in vitro assessment of light intensity provided during direct laryngeal visualization by videolaryngoscopes with Macintosh geometry blades.

Adequate illumination of the larynx is needed during laryngoscopy to facilitate tracheal intubation. The International Organization for Standardization (ISO) has established a minimum light intensity for direct laryngoscopy (DL) of over 500 lux for at least ten minutes, but no such standard exists for Macintosh geometry videolaryngoscope (Mac-VL) blades, which allow for both direct or indirect (videoscopic) viewing of the larynx. Using in situ bench and in vitro testing in a human cadaver, we determined illumination and luminance values delivered by various Mac-VLs and compared these with published minimum lighting benchmarks as well as a reference direct laryngoscope. We tested six Mac-VLs (i-view™, McGRATH™ MAC, GlideScope® Spectrum™ [single-use] DVM S4, GlideScope® Titanium [reusable] Mac T4, C-MAC® S [single-use] Macintosh #4, C-MAC® [reusable] Macintosh #4) together with one direct laryngoscope (Heine LED). Each laryngoscope was assessed with three measurements, as follows: part 1: illuminance (lux) was measured in situ using a purpose-designed benchtop light intensity measurement apparatus; part 2: luminance (light reflected back to the eye) was measured (in candela m-2 [cd·m-2]) during videolaryngoscopy (VL) and DL in a human cadaver using a spot meter pointed at the interarytenoid notch; part 3: illuminance (lux) was measured during VL and DL in a human cadaver using a light meter surgically implanted just proximal to the vocal cords. Illuminance and luminance varied significantly among the Mac-VLs. Mean (standard devitation) illuminance among the six tested Mac-VLs ranged from 117 (11) to 2,626 (42) lux in the measurement apparatus and from 228 (11) to 2,900 (374) lux by the surgically implanted light meter in the cadaver. All values were less than the reference Heine direct laryngoscope and some fell below the published ISO standard of 500 lux for DL. Luminance testing by spot meter had a similarly wide range, varying from 3.78 (0.60) to 49.1 (10.4) cd·m-2, with some Mac-VLs delivering less luminance than the reference Heine direct laryngoscope. Our results indicate that illuminance and luminance provided by Mac-VLs used for direct laryngeal viewing varies substantially between devices, with some falling below standards previously suggested as the minimum required for DL. While this may have no implications for the quality of image visible on a device's video monitor, the clinician should be aware that when Mac-VLs are used for direct viewing of the larynx, lighting may not be optimal. This might adversely affect ease or success of tracheal intubation.

Selected Issues on Material Properties of Objects in Computer Simulations of Floodlighting

This paper addresses issues with computer simulation involved in designing illumination for architectural structures. In particular, the reflectance and transmittance of materials were studied with respect to their influence on luminance values, thus directly the power levels for luminaires applied under particular projects. Raster images derived from digitally processed daytime pictures were used to precisely define material properties. Bitmaps were tested with regard to measuring and editing materials with a widely used graphic application. A real architectural object, the Basilica of the Dormition in Jerusalem, served as the test object. A floodlighting design was performed following a complete analysis of all electrical and photometric parameters. Luminance distributions were analysed comprehensively. Hence, the data allowed for an assessment of the lighting design compliance with guidance given by International Commission on Illumination (CIE) for floodlighting objects and its required standards. The floodlighting utilization factor of the lighting solution developed was also verified, as it is the input parameter for evaluating not only the energy efficiency for the installed lighting system, but also the impact it has on the surroundings, in this case, the project that is to be implemented.

Physical characterization of Ag:WO3 cermet films used as top electrode for stable and high contrast organic light-emitting diodes

A low reflectance green top-emitting OLED using a cermet Ag:WO3 thin film as a top cathode has been fabricated and fully characterized. The cermet film has been made by co-evaporating Ag and WO3 materials. Depending on the Ag concentration in the WO3 matrix, the optical and electrical properties vary a lot, as this will be investigated by optical simulations as well as by studying single film properties deposited on silicon and glass wafers. A plasmonic absorption of Ag occurs for metal concentrations around 60–70%, which confirms the “nano” nature of the cermet material, with Ag nanocrystals embedded in an amorphous WO3 oxide matrix (also confirmed by TEM). Using an optimal (optical, electrical) Ag:WO3 (70%) cermet composition as a top electrode in the OLED allows to strongly reduce the device mean reflectance in the visible while its contrast ratio becomes far better (maximum + 76% at 1000 lux) than a reference green device (with Ag as top electrode instead of Ag:WO3). The device with the cermet shows very good lifetimes when driven at constant current drive: an extrapolated lifetime of 90 000 h at 100 cd/m2 has been estimated, based on accelerating ageing tests done for 1000 cd/m2 to 20 kcd/m2 initial luminance values.

Pixel-wise parallel calculation for depth from focus with adaptive focus measure

Depth-from-focus methods can estimate the depth from a set of images taken with different focus settings. We recently proposed a method that uses the relationship of the ratio between the luminance value of a target pixel and the mean value of the neighboring pixels. This relationship has a Poisson distribution. Despite its good performance, the method requires a large amount of memory and computation time because it needs to store focus measurement values for each depth and each window radius on a pixel-wise basis, and filtering to compute the mean value, which is performed twice, makes the relationship among neighboring pixels too strong to parallelize the pixel-wise processing. In this paper, we propose an approximate calculation method that can give almost the same results with a single time filtering operation and enables pixel-wise parallelization. This pixel-wise processing does not require the aforementioned focus measure values to be stored, which reduces the amount of memory. Additionally, utilizing the pixel-wise processing, we propose a method of determining the process window size that can improve noise tolerance and in depth estimation in texture-less regions. Through experiments, we show that our new method can better estimate depth values in a much shorter time.

Novel approach in sensory color masking: Effects of colored environments on chocolates with different cocoa content

In sensory practice, the color masking procedure is executed almost exclusively with red light, regardless of the color of the product. In this work the practical application of a novel approach for sensory masking of color differences, hence the applicability of a spectrally tunable light booth was investigated. The aim of the research was to find the most appropriate masking environment, which i) can be considered as the most effective mask and ii) provides the best conditions regarding chromatic adaptation.The main idea of the novel approach in sensory color masking is that the instrumental characterization of all parameters influencing the perception of the sensory assessor. The comparison of the potential masking illuminations based on instrumental results (considering masking effect and chromatic adaptation) and the definition of the most appropriate mask should be accomplished based on sensory tests. The sensory effects of colored environments were tested on chocolate samples containing different amount of cocoa. CIELAB dE color differences between the samples were calculated based on their spectral reflectance. Four monochromatic (red, green, blue, amber) and six combined masking illuminations were developed in a spectrally tunable light booth and were instrumentally characterized by their spectral power distribution and luminance values. The chocolates were ranked according to their darkness by the assessors. The masking environments were compared based on the analysis of sequence correctness, decision time, and their combination (ANOVA, Survival-analysis).In Experiment 1 the monochromatic Blue light was not only more effective, than the commonly used Red light, but it was the most effective mask regarding color differences: the sequence error increased to 61% compared to the standard white (D65) illumination, and the decision time increased to more than double (15.74 s → 35.7 s). In Experiment 2 green and amber lights were combined with the blue mask, increasing the degree of chromatic adaptation: decision time decreased while the effectiveness of the mask did not decrease based on the sequence errors. Following the novel approach product specific masking environment considering effectiveness and chromatic adaptation was realized verified by statistical analysis of sensory test results.