Lower Growth Rate Research Articles

Model of Spatial and Sectoral Development of Regions on the Basis of Interregional Interaction

The article is devoted to the study of the problems of spatial and sectoral development of regions on the basis of interregional interaction. The main scientific research within the framework of the spatial approach carried out since 2000 is presented. It has been shown that the work of domestic modern scientists is focused on finding spatial and sectoral priorities for building effective models of mutually beneficial cooperation between the regions of the country. On the example of the Republic of Buryatia and the Trans-Baikal Territory (as regions with positive economic complementarity), an assessment of the localization coefficient of the type of activity and the per capita production coefficient was carried out. The main problems and threats similar to the analyzed regions are presented, including: relatively low growth rate of the average per capita gross regional product in comparison with the average Russian level; relatively low investment attractiveness and an unfavorable institutional environment; incomplete use of production facilities; and low efficiency of realization of economic potential. Spatial and sectoral priorities have been identified; a model of mutually beneficial interregional interaction between the Republic of Buryatia and the Zabaykalsky Krai was built, ensuring the growth of the economies of integrating regions. It was concluded that the territorial division of the Russian Federation into macro-regions makes it possible to consider all possible vectors of interregional interaction from the standpoint of effective implementation of the synergistic potential of their spatial and sectoral development.

Accurately Measuring the Infrared Spectral Emissivity of Inconel 601, Inconel 625, and Inconel 718 Alloys during the Oxidation Process.

Accurate measurement of the infrared spectral emissivity of nickel-based alloys is significant for applications in aerospace. The low thermal conductivity of these alloys limits the accuracy of direct emissivity measurement, especially during the oxidation process. To improve measurement accuracy, a surface temperature correction method based on two thermocouples was proposed to eliminate the effect of thermal conductivity changes on emissivity measurement. By using this method, the infrared spectral emissivity of Inconel 601, Inconel 625, and Inconel 718 alloys was accurately measured during the oxidation process, with a temperature range of 673-873 K, a wavelength range of 3-20 μm, and a zenith angle range of 0-80°. The results show that the emissivity of the three alloys is similar in value and variation law; the emissivity of Inconel 718 is slightly less than that of Inconel 601 and Inconel 625; and the spectral emissivity of the three alloys strongly increases in the first hour, whereafter it grows gradually with the increase in oxidation time. Finally, Inconel 601 has a lower emissivity growth rate, which illustrates that it possesses stronger oxidation resistance and thermal stability. The maximum relative uncertainty of the emissivity measurement of the three alloys does not exceed 2.6%, except for the atmospheric absorption wavebands.

Zootechnical Performance, Protease Activity and Proximate Composition of Nile Tilapia Fed Diets Containing Fish Silage Produced from Fish Waste

The present study was carried out to evaluate the impact of fish silage (FS) on the growth performances, protease enzyme activity and muscle compositions of Nile tilapia. In this regard, FS was produced from the waste parts of carp, pangus and tilapia and five iso-nitrogenous (containing 35% crude protein) diets were formulated in which fishmeal (FM) was used as the primary protein source in the control diet (0% FS, T1). The remaining four diets were formulated by replacing 25% (T2), 50% (T3), 75% (T4), and 100% (T5) FM protein with the FS. These diets were fed to tilapia at 8-6% of their body weight rearing them in glass tanks at the density of 15 fish/tank in triplicates. After fifty-days feeding trial, survival (%) of fish remained unaffected among the dietary treatments. Tilapia fed with 75% FS based diet showed improved growth and lower FCR, whereas those fed a diet with 100% FS exhibited lower growth rates. Notably, protease enzyme activity (mg/ml/min) increased with higher levels of FS inclusion. Increased crude protein content was observed in the fish fed the 75% FS diet. These findings underscore the potential of including FS up to 75% to enhance the growth performance of Nile tilapia.

EVALUATING THE EFFICACY OF CITRONELLA ESSENTIAL OIL (Cymbopogon nardus) AS A CONTROL AGENT FOR WAREHOUSE RICE WEEVIL (Sitophilus oryzae)

Sitophilus oryzae or rice weevil is a primary pest of rice that is very detrimental. Pest control that is usually carried out is fumigation using phosphine gas and fumigation using methyl bromide. The use of insecticides has several negative impacts on humans and the environment, so it is necessary to control pests naturally, namely using citronella essential oil. Citronella essential oil contains high levels of citronella and geraniol compounds and these compounds are contact toxic and antifeedant against insects. This research aims to determine the effect of citronella essential oil on mortality using the fumigation method and the response of rice lice to citronella essential oil in the flourdisc bioassay test. This research was carried out at the insect pest control and biodetriosation and formulation laboratory, using a completely randomized plan. The results showed that citronella oil was classified as effective in controlling the population of S. oryzae with a mortality of 41% using fumigation method and had anti-feedant properties compared to the control in the flour disk assay test. In the flourdisc bioassay method, the percentage of 2 gr/L influences the low relative growth rate, relative consumption rate and conversion efficiency of consumed food and the food prevention index continues to increase. Citronella essential oil has potential and effectiveness as a control for the warehouse pest rice weevil (Sitophilus oryzae).

Formation Characteristics of Pt-Ni Alloy Nanoparticles Fabricated by Nanolamination of Atomic Layer Deposition in Hydrogen.

Forced-flow atomic layer deposition nanolamination is employed to fabricate Pt-Ni nanoparticles on XC-72, with the compositions ranging from Pt94Ni6 to Pt67Ni33. Hydrogen is used as a co-reactant for depositing Pt and Ni. The growth rate of Pt is slower than that using oxygen reactant, and the growth exhibits preferred orientation along the (111) plane. Ni shows much slower growth rate than Pt, and it is only selectively deposited on Pt, not on the substrate. Higher ratios of Ni would hinder subsequent stacking of Pt atoms, resulting in lower overall growth rate and smaller particles (1.3-2.1nm). Alloying of Pt with Ni causes shifted lattice that leads to larger lattice parameter and d-spacing as Ni fraction increases. From the electronic state analysis, Pt 4f peaks are shifted to lower binding energies with increasing the Ni content, suggesting charge transfer from Ni to Pt. Schematic of the growth behavior is proposed. Most of the alloy nanoparticles exhibit higher electrochemical surface area and oxygen reduction reaction activity than those of commercial Pt. Especially, Pt83Ni17 and Pt87Ni13 show excellent mass activities of 0.76 and 0.59AmgPt -1, respectively, higher than the DOE target of 2025, 0.44AmgPt -1.

Thirty years of stasis in the dynamics of the Knysna Afro‐montane forest, South Africa

AbstractWe analysed nearly 31 years (1991–2022) of tree population dynamics in 108 permanent plots each 0.04 ha of the Lilyvlei Nature Reserve, a section of the Knysna Forest in South Africa which has not historically been disturbed by harvesting. The Knysna Forest is the only large piece of forest in South Africa and is marginal for tall forest, having low mean annual rainfall of only about 1000 mm and occurs on nutrient poor soils. In contrast to many studies of other forests globally, we found almost no change in overall biomass. Even at the scale of our small plots and on 10–30 year time scales, there has been little change. The forest has very low recruitment and mortality rates and thus low growth rates. Climatic changes too were minimal over this 30‐year period. The proportion of stems that died per size class was concentrated in the larger size‐classes per species, even for shorter species. This suggests that senescence rather than external disturbances determines the low mortality and thus the low dynamism and the high biomass (approx. 600 Mg ha−1AGB or 41 m2 ha−1 basal area) of the forest. Mortality of some species exceeded conspecific recruitment, a trend accompanied by non‐significant declines in biomass. However, these trends are not significant. In conclusion, neither composition nor biomass has changed significantly in these forests over a period of 30 years. This suggests that not all Southern Hemisphere forests are in a state of decline.

Investigation of the growth rate on optical and crystal quality of InGaAs/AlGaAs multi-quantum wells and InGaAs single layer grown by molecular beam epitaxy (MBE)

The impact of growth rate on the optical and crystal quality of InGaAs/AlGaAs multi-quantum wells (MQWs) and InGaAs single layer grown by molecular beam epitaxy (MBE) is studied. Photoluminescence (PL) and high-resolution X-ray diffraction (HRXRD) are applied for evaluation of the optical, crystal quality and interfaces smoothness. The room-temperature PL integral intensity increases by 220 % when the growth rate decreases from 2 to 1 Å/s. HRXRD analysis reveals the growth rate of 1 Å/s improves crystal and interface quality of MQWs, as well as significantly enhances PL intensity. But further reduce growth rate to 0.5 Å/s, the PL integral intensity decreases, instead. At lower growth rate, more impurities can incorporate into InGaN layer and act as nonradiative recombination centers. Growth rate can effectively control crystal quality, interfaces smoothness and impurity content and thus determine the optical quality of InGaAs/AlGaAs MQWs.

Effect of Stocking Density on the Growth of the Endangered Amazonian Fish Hypancistrus zebra (Siluriformes: Loricariidae)

ABSTRACTStocking density has a significant influence on animal homeostasis, and so is a crucial factor in the management of organisms in captivity and an important role in ex situ conservation of endangered species. Hypancistrus zebra is an endemic fish species from the Xingu River, Brazil—considered Critically Endangered since the early 2000s due to fishing pressure and, more recently, due to habitat changes resulting from the construction of the Belo Monte Hydroelectric Dam. The implementation of appropriate management in captivity is of utmost importance for its conservation, particularly in enhancing ex situ breeding techniques. This study aimed to evaluate the growth of juvenile H. zebra in aquaria with three different stocking density levels. The juveniles were distributed between three treatments, each with three replicates. We found no correlation between biomass and aquarium volume. The highest correlation coefficients were found between growth rates and densities related to the number of individuals per shelter area. Mortality rate was directly related to the initial number of fish in the aquariums, with larger populations showing higher mortality rates. The treatment with lower stocking density displayed the highest growth rate, while the treatment with higher density had the lowest growth rate, with a 23.38% difference between them.

Influence of Mushroom Grown on Yam Peel, Palm chaff, Sawdust, and Oil Palm Empty Bunch as Poultry Feed Admixture for Broiler Chicks Growth Enhancer

This study explores the viability of utilizing mushrooms (Pleurotus ostreatus) grown on diverse organic wastes as an economical and nutrient-rich feed for poultry production. Hence, the objective of this paper was to investigate the effect of mushroom grown on yam peel, palm chaff, sawdust, and oil palm empty bunch as poultry feed admixture for broiler chicks’growth enhancer using appropriate standard methods with thirty (30) broiler chicks on three diets for six weeks: Mushroom Poultry Feed (MPF); Commercial Poultry Feed (CPF), and Mixed Feed (MPF + CPF) respectively. Data obtained show that MPF-fed chickens exhibited a lower growth rate than chickens fed with CPF and MPF + CPF, signifying relatively less efficient weight gain. However, no significant differences were observed among feeding treatments (p > 0.05). The digestibility of MPF, CPF, and MPF + CPF was 81.06%, 82.93%, and 85.86% respectively, suggesting the potential of mixed feed to provide superior nutrients for growth and energy. Regarding chicken meat composition, significant differences (p < 0.05) were found in proximate composition, vitamins, and minerals among various feed treatments, emphasizing their interplay. However, the feed type did not significantly impact vitamin content (p > 0.05), highlighting variations more attributable to vitamin types than feed treatments. These findings highlight the potential of valorizing organic waste through mushroom cultivation for sustainable and economically viable poultry feed production.

Growth and evolution of Ni-Ti-Si type G phase Ni16Ti6Si7 in Cu alloys

By changing the cooling rate and adding P element, the morphology of primary Ni16Ti6Si7 in hypereutectic Cu-Ni-Si-Ti alloy has been analyzed in detail, and its growth mechanism has been discussed. Increasing the cooling rate can enhance the nucleation and growth of the primary phase. However, excessive cooling rates may result in constitutional supercooling, leading to the primary phase exhibiting various shapes. During the growth process, the crystal will preferentially grow along the 〈100〉 direction, and eventually cause the {100} facets to degenerate into corners, while the {111} facets retain and forms the octahedral Ni16Ti6Si7 due to the lower growth rate. Meanwhile, when the external growth conditions are changed, such as adding P element, the relative growth rate of <1 0 0 > and 〈111〉 directions will be changed, and the {1 0 0} facets will eventually remain and form cubic Ni16Ti6Si7.

Transition in production and export potential of garlic in India

The present study analyzed the performance of production and export of Indian garlic based on secondary data collected from different governments departmental repositories and websites. Statistical techniques like mean, standard deviation, regression and CAGR was applied for analysis. Garlic held quantity share (29.68 %) of aggregate production of Indian spices. But in export front the share of quantity and value share of garlic estimated only 2.30 % and 1.21 % respectively of total spices export from the country. India ranked 2nd after China possessing 5.85% share of global production and growing with 9.93 % CAGR over last 15 years (2006-2020) which was 3.5 times higher than China. The major destinations for garlic export from India are Malaysia, Thailand, USA, Vietnam (South) and Nepal altogether constituted around 41 % value of average annual export. But out of these countries, negative trend in export was found in three countries makes India searching for new clients. The lower growth rate (CAGR) of productivity (1.91 %) of garlic compared to acreage (5.46 %) over three decades (1990-91 to 2020-21) harnesses for technological breakthrough. Two producing states of India viz., Madhya Pradesh and Rajasthan account around 78.34 % of national production. But in terms of productivity, Punjab (11.39 t/ha), Haryana (10.67 t/ha) and Madhya Pradesh (10.31 t/ha) led the country. Enhancement of productivity through technological development and adequate market infrastructures along with improvement in post harvest management of the crop particularly processing might be given importance to increase production and export potential of garlic.

Activated sludge microbial community assembly: the role of influent microbial community immigration.

Wastewater treatment plants (WWTPs) are host to diverse microbial communities and receive a constant influx of microbes from influent wastewater. However, the impact of immigrants on the structure and activities of the activated sludge (AS) microbial community remains unclear. To gain insight on this phenomenon known as perpetual community coalescence, the current study utilized controlled manipulative experiments that decoupled the influent wastewater composition from the microbial populations to reveal the fundamental mechanisms involved in immigration between sewers and AS-WWTP. The immigration dynamics of heterotrophs were analyzed by harvesting wastewater biomass solids from three different sewer systems and adding to synthetic wastewater. Immigrating influent populations were observed to contribute up to 14% of the sequencing reads in the AS. By modeling the net growth rate of taxa, it was revealed that immigrants primarily exhibited low or negative net growth rates. By developing a protocol to reproducibly grow AS-WWTP communities in the lab, we have laid down the foundational principles for the testing of operational factors creating community variations with low noise and appropriate replication. Understanding the processes that drive microbial community diversity and assembly is a key question in microbial ecology. In the future, this knowledge can be used to manipulate the structure of microbial communities and improve system performance in WWTPs.IMPORTANCEIn biological wastewater treatment processes, the microbial community composition is essential in the performance and stability of the system. This study developed a reproducible protocol to investigate the impact of influent immigration (or perpetual coalescence of the sewer and activated sludge communities) with appropriate reproducibility and controls, allowing intrinsic definitions of core and immigrant populations to be established. The method developed herein will allow sequential manipulative experiments to be performed to test specific hypothesis and optimize wastewater treatment processes to meet new treatment goals.

Elevated Tropical Sea Surface Temperatures During the Globally Warm Miocene Caused Heat Stress for Caribbean Coral Reefs

ABSTRACTThe warm Miocene (23.0–5.3 Ma) is considered a model case for the global climate of the near future. In view of the current coral reef crisis, studies on Miocene reefs can contribute to predictions regarding the stress resilience of today's reefs against global warming. A Late Miocene (6.2–5.5 Ma) reef coral fauna from Hispaniola Island (Caribbean) characterised by ecologically tolerant taxa was originally interpreted to reflect cool‐eutrophic waters. However, the associated planktonic foraminifer assemblage and new TEX86H–based temperature reconstructions document an oligotrophic shallow‐water environment harbouring 30–31°C. Thus, in conjunction with unusually low vertical growth rates and erratic trace element signatures of massive reef corals, the coral fauna documents critically high temperatures and a response to heat stress rather than cool upwelling. The findings demonstrate the relevance of understanding shallow‐water ecosystems from past warm periods for developing scenarios of a future, warmer world.

An Analysis of the Patterns of Economic Growth in the US

ABSTRACT This article seeks to investigate which demand component led and shaped the growth patterns of the US economy between 1954 and 2020 and comprehensive sub-periods relying on a proper allocation of imports. In doing so, it aims to establish whether the external sector can make a positive contribution to growth even in a context of negative net exports. Finally, it seeks to shed light on the reasons for higher or lower output growth, drawing particular attention to the engines of growth in each historical period. This article takes a novel approach in two ways: (1) it calculates and analyzes the decomposition of the contributions to growth for the US; (2) it divides the analysis into sub-periods and engines of growth, separately analyzing movements in the components of the multiplier, the dynamics of each component’s share with respect to GDP, and their respective growth rates. The empirical results show that the very low growth rates experienced between 2008 and 2020 are mainly explained by a minimal contribution of the government sector accompanied by weak demand from the private sector, highlighting the importance of growth-oriented public policies. These negative results have been only partially compensated by improvements in the external sector.

Materials for improved lifetime of saggar in production of Li‐ion cathode powders

AbstractCeramic saggars of mullite‐cordierite are currently used to produce cathode powders for lithium‐ion batteries. Strong interactions occur between the LiNi0.8Mn0.1Co0.1O2 (NMC) precursor in the temperature range of calcination (750–1000°C) leading to corrosion and formation of cracks in the saggar. The frequent failure of saggar causes a lot of waste, which could be reduced by choosing corrosion‐resistant materials. To understand the corrosion mechanism in the system MgO–Al2O3–SiO2, the materials MgO, Al2O3, MgAl2O4, and SiC (instead of SiO2) were embedded in premixed NMC precursor and calcined at T = 780°C for 50, 100, 150 and 200 h. The formed phases were determined by phase and microstructure analysis. Finally, the formation of LiAlO2 and Li5AlO4 is associated with a lower growth rate of the corrosion layer compared with Li4SiO4, while MgO is inert. The reactivity with NMC can be ordered as follows: SiO2 &gt; Al2O3 &gt; MgO.

Features of the Microalgae and Cyanobacteria Growth in the Flue Gas Atmosphere with Different CO2 Concentrations

Nowadays, it is important to create the optimal technology for the absorption of flue gases with high CO2 content. In this regard, the aim of the investigation is to study the five different microalgae strains (Chlorella vulgaris, Chlorella ellipsoidea, Elliptochoris subsphaerica, Gloeotila pulchra, and Arthrospira platensis) under the influence of flue gases. The cultivation of microalgae was carried out in the atmosphere of flue gases with a gas flow rate of approximately 1 L·min−1 at high CO2 concentrations (3, 6, or 8%—from lower to higher concentrations), under continuous (24 h·d−1) illumination intensity of 200 µmol quanta·m−2·s−1 and a constant temperature of 27 ± 1 °C. The duration of the experiments was 12 days. Chlorella vulgaris and Chlorella ellipsoidea demonstrated the highest biomass growth rate at CO2 = 6% (0.79 and 0.74 g·L−1·d−1, respectively). The lowest growth rate (0.21 g·L−1·d−1) was achieved for Arthrospira platensis at CO2 = 3 and 6%. There was no significant drop in pH in the entire series of experiments. The results of microscopy showed a lack or a minimal number of dead cells in the strains under selected conditions. The obtained results can be used for further development of CO2 capture and storage technologies.

Mediterranean Marine Mammals: Possible Future Trends and Threats Due to Mercury Contamination and Interaction with Other Environmental Stressors.

Despite decreasing anthropogenic mercury (Hg) emissions in Europe and the banning and restriction of many persistent organic pollutants (POPs) under the Stockholm Convention, Mediterranean marine mammals still have one of the highest body burdens of persistent pollutants in the world. Moreover, the Mediterranean basin is one of the most sensitive to climate change, with likely changes in the biogeochemical cycle and bioavailability of Hg, primary productivity, and the length and composition of pelagic food webs. The availability of food resources for marine mammals is also affected by widespread overfishing and the increasing number of alien species colonizing the basin. After reporting the most recent findings on the biogeochemical cycle of Hg in the Mediterranean Sea and the physico-chemical and bio-ecological factors determining its exceptional bioaccumulation in odontocetes, this review discusses possible future changes in the bioavailability of the metal. Recent ocean-atmosphere-land models predict that in mid-latitude seas, water warming (which in the Mediterranean is 20% faster than the global average) is likely to decrease the solubility of Hg and favor the escape of the metal to the atmosphere. However, the basin has been affected for thousands of years by natural and anthropogenic inputs of metals and climate change with sea level rise (3.6 ± 0.3 mm year-1 in the last two decades), and the frequency of extreme weather events will likely remobilize a large amount of legacy Hg from soils, riverine, and coastal sediments. Moreover, possible changes in pelagic food webs and food availability could determine dietary shifts and lower growth rates in Mediterranean cetaceans, increasing their Hg body burden. Although, in adulthood, many marine mammals have evolved the ability to detoxify monomethylmercury (MMHg) and store the metal in the liver and other organs as insoluble HgSe crystals, in Mediterranean populations more exposed to the metal, this process can deplete the biological pool of Se, increasing their susceptibility to infectious diseases and autoimmune disorders. Mediterranean mammals are also among the most exposed in the world to legacy POPs, micro- and nanoplastics, and contaminants of emerging interest. Concomitant exposure to these synthetic chemicals may pose a much more serious threat than the Se depletion. Unfortunately, as shown by the literature data summarized in this review, the most exposed populations are those living in the NW basin, the main feeding and reproductive area for most Mediterranean cetaceans, declared a sanctuary for their protection since 2002. Thus, while emphasizing the adoption of all available approaches to mitigate anthropogenic pressure with fishing and maritime traffic, it is recommended to direct future research efforts towards the assessment of possible biological effects, at the individual and population levels, of chronic and simultaneous exposure to Hg, legacy POPs, contaminants of emerging interest, and microplastics.

Genome-wide association studies reveal the genetic basis of growth and carcass traits in Sichuan Shelduck

China has abundant local duck resource populations, and evaluating the characteristics of these breeds will help improve development and utilization. In this study, we conducted the first investigations of growth and slaughter performance on Sichuan Shelduck (n = 240), an endangered duck local breed. The average body weight is 1497.91g at 90 days of age. According to the growth curve through data recorded every 2 weeks, we observed a low relative growth rate (RGR) for the early growth stage. The RGR shows a decreasing trend with age increasing in the stage from 0 to 56 days of age. The SNP-based heritability estimation showed the growth rate has a relatively high heritability, indicating high genetic stability for this trait. In the correlation analysis, the percentage of leg muscle is positively correlated with the absolute growth rate (AGR) at 28-42 days of age, whereas it is negatively correlated with the earlier stages, exhibiting a time-specific correlation result. Additionally, genome-wide association studies (GWAS) identified PCSK6, TOX2, and TOMM7 as potential candidate genes influencing AGR (42-56) and AGR (56-90), while the candidate genes of slaughter traits were PTP4A2, FAM110B, TOX, UBXN2B, and FCHSD2. These results provide an important reference for further understanding the genetic basis of growth and meat production performance of Sichuan Shelduck.

Effect of micron/nano Nb particles on high-temperature oxidation behavior of TiAl alloy/thermal barrier coating system

In this study, the effect of NiCoCrAlY bond coating modified by micron- and nano-sized Nb particles on the oxidation behavior of a TiAl alloy/thermal barrier coating (TBC) system was investigated. The results show that the addition of micron-sized Nb particles slightly decreased the oxidation resistance of the TNM/TBC system, while the addition of nano-sized Nb particles significantly increased the oxidation resistance. The growth stress from the oxidation of micron-sized Nb particles and the Kirkendall effect lead to localized thickening (tumor effect) of the thermally grown oxide (TGO). Severe internal oxidation occurs in the bond coating modified by micron-sized Nb particles, greatly reducing the mechanical properties and antioxidant properties of the TNM/TBC system. However, these micron-sized Nb particles are deposited at the bond coating/TiAl matrix interface, acting as an in-situ diffusion barrier and partially hindering element interdiffusion. Conversely, nano-sized Nb particles induce the formation of fine columnar crystals in the TGO and promote the external diffusion of Al elements, thereby maintaining a low growth rate and excellent continuity of the TGO. Additionally, the Nb element dissolves into the matrix phase, and the formation of nano Nb-Al₂O₃ core-shell structures effectively improves the deformation resistance and failure resistance of the bond coating.

Exploring Aeration Strategies for Enhanced Simultaneous Nitrification and Denitrification in Membrane Aerated Bioreactors: A Computational Approach.

In this study we employ computational methods to investigate the influence of aeration strategies on simultaneous nitrification-denitrification processes. Specifically, we explore the impact of periodic and intermittent aeration on denitrification rates, which typically lag behind nitrification rates under identical environmental conditions. A two-dimensional deterministic multi-scale model is employed to elucidate the fundamental processes governing the behavior of membrane aerated biofilm reactors (MABRs). We aim to identify key factors that promote denitrification under varying aeration strategies. Our findings indicate that the concentration of oxygen during the off phase and the duration of the off interval play crucial roles in controlling denitrification. Complete discontinuation of oxygen is not advisable, as it inhibits the formation of anaerobic heterotrophic bacteria, thereby impeding denitrification. Extending the length of the off interval, however, enhances denitrification. Furthermore, we demonstrate that the initial inoculation of the substratum (membrane in this study) influences substrate degradation under periodic aeration, with implications for both nitrification and denitrification. Comparison between continuous and periodic/intermittent aeration scenarios reveals that the latter can extend the operational cycle of MABRs. This extension is attributed to relatively low biofilm growth rates associated with non-continuous aeration strategies. Consequently, our study provides a comprehensive understanding of the intricate interplay between aeration strategies and simultaneous nitrification-denitrification in MABRs. The insights presented herein can contribute significantly to the optimization of MABR performance in wastewater treatment applications.