Low Energy Research Articles

Calculated Aqueous Reduction Potentials of Neutral and Anionic Halogen Diatomic Molecules.

The free energy of hydration, aqueous, and gas phase electron affinity and aqueous reduction potentials of F2, Cl2, Br2, I2, ClF, BrF, IF, BrCl, ICl, IBr, and their corresponding anions were calculated using an electronic structure approach previously developed for these properties for X• and XO•, where X is a halogen which yielded excellent results. The gas phase electron affinities were calculated at the Feller-Peterson-Dixon level based on complete basis set extrapolation of CCSD(T) results with additional corrections. The agreement with the available experimental data is excellent, and the calculations provide a complete set of reliable electron affinities for these diatomic halogens. The hybrid solvation approach uses single point implicit solvation calculations on gas phase optimized clusters with explicit solvent molecules. The gas phase energy calculations were performed using MP2 and CCSD(T)-F12b for tetramer clusters (four explicit waters) and MP2 for octamer clusters (eight explicit waters). The final redox potentials were obtained at the MP2/aug-cc-pVTZ (aT) with a self-consistent reaction field (SMD) level using the octamer clusters. The aqueous reduction potentials of the neutral diatomic halogens are predicted within 0.06 V of the experiment for diatomic neutrals. The same agreement of 0.06 V is predicted for the redox potential resulting from dissociation electron attachment of the diatomic halogen anions. The current work extends reduction potentials for multiple redox couples for which no experimental data is available, for example, those containing iodine and the interhalogen anions. F2•- is predicted to dissociate for its lowest energy structure in both the tetramer and octamer clusters to form solvated F-, HF, and OH•.

Efficient and stability electrochemical degradation of Bisphenol A on Ti/TiO2-NTA/PbO2-Nd anode: Mechanistic analysis

The Ti/TiO2-NTA/PbO2-Nd electrodes were fabricated using anodic oxidation and electrodeposition techniques for the electrocatalytic treatment of bisphenol A (BPA) pollutants in coking wastewater. Characterization revealed well-organized TiO2 nanotube arrays (TiO2-NTA) with a hollow structure, featuring a wall thickness of 36 nm and an inner diameter of approximately 83 nm. The TiO2-NTA interlayer restricted PbO2 growth, leading to a compact crystal structure and increased electrode surface area. Electrochemical tests showed that the Ti/TiO2-NTA/PbO2-Nd electrode outperformed Ti/TiO2-NTA/PbO2 and Ti/PbO2 electrodes, exhibiting the highest oxygen evolution potential, lowest charge transfer resistance, optimal hydroxyl radical generation, and longest service lifetime. The removal efficiencies for BPA were 95.4 % for Ti/TiO2-NTA/PbO2-Nd, 90.8 % for Ti/TiO2-NTA/PbO2, and 80.6 % for Ti/PbO2. The Ti/TiO2-NTA/PbO2-Nd electrode also achieved the lowest energy consumption at 0.157 kWh/(g·COD), a 40 % reduction compared to Ti/PbO2. The introduction of TiO2-NTA enhanced electrode stability, electron transfer, and surface area, while neodymium (Nd) doping improved oxygen evolution potential and hydroxyl radical production. Under optimized conditions, the Ti/TiO2-NTA/PbO2-Nd electrode achieved BPA removal efficiencies of 99.24 %, COD removal efficiencies of 82.77 %, and TOC removal efficiencies of 78.92 %. UV–Vis spectrophotometry, three-dimensional excitation-emission matrix fluorescence spectra (3D EEM), and gas chromatography–mass spectrometry (GC–MS) analyses revealed potential BPA degradation pathways.

Role of Surface Tension on Heat Feedback and Power from Energetic Composites.

Heat feedback to the unburned reaction interface is an important controlling factor of the velocity of the reaction front and power delivery. In this paper, we investigate the effect of agglomerate surface tension and its relationship to surface residence time and heat feedback on the combustion characteristics by Si addition to an Al/KClO4 composite. Macroscopic imaging demonstrates a significant increase in burn rate with the addition of Si despite the fact that Si/KClO4 has a slightly lower energy density than Al/KClO4. Microscopic imaging coupled with three-color pyrometry reveals that molten liquid forms and evolves into spherical droplets on the burning surface, which are subsequently ejected from the surface. We find that the addition of Si results in a small increase in droplet size and a negligible impact on droplet temperature. However, the droplet formation rate on the surface is slower, leading to a significantly longer surface residence time. This leads to enhanced conductive heat feedback to the unburnt materials, thereby increasing the burn rate and energy release rate. We attribute the decreased droplet growth rate to the lowered surface tension of the liquid mixture with Si addition. This study highlights the crucial role of agglomerate physical property (e.g., surface tension) in influencing the combustion behavior of energetic composites.

Native Defects Hybridization and Electronic Transport in Cu2Se‐CuGaSe2 Hierarchical Composites

AbstractEngineering the energy distribution of electronic defects in semiconductors can afford the coexistence of degenerate and nondegenerate transport behavior. By leveraging native defects in Cu2Se and CuGaSe2 phases, the tunability of the concentration and energy distribution of active electronic defects in hierarchical (1‐x)Cu2Se‐(x)CuGaSe2 composites is demonstrated. This study found that the electrical conductivity of various composites decreases with rising temperature indicating degenerate semiconducting behavior, whereas the carrier density increases with temperature, which is consistent with non‐degenerate semiconductivity. Remarkably, this study found that while the carrier density and electrical conductivity drop with the increasing CuGaSe2 content for samples with x ≤ 0.45 is consistent with an increase in the activation energy of “active” electronic defects, the sudden increase by 140% in the electrical conductivity and by 109% in the carrier density for near equimolar composition suggests the formation of a large density of electronic defects with lower activation energy. This unusual behavior is understood within the context of the hybridization of coexisting native electronic defects to form degenerate hybrid acceptor states with lower activation energy. The reported unique electronic transport can be leveraged for the development of more versatile electronic and optoelectronic devices with superior performance.

Carbon - 12C ion radiation-induced cell death and molecular mechanisms in malignant cells: Evidence from in vivo and in vitro

Conventional radiotherapy has been revolutionized for several decades. Recently, the delivery of high linear energy transfer (LET) radiation such as heavy carbon ion therapy has gained more attention. Among all low-energy therapies such as photon, X-ray, and gamma radiation therapy, 12C heavy carbon ion therapy is the best therapy for cancer treatment due to its high relative biological effectiveness (RBE). It has been studied that many tumors show resistance to chemotherapy and low energy transfer radiation. The unique nature of high LET shows unique Bragg peaks where very little radiation are applied on the tumor cells and better results can be achieved. It effectively kills the tumor cells without affecting the normal cells. There are some limitations to conventional radiotherapy. Radiotherapy with the low LET group may not work properly. Carbon ion radiation (CIR) induces malignant cell death in different modes, such as apoptosis, senescence, autophagy, immunogenic cell death and necrosis. Heavy carbon ion therapy enhances cell death by altering different molecular signalling pathways such as p53, AKT, MEK, caspase and STAT–3. Investigation of the major molecular cell death by carbon ion irradiation is very essential to understand the modalities of heavy carbon ion induced cell death. In this context, the investigation of different signaling cascades may open new horizons in cancer treatment. The therapeutic efficacy and application of heavy carbon ion beams along with some molecular inhibitors, radio sensitizers, and gene therapy would be helpful for future cancer treatment. Therefore, a more thorough investigation in this field is needed. The current review article highlights the recent advances in cancer therapy research based on Carbon 12C Ion radiation-induced cell death.

Cost-Related Drivers and Barriers of Passivhaus: A Systematic Literature Review

Passivhaus (PH) has gained global recognition for its energy-efficient features despite a 5% to 10% higher construction cost than traditional houses, especially within European countries. However, its adoption and popularity have not met the same fate in other countries like New Zealand. The higher upfront cost has been critical to the slow adoption of the PH movement in New Zealand. This study aimed to demystify the mist around the cost of PHs with a focus on the effects of drivers and barriers on their life cycle costs (LCCs). As such, a systematic literature review was conducted to provide a comprehensive understanding of the cost implications associated with PH. Using the preferred reporting items for systematic reviews and meta-analyses (PRISMA) review method, we examined 71 past studies on PHs from 2005 to 2023. We found that the drivers of PHs include reduced heating demand, increased thermal comfort, and indoor air quality (IAQ). Research showed that the rising market for PHs is fueled by climate change, environmental awareness, innovative materials and technologies, individual commitment, improved regulations, pilot studies, research efforts, and governmental funding and initiatives. However, PHs face significant challenges such as increased complexity, advanced technology, higher initial investments compared to conventional and low-energy houses, national requirements, overheating, difficulties in affording the technologies, and a lack of options in the market. Despite the wealth of research on the economic aspects of PH, there is a lack of in-depth studies exploring the LCC of PHs focusing on cost commitments and benefits. Such studies are essential for assessing and optimising the cost-effectiveness of PH, considering different climates and regions, and comparing them with other low energy standards. The findings of our review provide a crucial focus for PH stakeholders in assessing the long-term financial viability of PH projects, thereby improving decision-making and facilitating effective planning for sustainable and cost-effective housing.

In Situ Visual Observation of Surface Energy-Controlled Heterogeneous Nucleation of Metal Nanocrystals.

Electrochemical growth of metal nanocrystals is pivotal for material synthesis, processing, and resource recovery. Understanding the heterogeneous interface between electrolyte and electrode is crucial for nanocrystal nucleation, but the influence of this interaction is still poorly understood. This study employs advanced in situ measurements to investigate the heterogeneous nucleation of metals on solid surfaces. By observing the copper nanocrystal electrodeposition, an interphase interaction-induced nucleation mechanism highly dependent on substrate surface energy is uncovered. It shows that a high-energy (HE) electrode tended to form a polycrystalline structure, while a low-energy (LE) electrode induced a monocrystalline structure. Raman and electrochemical characterizations confirmed that HE interface enhances the interphase interaction, reducing the nucleation barrier for the sturdy nanostructures. This leads to a 30.92-52.21% reduction in the crystal layer thickness and a 19.18-31.78% increase in the charge transfer capability, promoting the formation of a uniform and compact film. The structural compactness of the early nucleated crystals enhances the deposit stability for long-duration electrodeposition. This research not only inspires comprehension of physicochemical processes correlated with heterogeneous nucleation, but also paves a new avenue for high-quality synthesis and efficient recovery of metallic nanomaterials.

Activity and product distribution in Ni-Co and Ni-Cu catalyst-mediated lignin depolymerization into phenolic substances with isopropanol H-donating solvent.

Lignin, a vital renewable biopolymer, serves as the Earth's primary source of aromatics and carbon. Its depolymerization presents significant potential for producing phenolic fine chemicals. This study assesses promoted Ni-based bimetallic catalysts (Ni-Co/C and Ni-Cu/C) supported on activated carbon in isopropanol for lignin depolymerization, compared to monometallic counterparts. BET, SEM, EDX, and XPS analyses highlight their physicochemical properties and promotional effects, enhancing hydrogenolysis activity and hydrogen transformation. Reaction parameter exploration elucidates the influence on lignin depolymerization, with cobalt and copper as promoters notably increasing conversion and monomer yield. Ni-Co/C exhibits the highest lignin conversion (94.2%) and maximum monomer yield (53.1 wt%) under specified conditions, with lower activation energy (36.1kJ/mol) and higher turnover frequency (31.6h-1) compared to Ni/C. FT-IR, GPC, GC-FID, and GC-MS analyses confirm effective depolymerization, identifying 20 monomer products. Proposed reaction mechanisms underscore the potential of Ni-based bimetallic catalysts for lignin valorization, offering insights into developing efficient catalytic systems for lignin hydrogenolysis. This research enhances understanding and facilitates the development of selective catalytic processes for lignin valorization.

Adjusting Interface Dynamics: A New Insight into the Role of Electrolyte Additive in Facilitating Highly Reversible (002)‐Textured Zinc Anode at High Current and Areal Densities

AbstractFacilitating (002)‐textured zinc growth is crucial for achieving dendrite‐free zinc deposition in zinc‐ion batteries. Electrolyte engineering holds promise in directing zinc electrodeposition toward this desired orientation. However, despite the (002) plane's lower surface energy compared to other facets, it remains unclear why this plane does not dominate zinc crystal faces during electrodeposition under normal conditions. This knowledge gap underscores the need to better understand zinc electrodeposition behaviors and the influence of electrolyte compositions on its crystallographic texture. This study explores different tetraazamacrocycle derivatives as electrolyte additives. It reveals that achieving (002)‐textured zinc deposition is not solely dictated by thermodynamic equilibrium but also significantly influenced by interface dynamics. In typical ZnSO4 electrolytes, imbalanced kinetics among reduction, ion diffusion, and adatom diffusion processes lead to electroconvection and disorderly zinc accumulation, hindering proper zinc growth. In contrast, introducing specific tetraazamacrocycle derivative in the electrolyte regulates reduction rate, enhances limiting current density, and expedites adatom diffusion, mitigating hydrodynamic instability and dendrite growth. This regulation restores the thermodynamically favorable flat (002)‐textured zinc deposition, extending the zinc anode's lifespan to 1800 h at 5 mA cm−2 and 5 mAh cm−2, enabling the fabrication of a high‐performance zinc ion hybrid capacitor prototype capable of stable operation for 40 000 cycles.

Ion Dynamics in Nanocrystalline Li2S‐LiI – on the Influence of Local Disorder on Short‐Range Hopping and Long‐Range Ion Transport

The enormous interest in developing powerful Li‐based batteries leads to a boost in materials research. Though Li–sulfur batteries offer very high energy densities, the nature of Li‐ion dynamics in the final discharge product has not been fully understood yet. While nanocrystalline shows enhanced ion dynamics compared to its coarse‐grained counterpart, the interaction of with another binary such as LiI seems to be rather unexplored. Herein, an equimolar mixture of and LiI is treated in a high‐energy ball mill, and both the overall and local structural changes are studied by X‐ray powder diffraction and nuclear magnetic resonance (NMR), respectively . Besides the formation of amorphous regions, evidences are found for the generation of anion‐mixed sites that give rise to facile Li exchange on the 2D exchange NMR timescale. Compared to a coarse‐grained reference sample, the overall (bulk) ionic conductivity of nanocrystalline ‐LiI increases by two orders of magnitude. Besides the anion‐mixing effect, this increase benefits from nanosize effects that include the formation of defect‐rich interfacial regions. NMR relaxation measurements fully support this result and reveal heterogeneous dynamics with lower activation energies for both the localized hopping processes and long‐range ion transport in nm‐sized ‐LiI.

Prediction of ADMET, molecular docking, DFT, and QSPR of potential phytoconstituents from Ambrosia maritima L. targeting xanthine oxidase

This study aimed to evaluate the xanthine oxidase (XO) inhibitory activities of seven compounds identified in the potent antioxidant ethyl acetate fraction of Ambrosia maritima L. using various computational tools. Physicochemical properties and density functional theory (DFT) analyses were performed. Subsequently, XO molecular docking was performed to identify the most promising leads. The water solubility of the compounds varied among highly soluble, moderately soluble, and soluble compounds. Four compounds were predicted to have no mutagenic or tumorigenic effect. All compounds were found to have lower binding energies than the oxypurinol standard, indicating their potential as XO inhibitors. The predicted inhibitory interactions, physicochemical properties, and DFT results suggest that two of the compounds (Kaempferol-3-O-glucoside and escululin) are promising drugs or drug leads for the treatment of certain diseases related to increased levels of XO.

Optimization of the Operating Voltage of Cobalt-Free Nickel-in-Medium Cathodes for High-Performance Lithium-Ion Batteries

Medium-nickel cobalt-free cathode materials have attracted much attention in recent years for their low cost and high energy density. However, the structural stability of nickel-based cathode materials becomes compromised when accompanied by the increasing of voltage, leading to poor cycling performance and, thus, hindering their widespread industrial application. In this work, we investigated the optimal charge cut-off voltage for the nickel-based cathode material LiNi0.6Mn0.4O2 (NM64). Within the voltage range of 3.0 to 4.5 V, the electrode energy density reached 784.08 Wh/kg, with an initial Coulombic efficiency of 84.49%. The reversible specific capacity at 0.1 C reached 197.84 mAh/g, and it still maintained a high reversible specific capacity of nearly 150 mAh/g, with a capacity retention rate of 86% after 150 cycles at 1 C. Furthermore, NM64 exhibited an intact morphological structure without noticeable cracking after 150 cycles, indicating excellent structural stability. This study emphasizes the relationship between the stability of NM64 cathodes and different operating voltage ranges, thereby promoting the development of high-voltage layered nickel-based cathode materials.

Preparation and mechanism research on hydrophobic coupling modification of HTV silicone rubber

Neat high-temperature vulcanized silicone rubber (HTV SR) showed bad hydrophobicity due to the existence of a large number of inorganic reinforcing fillers on its surface, which affected its security application in outdoor insulation systems. In this work, hydrophobic silane chains were grafted onto the surface of inorganic particles on the skin layer of HTV SR by a one-step coupling modification to improve its hydrophobicity. The effects of coupling agent types and coupling reaction conditions on the hydrophobicity of HTV SR were investigated. It was determined that the perfluorooctane trichlorosilicon with a large number of low surface energy fluorine atoms was the preferred coupling agent. The contact angle of HTV SR was increased by 15.70% when the optimal coupling reaction conditions were determined to be a reaction temperature of 60°C, a reaction time of 4 h, and an amount of coupling agent of 0.5%. The study found that both etching reaction and grafting reaction occurred during the whole coupling modification process, which led to the disappearance or decrease of a lot of holes on the HTV SR surface. After the fluorination coupling reaction, the surface of HTV SR became smooth and dense that led to the decrease of water absorption. The result of Fourier-transform infrared spectroscopy analysis showed the formation of C-F bond in HTV SR after fluorination modification, and the energetic dispersive spectroscopy analysis showed that the fluorine content on the surface of the fluorinated HTV SR increased significantly. Moreover, the stability analysis showed that the fluorinated HTV SR still had a good thermal stability and mechanical property stability.

Giant dielectric ceramic of Li0.3Ti0.02Ni0.68O with abundant oxygen vacancies enabling high lithium-ion conductivity in composite solid-state electrolyte

The low ionic conductivity of composite solid-state electrolytes due to the lack of free Li-ions and Li dendrite growth induced by the low transference number seriously hinder their application. Herein, we find that the giant dielectric ceramic of Li0.3Ti0.02Ni0.68O (LTNO) with ultra-high dielectric constant can greatly promote the dissociation of Li salt to generate abundant movable Li-ions and realize a high room-temperature ionic conductivity (4.09 × 10–4 S cm−1) as well as a low activation energy (0.16 eV). The oxygen vacancies on the surface of LTNO can effectively immobilize the anions to achieve a high Li transference number (0.61). Furthermore, the enhanced dielectric properties of the composite electrolyte induce homogenous Li plating/stripping to suppress the growth of Li dendrites. As a result, the Li||Li symmetric cells exhibit long lifespan of 2400 h and 1150 h at 0.1 mA cm−2 and 0.2 mA cm−2, respectively. The Li||LiNi0.8Co0.1Mn0.1O2 solid-state full cells show a high capacity retention of 83% after 430 cycles at 2C. This work highlights the critical role of high dielectric property and oxygen defects of fillers in composite solid-state electrolytes, and provides a demonstration for the application of giant dielectric materials in solid-state Li metal batteries.

Coordination Environment and Distance Optimization of Dual Single Atoms on Fluorine-Doped Carbon Nanotubes for Chlorine Evolution Reaction.

The chlorine evolution reaction (CER) is a crucial anode reaction in the chlor-alkali industrial process. Precious metal-based dimensionally stable anodes (DSAs) are commonly used as catalysts for CER but are constrained by their high cost and low selectivity. Herein, a Pt dual singe-atom catalyst (DSAC) dispersed on fluorine-doped carbon nanotubes (F-CNTs) is designed for an efficient and robust CER process. The prepared Pt DSAC demonstrates excellent CER activity with a low overpotential of 21 mV to achieve a current density of 10 mA cm-2 and a remarkable mass activity of 3802.6 A gpt-1 at an overpotential around 30 mV, outperforming those of commercial DSA and Pt single-atom catalysts. The excellent CER performance of Pt DSAC is attributed to the high atomic utilization and improved intrinsic activity. Notably, introducing fluorine atoms on CNTs increases the oxidation and chlorination resistance of Pt DSAC, and reduces the demetalization ratio of Pt atoms, resulting in excellent long-term CER stability. Theoretical calculations reveal that several Pt DSAC configurations with optimized first-shell ligands and interatomic distance display lower energy barriers for Cl intermediates generation and weaker ionic Pt-Cl bond interaction, which are favorable for the CER process.

Unraveling the NH3-SCR-DeNOx Mechanism of Cu-SSZ-13 Variants by Spectroscopic and Transient Techniques.

Commercial SSZ-13 zeolite with different n(Si)/n(Al) ratios and from different suppliers were subjected to a post-synthetic treatment in order to create mesopores of up to 10 nm. Furthermore, the materials were modified with copper ions and thoroughly physico-chemically characterized. The modified textural properties varied the nature of copper species, and thus, activity in the selective catalytic reduction of NOx with ammonia (NH3-SCR-DeNOx). Pulsed-field gradient nuclear magnetic resonance (PFG-NMR) studies with hexane as probe liquid revealed improved intracrystalline diffusion for some Cu-containing SSZ-13 materials. The NH3-SCR-DeNOx pathway is verified viain situ DR UV-Vis, in situ FT-IR and EPR, temperature-programmed studies as well as SSITKA studies that provide a mechanistic understanding of the reaction. Kinetic modelling results demonstrate the highest NH3-SCR-DeNOx reaction rates and up to 20 % lower energy barriers with n(Si)/n(Al) ratio of 6.5 for all modified forms (i.e., (NH4)Cu-SSZ-13_6.5 and Cu-SSZ-13_6.5_NaOH/0.1) and cause only negligible parasitic ammonia oxidation. The modelling of the stop-flow experiments further demonstrates that the SCR pathway via the HONO surface intermediate is present but barely contributes to the overall NO conversion compared to the dominant path between adsorbed NH3 and NO from the gas phase.

Is the Presence of Sn2+ a Crucial Factor for the Generation of Low Thermal Conductivity in Tin-Based Sulfides?

Comprehending the relationship between crystal structures and transport properties is crucial to develop materials with improved electrical and thermal properties for thermoelectric applications. In this article, we report on the complex crystal structure and physical properties of Cr2Sn3S7, a n-type magnetic semiconductor with a low energy band gap and low thermal conductivity. Importantly, we demonstrate that the high level of structural complexity is related to the coexistence of two sublattices: a host lattice, [Cr4Sn2S11]2-, characterized by a mixed Sn4+/Cr3+ occupancy of its cationic sites, and a guest lattice characterized by [Sn4S3]2+ chains, containing Sn2+ cations only, closely related to the ones encountered in the orthorhombic SnS compound. By combining experiments including X-ray diffraction with ab initio calculations of electrons and phonons, we succeeded to elucidate the origin of the low thermal conductivity in Cr2Sn3S7. We demonstrate that the low dimensionality of the [Sn4S3]2+ chains, which generates weak Sn···S interactions with the 3D host lattice, is induced by the lone pair stereochemical activity of Sn2+. This lattice softening favors strong anisotropic vibrations at low frequencies, highlighting the primordial role played by Sn2+ cations in both crystal structure dimensionality and low thermal conductivity in tin-based sulfides.

One-Step Wet-Spinning of High-Energy Density Coaxial Fibrous Supercapacitors Based on In Situ Carbon-Modified Nitrogen-Doped MXene Nanosheets.

Fibrous supercapacitors (SCs) are emerging promising power sources for flexible/wearable electronics and have attracted an extensive amount of attention from researchers. However, the low energy density has always hindered their further development. Here, a coaxial fibrous SC (CFSC) was fabricated by one-step wet-spinning combined with an electrodeposition strategy. Benefiting from the large surface area and abundant pore structure of carbon-modified nitrogen-doped MXene nanosheets (NS), as well as the high conductivity of silver (Ag) NS, the electrolyte ion/electron transport paths are significantly improved. Furthermore, the distributed GO in the P(VDF-HFP) separator could form a high-speed continuous ion transport channel, thus enhancing the ionic conductivity. At a power density of 40-200 μW cm-2, the CFSC shows a high energy density of 0.7-3.39 μWh cm-2. The as-prepared CFSC also maintains an excellent capacitance retention rate of 90.3% even after 15 000 charge-discharge cycles. This work provides a general strategy for manufacturing high-performance, flexible, and wearable SCs.

Optimal allocation of wind power hybrid energy storage capacity based on ant colony optimization algorithm

Renewable energy sources, such as wind power, face challenges owing to their erratic construction and intermittent nature, leading to the emergence of energy storage strategies to achieve grid stability and reliable electricity supplies. Determination of the correct size of energy storage devices for wind power plants is complicated. In this study, the ant colony optimization (ACO) algorithm is proposed for the best distribution/sizing of wind-generated hybrid storage capacity. Ants’ foraging habits motivate the development of wind turbines with high dependability, high efficiency and low energy storage costs. A study is conducted to confirm the practicality of the proposed method, using real data from a wind power plant to calculate the contrast between wind energy production and load consumption features, to influence the appropriate quantity for energy storage organization. The study demonstrates that the ACO approach provides precise and efficient solutions for determining the optimal energy distribution in wind power plants.

Antibacterial and therapeutic effects of low energy shock waves on uropathogenic E. coli investigated by in vitro and in vivo cystitis rat model.

Low-energy shock waves (LESWs) are known to alter cell-membrane permeability. This study aimed to investigate the effect of LESWs on Escherichia coli and E. coli-induced cystitis in rats. Standardized suspensions of E. coli ATCC25922 were treated with or without LESWs (100 or 300 pulses; 0.12mJ/mm2; 2pulses/s) followed by bacterial counting, an antibiotic sensitivity test, and gene ontology analysis and gene-set enrichment analysis. Intravesical administration of saline or E. coli (0.5mL with 108CFU/mL) for 30min was performed in female Sprague-Dawley rats. The rats were treated with or without LESWs (300 pulses; 0.12mJ/mm2; 2pulses/s) on days 4 and 5. The changes in inflammatory reactions, uroplakin IIIa staining, and correlation with urodynamic findings were assessed on day 8. LESW treatment induced a decrease in CFU and the autoaggregation rate and increased the inhibition zone sizes in a cefazolin-sensitivity study. These changes were associated with gene expression in regulation of cellular membrane components, biofilm formation, and the ATP-binding cassette transporter pathway. E. coli induced bladder hyperactivity and an inflammatory reaction as well as decreased uroplakin IIIa staining; these effects were partially reversed by LESW treatment. The LESW antibacterial effect occurs by altering bacterial cell-membrane gene expression, enhancing antibiotic sensitivity, and inhibiting bladder inflammatory reaction and overactivity. These findings support the potential benefits of LESWs for treatment of recurrent or refractory bacterial cystitis.