Low Yield Research Articles

Cultivation Strategies to Modify Biomass Partitioning and Improve Yield in Controlled-environment Production of High-cannabidiol Cannabis (Cannabis sativa L.)

Two common challenges reported by cannabis growers are low yields and small profit margins. Although recent research of cannabis yield has focused on lighting and nutrition, little research has examined how changes in other cultivation practices may be beneficial. The objective of this study was to evaluate the following two techniques to potentially improve yield: fertilizer restriction (FR) to reduce plant size and, thus, increase plant density and shoot number manipulation (SNM) to reduce shoot length and improve biomass partitioning. The FR technique involves leaching the substrate and providing only tap water for 0, 1, or 2 weeks at the start of flower initiation, whereas SNM involves pinching shoot tips 2, 3, or 4 times to produce 4, 8, or 16 shoots/plant, respectively. This study used a full factorial treatment design for a total of nine treatments (three FR × three SNM). Plants were flowered under 12-hour photoperiods for 8 weeks and then destructively harvested for data collection. The results demonstrated that both techniques improve plant productivity in different ways. The FR technique reduced all mass measurements (g/plant) and decreased plant area (m2/plant); therefore, the yield metrics (kg·m−2) increased with the increasing FR treatments. The SNM technique did not affect plant area, but more pinching events resulted in a decrease in reproductive shoot length (cm/shoot) and an increase in inflorescence to trim the dry mass ratio (inflorescence:trim). Shorter shoot lengths are desirable for eliminating trellis support netting, which helps growers reduce material costs and improve labor efficiency during harvest. Increasing the inflorescence:trim may also reduce labor costs related to trimming, which comprise the largest cost of production by many growers. Although both techniques offer advantages, there are trade-offs that must be considered in the context of overall profitability.

The Impact of Nitrogen Levels on the Growth, Development, and Yield of Orange-fleshed Sweet Potatoes (Ipomoea batatas L.)

Nitrogen (N) is one of the most important fertilizers in agriculture because it promotes the growth of plants and the uptake of other plant nutrients. This nutrient plays a significant role in determining the yield and nutrient composition of sweet potato root tubers. Therefore, this study aimed to determine the optimum application rate of N in sweet potatoes to maximize yields and increase growth efficiency. Four levels of N (50, 100, 150, and 200 kg/ha) were applied as treatments. A randomized complete block design was used, and each treatment was replicated five times. Vine length, leaf length, stem thickness, and chlorophyll content were measured weekly, and the storage root yield was determined at the end of the experiment. The results showed a significant effect of the N treatments on plant growth, chlorophyll content, vine length, leaf area index and storage root yield. The chlorophyll content and vine length increased with an increase in the N rate. However, an inverse relationship was observed between storage root yield and N rates; the highest yield was recorded for the 50 kg/ha N treatment and the lowest yield was recorded for the 200 kg/ha N applied. Therefore, a rate of 50 to 100 kg/ha N is recommended for the production of orange-fleshed sweet potatoes.

Diagnostic Value and Safety of Addition of Transbronchial Needle Aspiration to Transbronchial Biopsy Through Endobronchial Ultrasonography Using a Guide Sheath Under Virtual Bronchoscopic Navigation for the Diagnosis of Peripheral Pulmonary Lesions.

The diagnostic yield of peripheral pulmonary lesions (PPLs) through endobronchial ultrasonography with a guide sheath transbronchial biopsy (EBUS-GS TBB) under virtual bronchoscopic navigation is unsatisfactory because radial EBUS probe is not always located within the lesion. Transbronchial needle aspiration with a guide sheath (GS-TBNA) has the potential to overcome the lower diagnostic yield by improving the relationship between the probe and the lesion and enabling repeated sampling while maintaining the location of a GS near the lesion. However, there are few data regarding the diagnostic yield and safety for diagnosing PPLs in this procedure. We retrospectively analyzed consecutive 363 lesions (83 lesions underwent GS-TBNA/EBUS-GS TBB and 280 lesions underwent EBUS-GS TBB) at our institution between April 1, 2019 and March 31, 2022. We investigated the diagnostic efficacy and complications of GS-TBNA/EBUS-GS TBB and compared them with those of EBUS-GS TBB. The lesion size, distance from the hilum, presence of bronchus leading to the lesion, and EBUS images during the examination differed significantly between the two procedures. Logistic regression analysis adjusted for these 4 covariates revealed that GS-TBNA/EBUS-GS TBB was a significant factor affecting the diagnostic success of PPLs compared with EBUS-GS TBB (odds ratio=2.43, 95% CI=1.16-5.07, P=0.018). Neither procedure differed significantly in terms of complications (6.0% vs. 5.7%, P>0.999). GS-TBNA performed in addition to EBUS-GS TBB might be a promising sampling method for improving the diagnostic yield for PPLs without increasing the incidence of complications.

Yield of Turmeric Varieties [Curcuma longa (L.)] Under Eucalyptus (Eucalyptus tereticornis) Based Agroforestry System in Chhattisgarh Plain, India

The experiment was conducted during the year 2022-23 and 2023-24 in Kharif seasons at the Herbal Garden of IGKV, Raipur, Chhattisgarh. Two production systems were studied: F1 involved sole Turmeric, while F2 involved Eucalyptus intercropped with Turmeric in both the production system used FRBD (Factorial Randomized Block Design). Eight turmeric varieties were used: T1 - Suranjana, T2 - Selam, T3 – Chhattisgarh Haldi-1, T4 – Chhattisgarh Haldi-2, T5 – Roma, T6- Ranga, T7- NDH-98 and T8- Sonali. The pooled rhizome fresh yield data for year 2022-23 and 2023-24 year shows that F2 (Eucalyptus + turmeric) (19.76 t/ha) yielded significantly less than F1 (Sole turmeric) (21.73 t/ha). Among varieties, Chhattisgarh Haldi-2 (25.18 t/ha) and NDH-98 (24.65 t/ha) recorded the maximum yield, while the lowest yield was recorded in Sonali (16 t/ha). A significant result found in production system and crop variety which showed that performance of varieties depended on the cropping system.

Engineering peripheral S-doped atomic Fe-N4 in defect-rich porous carbon nanoshells for durable oxygen reduction reaction and Zn-air batteries

Iron-nitrogen-carbon (Fe-N-C) single-atom materials have emerged as the most promising catalysts for the oxygen reduction reaction (ORR), which yet suffers from inadequate stability arising from the attack of ·OH and HO2· radicals generated by H2O2. In this study, density functional theory (DFT) calculations reveal that the presence of peripheral S atoms can regulate the electronic structure of the Fe center and suppress the formation of H2O2 to enhance the catalyst's durability. Thereafter, atomic Fe-N4 with peripheral S doping is intricately engineered in defect-rich porous carbon nanoshells (Fe-NS-C) through an adsorption-pyrolysis method. The incorporation of S not only optimizes the coordination microenvironment of Fe-N4 but also induces a larger specific surface area and richer defects. The Fe-NS-C catalyst displays remarkable ORR performance, featuring a half-wave potential (E1/2) of 0.90 V. Its low H2O2 yield (below 1.1 %) and excellent stability (10 mV day in E1/2 after 10,000 cycles) further underscore the superiority of Fe-NS-C. When employed as the cathode for Zn-air battery, Fe-NS-C achieves an impressive peak power density of 230.1 mW cm−2 and stable charge/discharge potentials over an extended duration of 150 h. This study presents an effective strategy for engineering efficient and durable single-atom electrocatalysts for ORR and Zn-air batteries.

Synthesis, antimicrobial activity, and mechanistic studies of enterocin DD14, a leaderless two-peptide bacteriocin

Bacteriocins are promising alternatives to antibiotics in the food, veterinary and medical sectors, but their study and use is often hampered by the low yields and high costs associated with their purification from naturally occurring bacteria. Chemical synthesis has emerged as a means to overcome this limitation and design more active variants. In this study, microwave-assisted solid-phase peptide synthesis was used to produce the leaderless two-peptide bacteriocin enterocin DD14 (EntDD14), composed of EntDD14A (44 amino acids) and EntDD14B (43 amino acids). The resulting synthetic peptides, syn-EntDD14A and syn-EntDD14B, were tested against Gram-positive bacteria including Listeria, Staphylococcus and Enterococcus strains. Both peptides were found to be necessary for optimal, but not synergistic, antibacterial activity and to act through a pore-forming mechanism. Both peptides exhibited moderate cytotoxicity against eukaryotic cells.

An innovative biphasic reaction system for highly selective benzene hydroxylation based on photocatalytic polymer composites

The hydroxylation of benzene to phenol in presence of hydrogen peroxide was performed using a new biphasic system consisting of a solid phase, a photocatalytically active monolithic polymer composite, immersed in an aqueous phase in which H2O2 is dissolved. In detail, ZnO photocatalytic particles were embedded into the hydrophobic syndiotactic polystyrene (sPS) polymer. Zinc oxide nanostructures (ZnO NSs) were synthesized by an electrochemical procedure. The surface morphology and structure of ZnO nanoparticles and ZnO‐sPS monolithic aerogel composite (ZnO/sPS) were investigated by scanning electron microscopy, X‐ray diffraction and X‐ray photoelectron spectroscopy analysis. Photocatalytic results evidenced that, under UV irradiation, both ZnO NSs and biphasic system water‐photocatalytic composites had a high benzene oxidative property but with very low phenol yield (<2%) at pH=7. To enhance the phenol selective formation, the pH of aqueous solution surrounding the photocatalytic polymer composite was modified. A phenol yield of about 94% and benzene conversion higher than 99% was obtained in alkaline conditions (pH=11).

Advancements in breeding for high oil content in maize (Zea mays. L)

Maize is one of the world’s most important food crops, supplying>5% deity energy. Due to its wider adaptability, high yield potential, maize is widely utilized as food and animals world worldwide. It enriched with caloric starch and the high energy in its oil. The kernel oil content in commercial high-oil maize hybrids averages ∼8%, far lower than that in developed high-oil maize lines (as high as 20%). The maize seed/kernel consisted of endosperm (82%) and the germ (embryo and scutellum) (12%). The germ region makes up 80–84% of kernel oil, with the aleurone and endosperm making up 12% and 5%, respectively. High-oil maize may serve as a valuable forage maize germplasm for breeding. Maize oil is also considered as high-quality oil for human health due to the high proportion of polyun-saturated fatty acids. Selection for high oil increases the proportion of germ and further content of germ oil. The problems that over-shadow the successful production of high-oil corn are low grain yield potential, physiological cost of oil synthesis, low seed vigor, low kernel weight, shorter seed longevity, and poor germination of high-oil corn lines. It is necessary to make efforts to generate nested populations or use marker-assisted recurrent selection (MARS) to accumulate the advantageous quantitative trait loci (QTLs) in the pa-rental lines. The oil content of maize inbreeds and hybrids could be further improved with the use of transgenes, genomics, and metabolic engineering technologies in new insight for the development of high oil maize breeding and strategies.

Effect of inoculum sources on caproic acid production from food waste through lactate-based chain elongation: Properties and microbial succession

Caproic acid (CA) production is a promising way to valorize food waste (FW), but the low CA yield seriously restricts its application. Inoculum source as a key factor can affect the microbial communities and CA fermentation processes, but was not fully explored. In the present study, three common inoculum sources namely anaerobic digestion sludge (AD), pit mud (PM) and raw FW (RFW) were selected as inocula to initiate CA production from FW. The organics conversion properties, microbial community succession processes and bacterial metabolism pathways were investigated. Results showed that carbohydrates were effectively degraded into lactic acid and then to CA based on lactate-based chain elongation. The CA yield (0.37 g-COD/g-VS) using AD was higher than that inoculated with PM (0.26 g-COD/g-VS) and RFW (0.32 g-COD/g-VS). Although microbial communities in inocula were totally different, they exhibited similar succession with Firmicutes and Bacteroidetes as the dominant functional phyla. Logically, lactic acid-producing bacteria (e.g. Lactobacillus, Limosilactobacillus and Sporolactobacillus) were enriched at the early stage to prepare electron donor (lactate), and then were replaced by chain elongation bacteria for CA production. However, unclassified_Ruminococcaceae was dominant in reactor with AD, unclassified_Ruminococcaceae, Bifidobacterium, Clostridium_sensu_stricto and unclassified_Prevotellaceae were largely detected in reactors inoculated with PM and RFW, which resulted in different CA yield. This study provides useful information for caproate production from FW, and widens the knowledge of cleaner production from wastes.

Computational insight into transition metal atoms anchored on B2C3P as single‐atom electrocatalysts for nitrogen reduction reaction

NH3 is not only an important chemical raw material, but also a high energy storage chemical with zero carbon. Electrocatalytic nitrogen reduction reaction (NRR), which can be driven by clean electric energy under ambient conditions, have become a promising technology for NH3 synthesis due to their environmentally friendly properties. Due to the limitations of low yield and high overpotential, efficient catalysts are urgently needed to solve this problem. In this study, based on density functional theory method and high throughput screening strategy, the NRR was investigated on transition metal single atom anchored to two‐dimensional B2C3P surface (TM@B2C3P) as single‐atom catalysts (SACs). The results showed that V@B2C3P and Ti@B2C3P have good catalytic properties, and the limiting potentials via the enzymatic pathway were −0.10 and −0.24 V, respectively. Furthermore, the charge density difference and crystal orbital Hamilton population calculations demonstrated that the high catalytic activity can be attributed to the obvious charge transfer between TM@B2C3P and the adsorption intermediates. It is hoped that this work can play a certain role in exploring the application of SACs in NRR.

Near–Infrared Heptamethine Cyanine Photosensitizers with Efficient Singlet Oxygen Generation for Anticancer Photodynamic Therapy

AbstractNear‐infrared photosensitizers are valuable tools to improve treatment depth in photodynamic therapy (PDT). However, their low singlet oxygen (1O2) generation ability, indicated by low 1O2 quantum yield, presents a formidable challenge for PDT. To overcome this challenge, the heptamethine cyanine was decorated with biocompatible S (Scy7) and Se (Secy7) atom. We observe that Secy7 exhibits a redshift in the main absorption to ~840 nm and an ultra‐efficient 1O2 generation capacity. The emergence of a strong intramolecular charge transfer effect between the Se atom and polymethine chain considerably narrows the energy gap (0.51 eV), and the heavy atom effect of Se strengthens spin–orbit coupling (1.44 cm−1), both of which greatly improved the high triplet state yield (61 %), a state that determines the energy transfer to O2. Therefore, Secy7 demonstrated excellent 1O2 generation capacity, which is ~24.5‐fold that of indocyanine green, ~8.2‐fold that of IR780, and ~1.3‐fold that of methylene blue under low‐power‐density 850 nm irradiation (5 mW cm−2). Secy7 exhibits considerable phototoxicity toward cancer cells buried under 12 mm of tissue. Nanoparticles formed by encapsulating Secy7 within amphiphilic polymers and lecithin, demonstrated promising antitumor and anti‐pulmonary metastatic effects, exhibiting remarkable potential for advancing PDT in deep tissues.

Near-Infrared Heptamethine Cyanine Photosensitizers with Efficient Singlet Oxygen Generation for Anticancer Photodynamic Therapy.

Near-infrared photosensitizers are valuable tools to improve treatment depth in photodynamic therapy (PDT). However, their low singlet oxygen (1O2) generation ability, indicated by low 1O2 quantum yield, presents a formidable challenge for PDT. To overcome this challenge, the heptamethine cyanine was decorated with biocompatible S (Scy7) and Se (Secy7) atom. We observe that Secy7 exhibits a redshift in the main absorption to ~840 nm and an ultra-efficient 1O2 generation capacity. The emergence of a strong intramolecular charge transfer effect between the Se atom and polymethine chain considerably narrows the energy gap (0.51 eV), and the heavy atom effect of Se strengthens spin-orbit coupling (1.44 cm-1), both of which greatly improved the high triplet state yield (61%), a state that determines the energy transfer to O2. Therefore, Secy7 demonstrated excellent 1O2 generation capacity, which is ~24.5-fold that of indocyanine green, ~8.2-fold that of IR780, and ~1.3-fold that of methylene blue under low-power-density 850 nm irradiation (5 mW cm-2). Secy7 exhibits considerable phototoxicity toward cancer cells buried under 12 mm of tissue. Nanoparticles formed by encapsulating Secy7 within amphiphilic polymers and lecithin, demonstrated promising antitumor and anti-pulmonary metastatic effects, exhibiting remarkable potential for advancing PDT in deep tissues.

Individualised feeding of concentrate supplement according to milk yield did not increase milk production in pasture-grazed cows near peak lactation

ABSTRACT In grazing systems, feeds other than pasture are often used to increase dry matter intake and milk production. The study aimed to evaluate the effect of individually feeding pasture-grazed dairy cows near peak lactation based on their individualised milk production compared with a flat-rate feeding regime. All cows in the flat-rate treatment were offered 4 kg wet weight (3.6 kg DM) of concentrate/d. In the individualised feeding treatment, cows were offered 6, 4, and 2 kg wet weight/d (5.4, 3.6 and 1.8 kg DM/d) in the high, moderate, and low production groups, respectively. Individualised feeding of concentrates based on cow milk production did not alter milk or milk component yield at a herd level, but increased milk yield and tended to increase yield of fat, protein, and lactose in cows in the medium milk yield tertile. Individualised feeding reduced milk protein yield in cows in the low milk yield tertile, compared with flat rate feeding. The results do not support individualised feeding in grazing dairy systems where the maximum level of concentrate offered/ is ≤ 6 kg DM/d and milk production/cow ≤30 kg milk/d or ≤2.5 kg fat and protein/d.

Extraction of Genomic DNA from Soil Samples by Polyethylene Glycol-Modified Magnetic Particles via Isopropanol Promotion and Ca2+ Mediation.

Obtaining reliable and informative DNA data from soil samples is challenging due to the presence of interfering substances and typically low DNA yields. In this work, we prepared poly(ethylene glycol)-modified magnetic particles (PEG@Fe3O4) for DNA purification. The particles leverage the facilitative effect of calcium ions (Ca2+), which act as bridges between DNA and PEG@Fe3O4 by coordinating with the phosphate groups of DNA and the hydroxyl groups on the particles. The addition of 2-propanol further enhances this Ca2+-mediated DNA adsorption by inducing a conformational change from the B-form to the more compact A-form of DNA. PEG@Fe3O4 demonstrates a DNA adsorption capacity of 144.6 mg g-1. When applied to the extraction of genomic DNA from soil samples, PEG@Fe3O4 outperforms commercial kits and traditional phenol-chloroform extraction methods in terms of DNA yield and purity. Furthermore, we developed a 16-channel automated DNA extraction device to streamline the process and reduce the extraction time. The successful amplification of target bacterial and fungal amplicons underscores the potential of this automated, device-assisted method for studying soil microbial diversity.

Transcriptional regulation of phospholipid transport in cotton fiber elongation by GhMYB30D04-GhHD1 interaction complex.

Cotton fiber length is basically determined by well-coordinated gene expression and phosphatidylinositol phosphates (PIPs) accumulation during fiber elongation but the regulatory mechanism governing PIPs transport remains unknown. Here, we report a MYB transcription factor GhMYB30D04 in Gossypium hirsutum that promotes fiber elongation through modulating the expression of PIP transporter gene GhLTPG1. Knockout of GhMYB30D04 gene in cotton (KO) results in a reduction of GhLTPG1 transcripts with lower accumulation of PIPs, leading to shorter fibers and lower fiber yield. Conversely, GhMYB30D04 overexpression (GhMYB30D04-OE) causes richer PIPs and longer cotton fibers, mimicking the effects of exogenously applying PIPs on the ovules of GhMYB30D04-KO and wild type. Furthermore, GhMYB30D04 interacts with GhHD1, the crucial transcription factor of fiber initiation, to form an activation complex stabilized by PIPs, both of which upregulate GhLTPG1 expression. Comparative omics-analysis revealed that higher and extended expressions of LTPG1 in fiber elongation mainly correlate with the variations of the GhMYB30D04 gene between two cotton allotetraploids, contributing to longer fiber in G. babardense. Our work clarifies a mechanism by which GhHD1-GhMYB30D04 form a regulatory module of fiber elongation to tightly control PIP accumulation. Our work still has an implication that GhMYB30D04-GhHD1 associates with development transition from fiber initiation to elongation.

Water and Irrigation Needs of Tuber Crops in Coastal Climates: A Review

One of the most essential elements for plant growth is water. Large amounts of it are required by plants constantly throughout their life cycle. It significantly affects agricultural activities like irrigation, soil management, crop production, and chemical spraying environments, as well as plant processes like photosynthesis, respiration, absorption, transport, and use of mineral nutrients. This review examines the impacts of climate change on root and tuber crops, including rising temperatures, altered rainfall patterns, extreme weather events, and changes in pest and disease dynamics. These changes significantly affect root and tuber crop production, leading to lower yields, compromised quality, increased susceptibility to pests and diseases, and limited access to water resources. Adaptation strategies encompass various approaches, such as agronomic practices, crop diversification, improved water management, breeding for climate resilience, and agro ecological methods. In the world, the most significant root and tuber crops are cassava, sweet potatoes, and potatoes. Water will produce maximum production for root crops; however, water stress during critical stages might adversely affect the final output of root crops. The purpose of this article of review is to understand the water and irrigation needs of tuber crops (sweet potato, greater and lesser yams, aerial yams, elephant foot yams, xanthosoma, and cassava) that are effectively produced in Maharashtra's coastal climate. This review emphasizes the urgent need to address climate change impacts on tropical root and tuber crops. It highlights the critical role of adaptive measures in ensuring long-term sustainability and food security in a changing climate.

Engaging vinylene carbonate in ruthenium-catalyzed regioselective C-4 methylenation and C-8 formylmethylation of isoquinolinones.

Herein, we disclose the first reports on the utilization of vinylene carbonate as a C1 methylene source in ruthenium-catalyzed additive controlled regioselective C4-methylenation and weak chelation-assisted C8-formylmethylation of isoquinolinones. Adopting vinylene carbonate as both a C2 and C1 synthon is an important highlight of this work. Amide carbonyl acts as the traceless directing group in C8-formylmethylation. Remarkably, in this reaction, two C-C bonds form in one-pot producing dimeric isoquinolinones by employing vinylene carbonate as a methylene surrogate in the presence of copper acetate as an additive. Importantly, unsymmetrical dimers were achievable, albeit in low yield. Extensive control experiments are conducted to decipher the reaction mechanism. It is evident from the mechanistic studies, that the formation of a formylmethyl group in situ at the C4-carbon undergoes dimerization, oxidation and subsequent decarboxylation to produce methylene-bridged isoquinolinone dimers. This protocol is scalable and compatible with a repertoire of substrates and shows high functional group tolerance. Harnessing vinylene carbonate as both a C2 and C1 synthon is an important highlight of this work.

Optimization of fermentation conditions for the production of recombinant feruloyl esterase BpFaeT132C-D143C.

Feruloyl esterases (FAEs) are a crucial component of the hemicellulose-degrading enzyme family that facilitates the degradation of lignocellulose while releasing hydroxycinnamic acids such as ferulic acid with high added value. Currently, the low enzyme yield of FAEs is one of the primary factors limiting its application. Therefore, in this paper, we optimized the fermentation conditions for the expression of FAEBpFaeT132C-D143C with excellent thermal stability in Escherichia coli by experimental design. Firstly, we explored the effects of 11 factors such as medium type, isopropyl-β-D-thiogalactopyranoside (IPTG) concentration, and inoculum size on BpFaeT132C-D143C activity separately by the single factor design. Then, the significance of the effects of seven factors, such as post-induction temperature, shaker rotational speed, and inoculum size on BpFaeT132C-D143C activity, was analyzed by Plackett-Burman design. We identified the main factors affecting the fermentation conditions of E. coli expressing BpFaeT132C-D143C as post-induction temperature, pre-induction period, and post-induction period. Finally, we used the steepest ascent path design and response surface method to optimize the levels of these three factors further. Under the optimal conditions, the activity of BpFaeT132C-D143C was 3.58 U/ml, which was a significant 6.6-fold increase compared to the pre-optimization (0.47 U/ml), demonstrating the effectiveness of this optimization process. Moreover, BpFaeT132C-D143C activity was 1.52 U/ml in a 3-l fermenter under the abovementioned optimal conditions. It was determined that the expression of BpFaeT132C-D143C in E. coli was predominantly intracellular in the cytoplasm. This study lays the foundation for further research on BpFaeT132C-D143C in degrading agricultural waste transformation applications.

Degradation of phenol by metal-free electro-fenton using a carbonyl-modified activated carbon cathode: Promoting simultaneous H2O2 generation and activation

The low yield of hydrogen peroxide, narrow pH application range, and secondary pollution due to iron sludge precipitation are the major drawbacks of the electro-Fenton (EF) process. Metal-free electro-Fenton technology based on carbonaceous materials is a promising green pollutant degradation technology. Activated carbon cathodes enriched with carbonyl functional groups were prepared using a two-step annealing method for the degradation of phenol pollutants. The •OH in the activation process of H2O2 were identified using the EPR test technique. The action mechanism of carbonyl groups on H2O2 activation was investigated in conjunction with density functional theory (DFT) calculations. The EPR tests demonstrated that the modified activated carbon could promote the in-situ activation of H2O2 to •OH. And the results of material analysis and DFT showed that C=O could facilitate the activation of hydrogen peroxide through the electron transfer mechanism as an electron-donating group. Electrochemical tests showed that both the oxygen reduction activity and 2e−ORR selectivity of the modified activated carbons were significantly improved. Compared with the original activated carbon cathode and EF, the degradation efficiency of phenol in the ACNH-1000/GF cathode was increased by 58.10% and 45.61%, respectively. Compared with EF, ACNH-1000/GF metal-free electro-Fenton effectively expands the pH application range, and is proven to be less affected by solution initial pH, while avoiding secondary pollution. The metal-free electro-Fenton system can save more than a quarter of the cost of EF system. This study has a deep understanding of the reaction mechanism of the carbonyl modified activated carbon, and provides valuable insights for the design of metal-free catalysts, so as to promote its application in the degradation of organic pollutants.

Farmed crickets (Orthoptera: Gryllidae) raised with dermestids (Coleoptera: Dermestidae) suffer from reduced and delayed growth, but not enough to explain reports of dramatic yield loss.

The mass production of insects for food and feed is an expanding North American industry. Facilities that mass rear insects are at risk of pest infestations because the optimal environmental conditions for rearing beneficial species may also support the development of pest species. Here, we present the first recorded results detailing the interactions between dermestids and farmed crickets. Cricket farms have reported extremely low harvest yield during heavy dermestid infestations, but the exact reasons for this low yield are unknown. Many dermestid larvae are covered in dense, detachable, barbed setae called hastisetae, which are used by the larvae as an active trapping system against arthropod predators. We designed a series of experiments to test the hypotheses that a dermestid pest of cricket farms, black larder beetle (Dermestes ater DeGeer (Coleoptera: Dermestidae)), may be directly impacting Gryllodes sigillatus Walker (Orthoptera: Gryllidae) yield through the physical effects of hastisetae ingestion and/or indirectly impacting cricket yield through competition for fishmeal, a primary source of protein in conventional cricket feed. Our predictions that G. sigillatus life history and survival would be negatively affected by dermestids were largely refuted. Females fed infested diets grew less mass, but not smaller body size, compared to females fed uninfested diets. We also found that while G. sigillatus experienced delayed growth early in life after living with dermestids, they were able to tolerate living with, and consuming, dermestid larvae. We discuss how these findings have led to new hypotheses concerning how dermestid infestations drive reductions in cricket farm yield.