Low-temperature Scanning Tunneling Microscopy Research Articles

Moiré-induced electronic structure modifications in monolayer V2S3 on Au(111)

There is immense interest in how the local environment influences the electronic structure of materials at the single layer limit. We characterize moir\'e induced spatial variations in the electronic structure of in-situ grown monolayer V2S3 on Au(111) by means of low temperature scanning tunneling microscopy and spectroscopy. We observe a long-range modulation of the integrated local density of states (LDOS), and quantify this modulation with respect to the moir\'e superstructure for multiple orientations of the monolayer with respect to the substrate. Scanning tunneling spectroscopy reveals a prominent peak in the LDOS, which is shifted in energy at different points of the moir\'e superstructure. Comparing ab initio calculations with angle-resolved photoemission, we are able to attribute this peak to bands that exhibit a large out-of-plane d-orbital character. This suggests that the moir\'e driven variations in the measured density of states is driven by a periodic modulation of the monolayer-substrate hybridization.

On-Surface Synthesis of Nitrogen-Doped Kagome Graphene.

Nitrogen-doped Kagome graphene (N-KG) has been theoretically predicted as a candidate for the emergence of a topological band gap as well as unconventional superconductivity. However, its physical realization still remains very elusive. Here, we report on a substrate-assisted reaction on Ag(111) for the synthesis of two-dimensional graphene sheets possessing a long-range honeycomb Kagome lattice. Low-temperature scanning tunneling microscopy (STM) and atomic force microscopy (AFM) with a CO-terminated tip supported by density functional theory (DFT) are employed to scrutinize the structural and electronic properties of the N-KG down to the atomic scale. We demonstrate its semiconducting character due to the nitrogen doping as well as the emergence of Kagome flat bands near the Fermi level which would open new routes towards the design of graphene-based topological materials.

Electron\u2013phonon coupling in superconducting 1T-PdTe2

We have determined the electron–phonon interaction in type II Dirac semimetallic 1T-PdTe2 by means of helium atom scattering. While 1T-PdTe2 is isostructural with 1T-PtTe2, only the former is superconductor. The difference can be traced to the substantially larger value of the electron–phonon coupling in 1T-PdTe2, λ = 0.58, obtained from the Debye-Waller attenuation of the He specular peak. With this value and the surface Debye temperature, ΘD = 106.2 K, we have figured out the superconducting critical temperature, Tc = 1.83 K given by the BCS theory, which is in good agreement with Tc = (1.95 ± 0.03) K obtained with low-temperature scanning tunneling microscopy. The value of the effective mass related to ΘD indicates that the large electron–phonon coupling in 1T-PdTe2 is due to coupling, not only with the zone-center optical mode O2 at 9.2 meV, as proposed in a recent theoretical study, but also with the zone-boundary acoustic mode LA. Our results suggest that the topological states of a Dirac cone play a negligible role on the onset of superconductivity.

Long-Range Surface-Assisted Molecule-Molecule Hybridization.

Metalated phthalocyanines (Pc's) are robust and versatile molecular complexes, whose properties can be tuned by changing their functional groups and central metal atom. The electronic structure of magnesium Pc (MgPc)-structurally and electronically similar to chlorophyll-adsorbed on the Ag(100) surface is investigated by low-temperature scanning tunneling microscopy and spectroscopy, non-contact atomic force microscopy, and density functional theory. Single, isolated MgPc's exhibit a flat, fourfold rotationally symmetric morphology, with doubly degenerate, partially populated (due to surface-to-molecule electron transfer) lowest unoccupied molecular orbitals (LUMOs). In contrast, MgPc's with neighbouring molecules in proximity undergo a lift of LUMOs degeneracy, with a near-Fermi local density of states with reduced twofold rotational symmetry, indicative of a long-range attractive intermolecular interaction. The latter is assigned to a surface-mediated two-step electronic hybridization process. First, LUMOs interact with Ag(100) conduction electrons, forming hybrid molecule-surface orbitals with enhanced spatial extension. Then, these delocalized molecule-surface states further hybridize with those of neighbouring molecules. This work highlights how the electronic structure of molecular adsorbates-including orbital degeneracies and symmetries-can be significantly altered via surface-mediated intermolecular hybridization, over extended distances (beyond 3nm), having important implications for prospects of molecule-based solid-state technologies.

On-surface formation of metal–organic coordination networks with C⋯Ag⋯C and C=O⋯Ag interactions assisted by precursor self-assembly

Surface-bound reactions are commonly employed to develop nanoarchitectures through bottom-up assembly. Precursor molecules are carefully designed, and surfaces are chosen with the intention to fabricate low-dimensional extended networks, which can include one-dimensional and two-dimensional structures. The inclusion of functional groups can offer the opportunity to utilize unique chemistry to further tune the bottom-up method or form novel nanostructures. Specifically, carbonyl groups open up new avenues for on-surface coordination chemistry. Here, the self-assembly and formation of an organometallic species via the thermally induced reaction of 3,6-dibromo-9,10-phenanthrenequinone (DBPQ) molecules were studied on Ag(100) and Ag(110). Low-temperature ultrahigh vacuum scanning tunneling microscopy revealed the room temperature formation of self-assemblies defined by hydrogen and halogen bonds on Ag(100). Following a thermal anneal to 300 °C, DBPQ on Ag(100) was found to form metal-organic coordination networks composed of a combination of organometallic species characteristics of Ullmann-like coupling reactions and carbonyl complexes. On Ag(110), the C-Br bonds were found to readily dissociate at room temperature, resulting in the formation of disordered organometallic species.

Preface to the special issue dedicated to Professor Richard P. Van Duyne (1945–2019)

Preface to the special issue dedicated to Professor Richard P. Van Duyne (1945–2019)

Atom by Atom Condensation of Sn Single Clusters within Gold-Phosphorus Metal-Inorganic Porous Networks.

Surface supported single-atom catalysts (SACs) and single-cluster catalysts (SCCs) have been an area of rapidly growing interest due to their high efficiency of metal atom utilization and high selectivity and activity toward various catalytic reactions. However, achieving highly dispersed, structurally well-defined SACs and SCCs with high surface loadings while avoiding their sintering to larger nanoparticles (NPs) still remains a nontrivial challenge. Here, by utilizing a recently fabricated porous metal-inorganic gold-phosphorus (AuP) network, highly dispersed single Sn clusters with high surface density can be realized. This is attributed to a synergistic effect of the P6Au6 pores for providing the preferential binding sites to anchor Sn atoms and the role of P9 units as a blocking barrier to prevent the growth of Sn to larger NPs. The atom by atom condensation process of Sn single clusters with sizes ranging from monomers to heptamers as well as their binding configurations with the supporting surface are precisely identified at the atomic level, through the combination of a low-temperature scanning tunneling microscope and density functional theory calculations. Our approach opens new opportunities of utilizing metal-inorganic porous networks for the stabilization of highly dispersed and well-defined SACs and SCCs.

Self-Assembly of Metallo-Supramolecules with Dissymmetrical Ligands and Characterization by Scanning Tunneling Microscopy.

Asymmetrical and dissymmetrical structures are widespread and play a critical role in nature and life systems. In the field of metallo-supramolecular assemblies, it is still in its infancy for constructing artificial architectures using dissymmetrical building blocks. Herein, we report the self-assembly of supramolecular systems based on two dissymmetrical double-layered ligands. With the aid of ultra-high-vacuum, low-temperature scanning tunneling microscopy (UHV-LT-STM), we were able to investigate four isomeric structures corresponding to four types of binding modes of ligand LA with two major conformations complexes A. The distribution of isomers measured by STM and total binding energy of each isomer obtained by density functional theory (DFT) calculations suggested that the most abundant isomer could be the most stable one with highest total binding energy. Finally, through shortening the linker between inner and outer layers and the length of arms, the arrangement of dissymmetrical ligand LB could be controlled within one binding mode corresponding to the single conformation for complexes B.

Polymorphic arrangement of an organic molecule in its hydration environment.

We investigate the polymorphism of complexes formed by the hydration of a functionalized azobenzene molecule by low-temperature scanning tunneling microscopy. Under conditions at which the water-less azobenzene molecules remain as monomers on Au(111), co-adsorption of water leads to water-azobenzene complexes. These complexes prefer to adopt linear arrangements of the azobenzene mediated by its functionalized end groups. Such structures may serve as model systems for investigating the influence of a solvent on a surface reaction.

Efficient photogeneration of nonacene on nanostructured graphene.

The on-surface photogeneration of nonacene from α-bisdiketone precursors deposited on nanostructured epitaxial graphene grown on Ru(0001) has been studied by means of low temperature scanning tunneling microscopy and spectroscopy. The presence of an unoccupied surface state, spatially localized in the regions where the precursors are adsorbed, and energetically accessible in the region of the electromagnetic spectrum where n-π* transitions take place, allows for a 100% conversion of the precursors into nonacenes. With the help of state-of-the-art theoretical calculations, we show that such a high yield is due to the effective population of the surface state by the incoming light and the ensuing electron transfer to the unoccupied states of the precursors through an inelastic scattering mechanism. Our findings are the experimental confirmation that surface states can play a prominent role in the surface photochemistry of complex molecular systems, in accordance with early theoretical predictions made on small molecules.

Inspecting the nonbonding and antibonding orbitals in a surface-supported metal–organic framework

By using low-temperature scanning tunnelling microscopy, we have revealed the spatial distribution and energy separation of the nonbonding and antibonding orbitals associated with individual metal atoms in a surface-supported metal–organic framework.

Homochiral to heterochiral transition in a pentahelicene monolayer on Bi(111).

We report the nucleation and two dimensional (2D) crystallization of the helical aromatic hydrocarbon pentahelicene ([5]H) on the semimetallic Bi(111) surface studied via low-temperature scanning tunneling microscopy. Individual homochiral dimers and heterochiral trimers appear on the substrate at a low coverage. With an increase in the coverage, a chiral phase transition takes place from the 2D conglomerate of [5]H dimers to the 2D racemate of [5]H trimers. The heterochiral [5]H trimers reveal a wavy arrangement due to the swing of 5[H] trimer rows after every second or third trimers. The swing mechanism of the trimer rows can be attributed to the steric repulsion between the adjacent trimers with same handedness.

Controlling Metalation Reaction of Phthalocyanine with Cobalt at Single-Molecule Level on Au(111) Surface

Metalation reaction of metal-free phthalocyanine molecule with Co atom adsorbed on Au(111) surface has been studied <i>in situ</i> at single atom/molecule scale by low-temperature scanning tunneling microscopy (STM) experiment combined with simulations based on density function theory calculations. Through manipulations using STM tip, we showed a controlled manner to have a single metal-free phthalocyanine molecule react with a Co atom to form Co phthalocyanine molecule. In this reaction process, an intermediate state originating from $\pi$-d interaction between the metal-free phthalocyanine molecule and Co atom has been identified. Moreover, we also revealed that the redox reaction represented as bond breaking and bond forming relative to the Co and pyrrolic N atoms, not pyrrolic H atoms, is a key process for dehydrogenation and metalation reaction. Our DFT calculations provided theoretical supporting for the above conclusions, and further understanding of the related mechanisms.

Mirror twin boundaries in MoSe2 monolayers as one dimensional nanotemplates for selective water adsorption.

Water adsorption on transition metal dichalcogenides and other 2D materials is generally governed by weak van der Waals interactions. This results in a hydrophobic character of the basal planes, and defects may play a significant role in water adsorption and water cluster nucleation. However, there is a lack of detailed experimental investigations on water adsorption on defective 2D materials. Here, by combining low-temperature scanning tunneling microscopy (STM) experiments and density functional theory (DFT) calculations, we study in that context the well-defined mirror twin boundary (MTB) networks separating mirror-grains in 2D MoSe2. These MTBs are dangling bond-free extended crystal modifications with metallic electronic states embedded in the 2D semiconducting matrix of MoSe2. Our DFT calculations indicate that molecular water also interacts similarly weak with these MTBs as with the defect-free basal plane of MoSe2. However, in low temperature STM experiments, nanoscopic water structures are observed that selectively decorate the MTB network. This localized adsorption of water is facilitated by functionalization of the MTBs by hydroxyls formed by dissociated water. Hydroxyls may form by dissociating of water at undercoordinated defects or adsorbing of radicals from the gas phase in the UHV chamber. Our DFT analysis indicates that the metallic MTBs adsorb these radicals much stronger than on the basal plane due to charge transfer from the metallic states into the molecular orbitals of the OH groups. Once the MTBs are functionalized with hydroxyls, molecular water can attach to them, forming water channels along the MTBs. This study demonstrates the role metallic defect states play in the adsorption of water even in the absence of unsaturated bonds that have been so far considered to be crucial for adsorption of hydroxyls or water.

Topological superconductivity in a van der Waals heterostructure.

Exotic states such as topological insulators, superconductors and quantum spin liquids are often challenging or impossible to create in a single material1-3. For example, it is unclear whether topological superconductivity, which has been suggested to be a key ingredient for topological quantum computing, exists in any naturally occurring material4-9. The problem can be circumvented by deliberately selecting the combination of materials in heterostructures so that the desired physics emerges from interactions between the different components1,10-15. Here we use this designer approach to fabricate van der Waals heterostructures that combine a two-dimensional (2D) ferromagnet with a superconductor, and we observe 2D topological superconductivity in the system. We use molecular-beam epitaxy to grow 2D islands of ferromagnetic chromium tribromide16 on superconducting niobium diselenide. We then use low-temperature scanning tunnelling microscopy and spectroscopy to reveal the signatures of one-dimensional Majorana edge modes. The fabricated 2D van der Waals heterostructure provides a high-quality, tunable system that can be readily integrated into device structures that use topological superconductivity. The layered heterostructures can be readily accessed by various external stimuli, potentially allowing external control of 2D topological superconductivity through electrical17, mechanical18, chemical19 or optical means20.

Molecular Chains: Arranging and Programming Logic Gates.

One particularly fascinating vision for charge-operated devices is the controlled assembly of structures from single surface-deposited molecules. Here, we report on the assembly of linear clusters that consist of phthalocyanine (H2Pc) molecules on a Ag(111) surface. The molecules are imaged as well as manipulated with a low-temperature scanning tunneling microscope (STM). Upon deprotonation of every second H2Pc, the resulting HPc molecule exhibits an isomeric bistability which can be used as inputs in logic gates. Combining our STM measurements with density functional theory calculations we show that the HPc isomers exhibit a repulsive electrostatic interaction with adjacent H2Pc molecules which, due to the asymmetric charge distribution on HPc, results in a counterclockwise or clockwise molecule tilt of the latter, thereby defining the logic 0 and 1 of the output. It is shown that information can be relayed along molecule chains over distances equivalent to at least nine molecules.

Metalated Graphyne-Based Networks as Two-Dimensional Materials: Crystallization, Topological Defects, Delocalized Electronic States, and Site-Specific Doping.

Graphyne-based two-dimensional (2D) carbon allotropes feature extraordinary physical properties; however, their synthesis as crystalline single-layered materials has remained challenging. We report on the fabrication of large-area organometallic Ag-bis-acetylide networks and their structural and electronic properties on Ag(111) using low-temperature scanning tunneling microscopy combined with density functional theory (DFT) calculations. The metalated graphyne-based networks are robust at room temperature and assembled in a bottom-up approach via surface-assisted dehalogenative homocoupling of terminal alkynyl bromides. Large-area networks of several hundred nanometers with topological defects at domain boundaries are obtained due to the Ag-acetylide bonds' reversible nature. The thermodynamically controlled growth mechanism is explained through the direct observation of intermediates, which differ on Ag(111) and Au(111). Scanning tunneling spectroscopy resolved unoccupied states delocalized across the network. The energy of these states can be shifted locally by the attachment of a different number of Br atoms within the network. DFT revealed that free-standing metal-bis-acetylide networks are semimetals with a linear band dispersion around several high-symmetry points, which suggest the presence of Weyl points. These results demonstrate that the organometallic Ag-bis-acetylide networks feature the typical 2D material properties, which make them of great interest for fundamental studies and electronic materials in devices.

Force Spectroscopy of Iron Tetraphenylporphyrin Molecules with Cl Tips

At low sample voltages, Cl ions may be bidirectionally transferred between a Fe tetraphenylporphyrin (FeTPP) molecule on Au(111) and the tip of a low-temperature scanning tunneling microscope that ...

Low temperature scanning tunneling microscopy and spectroscopy on laterally grown InxGa1−xAs nanowire devices

Laterally grown InxGa1−xAs nanowires (NWs) are promising candidates for radio frequency and quantum computing applications, which, however, can require atomic scale surface and interface control. This is challenging to obtain, not least due to ambient air exposure between fabrication steps, which induces surface oxidation. The geometric and electronic surface structures of InxGa1−xAs NWs and contacts, which were grown directly in a planar configuration, exposed to air, and then subsequently cleaned using atomic hydrogen, are studied using low-temperature scanning tunneling microscopy and spectroscopy (STM/S). Atomically flat facets with a root mean square roughness of 0.12 nm and the InGaAs (001) 4 × 2 surface reconstruction are observed on the top facet of the NWs and the contacts. STS shows a surface bandgap variation of 30 meV from the middle to the end of the NWs, which is attributed to a compositional variation of the In/Ga element concentration. The well-defined facets and small bandgap variations found after area selective growth and atomic hydrogen cleaning are a good starting point for achieving high-quality interfaces during further processing.

Coulomb blockade effects in a topological insulator grown on a high-Tc cuprate superconductor

The evidence for proximity-induced superconductivity in heterostructures of topological insulators and high-Tc cuprates has been intensely debated. We use molecular-beam epitaxy to grow thin films of topological insulator Bi2Te3 on a cuprate Bi2Sr2CaCu2O8+x, and study the surface of Bi2Te3 using low-temperature scanning tunneling microscopy and spectroscopy. In few unit-cell thick Bi2Te3 films, we find a V-shaped gap-like feature at the Fermi energy in dI/dV spectra. By reducing the coverage of Bi2Te3 films to create nanoscale islands, we discover that this spectral feature dramatically evolves into a much larger hard gap, which can be understood as a Coulomb blockade gap. This conclusion is supported by the evolution of dI/dV spectra with the lateral size of Bi2Te3 islands, as well as by topographic measurements that show an additional barrier separating Bi2Te3 and Bi2Sr2CaCu2O8+x. We conclude that the prominent gap-like feature in dI/dV spectra in Bi2Te3 films is not a proximity-induced superconducting gap. Instead, it can be explained by Coulomb blockade effects, which take into account additional resistive and capacitive coupling at the interface. Our experiments provide a fresh insight into the tunneling measurements of complex heterostructures with buried interfaces.