Low-temperature Procedure Research Articles

Green synthesis and characterization of titanium dioxide nanoparticles and their photocatalytic activity

In this study, we compared two low-temperature synthesis procedures for the large-scale production of titania nanoparticles (NPs). The first takes place in an aqueous medium with an acidic environment, by using a triblock polymer surfactant (Pluronic 123). The second involves a polycondensation reaction of alkoxide precursors at 70 °C in a water-in-oil (W/O) microemulsion with a volume ratio of 1:1, using cetylpyridinium bromide (CPB) as a cationic surfactant. The morphological and structural characterization of the samples was carried out through Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD). The photoactivity of the nanostructured titania was evaluated by measuring the photodegradation of Methylene Blue (MB). The solvent-free synthetic approach provided spherical titania nanoparticles mainly constituted by rutile crystallites with a very good synthetic yield. However, the photodegradation rate of MB for such titania nanoparticles ranges from 30 % to 40 %, after 1h under solar irradiation. Conversely, titania nanoparticles obtained through microemulsion synthesis show a photodegradation rate of more than 90 % comparable to titania P25. This high-yield synthesis leads to the formation of TiO2 nanoparticles characterized by small crystallite aggregates (rutile and anatase).

High-density integration of uniform sub-22 nm silicon nanowires for transparent thin film transistors on glass

Ultrathin catalytical silicon nanowires (SiNWs), grown as orderly arrays upon glass substrates, are ideal 1D channels for the construction of high-performance field effect transistors for low-power and high aperture/transparency electronics. In this work, a rather uniform growth integration of high-density ultrathin SiNWs has been accomplished directly on glass substrate at 290 °C, via an in-plane solid–liquid-solid mechanism. The indium (In) catalyst thickness deposited on the dense guiding terrace steps was identified as a key parameter to suppress the size dispersion of the In droplets, and thus enable a uniform growth of ultrathin SiNWs with diameters down to DNW=21.8 ± 1.8 nm, a close-to-unity guided growth rate and an excellent transparency > 90 % in spectrum ranging from 350 nm to 950 nm. Based on a convenient dry plasma etching and low-temperature passivation procedure, high-performance SiNW transistors have been successfully fabricated upon a dense array of parallel SiNWs as channels with a narrow NW-to-NW spacing of 100 nm. A high current ratio Ion/Ioff > 107, a low off-state current down to 0.1 pA, a steep subthreshold swing of SS∼120 mV dec-1 and excellent positive and negative bias stabilities have been demonstrated, as well as SiNW-based inverter logics that achieve a gain of 14.6 V/V under a drive voltage of 2.25 V. These results highlight the potential of catalytic SiNWs to serve as advantageous 1D channels for large-area display or transparent electronics.

Microstructure and oxidation of a Ni–Al based intermetallic coating formation on a Monel-400 alloy

Abstract The purpose of this work was to examine how the microstructure and oxidation characteristics of Monel 400 Alloy were affected by the low-temperature aluminizing method. Monel 400 alloy was subjected to a low-temperature aluminizing procedure for 2 and 4 h at 600, 650, and 700 °C. Pure aluminum powder was used as the source of aluminum deposition to prepare the packs for the process. The activator and inert filler utilized were ammonium chloride (NH4Cl) and Al2O3 powder, respectively. The coating surfaces were characterized using energy dispersive spectroscopy (EDS) and scanning electron microscopy (SEM), as well as X-ray diffraction (XRD) analysis. It was discovered that the through-thickness variance in the layer microstructure varied between 4 and 30 µm, and that it increased with greater process temperatures and times. The coating layer hardness grew to 800 HV after the deposition process, whereas the matrix hardness remained at 200 HVN. Furthermore, the sample that was coated at 600 °C for 4 h was exposed to oxidation at 750–800 and 850 °C. It was found that the oxidation kinetics were 176 kJ/mol.

Influence of photoanode pre-heating treatment temperatures prior to dye immersion process on dye-sensitized solar cells photovoltaic performances

Several efforts of photoanode treatment, such as surface modification, doping introduction, defect engineering, and heating treatment, have been developed to improve the photovoltaic performances of dye-sensitized solar cells (DSSC). Amid these options, alternative routes that require less demanding conditions are highly sought. Here we introduce an effective and convenient, non-vacuum low-temperature procedure to enhance the DSSC’s photovoltaic performances by photoanode pre-heating treatment prior to the dye immersion process. The experimental result showed that pre-heating treatment at 120 °C improves the efficiency and short-circuit current by about 28.4% and 19.1%, respectively. The conducted transient photovoltage measurements revealed that the increase of pre-heating temperatures leads to a longer electron lifetime and higher charge collection efficiency.

PBA-Derived Heteroatom-Doped Mesoporous Graphitic Spheroids as Peroxidase Nanozyme for In Vitro Tumor Cells Detection.

Inspired by the two kinds of naturally occurring peroxidases (POD) with vanadium or heme (iron)-based active catalytic centers, we have developed a dual metal-based nanozyme with dual V and Fe-based active catalytic centers. Co-doping of graphene with heteroatoms has a synergistic effect on the catalytic properties of the nanomaterial as the distances of migration of the substrates drastically reduce. However, a few studies have reported the codoping of heterometallic elements in the graphene structure due to the complexity of the synthesis procedures. Herein, we report the synthesis of in situ doped bimetallic VNFe@C mesoporous graphitic spheroids nanozyme via pyrolysis without the assistance of any template assisted method. The Prussian-blue analog-based precursor material was synthesized by a facile one-step low-temperature synthesis procedure. The bimetallic spheroids showed an excellent affinity toward H2O2, with a Km value of 0.26 mM when compared to 0.436 for the natural POD, which is much better than the natural POD, which was utilized to detect tumor cells in vitro through the intracellular H2O2 produced by these cells under high oxidative stress. The VNFe@C mesoporous spheroids generate dual reactive oxygen species, including the •OH and •O2H- radicals, in the presence of H2O2, which are responsible for the POD-like activity of these nanozymes, while the bimetallic V/Fe doping plays a synergistic role in the enhancement of the activity of codoped graphitic spheroids.

A novel low-temperature procedure for oleogelation of heat-sensitive oils: Oleogels based on tucumã oil and ethyl cellulose

Oleogels are made by structuring oils with an oleogelator, e.g., ethyl cellulose (EC), and can be used as fat replacers in foods. Also, oleogels made from oils rich in bioactives, e.g., tucumã oil (TCO), could possess additional nutritional benefits. However, sensitive compounds are often degraded during the harsh conditions of most oleogelation procedures. Here we present an adapted low-temperature indirect method (IM) to structure TCO with EC, which is based on emulsification with aqueous ethanol as continuous phase, and the physicochemical properties are compared to oleogels with the same composition but produced by a direct method (DM) at high temperature. For IM, TCO was emulsified with EC ethanolic dispersions, followed by solvent removal and shearing. DM resulted in weak gels (G' < 10000 Pa), with low oil binding capacity (OBC) (12.63–66.26%), low carotenoid retention (CR) (20.7–31.6%) and complete depletion of α-tocopherol. Conversely, IM provided strong oleogels (G' > 10000 Pa), with high OBC (87.82–100.04%), CR (>95%) and α-tocopherol content (293–322 mg/kg). TCO oleogels with different physical properties and retention of sensitive compounds were obtained by DM and IM, showing the potential of IM oleogelation to preserve bioactives in the oleogels and producing healthier fat alternatives for the food industry.

Niobium-Tungsten Bimetallic Oxide Electrodes with High Dual-Band Electrochromic Performance Prepared by Hydrothermal Method

Dual-band electrochromic (EC) smart windows, capable of selectively regulating visible (VIS) and near-infrared (NIR) light, are one of the most attractive candidates for significantly reducing the energy consumption of buildings. Niobium-tungsten bimetallic oxides exhibit a fast ion exchange rate and high cycle stability in the electrochemical field because of various structural chemistry in the pseudobinary system Nb2O5/WO3, showing excellent dual-band EC potential. Herein, we employ a facile hydrothermal technique to synthesize Nb18W16O93 (NWO) films with low temperature and facile procedure. The obtained NWO films exhibit impressive dual-band electrochromic performances, including high optical regulation (radiation blocking rates of 33.1% and 77.5% in the VIS and NIR band) and short coloring/bleaching time (12 s/2.6 s at 633 nm and 6.5 s/6.1 s at 1600 nm). These results demonstrate that NWO is a high-performance dual-band EC material and provide a practical strategy to synthesize the NWO electrodes with nanorod stacking architectures in a facile and low-cost way.

Nano-tablets and rods-shaped Fe and Ni oxide/hydroxide encapsulated graphene for asymmetric supercapacitor and OER applications

Ternary hybrid electrodes have been spotlighted in the energy storage and conversion domain due to their superior physicochemical and electrochemical attributes. Yet, elevating their electrochemical properties remains a challenge. Herein, gamma‑iron oxide nano-tablets and nickel hydroxide nano-rods encapsulated graphene sheets (γ-Fe2O3@Ni(OH)2@G/NF) nanocomposite (NC) electrodes are synthesized, using PVP as a surfactant by a simple, cost-effective and low-temperature synthesis procedure for supercapacitor (SC) and OER applications. These interconnected graphene sheets with γ-Fe2O3 and Ni(OH)2 are seen to enhance the electrical conductivity of NCs, leading to outstanding supercapacitive performances. The developed NC electrode displays the highest specific capacitance (Csp) of ∼937.5 F g−1 in the alkaline electrolyte. Moreover, Dunn's investigations, revealing the surface capacitive controlled contribution (77 %@10 mV s−1), predominates in the total capacitance, thus affirming the capacitor behavior of the electrodes. Using the NC electrode, an asymmetric supercapacitor (ASC) is constructed, and exhibits a maximum Csp of ∼120.3 F g−1 with an outstanding stability performance of 87.3 % capacitance retention. Moreover, the ASC displays an energy density of 22 Wh kg−1 under a power density of 1100 W kg−1. Overall, the results demonstrate that the developed ternary-hybrid composite shows promise as a worthy electrode for future energy demands.

An experimental investigation of how coal's secondary oxidation process is impacted by primary oxidation temperature and ventilation

A worldwide calamity has resulted from spontaneous coal combustion, and actions such as opening enclosed fire areas and processing coal left in mines can ignite oxidized coal. Using a procedural temperature rise testing system, the impact of various primary oxidation temperatures and ventilation rates on secondary coal oxidation was examined in this research. The variation laws of the indicator gas, characteristic temperature, and exothermicity parameters were mainly analyzed, and the activation energy of each stage in the low-temperature oxidation process was calculated. The findings demonstrate that the secondary oxidation process's trend of sign gases (CO and C2H4) and exothermic characteristic characteristics of coal with temperature is unaffected by the primary oxidation temperature and ventilation. Increasing ventilation reduces the indicator gas concentration and the coal's exothermic characteristic parameters in the initial stages of low-temperature secondary oxidation, whereas it has the reverse effect in the later stages. Stage Ⅰ of the secondary low-temperature combustion procedure is significantly influenced by ventilation and the first oxidation temperature, but stages Ⅱ and III are only marginally affected. When the coal is secondarily oxidized at low temperatures, primary oxidation reduces the Ea of stage I, while increased ventilation raises the Ea of stage I. T1 (critical temperature) rises as the airflow rate rises, whereas T2 (dry cracking temperature) falls. The findings can provide theoretical guidance to open enclosed fire areas and process coal left in mines and other goaf operations and can further enrich the theory of preventing and controlling secondary coal oxidation.

Effective Removal of Methyl Orange Dyes Using an Adsorbent Prepared from Porous Starch Aerogel and Organoclay

Intending to provide efficient and compact wastewater remediation, the present work is exploiting and introducing a novel composite prepared from porous starch aerogel (PSA) and organically modified Ca-montmorillonite (OMMT) for the removal of dyes from aqueous samples. First, potato starch components were used as a hydrolysis precursor to obtain PSA. The organoclay samples were prepared by co-intercalation of octadecylamine (ODA) into Ca-MMT using a low-temperature melting procedure. Composites with different starch-to-organoclay ratios of 10:1, 1:1, and 1:10 were then prepared by a blending process in distilled water and used for methyl orange (MO) uptake. The removal of methyl orange dyes increased with the amount of organoclay in the PSA matrix. Characterization revealed that organoclay synergy improved the PSA surface chemistry, while an important improvement in textural properties and thermal stability was also observed. The composite’s efficiency was demonstrated by high removal capabilities towards MO in most experimental runs, with a maximum adsorption capacity beyond 344.7 mg/g. The fitting result showed that MO adsorption follows a monolayer adsorption model, and chemisorption was the rate-controlling step. Nonetheless, this study proved the great potential of PSA/OMMT in dyeing wastewater treatment. Furthermore, starch modification is proven as an effective approach to enhancing the performance of starch-derived adsorbents.

A comprehensive review of the current progresses and material advances in perovskite solar cells.

Recently, perovskite solar cells (PSCs) have attracted ample consideration from the photovoltaic community owing to their continually-increasing power conversion efficiency (PCE), viable solution-processed methods, and inexpensive materials ingredients. Over the past few years, the performance of perovskite-based devices has exceeded 25% due to superior perovskite films achieved using low-temperature synthesis procedures along with evolving appropriate interface and electrode-materials. The current review provides comprehensive knowledge to enhance the performance and materials advances for perovskite solar cells. The latest progress in terms of perovskite crystal structure, device construction, fabrication procedures, and challenges are thoroughly discussed. Also discussed are the different layers such as ETLs and buffer-layers employed in perovskite solar-cells, seeing their transmittance, carrier mobility, and band gap potentials in commercialization. Generally, this review delivers a critical assessment of the improvements, prospects, and trials of PSCs.

High-Performance Photocatalytic Reduction of Nitrogen to Ammonia Driven by Oxygen Vacancy and Ferroelectric Polarization Field of SrBi4 Ti4 O15 Nanosheets.

Photo-responsive semiconductors can facilitate nitrogen activation and ammonia production, but the high recombination rate of photogenerated carriers represents a significant barrier. Ferroelectric photocatalysts show great promise in overcoming this challenge. Herein, by adopting a low-temperature hydrothermal procedure with varying concentrations of glyoxal as the reducing agent, oxygen vacancies (Vo) are effectively produced on the surface of ferroelectric SrBi4 Ti4 O15 (SBTO) nanosheets, which leads to a considerable increase in photocatalytic activity toward nitrogen fixation under simulated solar light with an ammonia production rate of 53.41µmol g-1 h-1 , without the need of sacrificial agents or photosensitizers. This is ascribed to oxygen vacancies that markedly enhance the self-polarization and internal electric field of ferroelectric SBTO, and hence, facilitate the separation of photogenerated charge carriers and light trapping as well as N2 adsorption and activation, as compared to pristine SBTO. Consistent results are obtained in theoretical studies. Results from this study highlight the significance of surface oxygen vacancies in enhancing the performance of photocatalytic nitrogen fixation by ferroelectric catalysts.

Structure and Bonding in CsNa2Hg18, a New Ternary Amalgam with Strong Coulombic Bonding Contributions

The new ternary amalgam CsNa2Hg18 was synthesised from the elements in an unconventional low-temperature procedure. It crystallises in a tetragonal structure type (space group I4/mmm, a = 7.3054(7) and c = 20.046 Å) and combines ionic and metallic bonding contributions. In the crystal structure, Cs and Na atoms are embedded in a Hg scaffold with highly covalent Hg–Hg bonding. The alkali metal atoms are coordinated exclusively by Hg atoms in unusual environments with coordination numbers CN = 24 for Cs and CN = 16 for Na. Polar amalgams are suitable model systems for studying the parameters influencing the ’bad metal behaviour’ in polar intermetallic phases. We present structural studies on the basis of powder and single crystal diffraction data together with measurements of the specific resistivity and DFT calculations of the electronic structure. For CsNa2Hg18, a high specific resistivity can be observed, but the Ioffe–Regel saturation of the resistivity is expressed much less than in other polar amalgams.

Personalized injectional carboxytherapy for patients with early complications after low-temperature hardware cosmetic procedures

BACKGROUND: Recently, there has been an increase in early complications after localized exposure to low temperatures (cryolipolysis) for the treatment of localized fat deposition. Carboxytherapy is a method that improves the condition of the microcirculatory bed and reduces swelling.&#x0D; AIM: to develop and evaluate the use of a personalized method of injection carboxytherapy in patients with adverse events (edema and neuropathy) after hardware methods of correction (cryolipolysis) of local fat deposits.&#x0D; MATERIAL AND METHODS: The study involved 45 patients aged 3243 years with a diagnosis of "E65 Localized fat deposition", who received early complications (local edema and a change in sensitivity at the site of exposure to the cryopapillary ― in the sub-umbilical region) after the cryolipolysis procedure (hardware non-surgical correction of local fat deposits). Before the start of treatment, all patients underwent genetic testing according to the "Cosmetology" panel. Three groups were identified, which received injection carboxytherapy locally, paravertebral in the projection of the lumbosacral region, or a combination of both.&#x0D; RESULTS: When analyzing data after a course of treatment, patients with an extended carboxytherapy protocol showed a significant improvement in the quality of life, both in the immediate and in the long-term study period. This was expressed in a statistically significant decrease in intradermal edema and a rapid regression of the pain syndrome in the main group compared to other study groups.&#x0D; CONCLUSION: In patients with early local complications after cryolipolysis, the use of injection carboxytherapy is justified not only locally but also paravertebral, which significantly reduces the recovery period, contributes to a more rapid reduction of local edema and neuropathy phenomena, and also allows obtaining a stable clinical result. Personalized injection carboxytherapy is an effective factor in the relief of complications after cryolipolysis.

Effect of Traditional Cooking and Sous Vide Heat Treatment, Cold Storage Time and Muscle on Physicochemical and Sensory Properties of Beef Meat.

Consumers are avoiding the consumption of highly processed foods, aware of the negative effects of the additives or high temperatures used on the biological value of the food. This causes an interest in ways of minimal processing or low-temperature cooking procedures. However, to achieve the desired organoleptic quality, it is necessary to know the relationship between the parameters of the treatments and the type of raw material. The purpose of this study was to investigate the complex effects of traditional cooking and sous vide heat treatment, cold storage time and muscle on the physicochemical and sensory properties of beef. The study material consisted of samples of musculus longissimus thoracis and musculus semitendinosus obtained from beef half-carcasses. The muscles were subjected to traditional cooking in water at 95 °C until the temperature inside the piece reached 65 °C and sous vide treatment at 65 °C for 2 h. The study was performed after 2 and 21 days of cold storage. Instrumental evaluation of texture parameters, color and sensory evaluation of meat was carried out. Meat stored for 21 days was characterized by more favorable TPA test (Texture Profile Analysis) results compared to meat evaluated 48 h post mortem. The study also showed positive effects of sous vide heat treatment on texture parameters and sensory properties (especially on tenderness and palatability), as well as differences in the formation of quality traits between muscles. Given the trends associated with energy-saving technologies, it is desirable to seek the optimal combination of temperature and time of fixation treatments at an acceptable level of quality. The use of low-temperature cooking for as little as 2 h, yields positive results in sensory evaluation of juiciness, tenderness, or palatability.

Spontaneous combustion characteristics and mechanism of water-immersed and air-dried brown coal

ABSTRACT To reveal the influential laws and mechanism of water immersion on the spontaneous combustion traits of lignite in the low-temperature oxidation stage. Raw coal (HL), water-immersed for 30 days (HL-S30), 90 days (HL-S90) and 150 days (HL-S150), were taken as the research objects. The pore evolution characteristics and functional group migration law of coal were explored by Scanning Electron Microscopy (SEM), Low-temperature Nitrogen Adsorption Test (LNAT) and Fourier Transform Infrared Spectroscopy (FTIR). The low-temperature oxidation procedure was simulated by Programmed Heating Test (PHT), and the gas release characteristics, exothermicity and ultimate spontaneous combustion parameters of the relic coal were compared. These findings demonstrated that the discriminant indexes of spontaneous combustion tendency of four specimens change periodically with temperature, but generally the spontaneous combustion intensity of HL-S30 and HL-S150 is greater than HL, and HL-S90 is the least. The micro reasons for increasing oxidation activity of HL-S30 and HL-S150 are as follows: the number of micropores of water-immersed coal is almost 3 ~ 4 times that of HL, and the pores expanded with immersion which helps to enhance the adsorption of oxygen; the content of broken aromatic hydrocarbon -C = C- reached 50%, the total amount of hydroxy -OH decreased to 2/3 of HL, while the content of carboxyl -COOH and ether-oxygen bond -C-O- of active group doubled which are beneficial to accelerate the process of free radical chain reaction, and promote the gas release and the temperature of residual coal to reach the ignition point. The research findings enrich the basic theory of spontaneous combustion traits of water-impregnated coal, which help reduce the fire accidents and hidden dangers in actual production.

0.1C–11Mn medium manganese steel treated by quenching and tempering process

In this work, we developed a third-generation automobile steel with high strength and elongation of 0.1C–11Mn medium manganese steel using a simple quenching and low-temperature tempering heat treatment procedure. At different austenitisation temperatures, the microstructure and mechanical properties of manganese steel were examined. The microstructure included tempered martensite (TM), austenite, and ultra-fine-grained ferrite. The steel achieved the highest strength and elongation of 39.1GPa·% when it was quenched at 630°C for 10 min and tempered at 450°C for 5 min. In conclusion, dislocation strengthening was the primary factor to increase yield strength. At 630°C, the steel achieved its best mechanical properties because of a higher austenite stability, work-hardening capability, and synergistic impact of ultra-fine-grained ferrite and martensite.

Short-Range Diffusion Enables General Synthesis of Medium-Entropy Alloy Aerogels.

Medium-entropy alloy aerogels (MEAAs) with the advantages of both multimetallic alloys and aerogels are promising new materials in catalytic applications. However, limited by the immiscible behavior of different metals, achieving single-phase MEAAs is still a grand challenge. Herein, a general strategy for preparing ultralight 3D porous MEAAs with the lowest density of 39.3 mg cm-3 among the metal materials is reported, through combining auto-combustion and subsequent low-temperature reduction procedures. The homogenous mixing of precursors at the ionic level makes the short-range diffusion of metal atoms possible to drive the formation of single-phase MEAAs. As a proof of concept in catalysis, as-synthesized Ni50 Co15 Fe30 Cu5 MEAAs exhibit a high mass activity of 1.62 A mg-1 and specific activity of 132.24 mA cm-2 toward methanol oxidation reactions, much higher than those of the low-entropy counterparts. In situ Fourier transform infrared and NMR spectroscopies reveal that MEAAs can enable highly selective conversion of methanol to formate. Most importantly, a methanol-oxidation-assisted MEAAs-based water electrolyzer can achieve a low cell voltage of 1.476 V at 10 mA cm-2 for making value-added formate at the anode and H2 at the cathode, 173 mV lower than that of traditional alkaline water electrolyzers.

Personalized injectional carboxytherapy for patients with early complications after low-temperature hardware cosmetic procedures

We conducted a clinical and instrumental examination in 62 patients diagnosed with E65 — localized fat deposition at the age of 28–42 years and body mass index (BMI) — 26–27, who received the cryolipolysis procedure (hardware non-surgical correction of local fat deposits) the day before on the infraumbilical area of the abdomen in order to correct local fat deposits. After 1–2 days, the patients began to complain of pronounced local edema and a change in sensitivity at the site of exposure to cryopressure. All patients underwent genetic testing on the Cosmetology panel before the start of treatment. When comparing the control and comparison groups, it was found that the use of an extended method of injectable carboxytherapy in the second comparison group with a high risk of inflammation and «weakness» of the vascular wall significantly improves the quality of life in terms of the dermatology life quality index (DLQI) compared to the first comparison group and the control groups. Edema decreases clinically, which correlates with a significant decrease in intradermal edema and dermal thickness in the first comparison group compared to the second comparison group and in the control group according to ultrasound examination with a 30 MHz sensor. Personalized injectional carboxytherapy is an effective factor in relieving complications after cryolipolysis.

Fly-ash derived Na-P1, natural zeolite tuffs and diatomite in motor oil retention

Aluminosilicate materials of various grain sizes, i.e., Kimolos, Samos and Sorano zeolite tuffs, Samos diatomite and synthetic zeolite prepared from Meliti fly ash via alkaline hydrothermal treatment, were tested as new sorbents for oil leakage remediation. Two lubricant oils of different viscosity, i.e., SHELL HELIX HX5 20 W-50 and ULVAC SMR-100 were selected as potential adsorbates. All sorbents employed demonstrated exceptional oil retention capacity values exceeding 100% (w/w); specifically, Kimolos and Sorano zeolites as well as thermally treated Samos diatomite proved best reaching 160% (w/w) oil sorption. Mordenite and phillipsite were mostly detected in Kimolos and Italian zeolite tuffs, respectively. Na-P1 zeolite, produced for the first time from Meliti fly ash without pretreatment via a low-temperature hydrothermal procedure, was characterized by XRD and SEM. The zeolitization process, leading to Na-P1 as the sole synthesis product, was carried out without the use of additives. The synthetic Na-P1 zeolite displayed significant sorption capacity, retaining 125 and 105% (w/w) of the viscous and less viscous oils tested, respectively. Thus, valorization of all aluminosilicate materials employed was achieved. Both porosity measurements and SEM micrographs demonstrated that the highest lubricant oil retention values were reached by macroporous adsorbents having open structure and large surface area, suitable for overcoming the fluid’s resistance to flow and avoiding pore-blocking effects.