Low Resistance Research Articles

Recycling of collagen from solid tannery waste and prospective utilization as adhesives.

Abstract This study explores the innovative potential of recycled collagen derived from tannery waste for use in high-performance adhesive formulations. The leather industry generates significant amounts of solid waste, primarily from chromium-tanned leather, which poses substantial environmental challenges. Recent advancements in recycling techniques have opened new avenues for repurposing this waste, particularly through collagen extraction, which comprises about 30-35% of tannery residues. This research systematically reviews the methods and applications of collagen extraction, highlighting the material’s versatility and environmental benefits when used as a bio-adhesive. The review identifies key challenges such as low water resistance, shear strength, and adhesiveness in collagen-based adhesives compared to synthetic counterparts. However, innovative solutions are emerging, including the incorporation of silane coupling agents and cross-linking technologies that significantly improve the water resistance and mechanical properties of these adhesives. Economic analyses further support the viability of using tannery waste-derived collagen in adhesive production, aligning with global sustainability goals and reducing reliance on petrochemical-based adhesives. Despite these advancements, the transition from laboratory research to commercial applications remains a significant challenge. Current studies primarily focus on small-scale experiments, with limited pilot-scale studies available. Nonetheless, the potential for collagen-based adhesives to replace harmful chemicals in industrial applications is promising, especially in sectors requiring biodegradable and non-toxic materials. This review concludes that while significant progress has been made, further research is necessary to overcome existing limitations and fully realize the commercial potential of collagen-based adhesives derived from tannery waste.

Application of Drug Delivery System Based on Nanozyme Cascade Technology in Chronic Wound.

Chronic wounds are characterized by long-term inflammation, including diabetic ulcers, traumatic ulcers, etc., which provide an optimal environment for bacterial proliferation. At present, antibiotics are the main clinical treatment method for chronic wound infections. However, the overuse of antibiotics may accelerate the emergence of drug-resistant bacteria, which poses a significant threat to human health. Therefore, there is an urgent need to develop new therapeutic strategies for bacterial infections. Nanozyme-based antimicrobial therapy (NABT) is an emerging antimicrobial strategy with broad-spectrum activity and low drug resistance compared to traditional antibiotics. NABT has shown great potential as an emerging antimicrobial strategy by catalyzing the generation of reactive oxygen species (ROS) with its enzyme-like catalytic properties, producing a powerful bactericidal effect without developing drug resistance. Nanozyme-based cascade antimicrobial technology offers a new approach to infection control, effectively improving antimicrobial efficacy by activating cascades against bacterial cell membranes and intracellular DNA while minimizing potential side effects. However, it is worth noting that this technology is still in the early stages of research. This article comprehensively reviews wound classification, current methods for the treatment of wound infection, different types of nanozymes, the application of nanozyme cascade reaction technology in antimicrobial therapy, and future challenges and prospects.

4D Printing of Multifunctional and Biodegradable PLA-PBAT-Fe3O4 Nanocomposites with Supreme Mechanical and Shape Memory Properties.

4D printing magneto-responsive shape memory polymers (SMPs) using biodegradable nanocomposites can overcome their low toughness and thermal resistance, and produce smart materials that can be controlled remotely without contact. This study presented the development of 3D/4D printable nanocomposites based on poly (lactic acid) (PLA)-poly (butylene adipate-co-terephthalate) (PBAT) blends and magnetite (Fe3O4) nanoparticles. The nanocomposites are prepared by melt mixing PLA-PBAT blends with different Fe3O4 contents (10, 15, and 20 wt%) and extruded into granules for material extrusion 3D printing. The morphology, dynamic mechanical thermal analysis (DMTA), mechanical properties, and shape memory behavior of the nanocomposites are investigated. The results indicated that the Fe3O4 nanoparticles are preferentially distributed in the PBAT phases, enhancing the storage modulus, thermal stability, strength, elongation, toughness, shape fixity, and recovery of the nanocomposites. The optimal Fe3O4 loading is found to be 10 wt%, as higher loadings led to nanoparticle agglomeration and reduced performance. The nanocomposites also exhibited fast shape memory response under thermal and magnetic activation due to the presence of Fe3O4 nanoparticles. The 3D/4D printable nanocomposites demonstrated multifunctional multi-trigger shape-memory capabilities and potential applications in contactless and safe actuation.

Enhanced photoelectrochemical CO2 reduction activity towards selective generation of alcohols over CuxO/SrTiO3 heterojunction photocathodes

Photoelectrochemical reduction (PECR) of CO2 to value-added chemicals and fuels will reduce the dependency on fossil fuels, also it will solve environmental issues that arise due to greenhouse gases. A heterojunction of CuxO/SrTiO3 with varying post-annealing temperature ranges from 300 to 600 °C (CS300-600) was synthesized by overlying the spin-coated SrTiO3 on electrodeposited Cu2O over the FTO glass substrate. The synthesized photoelectrode's crystallinity and phase formation significantly varied by varying the post-annealing temperature, which was characterized via XRD and Raman spectroscopy. Optical, morphological, type of heterojunction formation and elemental surface oxidation states of photoelectrodes were studied through UV–visible DRS spectrum, FE-SEM, and XPS analysis respectively. Electrocatalytic analysis such as Linear Sweep Voltammetry (LSV), and Electrochemical Impedance Spectrometry (EIS) was employed, thus it conforms to the highest photocurrent density (−1.38 mA/cm2 at −0.6V vs. Ag/AgCl), and low charge transfer resistance (RCT=0.412 kΩ) at the electrode-electrolyte interfaces for CS500 photoelectrode as compared to others photoelectrodes. PECR of CO2 to liquid product formation was evaluated by applying different potential ranges (0 to −0.6 V vs. Ag/AgCl). Highest methanol formation of 48.69 μmol.cm−2hr−1, which is approximately 9 times enhanced as compared to the pure Cu2O (5.62 μmol.cm−2hr−1) photoelectrode at 0 V vs Ag/AgCl for CS500 heterojunction. Optimization of overlaying SrTiO3 synthesis temperature for crystallization formation on Cu2O and applied photoelectrode potential findings could pave the way for designing other new heterojunction types for selective liquid alcohol production.

Prevalence, Virulence Genes, Drug Resistance and Genetic Evolution of Trueperella pyogenes in Small Ruminants in Western China.

Trueperella pyogenes is a significant opportunistic pathogen that causes substantial economic losses in animal agriculture due to its ability to infect various animal tissues and organs. Limited research has been conducted on the prevalence and biological characteristics of T. pyogenes isolated from sheep and goats. This study aimed to isolate T. pyogenes from clinical samples of sheep and goats in western China, examining genetic evolutionary relationships, antibiotic resistance, and virulence genes. Between 2021 and 2023, standard bacteriological methods were used to isolate and identify T. pyogenes from 316 samples (209 from goats and 107 from sheep) collected from 39 farms. Susceptibility to 14 antibiotics was tested using broth microdilution per CLSI guidelines, and PCR detected eight virulence genes. Whole-genome sequencing analyzed genetic relationships and gene carriage status in 39 isolates. The results indicated that 86 strains of T. pyogenes were isolated from 316 samples, yielding an isolation rate of 27.2% (goats n = 47, 22.5%; sheep n = 39, 36.4%). The virulence genes plo, cbpA, nanH, nanP, fimA, fimC, and fimE were present in 100%, 66.7%, 64.1%, 71.8%, 69.2%, 59.0%, and 82.1% of isolates, respectively, with none carrying the fimG gene. The dominant virulence genotype was plo/nanH/nanP/fimA/fimC/fimE. The isolates exhibited resistance to erythromycin (44.2%, 38/86), gentamicin (38.4%, 33/86), sulfamethoxazole/trimethoprim (37.2%, 32/86), tetracycline (32.6%, 28/86), and streptomycin (32.6%, 28/86), and low resistance to chloramphenicol (14.0%, 12/86), ciprofloxacin (7.0%, 6/86), penicillin (5.8%, 5/86), and clindamycin (4.7%, 4/86). All isolates were susceptible to cefotaxime, vancomycin, and linezolid. Among the 86 isolates, 37 (43.0%) displayed multidrug resistance (MDR) characteristics. The whole genome sequencing of 39 isolates identified eight types of resistance genes, including ant(2″)-Ia, ant(3″)-Ia, cmlA1, cmx, erm(X), lnu(A), sul1, and tet(W). Except for tet(W), erm(X), and sul1, the other resistance genes were reported for the first time in T. pyogenes isolated in China. The drug susceptibility test results and resistance gene detection for the isolated strains were consistent for tetracycline, erythromycin, gentamicin, and sulfisoxazole. Similar allelic profiles and genetic evolutionary relationships were found among isolates from different farms. This study highlights the antibiotic resistance status and virulence gene-carrying rate of Trueperella pyogenes, providing a basis for clinical medication.

The role of a tantalum interlayer in enhancing the properties of Fe3O4 thin films.

High spin polarization and low resistivity of Fe3O4 at room temperature have been an appealing topic in spintronics with various promising applications. High-quality Fe3O4 thin films are a must to achieve the goals. In this report, Fe3O4 films on different substrates (SiO2/Si(100), MgO(100), and MgO/Ta/SiO2/Si(100)) were fabricated at room temperature with radio-frequency (RF) sputtering and annealed at 450 °C for 2 h. The morphological, structural, and magnetic properties of the deposited samples were characterized with atomic force microscopy, X-ray diffractometry, and vibrating sample magnetometry. The polycrystalline Fe3O4 film grown on MgO/Ta/SiO2/Si(100) presented very interesting morphology and structure characteristics. More importantly, changes in grain size and structure due to the effect of the MgO/Ta buffering layers have a strong impact on saturation magnetization and coercivity of Fe3O4 thin films compared to cases of no or just a single buffering layer.

Cobalt‐Based Ferrite Modified Carbon Nanotubes Fibers for Flexible and Disposable Microelectrode Toward Electrochemical Glucose Sensing

ABSTRACTGlucose detection is critical in clinical health and the food industry, particularly in the diagnosis of blood sugar levels. Carbon‐based fiber materials have recently featured prominently as non‐enzymatic electrochemical glucose detectors. Herein, cobalt‐based ferrite (CoFe2O4) in the form of nanoparticles has been successfully fabricated over the carbon nanotubes (CNTs) fiber via a simple hydrothermal process. Fabricated microelectrode (CoFe2O4@CNTs) was investigated as an electrocatalyst toward the non‐enzymatic electrochemical glucose sensors. The structure and morphology of the modified fiber were studied by scanning electron microscopy including energy‐dispersive X‐ray spectroscopy. The electrochemical capability of the microelectrode was analyzed by using different electrochemical techniques including cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy (EIS). The proposed sensors exhibited a superb sensitivity of 0.21 µAcm−2 mM−1, a good linear range from 1 to 9 mM, and a lower detection limit of 1.7 mM. Further investigation via EIS indicated the low charge transfer resistance as compared to the bare CNTs‐based fiber. Outcomes revealed that the material can potentially prove promising for the disposable microelectrode toward electrochemical glucose sensing.

Progress in Biopolymer Coatings for Achieving Sustainable Paper and Paperboard Packaging for Food Applications: A Brief Review

ABSTRACTPaper and paperboard are cellulosic materials used to manufacture food packaging. However, their low resistance to water and fat, as well as their poor barrier properties have limited their packaging applications as food contact materials. The current review analyses the use of biopolymeric coatings as an alternative to improve surface and barrier properties in paper and paperboard with focus in food sector application. Advances in coated paper (board) can be classified into three groups: (1) coatings manufactured with a single biopolymer; (2) coatings manufactured with composite biopolymers; and (3) biopolymeric coatings incorporated with bioactive molecules or nanoparticles. The use of a single or composite biopolymer coating improved the mechanical, barrier properties, and grease resistance. In contrast, the use of chemical compounds and nanoparticles has imparted active properties (antibacterial and ethylene scavengers) in the resulting coating paper (board). The water vapour transmission rate has been reduced with the use of biopolymeric coatings. Future studies should focus on applying coated paper (board) in foods with a special interest in food self‐life, migration, and toxicity.

Features of the Application of Coatings Based on the ZrN System to Increase Resistance to Mechanical Wear and Corrosion of Titanium Alloy Products

The coatings of ZrN, (Zr,Ti)N, (Ti,Zr,Hf)N and (Ti,Zr,Nb)N deposited on the titanium alloy substrate were compared. The wear resistance in the pin-on-disk test together with the Al2O3 indenter and the corrosion resistance in 3.5% NaCl solution were studied. It was found that the (Zr,Nb,Ti)N coating has the best resistance to wear, but has low corrosion resistance. The (Ti,Zr,Hf)N coating, on the contrary, has the best corrosion resistance, but low resistance to wear. The ZrN coating has good corrosion resistance combined with good resistance to wear. This coating is best suited for use in friction conditions with a ceramic counterbody under the influence of seawater. An important resource for increasing the properties of coatings is increasing their adhesion to the substrate, which can be achieved in two combined ways: (1) complete removal of the original oxide layer from the surface of the substrate and (2) the use of optimal compositions of the adhesive sublayer, which have not only high adhesive properties in relation to both the substrate and the coating, but also high strength. While the introduction of Nb into the ZrN coating composition increases wear resistance and the introduction of Hf increases corrosion resistance, the ZrN coating without additives best resists wear and corrosion simultaneously.

Self-forming Na3P/Na2O interphase on a novel biphasic Na3Zr2Si2PO12/Na3PO4 solid electrolyte for long-cycling solid-state Na-metal batteries

A novel biphasic Na3Zr2Si2PO12/Na3PO4 solid electrolyte is proposed to effectively address critical anode interface challenges for solid-state Na-metal batteries (SSSMBs). The Na3PO4 phase, at an optimal composition of ∼20 mol%, transforms the interface chemistry throughout the NZSP electrolyte, which results in dense electrolytes with high Young's modulus, rapid ion transport (6.2 × 10−4 S cm-1) at low activation barrier (0.19 eV), negligible electronic conductivity, and excellent sodiophilicity. The AIMD/DFT calculations and XPS analysis reveal a self-formed, (electro)chemically stable mixed Na+/electron-conducting interphase, comprising Na3P and Na2O, at the Na anode interface. The interphase not only homogenizes the Na+ flux distribution and accelerates the interfacial charge transport, but prevents continuous interfacial reactions, thereby stabilizing the anode interface against dendrite formation. Benefiting from the low-impedance, dendrite-free anode interface, Na symmetric cells demonstrate a low interface resistance of 12.7 Ω cm2 and exceptional cyclability of 3000 h. Additionally, full cells with Na3V2(PO4)3 cathodes achieve 93 % capacity retention after 550 cycles at 0.5 C. This research comprehensively elucidates and leverages the critical advantages of Na3PO4 in enhancing the bulk and interface properties of Na3Zr2Si2PO12 solid electrolytes. The design strategy of biphasic solid electrolytes presented here offers new insights into the developing high-performance solid electrolytes for advanced SSSMBs.

Listeriosis: Characteristics, Occurrence in Domestic Animals, Public Health Significance, Surveillance and Control.

Listeriosis is a dangerous zoonosis caused by bacteria of the genus Listeria, with Listeria monocytogenes (LM) being the most pathogenic species. Listeria monocytogenes has been detected in various animal species and in humans, and its ability to evolve from an environmental saprophyte to a powerful intracellular pathogen is driven by the invasion mechanisms and virulence factors that enable cell invasion, replication and cell-to-cell spread. Key regulatory systems, including positive regulatory factor A (PrfA) and the stress-responsive sigma factor σB, control the expression of virulence genes and facilitate invasion of host cells. Listeriosis poses a significant threat to cattle, sheep and goat herds, leading to abortions, septicemia and meningoencephalitis, and ruminants are important reservoirs for Listeria, facilitating transmission to humans. Other Listeria species such as Listeria ivanovii and Listeria innocua can also cause disease in ruminants. Resilience of LM in food processing environments makes it an important foodborne pathogen that is frequently transmitted through contaminated meat and dairy products, with contamination often occurring along the food production chain. In humans, listeriosis primarily affects immunocompromised individuals, pregnant women and the elderly and leads to severe conditions, such as meningitis, septicemia and spontaneous abortion. Possible treatment requires antibiotics that penetrate the blood-brain barrier. Despite the relatively low antimicrobial resistance, multidrug-resistant LM strains have been detected in animals, food and the environment. Controlling and monitoring the disease at the herd level, along with adopting a One Health approach, are crucial to protect human and animal health and to minimize the potential negative impacts on the environment.

Rapid preparation of anti-retrogradation starch by choline chloride based deep eutectic solvents: A comparative study

Legumes are a widespread and cheap source of starch. However, legume starches are prone to retrogradation in applications. Therefore, enhancing the resistance to retrogradation is important to ensure the quality of starch products. In this study, the effects of amines, alcohols, and carboxylic acids deep eutectic solvents (DESs) on the retrogradation properties of pea starch (PS) were investigated. The results showed that the starches treated with carboxylic acid DESs for only 30 min exhibited low paste viscosity, high paste clarity and anti-retrogradation. The carboxylic acid DESs treatment resulted in holes or cracks appearing on the starch surface, a decrease in molecular ordering, relative crystallinity, and amylose content. The thermal enthalpy of starch as well as the pasting viscosity were substantially reduced after the treatment. The paste clarity and the resistance to retrogradation were significantly improved. Conversely, the structure, pasting and retrogradation properties of starch treated with amine and alcohol DESs exhibited only slight differences compared to PS. The carboxylic acid DESs took a short time for the starch modification, and the modified starch paste with low viscosity, high clarity, and resistance to retrogradation. The study could provide an environmentally-friendly and cost-effective method for the preparation of starch with well anti-retrogradation properties.

Enhancing the electrochemical performance of graphite sheet electrodes for ketamine detection

Flexible graphite sheets (GS) have been a promising material for developing electrochemical sensors. In this work, we showed that the electrochemical activation protocol (+1.4 V followed by -1.0 V vs. Ag|AgCl|KCl(sat.) both at 200 s) in alkaline medium (0.5 mol l-1 NaOH) enhances the electrochemical activity of GS. Before the treatment, cyclic voltammetric profile of inner-sphere [Fe(CN)6]3-/4- redox couple at 50 mV s-1 exhibited an ill-defined voltammetric profile (ΔEp = 800 mV) while an increase in the reversibility was achieved (ΔEp = 225 mV) after the treatment. Additionally, the lower charge transfer resistance (Rct) measured by Electrochemical Impedance Spectroscopy (EIS) and a higher heterogeneous electron transfer constant (k0) corroborate with the enhancement in the electrochemical performance of treated GS electrodes. The SEM images revealed an irregular pattern with number of grooves, indicating a partially surface exfoliation and AFM analysis displayed an increase in the roughness. These findings agreed with the estimation of electroactive area which increased 3-times after the treatment. As proof of concept, ketamine (KET), an anesthetic often used as drug of abuse, was determined in synthetic saliva and veterinary pharmaceutical samples using treated GS electrodes and square wave voltammetric measurements. Linear range of 5.0–100.0 µmol l-1 with a limit of detection value of 2.1 µmol l-1 was obtained for KET. Appropriate recovery values (∼105 %) for the analysis of samples were achieved.

Cell cycle checkpoint revolution: targeted therapies in the fight against malignant tumors.

Malignant tumors are among the most important causes of death worldwide. The pathogenesis of a malignant tumor is complex and has not been fully elucidated. Studies have shown that such pathogenesis is related to abnormal cell cycle progression. The expression levels of cyclins, cyclin-dependent kinases (CDKs), and CDK inhibitors as well as functions of the cell cycle checkpoints determine whether the cell cycle progression is smooth. Cell-cycle-targeting drugs have the advantages of high specificity, low toxicity, low side effects, and low drug resistance. Identifying drugs that target the cell cycle and applying them in clinical treatments are expected to promote chemotherapeutic developments against malignant tumors. This article aims to review drugs targeted against the cell cycle and their action mechanisms.

Using Thin Ultra-High-Molecular-Weight Polyethylene Coatings to Reduce Friction in Frost-Resistant Rubbers.

Frost-resistant rubbers retain their highly elastic properties over a wide temperature range. They are used in various friction units (e.g., seals), but their high friction coefficient and low wear resistance lead to the need for frequent replacement. In this paper, we propose applying thin (several hundred microns) UHMWPE coatings to formed rubber rings. The application technology depends on the required coating thickness. Friction tests of the coatings and pure UHMWPE were performed using the ball-on-disk (unidirectional sliding) scheme for various loads and velocities. In the experiments, the friction coefficients and temperatures near the contact area were determined. Friction tracks were studied using microscopy methods. The sliding contact of the ball and the two-layer material was modeled to obtain the dependences of the deformation component of friction on the sliding velocity for coatings of different thicknesses. UHMWPE is sensitive to frictional heating, so the thermal problem of determining the temperature in the contact area was also solved. It is shown that the minimum friction coefficient occurs for coatings with a thickness of 600 μm. At the same time, in the case of the 300 μm coating, the surface of the friction track is practically no different from the initial one. Thus, the studied combination of polymers provides antifrictional properties and wear resistance to the surface layer while maintaining the damping properties of rubber.

Design of type II quaternary double-decker heterostructure Cu-WO3-BiVO4-Bi2S3[sbnd]NiOOH photoanode for stable and efficient photoelectrochemical water splitting

BackgroundBismuth vanadate (BiVO4) and nickel oxyhydroxide (NiOOH) are the prominent photo(electro)catalysts for water-splitting photoelectrodes. The strong visible light absorbers of the Bi2S3 decorated type II photoanode of WO3/BiVO4/NiOOH efficiently improve the photo-excitons in the photoanodes. MethodsIn this work, type II semiconductors heterostructure photoanodes are fabricated as Cu:WO3/BiVO4/Bi2S3/NiOOH. The bottom layer of heavily Cu- doped n-type WO3 nanoplatelets is grown on FTO to make nano-heterostructure Cu:WO3/BiVO4 photoanodes. The Bi2S3 semiconductor has been grown on the BiVO4 by chemical bath deposition and NiOOH deposited using the photo-assisted electrodeposition method. The resulting periodically ordered BiVO4/WO3 platelets distinctly outperform by the Bi2S3 and NiOOH-decorated quaternary photoanodes. Significant findingsAs a result, the as-prepared photoanode shows a high photocurrent density of 6.85 mA cm−2 at 0 V vs. Ag/AgCl under the irradiation of 100 mW/cm2 AM 1.5 G simulated sunlight. With the higher photoactivity of Bi2S3 and NiOOH cocatalysts, the photoanode substantially gains stability at higher saturation photocurrents. Overall, the photoanode resulted in a low charge transfer resistance (387.4 Ohm.cm2) and a higher built-in potential of 180 mV, with 2.67 % of ABPE and 2.1 % of STH efficiencies at 0.3 V vs. Ag/AgCl.

Extremely Low Thermal Resistance of β-Ga2O3 MOSFETs by Co-integrated Design of Substrate Engineering and Device Packaging.

Gallium oxide (Ga2O3) emerges as a promising ultrawide bandgap semiconductor, which is expected to surpass the performance of current wide bandgap materials, like GaN and SiC, in electronic devices. However, widespread application of Ga2O3 is hindered by its extremely low thermal conductivity and lack of effective device-level thermal management strategies. In this work, Ga2O3 metal-oxide-semiconductor field-effect transistors (MOSFETs) are fabricated by conducting co-integrated design of substrate engineering with layer transferring and device packaging. 3D Raman thermography is introduced as a novel method to analyze the temperature distribution within the device, which provides valuable insights into their thermal performances. A high-quality Ga2O3-SiC heterogeneous integrated material is successfully fabricated with an extremely low interface thermal resistance of 6.67 ± 2 m2·K/GW. Compared to the homoepitaxial Ga2O3 MOSFETs, the degradation of Ion/Ioff in Ga2O3-SiC MOSFETs is decreased by 1.5 orders of magnitude, and that of Ron is decreased by 31%, showing the great thermal stability of Ga2O3-SiC MOSFETs. With the additional device packaging, a significant one order-of-magnitude reduction in the thermal resistance of the Ga2O3-SiC MOSFET is achieved, reaching a record-low value of 4.45 K·mm/W in the reported Ga2O3 MOSFETs. This work demonstrates an efficient strategy for device-level thermal management in next-generation Ga2O3 power and RF applications.

Activity of the Caged Xanthone Morellic Acid against Vancomycin-Resistant Enterococcus Infection by Targeting the Bacterial Membrane.

Vancomycin-resistant Enterococcus (VRE) is an important nosocomial opportunistic pathogen that is associated with multidrug resistance. Here, we demonstrate that morellic acid inhibits VRE by restoring its sensitivity to vancomycin and ampicillin with low drug resistance and efficient biofilm clearance effects. Morellic acid binds to inner membrane phospholipids, such as phosphatidylethanolamine (PE), phosphatidylglycerol (PG), and cardiolipin (CL) of VRE, such that the fluidity and proton-motive force (PMF) interfere with the damaged inner membrane, causing intracellular reactive oxygen species (ROS) accumulation and bacterial death. Transcriptional analyses supported this effect on inner membrane-related pathways such as fatty acid biosynthesis and glycerophospholipid metabolism. Moreover, morellic acid significantly eliminated residual bacteria in the spleen, liver, kidneys, and abdominal effusion in mice. Our findings indicate the potential applications of morellic acid as an antibacterial agent or adjuvant for treating VRE infections.

Productive Poplar Genotypes Exhibited Temporally Stable Low Stem Embolism Resistance and Hydraulic Resistance Segmentation at the Stem-Leaf Transition.

Breeding tree genotypes that are both productive and drought-resistant is a primary goal in forestry. However, the relationships between plant hydraulics and yield at the genotype level, and their temporal stabilities, remain unclear. We selected six poplar genotypes from I-101 (Populus alba) × 84 K (P. alba × Popolus tremula var. glandulosa) for experiments in the first and fourth years after planting in a common garden. Measurements included stem embolism resistance, shoot hydraulic resistance and its partitioning between stems and leaves, vessel- and pit-level anatomy, leaf carbon acquisition capacity, carbon allocation to leaves, and aboveground biomass (yield proxy). Significant genetic variations in hydraulic properties and yield were found among genotypes in both years. Productive genotypes had wide vessels, large thin pit membranes, small pit apertures, and shallow pit chambers. Hydraulic resistance was negatively correlated with yield, enabling high stomatal conductance and assimilation rates. Productive genotypes allocated less aboveground carbon and hydraulic resistance to leaves. Temporally stable trade-offs between stem embolism resistance and yield, and between hydraulic segmentation and yield, were identified. These findings highlight the tight link between hydraulic function and yield and suggest that stable trade-offs may challenge breeding poplar genotypes that are both productive and drought-resistant.

Study on the Effect of Hot and Humid Environmental Factors on the Mechanical Properties of Asphalt Concrete.

To investigate the effect of hot and humid environmental factors on the mechanical properties of asphalt mixtures research, in this paper, the dynamic modulus of asphalt mixtures under the effects of aging, dry-wet cycling, and coupled effects of aging and dry-wet cycling were measured by the simple performance tester (SPT) system, and the dynamic modulus principal curves were fitted based on the sigmoidal function. The results show that under the aging effect, the dynamic modulus of asphalt mixture increases with the aging degree; the dynamic modulus of short-term aged, medium-term aged, long-term aged, and ultra-long-term aged asphalt mixtures increased by 9.3%, 26.4%, 44.8%, and 57%, respectively, compared to unaged asphalt mixtures at 20 °C and 10 Hz; the high-temperature stability performance is enhanced, and the low temperature cracking resistance performance is enhanced; under the dry-wet cycle, the aging effect of asphalt water is more obvious in the early stage, and dynamic modulus of resilience of the mixture is slightly increased. In the long-term wet-dry cycle process, water on the asphalt and aggregate erosion increased, the structural bearing capacity attenuation, and the dynamic modulus of rebound greatly reduced at 20 °C and 10 Hz. For example, the dynamic modulus of asphalt mixtures with seven wet and dry cycles increased by 3% compared to asphalt mixtures without wet and dry cycles, and the dynamic modulus of asphalt mixtures with 14 cycles of wet and dry cycles and 21 cycles of wet and dry cycles decreased by 10.8% and 16.5%, respectively, compared to asphalt mixtures without wet and dry cycles. The main curve as a whole shifted downward; the high-temperature performance decreased significantly; in the aging wet-dry cycle coupling, the aging asphalt mixture is more susceptible to water erosion, and the first wet-dry cycle after the mix by the degree of water erosion is relatively small, along with the dynamic modulus of rebound. The dynamic modulus of resilience is relatively larger, and the high-temperature performance is relatively better, while the low-temperature performance is worse.