Low-loss Materials Research Articles

Evidence of Widespread Volcanic Activity near Hebrus Valles on Mars Revealed by SHARAD

Hebrus Valles is an outflow channel system in the plain-forming terrains of southeastern Utopia Planitia, Mars. These terrains may have formed through a combination of liquid water and volcanic processes, yet their nature, subsurface structure, and composition remain unclear. We investigate these terrains by mapping subsurface reflectors across 540 Shallow Radar (SHARAD) profiles and applying two complementary loss tangent inversion techniques. We find moderate loss tangent values across some subregions of Granicus Valles and Hyblaeus Fossae (tan δ = 0.0162 ± 0.0004 and tan δ = 0.019 ± 0.002, respectively), suggesting the presence of basaltic lava flows. We interpret non-detections in the other flows in Granicus Valles to be due to the presence of radar-lossy materials formed through aqueous processes, which supports the hypothesized occurrence of lahars in this region. A small area near Hebrus Valles exhibits subsurface reflectors with low to moderate loss tangents (tan δ = 0.010 ± 0.003), suggesting the presence of pristine lava flows or sedimentary materials capped by lava flows. We also find a widespread occurrence of very low-loss tangent materials near Hyblaeus Dorsa (tan δ = 0.0045 ± 0.0002), which may represent a lobe of the Medusae Fossae Formation or similar high-porosity materials buried underneath a lava flow. Together, these findings suggest that volcanic activity played a central role in the formation of terrains across the broader Hebrus Valles region.

Measurement of complex dielectric permittivity of medium and low loss materials at 36.624 GHz and 52.263 GHz using a single iris rectangular cavity resonator

Measurement of complex dielectric permittivity of medium and low loss materials at 36.624 GHz and 52.263 GHz using a single iris rectangular cavity resonator

Optical anapole modes in hybrid metal–dielectric nanoantenna for near-field enhancement and optical sensing

Metal–dielectric nanostructures in the optical anapole modes are essential for light–matter interactions due to the low material loss and high near-field enhancement. Herein, a hybrid metal–dielectric nanoantenna composed of six wedge-shaped gold (Au) nanoblocks as well as silica (SiO2) and silicon (Si) nanodiscs is designed and analyzed by the finite element method (FEM). The nanoantenna exhibits flexibility in excitation and manipulation of the anapole mode through the strong coupling between the metal and dielectrics, consequently improving the near-field enhancement at the gap. By systematically optimizing the structural parameters, the electric field enhancement factors at wavelengths corresponding to the anapole modes (AM1 and AM2) can be increased to 518 and 1482, respectively. Moreover, the nanoantenna delivers great performance in optical sensing such as a sensitivity of 550 nm/RIU. The results provide guidance and insights into enhancing the coupling between metals and dielectrics for applications such as surface-enhanced Raman scattering and optical sensing.

Integrated lithium niobate optical mode (de)interleaver based on an asymmetric Y-junction.

Lithium niobate on insulator (LNOI) platforms promise unique advantages in realizing high-speed, large-capacity, and large-scale photonic integrated circuits (PICs) by leveraging lithium niobate's attractive material properties, which include electro-optic and nonlinear optic properties, low material loss, and a wide transparency window. Optical mode interleavers can increase the functionality of future PICs in LNOI by enabling optical mode division multiplexing (MDM) systems, allowing variable mode assignment while maintaining high channel utilization and capacity. In this Letter, we experimentally demonstrate an optical mode interleaver based on an asymmetric Y-junction on the LNOI platform, which exhibits an insertion loss of below 0.46 dB and modal cross talk of below -13.0 dB over a wavelength range of 1500-1600 nm. The demonstrated mode interleaver will be an attractive circuit component in future high-speed and large-capacity PICs due to its simple structure, scalability, and capacity for efficient and flexible mode manipulation on the LNOI platform.

Nonvolatile phase change material based multifunctional silicon waveguide mode converters

Multimode photonics as a new research field of integrated photonics is closely relying on the waveguide mode, particularly for the higher-order waveguide mode. To efficiently generate higher-order waveguide modes in a single device, here we propose multifunctional silicon waveguide mode converters based on the nonvolatile and low-loss phase change material antimony triselenide (Sb2Se3). Such device is formed by two cascaded conversion regions along the silicon waveguide, where the first conversion region is formed by embedding a tapered Sb2Se3 layer into the silicon waveguide asymmetrically and the second one is formed by embedding two Sb2Se3 layers into the silicon waveguide symmetrically. When the embedded Sb2Se3 layers in two conversion regions undergo the phase transition between amorphous state and crystalline state, such device will achieve the mode conversions from input TE0 mode to output TE0, TE1, TE2, and TE1 + TE3 mode with mode conversion efficiency (CE) > 95%, mode crosstalk (CT) < −17 dB, and insertion loss (IL) < 0.4 dB at λ = 1.55 μm in a device length of only 10.3 μm where this multifunctional mode conversion in a single device has not been reported previously. To eliminate the output hybrid mode, we further revise the design and finally achieve the mode conversion from input TE0 mode to output TE0, TE1, TE2, and TE3 mode directly with a relatively good performance (CE > 85%, CT < −11 dB, and IL < 1 dB at λ = 1.55 μm). We believe the proposed multifunctional mode converters could be used as higher-order mode sources for the multimode photonics applications.

Van der Waals Materials for Overcoming Fundamental Limitations in Photonic Integrated Circuitry.

With the advance of on-chip nanophotonics, there is a high demand for high-refractive-index and low-loss materials. Currently, this technology is dominated by silicon, but van der Waals (vdW) materials with a high refractive index can offer a very advanced alternative. Still, up to now, it was not clear if the optical anisotropy perpendicular to the layers might be a hindering factor for the development of vdW nanophotonics. Here, we studied WS2-based waveguides in terms of their optical properties and, particularly, in terms of possible crosstalk distance. Surprisingly, we discovered that the low refractive index in the direction perpendicular to the atomic layers improves the characteristics of such devices, mainly due to expanding the range of parameters at which single-mode propagation can be achieved. Thus, using anisotropic materials offers new opportunities and novel control knobs when designing nanophotonic devices.

Photonic crystal fiber-based silicon polyamide-coated fiber Bragg gratings

Photonic Crystal Fiber (PCF) constructions, controlled light propagation for measuring amplitude, phase, polarization and wavelength of the spectrum, and PCF-incorporated interferometry techniques are the foundations upon which sensors operate. But the existing PCF techniques have very large stretching that tends to be difficult to align due to the cross-polarization mode of the optical fiber structure. Hence, the novel Polymer graphene-based Hexagonal cladding is designed by using a hexagonal hollowed core and a cladding material of Polymethyl methacrylate reinforced with gyroidal graphene which increases confinement strength. Once the crystal structure is designed, normally the presence of substrate the Q-factors is degraded. On substrates, Q-factors are enhanced by fine-tuning the position of the neighboring holes. Hence, the novel Bilayer Grating Stratum solves the degrading issues in Q-factors, which utilizes a Silicon polyamide-coated FBG in the crystal that is incorporated using the Femto-laser technique thereby increasing the wavelength tenability. To identify the electric field pattern, the designed structure is simulated in COMSOL software. Thus, the proposed system has a high sensitivity of 22 with a low material loss of 0.1% and a low response time of 0.2[Formula: see text]s.

Ultra-broadband low-frequency high-efficiency acoustic energy harvesting with metamaterial-enhanced loudspeakers

Acoustic energy harvesters (AEHs) open up opportunities to recycle noise waste and generate electricity. They provide potential power solutions to a wide range of sensors. However, the practicality of AEHs has long been limited by their narrow bandwidths and low efficiencies. In this study, we present an ultra-broadband AEH and a highly efficient AEH that transforms sound energy into usable electrical power. Our broadband device comprises an electrodynamic loudspeaker driver and an optimized acoustic metamaterial matching layer and is capable of converting 7.6% to 15.1% of total incident sound energy from 50 to 228 Hz. Moreover, we demonstrate that by replacing the loudspeaker surround with a lower-loss material such as PDMS, the energy conversion rate can be significantly increased to 67%. The proposed broadband AEH has a fractional bandwidth eight times the state-of-the-art, while the proposed highly efficient AEH has a peak efficiency three times the state-of-the-art. The outstanding performance makes our designs cost-effective and scalable solutions for noise reduction and power generation.

Monitoring snow water equivalent using the phase of RFID signals

Abstract. The amount of water contained in a snowpack, known as snow water equivalent (SWE), is used to anticipate the amount of snowmelt that could supply hydroelectric power plants, fill water reservoirs, or sometimes cause flooding. This work introduces a wireless, non-destructive method for monitoring the SWE of a dry snowpack. The system is based on an array of low-cost passive radiofrequency identification (RFID) tags, placed under the snow and read at 865–868 MHz by a reader located above the snow. The SWE was deduced from the phase delay of the tag's backscattered response, which increases with the amount of snow traversed by the radiofrequency wave. Measurements taken in the laboratory, during snowfall events and over 4.5 months at the Col de Porte test field, were consistent with reference measurements of cosmic rays, precipitation and snow pits. SWE accuracy was ±18 kg m−2 throughout the season (averaged over three tags) and ±3 kg m−2 during dry snowfall events (averaged over data from two antennas and four or five tags). The overall uncertainty compared to snow weighing was ±10 % for snow density in the range 61–390 kg m−3. The main limitations observed were measurement bias caused by wet snow (biased data were discarded) and the need for phase unwrapping. The method has a number of advantages: it allows for continuous measurement (1 min sampling rate in dry snow), it can provide complementary measurement of tag temperature, it does not require the reception of external data, and it opens the way towards spatialized measurements. The results presented also demonstrate that RFID propagation-based sensing can remotely monitor the permittivity of a low-loss dielectric material with scientific-level accuracy.

Localized Spoof Surface Plasmon Skyrmions Excited by Guided Waves

AbstractRecently, skyrmions are constructed in the system of localized spoof surface plasmons (LSSPs), showing topological robustness and near‐equidistant multi‐resonant response. Guided wave excitation of the LSSP skyrmions plays an elementary role in large‐scale planar integration and construction of complex networks. However, it is not investigated. In this study, the LSSP skyrmions are excited by guided waves supported by two kinds of widely used transmission lines, microstrip line and coplanar waveguide. Space‐coiling meta‐structures with different shapes that support LSSP skyrmions are etched on the ground planes as defected ground structures (DGSs). All structures including resonator, transmission line, input and output ports are in one plane. The structures are fabricated on printed circuit boards (PCBs) and the near‐equidistant multi‐resonant spectra of the LSSP skyrmions are measured. Moreover, to reduce the material loss, the structure is made on MgB2 superconducting film, and the quality factor (Q‐factor) is increased by seven times compared to the corresponding mode on PCB. This study paves the way for the massive planar integration of the LSSP skyrmions and the construction of complex networks with the LSSP skyrmions, and provides an idea for developing metasurfaces with low material loss in the microwave and terahertz bands.

Millimeter-Wave Launcher-in-Package Concept for Car Radar Applications

Transitions from a millimeter-wave integrated circuit (IC) to waveguides tend to have high losses and are difficult to realize in high-volume manufacturing processes. Based on the requirements of car radar systems, we introduce a low-loss and very compact launcher-in-package (LiP) concept, in which a direct transition from the IC is realized. The optimized design of the complete transition shows a simulated insertion loss below 1 dB and channel isolation higher than 40 dB over a fractional bandwidth of more than 20% in the frequency band of interest. A demonstrator was manufactured and characterized. Measurements of the demonstrator confirm our approach and accuracy of our models. Using low-loss materials, an insertion loss below 1 dB, and interchannel isolation better than 30 dB over the 76–81 GHz band can be achieved.

Low-Loss Plasmonics with Nanostructured Potassium and Sodium-Potassium Liquid Alloys.

Alkali metals have low optical losses in the visible to near-infrared (NIR) compared with noble metals. However, their high reactivity prohibits the exploration of their optical properties. Recently sodium (Na) has been experimentally demonstrated as a low-loss plasmonic material. Here we report on a thermo-assisted nanoscale embossing (TANE) technique for fabricating plasmonic nanostructures from pure potassium (K) and NaK liquid alloys. We show high-quality-factor resonances from K as narrow as 15 nm in the NIR, which we attribute to the high material quality and low optical loss. We further demonstrate liquid Na-K plasmonics by exploiting the Na-K eutectic phase diagram. Our study expands the material library for alkali metal plasmonics and liquid plasmonics, potentially enabling a range of new material platforms for active metamaterials and photonic devices.

An elastic luminescent organic single crystal with linear and nonlinear optical waveguide properties

In recent years, organic single crystals combining elastic and photoluminescent (PL) properties have attracted extensive attention due to their promising applications in many fields. However, elastic organic crystals with two-photon luminescence (2 PL) waveguiding properties are still rarely found, which is imperative for various applications, including near-infrared (NIR) bioimaging and nonlinear optical (NLO) photonic devices. This work reports an elastic single crystal with a long needle shape, anthracene-9,10-dicarbaldehyde (An-DC). Its crystal (100) face exhibits highly reversible bending by applying the mechanical force, which is facilitated by the van der Waals (C– H···π), H-bond (C–H⋯O), and π···π interactions among molecules. The crystal emits a strong orange-red fluorescence when excited by blue-violet light. Interestingly, it also exhibits excellent two-photon fluorescence emission when stimulated by near-infrared light. Based on these linear and nonlinear optical characteristics, the waveguide applications of the An-DC crystal were implemented. Notably, in the bending state, the luminescence performance and the crystal structure of the An-DC crystal are maintained well, which can be used as a low-loss material for linear and nonlinear optical waveguide devices, thus expanding the potential use of flexible organic crystals.

An electroluminescent and tunable cavity-enhanced carbon-nanotube-emitter in the telecom band

Emerging photonic information processing systems require chip-level integration of controllable nanoscale light sources at telecommunication wavelengths. Currently, substantial challenges remain in the dynamic control of the sources, the low-loss integration into a photonic environment, and in the site-selective placement at desired positions on a chip. Here, we overcome these challenges using heterogeneous integration of electroluminescent (EL), semiconducting carbon nanotubes (sCNTs) into hybrid two dimensional – three dimensional (2D-3D) photonic circuits. We demonstrate enhanced spectral line shaping of the EL sCNT emission. By back-gating the sCNT-nanoemitter we achieve full electrical dynamic control of the EL sCNT emission with high on-off ratio and strong enhancement in the telecommunication band. Using nanographene as a low-loss material to electrically contact sCNT emitters directly within a photonic crystal cavity enables highly efficient EL coupling without compromising the optical quality of the cavity. Our versatile approach paves the way for controllable integrated photonic circuits.

Phonon Polaritonics in Broad Terahertz Frequency Range with Quantum Paraelectric SrTiO3.

Photonics in the frequency range of 5-15terahertz (THz) potentially open a new realm of quantum materials manipulation and biosensing. This range, sometimes called "the new terahertz gap", is traditionally difficult to access due to prevalent phonon absorption bands in solids. Low-loss phonon-polariton materials may realize sub-wavelength, on-chip photonic devices, but typically operate in mid-infrared frequencies with narrow bandwidths and are difficult to manufacture on a large scale. Here, for the first time, quantum paraelectric SrTiO3 enables broadband surface phonon-polaritonic devices in 7-13THz. As a proof of concept, polarization-independent field concentrators are designed and fabricated to locally enhance intense, multicycle THz pulses by a factor of 6 and increase the spectral intensity by over 90 times. The time-resolved electric field inside the concentrators is experimentally measured by THz-field-induced second harmonic generation. Illuminated by a table-top light source, the average field reaches 0.5GVm-1 over a large volume resolvable by far-field optics. Theseresults potentially enable scalable THz photonics with high breakdown fields made of various commercially available phonon-polariton crystals for studying driven phases in quantum materials and nonlinear molecular spectroscopy.

Defect engineering in N-doped OMC for lightweight and high-efficiency electromagnetic wave absorption

Developing low density and efficient dielectric loss materials has become a research hotspot, which can greatly meet the demands of modern radars and settle the problem of electromagnetic wave pollution. Herein, a series of N-doped ordered mesoporous carbon (OMC) materials with different nitrogen content were prepared via a modified self-assembly method and defect engineering in subsequent calcination treatment. It was discovered that the content and type of nitrogen doping can be effectively modulated by the amount of precursor dicyandiamide, resulting in the changes in porous structure, carbon defects, electromagnetic properties, microwave absorption (MA) performance and radar cross section (RCS) reduction values. Remarkably, as-fabricated OMC/N2.5 displays ideal MA performance, whose minimum reflection loss (RL(min)) value reaches −35.3 dB at 7.76 GHz (3.0 mm) and its effective absorption bandwidth reaches 3.52 GHz (10.64–14.16 GHz, 2.0 mm). Furthermore, the optimal RCS reduction values can be obtained as 12.01 dB·m2 when the detection theta is 30°, which validly reduces the chances of being detected by radar. Thus, this work opens up a novel way for the development of lightweight and high-efficiency MA materials.

Defect-related broadband dielectric loss mechanisms of Na1/2Sm1/2Ti1–z(Al1/2Nb1/2)zO3 ceramics

Dielectric ceramics with low dielectric loss in the microwave bands are key materials used in fifth/sixth-generation (5G/6G) telecommunication. Exploring the defect behavior and the broadband dielectric response of ceramics is helpful to understand the loss mechanism and develop novel low-loss microwave dielectric ceramics. In this work, Al/Nb was co-substituted for Ti4+ in Na1/2Sm1/2TiO3 (NST) ceramics with a perovskite structure, and the low frequency, microwave and terahertz (THz) dielectric responses were investigated. In different frequency bands, the variations of dielectric loss with substitution amount are inconsistent. The Al/Nb-substitution increases the dielectric loss in the low frequency and microwave bands, while the dielectric loss in the THz band decreases. The changes in dielectric loss are closely related to the lattice defects in Na1/2Sm1/2Ti1–z(Al1/2Nb1/2)zO3 (NST-zAN, 0 ≤ z ≤ 0.1) ceramics, which are studied by thermally stimulated depolarization current (TSDC) technique. The dielectric relaxation of the defects including oxygen vacancies (VO··) and defect dipoles leads to the dielectric loss in the low-frequency and microwave bands. The dielectric loss in the THz band is mainly affected by the damping of lattice vibration, which is associate with the defect concentration. This work might provide a considerable reference for the development of low-loss dielectric materials.

A Novel Strategy for Detecting Permittivity and Loss Tangent of Low-Loss Materials Based on Cylindrical Resonant Cavity

Accurate measurement of the permittivity and loss tangent of low-loss materials is essential due to their special applications in the field of ultra large scale integrated circuits and microwave devices. In this study, we developed a novel strategy that can accurately detect the permittivity and loss tangent of low-loss materials based on a cylindrical resonant cavity supporting the TE111 mode in X band (8–12 GHz). Based on an electromagnetic field simulation calculation of the cylindrical resonator, permittivity is precisely retrieved by exploring and analyzing the perturbation of the coupling hole and sample size on the cutoff wavenumber. A more precise approach to measuring the loss tangent of samples with various thicknesses has been proposed. The test results of the standard samples verify that this method can accurately measure the dielectric properties of samples that have smaller sizes than the high Q cylindrical cavity method.

Multi-point scattering measurements for effective property extraction from metamaterials with skin effects

Scattering experiments can be leveraged to extract the effective properties of a heterogeneous metamaterial slab based on multi-point measurements in surrounding media. In this technique, two measurements are made in the ambient media on each side of a finite thickness micro-structured slab to decompose incoming and outgoing waves. The method is applied to an example with locally resonant micro-structured inclusions while paying close attention to parameters that influence the extracted material parameters. It is observed that the extracted overall parameters converge to limiting values when the number of unit cells across the slab thickness or ambient media modulus are increased. Dependence of extracted material parameters on the number of cells through thickness or ambient media properties are attributed to the different response of boundary (skin) and interior cells. A method is presented which represents a finite array with different effective properties for the skin regions vs. the interior regions with great success in reproducing the scattering for different slab thicknesses, and through which the interior regions properties become independent of ambient media properties. In stop bands with lower material loss, challenges arise that are associated with extremely small transmission. The assumption of continuity in transmission phase is enforceable to remove phase ambiguity, although in certain cases (associated with nearly lossless specimens) this assumption appears to fail. In such cases, interference from coupled shear modes may lead to apparent higher longitudinal transmission within the stop band. This work provides a proof of concept for the development of an experimental methodology capable of extracting the effective properties and dispersion behavior of heterogeneous mechanical metamaterials without any knowledge of the internal fields.

A Novel Parallel-Plate Dielectric Resonator Method for Broadband Complex Permittivity Measurement in the Millimeter-Wave Bands

This article proposes a novel measurement method based on parallel-plate dielectric resonator (PPDR) for determining complex permittivity of low-loss dielectric materials over a wide frequency range. Two 1.0-mm coaxial probes are placed symmetrically as a coupling structure in the center of top and bottom of the PPDR, and only the TM <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$_{\mathrm{0np}}$</tex-math> </inline-formula> resonant modes will be selectively excited. For each value of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$p$</tex-math> </inline-formula> , the resonator will operate over a specific frequency range, within which there are usually multiple frequency points available for testing. Based on this unique feature, dielectric constants of cylindrical or disk-shaped samples can be measured from less than 20 up to 110 GHz by utilizing TM <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$_{\mathrm{0np}}$</tex-math> </inline-formula> high-order modes. Rigorous analysis of the PPDR based on the electromagnetic field matching method is carried out and verified numerically. Moreover, the PPDR method is further validated experimentally by measuring several specimens processed from well-known materials, the main sources of measurement uncertainty are also analyzed in detail, and some recommendations are made accordingly. The results show that the PPDR method can perform high-accuracy measurement of complex permittivity in the millimeter-wave bands, even when the sample thickness exceeds the maximum value limited by the current state of the art.