Low Detection Limit Research Articles

Electrochemical Behaviour and Sensing of Chlorpromazine at Polymer‐Free Kaolin‐Based Nanosodalite and Nanosodalite‐Graphene Foam Film modified Glassy Carbon Electrodes

AbstractA nanosodalite (SOD) was synthesized utilizing Cameroonian kaolin and then used to prepare a nanocomposite (SOD‐GF) with graphene foam (GF). The as‐synthesized materials were characterized using X‐ray diffractometry (XRD), Fourier transform‐infrared (FT‐IR) spectroscopy, N2 adsorption‐desorption and scanning electron microscopy coupled with emission dispersive X‐ray (SEM/EDX). The results show a pure sodalite with high degree of crystallinity with crystallite size and BET surface area of 38.3 nm and 22 m2/g, respectively. The composite's characterization revealed a well‐integrated material in which the structural integrity of each material is maintained, its surface area being 4‐fold that of pristine SOD. Stable SOD and SOD‐GF modified glassy carbon electrode (GCE) were prepared by drop coating without a binder and utilized to study the electrochemistry of chlorpromazine (CPZ) in acidic, neutral and basic pHs. It appeared that (i) CPZ's electrochemical oxidation was a two‐step one‐electron process at SOD/GCE and a one‐step two‐electron process at SOD‐GF/GCE and (ii) the electrochemical reaction mechanism was an EEC mechanism at SOD/GCE while at SOD‐GF/GCE the mechanism was EEC at pH<4 and EC for greater pH. SOD/GCE and SOD‐GF/GCE were used to sense CPZ within CPZ's concentration ranging from 0.5‐30 μM with low detection limits.

Ionic liquids-based nanoemulsion for assisted by ultrasound liquid–liquid microextraction of UV-filters in water samples

Organic UV filters can contaminate various bodies of water such as streams, rivers, and seas, and as such, they have been identified as emerging contaminants of relevance in aquatic ecosystems. Therefore, the detection and determination of these compounds at low concentrations from an environmentally friendly perspective are necessary. In this work, an ionic liquids based nanoemulsion for the ultrasound assisted liquid–liquid microextraction (ILs-NE/US-LLME) of benzophenone-3, octocrylene, octisalate and octinoxate in different water bodies was reached. The material was based on a mixture of the ionic liquids 1,3-didecyl-2-methylimidazolium chloride and 1-butyl-3-methylimidazolium hexafluorophosphate, and the surfactant Triton X-100. The microextraction process was assisted by ultrasound and was performed using 475 µL of extractant solvent and 10.0 mL of sample, and an optimal preconcentration factor of 100 was achieved. The detection was performed by HPLC-UV in less than 5 min for all analytes. Low detection limits (lower than 2.0 µg L−1) and an optimal precision (RSD lower than 6.7 %) were obtained for the four UV filters. Different water samples (pool, stream, river, sea and a simulated sample) were analyzed and satisfactory recovery values were obtained in all cases (82–119 %). The method was fast (15 min−1) and it presented an optimal value of greenness (0.50) according to the AGREE metric. The extractant material was easily synthesized using a minimum amount of materials. The chromatographic procedure for separation and detection of the analytes was simple and fast. Moreover, the method was more environmentally friendly compared to previous work reported in the literature.

2D Materials in Advanced Electronic Biosensors for Point-of-Care Devices.

Since two-dimensionalal (2D) materials have distinct chemical and physical properties, they are widely used in various sectors of modern technologies. In the domain of diagnostic biodevices, particularly for point-of-care (PoC) biomedical diagnostics, 2D-based field-effect transistor biosensors (bio-FETs) demonstrate substantial potential. Here, in this review article, the operational mechanisms and detection capabilities of biosensing devices utilizing graphene, transition metal dichalcogenides (TMDCs), black phosphorus, and other 2D materials are addressed in detail. The incorporation of these materials into FET-based biosensors offers significant advantages, including low detection limits (LOD), real-time monitoring, label-free diagnosis, and exceptional selectivity. The review also highlights the diverse applications of these biosensors, ranging from conventional to wearable devices, underscoring the versatility of 2D material-based FET devices. Additionally, the review provides a comprehensive assessment of the limitations and challenges faced by these devices, along with insights into future prospects and advancements. Notably, a detailed comparison of FET-based biosensors is tabulated along with various other biosensing platforms and their working mechanisms. Ultimately, this review aims to stimulate further research and innovation in this field while educating the scientific community about the latest advancements in 2D materials-based biosensors.

Ionic Organic Network-based C3-symmetric@Triazine core as a selective Hg+2 sensor

ABSTRACT The C3-symmetry ionic polymer PPyTri has been designed with multi-walled carbon nanotubes (MWCNTs) or graphene nanoplatelets (GNPs) and studied as an ultrasensitive electrochemical sensor for trace Hg(II) detection. The synthesis approach incorporated attaching three pyridinium cationic components with chloride anions to the triazine core. The precursors, BPy, were synthesized using a condensation process involving 4-pyridine carboxaldehyde and focused nicotinic hydrazide. The polymer PPyTri was further modified with either MWCNTs or GNPs. The resulting ionic polymer PPyTri and its fabricated nanocomposites were characterized using infrared (IR), nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and powder X-ray diffraction (XRD). The analysis revealed that both the polymer and its nanocomposites have semi-crystalline structures. The electroactivity of the designed nanocomposites toward Hg + 2 ions revealed that among the nanocomposites and bare copolymer, the glassy carbon electrode (GCE) adapted with the PPyTri GNPs-5% exhibited the greatest current response over a wide range of Hg + 2 concentrations. The nanocomposite-modified electrode presented an excellent sensitivity of 83.33 µAµM − 1 cm − 2, a low detection limit of 0.033 nM, and a linear dynamic range of 0.1 nM to 0.01 mM (R2 = 0.9945).

Aptamer molecular gate functionalized mesoporous SiO2@MB controlled-release system for pollutant detection using Ti(Ⅲ) self-doped TiO2 NTs as active photoanode coupled with electrostatic modulation

Atrazine (ATZ) is a widely used herbicide that can cause serious harm to organisms and ecosystems. An immobilization-free photoelectrochemical (PEC) aptasensor has been herein developed for ATZ based on aptamer molecular gate functionalized mesoporous SiO2@MB controlled release system. Compared with traditional immobilization-based sensors, immobilization-free sensors (IFSs) avoid the modification of the recognition element on the electrode surface. Mesoporous SiO2 with large surface area and good biocompatibility can be used as nanocontainers to stably encapsulate the signal shuttle molecule methylene blue (MB). The bifunctional aptamer (APT) is used not only as the recognition element for ATZ but also as the signal switch to block or release MB. In the presence of ATZ, the specific recognition between ATZ and APT will cause the detachment of APT from the surface of SiO2, thus the molecular gate will open and release MB. Due to pH modulation, the positively charged MB can reach the surface of the negatively charged Ti(III) self-doped TiO2 NTs (Ti(III)–TiO2 NTs) electrode to act as an electron donor, which increases the photocurrent. The immobilization-free aptasensor has shown ultrasensitive detection of ATZ with a wide linear range from 1.0 pM to 100.0 nM and a low detection limit of 0.1 pM. In addition, the sensor has excellent selectivity, stability and anti-interference ability, and has been used in real water sample analysis successfully. This strategy has provided a new idea for the design of advanced immobilization-free PEC sensors for environmental pollutant detection.

Synergistic Effect of 3D/2D Vanadium Diselenide/Tungsten Diselenide Hybrid Materials: Electrochemical Detection of 5-Nitroquinoline a Hazard to the Aquatic Environment.

The development of multidimensional structured electrode materials with simple synthetic methods and their electrochemical sensing ability against environmental pollution is still a challenge. In this article, we propose a hybrid formed using multidimensional (3D/2D) vanadium diselenide microspheres and tungsten diselenide nanosheets (VSe2/WSe2) for the electrochemical detection of 5-nitroquinoline (5-NQ), a highly toxic and hazardous substance that is polluting aquatic life due to increasing industrial activities. The 3D/2D VSe2/WSe2 hybrids were prepared by a simple solvothermal method and their morphological and structural analysis was confirmed by various spectroscopy and analytical techniques such as powder X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy-energy dispersive X-ray spectroscopy, transmission electron microscopy, cyclic voltammetry, and differential pulse voltammetry. The proposed 3D/2D architecture showed a strong synergistic effect between the two components as well as high electrical conductivity. As a result, an increased peak current for the reduction and detection of 5-NQ was achieved compared to other modified and unmodified disposable screen-printed electrodes (SPE), such as bare SPE, VSe2/SPE, and WSe2/SPE. Under the optimized electrochemical conditions, VSe2/WSe2/SPE showed large linear response ranges (0.012-1053, 1183-3474 μM), a low detection limit (0.002 μM), good sensitivity along with good selectivity, and repeatability for the detection of 5-NQ. With this prominent electrochemical behavior, the VSe2/WSe2 electrode has clear potential to produce high-performance sensor devices.

Tailoring a Two-Dimensional Halide Perovskite Composed of the Secondary Amine Cation for Anisotropic X-ray Responses.

Two-dimensional (2D) metal-halide perovskites have shown broad application prospects in the field of optoelectronic detection. The presence of the natural quantum-well structure results in strong anisotropy of physical properties, while studies on anisotropic X-ray responses remain insufficient. Here, we present an intriguing anisotropy of X-ray-responsive behaviors in a 2D halide perovskite, (t-ACH)2(DMA)Pb2Br7 (1, where t-ACH is trans-4-(aminomethyl)cyclohexanecarboxylate and DMA is dimethylamine), in which the secondary amine DMA+ cation with a large ionic radius locates inside the perovskite cage to form inorganic frameworks. The alternative alignment of inorganic slabs and organic bilayers creates a typical quantum-well architecture, which accounts for the generation of photoelectronic anisotropy. High-quality crystals of 1 exhibit notable semiconducting properties with a large μτ product (1.9 × 10-4 cm2 V-1). Intriguingly, 1 has better X-ray detection sensitivity (∼569.9 μC Gyair-1 cm-2) along the in-plane direction, which is attributed to its excellent charge carrier transport performance in this direction. Conversely, the higher resistance stemming from the organic barrier results in a lower detection limit along the out-of-plane direction (∼78.1 nGyair s-1), much lower than the medical diagnostic criteria (∼5.5 μGyair s-1). This work might open up new possibilities for the creative use of hybrid perovskites in direct X-ray detection.

Amino‐Montmorillonite Crystalline Clay as Electrode Modifier for Electrochemical Detection of Ciprofloxacin in Presence of Cetyltrimethylammonium Bromide

AbstractThis research focused on harnessing amino‐functionalized montmorillonite (Mt) clay, achieved through the grafting of [3(2‐aminoethyl)amino]propyltrimethoxysilane (AEP‐TMS), as carbon paste electrode (CPE) modifier for the electroanalysis of ciprofloxacin (CF). The characterization of both Mt and the amino‐functionalized (Mt‐NH2) materials was carried out using various techniques including Fourier‐transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X‐ray diffraction (XRD). Afterwards, various CPEs modified using Mt and Mt‐NH2 were prepared and characterized employing SEM‐energy dispersive X‐ray (EDX), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). By EIS, Mt‐NH2‐CPE exhibited significantly faster electron transfer with lower charge‐transfer resistance (438.5 Ω) compared to Mt‐CPE (3572.1 Ω) and to the bare CPE (2066.1 Ω). Additionally, CV experiments performed by using redox probes demonstrated the excellent accumulation capability of [Fe(CN)6]3− ions on Mt‐NH2‐CPE surface. The Mt‐NH2‐CPE was subsequently applied using square wave voltammetry to determine CF in the presence of cetyltrimethylammonium bromide (CTAB), yielding an impressive linear range from 30 to 240 μM (R=0.999) and a low detection limit of 0.07 μM (23.2 μg L−1). The method exhibited stable and reproducible responses (RSD=3.25 %; n= 6) under optimized conditions. Following interference studies, the optimized method was effectively applied to quantify CF concentrations in pharmaceutical and water samples.

Innovative microfluidic thread electroanalytical device with automated injector: A simple, green and upgraded analytical platform for the fast and sensitive analysis of ferrous ions

Cotton thread-based microfluidic devices are attractive for analytical procedures due to advantages that include affordable cost, low consumption of reagents and minimal production of waste. The coupling of cotton-based devices to electrochemical detection, known as microfluidic thread electroanalytical device (µTED), has demonstrated vast potential. However, some aspects in the µTED concept can still be improved, such as sample injection, which, until now, has been performed exclusively with manual micropipettes. This conventional injection has some deficiencies that include the variability in the aspiration/dispensing rates and inconstancy in the position of the pipette during injections, which can impair the measurements. Here we propose a new approach to improve the injection step in µTEDs by using electronic pipettes, which we named as automated injection. This novel injection mode overcomes the aforementioned disadvantages of manual injection. Electronic pipettes control aspiration and dispensing volumes/rates electronically and offer better ergonomics. We developed a new 3D-printed platform that allows to attach the electronic pipette to the µTED and always perform injections at a fixed position, increasing reproducibility of measurements. To demonstrate the practical applicability, this approach was first utilized for analysis of ferrous ion in pharmaceutical supplements and environmental samples. The method presented a wide linear range (0.7 to 200 μmolL–1), low limit of detection (0.21 μmolL–1), good accuracy (recoveries between 96 and 103 %) and excellent precision (relative standard deviation (RSD) ≤ 3.3 %). Thus, automated injection can be a great advance and change the state-of-the-art regarding µTEDs.

An ESIPT + AIE based dual-response fluorescent probe for continuous detection of PhSH and HClO and visualization of PhSH-induced oxidative stress in living cells

As a valuable industrial chemical, thiophenol (PhSH) is poisonous, which can be easily absorbed by the human body, leading to many serious health issues. In addition, PhSH-triggered oxidative stress is considered to be related with the pathogenesis and toxicity of PhSH. Therefore, efficient methods for monitoring PhSH and ROS production induced by PhSH in living systems are very meaningful and desired. Herein, we reasonably developed a facile dual-response fluorescent probe (HDB-DNP) by incorporating the dinitrophenyl (DNP) group into a novel methylthio-substituted salicylaldehyde azine (HDB) with AIE and ESIPT features. The probe itself was non-fluorescent owing to the strong quenching effect of DNP group. In the presence of PhSH, HDB-DNP gave an intense red fluorescence (610 nm), which can rapidly switch to green fluorescence (510 nm) upon further addition of HClO, allowing the successive detection of PhSH and HClO in two well-separated channels. HDB-DNP proved to be a very promising dual-functional probe for rapid (PhSH: < 17 min; HClO: 10 s) and selective detection of PhSH and HClO in physiological conditions with low detection limit (PhSH: 13.8 nM; HClO: 88.6 nM). Inspired by its excellent recognition properties and low cytotoxicity, HDB-DNP was successfully applied for monitoring PhSH and PhSH-induced HClO generation in living cells with satisfactory results, which may help to better understand the pathogenesis of PhSH-related diseases.

Mesoporous CdO/CdGa2O4 microsphere for rapidly detecting triethylamine at ppb level

Developing fast, accurate and sensitive triethylamine gas sensors with low detection limits is paramount to ensure the safety of workers and the public. However, sensors based on single metal oxide materials still suffer from drawbacks such as low response sensitivity and long response and recovery times. To address these challenges, in this work, a series of mesoporous CdO/CdGa2O4 microspheres were synthesized. We optimized the sensor's sensing performance to triethylamine by fine-tuning the ratio of CdO to CdGa2O4. Among them, CdO:3CdGa2O4-based sensor demonstrates a rapid response time of 2 s to detect 100 ppm of triethylamine, with a high response value of 211 and exceptional selectivity. Furthermore, it exhibits a low detection limit of 20 ppb for triethylamine, making it suitable for practically testing fish freshness. Crucially, electron transfer between the heterojunctions increases the chemically adsorbed oxygen on the materials’ surface, thereby enhancing the sensor's response sensitivity to triethylamine. This discovery provides new insights and methodologies for the design of highly efficient triethylamine gas sensors.

Paper-supported polystyrene membranes for micro-solid phase extraction of date-rape drugs from urine: A sustainable analytical approach

BackgroundThe rapid development of micro-solid phase extraction (μ-SPE) procedures with new sorption materials, in particular, based on using natural materials, is currently reported. The production of these sorbents and the entire extraction procedure should support the implementation of Green Analytical Chemistry (GAC) principles. Promising materials are sorbents based on paper, which can be relatively easily modified, among others: by covering it with a polymer membrane. In this work, the practical application of paper-supported polystyrene used in the analysis of urine samples containing selected date-rape drugs (DRD) substances, and evaluation of the entire procedure using GAC metrics is presented. ResultsThe paper-supported polystyrene membranes were successfully fabricated and characterized. The successful polystyrene coating on the paper was confirmed through ATR-FTIR measurements, ensuring even coverage. The μ-SPE procedure using this material facilitated extraction with a throughput of approximately 120 samples per hour in just a few steps. Throughout the research, a mixture of 100 mM acetic acid:methanol:acetonitrile (70:15:15, v/v/v) was selected as an optimal background electrolyte for capillary electrophoresis – mass spectrometry analysis. Validation results of this method demonstrated its suitability, exhibiting good linearity (R2 > 0.95), low limits of detection (3.1–15 ng mL−1), acceptable precision (<15 %), and recovery for all tested analytes. Furthermore, the greenness evaluation conducted with six different metrics: AGREEprep, AGREE, ComplexGAPI, SPMS, hexagonal metric, and WAC indicated the overall eco-friendliness and sustainability of the method, with minor concerns regarding energy consumption. SignificanceThe use of cellulose paper with polystyrene membranes for μ-SPE provides a versatile and eco-friendly extraction method for detecting DRDs in urine samples. The presented work is an example of the use of GAC metrics in the evaluation of the analytical procedure. The optimized PT-μ-SPE/CE–MS method allows for minimized reagent usage and waste production. Moreover, the method proves to be sustainable and efficient for forensic toxicology analysis.

Evaluation of Cd, Hg, Pb, Zn and Ni in selected cosmetic products: risk assessment for human health

ABSTRACT The ICP-MS method was used to determine the concentrations of five heavy metals: Cadmium (Cd), lead (Pb), zinc (Zn), mercury (Hg), and nickel (Ni). A total of 36 samples of cosmetic products (makeup, eye shadow, and mascara) of various brands were chosen from those available in Riyadh, Saudi Arabia. Several analytical parameters, such as accuracy, precision, linearity, the lower limit of quantification (LOQ), and the lower limit of detection (LOD), were assessed to determine the validity of the proposed method. The determination of Cd, Pb, Zn, Hg, and Ni was verified for accuracy and precision. The results of the determination of studied heavy metals concentration in cosmetic samples reveal that, the concentrations of Cd, Pb, Zn, Hg and Ni ranged from 0.03–0.53, 10.28–107.01, 14.49–867.12, 1.75–6.45 and 4.22–31.36 µg/g, respectively. In all samples of cosmetic products, the concentrations of Cd and Hg were deemed to be within the normal range. However, the concentration of Pb was higher than the recommended value by the World Health Organization (WHO). Nickel concentration was measured with a detection limit lower than the WHO recommended level, but no suggested value for Zn, which is critical for mitochondria, was found. Health risks related to these metal intakes through dermal exposure pathways are assessed using the total hazard quotient (THQs), total hazard index (HI), chronic daily intake (CDI), and hazard quotient (HQ). Despite the low risks of cancer and non-cancer caused by using these cosmetic products, testing results for cancer and non-cancer risks for these products must be regularly examined. Therefore, constant monitoring of cosmetic products, particularly with regard to heavy metal contamination, should be implemented to maintain human safety and security.

A universal electrochemical sensor for detection of nucleic acids and protein based on host-guest recognition of β-cyclodextrin polymer

A novel electrochemical sensing approach was developed to detect DNA, RNA, and protein targets, utilizing the host–guest interaction between methylene blue (MB)-labeled probe and β-cyclodextrin-based nanocomposite (rGO/β-CDP). During the assay, the MB-labeled probe interacted with the corresponding target to form a probe/target complex. Due to steric hindrance, the formation of this complex reduced the amount of MB-labeled probes that can be captured by the β-cyclodextrin-based nanocomposite on the electrode surface, resulting in a measurable decrease in the electrochemical signal. Upon optimization, the sensing platform exhibited satisfactory analytical performance for three cancer-related model analytes: p53 DNA, microRNA-21 RNA, and thrombin protein, achieving low detection limits of 3.4 nM, 4.4 nM, and 5.7 pM, respectively. In this work, the electrochemical assay separates the detection process into two stages: target recognition in solution and signal transduction on the electrode surface. This fabrication effectively circumvents the issues associated with nonspecific conformational changes and the complicated probe installation procedures on electrode surfaces that are common in traditional sensing platforms. Integrating host–guest recognition with electrochemical assay, the developed approach not only advances the understanding of host–guest chemistry in sensor applications but also establishes a foundation for future innovations in the detection of biomarkers.

S-scheme heterojunction phthalocyanine/TiO2 photoelectrochemical sensor for innovative glutathione detection.

A novel photoelectrochemical sensor, employing an S-scheme heterojunction of phthalocyanine and TiO2 nanoparticles, has been developed to enable highly sensitive determination of glutathione. By integrating the favorable stability, environmental benignity, and electronic properties of the TiO2 matrix with the unique photoactivity of phthalocyanine species, the designed sensor presents a substantial linear dynamic range and a low detection limit for the quantification of glutathione. The sensitivity is attributed to efficient charge transfer and separation across the staggered heterojunction energy levels, which generates measurable photocurrent signals. Systematic variation of phthalocyanine content reveals an optimal composition that balances light harvesting capacity and electron-hole recombination rates. The incorporation of phosphotungstic acid (PTA) in sample preparation effectively minimizes interference from compounds like L-cysteine and others. Consequently, this leads to an improvement in accuracy through the reduction of impurity levels. Appreciable photocurrent enhancements are observed upon introduction of both oxidized and reduced glutathione at the optimized composite photoanode. Coupled with advantageous features of photoelectrochemical transduction such as simplicity, cost-effectiveness, and resistance to fouling, this sensor holds great promise for practical applications in complex biological media.

Composite "Crosslinked Polyvinyl Alcohol-Magnetite" as a Stimuli-Responsive Matrix for Optical Methods.

The preparation and application of the composite material "crosslinked polyvinyl alcohol-magnetite" as a sensitive matrix for use in digital colorimetry and optical micrometry methods are discussed. The material was synthesized in the form of spherical granules (for micrometry) and thin films (for digital colorimetry). The obtained composites were characterized by the registration of magnetization curves. It was shown that the amount of grown Fe3O4 particles in the polymer gel is in linear dependence with the iron salt concentrations in the impregnating solutions. The composite granules were applied to determining monosaccharides using optical micrometry. The optimal pH value for the total amount of monosaccharides' determination was 8.6. The study of the analytical response of composite granules and films performed with a low limit of detection (7.9 mmol/dm3) of both glucose and fructose and a possibility of the control of high alcohol contention in water media. The granules were used to determine the total carbohydrate content in samples of natural honey and syrups with high fructose contents, while the films were used to control the alcohol content in hand antiseptics. The results obtained are in good agreement with the data provided by the manufacturers.

Si, O-Codoped Carbonized Polymer Dots with High Chemiresistive Gas Sensing Performance at Room Temperature.

A new type of carbonized polymer dot was prepared by the one-step hydrothermal method of triethoxylsilane (TEOS) and citric acid (CA). The sensor made from carbonized polymer dots (CPDs) showed superior gas sensing performance toward ammonia at room temperature. The Si, O-codoped CPDs exhibited superior ammonia sensing performance at room temperature, including a low practical limit of detection (pLOD) of 1 ppm (Ra/Rg: 1.10, 1 ppm), short response/recovery time (30/36 s, 1 ppm), high humidity resistance (less than 5% undulation when changing relative humidity to 80 from 30%), high stability (less than 5% initial response undulation after 120 days), reliable repeatability, and high selectivity against other interferential gases. The gas sensing mechanism was investigated through control experiments and in situ FTIR, indicating that Si, O-codoping essentially improves the electron transfer capability of CPDs and synergistically dominates the superior ammonia sensing properties of the CPDs. This work presents a facile strategy for constructing novel high-performance, single-component carbonized polymer dots for gas sensing.

Conductometric n-butanol sensor based on Pt-loaded LaFeO3 with 3D hierarchical structure

In this work, platinum nanoparticles (NPs) were loaded on the surface of LaFeO3 by wet impregnation method. Various characterization methods were carried out to confirm the microstructure of the samples, and the results showed that the as-prepared LaFeO3 has a 3D hierarchical structure composed of 2D walls of nanoparticles. Gas sensing research shows that the response of the composite loaded with Pt is increased by 2.25 times, and the response/recovery time is reduced from 220 s/214 s to 146 s/131 s, which is a comprehensive reduction of 34 % and 39 %. The material has good selectivity, and the detection limit reaches 100 ppb∼1.38. This enhancement can be attributed primarily to two factors: the formation of a Schottky barrier between the Pt nanoparticles and LaFeO3, where Pt acts as a center of electronic sensitization with a negative charge on the (002) surface of LaFeO3; and the efficient adsorption of oxygen species. First-principle calculations were employed to investigate the adsorption energy of the n-butanol molecule and to identify the advantages of oxygen species adsorption sites on the Pt-LaFeO3 surface compared to LaFeO3 alone. This work not only offers a promising solution for n-butanol sensors with extremely low detection limits but also identifies the most likely forms of gas adsorption and adsorption sites through theoretical calculations, providing a theoretical foundation for the further development of similar sensors.

Fluorescence Sensing Properties of a Bibranched Cyanostilbene Derivative Containing -NH2 for Trace Water and Picric Acid Determination.

In order to design organic small molecule fluorescent materials with multiple sensing, a bibranched -NH2 modified cyanostilbene derivative (AM) was synthesized. It exhibits solvent and aggregation-induced emission effects, with a solid-state quantum yield of 28%, which is seven times higher than that in THF. The synthesized sample AM demonstrated high sensitivity to trace water via a fluorescence "turn-off" response, achieving a low detection limit of 0.41 µM in THF and 0.80 µM in EtOH. AM also exhibits a "turn-off" response to picric acid, attributed to the photo-induced electron transfer effect it induces. The recognition of picric acid by AM demonstrates specificity and resistance to interference from nitro explosives, with a detection limit of 300 ppb and a linear relationship (R2 = 0.9981) at the range of 0-4 equivalents AM. Such acid recognition can facilitate the design of qualitative test papers and safety inks. Additionally, AM can function as a temperature sensor with a linear relationship (R2 = 0.9976) within the temperature range of 25-110°C. Leveraging these unique characteristics, a series of methods were proposed for the direct quantitative determination of trace water in nonaqueous solvents, picric acid, and temperature.

A high-stable and fast-responsive lysosome-targeted probe for detection of endogenous and exogenous HClO in living cells and its application in zebrafish imaging

HClO plays a vital role in the process of lysosome degradation of harmful substances within cells, thus it is urgently needed to develop a powerful imaging tool for detecting HClO in lysosomes. Herein, morpholine was introduced into 1,8-naphthoimide fluorophore as a lysosome targeting unit, and the 3-position of naphthalimide was modified with oxime moiety (CNOH) to synthesize a probe Nap-HClO for the detection of lysosomal HClO. The detection of HClO by Nap-HClO had been studied through theoretical calculations, which well verified the sensing mechanism of the probe. A comparison between the calculation results and experimental data revealed a close correlation between the two, indicating that Nap-HClO possesses theoretically predictable properties for HClO detection. In experiments on endogenous and exogenous HClO in cellular lysosomes, as well as exogenous HClO in zebrafish, Nap-HClO successfully monitored HClO. Nap-HClO exhibited high selectivity, rapid response (<1 min), low detection limit (∼6.8 × 10−6 M), and excellent stability in HClO detection, making it an excellent tool for detecting lysosomal HClO in organisms.