Low Accuracy Research Articles

Methods for online calibration of Q-matrix and item parameters for polytomous responses in cognitive diagnostic computerized adaptive testing.

The ability to rapidly provide examinees with detailed and effective diagnostic information is a critical topic in psychology. Knowing what diagnostic criteria the examinees have met enables the practitioner to seek the solution to help them in a timely manner, and this can be achieved by cognitive diagnostic computerized adaptive testing (CD-CAT). However, the pervasive challenge of replenishing items in the CD-CAT item bank limits its practical application. Online calibration is a means to address item replenishment, but in CD-CAT, most existing online calibration methods that jointly calibrate the Q-matrix and item parameters of the new items are developed only for dichotomous responses and are time-consuming. Notably, previous studies pay no attention to polytomously scored items that are frequently observed in testing, even though they can offer additional evidence for the examinees' diagnosis. To fill this gap, we propose a SCAD-based method (SCAD-EM) to calibrate the Q-matrix and item parameters of the new items with polytomous response data in order to promote the application of CD-CAT in practice. The performance of the SCAD-EM was investigated in two comprehensive simulation studies and compared against the revised single-item estimation method (SIE-BIC). Results indicated that the SCAD-EM produces a higher calibration accuracy for the category-level Q-matrix and is computationally more efficient across all conditions, but it produces a lower calibration accuracy for the item-level Q-matrix. An empirical study further demonstrated the utility of the SCAD-EM and the SIE-BIC methods in calibrating new items with a real dataset. The advantages of the proposed method, its limitations, and possible future research directions are offered at the end.

A fault diagnosis method for analog circuits based on EEMD-PSO-SVM

Analog circuit is an crucial component of electronic equipment, and the ability to diagnose its fault state quickly and accurately is essential for ensuring the safety and reliability of these electronic equipment. This paper addresses the problems of low diagnostic accuracy and the difficulties associated with model parameter selection in traditional fault diagnosis methods, particularly when dealing with nonlinear and non-stationary fault signals. A fault diagnosis method for analog circuits is proposed, which utilizes Ensemble Empirical Mode Decomposition (EEMD) for features extraction, the Maximum Information Coefficient algorithm (MIC) for features selection, and Particle Swarm Optimization (PSO) for optimizing Support Vector Machine (SVM) classification. Firstly, EEMD is used to adaptively decompose the fault signals in the circuit to extract multi-scale fault features. Secondly, the extracted features are quantitatively evaluated using the Pearson correlation coefficient and energy value analysis, leading to the construction of a fault feature vector is constructed. On this basis, the MIC feature selection algorithm is applied to further optimize the feature vector. Finally, an efficient fault classification model is developed by optimizing the hyperparameters of the SVM model using PSO. The simulation results show that the proposed method effectively overcome the problems of model complexity and low classification accuracy caused by improper selection of wavelet basis function. The accuracy of fault diagnosis and the efficiency of model training are significantly superior to those of traditional methods.

Arrayed ultrasonic wind speed and direction measurement based on the BNF-FLOC-MUSIC algorithm

An arrayed ultrasonic wind measurement method based on the BNF-FLOC-MUSIC algorithm is proposed to address the issue of low measurement accuracy and poor noise suppression capabilities of current array wind measurement methods in impulse noise backgrounds. The proposed method utilizes an array structure consisting of one transmitting ultrasonic sensor and five receiving sensors. Continuous sampling is performed leveraging this structure, and the received array signals are processed using a bounded nonlinear function (BNF). Subsequently, the fractional lower-order covariance (FLOC) operations are applied to suppress impulse noise’s influence further. Finally, combining these steps with the Multiple Signal Classification (MUSIC) algorithm enables high-precision wind speed and direction measurement. The effectiveness and superiority of the method are examined through simulation experiments and actual measurement systems, and the errors of wind speed and wind direction angle in actual measurement are 1.2% and 2°, respectively, which satisfy the design requirements of the ultrasonic anemometer.

YOLO-BFRV: An Efficient Model for Detecting Printed Circuit Board Defects

The small area of a printed circuit board (PCB) results in densely distributed defects, leading to a lower detection accuracy, which subsequently impacts the safety and stability of the circuit board. This paper proposes a new YOLO-BFRV network model based on the improved YOLOv8 framework to identify PCB defects more efficiently and accurately. First, a bidirectional feature pyramid network (BIFPN) is introduced to expand the receptive field of each feature level and enrich the semantic information to improve the feature extraction capability. Second, the YOLOv8 backbone network is refined into a lightweight FasterNet network, reducing the computational load while improving the detection accuracy of minor defects. Subsequently, the high-speed re-parameterized detection head (RepHead) reduces inference complexity and boosts the detection speed without compromising accuracy. Finally, the VarifocalLoss is employed to enhance the detection accuracy for densely distributed PCB defects. The experimental results demonstrate that the improved model increases the mAP by 4.12% compared to the benchmark YOLOv8s model, boosts the detection speed by 45.89%, and reduces the GFLOPs by 82.53%, further confirming the superiority of the algorithm presented in this paper.

A novel solar radiation forecasting model based on time series imaging and bidirectional long short‐term memory network

AbstractThe instability of solar energy is the biggest challenge to its successful integration with modern power grids, and accurate prediction of long‐term solar radiation can effectively solve this problem. In this study, we proposed a novel long‐term solar radiation prediction model based on time series imaging and bidirectional long short‐term memory network. First, inspired by the computer vision algorithm, the recursive graph algorithm is used to transform the one‐dimensional time series into two‐dimensional images, and then convolutional neural network is used to extract the features from the images, thus, the deeper features in the original solar radiation data can be mined. Second, to solve the problem of low accuracy of long‐term solar radiation prediction, a hybrid model BiLSTM‐Transformer is used to predict long‐term solar radiation. The hybrid prediction model can capture the long‐term dependencies, thereby further improving the accuracy of the prediction model. The experimental results show that the hybrid model proposed in this study is superior to other single models and hybrid models in long‐term solar radiation prediction accuracy. The accuracy and stability of the hybrid model are verified by many tests.

Robust knowledge transfer for bearing diagnosis in neural network models using multilayer maximum mean discrepancy loss function

Abstract This paper introduces a robust transfer learning method to enhance bearing diagnosis, particularly in cross-machine scenarios. The method trains a shallow neural network using labeled data from a different machine and unlabeled data from the target monitoring machine. To facilitate effective knowledge transfer, a multilayer maximum mean discrepancy loss function is employed, enabling the model to adapt learned features from the source machine to the target machine’s unlabeled data. This approach addresses the challenges of low accuracy and robustness often seen in transfer learning, especially when dealing with different machines. Experiments conducted on the Hanoi University of Science and Technology bearing dataset validate the effectiveness of the proposed method. The results show significant improvements in prediction accuracy and robustness, making this method superior to existing transfer learning models for cross-machine bearing diagnosis.

A novel optimal temporal lag air2stream model using dynamic time series matching

ABSTRACT In order to solve the problem that the current air2stream model does not consider the lag change of water temperature, this paper proposes a new method that combines empirical mode decomposition, power spectral density and dynamic time warping algorithm to determine the optimal time lag parameters, and then constructs the air2stream with the optimal time lag (a2swtl). Finally, the effectiveness and stability of the new method and model were verified based on the measured data from 2020-2022 at three hydrological stations in the middle and lower reaches of the Yangtze River that are close to natural river conditions. The results show that the new method overcomes the problem of low accuracy in determining the time lag of the existing correlation coefficient method. Compared with the original model, a2swtl has better stability without introducing additional observation data, and the average prediction accuracy is improved by about 6.33%. 8.36% and 15.4%.

Precision estimation of winter wheat crop height and above-ground biomass using unmanned aerial vehicle imagery and oblique photoghraphy point cloud data

IntroductionCrop height and above-ground biomass (AGB) serve as crucial indicators for monitoring crop growth and estimating grain yield. Timely and accurate acquisition of wheat crop height and AGB data is paramount for guiding agricultural production. However, traditional data acquisition methods suffer from drawbacks such as time-consuming, laborious and destructive sampling.MethodsThe current approach to estimating AGB using unmanned aerial vehicles (UAVs) remote sensing relies solely on spectral data, resulting in low accuracy in estimation. This method fails to address the ill-posed inverse problem of mapping from two-dimensional to three-dimensional and issues related to spectral saturation. To overcome these challenges, RGB and multispectral sensors mounted on UAVs were employed to acquire spectral image data. The five-directional oblique photography technique was utilized to construct the three-dimensional point cloud for extracting crop height.Results and DiscussionThis study comparatively analyzed the potential of the mean method and the Accumulated Incremental Height (AIH) method in crop height extraction. Utilizing Vegetation Indices (VIs), AIH and their feature combinations, models including Random Forest Regression (RFR), eXtreme Gradient Boosting (XGBoost), Gradient Boosting Regression Trees (GBRT), Support Vector Regression (SVR) and Ridge Regression (RR) were constructed to estimate winter wheat AGB. The research results indicated that the AIH method performed well in crop height extraction, with minimal differences between 95% AIH and measured crop height values were observed across various growth stages of wheat, yielding R2 ranging from 0.768 to 0.784. Compared to individual features, the combination of multiple features significantly improved the model’s estimate accuracy. The incorporation of AIH features helps alleviate the effects of spectral saturation. Coupling VIs with AIH features, the model’s R2 increases from 0.694-0.885 with only VIs features to 0.728-0.925. In comparing the performance of five machine learning algorithms, it was discovered that models constructed based on decision trees were superior to other machine learning algorithms. Among them, the RFR algorithm performed optimally, with R2 ranging from 0.9 to 0.93.ConclusionIn conclusion, leveraging multi-source remote sensing data from UAVs with machine learning algorithms overcomes the limitations of traditional crop monitoring methods, offering a technological reference for precision agriculture management and decision-making.

Effects of acute stress on biological motion perception.

Biological motion perception is an essential part of the cognitive process. Stress can affect the cognitive process. The present study explored the intrinsic ERP features of the effects of acute psychological stress on biological motion perception. The results contributed scientific evidence for the adaptive behavior changes under acute stress. After a mental arithmetic task was used to induce stress, the paradigm of point-light displays was used to evaluate biological motion perception. Longer reaction time and lower accuracy were found in the inverted walking condition than in the upright walking condition, which was called the "inversion effect". The P2 peak amplitude and the LPP mean amplitude were significantly higher in the local inverted perception than in the local upright walking condition. Compared to the control condition, the stress condition induced lower RT, shorter P1 peak latency of biological motion perception, lower P2 peak amplitude and LPP mean amplitude, and higher N330 peak amplitude. There was an "inversion effect" in biological motion perception. This effect was related to the structural characteristics of biological motion perception but unrelated to the state of acute psychological stress. Acute psychological stress accelerated the reaction time and enhanced attention control of biological motion perception. Attention resources were used earlier, and less attentional investment was made in the early stage of biological motion perception processing. In the late stage, a continuous weakening of inhibition was shown in the parieto-occipital area.

Research on Machining Quality Prediction Method Based on Machining Error Transfer Network and Grey Neural Network

Machining quality prediction is the critical link of quality control in parts machining. With the advent of the Industry 4.0 era, intelligent manufacturing and data-driven technologies bring new ideas for quality control in complex machining processes. Quality control is complicated for multi-process, multi-condition, small-batch, and high-precision parts processing requirements. To solve this problem, this paper proposes a machining quality prediction method based on the machining error transfer network and the grey neural network. Initially, by constructing a processing error transfer network, the error transfer law in part processing is described, and the PageRank algorithm and the influence degree of the nodes are used to determine the critical quality features. Additionally, the problem of low prediction accuracy due to small sample data and multiple coupling relationships is solved using the grey neural network algorithm, and a high accuracy prediction of critical quality features is achieved. Finally, the effectiveness and reliability of the method are verified by the case of medium-speed marine diesel engine fuselage processing. The results indicate that this method not only effectively identifies critical quality features in the machining process of complex parts, but it also maintains a high predictive accuracy for these features, even with small samples and limited data.

Explainable deep learning approach for advanced persistent threats (APTs) detection in cybersecurity: a review

In recent years, Advanced Persistent Threat (APT) attacks on network systems have increased through sophisticated fraud tactics. Traditional Intrusion Detection Systems (IDSs) suffer from low detection accuracy, high false-positive rates, and difficulty identifying unknown attacks such as remote-to-local (R2L) and user-to-root (U2R) attacks. This paper addresses these challenges by providing a foundational discussion of APTs and the limitations of existing detection methods. It then pivots to explore the novel integration of deep learning techniques and Explainable Artificial Intelligence (XAI) to improve APT detection. This paper aims to fill the gaps in the current research by providing a thorough analysis of how XAI methods, such as Shapley Additive Explanations (SHAP) and Local Interpretable Model-agnostic Explanations (LIME), can make black-box models more transparent and interpretable. The objective is to demonstrate the necessity of explainability in APT detection and propose solutions that enhance the trustworthiness and effectiveness of these models. It offers a critical analysis of existing approaches, highlights their strengths and limitations, and identifies open issues that require further research. This paper also suggests future research directions to combat evolving threats, paving the way for more effective and reliable cybersecurity solutions. Overall, this paper emphasizes the importance of explainability in enhancing the performance and trustworthiness of cybersecurity systems.

Multi-feature fusion dehazing based on CycleGAN

Under the foggy environment, lane line images are obscured by haze, which leads to lower detection accuracy, higher false detection of lane lines. To address the above problems, a multi-layer feature fusion dehazing network based on CycleGAN architecture is proposed. Firstly, the foggy image is enhanced to remove the fog in the image, and then the lane line detection network is used for detection. For the dehazing network, a multi-layer feature fusion module is used in the generator to fuse the features of different coding layers of U-Net to enhance the network’s recovery of information such as details and edges, and a frequency domain channel attention mechanism is added at the key nodes of the network to enhance the network’s attention to different fog concentrations. At the same time, to improve the discriminant effect of the discriminator, the discriminator is extended to a global and local discriminator. The experimental results show that the dehaze effect on Reside and other test data sets is better than the comparison method. The peak signal-to-noise ratio is improved by 2.26 dB compared to the highest GCA-Net algorithm. According to the lane detection of fog images, it is found that the proposed network improves the accuracy of lane detection on foggy days.

Handwritten Character Recognition using Enhanced Artificial Neural Network

This study addresses the concerns regarding the performance of Handwritten Character Recognition (HCR) systems, focusing on the classification stage. It is widely acknowledged that the development of the classification model significantly impacts the overall performance of HCR. The problems identified specifically pertain to the classification model, particularly in the context of the Artificial Neural Network (ANN) learning problem, leading to low accuracy in recognizing handwritten characters. The objective of this study is to improve and refine the ANN classification model to achieve better HCR. To achieve this goal, this study proposed a hybrid Flower Pollination Algorithm with Artificial Neural Network (FPA-ANN) classification model for HCR. The FPA is one of the metaheuristic approaches is utilized as an optimization technique to enhance the performance of ANN, particularly by optimizing the network training process of ANN. The experimentation phase involves using the National Institute of Standards and Technology (NIST) handwritten character database. Finally, the proposed FPA-ANN classification model is analyzed based on generated confusion matrix and evaluated performance of the classification model in terms of precision, sensitivity, specificity, F-score and accuracy.

Shielding networks: enhancing intrusion detection with hybrid feature selection and stack ensemble learning

The frequent usage of computer networks and the Internet has made computer networks vulnerable to numerous attacks, highlighting the critical need to enhance the precision of security mechanisms. One of the most essential measures to safeguard networking resources and infrastructures is an intrusion detection system (IDS). IDSs are widely used to detect, identify, and track malicious threats. Although various machine learning algorithms have been used successfully in IDSs, they are still suffering from low prediction performances. One reason behind the low accuracy of IDSs is that existing network traffic datasets have high computational complexities that are mainly caused by redundant, incomplete, and irrelevant features. Furthermore, standalone classifiers exhibit restricted classification performance and typically fail to produce satisfactory outcomes when dealing with imbalanced, multi-category traffic data. To address these issues, we propose an efficient intrusion detection model, which is based on hybrid feature selection and stack ensemble learning. Our hybrid feature selection method, called MI-Boruta, combines mutual information (MI) as a filter method and the Boruta algorithm as a wrapper method to determine optimal features from our datasets. Then, we apply stacked ensemble learning by using random forest (RF), Catboost, and XGBoost algorithms as base learners with multilayer perceptron (MLP) as meta-learner. We test our intrusion detection model on two widely recognized benchmark datasets, namely UNSW-NB15 and CICIDS2017. We show that our proposed IDS outperforms existing IDSs in almost all performance criteria, including accuracy, recall, precision, F1-Score, false positive rate, true positive rate, and error rate.

G-YOLO: A Lightweight Infrared Aerial Remote Sensing Target Detection Model for UAVs Based on YOLOv8

A lightweight infrared target detection model, G-YOLO, based on an unmanned aerial vehicle (UAV) is proposed to address the issues of low accuracy in target detection of UAV aerial images in complex ground scenarios and large network models that are difficult to apply to mobile or embedded platforms. Firstly, the YOLOv8 backbone feature extraction network is improved and designed based on the lightweight network, GhostBottleneckV2, and the remaining part of the backbone network adopts the depth-separable convolution, DWConv, to replace part of the standard convolution, which effectively retains the detection effect of the model while greatly reducing the number of model parameters and calculations. Secondly, the neck structure is improved by the ODConv module, which adopts an adaptive convolutional structure to adaptively adjust the convolutional kernel size and step size, which allows for more effective feature extraction and detection based on targets at different scales. At the same time, the neck structure is further optimized using the attention mechanism, SEAttention, to improve the model’s ability to learn global information of input feature maps, which is then applied to each channel of each feature map to enhance the useful information in a specific channel and improve the model’s detection performance. Finally, the introduction of the SlideLoss loss function enables the model to calculate the differences between predicted and actual truth bounding boxes during the training process, and adjust the model parameters based on these differences to improve the accuracy and efficiency of object detection. The experimental results show that compared with YOLOv8n, the G-YOLO reduces the missed and false detection rates of infrared small target detection in complex backgrounds. The number of model parameters is reduced by 74.2%, the number of computational floats is reduced by 54.3%, the FPS is improved by 71, which improves the detection efficiency of the model, and the average accuracy (mAP) reaches 91.4%, which verifies the validity of the model for UAV-based infrared small target detection. Furthermore, the FPS of the model reaches 556, and it will be suitable for wider and more complex detection task such as small targets, long-distance targets, and other complex scenes.

Contextual diversity and anchoring: Null effects on learning word forms and opposing effects on learning word meanings.

Words that appear in many contexts/topics are recognised faster than those occurring in fewer contexts. However, contextual diversity benefits are less clear in word learning studies. Mak et al. proposed that diversity benefits might be enhanced if new word meanings are anchored before introducing diversity. In our study, adults (N = 288) learned meanings for eight pseudowords, four experienced in six topics (high diversity) and four in one topic (low diversity). All items were first experienced five times in one topic (anchoring phase), and results were compared to Norman et al. which used a similar paradigm without an anchoring phase. An old-new decision post-test (did you learn this word?) showed null effects of contextual diversity on written form recognition accuracy and response time, mirroring Norman et al. A cloze task involved choosing which pseudoword completed a sentence. For sentences situated in a previously experienced context, accuracy was significantly higher for pseudowords learned in the low diversity condition, whereas for sentences situated in a new context, accuracy was non-significantly higher for pseudowords learned in the high diversity condition. Anchoring modulated these effects. Low diversity item accuracy was unaffected by anchoring. However, for high-diversity items, accuracy in familiar contexts was better in the current experiment (anchoring) than in Norman et al. (non-anchoring), but accuracy in new contexts did not differ between the two experiments. These results suggest that anchoring facilitates meaning use in familiar contexts, but not generalisation to new contexts, nor word recognition in isolation.

Effects of personality traits and mood induction on metamemory judgments and metacognitive beliefs

Although the effects of mood and personality traits on memory performance have previously been studied, their relationship to the metamemory and metacognitive processes is still unknown. In this study, we investigated the effects of mood induction (positive and negative) and personality traits (extroverted and neurotics) on metacognitive beliefs, memory confidence, the judgment of learning (JOL) and feeling of knowing (FOK) judgments during face-name recognition tasks. One hundred twenty-seven participants who met the criteria based on their extraverted and neurotic personality scores on the Big Five Personality Inventory were randomly assigned to positive and negative mood induction conditions. We found that neurotics showed lower JOL judgments and accuracy than extroverts. The interaction effect between mood and personality significantly affected JOL and FOK accuracy, indicating that while extraverts were more accurate during positive induction, neurotics were more accurate during negative induction. In addition, neurotics were underconfident in their memory and reported more negative metacognitive beliefs than extroverts. We concluded that memory and metamemory processes are distinguishable in their relationships with mood states and personality traits. Our data also showed that JOL and FOK are distinct processes that support domain-specific metacognitive judgments.

Prediction and spatial–temporal changes of soil organic matter in the Huanghuaihai Plain by combining legacy and recent data

Soil organic matter (SOM) is critical for soil fertility, crop growth, and plays an important role in the global carbon cycle and climate change. Therefore, spatial prediction of SOM is important to rational soil resource utilization, agricultural production, and ecological environment management. However, large-area SOM mapping research heavily relies on legacy soil data, and large-scale recent SOM mapping may not be possible or have lower accuracy due to limited or less recent data availability. In this study, we aimed to improve SOM prediction and mapping accuracy by combining legacy data with limited recent data. Three models, namely, partial least squares regression (PLSR), random forest (RF), and one-dimensional convolutional neural network (1D-CNN), were applied and compared. The results showed that combining legacy and recent data effectively improved SOM prediction accuracy compared to using only recent data. Among the three modeling methods, 1D-CNN exhibited superior performance, with an averaged determination coefficient of the prediction (R2) of 0.58, a root mean square error (RMSE) of 4.56 g/kg, and a ratio of performance to interquartile distance (RPIQ) of 2.05. The predicted SOM content for both legacy (1980 s) and recent (2010 s) periods showed similar spatial distribution patterns throughout the Huanghuaihai Plain. Generally, there was a noticeable trend of increasing SOM content from northwest to southeast, with higher values observed in Jiangsu and lower values concentrated in Henan, Hebei, and Shandong regions within the study area. Over time, SOM contents in the Huanghuaihai Plain showed an increasing trend, with an average increase of 5.90 g/kg from legacy to recent period. This study provides a promising approach for improving SOM prediction and mapping accuracy at large scales, particularly when recent data availability is limited.

MIDF-DMAP: Multimodal information dynamic fusion for drug molecule activity prediction

BackgroundComputer-aided drug development can alleviate limitations in drug research and development processes, such as long cycles, high costs, and limited targeting. Deep learning models can be used to predict the activity of drug compound molecules. However, existing models still need to adequately address semantic redundancy, conflicts, and noise between different data modalities. It results in low accuracy in predicting molecular activity and many false positive results that need further resolution. ObjectiveThis study aims to design a parallel deep learning model for processing multimodal molecular information fusion, dynamically adjusting the weights of different modal features during the fusion process. This approach ensures that high-quality modal information is more significant in molecular activity prediction, improving the model’s predictive accuracy. MethodsFirst, three modal features of drug molecules are extracted: one-dimensional fingerprints, two-dimensional topological structures, and three-dimensional geometric structures. Then, a dynamic weighting mechanism is proposed to fuse these three modal features organically. Finally, the fused features are input into the model classifier to obtain molecular activity prediction results. ResultsExperimental results show that the proposed model improved the Receiver Operating Characteristic-Area Under the Curve (ROC-AUC) value by 29.96% compared to the Weave model and 26.38% compared to the GC model on the BBBP dataset. Compared to the GraphMVP model and the multi-channel substructure graph model MSGG, the ROC-AUC value increased by 20.44% and 15.80%, respectively. This method also achieved good results on imbalanced samples and small molecule datasets. ConclusionThis study provides an effective multimodal dynamic fusion method for virtual drug screening, enriching computer-aided drug development theory and improving drug research and development efficiency.

Exploring Estimation Procedures for Reducing Dimensionality in Psychological Network Modeling.

To understand psychological data, it is crucial to examine the structure and dimensions of variables. In this study, we examined alternative estimation algorithms to the conventional GLASSO-based exploratory graph analysis (EGA) in network psychometric models to assess the dimensionality structure of the data. The study applied Bayesian conjugate or Jeffreys' priors to estimate the graphical structure and then used the Louvain community detection algorithm to partition and identify groups of nodes, which allowed the detection of the multi- and unidimensional factor structures. Monte Carlo simulations suggested that the two alternative Bayesian estimation algorithms had comparable or better performance when compared with the GLASSO-based EGA and conventional parallel analysis (PA). When estimating the multidimensional factor structure, the analytically based method (i.e., EGA.analytical) showed the best balance between accuracy and mean biased/absolute errors, with the highest accuracy tied with EGA but with the smallest errors. The sampling-based approach (EGA.sampling) yielded higher accuracy and smaller errors than PA; lower accuracy but also lower errors than EGA. Techniques from the two algorithms had more stable performance than EGA and PA across different data conditions. When estimating the unidimensional structure, the PA technique performed the best, followed closely by EGA, and then EGA.analytical and EGA.sampling. Furthermore, the study explored four full Bayesian techniques to assess dimensionality in network psychometrics. The results demonstrated superior performance when using Bayesian hypothesis testing or deriving posterior samples of graph structures under small sample sizes. The study recommends using the EGA.analytical technique as an alternative tool for assessing dimensionality and advocates for the usefulness of the EGA.sampling method as a valuable alternate technique. The findings also indicated encouraging results for extending the regularization-based network modeling EGA method to the Bayesian framework and discussed future directions in this line of work. The study illustrated the practical application of the techniques to two empirical examples in R.