Long-term Studies Research Articles

Are Open Science instructions targeted to ecologists and evolutionary biologists sufficient? A literature review of guidelines and journal data policies.

Open science (OS) awareness and skills are increasingly becoming an essential part of everyday scientific work as e.g., many journals require authors to share data. However, following an OS workflow can seem challenging at first. Thus, instructions by journals and other guidelines are important. But how comprehensive are they in the field of ecology and evolutionary biology (Ecol Evol)? To find this out, we reviewed 20 published OS guideline articles aimed for ecologists or evolutionary biologists, together with the data policies of 17 Ecol Evol journals to chart the current landscape of OS guidelines in the field, find potential gaps, identify field-specific barriers for OS and discuss solutions to overcome these challenges. We found that many of the guideline articles covered similar topics, despite being written for a narrow field or specific target audience. Likewise, many of the guideline articles mentioned similar obstacles that could hinder or postpone a transition to open data sharing. Thus, there could be a need for a more widely known, general OS guideline for Ecol Evol. Following the same guideline could also enhance the uniformity of the OS practices carried on in the field. However, some topics, like long-term experiments and physical samples, were mentioned surprisingly seldom, although they are typical issues in Ecol Evol. Of the journals, 15 out of 17 expected or at least encouraged data sharing either for all articles or under specific conditions, e.g. for registered reports and 10 of those required data sharing at the submission phase. The coverage of journal data policies varied greatly between journals, from practically non-existing to very extensive. As journals can contribute greatly by leading the way and making open data useful, we recommend that the publishers and journals would invest in clear and comprehensive data policies and instructions for authors.

Stick-and-sensing microneedle patch for personalized nutrition management

The focus of the next-generation healthcare system has moved forward from single disease detection to comprehensive health interpretation, namely, from disease diagnosis to prophylaxis via the early management of sub-health status. Among the technologies, microneedles have emerged as an efficient and powerful tool to realize painless and real-time sensing in the interstitial fluid (ISF), offering promising solutions for dynamic and direct reflection of nutritional profiles. Herein, we present a film-like, multifunctional microneedle patch, that is composed of three laser-induced graphene (LIG) based electrodes for minimally invasive and timely detection of glucose and vitamin C in the ISF. The microneedle patch is simply fabricated with a thickness of ~0.25mm polyimide (PI) film by a commercial laser platform, where laser-engraving is operated to form graphene electrodes, and laser-cutting accounts for the needle-tip shaping. Such fast, low-cost, and scalable manufactured microneedle patches showed excellent performance for electrochemical sensing and therefore allowed reliable on-the-tip monitoring of changes in glucose and vitamin C levels. Long-term studies in vivo and demonstrations in planta indicated the great promise of our microneedle patch to revolutionize dietary guidelines based on individualized status for effective nutrition management.

Little prairie under the panel: testing native pollinator habitat seed mix establishment at three utility-scale solar sites in Minnesota

As more land is being utilized for large-scale solar energy projects, there are increasing discussions from stakeholders on how to utilize land under solar panels to promote biodiversity. One path is to plant habitat beneficial to pollinators and other insects, but there have been few long-term studies that examine how different vegetation and seed mixes establish underneath solar panels. This study addresses a scientific gap to determine whether native pollinator seed mixes successfully establish over time under solar arrays using a systematic assessment of eight seed mixes planted at three utility-scale solar sites in Minnesota. We assess establishment with a percent native coverage metric, which is an assessment of native species observations compared to total observations during percent cover analyses in our vegetative test plots. The percent native coverage metric allows for a measurement of how the seed mix established and how the seed mix persists over time. The percent native coverage under and in between the solar photovoltaic (PV) arrays rose from 10% after one year of planting to 58% after three years across all sites, while the native coverage of the full sun control area rose from 9.6% to 70% under the same period, showing that native prairie and pollinator plants successfully established under the array, although to a lesser extent than in full sun conditions. Percent native coverage under the PV arrays rose 5- to 8-fold for each of the three sites from over the course of the study, while the coverage of weeds decreased for all three sites over the same period. Percent native coverage varied by seed mix over the project years, but every seed mix experienced a higher percent native coverage year after year under the PV arrays. Our results did not indicate a difference in establishment across placement within the array; the center, west, and east portions of the areas in between panels had similar establishment rates at two out of three sites, indicating that the same seed mix can be applied throughout the array. Out of 101 plant species seeded, we observed the establishment of 68 species in our vegetative test plots, and we detailed the top 20 observed species to inform future seed mix development. Based on these findings, native pollinator vegetation can establish over time at solar arrays, and it can be suitable for creating habitat at utility-scale solar sites.

Functional and perceptive differences between conventional and advanced ankle foot orthoses in community ambulators post-limb trauma: the injuries managed with advanced bracing of the lower extremity (IM ABLE) study.

Many military service members and civilians suffer from lower extremity trauma. Despite recent advancements in lower limb bracing technology, it remains unclear whether these newer advanced braces offer improved comfort and functionality compared to conventional options. The IDEO (Intrepid Dynamic Exoskeletal Orthosis), a type of "advanced" orthosis was developed to assist in maintaining high functional performance in patients who have experienced high-energy lower extremity trauma and underwent limb salvage surgeries. A cross-sector multi-site initiative was completed to study the efficacy of advanced ankle foot orthoses (AFO) for lower limb trauma and injury compared to a conventional AFO. Following fitting, training, and accommodation, the subjects were assessed in each AFO system for mobility, self-reported function, safety and pain, and preference. They preferred the advanced over the conventional AFO and the mobility and exertion perception improved with the advanced AFO with no difference in pain or overall health status scores. Thus, an advanced AFO is an option for trauma affecting the lower limb. Long-term studies are required to better understand the accommodation and learning process of using an advanced AFO.

Outcomes of surgical treatment of tracheobronchomalacia in children.

Tracheobronchomalacia (TBM) is characterized by excessive dynamic airway collapse. Severe TBM can be associated with substantial morbidity. Children with secondary TBM associated with esophageal atresia/tracheoesophageal fistula (EA/TEF) and vascular-related airway compression (VRAC) demonstrate clinical improvement following airway pexy surgery. It is unclear if children with severe primary TBM, without secondary etiologies (EA/TEF, vascular ring, intrinsic pulmonary pathology, or complex cardiac disease) demonstrate clinical improvement following airway pexy surgery. The study cohort consisted of 73 children with severe primary TBM who underwent airway pexy surgery between 2013 and 2020 at Boston Children's Hospital. Pre- and postoperative symptomsas well as bronchoscopic findings were compared with Fisher exact test for categorical data and Student'st-test for continuous data. Statistically significant improvements in clinical symptoms were observed, including cough, noisy breathing, prolonged respiratory infections, pneumonias, exercise intolerance, cyanotic spells, brief resolved unexplained events (BRUE), and noninvasive positive pressure ventilation (NIPPV) dependence. No significant differences were seen regarding oxygen dependence, ventilator dependence, or respiratory distress requiring NIPPV. Comparison of pre- and postoperative dynamic bronchoscopy findings revealed statistically significant improvement in the percent of airway collapse in all anatomic locations except at the level of the upper trachea (usually not malacic). Despite some initial improvements, 21 (29%) patients remained symptomatic and underwent additional airway pexies with improvement in symptoms. Airway pexy surgery resulted in significant improvement in clinical symptoms and bronchoscopic findings for children with severe primary TBM; however, future prospective and long-term studies are needed to confirm this benefit.

Effect of COVID-19 Vaccination on Menstrual Cycle Patterns of Reproductive-age Women: A Multi-centric Observational Study.

The study was conducted to know the impact of COVID-19 vaccination on menstrual cycle patterns and pre- and post-menstrual symptoms in women aged 18-45 years. COVID-19 vaccination was introduced to combat the dreadful impacts of human coronavirus infection. The two indigenously developed COVID-19 vaccines approved for use in India are COVISHIELD and COVAXIN. To investigate the effects of COVID-19 vaccination on the menstrual cycle, pre- and post-menstrual symptoms and to establish the correlation with the type of vaccine received. Multi-centric observational study conducted in six institutes of national importance in different states of India over one year. A total of 5709 female participants fulfilling inclusion criteria were enrolled. Data about the impact of vaccines (COVISHIELD and COVAXIN) and prior COVID-19 infection on the menstrual cycle and its associated symptoms were obtained using all participants' online and offline interviews. Of 5709 participants, 78.2% received COVISHIELD and 21.8% COVAXIN. Of the total 5709 participants, 333 (5.8%) developed post-vaccination menstrual disturbances, with 32.7% having frequent cycles, 63.7% prolonged cycles, and 3.6% inter-menstrual bleeding. A total of 301 participants noticed changes in the amount of bleeding, with 50.2% excessive, 48.8% scanty, and 0.99% amenorrhea followed by heavy bleeding. Furthermore, the irregularities of the menstrual cycle (p = 0.011) and length (0.001) were significantly higher in the COVAXIN group (7.2%) as compared to the COVISHIELD (5.3%) group. A total of 721 participants complained of newly developed/worsening pre- and post-menstrual symptoms. These symptoms were significantly higher in the COVISHIELD group (p = 0.031), with generalized weakness and body pains as the main complaints (p = 0.001). No significant difference was observed in the incidence of COVID-19 infection with these vaccines. No significant associations were observed when comparing menstrual abnormalities among those with COVID-19 infection (p > 0.05). COVISHIELD and COVAXIN vaccines were associated with menstrual cycle disturbances and pre-and post-menstrual symptoms in a small proportion of participants, with 94.7% having no change in the amount of bleeding during menstruation post-vaccination. The menstrual irregularities observed were significantly higher with the COVAXIN vaccine. Others: Further, long-term studies are required to confirm that the impact of COVID-19 vaccination on the menstrual cycle may be short-lasting, with no severe effects on women's menstrual health.

Nest structure and breeding success in two tit species: a long-term study

AbstractOne of the most critical functions of nests in parids is thermal insulation, particularly during egg incubation by females and during the first week of the hatchlings’ life when they are poikilothermic. Several avian studies reported associations between aspects of breeding success and nest parameters. In this study, we present results regarding long-term (eleven breeding seasons) impact of nest parameters on breeding characteristics in Great Tits (Parus major) and Eurasian Blue Tits (Cyanistes caeruleus) in a deciduous forest and an urban parkland study area. Our findings indicate that in Great Tits and Eurasian Blue Tits the number of fledglings (and in Eurasian Blue Tits also clutch size tended to be) was positively associated with lining mass and was influenced by the study area, with higher values observed in the forest. Additionally, there was a relationship between lining mass and higher hatching success in both tit species. We also demonstrated that both clutch size and number of fledglings were higher in Great Tits in the forest and in Eurasian Blue Tits the number of fledglings was higher in the forest. The study site also impacted hatching success, with Great Tits showing higher rates in the forest, and fledging success for Eurasian Blue Tits being higher in the forest. The number of fledglings differed between years in Great Tits and hatching success and fledging success differed between years in both Great and Eurasian Blue Tit species. We conclude that avian nests play an important role during reproduction, and the materials used to construct nests contribute to various functional properties. However, further studies are needed to establish clear relationships between nest parameters and breeding performance.

Adsorption of trace metals onto different plastics during long-term exposure in an estuarine environment: Influence of time, stratified water column, and specific surface area

The pervasive increase of plastics in marine systems and subsequent trace metals (TM) adsorption represents a critical environmental challenge. This long-term study is first to investigate how duration of exposure and stratified water column impact TM adsorption on various plastics in an estuary. We exposed polypropylene (PP), polyethylene (PE), poly(ethylene terephthalate) (PET), and fluorinated ethylene propylene (FEP) to estuarine conditions, categorizing them into three distinct groups to capture diverse human activities: pre-production pellets (Pellets), single-use plastics (SUP) and laboratory plastics (Lab). Plastic and water samples were analyzed before deployment and 1, 4, 7 and 16 months after deployment at three depths in the stratified Krka River estuary (Croatia). We measured TM concentrations, pH and salinity in the water column, and adsorbed TM amounts on plastics. Additionally, we examined plastic sample surfaces by Raman spectroscopy and scanning electron microscopy. TM speciation was modeled from water column data to better explain adsorption processes. Statistical analysis indicates that Zn, Cd, Pb, Ni, and Co adsorption depends on both duration of exposure and stratified water column, while Cu is influenced solely by duration of exposure to estuarine environment. Adsorbed TM amounts varied significantly among the plastic groups (Pellets, SUP and Lab), but not among different polymer types (PP, PE, PET and FEP). A noteworthy observation was the difference in the results of statistical analysis when investigating TM amounts expressed by plastic sample mass and by plastic sample surface area. Results expressed by plastic sample mass showed a difference between SUP group versus Pellets and Lab groups, while results expressed by plastic sample surface area distinguished Pellets group compared to other two groups. Therefore, we suggest presenting TM adsorption results in similar studies both by plastic sample mass and by plastic sample surface area. This approach will improve the understanding of TM adsorption on plastics, and enable more effective comparisons among the scientific literature dealing with plastics of different specific surface areas.

Effect of donor warm ischemia time during graft extraction in right lobe robotic donor hepatectomy on recipient outcomes—A propensity score matched analysis

One of the concerns specific to minimally invasive donor hepatectomy (MIDH) is the prolonged time required for graft extraction after completion of the donor hepatectomy (donor warm ischemia time [DWIT]). There has never been an objective evaluation of minimally invasive donor hepatectomy-DWIT on allograft function in living donor liver transplantation. We evaluated the effect of DWIT following robotic donor hepatectomy (RDH) on recipient outcomes and compared them with a matched cohort of open donor hepatectomy (ODH). Demographic, perioperative, and recipient’s postoperative outcome data for all right lobe (RL)-RDH performed between September 2019 and July 2023 were analyzed and compared with a propensity score matched cohort (1:1) of RL-ODH from the same time period. Of a total of 103 RL-RDH and 446 RL-ODH, unmatched and propensity score matched analysis (1:1) revealed a significantly longer DWIT in the RDH group as compared to the ODH group (9.33 ± 3.95 vs 2.87 ± 2.13, P < .0001). This did not translate into any difference in the rates of early allograft dysfunction (EAD), biliary complications, major morbidity, or overall 1-and 3-month survival. The receiver operating characteristic curve analysis threshold for DWIT-early allograft dysfunction was 9 minutes (area under receiver operating characteristic: 0.67, sensitivity = 80%, specificity = 53.8%). We show that prolonged DWIT within an acceptable range in RDH does not have deleterious effects on short-term recipient outcomes. Further long-term studies are required to confirm our findings, especially with regard to nonanastomotic biliary complications.

Revitalizing CO2 photoreduction: Fine-tuning electronic synergy in ultrathin g-C3N4 with amorphous (CoFeNiMnCu)S2 high-entropy sulfide nanoparticles for enhanced sustainability

Sustainability is a key issue in developing stable and efficient catalysts for solar-catalyzed CO2 conversion. The concept of structural stabilization by quenching the Gibbs free energy, which is achieved by increasing the configurational entropy level of the system, introduced high-entropy materials. However, because alloying immiscible multimetallic atoms into a unit system is still an arduous process, the potential of high-entropy materials has not yet been fully exploited. Surprisingly, although metal sulfide photocatalysts have an enviable reputation for CO2 photoreduction (CO2-PR) owing to their optical/electronic merits and more negative redox potential than other materials, the capability of high-entropy metal sulfides has been completely disregarded. Herein, an adaptable, self-templating metal alkoxide appropriately addresses the immiscibility of metallic constituents by the well-blended metal ions with polyalcohol in the metal glycerate. Consequently, (CoFeNiMnCu)S2 high-entropy metal sulfide nanoparticles (HEMS-Nps) were grown in situ on crossed ultrathin g-C3N4 (UCN) monolayers during the sulfidation of the metal glycerate. The as-synthesized HEMS-Np has a crystalline–amorphous structure, which is conducive to the acceleration of charge transfer to/from reaction sites, and a convincing orientation for CO2 adsorption. These features are combined with synergistic electronic multimetallic interactions, facilitating a heterogeneous valence electron distribution and atomic disorder. The CO2-PR power of the (CoFeNiMnCu)S2@UCN nanostructure was noticeable in realizing added-value products in both the liquid–solid (1063 µmol/g h of syngas and 250 µmol/g h of methane) and gas–solid phases (1883 µmol/cm2 h of syngas and 321 µmol/cm2 h of methane). To prove its utility, long-term and corresponding time-equivalent cycling experiments were conducted, demonstrating a highly stable system that endured for a long time. Overall, this approach simultaneously exploits the advantages of sulfide-based materials and high-entropy materials in stable structures to generate sustainable CO2-PR materials.

Employing Dolomite as Magnesium Source to Prepare Calcined Layered Double Hydroxides for Chromium Contaminated Soil Treatment: Exploring the Influence of Temperature, Bioavailability, and Microbial Diversity

Layered double hydroxides (LDH-D) and their calcined counterparts, using dolomite as a source of magnesium, were utilized for the immobilization of chromium (Cr(VI)) in soil. The results indicate that LDH-D, both with and without varying calcination temperatures, can effectively immobilize Cr(VI) in soil. Among the different calcination temperatures tested, LDH-D subjected to calcination at 500°C (LDH-D-500) showed particularly high efficacy. Long-term TCLP experiments demonstrated the inhibition of soil-to-plant transmission of Cr(VI), thereby highlighting the long-lasting immobilization capacity of LDH-D and its calcined derivatives. Furthermore, the analysis of the microbial community's adaptation in post-remediation soil confirmed the durability and bioavailability of LDH-D-500 for Cr immobilization. Examination of the material's morphology and structure after immobilization shed light on the mechanism of immobilization in soil. The results revealed that interlayer anion exchange and surface adsorption were the main factors responsible for the effective immobilization of LDH-D and LDH-D-300. On the other hand, LDH-D-900, with a dominant spinel (MgAl2O4) structure, faced challenges in returning to its original layered configuration, making surface adsorption the primary mechanism for immobilization. LDH-D-500 primarily relied on the structure memory effects of LDHs to immobilize Cr(VI) through structural recovery processes, facilitated by electrostatic attraction and surface adsorption. It is also important to note that CaCO3 plays an important role in adsorption. Additionally, a portion of Cr(VI) was converted to Cr(III) through phenomena such as isomer substitution and complexation adsorption. The proficiency of LDH-D-500 in immobilizing Cr, its ability for instantaneous separation, and the potential for regeneration make it a promising material for remediation of heavy metal-contaminated soil. The investigations suggest that the use of dolomite to create hydrotalcite and calcining it at 500°C could effectively render environmental Cr inactive, thereby optimizing resource utilization.

Appendage-resident epithelial cells expedite wound healing response in adult zebrafish.

Adult zebrafish are able to heal large-sized cutaneous wounds in hours with little to no scarring. This rapid re-epithelialization is crucial for preventing infection and jumpstarting the subsequent regeneration of damaged tissues. Despite significant progress in understanding this process, it remains unclear how vast numbers of epithelial cells are orchestrated on an organismic scale to ensure the timely closure of millimeter-sized wounds. Here, we report an unexpected role of adult zebrafish appendages (fins) in accelerating the re-epithelialization process. Through whole-body monitoring of single-cell dynamics in live animals, we found that fin-resident epithelial cells (FECs) are highly mobile and migrate to cover wounds in nearby body regions. Upon injury, FECs readily undergo organ-level mobilization, allowing for coverage of body surfaces of up to 4.78mm2 in less than 8 h. Intriguingly, long-term fate-tracking experiments revealed that the migratory FECs are not short-lived at the wound site; instead, the cells can persist on the body surface for more than a year. Our experiments on "fin-less" and "fin-gaining" individuals demonstrated that the fin structures are not only capable of promoting rapid re-epithelialization but are also necessary for the process. We further found that fin-enriched extracellular matrix laminins promote the active migration of FECs by facilitating lamellipodia formation. These findings lead us to conclude that appendage structures in regenerative vertebrates, such as fins, may possess a previously unrecognized function beyond serving as locomotor organs. The appendages may also act as a massive reservoir of healing cells, which speed up wound closure and tissue repair.

Effect of nitrogen addition on soil net nitrogen mineralization in topsoil and subsoil regulated by soil microbial properties and mineral protection: Evidence from a long-term grassland experiment

Soil net nitrogen mineralization (Nmin), a microbial-mediated conversion of organic to inorganic N, is critical for grassland productivity and biogeochemical cycling. Enhanced atmospheric N deposition has been shown to substantially increase both plant and soil N content, leading to a major change in Nmin. However, the mechanisms underlying microbial properties, particularly microbial functional genes, which drive the response of Nmin to elevated N deposition are still being discussed. Besides, it is still uncertain whether the relative importance of plant carbon (C) input, microbial properties, and mineral protection in regulating Nmin under continuous N addition would vary with the soil depth. Here, based on a 13-year multi-level field N addition experiment conducted in a typical grassland on the Loess Plateau, we elucidated how N-induced changes in plant C input, soil physicochemical properties, mineral properties, soil microbial community, and the soil Nmin rate (Rmin)-related functional genes drove the responses of Rmin to N addition in the topsoil and subsoil. The results showed that Rmin increased significantly in both topsoil and subsoil with increasing rates of N addition. Such a response was mainly dominated by the rate of soil nitrification. Structural equation modeling (SEM) revealed that a combination of microbial properties (functional genes and diversity) and mineral properties regulated the response of Rmin to N addition at both soil depths, thus leading to changes in the soil N availability. More importantly, the regulatory impacts of microbial and mineral properties on Rmin were depth-dependent: the influences of microbial properties weakened with soil depth, whereas the effects of mineral protection enhanced with soil depth. Collectively, these results highlight the need to incorporate the effects of differential microbial and mineral properties on Rmin at different soil depths into the Earth system models to better predict soil N cycling under further scenarios of N deposition.

Thermodynamic description of U(IV) solubility and hydrolysis in chloride systems: Pitzer activity model for the system U4+–Na+–Mg2+–Ca2+–H+–Cl––OH––H2O(l)

This study presents updated chemical, thermodynamic, and activity models for the system U4+–Na+–Mg2+–Ca2+–H+–Cl––OH––H2O(l) derived using the Pitzer formalism and a strict ion interaction approach. The models build on comprehensive solubility datasets in dilute to concentrated NaCl, MgCl2, and CaCl2 solutions. The Nuclear Energy Agency-Thermochemical Database (NEA-TDB) selection of solubility and hydrolysis constants in the reference state were taken as anchoring point, and were extended further with the solid nanocrystalline phase UO2∙H2O(ncr) and the ternary complex Ca4[U(OH)8]4+. The former was identified in long-term solubility experiments at ambient conditions, whereas the latter has been selected in analogy to Th(IV), Np(IV), and Pu(IV) considering experimental evidences available for these An(IV) in alkaline, concentrated CaCl2 solutions. These models represent an improved tool for the calculation of U(IV) solubility and aqueous speciation in a variety of geochemical conditions including concentrated brine systems relevant in salt-based repositories for nuclear waste disposal.

Translation Studies Activity of P. Kulish in Epistolary Documents of V. I. Vernadsky National Library of Ukraine and Chernihiv State Literary-memorial Museum of Mykhailo Kotsyubynsky

The aim of the article is to study the long-term translation studies activity of P. Kulish based on the epistolary sources material stored in the funds of the Institute of Manuscripts of V. I. Vernadsky National Library of Ukraine (hereinafter – IM NBUV), and Chernihiv State Literary-Memorial Museum of Mykhailo Kotsyubynsky (hereinafter – CSLMMMK). In a broad culturological context, the significance of his translation studies activity for the prerequisites of forming the Ukrainian literary language is highlighted, but at the same time, he is distinguished by his own translation style and the author’s handwriting. All names of documents and their content, which are contained in library and museum institutions, are presented in the original language, and without any spelling changes. Research methods. This article grounds on general scientific methods of analysis and synthesis, which involved historical, systematic, typological and aesthetic ones, as well as methods of archival and source-based heuristics, source studies criticism, textual analysis of sources and information reconstruction. The combination of these scientific methods makes it possible to analyse in detail the activity of P. Kulish in the field of Ukrainian translation studies. The scientific novelty of the study consists in highlighting the epistolary sources (manuscripts of letters, diary, telegrams) that are stored in the archives of the IM NBUV, and which reveal the translation studies work of P. Kulish. In particular, they point to a significant amount of available documents that testify to the artist’s titanic activity in the process of translating works of European and world literature classics into the Ukrainian language. First of all, the process of translation and publication of V. Shakespeare’s works is described in detail from the corpus of epistolary sources specified in this research. Main conclusions. A large number of P. Kulish’s letters, more than one and a half thousand epistles, is accumulated in the IM NBUV funds. The presented set of archival documents shows one of the many creative interests of P. Kulish, the artist’s translation activity during all his life. This can be proved by the writer’s correspondence and all the documents related to this topic found in NBUV. The epistolary of P. Kulish is scattered among twelve funds of the scientific institution, and is a valuable informational resource that indicates the significance of the translator’s scientific and creative work. CSLMMMK funds also contain a considerable number of archival documents (both letters and translation manuscripts) that directly highlight the translation activity of P. Kulish. A large block of documents related to the writer’s name is concentrated in the fund of his wife, Hanna Barvinok. This is mainly the epistolary heritage of the artist, who corresponded with many correspondents of P. Kulish, particularly, after his death. It is well known to publicity that that P. Kulish translated thirteen dramas of V. Shakespeare, but archival documents show a different statistics. Thanks to Hanna Barvinok’s letters, in which she repeatedly noted that P. Kulish translated fifteen dramas of V. Shakespeare, other figures can be ascertained. However, apart from P. Kulish’s epistles, no other relevant archival material has been found yet, that could testify to the words of the artist’s wife. The information component of Shakespeare’s themes is most widely represented in the correspondence of the translator himself. Especially, this applies both to the translation process itself, and to the printing of works in general.

Nonclinical and clinical characterization of MAU868, a novel human-derived monoclonal neutralizing antibody targeting Brenner-Karlsruhe polyomavirus viral protein 1

Reactivation of Brenner-Karlsruhe polyomavirus (human polyomavirus 1) (BKPyV) can cause significant kidney and bladder disease in immunocompromised patients. There are currently no effective, BKPyV-specific therapies. MAU868 is a novel, human immunoglobulin G1 monoclonal antibody that binds the major capsid protein, viral protein (VP) 1, of BKPyV with picomolar affinity, neutralizes infection by the 4 major BKPyV genotypes (EC50 ranging from 0.009-0.093 μg/mL; EC90 ranging from 0.102-4.160 μg/mL), and has comparable activity against variants with highly prevalent VP1 polymorphisms. No resistance-associated variants were identified in long-term selection studies, indicating a high in vitro barrier-to-resistance. The high-resolution crystal structure of MAU868 in complex with VP1 pentamer identified 3 key contact residues in VP1 (Y169, R170, and K172). To our knowledge, the first-in-human study was conducted to assess the safety, tolerability, and pharmacokinetics of MAU868 following intravenous and subcutaneous administration to healthy adults in a randomized, placebo-controlled, double-blinded, single ascending dose design. MAU868 was safe and well-tolerated. All adverse events were grade 1 and resolved. The pharmacokinetics of MAU868 was typical of a human immunoglobulin G, with dose-proportional systemic exposure and an elimination half-life ranging between 23 and 30 days. These results demonstrate the potential of MAU868 as a first-in-class therapeutic agent for the treatment or prevention of BKPyV disease.

Long-term cohort study of patients presenting with hypercapnic respiratory failure

ObjectiveWe sought to describe the long-term prognosis for a population-based cohort of people with hypercapnic respiratory failure (HRF) and the associations between underlying diagnoses and the risks of death and...

ASSESSMENT OF THE CORROSION-MECHANICAL PROPERTIES OF THE LEFT MATERIALS AND FORECASTING THE SAFETY OF GAS TURBINE PARTS

Purpose. Determination of the possibility of using the temperature-time parametric dependences of Miller-Larson, Manson-Haferd, and Sherby-Dorn for long-term prediction of the strength characteristics of parts subjected to oxidation and high-temperature sulfide-oxidation effects. Research methods. Long-term strength studies were performed on samples of ВЖЛ-12У and ЗМІ-3У alloys in synthetic ash (66.2 % Na2SO4, 20.4 % Fe2O3, 8.3 % NiO, 3.3 % CaO, 1.8 % V2O5) and an oxidizing environment at temperatures of 800 °C and 850 °C. The Miller-Larson, Manson-Haferd, and Sherby-Dorn temperature-time parametric dependences were used to predict the tensile strength of materials in an oxidizing and corrosive environment. The microstructure of the samples was studied using an optical microscope MIM-8M. Results. The results obtained indicate a high level of corrosion resistance of ЗМІ-3У samples at 800 °C and 850 °C and the possibility of determining the tensile strength of the material for a period of 1000, 5000, and 10000 hours by the calculation method. Tests of ВЖЛ-12У alloy samples in synthetic ash showed a discrepancy between the experimental time to fracture and the calculated value, regardless of the parametric method, which indicates a direct dependence of long-term strength on the degree of corrosion damage to the surface of the samples. Scientific novelty. The possibility of using the Miller-Larson, Manson-Haferd, and Sherby-Dorn temperature-time parametric dependences for long-term prediction of the strength characteristics of parts in an oxidizing environment has been confirmed. In a sulfide-oxide environment, the use of parametric methods to determine strength characteristics for up to 10,000 hours is possible only for corrosion-resistant alloys. Intensive corrosion damage to ВЖЛ-12У alloy leads to accelerated deformation, which limits the use of temperature and time dependencies for effective prediction of the time of failure of parts made of this material. Practical value. Determining a reliable method for predicting the strength characteristics of heat-resistant alloys in an oxidizing and corrosive environment allows reducing the time and financial costs of conducting lengthy field studies.

Patient-reported scar quality in paediatric and adult burn patients: A long-term multicentre follow-up study

BackgroundBurn scar maturation can take several years but is generally studied shortly after injury. Therefore, we investigated patient-reported scar quality up to 5–7 years post-burn. MethodsPatients with ≤ 20 % total body surface area burned completed the Patient Scale of the Patient and Observer Scar Assessment Scale (POSAS 2.0) on the same scar at three, > 18 months (median 28 months) and 5–7 years (median 63 months) post-burn. ResultsFifty-eight patients (21 children; 37 adults) with a median total body surface area burned of 6.3 % participated. Average patient-reported scar quality (POSAS score) was generally worst at three months (median score: 4.2), best at 28 months (median score: 2.2) and in between at 63 months post-burn (median score: 3.4) (p < 0.001). Many patients (66 %) reported a median 1.8 point higher (worse) POSAS score at 63 months compared to 28 months post-burn, whereas 14 % reported an identical, and 21 % a lower (better) score. At any assessment, largest differences with normal skin were reported for scar colour. Univariate predictive factors of long-term patient-reported scar quality were scar quality at three months (p = 0.002) and 28 months post-burn (p < 0.001), percentage total body surface area full-thickness (p = 0.033), length of hospital stay (p = 0.003), and number of surgeries (p < 0.001). ConclusionTwo-third of patients with burns up to 20 % total body surface area burned scored the quality of their scars worse at 63 months compared to 28 months post-burn. Whether this corresponds to increased dissatisfaction with scars in the long-term should be further investigated. These new insights add to the body of knowledge on scar maturation and underscores the importance of discussing patients’ expectations.

No Revisions Attributable to Wear of Highly Cross-Linked Polyethylene Liners: A Long-Term Follow-Up Study

BackgroundThere is a paucity of data beyond 15 years on the survivorship of total hip arthroplasty since the introduction of highly cross-linked polyethylene (HXLPE) liners. Our aim was to evaluate implant survivorship, liner wear rates, and clinical outcomes after primary total hip arthroplasty using HXLPE liners implanted between 1999 and 2002. MethodsBetween 1999 and 2002, 690 primary total hip arthroplasties utilizing 28-mm femoral heads and HXLPE liners of a single design were identified using our institutional total joint registry. Femoral heads were made of metal in 96% of cases and ceramic in 4%. The mean age was 56 years, 48% were women, and the mean body mass index was 30. Survivorship analyses were performed for the outcomes of implant revision, reoperation, and complications for the entire cohort. Linear HXLPE liner wear rates were determined on 197 hips with radiographs with more than 18.5 years of follow-up. ResultsAt 20 years, survivorship free of revision was 94%, free of reoperation was 92%, and free of any complication was 81%. There were no documented wear-related revisions. The linear wear rate at a mean of 20.3 years postoperatively was 0.02 mm/y. There was no statistically significant difference in measured wear observed between the first available postoperative radiographs and those taken at the final follow-up. The use of elevated liners, patient body mass index, age, preoperative diagnosis, acetabular component inclination, and anteversion angles were not associated with increased wear rates. Mean Harris hip scores improved from 52 preoperatively to 90 at greater than 18.5 years ConclusionsPrimary total hip arthroplasties using a single first-generation HXLPE liner demonstrated excellent survivorship and clinical outcomes at long-term follow-up with no wear-related revisions. Wear rates of HXLPE liners at 20 years are exceedingly low and are not significantly impacted by acetabular component position or patient-dependent variables such as BMI. Level of EvidenceIV