Long-term Antibacterial Effect Research Articles

Triclosan to Improve the Antimicrobial Performance of Universal Adhesives.

To solve the proble ms of composite restoration failure caused by secondary caries, this study reports a light curable antibacterial triclosan derivative (TCS-IH), which was synthesized and added to the existing commercial universal adhesive to achieve a long-term antibacterial effect The effect of mixing different mass percentages of TCS-IH on the bond strength of dentin was also investigated.TCS-IH was synthesized by solution polymerization and characterized by nuclear magnetic resonance hydrogen spectroscopy (1H NMR) and Fourier transform infrared (FTIR) spectroscopy. Two commercial universal adhesives, Single Bond Universal and All Bond Universal, were selected and used as the control group, and universal adhesives with different mass percentages (1 wt%, 3 wt%, 5 wt% and 7 wt%) of TCS-IH were used as the experimental group. The antibacterial properties were analysed by means of colony count experiments, biofilm formation detection, plotting of growth curves, biofilm metabolic activity detection, insoluble extracellular polysaccharide measurements and observations by confocal laser scanning microscopy and scanning electron microscopy (SEM). The effect of adhesives on biofilm formation, metabolism, extracellular matrix production, distribution of live and dead bacteria, and bacterial morphology of Streptococcus mutans (S. mutans) was analysed. The mechanical properties were evaluated by the degree of conversion and microtensile bonding strength under different conditions. Its biosafety was tested. We found that the addition of TCS-IH significantly improved the antibacterial performance of the universal adhesive, with the 5 wt% and 7 wt% groups showing the best antibacterial effect and effectively inhibiting the formation of biofilm. In addition, the adhesive strength test results showed that there was no statistical difference (p < 0.05) in the microtensile bond strength measured under various factors in all experimental groups except for the 7 wt% group in the self-etch bonding mode, and all of them had good biosafety. In summary, the 5 wt% group of antibacterial monomer TCS-IH was selected as the optimum addition to the universal adhesive to ensure the antimicrobial properties of the universal adhesive and the stability and durability of the adhesive interface. This study provides a reference for the clinical application of adhesives with antimicrobial activity to improve the stability and durability of adhesive restorations.

Droplet-based energy harvesting superhydrophobic membrane with bacterial sensing ability for continuous monitoring

Among the polymeric membranes used in various fields, antibacterial membranes are notable due to their direct relation to health and function issues. Therefore, the physical/chemical stability and long-term antibacterial effects of such membranes are significant for their applications. However, the antibacterial membranes could be inevitably contaminated due to continuous usage and membrane damage, which would be significantly detrimental to human health. Herein, a polysilsesquioxane (PSQ)-based superhydrophobic smart membrane with antibacterial and bacterial sensing ability is introduced that can applied to various types of membrane. The PSQ membrane has superior antibacterial effect via contact-killing/repulsion due to quaternary ammonium and long alkyl chains on surfaces, and has the additional function of water-droplet based energy harvesting. The harvested energy is utilized as for sensing, and the membrane sensor is able to continuously monitor the damage level of the membrane and the degree of bacterial contamination. Hence, this droplet-based energy harvesting superhydrophobic membrane (DESm) is expected to prevent any infection that could otherwise arise due to membrane contamination during daily use.

Antibacterial and Antiviral Coating on Surfaces through Dopamine-Assisted Codeposition of an Antifouling Polymer and In Situ Formed Nanosilver.

Bacteria and viruses can adhere onto diverse surfaces and be transmitted in multiple ways. A bifunctional coating that integrates both antibacterial and antiviral activities is a promising approach to mitigate bacterial and viral infections arising from a contaminated surface. However, current coating approaches encounter a slow reaction, limited activity against diverse bacteria or viruses, short-term activity, difficulty in scaling-up, and poor adaptation to diverse material surfaces. Here, we report a new one-step strategy for the development of a polydopamine-based nonfouling antibacterial and antiviral coating by the codeposition of various components. The in situ formed nanosilver in the presence of polydopamine was incorporated into the coating and served as both antibacterial and antiviral agents. In addition, the coassembly of polydopamine and a nonfouling hydrophilic polymer was constructed to prevent the adhesion of bacteria and viruses on the coating. The coating was prepared on model surfaces and thoroughly characterized using various surface analytical techniques. The coating exhibited strong antifouling properties with a reduction of nonspecific protein adsorption up to 90%. The coating was tested against both Gram-positive and Gram-negative bacteria and showed long-term antibacterial effectiveness, which correlated with the composition of the coating. The antiviral activity of the coating was evaluated against human coronavirus 229E. A possible mechanism of action of the coating was proposed. We anticipate that the optimized coating will have applications in the development of infection prevention devices and surfaces.

A promising hydroxyapatite whisker with long-term and high-efficiency antibacterial performance and its potential application in implant

• The synergistic effect of nano-zinc oxide and silver ions can realize broad-spectrum antibacterial. • The silver ions in the hydroxyapatite whiskers will gradually dissolve as the whiskers degrade, realizing long-term antibacterial effects. Osteomyelitis remains one of the most challenging diseases for orthopedic doctors despite the advancement of therapeutic techniques. Biomaterials with antibacterial activities are beneficial to prevent infection post implantation. The aim of this study was to evaluate the antibacterial effects of three biomaterials including pure- hydroxyapatite (HA), Ag-HA and Ag-HA/ZnO. The prepared materials were analyzed by X-ray diffractometer (XRD), scanning electron microscope (SEM), cell adhesion and long-service antibacterial ability. The results showed that with the increase of silver content, the growth of whiskers was inhibited and the aspect ratio became smaller. Nano-zinc oxide is evenly attached on the surface of the whiskers. Escherichia coli ( E. coli) and Staphylococcus aureus ( S. aureus) were used for antibacterial tests. The results showed that Ag-HA and Ag-HA/ZnO had good antibacterial ability against E. coli and S. aureus . Thus, the low amount of Ag-HA has a potential of minimizing the risk of bacterial contamination, without compromising the bioactivity, and is expected to display greater biological efficacy in terms of osseointegration. Ag + and ZnO particles have a synergistic effect and can effectively kill most bacteria. At the same time, with the degradation of hydroxyapatite, Ag + is slowly released, which can play a long-term antibacterial effect.

Strontium doped electrospinning fiber membrane with antibacterial and osteogenic properties prepared by pulse electrochemical method

• Composite fibers were prepared by electrostatic spinning and pulse electrochemical deposition. • PPy controls the slow release of Sr 2+ and Cu 2+ for a long time. • Good physiological stability and long-term antibacterial effect. • Fiber has good osteogenic and angiogenic properties. The osteogenic differentiation and new bone formation are commonly delayed by bacterial infection of orthopedic implants, which is urgent to be resolved quickly in the clinic. The current paper prepared a strontium-doped electrospinning fiber membrane with antibacterial and osteogenic properties by pulse electrochemical method. Polylactic acid/hydroxyapatite (PLLA/HA) composite fiber substrate was fabricated by electrospinning technology, and strontium doped SrHA/Cu/Polypyrrole (PPy) composite coating was constructed with pulse electrodeposition method on its surface. The strontium doping technique, degradation of Sr 2+ and Cu 2+ , cellular compatibility, and the antibacterial activity of the fiber membrane were examined. The results revealed that the deposition of phosphorus and calcium on composite fiber was the highest, indicating good biological activity. The release of Sr 2+ and Cu 2+ was stable and gradual due to the modulation of PPy. The composite fiber presented excellent antibacterial performance and the antibacterial rate was close to 100% against Staphylococcus aureus and Escherichia coli. Furthermore, it is conducive to the adhesion, spread, and proliferation of vascular endothelial cells and osteoblasts, namely outstanding osteogenesis and angiogenesis abilities. In conclusion, the multifunctional PLLA/HA@SrHA/Cu/PPy composite fiber membrane with good antibacterial and osteogenic activity by electrospinning technology and pulsed electrochemical deposition method provides an effective strategy for the poor bone healing of infected bone defects. Strontium doped antibacterial osteogenic PLLA/HA@SrHA/Cu/PPy composite fiber was constructed by electrostatic spinning and pulsed electrochemical deposition technology, which showed good antibacterial properties and had the ability to promote bone induction and angiogenesis.

Synthesis and Application of AgNPs-Chitosan Composite as a Self-Disinfecting Coating in Water-Based Polyurethane

Infectious diseases still represent an important cause of mortality for humans. One of the main reasons is that various pathogenic bacteria can persist and survive on inanimate surfaces for many days. Therefore, self-disinfection coating technology has become of interest to deal with this problem. In this research, we propose to develop a self-disinfection coating containing AgNPs-chitosan composite in 50% water-based polyurethane (WPU), which has a strong short- and long-term antibacterial effect. The coating agent was synthesized by conventional composite approaches. The physical and chemical properties of AgNPs-chitosan nanocomposite are studied by TEM, SEM, and FTA 100 Drop Shape Instrument B Frame System. The results show that at a concentration of 39 μg/mL, when reducing the size of AgNPs from 7.29 ± 1.65 to 4.66 ± 2.08 nm, the shape of a sphere turns into an asymmetrical circle and leads to increasing aggregation of AgNPs. Negative charges on the surface of AgNPs interact with amine (-NH2) and hydroxyl (-OH) groups of chitosan through an electrostatic force. All formulations of the coating showed low hydrophobicity properties. Moreover, the short- and long-term antibacterial activity of the coating were investigated by application of the ISO 22196 standard protocol. The mean inhibition percentage of E. coli O157:H7 and S. aureus ATCC25722 of the formulation containing AgNPs at a concentration of 1280 µg/mL and 50% v/v of WPU (Formula 4) and the formulation containing AgNPs at a concentration of 1280 µg/mL, chitosan 39 µg/mL and 50% v/v of WPU (Formula 8) from 1 day to 4 months after the coating completely dried was 81.72% ± 3.15% and 82.07% ± 3.01% on E. coli O157:H7, 84.64% ± 2.59% and 83.27% ± 3.12% on S. aureus ATCC25722, respectively. There was no significant difference from statistical analysis at 95% confidence interval (p < 0.05). Furthermore, the quantify of silver ion from coating was measured by ICP-MS. The result reveal that the formulation containing AgNPs at a concentration of 1280 µg/mL, chitosan 39 µg/mL and 50% v/v of WPU (Formula 8) released an amount of silver ion lower than the formulation containing AgNPs at a concentration of 1280 µg/mL and 50% v/v of WPU (Formula 4) by approximately 5.92 times, while the same concentration of AgNPs and inhibition efficacy was not significantly different. In addition, such a concentration was non-toxic on NHDF cells, which were investigated by MTT assay. Therefore, formulation containing AgNPs at a concentration of 1280 µg/mL, chitosan 39 µg/mL and 50% v/v of WPU coating (Formula 8) will be further developed into commercial self-disinfection coatings.

Hybridization of carboxymethyl chitosan with bimetallic MOFs to construct renewable metal ion “warehouses” with rapid sterilization and long-term antibacterial effects

Pathogens transmitted through the water environment pose a great threat to human health. Hence developing more reliable and efficient antibacterial materials to eliminate bacterium in water environments is urgent. Herein, we posed a novel strategy of interweaving carboxymethyl chitosan (CMCS) and Ag/Cu-MOFs to construct renewable Ag/Cu-BTC@CMCS composite beads with rapid sterilization, long-term antibacterial effects and high biosafety. Characterizations revealed that CMCS and bimetallic MOFs act as the “warehouses” of metal ions and played key roles in anchoring, storage, delivery, and controlled release of metal ions. The synergistic antibacterial effect achieved by the combination of Ag+ and Cu2+ provides the composite beads with high antibacterial efficiency, resulting in low minimum inhibitory concentrations (0.32 mg/mL against E. coli and 0.16 mg/mL against S. aureus) and over 99.9 % bacteria killing rate. Benefiting from the rapid release of metal ions from polymer chains and the long-term release from MOFs, the composite beads can effectively sterilize the simulated swimming pool water in 2 h and persistently inhibit bacterial reproduction over 48 h, and show a safe level of residual heavy metals because of the chelation of CMCS. This work provides new insights and promises a strategy for the design and commercial application of novel water fungicides.

A Polytetrafluoroethylene (PTFE) and Nano-Al2O3 Based Composite Coating with a Bacteriostatic Effect against E. coli and Low Cytotoxicity.

The problem of bacterial contamination through surfaces is important for the food industry. In this regard, there is a growing interest in new coatings based on nanoparticles that can provide a long-term antibacterial effect. Aluminum oxide nanoparticles are a good candidate for such coatings due to their availability and good biocompatibility. In this study, a coating containing aluminum oxide nanoparticles was produced using polytetrafluoroethylene as a polymer matrix-a polymer that exhibits excellent mechanical and physicochemical properties and it is not toxic. The obtained coatings based on "liquid Teflon" containing various concentrations of nanoparticles (0.001-0.1 wt%) prevented the bacterial growth, and they did not exhibit a cytotoxicity on animal cells in vitro. Such coatings are designed not only to provide an antibacterial surface effect, but also to eliminate micro damages on surfaces that inevitably occur in the process of food production.

Using a degradable three-layer sandwich-type coating to prevent titanium implant infection with the combined efficient bactericidal ability and fast immune remodeling property

Titanium (Ti) implant-associated infections are a challenge in orthopedic surgery, for which a series of antibacterial coatings have been designed and fabricated to reduce the risk of bacterial contamination. Herein, we created a degradable three-layer sandwich-type coating to achieve long-term antibacterial effects while simultaneously reconstructing the local immune microenvironment. The vancomycin (Van)-loaded vaterite coating constitutes the outer and inner layers, whereas Interleukin-12 (IL-12)-containing liposomes embedded in sodium alginate constitutes the middle layer. Van, released from the vaterite, demonstrated a favorable and rapid bactericidal ability against the representative methicillin-sensitive S. aureus (MSSA) and methicillin-resistant S. aureus (MRSA) strains. The released IL-12 exhibited the desired immune reconstitution abilities, actively facilitating defenses against subsequent bacterial invasions. Furthermore, the biocompatibility and cell-binding feature of the multifunctional coating was beneficial for achieving solid interface intergradation. Overall, the benefits of the three-layer sandwich-type coating, including the convenient fabrication process, efficient antimicrobial activity, fast immune remodeling property, fine cell-binding feature, and biodegradability, highlight its promising translational potential in preventing implant infection. Statement of significanceTo prevent titanium implant infections, researchers have designed various antibacterial coatings. However, most of these coatings focused only on killing the invading bacteria over a limited postoperative period. However, the local immune microenvironment is compromised during surgery. Local immune deflection impedes the ability of the local immune defenses to clear bacteria and limits immune memory building from active defense against long-term subsequent bacterial invasions. Furthermore, these coatings are usually nondegradable and differ substantially from bone components, thereby impairing the integration of the coating and bone interface and generating concerns about implant stability and bacterial contamination. In this work, we synthesized a degradable coating that provides sustained antibacterial activity, promotes immune reconstitution, and simultaneously achieves solid bone integration.

Effect of the Modified Methacrylate-Based Root Canal Sealer in Single-Cone Technique.

This study aimed to modify EndoREZ with 2.5% dimethylaminododecyl methacrylate (DMADDM) and 1% magnetic nanoparticles (MNP) to study its sealing property, penetration and long-term antibacterial and therapeutic effect in the single-cone technique (SCT) compared with EndoREZ and iRoot SP. Thirty single-root human maxillary premolars were assigned into three groups and obturated with three different root canal sealers by SCT. Every specimen was then scanned using micro-CT to analyze void fraction, and void volumes and confocal laser scanning microscope (CLSM) was used to study the dentin penetration. The long-term antimicrobial effects were tested in vitro before and after aging 1 and 4 weeks by the single-strain Enterococcus faecalis biofilm model. In addition, the beagle canine model of apical periodontitis (AP) was utilized to judge and compare the therapeutic effect of three sealers in SCT. The void fraction and void volumes of the modified root canal sealer were not significantly different from iRoot SP (p > 0.05) but were lower than EndoREZ (p < 0.05). The modified root canal sealant displayed a greater penetration, long-term antibacterial property, and treatment effect than the other groups (p < 0.05). This indicated that after being modified with DMADDM and MNP, it showed better performance in SCT.

Formation of cinnamon essential oil/xanthan gum/chitosan composite microcapsules basing on Pickering emulsions.

Cinnamon essential oil (CNO) is a natural and renewable antibacterial agent. However, CNO is highly volatile and unstable, which limits its practical application as a long-term and wide antibacterial agent. In order to improve the CNO stability, we have microencapsulated CNO into composite microcapsules basing on Pickering emulsion stabilized by silica (SiO2) nanoparticles. The CNO-loaded composite microcapsules possess the hybrid microcapsule shell including SiO2, xanthan gum and chitosan. Moreover, the results show that the microcapsules have spherical appearance. Microencapsulation technique effectively promotes the CNO stability, and the loaded CNO is slowly released from microcapsules. The antibacterial test indicates that the minimal inhibitory concentration of microcapsules was 2 mg mL−1 against Escherichia coli and Staphylococcus aureus, and the microcapsules can play an effective long-term antibacterial effect. Thus, Pickering emulsion templates is a convenient and effective technique to construct antibacterial essential oil-contained microcapsules, which can be used as long-term antibacterial agents.

3D printed scaffold for repairing bone defects in apical periodontitis

ObjectivesTo investigate the feasibility of the 3D printed scaffold for periapical bone defects.MethodsIn this study, antimicrobial peptide KSL-W-loaded PLGA sustainable-release microspheres (KSL-W@PLGA) were firstly prepared followed by assessing the drug release behavior and bacteriostatic ability against Enterococcus faecalis and Porphyromonas gingivalis. After that, we demonstrated that KSL-W@PLGA/collagen (COL)/silk fibroin (SF)/nano-hydroxyapatite (nHA) (COL/SF/nHA) scaffold via 3D-printing technique exhibited significantly good biocompatibility and osteoconductive property. The scaffold was characterized as to pore size, porosity, water absorption expansion rate and mechanical properties. Moreover, MC3T3-E1 cells were seeded into sterile scaffold materials and investigated by CCK-8, SEM and HE staining. In the animal experiment section, we constructed bone defect models of the mandible and evaluated its effect on bone formation. The Japanese white rabbits were killed at 1 and 2 months after surgery, the cone beam computerized tomography (CBCT) and micro-CT scanning, as well as HE and Masson staining analysis were performed on the samples of the operation area, respectively. Data analysis was done using ANOVA and LSD tests. (α = 0.05).ResultsWe observed that the KSL-W@PLGA sustainable-release microspheres prepared in the experiment were uniform in morphology and could gradually release the antimicrobial peptide (KSL-W), which had a long-term antibacterial effect for at least up to 10 days. HE staining and SEM showed that the scaffold had good biocompatibility, which was conducive to the adhesion and proliferation of MC3T3-E1 cells. The porosity and water absorption of the scaffold were (81.96 ± 1.83)% and (458.29 ± 29.79)%, respectively. Histological and radiographic studies showed that the bone healing efficacy of the scaffold was satisfactory.ConclusionsThe KSL-W@PLGA/COL/SF/nHA scaffold possessed good biocompatibility and bone repairing ability, and had potential applications in repairing infected bone defects.Clinical significance The 3D printed scaffold not only has an antibacterial effect, but can also promote bone tissue formation, which provides an alternative therapy option in apical periodontitis.

A rapid-triggered approach towards antibacterial hydrogel wound dressing with synergic photothermal and sterilization profiles.

Developing non-antibiotic-dependent antibacterial hydrogels for repairing infected skin defect remains largely unexplored. Herein, a synergic photothermal and synergic antibacterial hydrogel was designed via one-pot approach to cope with full-thickness skin wound infection. In this work, the mixture of silver‑sodium lignin sulfonate nanoparticles (Ag-SLS NPs) and polypyrrole-polydopamine nanoparticles (PPy-PDA NPs) for the first time as synergic photothermal agent was introduced into poly (ethylene glycol) diacrylate (PEGDA) to form Ag-SLS/PPy-PDA@PEGDA hydrogel. Thanks to the near-infrared light into heat conversion capacity of both Ag and PPy-PDA NPs, the formed hydrogel shows ultrahigh photothermal activity, and outstanding antibacterial activity to both Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria in vitro. Additionally, in vivo assay indicates that the hydrogel has outstanding long-term antibacterial effect due to the photothermal sterilization along with Ag ions release. Overall, the dual-synergic photothermal and antibacterial effects of the Ag-SLS/PPy-PDA@PEGDA hydrogel could highly accelerate infection wound healing, and thus has great potential to be used for tissue engineering.

Clay-based nanocomposite hydrogels with microstructures and sustained ozone release for antibacterial activity

Loading hydrogels with ozone for antibacterial activity is an important research topic for expanding clinical applications. In particular, hydrogel network constructs and storage and controlled release of massive ozone amounts are research emphases. In this paper, a nanoclay crosslinked nanocomposite hydrogel with a bionic three-dimensional porous network structure formed by two-dimensional lamellar montmorillonite was incorporated into polyacrylamide through a crosslinking reaction, which provided enhanced mechanical properties and abundant ozone adsorption sites. The clay-based nanocomposite hydrogel had the enlarged pore structure (11.7 µm) and a stable Young's modulus (75.82 GPa), which also provided a guarantee for the highly ozone adsorption capacity. The nanocomposite exhibited timely bactericidal and long-term antibacterial effects on Staphylococcus aureus, which provides ideas for the development and application of inexpensive clay minerals in the biomedical antibacterial field.

Wearable and antibacterial HPMC-anchored conductive polymer composite strain sensor with high gauge factors under small strains

Recently, with the increasing demand for health services, wearable devices have attracted a wide range of researchers' interests. Flexible polymer composites are widely concerned for their unique mechanical property and machinability. However, both the conductivity and mechanical properties of conductive polymer composites (CPCs) prepared by direct doping are affected by the conductive nanofillers. Additionally, the selective modifications of conductive fillers on polymer substrate surface have been criticized for their instability. To tackle this, we propose a multifunctional conductive polymer composite (M−CPC) with great flexibility, high conductivity, and antibacterial property, consisting of thermoplastic polyurethane (TPU) and synthetic silver nanoflowers (AgNF), which are embedded by hydroxypropyl methyl cellulose (HPMC). Actually, HPMC can achieve the excellent dispersibility of AgNF and establish a strong contacting between TPU substrate and HPMC/AgNF conductive film through hydrogen bonds. The M−CPC (TPU/HPMC/AgNF) exhibits high conductivity and cyclical stability. Further, the HPMC dispersed AgNF conductive network endows M−CPC with superior strain sensing performance, possessing an extremely high gauge factor (GF) of 2.8 × 107 (working strain: 30–35%), which is the highest GF of CPCs under small strains and has never been reported before. Additionally, HPMC/AgNF also makes M−CPC antibacterial, which has a relatively long-term antibacterial effect for 3 days.

Preparation, physicochemical, and antibacterial properties of bovine serum albumin microspheres loaded with sodium nitrite

In this study, NaNO2-embedded bovine serum albumin microspheres (BSAMs) were prepared by oil-in-water emulsification method, which was covalently cross-linked with transglutaminase (TGase). Moreover, the physicochemical properties and antibacterial effect of BSAMs on Escherichia coli, Staphylococcus aureus, Pseudomonas, and beef and pork jerky were also analyzed. The particle size of BSAMs was about 0.5–2.5 μm observed by scanning electron microscopy. Almost all NaNO2 was encapsulated inside BSAMs, and there was no NaNO2 attaching on the surface of BSAMs. The encapsulation rate of NaNO2 first increased from 0 to 20 U/g TGase and then decreased from 20 to 40 U/g TGase; likewise, the release of NO first increased with the increase of TGase (0–20 U/g) and it decreased when the TGase concentration was 30 and 40 U/g. Based the results of minimal inhibitory concentration and minimal bactericidal concentration, E. coli and Pseudomonas were more sensitive to BSAMs than S. aureus. In addition, the slow release of NO from BSAMs could significantly inhibit the growth of bacteria on the surface of beef and pork jerky in a weak acidic environment compared with NaNO2 used directly, so as to achieve long-term antibacterial effect and prolong the shelf life of meat products.

Long-Term Antibacterial Film Nanocomposite Incorporated with Patchouli Essential Oil Prepared by Supercritical CO2 Cyclic Impregnation for Wound Dressing.

Biocompatible skin wound dressing materials with long-term therapeutic windows and anti-infection properties have attracted great attention all over the world. The cooperation between essential oil and non-toxic or bio-based polymers was a promising strategy. However, the inherent volatility and chemical instability of most ingredients in essential oils make the sustained pharmacological activity of essential oil-based biomaterials a challenge. In this study, a kind of film nanocomposite loaded with patchouli essential oil (PEO-FNC) was fabricated. PEO-loaded mesoporous silica nanoparticles (PEO-MSNs) with drug load higher than 40 wt% were firstly prepared using supercritical CO2 cyclic impregnation (SCCI), and then combined with the film matrix consisting of polyvinyl alcohol and chitosan. The morphology of PEO-MSNs and PEO-FNC was observed by transmission and scanning electron microscope. The mechanical properties, including hygroscopicity, tensile strength and elongation at break (%), were tested. The release behavior of PEO from the film nanocomposite showed that PEO could keep releasing for more than five days. PEO-FNC exhibited good long-term (>48 h) antibacterial effect on Staphylococcus aureus and non-toxicity on mouse fibroblast (L929 cells), making it a promising wound dressing material.

Nanoemulsion of cinnamon essential oil Co-emulsified with hydroxypropyl-β-cyclodextrin and Tween-80: Antibacterial activity, stability and slow release performance

Essential oils (EOs) are gaining great interest as alternatives to synthetic food preservatives due to their antimicrobial activity. However, EOs are hydrophobic and easy to evaporate. In this research, EOs were encapsulated in nanoemulsions with the aid of hydroxypropyl-β-cyclodextrin (HPCD) to protect the ingredients and sustain the release, so as to exert long-term antibacterial effects. The influence of HPCD and its concentration on cinnamon essential oil (CEO) nanoemulsion formation, antibacterial activity, release property and stability was investigated. The results showed that HPCD reduced the particle size of nanoemulsion as the concentration of Tween 80 ranged from 2 to 4 g/L. However, HPCD addition showed adverse effect as the content of Tween 80 was 5 g/L. Antibacterial tests against Escherichia coli and Staphylococcus aureus demonstrated that the addition of HPCD contributed to the increase of antimicrobial activity of CEO nanoemulsions and showed the best effect when the concentration of HPCD was 30 g/L. The release experiment proved the slow-release ability of HPCD, and showed that the cavity of HPCD helped to reduce the loss of CEO, thus delayed the release time and enhanced the antibacterial effect. Meanwhile, the use of HPCD contributed to the storage stability of the emulsion at 4, 25, and 40 °C, and the nanoemulsion remained stable during a storage period of 60 days.

A novel anticaries agent, honokiol-loaded poly(amido amine) dendrimer, for simultaneous long-term antibacterial treatment and remineralization of demineralized enamel

ObjectiveExisting agents to induce enamel self-repair and inhibit the progression of dental caries in the early stage have been proven to be inadequate and far from satisfactory. In this study, a honokiol-loaded poly(amido amine) (PAMAM) dendrimer (PAMH) was constructed to combat early caries lesions in enamel. MethodsPAMH was prepared via a codissolution method. Computational simulation analysis was used to explore the mechanism of honokiol release. The cytotoxicity of PAMH was tested. The antibacterial effects of PAMH were tested by planktonic growth assays and biofilm formation inhibition assays. The remineralization effect of PAMH was examined via transverse microradiography and scanning electron microscopy after a pH cycling model. The in vivo anti-caries effect of PAMH was carried out in a rat model. ResultsHonokiol released from PAMH was slower but more durable in a cariogenic pH environment than in a neutral pH environment, which could be explained through the computational simulation analysis results. Under electrostatic action, P3 beads with the same charge repelled each other and extended outwards, resulting in the rapid expansion of the PAMAM dendrimer and accelerating the release of the drug. At a low pH of 5.5, the protonated P3 beads were not charged and the protonated P1 beads were positively charged. However, the electrostatic repulsive interaction between protonated P1 beads was restricted by the P3 beads in the outermost layer of the PAMAM dendrimer, so the swelling rate was relatively slow, resulting in the slow release of drug molecules in the acidic environment. The cytotoxicity demonstration and the biocompatibility experiment in animal study showed that PAMH is biologically safe. PAMH showed excellent enamel remineralizing ability after pH cycling and showed a long-term antibacterial effect in vitro. Meanwhile, PAMH showed long-term anticaries efficacy in vivo. SignificanceOur findings indicated that PAMH had great potential to combat early caries lesions in enamel for future clinical application.

Effectiveness of photon-initiated photoacoustic streaming in root canal models with different diameters or tapers

BackgroundThis study aimed to compare the use of photon-initiated photoacoustic streaming (PIPS) and conventional needle irrigation (CNI) in conjunction with different concentrations of sodium hypochlorite (NaOCl) to remove Enterococcus faecalis (E. faecalis) suspended bacteria and biofilms from root canal systems with different diameters or tapers.MethodsArtificial root canal samples (n = 480) were randomly divided into three groups (n = 160/group). The canals were prepared to fit file sizes #10/.02, #25/.02, or #25/.06. The size #10/.02 group was incubated for seven days. The size #25/.02 or #25/.06 group was incubated for 2 days. A stable biological model of E. faecalis infection was established. The root canals were washed with distilled water or with 1%, 2%, or 5.25% NaOCl combined with CNI or PIPS. Bacterial suspensions and biofilms were assessed using an ATP assay kit and fluorescence microscopy. Image-Pro Plus was used to analyse the average fluorescence intensity to determine the most suitable root canal irrigation solution.ResultsIn the CNI and PIPS groups, the ATP value of the 5.25% NaOCl subgroup was the lowest, followed by that of the 2% and 1% NaOCl subgroups. The ATP value of the distilled water subgroup was the highest (P < 0.05). When the root canal taper was 0.02, the ATP value of the #10/.02 + PIPS group was significantly lower than that of the #25/.02 + CNI group (P < 0.05). The average fluorescence intensity of the #10/.02 + PIPS group was lower than that of the #25/.02 + CNI group (P < 0.05). When the apical diameter was #25, the ATP value of the 0.02 taper in the PIPS group was lower than that of the 0.06 taper in the CNI group (P < 0.05), and the average fluorescence intensity of the 0.02 taper + PIPS group was lower than that of the 0.06 taper + CNI group (P < 0.05). PIPS combined with 2% and 5.25% NaOCl effectively improved the long-term antibacterial effect after irrigation and re-culture for 6 h.ConclusionsCompared with CNI, PIPS has greater ability to remove bacteria in root canals with a small preparation diameter and a small taper. PIPS with 2% and 5.25% NaOCl exhibited superior antibacterial and bacteriostatic effects.