Logic Elements Research Articles

The interstrain differences in laboratory mouse cognitive abilities (elementary logic task, attention, memory)

Mice of two strains, selected, respectively, for successful solution of puzzle-box test (addressed to “object permanence” rule operation) and for non-solution of this test, were tested for short term memory, attention to moving object and neophagia. The data obtained demonstrated, that mice, selected for successful “object permanence” test solution demonstrated higher scores in recent memory and attention indices. It was suggested, that interstrain differences discovered should be addressed to differences in the “executive functions” expression.

Structure and function of the proton channel OTOP1

OTOP1 belongs to the otopetrin family of membrane proteins that form proton channels in cells of diverse types. In mammals, OTOP1 is involved in sour transduction in taste cells and contributes to otoconia formation in the inner ear. From the structural point of view, otopetrins, including OTOP1, represent a quasi-tetramer consisting of four α-barrels. The exact transport pathways mediating proton flux through the OTOP1 channel and gating units modulating its activity are still a matter of debate. This review discusses current data on structural and functional features of OTOP1. Suggested proton transport pathways, regulatory mechanisms, and key amino acid residues determining functionality of the otopetrins are considered. The existing kinetic models of OTOP1 are discussed as well. Based on revealed functional properties, OTOP1 is suggested to operate as a logical XOR element that allows for proton flux only if transmembrane pH gradient exists.

FPGA implementation of sobel edge detection algorithm

Sobel Edge detection algorithm is used to extract the edges (region of maximum variation) from an image. It is based on the concept that the edges of an image contains maximum information whose computation depends on multipliers and square root. As multipliers consume more logic, a modified sobel edge detection algorithm which does not employ multipliers and square root function is proposed. A mathematical model of the proposed sobel edge algorithm was first developed and MATLAB was used to verify the model. On comparing with the original model, the proposed model has a SSIM of 96.43%. To analyse the hardware complexity, Verilog model of the modified sobel edge detection algorithm was developed using Quartus II. The chosen evaluation board is Cylone III FPGA EP3C120F780. The performance metrics such has Logic Elements utilization, Power dissipation and Maximum Operating Frequency were obtained. Open-Source toolchain (Yosys, OpenVPR, and Google Skywater 130nm PDK) was used to obtain the RTL Netlist and Synthesis reports. Verilog Modules for the Camera (CMOS OV7670) interface and FIFO Buffer were synthesized. The modified algorithm was integrated with them. An HSMC (HSMB) breakout board was connected to the FPGA Development board to increase the number of I/O ports. Thus in real time, the proposed modified Sobel Edge detection system can be used as a pre-processor to reduce the amount of computations and power consumption.

Ln3+-doped glasses: Advancing molecular logic for integration into photonic and electronic devices

The rapid miniaturization of electronic devices has pushed the limits of conventional silicon-based technologies, creating a pressing need for novel approaches to sustain the exponential growth of computing power. This study explores the innovative application of Ln3+-doped glasses in developing molecular logic systems as a potential solution. Exploiting Eu3+ and Dy3+, we investigated the luminescence properties under various physical stimuli such as excitation wavelength and temperature. Our findings reveal the capability to construct logic elements of varying complexity, from simple AND and OR gates to advanced FULL-ADDER and FULL-SUBTRACTOR circuits. This work represents the first instance of using Ln3+ exclusively for molecular logic via physical stimuli. The robust and stable optical properties of the doped glasses enable their integration into conventional electronic and photonic devices, potentially revolutionizing the landscape of molecular logic and computing. This research not only enhances the understanding of light-matter interactions in Ln3+-doped systems but also opens new pathways for the development of miniaturized, high-performance innovative computational devices.

Vulnerability of AND/OR logic networks under cascading failures

Cascading failures in AND/OR logic networks present a critical challenge in domains such as digital circuits and communication systems where reliability and resilience are paramount. This work investigates the vulnerability of AND/OR logic networks under cascading failures by examining the propagation mechanisms, failure modes, and robustness of such systems. In detail, we propose a hybrid fault propagation model based on the basic principles of AND/OR logic operations. Then, by utilizing both analytical and simulation approaches, we explore how initial localized disruptions can escalate through interconnected logical elements and lead to widespread system failures. Notably, it is shown that a Sigmoid function can be developed to quantify the vulnerability of the complex logic network. Moreover, the phase transition of the failures against the logic parameters is depicted and it is illustrated that the phase transition point is independent of the AND links. This study contributes to the understanding of cascading dynamics in logical networks and could facilitate design of feasible strategies for mitigating these vulnerabilities and recovering from substantial failures.

The effect of low-intensity radiation on the speed of CMOS microcircuits

Aim. The degradation of CMOS microcircuits exposed to ionizing radiation was analysed. Three MOS defect formation processes at the Si-SiO2 boundary were examined. Methods. Using the example of test logic elements, the dependence of the time of conditional speed failure on the gamma dose rate was analysed. Findings. A critical defect at the Si-SiO2 boundary was identified. Conclusions. The approach proposed in the paper allows identifying the causes of CMOS microcircuit failures. Calculated failure times for three dose rates are presented.

A Review of Physical and Logical Design in IoT: Comparative Analysis of Devices, Protocols, Communication Models, and APIs

The Internet of Things (IoT) has emerged as a transformative technology, enabling connectivity and data exchange among a vast network of devices. This paper presents a comprehensive comparative analysis of the physical and logical design elements of IoT systems, focusing on IoT devices, communication protocols, models, and APIs (REST and WebSocket). The research highlights the critical role that both physical and logical components play in ensuring efficient, secure, and scalable IoT deployments. By examining the integration of these aspects, the paper aims to provide insights for optimizing IoT architectures for various use cases, particularly in resource-constrained environments.

Topological logical elements based on defect-mediated sound-wave manipulation

Topological logical elements based on defect-mediated sound-wave manipulation

Proposed Business Strategy In Sulawesi And Maluku Region: A Case Study of Xyz

The world economy is contracting because of war and widespread inflation. The Indonesian economy is still growing faster than the world average, though—roughly 5–6% faster. As a result, the company's growth and profitability in Indonesia depend on its growth plan. Services and consumables make up the Indonesia business area of XYZ. Although XYZ is already a key player in the services and consumables industry, to stay in line with the company's strategy, XYZ must grow in the Sulawesi and Maluku regions. According to current market understanding, mining is a rapidly expanding industry in Indonesia. As a result, mining is the best industry to investigate for XYZ services and consumables, and it is the best growth plan in this sector to increase the company's revenue. In order to perform this study, a framework for business strategy research is created, data is gathered, and research is reviewed. Structured interviews with respondents from all throughout Indonesia are used to gather data. Questions are posed to many departments inside the respondent's organization, including the management, sales, customer service, operations, repair, and logistics departments. The VRIO, PESTEL, PORTER Five Forces, and SWOT methods will be used to analyze the internal and external circumstances that are relevant to this investigation. Choosing the best approach to grow the Sulawesi and Maluku regions is crucial to increasing the revenue for XYZ in Indonesia. Using the Diamond Strategy framework is one of the methods used to formulate a strategy to achieve the objective. This framework can define each element of Arenas, Vehicles, Differentiators, Staging, and Economic Logic. Finally, XYZ anticipates it will include a clear implementation plan to execute this proposed strategy. With this, XYZ will be able to increase its revenue in Indonesia further.

Logical Resonance in Izhikevich Neuron

This paper proposes a new logic element model based on an Izhikevich (IZ) neuron and neural system that emulates two- and three-state logic behaviours. In a noise-free environment, with a periodic current of suitable amplitude and frequency, the IZ system is capable of performing logical AND and OR operations. Initially, a single IZ neuron demonstrates membrane dynamics in response to an input signal generated by combining two-state logic currents below the threshold. Subsequently, an IZ neural system model is introduced to enhance the reliability and resilience of the system. This model is characterised by electrical coupling with fast conduction and chemical coupling with a more adaptable structure. Each logic input independently influences each neuron within the system. Additionally, it has been observed that the reliability of the logic element is influenced by changes in synaptic strength, with a neural system lacking sufficient synaptic strength failing to generate logical output. Furthermore, the system displays a three-state logic behaviour under suitable forcing periodicity, thus enhancing the power efficiency of the logic element. The proposed IZ neuron and neural system are expected to significantly impact the development of brain-inspired logic elements.

Understanding the shift: contextual determinants of classic and alternative servitisation trajectories

PurposeWhile servitization has been recognised for its potential to augment organizational revenue and fortify competitive advantage, the exploration of alternative servitization trajectories to the classical servitization model has been little explored in literature. Recent literature introduces the “service paradox” and presents different trajectories to the classical model, but it does not explain why a company chooses one trajectory instead of another. Therefore, this study aims to provide a model that, based on the contextual factors present, recommends which servitization trajectory the company should choose.Design/methodology/approachThis study uses a combination of design science research (DSR) and context, intervention, mechanisms and outcomes (CIMO) to propose the model. An initial contextual factors list was created based on the literature, refined by the company’s employees and evaluated in three selected initiatives in the focal company. Furthermore, based on the understanding of the CIMO logic elements, four design propositions were elaborated to summarize the main findings of the study.FindingsThe study has demonstrated that the choice of a servitisation trajectory is intricately tied to a multitude of contextual factors, prompting organisations to deviate from conventional models towards alternative paths. Furthermore, the research sheds light on the underlying mechanisms and contextual drivers that shape servitisation decisions within the context of a consumer goods manufacturer. The analysis underscores the pivotal role of market dynamics and strategic adaptability in shaping servitisation strategies, underscoring the importance of customized approaches that cater to the distinct circumstances of each organisations.Originality/valueThe research contributes to both theory and practice by offering profound insights into the complex nature of servitisation, advocating for continuous adaptation and strategic alignment with market demands. For practitioners and decision-makers, the study provides valuable guidance on enhancing service offerings and navigating the complexities of servitisation within specific sectors, fostering a culture of learning and adaptation to drive sustainable growth.

Shunt-free cryogenic memory using ferromagnetic insulator-based Josephson junctions

Magnetic Josephson junctions are the preferred candidate devices for designing fast and scalable cryogenic memory elements. This is especially the case for rapid single-flux quantum-based superconducting electronics, where the speed mismatch between logic and memory elements have remained a long-standing challenge. In this Letter, we demonstrate a simple tri-layer Josephson memory device using ferromagnetic insulating (FI) GdN-based S/FI/S vertical mesa-type junctions, with reliable nonvolatile memory operation without the need of a shunt resistor at 4.2 K. The characteristic frequency of our devices is approximately 90 GHz, corresponding to an IcRn product of 177 μV. We demonstrate a thorough study of the parameter spaces required for designing these devices and identify the scope for future improvements that can lead to further miniaturization and higher operating speed of these devices.

The control unit of the combined photovoltaic/thermal system

During the last years the design and implementation of energy-saving solutions remains a relevant and integral task for implementation the route of decreasing carbon emissions and reduce the negative impact on the environment. Using combined photovoltaic/thermal systems is limited by their high price connected mainly with the complexity of their control systems, even taking into account availability of government programs for financial support for the use of alternative energy. The novelty of the proposed work consists in the development of a mathematical model and the analytical study of the control system of combined photovoltaic/thermal system for research the operation of control and logic elements and their response to transient and emergency modes during such systems operation. Aim of the work - operational analysis, analytical and optimization studies of the control system of the combined photovoltaic/thermal system to ensure reliable operation in transient and emergency modes and significantly simplify the design of such a system. In this article was implemented mathematical modeling methods and using specialized software. As a result of the work the mathematical model of the control system of combined photovoltaic/thermal system which operates with variable set of control and logic elements was developed. A structural solution of the control system is proposed for further implementation and field testing. The response criteria of the control system to transient and emergency operation modes of the combined photovoltaic/thermal system have been developed. Practical value. It was established the permissible and critical values of a number of parameters characterizing the operation of combined photovoltaic/thermal system in normal mode and deviations from which indicate the presence of an emergency situation are determined. The proposed algorithms of the control system will make it possible to increase the reliability of combined photovoltaic/thermal system and reduce the risk of emergency situations during field tests and further operation.

Software-Bus-Toolchain (SBT): Introducing a Versatile Method for Quickly Implementing (I)IoT-Scenarios

The Internet of Things (IoT) has become ubiquitous. IoT devices are applied in a multitude of applications, e.g., in smart home scenarios, building automation, smart energy and smart cities, healthcare, and industrial environments. Fast and efficient implementation and roll-out of IoT devices is a critical factor for successs and acceptance of IoT devices. At the same time, the variety of hardware platforms that can be used for IoT applications, as well as the number of IoT orchestration platforms is increasing. Finding the right combination of tooling and hardware is not trivial, but essential for building applications that provide value. In this work, a Software-Bus-Toolchain (SBT) is introduced that encapsulates firmware design, data point definition, and communication protocol usage. Furthermore, an IoT control platform is provided to control and evaluate the IoT modules. Thus, using the SBT, solely the business logic has to be designed, while the hardware-design is automated to a high degree. Usage of the Zephyr framework allows the interchange of hardware modules, while interfaces provide easy adaption of data points and communication capabilities. The implementation of interfaces to the IoT-platform as well as to the communication layer provides a universal usage of logic and data elements. The SBT is evaluated in two application scenarios, where its flexible nature is shown.

Synthesis of an electronic control module for a selected technological node with a focus on its automation

The article presents problems related to the design of sequential control systems using algorithmic design method. Based on a graph describing the functions of signal processing, the method of fast programming of sequential electro-pneumatic systems and systems with logic elements is presented. The developed sequential system was verified through simulation using the FluidSim computer-aided design software from Festo.

Logic Gates Based on 3D Vertical Junctionless Gate-All-Around Transistors with Reliable Multilevel Contact Engineering.

Vertical gate-all-around (V-GAA) represents the ultimate configuration in the forthcoming transistor industry, but it still encounters challenges in the semiconductor community. This paper introduces, for the first time, a dual-input logic gate circuit achieved using 3D vertical transistors with nanoscale sub-20-nm GAA, employing a novel technique for creating contacts and patterning metallic lines at the bottom level without the conventional lift-off process. This involves a two-step oxidation process: patterning the first field oxide to form bottom metal lines and then creating the gate oxide layer on nanowires (NWs), followed by selective removal from the top and bottom of the nanostructures. VGAA-NW transistors, fabricated using the lift-off-free approach, exhibit improved yield and reduced access resistance, leading to an enhanced drive current while maintaining good immunity against short-channel effects. Finally, elementary two-input logic gates within a single cell, using VNW transistors, demonstrate novel possibilities in advanced logic circuitry design and routing options in 3D.

Realization of skyrmion shift register

The big data explosion demands novel data storage technology. Among many different approaches, solitonic racetrack memory devices hold great promise for accommodating nonvolatile and low-power functionalities. As representative topological solitons, magnetic skyrmions are envisioned as potential information carriers for efficient information processing. While their advantages as memory and logic elements have been vastly exploited from theoretical perspectives, the corresponding experimental efforts are rather limited. These challenges, which are key to versatile skyrmionic devices, will be studied in this work. Through patterning concaved surface topography with designed arrays of indentations on standard Si/SiO2 substrates, we demonstrate that the resultant non-flat energy landscape could lead to the formation of hexagonal and square skyrmion lattices in Ta/CoFeB/MgO multilayers. Based on these films, one-dimensional racetrack devices are subsequently fabricated, in which a long-distance deterministic shifting of skyrmions between neighboring indentations is achieved at room temperature. Through separating the word line and the bit line, a prototype shift register device, which can sequentially generate and precisely shift complex skyrmionic data strings, is presented. The deterministic writing and long-distance shifting of skyrmionic bits can find potential applications in transformative skyrmionic memory, logic as well as the in-memory computing devices.

High-efficiency all-optical switching based on broadband coherent perfect absorption in an atom-cavity system

We propose an ultrahigh-efficiency and broadband all-optical switching scheme based on coherent perfect absorption (CPA) in linear and nonlinear excitation regimes in a cavity quantum electrodynamics (CQED) system. Two separate atomic transitions are excited simultaneously by two signal fields coupled from two ends of an optical cavity under the collective strong coupling condition. Three polariton eigenstates are produced which can be tuned freely by varying system parameters. The output field intensities of multiple channels are zero when the CPA criterion is satisfied. However, destructive quantum interference can be induced by a free-space weak control laser when it is tuned to be resonant to the polariton state. As a consequence, the CQED system acts as a coherent perfect light absorber/transmitter as the control field is turned on/off the polariton resonances. In particular, the proposed scheme may be used to realize broadband multi-throw all-optical switching in the nonlinear excitation regime. The proposed scheme is useful for constructing all-optical routing, all-optical communication networks and various all-optical logic elements.

Developing Achievement in Mathematics, Specifically in Elementary Logic, through Brain-Based Learning (BBL) Combined with Skill Practice Exercises for Grade 10 Students

This research aims to: 1) Develop an effective Brain-Based Learning (BBL) plan combined with skill practice exercises for Grade 10 students, achieving a performance criterion of 70/70; 2) Compare the learning outcomes in elementary logic before and after implementing the BBL approach combined with skill practice exercises for Grade 10 students; 3) Study the satisfaction level of students towards the BBL approach combined with skill practice exercises for Grade 10 students. The sample group consisted of 39 students from Grade 10 room 4 in the first semester of the 2023 academic year, selected through purposive sampling. Research tools included a learning management plan, an achievement test, skill practice exercises, and a satisfaction questionnaire. Data were analyzed using percentages, mean, standard deviation, and dependent samples t-test. The research found that: 1) The BBL-based learning management plan for elementary logic for Grade 10 students was effective, with performance levels of 95.69/81.28, exceeding the set criterion of 70/70; 2) The academic achievement of students who underwent the BBL-based learning in elementary logic for Grade 10 students significantly improved post-learning, at a .05 level of statistical significance; 3) Students were highly satisfied with the BBL-based learning approach combined with skill practice exercises in elementary logic for Grade 10 students, with a mean satisfaction score of 4.86.

Demonstration of high-impedance superconducting NbRe Dayem bridges

Here, we demonstrate superconducting Dayem-bridge weak-links made of different stoichiometric compositions of NbRe. Our devices possess a relatively high critical temperature, normal-state resistance, and kinetic inductance. In particular, the high kinetic inductance makes this material a good alternative to more conventional niobium-based superconductors (e.g., NbN or NbTiN) for the realization of superinductors and high-quality factor resonators, whereas the high normal-state resistance yields a large output voltage in superconducting switches and logic elements realized upon this compound. Moreover, out-of-plane critical magnetic fields exceeding 2 T ensure that possible applications requiring high magnetic fields can also be envisaged. Altogether, these features make this material appealing for a number of applications in the framework of quantum technologies.