Local Tissue Reaction Research Articles

Wear, Material Transfer, and Electrocautery Damage Are Ubiquitous on CoCrMo Femoral Knee Retrievals.

Despite high total knee arthroplasty (TKA) survivorship after 10 years (92%-99%), a gap persists where patient satisfaction lags clinical success. Additionally, while cobalt chrome molybdenum (CoCrMo) use decreases in primary total hip arthroplasty, the alloy continues to be widely used in TKA femoral components. Invivo, CoCrMo degradation may be associated with adverse local tissue reactions (ALTR) and compared with the hip, the damage mechanisms that may release metal in the knee and the potential biological effects remain poorly understood. In this study, we characterized the damage on 50 retrieved CoCrMo femoral knee implants paired with 19 titanium alloy and 31 CoCrMo tibial baseplates. We asked (1) what damage modes can release CoCrMo debris invivo from femoral components and (2) how frequently does the damage occur? First, we developed a semiquantitative scoring system for abrasive wear. Then, we characterized damage modes on CoCrMo femoral implants using digital optical microscopy (DOM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). We found that wear, electrocautery damage, and Ti-6Al-4V material transfer were ubiquitous. Of the 50 CoCrMo femoral implants we investigated, we documented wear on 100% (n = 50/50), electrocautery damage on 98% (n = 49/50), and Ti-6Al-4V material transfer to the posterior condyles on 95% (n = 18/19). Our results suggest that these damage modes may be more prevalent than previously thought and may act as metal release mechanisms invivo.

Biocompatibility of Water-Dispersible Pristine Graphene and Graphene Oxide Using a Close-to-Human Animal Model: APilot Study on Swine.

Graphene-based materials (GBMs) are of considerable interest for biomedical applications, and the pilot study on the toxicological and immunological impact of pristine graphene (GR) and graphene oxide (GO) using swine as a close-to-human provides valuable insights. First, ex vivo experiments are conducted on swine blood cells, then GBMs are injected intraperitoneally (i.p.) into swine. Hematological and biochemical analyses at various intervals indicate that neither GO nor GR cause systemic inflammation, pro-coagulant responses, or renal or hepatic dysfunction. Importantly, no systemic toxicity is observed. Analysis of a panel of 84 immune-related genes shows minimal impact of GO and GR. The animals are sacrificed 21 days post-injection, and transient absorption imaging and Raman mapping show the presence of GO and GR in the mesentery only. Histological evaluation reveals no signs of alterations in other organs. Thus, clusters of both materials are detected in the mesentery, and GO aggregates are surrounded only by macrophages with the formation of granulomas. In contrast, modest local reactions are observed around the GR clusters. Overall, these results reveal that i.p. injection of GBMs resulted in a modest local tissue reaction without systemic toxicity. This study, performed in swine, provides essential guidance for future biomedical applications of graphene.

Do Intra-articular Metal Ion Levels Predict Adverse Local Tissue Reaction in Revision Total Hip Arthroplasty for Mechanically Assisted Crevice Corrosion?

BackgroundMechanically assisted crevice corrosion is a complication that may occur in vivo at modular metal interfaces following metal-on-polyethylene total hip arthroplasty (THA). Metal ions released in vivo may be associated with adverse local tissue reactions (ALTRs). While there is no definitive value, high serum ion levels are implicated as contributors to ALTR, and various screening levels have been recommended. The purpose of this investigation was to evaluate the relationship between synovial fluid (SF) cobalt and chromium ion levels and the risk of developing ALTR. MethodsThis was a retrospective cohort study of 552 patients who underwent 621 metal-on-polyethylene primary THAs. A total of 69 patients underwent revision THA due to symptomatic primary failure with elevated serum metal ions levels. There were 28 who had preoperative serum and intraoperative SF chromium and cobalt samples. Patient demographics, surgical, and laboratory data were collected. Descriptive statistics, Mann-Whitney U, analysis of variance tests, and linear regression analyses were performed. ResultsThere were 40.6% of revisions that had preoperative serum and intraoperative SF samples. The mean time to revision was 5.7 (range, 3.8 to 7.6) years. Mean SF cobalt and chromium levels were 870.9mcg/L (range, 1.1 to 8,300.0) and 573.5mcg/L (range, 1.3 to 10,000.0). Mean serum and SF cobalt-chromium ratios were 4.0 (range, 0.9 to 7.1) and 6.4 (range, 0 to 15.1), respectively. Elevated serum cobalt levels were predictive of ALTR (P = 0.002), SF levels were not. Analysis of preoperative serum to SF cobalt-chromium ratios showed poor correlation (R2 = 0.05). ConclusionsThere was no correlation between SF ion levels and ALTR. Also, serum and intra-articular ion levels did not correlate. The SF levels did not provide additional value over serum levels for diagnosis or prognosis of mechanically assisted crevice corrosion. Further studies are needed to better understand the relationship between serum and SF ion levels and its relationship to ALTR.

Multivariate analysis of oral mucosal ulcers during orthodontic treatment.

Orthodontic treatment can easily cause local soft tissue reactions in the oral cavity of patients under mechanical stress, leading to oral mucosal ulcers and affecting their quality of life. At present, only limited literature has explored the factors leading to oral ulcers in orthodontic treatment, and these research results are still controversial. To investigate the current status and related factors of oral mucosal ulcers during orthodontic treatment, aiming to provide a valuable reference for preventing this disease in clinical practice. A total of 587 patients who underwent orthodontic treatment at the Peking University School of Stomatology and Hospital of Stomatology between 2020 and 2022 were selected and allocated to an observation or control group according to the incidence of oral mucosal ulcers during orthodontic therapy. A questionnaire survey was constructed to collect patient data, including basic information, lifestyle and eating habits, treatment details, mental factors, and trace element levels, and a comparative analysis of this data was performed between the two groups. A logistic regression model with oral ulcers as the dependent variable was established. The regression results showed that age (≥ 60 years: odds ratio [OR]: 6.820; 95% confidence interval [CI]: 2.226-20.893), smoking history (smoking: OR: 4.434; 95%CI: 2.527-7.782), toothbrush hardness (hard: OR: 2.804; 95%CI: 1.746-4.505), dietary temperature (hot diet: OR: 1.399; 95%CI: 1.220-1.722), treatment course (> 1 year: OR: 3.830; 95%CI: 2.203-6.659), and tooth brushing frequency (> 1 time per day: OR: 0.228; 95%CI: 0.138-0.377) were independent factors for oral mucosal ulcers (P < 0.05). Furthermore, Zn level (OR: 0.945; 95%CI: 0.927-0.964) was a protective factor against oral ulcers, while the SAS (OR: 1.284; 95%CI: 1.197-1.378) and SDS (OR: 1.322; 95%CI: 1.231-1.419) scores were risk factors. Age ≥ 60 years, smoking history, hard toothbrush, hot diet, treatment course for > 1 year, tooth brushing frequency of ≤ 1 time per day, and mental anxiety are independent risk factors for oral mucosal ulcers. Therefore, these factors should receive clinical attention and be incorporated into the development and optimization of preventive strategies for reducing oral ulcer incidence.

A RANDOMIZED CONTROLLED TRIAL OF A CONVENTIONAL VERSUS MODULAR DUAL-MOBILITY BEARING: ARE SERUM METAL LEVELS A CONCERN?

The purpose of this randomized controlled trial was to evaluate serum metal levels in patients undergoing total hip arthroplasty (THA) with a conventional compared to a modular dual-mobility bearing.Patients undergoing primary THA for osteoarthritis were randomized to receive either a modular dual-mobility or conventional polyethylene bearing. All patients received the same titanium acetabular and femoral component and a ceramic femoral head. Serum metal levels were drawn pre-operatively then annually for a minimum of two years postoperatively. An a priori power analysis determined that 40 patients (20 per cohort) were needed to identify a clinically relevant difference in serum cobalt of 0.35 ng/ml (ppb) at 90% power.Forty-six patients were randomized to a modular dual-mobility (n=25) or conventional bearing (n=21) with 40 at a minimum follow-up of two years. No differences in serum cobalt (mean 0.14 ppb [range, 0.075–0.29] vs. 0.20 ppb [range, 0.075–0.57], p=0.39) or chromium levels (mean 0.14 ppb [range, 0.05–0.50] vs. 0.12 ppb [range, 0.05–0.35], p=0.65) were identified between the modular dual-mobility and conventional cohorts, respectively.There was no statistically significant difference in serum Co or Cr at two years postoperatively in subjects implanted with a ceramic head and this particular dual mobility bearing in comparison to a ceramic head and a conventional acetabular component. While modest expected elevations in serum Co and Cr were observed in the dual mobility group, in no case did the Co level exceed the laboratory reference range nor the threshold of one part per billion that has been associated with adverse local tissue reactions to mechanically-assisted crevice corrosion.

Examining the "revisability" benefit of hip resurfacing arthroplasty.

Hip resurfacing arthroplasty (HRA) is an alternative to total hip arthroplasty (THA) that is typically reserved for young active patients because it preserves bone. However, the benefits of HRA only hold true if conversion THA after failed HRA provides acceptable outcomes. To compare patient reported outcomes for conversion THA after HRA failure to primary THA. A retrospective review of 36 patients (37 hips) that underwent conversion THA for failed HRA between October 2006 and May 2019 by a single surgeon was performed. Patient reported outcomes [modified Harris Hip Score (mHHS), University of California Los Angeles (UCLA) activity score] were obtained via an email-based responder-anonymous survey. Outcomes were compared to normative data of a primary THA cohort with similar demographics. Subgroup analysis was performed comparing outcomes of conversion THA for adverse local tissue reaction (ALTR) vs all other causes for failure. The study group had a lower mHHS than the control group (81.7 ± 13.8 vs 90.2 ± 11.6, P < 0.01); however, both groups had similar UCLA activity levels (7.5 ± 2.3 vs 7.2 ± 1.6, P = 0.51). Patients that underwent conversion for non-ATLR causes had similar mHHS (85.2 ± 11.5 vs 90.2 ± 11.6, P = 0.11) and higher UCLA activity levels (8.5 ± 1.8 vs 7.2 ± 1.6, P < 0.01) compared to the control group. Patients that underwent conversion for ATLR had worse mHHS (77.1 ± 14.5 vs 90.2 ± 11.6, P < 0.01) and UCLA activity levels (6.1 ± 2.3 vs 7.2 ± 1.6, P = 0.05) when compared to the control group. Patient outcomes equivalent to primary THA can be achieved following HRA conversion to THA. However, inferior outcomes were demonstrated for ALTR-related HRA failure. Patient selection and perhaps further studies examining alternative HRA bearing surfaces should be considered.

Galacturonic acid-capsaicin prodrug for prolonged nociceptive-selective nerve blockade

There is an urgent clinical need to develop nerve-blocking agents capable of inducing long duration sensory block without muscle weakness or paralysis to treat post-operative and chronic pain conditions. Here, we report a galacturonic acid-capsaicin (GalA-CAP) prodrug as an effective nociceptive-selective axon blocking agent. Capsaicin selectively acts on nociceptive signaling without motor nerve blockade or disruption of proprioception and touch sensation, and the galacturonic acid moiety enhance prodrug permeability across the restrictive peripheral nerve barriers (PNBs) via carrier-mediated transport by the facilitative glucose transporters (GLUTs). In addition, following prodrug transport across PNBs, the inactive prodrug is converted to active capsaicin through linker hydrolysis, leading to sustained drug release. A single injection of GalA-CAP prodrug at the sciatic nerves of rats led to nociceptive-selective nerve blockade lasting for 234 ± 37 h, which is a sufficient duration to address the most intense period of postsurgical pain. Furthermore, the prodrug markedly mitigated capsaicin-associated side effects, leading to a notable decrease in systemic toxicity, benign local tissue reactions, and diminished burning and irritant effects.

Failure Following Revision Total Hip Arthroplasty After Cobalt-Chrome Femoral Heads are Placed on a Retained Femoral Stem

BackgroundFailure due to trunnionosis with adverse local tissue reaction (ALTR) has been reported with cobalt-chrome (CoCr) heads in total hip arthroplasty (THA); however, there are limited data on the use of these heads in the revision setting. The purpose of this study was to analyze the outcomes of patients who underwent revision THA with a retained femoral component and received a CoCr femoral head on a used trunnion. MethodsIn this retrospective review, we identified all patients who underwent revision THA with a retained femoral component and received a CoCr femoral head between February 2006 and March 2014. Demographic factors, implant details, and postoperative complications, including the need for repeat revisions, were recorded. In total, 107 patients were included (mean age 67 years, 74.0% women). Of the 107 patients, 24 (22.4%) required repeat revisions. ResultsPatients who required repeat revision were younger than those who did not (mean age: 62.9 versus 69, P = .03). The most common indications for repeat revision were instability (8 of 24, 33.3%), ALTR (5 of 24, 20.8%), and infection (4 of 18, 16.7%). Evidence of ALTR or metallosis was identified at the time of reoperation in 10 of the 24 patients who underwent re-revision (41.7%). ConclusionsThe placement of a new CoCr femoral head on a used trunnion during revision THA with a retained femoral component carries a significant risk of complication (22.4%) and should be avoided when possible.

Under-reporting by surgical pathologists in tissue removed during revision surgery for metal-on-metal arthroplasties.

Although adverse local tissue reactions (ALTR) have been reported for metal-on-metal implants (MoM) requiring early revision surgery, no study has looked at the accuracy of surgical pathologists in diagnosing ALTR. This study aims to investigate the accuracy of reporting adverse local tissue reactions in tissue samples following revision surgery from metal-on-metal implants. The authors reviewed histology glass slides as well as the original pathology reports of tissue processed in revision arthroplasties in 23 cases. These samples were microscopically analyzed for tissue necrosis and cystic degeneration, the presence of metal particles, corrosion byproducts, membrane formation, histiocytic cells, lymphocytic cells, and vascular pathology. The authors' findings were then compared to their corresponding original pathology reports. The authors found consistent under-reporting of the tissue findings. Most importantly, 18 samples showed evidence of metal present compared to 2 samples on original pathology reporting. The authors found that 15 samples showed evidence of pathological membranous tissue compared to just 6 on original pathology reporting. While just 3 of the original pathology reports indicated the presence of areas of predominantly lymphocytic inflammatory cells, the authors found 13 examples of such areas. Although ALTR reactions have been described as a sequala of failed MoM, the authors' data suggest that ALTR may occur more frequently than previously described. Under-reported findings of ALTR deprive both the patient and orthopaedic surgeon of important information that can help guide further follow-up.

Extreme Serum Titanium Concentration Induced by Acetabular Cup Failure: Unveiling a Unique Scenario of Titanium Alloy Debris Accumulation.

The majority of contemporary total hip arthroplasty (THA) implants are constructed from Ti alloys, which are generally believed to generate fewer adverse local tissue reactions (ALTRs) compared to CoCr alloys. This study presents a case of unusual primary THA failure where a substantial release of Ti alloy debris was observed. A 52-year-old active male underwent THA after post-traumatic aseptic necrosis of the femoral head in 2006. Seventeen years after the procedure, the patient presented with groin pain and a restricted range of motion. X-rays revealed the protrusion of the alumina ceramic head through the Ti6Al4V acetabular cup. Trace element analysis indicated significantly elevated levels of serum Ti, Al, and V. CT and MRI confirmed Ti alloy cup failure and a severe ALTR. During revision surgery, it was found that the worn-out ceramic head was in direct contact with the acetabular cup, having protruded through a central hole it had created over time. No acetabular liner was found. Histological analysis of his tissue samples showed wear-induced synovitis with areas of multinucleated foreign body giant cells and the accumulation of numerous metal particles but no acute inflammatory response. Six months after the revision THA, the patient has experienced favourable outcomes. This case provides an instructive illustration for studying the consequences of the substantial release of Ti alloy debris from orthopedic implants.

Association of Total Hip Arthroplasty Flexural Rigidity With Magnetic Resonance Imaging and Histological Findings

BackgroundModular connections in total hip arthroplasty (THA) offer surgical advantages, but can contribute to implant fretting and corrosion due to micromotion at the head–stem interface. Previous studies implicated lower flexural rigidity as a key contributing factor to THA corrosion and fretting, but none associated flexural rigidity with direct histological evaluation or magnetic resonance imaging (MRI) outcomes. The purpose of this study was to determine how implant flexural rigidity is associated with MRI imaging metrics and histopathological outcomes in patients who have a failed THA. MethodsPatients requiring revision THA surgery underwent preoperative MRIs with 3-dimensional multispectral imaging techniques to suppress metal artifacts. The MRI images were graded for adverse local tissue reactions. For each hip, trunnion flexural rigidity was measured from the retrieved femoral stem, and a periprosthetic tissue sample was retrieved and evaluated using semiquantitative histology. Generalized linear models and analyses of variance were used to assess associations between flexural rigidity and MRI and histology outcomes. ResultsA total of 106 THA stems were retrieved (46 women and 60 men, age: 68 years (range, 60 to 73 years). After adjustment for length of implantation, flexural rigidity was negatively correlated with histologic aseptic lymphocyte-dominant vasculitis-associated lesion severity (β = −26.27, P = .018), Fujishiro lymphocyte grading (β = −13.4, P = .039), perivascular lymphocyte layers (β = −17.8, P = .022), the grade of tissue organization (β = −22.5, P = .009), the presence of diffuse synovitis (β = −66.5, P = .003), and the presence of lymphoid aggregates (β = −75.9, P = .022). No association was found between MRI metrics and flexural rigidity. ConclusionsAmong these implants, decreased trunnion stiffness was associated with increased histologic features of adverse host-mediated soft tissue reactions.

Safety and tissue remodeling assay of small intestinal submucosa meshes using a modified porcine surgical hernia model

In studies to date, meshes based on extracellular matrix (ECM) have been extensively used in clinical applications. Unfortunately, little is known about the function of the immunogenic residual, absorbable profile during the tissue repair process. Moreover, there needs to be a recognized preclinical animal model to investigate the safety and efficacy of extracellular matrix meshes. Herein, we designed and fabricated a kind of SIS mesh followed by a scanned electron micrograph characterization and tested α-Gal antigen clearance rate and DNA residual. In order to prove the biocompatibility of the SIS mesh, cell viability, chemotaxis assay and local tissue reaction were assessed by MTT and RTCA cytotoxicity test in vitro as well as implantation and degradation experiments in vivo. Furthermore, we developed a stable preclinical animal model in the porcine ventral hernia repair investigation, which using laparoscopic plus open hybridization method to evaluate tissue adhesion, explant mechanical performance, and histologic analysis after mesh implantation. More importantly, we established a semi-quantitative scoring system to examine the ECM degradation, tissue remodeling and regeneration in the modified porcine surgical hernia model for the first time. Our results highlight the application prospect of the improved porcine ventral hernia model for the safety and efficacy investigation of hernia repair meshes.

Application experience of bioresorbable implants in correcting the volume of the pleural cavity and their biocompatibility assessment

Objective: To substantiate experimentally the possibility of using bioresorbable biopolymer pleural implants made of polylactide and polycaprolactone (PLA/PCL) to correct the volume of the chest. Materials and methods. Rabbits were used as experimental animals — mature females of the Chinchilla breed, age 1–1.5 years, weight 3500–4300 g. The number of individuals were 5. For studying changes in implants and local tissue reactions in vivo, as close as possible to clinical conditions, the method of intrapleural implantation was used. Bio-resorbable highly porous samples based on polylactide and polycaprolactone (PLA/PCL) with different polymer ratios and porosity degrees were used as implants. The implant and local tissue reactions were evaluated over five implantation periods: 7, 21, 54, 66 and 78 weeks. Results. The study of morphology in implants during a long experiment showed good biocompatibility, which was confirmed by the absence of necrosis in implants and surrounding tissues. In the first and second implantation periods minimal reactive changes were detected in the adjacent soft tissues (lung, pleura, soft tissues of the chest wall), existing as a focal fibrosis of muscle fibers, focal mononuclear infiltration of fibrous tissue. Conclusion: As a result of studying morphological changes in the implant and adjacent tissues of the chest wall, the absence of necrosis and purulent-inflammatory changes both in the implant itself and in the surrounding tissues of the chest wall and lung was confirmed. It has been proven that a highly porous pleural implant based on polylactide and polycaprolactone is a safe and promising material for correcting the volume of the chest, which can be in demand both in general thoracic surgery and for the surgical treatment of patients with advanced pulmonary tuberculosis.

Cobalt and Chromium Ions Impair Macrophage Response to Staphylococcus aureus Infection.

Cobalt-chromium-molybdenum (CoCrMo) alloys are routinely used in arthroplasty. CoCrMo wear particles and ions derived from arthroplasty implants lead to macrophage-driven adverse local tissue reactions, which have been linked to an increased risk of periprosthetic joint infection after revision arthroplasty. While metal-induced cytotoxicity is well characterized in human macrophages, direct effects on their functionality have remained elusive. Synchrotron radiation X-ray microtomography and X-ray fluorescence mapping indicated that peri-implant tissues harvested during aseptic revision of different arthroplasty implants are exposed to Co and Cr in situ. Confocal laser scanning microscopy revealed that macrophage influx is predominant in patient tissue. While in vitro exposure to Cr3+ had only minor effects on monocytes/macrophage phenotype, pathologic concentrations of Co2+ significantly impaired both, monocyte/macrophage phenotype and functionality. High concentrations of Co2+ led to a shift in macrophage subsets and loss of surface markers, including CD14 and CD16. Both Co2+ and Cr3+ impaired macrophage responses to Staphylococcus aureus infection, and particularly, Co2+-exposed macrophages showed decreased phagocytic activity. These findings demonstrate the immunosuppressive effects of locally elevated metal ions on the innate immune response and support further investigations, including studies exploring whether Co2+ and Cr3+ or CoCrMo alloys per se expose the patients to a higher risk of infections post-revision arthroplasty.

Modern technologies in treatment of pilonidal sinus

Objective. Improvement of treatment results and reduction of the number of relapses in patients with pilonidal disease, by developing and substantiating a two-stage treatment method (with the use of laser treatment and subsequent radical surgical intervention). Materials and Methods. A prospective analysis of the treatment results of 76 patients at the clinical sites of the Rostov State Medical University was carried out. The patients were divided into three clinical observation groups: In Group I (the main group, 26 patients), two-stage treatment was carried out according to the original technique (patent № 2770283). In Group II (the first control group, 28 observations), we used the "сleft lift" procedure according to the Bascom authentic method Bascom II method modified by Karydakis). In Group III (the second control group, 22 observations), the pilonidal sinus was dissected with the traditional technique of plastic surgery of the sacrococcygeal region with "deaf" sutures along the gluteal cleft. Results. Analysis of the results showed that the postoperative period was smoother in Group I patients due to the smaller size of the surgical defect and the radical surgical stage in the absence of local inflammatory tissue reaction. There were no significant infiltrative-inflammatory complications in the patients operated on according to the original two-stage method. There were no recurrences during the one-year outpatient follow-up period. According to the VAS score, postoperative pain syndrome was significantly lower in Group I patients. The duration of hospitalization and period of disability were reduced in the patients of the main group in comparison with the same parameters in the control groups. The indicated pharmaco-economic effect in comparison with the traditional methods of surgical treatment was obtained due to early healing of the operative wounds with a smaller inflammatory reaction of the soft tissues and a reduced risk of suppurative complications. Conclusion. The developed method of two-stage surgical treatment of pilonidal sinus helps to increase the effectiveness of radical treatment, reduce the number of relapses and complications, and reduce the duration of patients' disability. The described efficacy of the technology is achieved with early healing and stable qualitative aesthetic result.

Early Periprosthetic Femur Fractures After Primary Cementless Total Hip Arthroplasty: High Risk of Periprosthetic Joint Infection and Subsequent Reoperation

BackgroundPeriprosthetic femur fracture (PFF) following total hip arthroplasty (THA) is a leading cause of early reoperation. The objective of this study was to compare rates of periprosthetic joint infection (PJI) and reoperation following PFFs occurring early postoperatively to those that occurred late. MethodsWe retrospectively identified 173 consecutive surgically managed PFFs following primary THA. Cases were categorized as “early” if they occurred within 90 days of THA (n = 117) or “late” if they occurred following the initial 90 days (n = 56). Mean age at time of PFF was 68 years (range, 26 to 96) and 60% were women. Mean body mass index was 29 (range, 16 to 52). Mean follow-up was 2 years (range, 0 to 13). Kaplan-Meier survival analysis estimated cumulative incidences of PJI and reoperation. ResultsEarly PFFs had higher 2-year cumulative incidence of PJI (11% versus 0%, P < .001) and reoperation (24% versus 13%, P = .110). Following early PFF, 27 patients required reoperation (ie, 13 for PJI, 5 for instability, 2 for re-fracture, 2 for painful hardware, 2 for non-union, 1 for adverse local tissue reaction, 1 for aseptic loosening, and 1 for leg-length discrepancy). Following late PFF, 5 patients required reoperation (ie, 3 for instability, 1 for re-fracture, and 1 for non-union). ConclusionsThere are greater incidences of PJIs and overall reoperations following early PFFs compared to late PFFs after THA. In addition to focusing efforts on prevention of early PFFs, surgeons should consider antiseptic interventions to mitigate the increased risk of PJI after treatment of early PFF.

Revealing the composite fretting-corrosion mechanisms of Ti6Al4V alloy against zirconia-toughened alumina ceramic in simulated body fluid

The composite fretting-corrosion damage due to combinations of radial, tangential, rotational, and other fretting causes local adverse tissue reactions and failure of artificial joints. Previous studies have mainly focused on the single fretting mode, while ignoring the coupled effects of multimode fretting. The fretting-corrosion mechanisms between the components are not yet fully understood. In this study, the tangential-radial composite fretting was realized by applying a normal alternating load to the tangential fretting. The composite fretting corrosion behavior of zirconia toughened alumina ceramic/Ti6Al4V alloy used for the head-neck interface of an artificial hip joint under simulated body fluid was investigated. The effects of displacement and alternating load amplitude were considered. The alternating load amplitude was given by the maximum normal load and minimum normal load ratio R. The results showed that the composite fretting damage mechanisms of this pair were mainly abrasion and tribocorrosion. Cracking also existed under large displacement. The effect of alternating load on fretting corrosion was found to be mainly caused by changes in the contact area and instantaneous contact state. In addition, the alternating load during the composite fretting promoted the formation of the three-body layer in the contact area. A decrease in load ratio caused fretting to change from gross to partial slip. In the case of small displacement, the load ratio had little effect on the friction work or wear scar profile. The corrosion rate of materials and the concentration of metal ions released into the solution increased as load ratio decreased. In cases of large and medium displacement, load ratio reduction increased the friction work and expanded the wear scar. The reduction in load ratio also caused the corrosion rate of the material to increase and then decrease, and the metal ion concentration decreased.

Transdermal wires for improved integration in vivo

Alternative engineering approaches have led the design of implants with controlled physical features to minimize adverse effects in biological tissues. Similar efforts have focused on optimizing the design features of percutaneous VAD drivelines with the aim to prevent infection, omitting however a thorough look on the implant-skin interactions that govern local tissue reactions. Here, we utilized an integrated approach for the biophysical modification of transdermal implants and their evaluation by chronic sheep implantation in comparison to the standard of care VAD drivelines. We developed a novel method for the transfer of breath topographical features on thin wires with modular size. We examined the impact of implant's diameter, surface topography, and chemistry on macroscopic, histological, and physical markers of inflammation, fibrosis, and mechanical adhesion. All implants demonstrated infection-free performance. The fibrotic response was enhanced by the increasing diameter of implants but not influenced by their surface properties. The implants of small diameter promoted mild inflammatory responses with improved mechanical adhesion and restricted epidermal downgrowth, in both silicone and polyurethane coated transdermal wires. On the contrary, the VAD drivelines with larger diameter triggered severe inflammatory reactions with frequent epidermal downgrowth. We validated these effects by quantifying the infiltration of macrophages and the level of vascularization in the fibrotic zone, highlighting the critical role of size reduction for the benign integration of transdermal implants with skin. This insight on how the biophysical properties of implants impact local tissue reactions could enable new solutions on the transdermal transmission of power, signal, and mass in a broad range of medical devices.

Human Histology after Structure Preservation Cochlear Implantation via Round Window Insertion.

Current surgical techniques aim to preserve intracochlear structures during cochlear implant (CI) insertion to maintain residual cochlear function. The optimal technique to minimize damage, however, is still under debate. The aim of this study is to histologically compare insertional trauma and intracochlear tissue formation in humans with a CI implanted via different insertion techniques. One recent temporal bone from a donor who underwent implantation of a full-length CI (576°) via round window (RW) insertion was compared with nine cases implanted via cochleostomy (CO) or extended round window (ERW) approach. Insertional trauma was assessed on H&E-stained histological sections. 3D reconstructions were generated and virtually re-sectioned to measure intracochlear volumes of fibrosis and neo-ossification. The RW insertion case showed electrode translocation via the spiral ligament. 2/9 CO/ERW cases showed no insertional trauma. The total volume of the cochlea occupied by fibro-osseous tissue was 10.8% in the RW case compared with a mean of 30.6% (range 8.7%-44.8%, N = 9) in the CO/ERW cases. The difference in tissue formation in the basal 5 mm of scala tympani, however, was even more pronounced when the RW case (12.3%) was compared with the cases with a CO/ERW approach (mean of 93.8%, range 81% to 100%, N = 9). Full-length CI insertions via the RW can be minimally traumatic at the cochlear base without inducing extensive fibro-osseous tissue formation locally. The current study further supports the hypothesis that drilling of the cochleostomy with damage to the endosteum incites a local tissue reaction. 4: Case-control study Laryngoscope, 134:945-953, 2024.

CUP-CAGE RECONSTRUCTION FOR MAJOR ACETABULAR DEFECTS: TEN-YEAR UPDATE OF FULL AND HALF CAGE CONSTRUCTS

Cup-cage constructs are one of several methods commonly used to treat severe acetabular bone loss during contemporary revision total hip arthroplasty. The purpose of this study was to provide a long-term results of the technique with emphasis on implant survivorship, radiographic results, and clinical outcomes for both full and half cup-cage reconstructions.We identified 57 patients treated with a cup-cage reconstruction for major acetabular bone loss between 2002–2012. All patients had Paprosky Type 2B through 3B bone loss, with 60% having an associated pelvic discontinuity. Thirty-one patients received a full cup-cage construct, and 26 a half cup-cage. Mean age at reconstruction was 66 years, 75% were female, and the mean BMI was 27 kg/m2. Mean follow-up was 10 years.The 10-year cumulative incidences of any revision were 14% and 12% for the full and half cup-cage construct groups, respectively. Of the 9 revisions, 3 were for dislocation, 2 for aseptic loosening and construct failure (both were pelvic discontinuities), 1 for adverse local tissue reaction, and 1 for infection with persistent pelvic discontinuity. The 10-year cumulative incidences of revision for aseptic loosening were 4.5% and 5% for the full and half cup-cage constructs, respectively. Of the unrevised cases, incomplete and non-progressive zone 3 radiolucent lines were observed in 10% of patients in each group. Three patients experienced partial motor and sensory sciatic nerve palsies (2 in the full and 1 in the half cup-cage group). Both the full and half cup-cage cohorts demonstrated significantly improved Harris hip scores.Full and half cup-cage reconstructions for major acetabular defects were successful at 10 years in regards to acetabular fixation without appreciable differences between the two techniques. However, zone 3 radiolucent lines were not uncommon in association with discontinuities, and dislocation continues to be a problem.