Lithium Ion Transference Number Research Articles

Self‐Extinguishing and Low‐Cost Quasi‐Solid Polymer Electrolyte for Room Temperature Lithium Metal Batteries

Most modification strategies of polyethylene oxide (PEO)‐based solid polymer electrolyte focus on improving the room temperature ionic conductivity, while disregarding its inherent flammability that poses substantial safety hazard. Herein, a self‐extinguishing quasi‐solid‐state polymer electrolyte (PTTF‐SPE), which combines excellent room temperature electrochemical properties and high safety, has been developed by introducing triethyl phosphate (TEP) as a low‐cost and highly effective flame retardant. The cross‐linking structure derived from ‐CH2‐CH2‐O‐ segments of tetramethylene glycol dimethyl ether (TEGDME) and PEO makes a contribution to a high amorphous state of polymer. A robust solid electrolyte interphase (SEI) formed by preferential decomposition of fluoroethylene carbonate (FEC) that acts as a film‐forming additive, which can prevent TEP from degradation at lithium metal anode. The optimized PTTF‐SPE exhibits high ionic conductivity (0.54×10‐3 S/cm) and lithium transference number (0.71) at room temperature. The LiFePO4||Li battery demonstrates excellent cycle life over 500 cycles at 0.5 C with a high average discharge capacity of 131 mAh/g. A symmetric Li||Li battery that operating for 850 hours indicates a good compatibility of PTTF‐SPE towards lithium metal. This work provides a new idea for developing high‐energy‐density and high‐safety lithium‐metal batteries (LMBs) for room temperature.

A Large-Scale Fabrication of Flexible, Ultrathin, and Robust Solid Electrolyte for Solid-State Lithium-Sulfur Batteries.

All-solid-state lithium metal batteries (ASSLMBs) are considered as the most promising candidates for the next-generation high-safety batteries. To achieve high energy density in ASSLMBs, it is essential that the solid-state electrolytes (SSEs) are lightweight, thin, and possess superior electrochemical stability. In this study, a feasible and scalable fabrication approach to construct 3D supporting skeleton using an electro-blown spinning technique is proposed. This skeleton not only enhances the mechanical strength but also hinders the migration of Li-salt anions, improving the lithium-ion transference number of the SSE. This provides a homogeneous distribution of Li-ion flux and local current density, promoting uniform Li deposition. As a result, based on the mechanically robust and thin SSEs, the Li symmetric cells show outstanding Li plating/stripping reversibility. Besides, a stableinterfacecontact between SSE and Li anode has been established with the formation of an F-enriched solid electrolyte interface layer. The solid-state Li|sulfurized polyacrylonitrile (Li|SPAN) cell achieves a capacity retention ratio of 94.0% after 350 cycles at 0.5 C. Also, the high-voltage Li|LCO cell shows a capacity retention of 92.4% at 0.5 C after 500 cycles. This fabrication approach for SSEs is applicable for commercially large-scale production and application in high-energy-density and high-safety ASSLMBs.

Utilizing methacrylated lignin as a sustainable macro-crosslinker for synthesizing innovative PVA/AMPS composites crosslinked hydrogel nanofibers: A potential application for lithium-ion battery separators

There are significant issues with commercial separators that must be resolved before they can be used in high-energy-density batteries. These problems include low porosity, poor electrolyte wetting, and low mechanical properties. This study presents a facile method for preparing composite crosslinked hydrogel nanofibers of polyvinyl alcohol (PVA) with 2-acrylamide-2-methylpropanesulfonic acid (AMPS) for lithium-ion battery separators by utilizing methacrylated lignin (LMA) as a bio-based crosslinker. Initially, LMA was synthesized by grafting glycidyl methacrylate (GMA) onto lignin via esterification. Subsequently, a crosslinked hydrogel nanofiber membrane (PVA/AMPS-LMA) was electrospun with varying LMA fractions, which were polymerized by combining free radical copolymerization and esterification reactions. The effectiveness of LMA as a crosslinker was assessed against the N, N′-methylene bisacrylamide (MBA). The study showed that using LMA as a crosslinker significantly improved the membrane's properties. The PVA/AMPS-LMA separator displayed superior features such as mechanical strength, thermal stability, porosity, electrolyte uptake, ionic conductivity, and lithium-ion transference number, when compared with PVA/AMPS, PVA, and Celgard separators. Specifically, the PVA/AMPS-LMA separator demonstrated a high mechanical strength of 24.9 MPa, strong thermal stability at 170 °C with no shrinkage, high porosity (84.3 %), and electrolyte uptake (661.4 %). It also exhibited exceptional ionic conductivity (2.75 mS/cm) and a notable lithium-ion transference number (tLi+ = 0.717). In coin batteries, the PVA/AMPS-LMA separator retained over 96 % capacity (142.4 mAh/g) after 200 cycles at 1C. This performance exceeded that of PVA/AMPS, PVA, and Celgard separators, suggesting that PVA/AMPS-LMA separators have the potential to replace their commercial counterparts.

Enhanced performance of solid polymer electrolytes combining poly(vinylidene fluoride-co-hexafluoropropylene), metal-organic framework and ionic liquid for advanced solid state lithium-ion batteries

The search for sustainable and high-performance materials for lithium-ion batteries is leading to significant advances in solid polymer electrolyte (SPE) technology. However, the current drawbacks of this approach prove the need for further research and development in the field. Herein, novel ternary solid polymer electrolytes have been developed using varying loads of MOF-808 metal-organic framework and [BMIM][SCN] ionic liquid (IL) incorporated in a poly(vinylidene fluoride-co-hexafluoropropylene) matrix. The solid polymer electrolytes were evaluated at morphological, structural, thermal, mechanical and electrochemical levels, and their performance in cycling battery testing was assessed. The results showed a homogeneous structure throughout all the samples and a good dispersion of the distinct components. The polymer polar phase and degree of crystallinity of the samples are increased with increasing IL content, and the thermal and mechanical properties are appropriate for battery application. The ionic conductivity of the samples reaches maximum values of 4.68 × 10−5 S‧cm−1 at room temperature, lithium transference numbers up to 0.65, and high electrochemical stability, making them well-suited for battery applications. The assembled stability after 50 cycles at C/10 with a discharge capacity value of 150 mAh‧g−1 at room temperature was tested/derived. The obtained results show the potential of this system for high performance room temperature solid polymer electrolytes.

Composite solid electrolyte with improved ionic conductivity and high lithium transference number through reduced PVDF-HFP crystallinity

Solid-state electrolytes (SSEs) with excellent stability and flexibility have been used to overcome the safety and stability issues associated with the liquid electrolyte used in lithium-ion batteries (LIBs). In this study, thin composite solid electrolytes (CSEs) based on poly(vinylidenefluoride-cohexafluoropropylene) (PVDF-HFP) with high mechanical strength were fabricated. Garnet-type Li6.5Ga0.2La2.95Rb0.05Zr2O12 (Ga-Rb LLZO) with high ionic conductivity was added to investigate the improvements in mechanical strength and ionic conductivity. The CSEs with Ga-Rb LLZO added to PVDF-HFP were referred to as PVDF-HFP + LLZO (PHL). Next, the interfacial resistance of the CSEs was reduced by adding a low-molecular-weight poly(ethylene glycol) (PEG) polymer, and the improvement in ionic conductivity and Li transfer was investigated. The CSEs with Ga-Rb LLZO and PEG added to the PVDF-HFP were referred to as PVDF-HFP + LLZO + PEG (PHLP). The ionic conductivity of the fabricated CSEs was 6.58 × 10−10 S cm−1 for the PVDF-HFP sheet, which increased to 1.10 × 10−5 S cm−1 and 2.33 × 10−4 S cm−1 for PHL and PHLP, respectively, at 70 °C. PHLP also had a very high lithium transference number of 0.789, and exhibited a discharge capacity of 123.16 mAh g−1 and a capacity retention rate of 88.29% after 200 cycles at 0.33C and 70 °C.

Polymer solid electrolytes with ultra-stable cycles and high-capacity retention for all-solid-state Li-metal battery

Polymer electrolytes have become widely popular on account of their low expenses, reduced weight, simple processing, and excellent safety features. However, polymer electrolytes have yet to find use in commercial batteries because of their limited mechanical durability and poor ionic conductivity. In this paper, an ultra-stable cycles and interfaces blending polymer electrolyte (BPE) suitable for all solid-state Li metal batteries was prepared by blending three polymers: polymethyl methacrylate (PMMA), polyvinylidene fluoride hexafluoropropylene (PVDF-HFP), and polyethylene oxide (PEO). Microstructure characterization showed numerous amorphous areas with strong interfacial strength of the BPE. The BPE3 exhibited a maximum of 15.65 MPa in tensile strength. BPE2 have excellent electrochemical performance, such as wide electrochemical windows (up to 4.7 V vs Li/Li+), high lithium ion transference numbers (up to 0.75), high ion conductivity (up to 1.87 × 10-4 S cm−1 at 60 °C), and excellent interface stability. By assembling all state-solid LiFePO4/BPE2/Li batteries for electrochemical testing, BPE2 exhibit high electrochemical characteristics. BPE2 discharge specific capacity is as high as 154.7 mAh g−1 at 1C. The BPE2 underwent 200 cycles at 0.5C and 400 cycles at 1C, with capacity retention rates of 95.7 % and 96.6 %, respectively. BPE is a promising electrolyte candidate for flexible lithium metal batteries.

A general strategy for all-solid-state batteries with agglomeration-free and high conductivity achieved by improving the interface compatibility of fillers and polymer matrix

Composite solid electrolytes (CSEs) composed of polymer matrix and inorganic fillers show considerable potential for applications in all-solid-state lithium (Li) metal batteries. However, challenges such as fillers agglomeration and low lithium ion transference number (tLi+) remain significant obstacles to the practical application of CSEs. Herein, a general strategy of graft polymerization on the fillers surface to modulate the interface compatibility with the polymer matrix is proposed, and CSEs are prepared to verify the feasibility. The microstructure and composition of the surface coating of the fillers are analyzed, with subsequent studies of the fillers distribution within the CSEs confirming the improved interface compatibility. The enhancement of interface compatibility facilitates uniform dispersion of fillers, thereby greatly improving the utilization of fillers. CSEs exhibits high ionic conductivity (0.163 mS·cm−1 at 30 °C) and tLi+ (0.77), which gives the battery excellent rate performance and cycle stability. Therefore, chemical grafting of polymer onto the fillers surface to enhance the interface compatibility with the polymer matrix represents a promising strategy for the practical application of solid-state batteries.

A novel composite solid electrolyte based on chemical bonding and physical reinforcing for all-solid-state lithium metal batteries

Sulfide electrolytes are a highly promising type of electrolyte due to their intrinsically soft properties and ultrahigh ionic conductivity. However, compatibility issues at the lithium interface have hindered their development in all-solid-state lithium metal batteries. Composite polymer electrolytes can indeed address interface issues, enhancing battery safety. Nonetheless, the incompatibility at the inorganic-organic interface within composite electrolytes can lead to reduced conductivity and diminished mechanical performance. Herein, we demonstrate a composite polymer electrolyte (CPE) composed of the Li6PS5Cl and polyethylene oxide (PEO) by the chemical bridging effect of (3-chloropropyl) trimethoxysilane (CTMS) on the 3D PET nonwoven framework to resolving the incompatibility between the inorganic and organic components, thereby reinforcing the chemical and mechanical performance of the electrolyte. The CPE shows superior characteristics, including elevated ionic conductivity (7.5 × 10−4 S cm−1), an extended electrochemical stability window (5.3 V versus Li/Li+), an expanded lithium transference number (t(Li+) = 0.52), and higher mechanical strength (9.35 MPa). The assembly of a Li/Li symmetric cell, operating steadily for 400 h at a current density of 0.3 mA cm−2 while maintaining a stable and relatively low polarization voltage (70 mV), demonstrates exceptional stability with respect to the lithium electrode. Moreover, the LiFePO4/Li cell initially exhibits a discharge-specific capacity of 163.6 mAh g−1 with a coulombic efficiency approaching 100 % after 100 cycles at 0.1C. This endeavor offers a robust, attainable, and scalable methodology for crafting composite electrolytes, thereby paving the path for the practical implementation of all-solid-state lithium metal batteries.

Multifunctional Additive Enables a "5H" PEO Solid Electrolyte for High-Performance Lithium Metal Batteries.

The solid-state battery with a lithium metal anode is a promising candidate for next-generation batteries with improved energy density and safety. However, the current polymer electrolytes still cannot fulfill the demands of solid-state batteries. In this work, we propose a "5H" poly(ethylene oxide) (PEO) electrolyte via introducing a multifunctional additive of tris(pentafluorophenyl)borane (TPFPB) for high-performance lithium metal batteries. The addition of TPFPB improves the ionic conductivity from 6.08 × 10-5 to 1.54 × 10-4 S cm-1 via reducing the crystallinity of the PEO electrolyte and enhances the lithium-ion transference number from 0.19 to 0.53 via anion trapping due to its Lewis acid nature. Furthermore, the fluorine and boron segments from TPFPB can optimize the composition of the solid-electrolyte interphase and cathode-electrolyte interphase, providing a high electrochemical stability window over 4.6 V of the PEO electrolyte along with significantly improved interface stability. At last, TPFPB can ensure improved safety through a self-extinguishing effect. As a result, the "5H" electrolyte enables the Li/Li symmetric cells to achieve a stable cycle over 2200 h at the current density of 0.2 mA cm-2 with a capacity of 0.2 mA h cm-2; the LiFePO4/Li full cells with a high LFP loading of 8 mg cm-2 exhibits decay-free capacity of 140 mA h g-1 (99% capacity retention) after 100 cycles; and the NCM811/Li cells exhibit a high capacity of 160 mA h g-1 after 50 cycles at 0.5 C. This work presents an innovative approach to utilizing a "5H" electrolyte for high-performance solid-state lithium batteries.

Covalent Organic Framework Enhanced Solid Polymer Electrolyte for Lithium Metal Batteries.

High ionic conductivity, outstanding mechanical stability, and a wide electrochemical window are the keys to the application of solid-state lithium metal batteries (LMBs). Due to their regular channels for ion transport and tailored functional groups, covalent organic frameworks (COFs) have been applied to solid electrolytes to improve their performance. Herein, we report a flexible polyethylene oxide-COF-LZU1 (abbreviated as PEO-COF) electrolyte membrane with a high lithium ion transference number and satisfactory mechanical strength, allowing for dendrite-free and long-time cycling for LMBs. Benefiting from the interaction between bis(triflfluoromethanesulonyl)imide anions (TFSI-) and aldehyde groups in COF-LZU1, the Li+ transference number of the PEO-5% COF-LZU1 electrolyte reached up to 0.43, much higher than that of neat PEO electrolyte (0.18). Orderly channels are conducive to the homogenous Li-+ deposition, thereby inhibiting the lithium dendrites. The assembled LiFePO4|PEO-5% COF-LZU1/Li cells delivered a discharge specific capacity of 146 mAh g-1 and displayed a capacity retention of 80% after 200 cycles at 0.1 C (60 °C). The Li/Li symmetrical cells of the PEO-5% COF-LZU1 electrolyte presented a longer working stability at different current densities compared to that of the PEO electrolyte. Therefore, the enhanced comprehensive performance of the solid electrolyte shows potential application prospects for use in LMBs.

The interface modification with polyethyleneimine enhances both ionic conductivity and interfacial compatibility of composite solid electrolyte

The composite solid electrolyte (CSE), polyethylene oxide (PEO)-Li6.4La3Zr1.4Ta0.6O12 (LLZTO), is deemed a promising candidate for all-solid-state batteries. Nevertheless, due to the poor interfacial compatibility between LLZTO nanoparticles and PEO, achieving a homogeneous dispersion of LLZTO nanoparticles within PEO is not readily attainable. The aggregation of LLZTO within PEO leads to a decline in the ionic conductivity of the CSE and poor interface stability with the electrode, ultimately resulting in deteriorated battery cyclic performance. In this work, the interface between LLZTO and PEO is designed and comprehensively investigated. Initially, dopamine self-polymerization is employed to form a uniform coating layer on the surface of LLZTO nanoparticles. Subsequently, by utilizing the amino groups present in polyethyleneimine (PEI), which can react with the phenolic hydroxyl groups of dopamine and the ether linkages in PEO, PEI serves as a bridging agent, enhancing the interfacial compatibility between LLZTO and PEO. Here it is shown that, the ionic conductivity of the LLZTO-PEO CSE containing 40 wt% modified LLZTO increases from 6.14✕10−5 S cm−1 to 1.89✕10−4 S cm−1. Furthermore, this CSE exhibits improved thermal stability, an enlarged electrochemical window of 4.8 V, a lithium-ion transference number of 0.45, and excellent interface stability with the lithium anode. The assembled LiFePO4 | 40 wt% LLZTO@PDA@PEI-PEO CSE | Li all-solid-state battery demonstrates an initial discharge specific capacity of 151.8 mA h g−1 at 0.2 C, with a capacity retention of 85.8% after 200 cycles. This work provides a novel strategy for interface-modified polymer- inorganic composite solid electrolytes, which will advance the development of high-energy-density all-solid-state lithium batteries.

SiO2-Decorated-Montmorillonite reinforced Poly(1,3-dioxolane) as a multifunctional solid electrolyte for High-Performance lithium batteries

Solid polymer electrolytes (SPEs) have garnered considerable attention owing to their remarkable flexibility, manufacturability, and cost-effectiveness. However, SPEs are hampered by critical limitations such as inadequate ionic conductivity at room temperature and issues related to lithium-ion migration, which curtail their practical applications. To tackle these challenges, the incorporation of inorganic additives into SPEs is considered as an effective strategy. Montmorillonite (MMT), a typical two-dimensional material, has emerged as an advanced filler for SPEs, displaying increased ionic conductivity, lithium-ion transference, and electrochemical stability. Herein, siliconized-modified montmorillonite (SiO2-MMT) nanosheets are synthesized and incorporated into poly(1,3-dioxolane) (PDOL)-based SPEs, resulting in a multifunctional composite solid electrolyte (CSE). The CSE shows an ionic conductivity as high as 5.58 × 10−4 S cm−1 at 30 °C, with a lithium-ion transference number close to 0.58. Symmetrical Li||Li cells utilizing the CSE exhibits stable performance for over 1200 h at a current density of 0.2 mA cm−2. Additionally, the CSE contributes to the stability of electrolytes, facilitates superior Li+ mobility and uniform deposition, thereby forming a stable solid electrolyte interface (SEI). Density functional theory (DFT) simulation confirms that SiO2-MMT, containing a large number of adsorption sites, facilitated fast reaction kinetics and effective anchoring of lithium polysulfides (LiPSs). As a result, the composite electrolyte is cycled in Lithium-sulfur (Li-S) batteries at 200 mA g−1 and 30 °C for 250 cycles, achieving a high coulombic efficiency (CE > 99.4 %) and a capacity decay rate of 0.15 %. Additionally, when paired with high-voltage Li(Ni0.8Co0.1Mn0.1)O2 (NCM811) cathodes and LiFePO4 (LFP) cathodes, both display excellent electrochemical performance. This research presents a highly promising approach for constructing multifunctional solid electrolytes for high-performance lithium batteries.

Constructing Enhanced Composite Solid-State Electrolytes with Sb/Nb Co-Doped LLZO and PVDF-HFP

Composite solid-state electrolytes are viewed as promising materials for solid-state lithium-ion batteries due to their combined advantages of inorganic solid-state electrolytes and solid-state polymer electrolytes. In this study, the solid electrolytes Li6.7−xLa3Zr1.7−xSb0.3NbxO12 (LLZSNO) with Sb and Nb co-doping were prepared by a high-temperature solid-phase method. Results indicate that Sb/Nb co-doping causes lattice deformation in LLZO and increases the lithium vacancy concentration and conductivity of LLZO. Then, with the co-doped LLZSNO as an inorganic filler, a composite solid electrolyte of polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP) was prepared with a casting method. The obtained composite solid electrolyte exhibits a high ionic conductivity of 1.76 × 10−4 S/cm at room temperature, a wide electrochemical stable window of 5.2 V, and a lithium-ion transfer number of 0.32. The Li|LiFePO4 coin battery with the composite solid electrolyte shows a high specific capacity of 161.2 mAh/g and a Coulombic efficiency close to 100% at 1 C. In addition, the symmetrical lithium battery Li|Li with the composite electrolyte could cycle stably for about 1500 h without failure at room temperature.

Ion-Exchange-Induced Phase Transition Enables an Intrinsically Air Stable Hydrogarnet Electrolyte for Solid-State Lithium Batteries.

Inferior air stability is a primary barrier for large-scale applications of garnet electrolytes in energy storage systems. Herein, a deeply hydrated hydrogarnet electrolyte generated by a simple ion-exchange-induced phase transition from conventional garnet, realizing a record-long air stability of more than two years when exposed to ambient air is proposed. Benefited from the elimination of air-sensitive lithium ions at 96h/48e sites and unobstructed lithium conduction path along tetragonal sites (12a) and vacancies (12b), the hydrogarnet electrolyte exhibits intrinsic air stability and comparable ion conductivity to that of traditional garnet. Moreover, the unique properties of hydrogarnet pave the way for a brand-new aqueous route to prepare lithium metal stable composite electrolyte on a large-scale, with high ionic conductivity (8.04×10-4Scm-1), wide electrochemical windows (4.95V), and a high lithium transference number (0.43). When applied in solid-state lithium batteries (SSLBs), the batteries present impressive capacity and cycle life (164mAhg-1 with capacity retention of 89.6% after 180 cycles at 1.0C under 50°C). This work not only designs a new sort of hydrogarnet electrolyte, which is stable to both air and lithium metal but also provides an eco-friendly and large-scale fabrication route for SSLBs.

Manipulating the ionic conductivity and interfacial compatibility of polymer-in-dual-salt electrolytes enables extended-temperature quasi-solid metal batteries

Solid polymer electrolytes (SPEs) have shown great promise in the development of lithium-metal batteries (LMBs), but SPEs’ interfacial instability and limited ionic conductivity still prevent their widespread applications. Herein, high-concentration hybrid dual-salt “polymer-in-salt” electrolytes (HDPEs) through formulation optimization were facilely prepared to simultaneously boost ionic conductivity, improve interfacial compatibility, and ensure a wide-temperature-range operation with high safety. An optimized electrolyte (HDPE-0.6) shows negligible corrosion to the aluminum current collector after manipulating the salt ratio of lithium bis(trifluoromethane)sulfonimide and lithium bis(oxalato)borate. In addition, HDPE-0.6 has excellent ionic conductivity (i.e., ∼0.536, ∼0.898, and ∼1.28 mS cm−1 at 0, 30, and 60 °C), approaching 1 mS cm−1 at room temperature. Furthermore, HDPE-0.6 exhibits a high lithium transference number of 0.6 and a high electrochemical oxidation stability potential of > 4.8 V vs. Li/Li+. Additionally, due to the formulation of high-concentration thermally stable lithium salts and the employment of flame-retardant trimethyl phosphate as the solvent, HDPE-0.6 has no safety issues. The resultant LiFePO4|HDPE-0.6|Li cell exhibits high discharge capacity, good rate capability, and excellent cycle stability at extended temperatures of 0, 30, and 60 °C. By coupling theoretical calculations and in-depth X-ray photoelectron spectroscopy, we attribute the excellent cycle stability to the formation of a stable interphase. Moreover, our formulation strategy is suitable for the Na3V2(PO4)3//Na battery when replacing the lithium salts with sodium salts (i.e., sodium bis(trifluoromethane)sulfonimide and sodium bis(oxalato)borate) to yield HDPE-0.6-Na, as demonstrated by excellent cycle stability (e.g., 98.6 % of capacity retention after 300 cycles). Our work demonstrates that the as-developed quasi-solid HDPEs are suitable for LMBs and sodium-metal batteries, and HDPEs can function normally in a wide temperature range.

Li6.28La3Zr2Al0.24O12-reinforced Single-ion Conducting Composite Polymer Electrolyte for Room-Temperature Li-Metal Batteries

Composite polymer electrolytes composed of inorganic fillers and organic polymers are promising electrolyte candidates for Li metal batteries, with benefits of improved safety and suppressed lithium dendrite growth. However, a severe concentration polarization effect often occurs when using conventional dual-ion electrolytes, and the increase in internal impedance during cycling results in decreased lifespan of the battery. To address this challenge, a plasticized single-ion conducting composite polymer electrolyte (SICE) was designed and fabricated by polymerizing the monomers of lithium (4-styrenesulfonyl) (trifluoromethanesulfonyl) imide (LiSTFSI) and poly(ethylene glycol) methyl ether acrylate (PEGMEA), crosslinker poly(ethylene glycol) diacrylate (PEGDA), silane-modified Li6.28La3Al0.24Zr2O12 nanofibers (s@LLAZO NFs), along with a PEG-based plasticizer tetraethylene glycol dimethyl ether (TEGDME), by heat-initiation. The anions were restrained and delocalized so that only Li cation migration occurred during the charging/discharging process, leading to a superior lithium-ion transference number. The s@LLAZO NFs enabled direct monomer grafting with the polymer matrix, resulting in controlled formation of an organic-inorganic network with increased filler content and improved filler distribution in the SICE system. The SICE membrane exhibited high ionic conductivity at room temperature, reduced activation energy and excellent oxidation stability. Most importantly, the all-solid-state Li-metal batteries assembled with the fabricated SICE demonstrated stable long-term cycling performance and remarkable rate capability at room temperature.

Ce doped UiO-66(Hf) electrolyte for all-solid-state lithium metal batteries

Solid electrolytes have garnered significant attention as promising candidates for all-solid-state batteries due to their excellent safety, and cycling stability. However, the development of solid electrolytes faces challenges in achieving high ionic conductivity and low interfacial impedance. In this study, we prepared a Ce doped UiO-66(Hf)-base electrolyte using a solvothermal method. The resulting electrolyte exhibited remarkable properties, including high Li-ion conductivity (3.72 × 10−3 S cm−1), a high lithium ion transfer number (tLi+ = 0.66), and stability during stripping electroplating. These impressive results can be attributed to that the shorter length of the Ce-O bond in UiO-66(Hf) compared to the Hf-O bond, which enhances the transformation of Li+ ions. The incorporation of Ce as a dopant into UiO-66(Hf) in solid electrolytes holds great promise for future applications in solid-state batteries.

Enhancement mechanism of the comprehensive performance of all-solid-state polymer electrolytes by halloysite nanotubes: Construction of efficient lithium-ion conduction channels

Considering the current issues with poly(ethylene oxide)-based all-solid-state polymer electrolytes (PEO-ASSPEs) employed in lithium-ion batteries (LIBs), such as low ionic conductivity, low lithium-ion transference number, narrow electrochemical stability window, and poor cyclic stability. This study introduces oxygen-vacancy-rich halloysite nanotubes (HNTs) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) into the PEO matrix to fabricate a flexible composite polymer electrolyte (CPEs) via a solvent-free method. The interaction between HNTs and LiTFSI in the PEO matrix serves to mitigate the ionic solvation effect, increase the number of free lithium-ion, and reduce the lithium-ion migration energy barrier. Additionally, the internal framework formed by the mutual stacking of HNTs reduces the number of entanglements in polymer molecular chains, enhances the mobility of the chains, and generates a continuous interface effect, forming fast lithium-ion transport channels. The CPEs prepared in this study are in conformity with the Vogel-Tammann-Fulcher (VTF) empirical equation. The CPE containing 10 wt% HNTs exhibits a high ionic conductivity (7.15 × 10−4 S cm−1) at 25 °C, a high lithium-ion transference number (0.600), a wide electrochemical stability window (5.5 V), and excellent cyclic performance (capacity retention of 82.02 % after 100 cycles at 0.1C), satisfying the electrochemical performance requirements for ASSPEs in LIBs.

Rationally coordinating polymer enabling effective Li-ion percolation network in composite electrolyte for solid-state Li-metal batteries

The sluggish lithium-ion mobility and inferior electrolyte/electrode interfacial compatibility of composite solid electrolytes greatly hinder the practical application of solid-state lithium-metal batteries. Here, a novel composite polymer electrolyte (CPE) with effective Li+ percolation network is synthesized based on single-ion conductive polymer lithiated polyvinyl formal (LiPVFM) and garnet Li6.4La3Zr2Ga0.2O12 (LLZGO) nanoparticles. The supramolecular interaction between the branched hydroxyl in LiPVFM and the lattice oxygen in LLZGO fillers endows CPE with a continuous percolation structure and improved toughness. Meanwhile, the rational O-Li+ coordination in the LiPVFM random polymer significantly enhances Li+ transfer within the percolation network. Therefore, this as-prepared CPE presents a lithium-ion transference number of 0.75 and an ionic conductivity of 0.527 mS cm−1 at 30 °C, alongside an electrochemical stability window of 4.6 V and a substantial suppression of Li dendrite growth. In addition, ultra-stable interfaces between this CPE and high-voltage LiNi0.6Mn0.2Co0.2O2 (NMC) cathode during cycling can be determined by in-situ electrochemical impedance spectroscopy and in-situ differential electrochemical mass spectrometry characterization. This work is a new exploration for the structural design of CPEs and highlights the importance of “rational coordination” of alkali cation in solid batteries.

3D cross-linked POSS-containing borate single ion conductor organic-inorganic hybrid gel electrolytes for dendrite-free lithium metal batteries

At present, lithium (Li) metal has become the most promising anode for the next generation of batteries due to its excellent theoretical capacity and low electrochemical potential. Nevertheless, low lithium-ion transference numbers and poor stability between conventional electrolytes and electrodes limit its development. In this work, a novel three-dimensional cross-linked hybrid borate single ion conductor polymer electrolyte (POSS-BSICP) was constructed by coupling of novel synthesized lithium bis-allylmalonate borate (LiBAMB), poly (ethylene glycol) diacrylate (PEGDA) and vinyl-containing caged poly(sesquisiloxane) (MAPOSS) in the presence of pentaerythritol tetrakis(mercaptoacetate) (PETMP) as cross-linker and PVDF-HFP as support materials through UV-thermal Dual-Curing procedures. As expected, the lithium-ion transference number and electrochemical stability of the hybrid electrolyte membranes improve with the incorporation of MAPOSS. The tLi+ is up to 0.82 and the electrochemical window reaches 5.50 V. The Li/Li cell assembled with the POSS-containing single ion conductor gel polymer electrolytes can be subjected to stripping/plating cycles without short circuit over 2700 h at 0.1 mA cm−2, the peak of the SiO bond at 102.3 eV in the Si 2p spectrum confirms that the POSS participate in the formation of SEI, indicating that the incorporation of MAPOSS could increase the compatibility between the electrolytes and electrode. The Li|POSS-BSICP|LiFePO4 cell exhibits excellent cycle performance with a capacity retention over 90 % after 170 cycles and 82.0 % after 290 cycles at 0.1 C.