Liquid Crystal Monomers Research Articles

Characteristic structures of liquid crystal monomers in EI-MS analysis and the potential application in suspect screening

Liquid crystal monomers (LCMs) are of emerging concern due to their ubiquitous presence in indoor and outdoor environments and their potential negative impacts on human health and ecosystems. Suspect screening approaches have been developed to monitor thousands of LCMs that could enter the environment, but an updated suspect list of LCMs is difficult to maintain given the rapid development of material innovations. To facilitate suspect screening for LCMs, in-silico mass fragmentation model and quantitative structure-activity relationship (QSPR) models were applied to predict electron ionization (EI) mass spectra of LCMs. The in-silico model showed limited predictive power for EI mass spectra, while the QSPR models trained with 437 published mass spectra of LCMs achieved an acceptable absolute error of 12 percentage points in predicting the relative intensity of the molecular ion, but failed to predict the mass-to-charge ratio of the base peak. A total of 41 characteristic structures were identified from an updated suspect list of 1606 LCMs. Multi-phenyl groups form the rigid cores of 85% of LCMs and produce 154 characteristic peaks in EI mass spectra. Monitoring the characteristic structures and fragments of LCMs may help identify new LCMs with the same rigid cores as those in the suspect list.

Photochemical behaviour and toxicity evolution of phenylbenzoate liquid crystal monomers in water

Liquid crystal monomers (LCMs) are a group of emerging pollutants that pose potential environmental risks because of their ubiquitous occurrence and toxicity. Understanding their environmental transformation is essential for assessing the ecological risk. In this study, we investigated the photochemical transformation kinetics, mechanism, and photo-induced toxicity of three phenylbenzoate LCMs in water. Their apparent photolytic rate constants were within (0.023 – 0.058) min-1, and the half-lives were < 30.0 min, showing lower persistence in water. Dissolved organic matter significantly inhibited their photolysis because of light-shielding effect and quenching of excited triplet states of LCMs. Their photolysis mainly occurred through excited triplet states, and the reactive oxygen species (i.e., ⋅OH, 1O2 and ⋅O2-) contributed to their degradation. The main photolysis pathways were ester bond cleavage, ⋅OH substitution/addition, and defluorination. Experiments and computational simulation revealed that some ·OH addition/substitution products have similar toxicity with LCMs. Additionally, the ∙OH reaction rate constants (kOH) of LCMs were determined to be > 1 × 109 M-1 s-1, evidence for their high reactivity toward ⋅OH. We have further developed reliable methods to estimate kOH of other phenylbenzoate-like LCMs with quantum chemical calculations. These results are useful for understanding the transformation and fate of LCMs in aquatic environments.

Analysis of 78 trace liquid crystal monomers in air by gas chromatography coupled with triple quadrupole mass spectrometry

Liquid crystal monomers (LCMs) comprise a class of organic pollutants that have garnered considerable attention because of their dioxin-like toxicity (i.e., modulation of genes) and presence in various environments. However, limited information about the identities, occurrence, and distribution of LCMs has highlighted an urgent need for a high-throughput and sensitive analytical method. In this study, we developed and validated a rapid, simple, sensitive method that involves minimal solvent consumption. The method was applied for the simultaneous detection and identification of 78 LCMs in atmospheric total suspended particulate samples (dae < 100 μm) using gas chromatography coupled with triple quadrupole mass spectrometry. The results showed high degrees of linearity with correlation coefficients >0.995 in the concentration range of 5.0–500 ng/mL. The instrumental detection limits ranged from 0.7 to 5.3 pg, and the method detection limits ranged from 0.1 to 0.9 pg/m3. The accuracy of the method was between 70 % and 130 % for most analytes, and the relative standard deviations of six replicates were <15 % at three levels of spiking (10, 50, and 200 ng/mL). The developed analytical method was applied to analyze real air particulate samples from Beijing, China. Overall, 45 LCMs ranged from 65.5 to 145.7 pg/m3, with a mean concentration of 92.5 pg/m3. Among them, (trans,trans)-4-propyl-4′-ethenyl-1,1′-bicyclohexane (PVB) was the most abundant, with an average concentration of 33.6 pg/m3. The total estimated daily intakes of LCMs for adults and children were 15.6 and 46.6 pg/kg bw/day, respectively. Accordingly, the method described herein is suitable for quantifying LCMs in atmospheric particulate samples. This study will be valuable for investigating LCM environmental occurrence, behaviors, and risk assessments.

Liquid crystal monomers (LCMs) in indoor residential dust from Beijing, China: occurrence and human exposure.

Liquid crystal monomers (LCMs) are widely used in electronic devices and emerging as an environmental pollutant, while their occurrence in indoor environments is still less studied. In this study, 32 out of 37 target LCMs were detected in indoor residential dust samples (n = 112) from Beijing, China. Concentrations of Σ32LCMs ranged from 17.8 to 197ng/g, with a median value of 54.7ng/g. Fluorinated biphenyls and analogs (FBAs) and cyanobiphenyls and analogs (CBAs), with median concentrations of 22.8 and 15.9ng/g, respectively, were the main kinds of LCMs. Although 32 LCMs can be detected, four monomers with the highest contamination levels contributed to almost 70% of the total LCMs. Spearman correlation analysis found significant correlations among some monomers, which indicated that they might share similar sources in the residential environment. Estimated daily intakes (EDIs) of LCMs via indoor dust for Beijing residents were calculated, and the results showed that dust ingestion and dermal contact were both main intake pathways to LCMs, and younger people may face higher exposure to LCMs. A comparison to the results of China's total diet study showed that EDIs of LCMs via food consumption might be higher than that via dust intake, while health risks caused by exposure of LCMs for the general population, both through food and dust, were insignificant at present.

A flexible optically driven liquid crystal display based on RM257 doping

With advances in technology, requirements for the performance of liquid crystal displays (LCDs) are gradually increasing, especially for flexible displays, which involve many new challenges. Here, we propose a new method for implementing optically driven LCD flexible displays. Upon doping an E7 nematic liquid crystal (LC) with RM257 liquid crystal monomer and polymerizing it using ultraviolet light, a polymer network forms as the spacer between the two substrates of the LC, maintaining the surrounding E7 LC in a relatively stable state and improving the mechanical properties of the LC. This also endows the LC mixture with a limited capacity for deformation recovery and enables uniform deformation under stress, thereby achieving flexible displays. Applying an electric field to the two ends of the LC cell, the viscosity coefficient of the LC molecules is improved and the rewriting time can be optimized. This type of LC cell can be programmed through light control, achieving low power consumption for a wearable display device.

Aquatic photolysis of high-risk fluorinated liquid crystal monomers: Kinetics, toxicity evaluation, and mechanisms

Despite the frequent detection of fluorinated liquid-crystal monomers (FLCMs) in the environment, the level of understanding of their fate, toxicity, and transformation remains insufficient. Herein, we investigated the degradation kinetics and mechanism of an FLCM (4-cyano-3-fluorophenyl 4-ethylbenzoate, CEB-F) under ultraviolet (UV) photolysis in aquatic environment. Our findings demonstrated that the UV photolysis of CEB-F followed first-order kinetics. Photodegradation products were identified using liquid chromatography with mass spectrometry, and detailed reaction pathways were proposed. It is postulated that through the attack of reactive oxygen species, hydroxylation, and CO/C-F bond cleavage, CEB-F gradually degraded into small molecular compounds, releasing fluorine ions. Acute immobilization tests with Daphnia magna (D. magna) revealed significant acute toxicity of CEB-F, with LC50 values ranging from 1.023 to 0.0536 μM over 24 to 96 h, emphasizing the potential high risk of FLCMs in aquatic ecosystems if inadvertently discharged. Interestingly, we found that the toxicity of CEB-F photolysis reaction solutions was effectively reduced. Through catalase and acetylcholinesterase activities analysis along with molecular docking simulation, we proposed differences in the underlying toxicity mechanisms of CEB-F and its photolysis products to D. magna. These findings highlight the potential harmful effects of FLCMs on aquatic ecosystems and enrich our understanding of the photolysis behavior of FLCMs.

Chiral fluorescent liquid crystal polymers containing 4-bromo-1,8-naphthalimide – synthesis and properties

ABSTRACT By introducing two cholesteric liquid crystal monomers with different chain lengths (M1 and M2) and brominated naphthalimide fluorescent monomer (M3) into polymethyl hydrosiloxane, a series of fluorescent cholesteric liquid crystal polymers (FL-LCP) was prepared, which not only have excellent performance of liquid crystal and fluorescence but also own performance of selective reflection. Their chemical structures were confirmed to be in accord with molecular design by FT-IR and 1 H NMR spectroscopy, and found them with excellent thermal stability, mesomorphic behaviour and thermal performance by TGA, POM, DSC and XRD, and confirmed all the polymers belonged to the cholesteric phase. The FL-CLCPs emitted different intensity fluorescence under UV light, and conclusions about the relationship between fluorescence and temperature had been drawn. A comparative study was conducted on the fluorescence properties of powders and films of monomers and polymers.

Comprehensive Characterization of Organic Light-Emitting Materials in Breast Milk by Target and Suspect Screening.

Organic light-emitting materials (OLEMs) are emerging contaminants in the environment and have been detected in various environment samples. However, limited information is available regarding their contamination within the human body. Here, we developed a novel QuEChERS (quick, easy, cheap, effective, rugged, and safe) method coupled with triple quadrupole/high-resolution mass spectrometry to determine OLEMs in breast milk samples, employing both target and suspect screening strategies. Our analysis uncovered the presence of seven out of the 39 targeted OLEMs in breast milk samples, comprising five liquid crystal monomers and two OLEMs commonly used in organic light-emitting diode displays. The cumulative concentrations of the seven OLEMs in each breast milk sample ranged from ND to 1.67 × 103 ng/g lipid weight, with a mean and median concentration of 78.76 and 0.71 ng/g lipid weight, respectively, which were higher compared to that of typical organic pollutants such as polychlorinated biphenyls and polybrominated diphenyl ethers. We calculated the estimated daily intake (EDI) rates of OLEMs for infants aged 0-12 months, and the mean EDI rates during lactation were estimated to range from 30.37 to 54.89 ng/kg bw/day. Employing a suspect screening approach, we additionally identified 66 potential OLEMs, and two of them, cholesteryl hydrogen phthalate and cholesteryl benzoate, were further confirmed using pure reference standards. These two substances belong to cholesteric liquid crystal materials and raise concerns about potential endocrine-disrupting effects, as indicated by in silico predictive models. Overall, our present study established a robust method for the identification of OLEMs in breast milk samples, shedding light on their presence in the human body. These findings indicate human exposure to OLEMs that should be further investigated, including their health risks.

Fabrication of liquid crystal Fe3O4 composites and their magnetorheological properties

AbstractSome supramolecular polyacrylate‐based liquid crystal polymers (PLCPs) were prepared by polyacrylic acid, a liquid crystal monomer and 3,5‐pyridinedicarboxylic acid. Series of magnetic liquid crystal particles (Fe3O4@PLCPs) with core‐shell structure were prepared by modifying surface of magnetic nanoparticles Fe3O4 by the PLCPs. The Fe3O4@PLCPs showed a saturation magnetization strength above 51.17 emu/g, which is similar to pure magnetic Fe3O4, indicating good magnetism and magnetic field dependence. Series of magnetorheological fluids were fabricated by Fe3O4@PLCPs (using as dispersed phase) and silicone oil (using as carrier liquid). The effects of mesogen, magnetic particle, and the polymer matrix on magnetorheological performance and settling stability were investigated. The magnetorheological fluid based on 10% Fe3O4@PLCP‐1 showed the best performance at an applied magnetic field of 100 mT in this study. Furthermore, the magnetorheological fluids showed excellent settling stability because the density of Fe3O4@PLCPs was lower than that of Fe3O4. The Fe3O4@PLCPs‐based fluids presented certain application potential in the field of magnetic fluid due to the excellent magnetorheological effect and settling stability.

Accumulation characteristics of liquid crystal monomers in plants: A multidimensional analysis

Liquid crystal monomers (LCMs), identified as emerging contaminations, have been detected in soils and plants, but their accumulation characteristics in plants haven’t been studied. Therefore, this study systematically investigated the accumulation characteristics of LCMs in plants from four dimensions (i.e., plant fruit species, soil types, plant growth stages, and LCMs categories) for the first time. The LCMs concentrations (9.96 × 10−4 to 114.608 ng/g) in 22 plant fruits were predicted by the partition-limited model. Grains with the highest lipid content showed the highest LCMs accumulation propensity. Plants grown in paddy soil showed a strong LCMs accumulation capacity. Results showed that the LCMs accumulation capacity in plants from soils decreased when the soil organic matter content increased. A preferential accumulation of LCMs in plant root systems during growth was found by the molecular dynamics simulations. Compared to polychlorinated biphenyls (as the reference contaminants of LCMs), LCMs exhibit higher accumulation in plant roots and lower translocation to shoots. For the fourth dimension, lipophilicity was found to be the main reason of LCMs accumulation by intergraded stepwise linear regression with sensitivity analysis. This is the inaugural research concentrating on LCMs accumulation in plants, providing insights and theoretical guidance for future LCMs management strategies multidimensionally.

Electric-field-aligned liquid crystal polymer for doubling anisotropic thermal conductivity

High thermal conductive polymers have become more important because equipment requires high performance, high-energy density, and high integration. There are different strategies to make high thermal conductive polymers, among which is the synthesis of polymers in the liquid crystal phase. However, the thermal conductivity of such material is rarely beyond 1 W m−1 K−1 because of the disordered molecular directionality. The disordered directionality between crystal zones limits the thermal conductivity in a specific direction. Here, we show a method for unifying the direction of crystal zones by applying an external electric field on the liquid crystal monomers. Meanwhile, by exposing the transparent equipment and specially designed photopolymerisable monomer in UV light, the liquid crystal monomer is in situ polymerised into a liquid crystal polymer with a high intrinsic thermal conductivity of 1.02 W m−1 K−1. The molecular alignment was characterised and resulted in the resultant high conductivity.

Heterogeneous Photodegradation Behavior of Liquid Crystal Monomers in Dust: Quantitative Structure-Activity Relationship and Product Identification.

The heterogeneous photodegradation behavior of liquid crystal monomers (LCMs) in standard dust (standard reference material, SRM 2583) and environmental dust was investigated. The measured photodegradation ratios for 23 LCMs in SRM and environmental dust in 12 h were 11.1 ± 1.8 to 23.2 ± 1.1% and 8.7 ± 0.5 to 24.0 ± 2.8%, respectively. The degradation behavior of different LCM compounds varied depending on their structural properties. A quantitative structure-activity relationship model for predicting the degradation ratio of LCMs in SRM dust was established, which revealed that the molecular descriptors related to molecular polarizability, electronegativity, and molecular mass were closely associated with LCMs' photodegradation. The photodegradation products of the LCM compound 4'-propoxy-4-biphenylcarbonitrile (PBIPHCN) in dust, including •OH oxidation, C-O bond cleavage, and ring-opening products, were identified by nontarget analysis, and the corresponding degradation pathways were suggested. Some of the identified products, such as 4'-hydroxyethoxy-4-biphenylcarbonitrile, showed predicted toxicity (with an oral rat lethal dose of 50%) comparable to that of PBIPHCN. The half-lives of the studied LCMs in SRM dust were estimated at 32.2-82.5 h by fitting an exponential decay curve to the observed photodegradation data. The photodegradation mechanisms of LCMs in dust were revealed for the first time, enhancing the understanding of LCMs' environmental behavior and risks.

Preparation and properties of highly flexible cholesteric side-chain liquid crystalline elastomers with selective reflective properties in the visible region

ABSTRACT In this paper, we have synthesised cholesteryl 4-allyloxybenzoate (MB), crosslinking agent dodecane-1,12-diyl bis(undec-10-enoate) (MG), and A’BGF series liquid crystalline elastomer (LCE) films which take polymethylhydrosiloxane (A’) as the backbone, MB as the cholesteric liquid crystal (LC) monomer, and MG and bis-vinyl silicone oil (MF) with different reactivities as cross-linking agent for exploring the effect of the change of MF content on the properties of the elastomeric films. The experimental results show that the synthesised MB, MG, and the LCE films are all consistent with the molecular design; MB is an enantiotropic cholesteric LC. The synthesised LCE films are cholesteric LCs, have certain selective reflection characteristic, higher thermal stability, and their Tg decreased down to 3.9°C as MF increasing. During the heating and cooling, the liquid crystalline properties of the LCE films have a good reversibility. Among the synthesised LCE films, A’BGF-2 has stretching radio of 264.8% at room temperature, with the best elastic properties. By adjusting the ratio of MF, the content of small-molecule MB remained in the films can be changed, which will affect the optical properties and elasticity of the LCE films. The experiments provide a method for the preparation of highly elastic side chain LCE film.

Toxicity Assessment of Environmental Liquid Crystal Monomers: A Bacteriological Investigation on Escherichia coli and Staphylococcus epidermidis.

The widespread existence of liquid crystal monomers (LCMs) in various environmental matrices has been demonstrated, yet studies on the toxicological effects of LCMs are considerably scarce and are urgently needed to be conducted to assess the adverse impacts on ecology and human health. Here, we conducted a bacteriological study on two representative human commensal bacteria, Escherichia coli (E. coli) and Staphylococcus epidermidis (S. epidermidis), to investigate the effect of LCMs at human-relevant dosage and maximum environmental concentration on growth, metabolome, enzymatic activity, and mRNA expression. Microbial growth results exhibited that the highest inhibition ratio of LCMs on S. epidermidis reached 33.6% in our set concentration range, while the corresponding data on E. coli was only 14.3%. Additionally, LCMs showed more dose-dependent toxicity to S. epidermidis rather than E. coli. A novel in vivo solid-phase microextraction (SPME) fiber was applied to capture the in vivo metabolites of microorganisms. In vivo metabolomic analyses revealed that dysregulated fatty acid metabolism-related products of both bacteria accounted for >50% of the total number of differential substances, and the results also showed the species-specific and concentration-dependent metabolic dysregulation in LCM-exposed bacteria. The determination of enzymatic activity and mRNA relative expression levels related to oxidative stress confirmed our speculation that the adverse effects were related to the oxidative metabolism of fatty acids. This study complements the gaps in toxicity data for LCMs against bacteria and provides a new and important insight regarding metabolic dysregulation induced by environmental LCMs in human commensal bacteria.

Circularly Polarized Room Temperature Phosphorescence of Chiral Bromoxanthone Using a Chiral Self‐Assembled Liquid Crystal Polymer Frameworks

AbstractChiral self‐assembly has often been found to be an efficient strategy for the development of high‐performance circularly polarized luminescent (CPL) materials, through the regulation of the ordered helical superstructure blocks in liquid crystal media. Here, the design and synthesis of two pairs of axially chiral emitters (BBXT‐3‐Br and BOHXT‐3‐Br) are reported based on bromoxanthone. And the chiral self‐assembled liquid crystal polymer (LCP) framework (PRM257) is demonstrated by mixing of the emitters with liquid crystal monomer (RM257) through thermal annealing and photoinitiated polymerization. Both BBXT‐3‐Br@PRM257 and BOHXT‐3‐Br@PRM257 exhibited excellent room temperature phosphorescence (RTP) properties. In addition, BBXT‐3‐Br@PRM257 enantiomers showed afterglow with an average lifetime (τ) of 162.41 ms and emitted blue CPL (λem = 450 nm, ΦFL = 1.3%, |gFL| = 0.071), although weak circularly polarized RTP (CP‐RTP) is observed. Interestingly, BOHXT‐3‐Br@PRM257 with a less conjugated system emits red RTP (τ = 98.83 ms) and also intense CP‐RTP (λem = 612 nm, ΦPhos = 0.45%, |gRTP| = 0.057).

Influence of the length of end-group double bond substituents on the temperature change of phase transition in liquid crystals

ABSTRACT A series of nematic liquid crystal (LC) monomers, containing a reactive group in the lateral substituent, were designed and synthesised through an organic synthesis reaction. Considerable changes were made to the properties of the liquid monomers by varying the terminal alkyl chain lengths. The molecular structures of the intermediates and the LC monomers were characterised by flourier infrared absorption spectrometry and proton nuclear magnetic resonance (1H NMR) spectroscopy, leading to the identification of the target product. The phase transition temperatures of the LC monomers were observed and analysed using differential scanning calorimetry (DSC) and polarising optical microscopy (POM) with a hot stage. The two-way thermotropic liquid crystalline behaviour was observed during the heating process, providing insight into the effect of substituent changes on the phase transition temperature.

Understanding the importance of atmospheric transformation in assessing the hazards of liquid crystal monomers.

Liquid crystal monomers (LCMs), a group of synthetic chemicals released from liquid crystal devices such as televisions and smartphones, have recently been recognized as emerging contaminants due to their widespread occurrence in the environment and potential negative impacts on human health. Airborne LCMs can undergo atmospheric oxidation reactions to form various transformation products. Despite the certainty of atmospheric transformation chemistry, the knowledge about the hazard properties of transformation products remains largely unknown. Here, we perform an in silico model-based evaluation of the persistence, bioaccumulation potential, mobility, and toxicity of two representative LCMs, namely, 1-ethyl-4-(4-(4-propylcyclohexyl)phenyl)benzene and 4''-ethyl-2'-fluoro-4-propyl-1,1':4',1''-terphenyl, and their transformation products. We found that, among the investigated transformation products, 38% have overall persistence greater than the minimum of 331 days among the persistent organic pollutants regulated by the Stockholm Convention, 62% meet the bioaccumulation threshold of 1000 L kg-1 used by the United States Environmental Protection Agency, 44% are classified "mobile" according to the criterion used by the German Environmental Agency, and 58% have the potential to induce unacceptable toxic effects in aquatic organisms. Furthermore, we identified several transformation products with increased persistence, bioaccumulation potential, and mobility compared to their parent compounds. These findings not only offer insights for prioritizing LCM transformation products for future risk assessment, but also underscore the significance of considering atmospheric transformation in the evaluation of environmental risks posed by emerging contaminants, including LCMs.

A method for the determination of 60 liquid crystal monomers in biotic and abiotic samples

Liquid crystal monomers (LCMs) are synthetic organic chemicals widely used in the manufacture of liquid crystal displays (LCDs) of digital electronic devices. As human interactions with digital electronics such as computers and smartphones intensify, exposure to LCMs is a public health concern. Nevertheless, there is limited research on the occurrence of LCMs in biological and non-biological matrices. We developed a method to determine 60 LCMs in electronic-waste panels (i.e., computer monitors), indoor dust, feces, and urine using gas chromatography–mass spectrometry (GC–MS). Solid matrices (i.e., dust and feces) were extracted using a solid-liquid extraction (SLE) procedure whereas liquid matrices (i.e., urine) were extracted using solid phase extraction (SPE). Indoor dust and feces extracts were purified by passage through silica gel packed gravity columns. The method limits of detection (LODs) and quantification (LOQs) were in the ranges of 0.05–13.0 and 0.18–39.1 ng/mL, respectively. Recoveries of all target analytes fortified at concentrations of 10 and 100 ng/mL on LCD panels, dust, feces, and urine were in the range of 71–130%, with standard deviations of 0.01–33%. Repeated analyses of similarly fortified samples yielded intra-day and inter-day variations (CV) of 0.32–12.6% and 0.76–14.3%, respectively. Matrix effects, calculated from fortified matrices, ranged from −28.5% to 28.5%. The method was applied in the analysis of LCD panels, indoor dust, dog feces and urine, which were found to contain 22, 42, 46, and 18 of the 60 targeted LCMs, respectively. LCMs were found in LCD panels (∑LCM = 1780 ± 165 ng/cm2 for desktop computer monitors; and 166,900 ± 80,100 ng/cm2 for smartphone screens), indoor dust (∑LCM = 2030 ± 1260 ng/g), dog feces (∑LCM = 1990 ± 2000 ng/g dw), and urine (∑LCM = 24.0 ± 14.6 ng/mL). The developed method can be applied in the analysis of LCMs in a wide range of environmental and biological samples.

Evaluating the Environmental Persistence of Liquid Crystal Monomers Indoors and Outdoors

Evaluating the Environmental Persistence of Liquid Crystal Monomers Indoors and Outdoors

Aerobic Microbial Transformation of Fluorinated Liquid Crystal Monomer: New Pathways and Mechanism.

Fluorinated liquid crystal monomers (FLCMs) have been suggested as emerging contaminants, raising global concern due to their frequent occurrence, potential toxic effects, and endurance capacity in the environment. However, the environmental fate of the FLCMs remains unknown. To fill this knowledge gap, we investigated the aerobic microbial transformation mechanisms of an important FLCM, 4-[difluoro(3,4,5-trifluorophenoxy)methyl]-3, 5-difluoro-4'-propylbiphenyl (DTMDPB), using an enrichment culture termed as BG1. Our findings revealed that 67.5 ± 2.1% of the initially added DTMDPB was transformed in 10 days under optimal conditions. A total of 14 microbial transformation products obtained due to a series of reactions (e.g., reductive defluorination, ether bond cleavage, demethylation, oxidative hydroxylation and aromatic ring opening, sulfonation, glucuronidation, O-methylation, and thiolation) were identified. Consortium BG1 harbored essential genes that could transform DTMDPB, such as dehalogenation-related genes [e.g., glutathione S-transferase gene (GST), 2-haloacid dehalogenase gene (2-HAD), nrdB, nuoC, and nuoD]; hydroxylating-related genes hcaC, ubiH, and COQ7; aromatic ring opening-related genes ligB and catE; and methyltransferase genes ubiE and ubiG. Two DTMDPB-degrading strains were isolated, which are affiliated with the genus Sphingopyxis and Agromyces. This study provides a novel insight into the microbial transformation of FLCMs. The findings of this study have important implications for the development of bioremediation strategies aimed at addressing sites contaminated with FLCMs.