Liquid chromatography-UV Research Articles

Comparative Analysis of Pharmaceutical Persistence in Canadian Wastewater Treatment Plants Utilizing Molecularly Imprinted Polymers and Commercial Solid Phase Extraction Sorbents

In this study, the performances of a synthesized Molecularly Imprinted Polymer (MIP) and a commercial Solid Phase Extraction (SPE) cartridge were compared in terms of the removal efficiency and quantification of pharmaceutical compounds in wastewater samples. Concentration analysis of Emtricitabine, Tenofovir, Naproxen, Diclofenac, Ibuprofen, and Efavirenz was conducted in influent, primary effluent, secondary effluent, and post-chlorination water samples using liquid chromatography-UV detection. Regressions analysis revealed high linearity (R2 values from 0.9980 to 0.9999) for the compounds, alongside recoveries ranging from 90.9% to 100%. The method detection limits (MDLs) were also determined. Removal efficiencies were computed, with Naproxen and Ibuprofen demonstrating complete removal (100%), while other compounds displayed different of removal efficiency levels. The MIP was found to perform slightly better than traditional SPE cartridges in terms of selectivity, efficiency, and overall performance. This study provides valuable insights into the concentrations of target compounds at various treatment stages, emphasizing the importance of choosing extraction cartridges in wastewater treatment processes.

Investigational Study of Mesalamine Dissolution Discrepancy: Utilization of Hyphenated Ultrahigh Performance Liquid Chromatography‐Charged Aerosol Detection‐High‐Resolution Mass Spectrometry

ABSTRACTPentasa (mesalamine/MSLM) is a widely prescribed delayed‐release capsule formulation for the treatment of inflammatory bowel disease. During dissolution study of Pentasa through ultraviolet (UV) spectroscopy, an unusual end‐release of about 110% has been observed. Initial liquid chromatography‐UV (LC‐UV) analyses of these dissolution samples confirmed three prominent peaks other than MSLM with a significant area percentage. Further systematic investigation was carried out by incubating active pharmaceutical ingredient in dissolution media for a longer duration and at elevated temperature followed by analysis through an inverse gradient LC‐charged aerosol detector (CAD). LC–high‐resolution mass spectrometry (HRMS) and online hydrogen‐deuterium exchange (HDX) mass spectrometry were also employed to identify and characterize these artifact products. The area % of prominent artifacts in LC‐UV was found to be way significant when compared to the area % obtained through inverse LC‐CAD, as CAD quantifies the peaks independent of the UV wavelength of absorbance. Inverse LC‐CAD was suitable to determine the relative response factor, whereas LC‐HRMS/MS and online HDX‐MS supported the characterization of these artifacts. These artifacts were found to be trimers, tetramers of MSLM formed due to polymerization, imparting additional pi‐bonds resulting in high UV absorptivity. These techniques when used in combinations serve complimentary to each other during such investigations.

Tailoring supramolecular solvents with phosphoryl groups for highly efficient extraction of chlorophenols in natural waters

BackgroundChlorophenols are routinely determined in aquatic systems to check compliance with the restrictive international legislations set for protection of human and aquatic life. Their control requires affordable analytical methods, particularly in labs at low- and medium-income countries. Liquid chromatography-UV detection is a convenient technique for this purpose, but the availability of suitable sample processing remains pending. Organic solvents are inefficient for extracting the whole range of chlorophenols whereas solid-phase extractions are expensive and labour-intensive. So, an efficient, fast and cheap extraction of chlorophenols, amenable to any lab, would help to cope with their worldwide analytical control in natural waters. ResultsA supramolecular solvent (SUPRAS) was tailored for providing mixed interaction mechanisms aimed at the efficient extraction of chlorophenols prior to LC-UV. The SUPRAS was synthesized from the self-assembly of hexylphosphonic acid under acidic conditions and consisted of sponge-like nanostructures made up of amphiphile and water. The phosphoryl (PO) group was selected as the major driver of the extraction because of its ability to act as halogen and hydrogen bond acceptor for chlorophenols. Additional interactions were hydrogen bonds from O–H amphiphilic groups and the surrounding water, and dispersion and CH-π interactions in the hydrocarbon chains. The number of binding sites in the SUPRAS could be modulated by addition of salt. The SUPRAS formed in situ in the sample, the extraction took 5 min, the concentration factor was around 220, quantification limits (0.1–0.3 μg L−1) were below the EU standards, and the method worked for natural waters. SignificanceA fast, low-cost, and organic solvent-free sample processing only requiring conventional lab equipment (stirrers and centrifuges) provided SUPRAS extracts that could be directly analyzed by LC-UV. SUPRAS synthesis occurred spontaneously in the water sample under addition of hexylphosphonic acid and the whole process required low skills. The method meets the analytical and operational performances for the analytical control of chlorophenols in natural waters and it is within the reach of any lab.

Continuous flow membrane microextraction as a clean method for detecting codeine and papaverine in biological samples using HPLC-UV

In this study, continuous-flow membrane microextraction (CFMME) was connected online with a high-performance liquid chromatography-UV detector (HPLC-UV) for the pre-concentration and high clean-up of papaverine and codeine in biological samples. The extraction cell was designed with donor and acceptor chambers separated by a sheet membrane. By adjusting the pH of the donor phase (10 mL, pH 11), the analyte molecules were extracted into the supported liquid membrane (SLM) (15 μL of 1-octanol). The donor solution was circulated through the donor chamber using a peristaltic pump and magnetically agitated by a bar stirrer placed near the membrane, enhancing the diffusion and convection flow of the targeted drugs from the donor solution to the SLM. Subsequently, by adjusting the acceptor solution to an acidic pH of 2 (100 μL), the drugs in ionic form were reversely extracted into the acceptor phase. The procedure exhibited desirable relative standard deviation (RSD%) of less than 3.70%, linear ranges of 7-600 ng mL-1 for codeine and 2.0-600 ng mL-1 for papaverine, and limits of detection of 2.0 ng mL-1 for codeine and 0.6 ng mL-1 for papaverine. The design of the extraction cell significantly improved the performance for determining targeted drugs in complex matrices such as plasma and urine.

(Deep eutectic solvent-ionic liquid)-based ferrofluid a new class of magnetic colloids for determination of tamoxifen and its metabolites in human plasma samples

In this research, a novel category of magnetic colloid was created by immobilizing an ionic liquid on the surface of silica-coated magnetic particles. This was followed by utilizing a natural hydrophobic deep eutectic solvent as a carrier. This magnetic colloid served as an adsorbent in dispersive solid-phase microextraction, combined with liquid chromatography-UV detection, for analyzing tamoxifen and its three active metabolites in plasma samples. After optimizing the effective variables in the analysis, the method underwent validation. Linearity was observed in the calibration model between 0.2 and 5.0 µg/L. The range of the detection limit was found to be 0.2–200.0 µg/L. Assessing the method's precision involved evaluating the intra- and inter-day precision at three analyte concentrations, which determined less than 7.5 % and 11.2 %, respectively. Moreover, the accuracy fell between 94.3 % and 105.1 %. The method's feasibility was evaluated using human plasma samples that ranged in concentrations of tamoxifen, N-desmethyltamoxifen, 4-hydroxytamoxifen, and endoxifen, respectively, from 28.3 to 39.7, 25.9–42.7, ≈1.3, and 3.4–7.2 μg L-1. Among the many benefits of this approach is the removal of the requirement for additional electronic accessories and dispersive solvents. It also minimizes the sample size, making it easily automatable. The method's applicability was demonstrated using human plasma samples, which provided quantification ranges for various tamoxifen metabolites. This technique has a lot of potential for studying the pharmacodynamics, therapeutic drug monitoring, andpharmaceutical kineticsof tamoxifen and its metabolites in bodily fluids, which will help with clinical research and drug analysis.

Electrospun of functionalized mesoporous UiO-66 as the selective coating of solid phase microextraction Arrow for the determination of nine alkylphenols.

A solid-phase microextraction (SPME) Arrow and high-performance liquid chromatography-UV detector (HPLC-UV, detection at 225nm) based method was developed for the selective determination of nine alkylphenols (APs) in milk. The functionalized mesoporous UiO-66 (4-meso-UiO-66) was utilized as the new coating material, which was synthesized by post-modification of pore-expanded UiO-66-NH2 by an esterification reaction with 4-pentylbenzoic acid. It was fully characterized by X-ray photoelectron spectroscopy (XPS), fourier transformation infrared spectrometry, nitrogen sorption-desorption test, scanning electron microscopy, transmission electron microscopy, and X-ray diffractometer. The characterization results showed the ester groups and benzene rings were introduced into the 4-meso-UiO-66, and the mesoporous structure was predominant in the 4-meso-UiO-66. The extraction mechanism of 4-meso-UiO-66 to APs is the synergistic effect of Zr-O electrostatic interaction and the size exclusion effect resulting from XPS, selectivity test, and nitrogen sorption-desorption test. The electrospinning technique was utilized to fabricate the 4-meso-UiO-66 coated SPME Arrow and polyacrylonitrile (PAN) was used as the adhesive. The mass rate of 4-meso-UiO-66 to PAN and the electrospinning time were evaluated. The extraction and desorption parameters were also studied. The linear range of this method was 0.2-1000μg L-1 with a coefficient of determination greater than 0.9989 under the optimal conditions. The detection limits were 0.05-1μg L-1, the inter-day and intra-day precision (RSD) were 2.8-11.5%, and the recovery was 83.6%-112%. The reusability study showed that the extraction performance of this new SPME Arrow could be maintained after 80 adsorption-desorption cycles. This method showed excellent applicability for the selective determination of APs in milk.

An improved workflow for the development of MS-compatible liquid chromatography assay purity and purification methods by using automated LC Screening instrumentation and in silico modeling.

The development of liquid chromatography UV and mass spectrometry (LC-UV-MS) assays in pharmaceutical analysis is pivotal to improve quality control by providing critical information about drug purity, stability, and presence and identity of byproducts and impurities. Analytical method development of these assays is time-consuming, which often causes it to become a bottle neck in drug development and poses a challenge for process chemists to quickly improve the chemistry. In this study, a systematic and efficient workflow was designed to develop purity assay and purification methods for a wide range of compounds including peptides, proteins, and small molecules with MS-compatible mobile phases (MP) by using automated LC screening instrumentation and in silico modeling tools. Initial LC MPs and chromatography column screening experiments enabled quick identification of conditions which provided the best resolution in the vicinity of the target compounds, which is further optimized using computer-assisted modeling (LC Simulator from ACD/Labs). The experimental retention times were in good agreement with the predicted retention times from LC Simulator (ΔtR < 7%). This workflow presents a practical workflow to significantly expedite the time needed to develop optimized LC-UV-MS methods, allowing for a facile, automatic method optimization and reducing the amount of manual work involved in developing new methods during drug development.

Effect of Dexketoprofen on the Disposition Kinetics of Moxifloxacin in Plasma and Lung in Male and Female Rats.

The simultaneous use of NSAIDs and antibiotics is recommended for bacterial diseases in human and veterinary medicine. Moxifloxacin (MFX) and dexketoprofen (DEX) can be used simultaneously in bacterial infections. However, there are no studies on how the simultaneous use of DEX affects the pharmacokinetics of MFX in rats. The aim of this study was to determine the effect of DEX on plasma and lung pharmacokinetics of MFX in male and female rats. A total of 132 rats were randomly divided into 2 groups: MFX (n=66, 33 males/33 females) and MFX+DEX (n=66, 33 females/33 males). MFX at a dose of 20 mg/kg and DEX at a dose of 25 mg/kg were administered intraperitoneally. Plasma and lung concentrations of MFX were determined using the highperformance liquid chromatography-UV and pharmacokinetic parameters were evaluated by noncompartmental analysis. Simultaneous administration of DEX increased the plasma and lung area under the curve from 0 to 8 h (AUC0-8) and peak concentration (Cmax) of MFX in rats, while it significantly decreased the total body clearance (CL/F). When female and male rats were compared, significant differences were detected in AUC0-8, Cmax, CL/F and volume of distribution. The AUC0-8lung/AUC0-8plasma ratios of MFX were calculated as 1.68 and 1.65 in female rats and 5.15 and 4.90 in male rats after single and combined use, respectively. MFX was highly transferred to the lung tissue and this passage was remarkably higher in male rats. However, DEX administration increased the plasma concentration of MFX in both male and female rats but did not change its passage to the lung. However, there is a need for a more detailed investigation of the difference in the pharmacokinetics of MFX in male and female rats.

Preparation of a highly specific and sensitive monoclonal antibody against tilmicosin and its application in lateral flow immunoassay

To reduce the false positive results caused by cross reactivity of the antibodies with other structural analogues, it is crucial to prepare a high specificity and sensitivity antibody against target for developing an accurate immunoassay. In this study, tilmicosin (TM) was selected as a model molecule. Firstly, two-dimensional similarity, electrostatic potential energy, mulliken atomic charges and overlapping of different haptens with TM were calculated using Gaussian 09W and Discovery studio, and the newly designed TM-HS was selected as the optimal hapten. Furthermore, a monoclonal antibody (mAb 12C8) was produced with the half maximal inhibitory concentration (IC50) of 0.36 ng/mL, and negligible cross-reactivity (CR) with other antibiotics. Finally, a lateral flow immunoassay (LFA) for the detection of TM based on amorphous carbon nanoparticles (ACNPs) labeled mAb 12C8 was developed by the reflectance value under natural light. The recoveries of TM ranged from 83.18% to 103.25% with a coefficient of variation (CV) < 12.47%. The results showed that the cut-off value of TM in milk samples was 1 ng/mL, and the limits of detection (LODs) for chicken muscle, bovine muscle, porcine muscle and porcine liver samples were 5.23, 5.98, 6.85 and 7.31 μg/kg, respectively. In addition, 40 real samples were tested by the LFA, and the detection results were consisted with that of high-performance liquid chromatography-UV detector (HPLC–UV). Those results indicated that the developed LFA is an accurate and useful tool for on-site screening of TM in milk and animal tissues.

Analysis of Softwood Lignans by Comprehensive Two-Dimensional Liquid Chromatography.

Lignans constitute a large group of phenolic plant secondary metabolites possessing high bioactivity. Their accurate determination in plant extracts with a complex chemical composition is challenging and requires advanced separation techniques. In the present study, a new approach to the determination of lignans in coniferous knotwood extracts as the promising industrial-scale source of such compounds based on comprehensive two-dimensional liquid chromatography separation and UV spectrophotometric detection is proposed. First and second-dimension column screening showed that the best results can be obtained using a combination of non-polar and polar hydroxy group embedded octadecyl stationary phases with moderate (~40%) "orthogonality". The optimization of LC × LC separation conditions allowed for the development of a new method for the quantification of the five lignans (secoisolariciresinol, matairesinol, pinoresinol, 7-hydroxymatairesinol, and nortrachelogenin) in knotwood extracts with limits of quantification in the range of 0.27-0.95 mg L-1 and a linear concentration range covering at least two orders of magnitude. Testing the developed method on coniferous (larch, fir, spruce, and pine) knotwood extracts demonstrated the high selectivity of the analysis and the advantages of LC × LC in the separation and accurate quantification of the compounds co-eluting in one-dimensional HPLC.

Establishing an integrated, four-dimensional quality assessment system for traditional Chinese medicine: A case study of Shuanghuanglian oral liquid

The quality of traditional Chinese medicine (TCM) is the premise to ensure its safety and effectiveness in clinical application. In this study, a complete quality control system for four-dimensional fingerprinting of TCM was innovatively constructed based on multiple detection techniques, and the quality of Shuanghuanglian oral liquid (SHL) was evaluated. Electrochemical fingerprinting (ECFP) as an emerging method without pretreatment provides rich and quantifiable information for SHL samples. The first quantitative ECFP of SHL was developed by the B-Z oscillation system. Eight characteristic parameters were analyzed and a good linear relationship was found between the oscillation lifetime and sample volume, by which the calculated values of the added sample volume (VL) showed different fluctuations between samples. What is more, high-performance liquid chromatography five-wavelength fusion fingerprint (HPLC-FWFP), GC fingerprint (GC-FP), and UV quantum fingerprint (UV-QFP) was established. Meanwhile, the purity of the peaks of the HPLC-FWFP was verified by the dual-wavelength absorption coefficient ratio spectrum (DWAR). Equal weighted ratio quantitative fingerprinting method (EWRQFM) was successfully proposed to extract all potential features for the overall quality assessment of the samples. Finally, a comprehensive evaluation strategy was proposed, namely the variation coefficient weighting algorithm (VCWA). The results of qualitative and quantitative evaluation of HPLC-FWFP, GC-FP, electrochemical quantum fingerprints (EC-QFP), and UV-QFP were integrated by this method. The established evaluation system is also a suitable strategy to control the quality of other TCM preparations.

Carbohydrate-based quality consistency evaluation of Saposhnikoviae Radix

This study aims to evaluate the quality consistency of Saposhnikoviae Radix based on carbohydrates, and explore the potential of carbohydrates as the internal quality control indicators of Saposhnikoviae Radix. The total polysaccharides were quantified by UV-Vis spectrophotometry and the molecular weight range of the polysaccharides was determined by high performance gel-permeation chromatography-evaporative light scattering detection(HPGPC-ELSD). The monosaccharides in polysaccharides and the free monosaccharides were quantified by high performance liquid chromatography-UV detection(HPLC-UV), and the oligosaccharides and fructose were quantified by high performance liquid chromatography-evaporative light scattering detection(HPLC-ELSD). The carbohydrate-based quality of Saposhnikoviae Radix was compared among 45 batches of commercial samples and 13 batches of self-collected samples. The results showed that the molecular weight distribution, monosaccharide composition, oligosaccharide, and free monosaccharide composition were similar in the 58 batches of samples. The average content of total polysaccharides, oligosaccharides, and total free monosaccharides in commercial samples were 39.66, 148.79, and 68.62 mg·g~(-1), respectively. The content showed significant differences among batches, with the highest differences of 3.51, 1.75, and 2.58 times, respectively. The RSD of the relative ratios of monosaccharides in the polysaccharides in commercial samples reached 28%-45%. The average content of total polysaccharides, oligosaccharides, and total free monosaccharides in self-collected samples were 68.07, 145.76, and 42.04 mg·g~(-1), respectively, with the inter-region differences of 2.88, 1.88, and 1.07 times, respectively. The RSD of the relative ratios of monosaccharides in polysaccharides in self-collected samples ranged from 8.2% to 59%. The total polysaccharides and total free monosaccharides in self-collected samples were 1.72 times higher and 1.63 times lower, respectively, than those in commercial samples. The content of oligosaccharides was similar between self-collected samples and commercial samples. To sum up, carbohydrates are one of the material bases for the internal quality consistency of Saposhnikoviae Radix. The qualitative characteristics of polysaccharides and the quantitative characteristics of polysaccharides and oligosaccharides are related to the origin of medicinal materials. Moreover, the quantitative characteristics of polysaccharides and free monosaccharides may be related to the storage conditions. Carbohydrates are potential indicators for the quality control of Saposhnikoviae Radix and deserve attention.

Bioanalytical method development for quantification of trifluridine with its metabolites and tipiracil in spiked human plasma by solid-phase extraction (SPE) and HPLC with PDA detection

A novel high pressure liquid chromatography method coupled with diode array detector (HPLC-DAD) was developed and found to be efficient, sensitive, and selective for the simultaneous analysis of Trifluridine (TRI), and its metabolites 5-trifluoromethyl uracil (TFMU) and 5-carboxydeoxyuridine (CDMU) and Tipiracil (TIP) in a spiked human plasma. The HPLC-DAD technique that developed was validated in accordance with the most recent ICH M10 criteria. Sample pre-treatment was performed using a solid phase extraction with InertSep HLB reversed phase sorbent 30 mg/ml cartridge. The compounds were analyzed by liquid chromatography UV detection on a Inertsil C18 (250 mm × 4.6 mm ID, Particle size: 5 µm) with a mobile phase containing sodium acetate buffer pH (3.8; 10 mM) - acetonitrile (70:30, v/v) with flow rate of 0.8 ml/min with UV detection at 254 nm. The method was linear in the range 200–5000 ng/ml for TRI, TFMU, CDMU, and 100–1500 ng/ml for TIP. With the exception of the lower limit of quantification, where they were within ≤ 20%. The accuracy and precision for spiked human plasma were within ≤ 15% for all concentrations.

Developing a Method for Quantifying Meropenem in Children-Volumetric Adsorptive Microsampling Versus Plasma Sampling.

Meropenem is a carbapenem antibiotic often used in pediatric intensive care units due to its broad spectrum of activity. Therapeutic drug monitoring (TDM) is a useful tool to increase the effectiveness of meropenem by adjusting the dose based on plasma levels; however, the relatively large sample volume required for TDM can limit its use in children. Therefore, this study aimed to determine meropenem concentrations and consequently perform TDM effectively using the smallest possible sample volume. Volumetric absorptive microsampling (VAMS) is a sampling technology developed to collect a small, precise volume of blood. For the applicability of VAMS in TDM, plasma concentrations must be reliably calculated from whole blood (WB) collected by VAMS. VAMS technology using 10 µL of WB was evaluated and compared with EDTA-plasma sampling. High-performance liquid chromatography with UV detection was applied to quantify meropenem in VAMS and plasma samples after the removal of proteins by precipitation. Ertapenem was used as the internal standard. Samples were collected simultaneously from critically ill children receiving meropenem using VAMS and traditional sampling. It was found that no consistent factor could be determined to calculate meropenem plasma concentrations from the WB, indicating that VAMS was not reliable in the TDM of meropenem. Therefore, to reduce the required sample amount in pediatric patients, a method for quantifying meropenem from 50 µL of plasma with a lower limit of quantification of 1 mg/L was developed and successfully validated. A simple, reliable, and low-cost method was established using high-performance liquid chromatography-UV to determine the concentration of meropenem in 50 µL of plasma. VAMS using WB does not seem to be suitable for TDM of meropenem.

Keggin type phosphotungstic acid intercalated copper-chromium-layered double hydroxide reinforced porous hollow fiber as a sorbent for hollow fiber solid phase microextraction of selected chlorophenols besides their quantification via high performance liquid chromatography

Herein, a copper-chromium-layered double hydroxide (Cu/Cr-LDH) was synthesized by the co-precipitation method. The Cu/Cr-LDH was intercalated to the Keggin-type polyoxometalate (H3PW12O40). The modified LDH accommodated in the pores of hollow fiber (HF), to prepare the extracting device for the HF-solid phase microextraction method (HF-SPME). The method was used for the extraction of 4-chlorophenol, 2,4-dichlorophenol, and 2,4,6- trichlorophenol from tap water, river water, and tea sample. The extracted target analytes were quantified via high-performance liquid chromatography-UV detection. The figures of merit of the method such as, linear dynamic ranges (LDRs), limit of detections (LODs) and, limit of quantifications (LOQs), were determined based on the obtained optimum condition. Based on the results, the LDR was between 1 and 500 μg L − 1 and r2 higher than 0.9960. The LODs and LOQs were obtained in the ranges of 0.28–0.36 µg L − 1 and 0.92–1.1 µg L − 1, respectively. The relative standard deviations ((RSDs% for inter-and intra-day) of the method for the extraction of target analytes were calculated in two different concentrations of (2 and 10 μg L − 1) and (5 and 10 μg L − 1) between 3.70% - 5.30% and 3.50% - 5.70%-respectively. The enrichment factors were obtained between 57 and 61. In order to investigate the accuracy of the method, also the relative recovery was obtained, between 93 and 105%. Finally, the proposed method was used for the extraction of the selected analytes in different water and tea samples.

A Novel Two-Dimensional Liquid Chromatography Combined with Ultraviolet Detection Method for Quantitative Determination of Pyridoxal 5'-Phosphate, 4-Pyridoxine Acid and Pyridoxal in Animal Plasma.

Vitamin B6 is an indispensable micronutrient in organisms and is widely distributed in blood, tissues, and organs. Changes in the content and ratio of vitamin B6 can affect the entire physiological condition of the body, so it becomes particularly important to reveal the relationship between changes in its content and disease by monitoring vitamin B6 levels in the organism. In this study, a two-dimensional liquid chromatography-UV detector (2D-LC-UV) was used to establish a method for the simultaneous detection of PLP, PA, and PL for the first time. First, PLP, PA, and PL were extracted with plasma: 0.6 M TCA: ultrapure water = 1:2:3 (v/v/v) and then derivatized. Enrichment and preliminary separation were performed on a one-dimensional column and automatically entered into a two-dimensional column for further separation. This method exhibited good selectivity, and the correlation coefficients for the analyte calibration curves were >0.99. The detection limits for PLP, PA, and PL were 0.1, 0.2, and 4 nmol/L, respectively. The results showed that the system has high loading capacity, excellent resolution, and a good peak shape. This method is expected to provide applicability for the determination of PLP, PA, and PL in pharmacological, pharmaceutical, and clinical research.

Validation of modified QuEChERS extraction method for quantitative enrichment of seven multiclass antibiotic residues from vegetables followed by RP-LC-UV analysis

A modified rapid, simple quick, cheap, effective, robust and safe (QuEChERS) extraction method was developed for the simultaneous extraction and purification of seven antibiotic residues in lettuce, carrot and tomato using liquid chromatography UV detector. The method was validated for linearity, sensitivity, accuracy, repeatability, and reproducibility at six concentration levels for all matrices, according to the guidelines of UNODC. A matrix-matched calibration method was used for the quantitative analysis. Linear range of 0.01–250 μg kg−1 for target compounds with correlation coefficient (R2) 0.9978–0.9995 was obtained. The limits of detections (LODs) and quantifications (LOQs) were 0.02–2.48 μg kg−1 were 0.06–7.52 μg kg−1, respectively. The average recoveries of the seven antibiotics ranged from 74.5 to 105.9%, with relative standard deviation RSD (%) < 11, for all matrices and matrix effects were less than 20% for most of compounds. This comprehensive simple QuEChERS extraction method can be used for the investigation of multi-residue drugs belonging to different chemical families in vegetables.

Application of oxidized multi-walled carbon nanotubes and zeolite nanoparticles for simultaneous preconcentration of codeine and tramadol in saliva prior to HPLC determination

In this work, a dispersive micro-solid phase extraction technique along with high-performance liquid chromatography-UV detection was developed for simultaneous preconcentraion and determination of trace levels of codeine and tramadol in human saliva. This method is based on the adsorption of codeine and tramadol on a mixture of oxidized multi-walled carbon nanotubes and zeolite Y nanoparticles with 1:1 ratio as an efficient nanosorbent. Various analytical parameters influencing the adsorption step including the amount of adsorbent, the pH of the sample solution, the temperature, the stirring rate, the contact time of the sample solution, and the adsorption capacity were investigated. Based on the results, 10 mg adsorbent, sample solutions with pH = 7.6, temperature of 25 °C, stirring rate 750 rpm and contact time 15 min, in the adsorption step shows the best results for both drugs. Then the effective parameters on the analyte desorption stage such as the type of desorption solution, pH of the desorption solution, desorption time and desorption volume were investigated. Studies have shown that water/methanol (50:50 v/v) as desorption solution, pH = 2.0, desorption time of 5 min and desorption volume of 2 ml gives the best results.Chromatographic separation was performed on a RP-Shim-pack CLC-ODS-C18 column (250 mm × 4.6 mm, 5 µm) with isocratic mode. The mobile phase contained of acetonitrile:phosphate buffer (18:82, v/v) at pH = 4.5 and the flow rate was 1 ml.min−1. The wavelength of UV detector was adjusted at 210 nm and 198 nm for codeine and tramadol, respectively.Under optimum conditions, the extraction efficiencies of 98.5% and 99.2% were achieved for codeine and tramadol respectively. Enrichment factor of 13, detection limit of 0.3 μg L−1, relative standard deviation of 4.07 for codeine; and an enrichment factor of 15, a detection limit of 0.15 μg L−1, and standard deviation of 2.06 for tramadol were calculated. The linear range of the procedure for each drug was 1.0 to 1000 μg L−1. This method was successfully applied for the analysis of codeine and tramadol in saliva samples.

Effect of Encapsulation Material on Lipid Bioaccessibility and Oxidation during In Vitro Digestion of Black Seed Oil.

Different encapsulation materials might not only affect lipid hydrolysis but also lipid oxidation during in vitro digestion. Thus, this study aimed to investigate the effect of two commonly used shell materials, starch and gelatin, on the extent of lipolysis and bioaccessibility of the main and some minor lipid compounds, as well as on the oxidative status in encapsulated black seed oil (Nigella sativa) during in vitro digestion. The study was carried out using 1H nuclear magnetic resonance spectroscopy, liquid chromatography-mass spectrometry and high-performance liquid chromatography-UV. It was shown that starch increased the level of lipid hydrolysis in black seed oil during gastric in vitro digestion, while no differences were observed in the intestinal digestates between starch-encapsulated oil and gelatin-encapsulated oil. Similarly, the bioaccessibility of minor compounds (tocopherols, sterols and thymoquinone) was not influenced by the shell materials. However, regarding lipid oxidation, a 20- and 10-fold rise of free oxylipins was obtained in oils encapsulated by starch and gelatin, respectively, after intestinal in vitro digestion. This study evidenced that gelatin rather than starch should be used for the encapsulation of oils to minimize the digestion-induced formation of bioactive oxylipins.

Studies on a novel method for the determination of nitrosamines in food by HPLC-UV-FLD coupling with terbium-doped carbon dots

In this paper, a novel, selective and sensitive high performance liquid chromatography-UV photolysis-fluorescence detection (HPLC-UV-FLD) method for nitrosamines (NAs) is proposed based on terbium-doped carbon dots (Tb-CDs). Experimental studies have shown that nitrosamines can be degraded by UV photolysis with wavelength at 254 nm to produce NO2−, while NO2− can rapidly and specifically quench the fluorescence of Tb-CDs. Based on this principle, N-nitrosodimethylamine (NDMA), Nnitrosomorpholine (NMor), N-nitrosopyrrolidine (NPYR), N-nitrosodiethylamine (NDEA) and N-nitrosopiperidine (NPIP) are separated within 8 min by HPLC. These five kinds of NAs showed a good linear relationship in the range of 10–2000 μg/L, and the limit of detection was as low as 2.25 μg/L. The proposed method is successfully applied to the detection of sweet potato, lotus root, potato, water chestnut, tomato and cucumber. The sample recoveries range from 77.35 % to 119.3 %.