Lignin Substances Research Articles

Oxidative Catalytic Depolymerization of Lignin into Value-Added Monophenols by Carbon Nanotube-Supported Cu-Based Catalysts

Lignin valorisation into chemicals and fuels is of great importance in addressing energy challenges and advancing biorefining in a sustainable manner. In this study, on the basis of the high microwave absorption performance of carbon nanotubes (CNTs), a series of copper-oxide-loaded CNT catalysts (CuO/CNT) were developed to facilitate the oxidative depolymerization of lignin under microwave heating. This catalyst can promote the activation of hydrogen peroxide and air, effectively generating a range of reactive oxygen species (ROS). Through the application of electron paramagnetic resonance techniques, these ROS generated under different oxidation conditions were detected to elucidate the oxidation mechanism. The results demonstrate that the •OH and O2•− play a crucial role in the formation of aldehyde and ketone products through the cleavage of lignin Cβ-O and Cα-Cβ bonds. We further evaluated the catalytic performance of the CuO/CNT catalysts with three typical lignin feedstocks to determine their applicability for lignin biorefinery. The bio-enzymatic lignin produced a 13.9% monophenol yield at 200 °C for 20 min under microwave heating, which was higher than the 7% yield via hydrothermal heating conversion. The selectivity of G-/H-/S-type products was slightly affected, while lignin substrate had a noticeable effect on the selective production. Overall, this study explored the structural characteristics of CuO/CNT catalysts and their implications for lignin conversion and offered an efficient oxidation approach that holds promise for sustainable biorefining practices.

Highly efficient lignin depolymerization and enhanced bio-oil upgrading via in-situ hydrogenation: Impact of lignin structure

The inherent structural rigidity of lignin poses a significant challenge to its direct hydrogenation to produce aromatic compounds, requiring harsh reaction conditions. In this study, microwave-assisted hydrothermal liquefication was employed to rapidly generate raw bio-oil under mild conditions, coupled with an in-situ hydrogenation strategy to upgrade its quality. A series of lignin substrates were characterized to establish the relationship between lignin characteristics and aromatic products. Grass lignin can produce low molecular weight bio-oil in high yields (50.4–60.7 %) within 30 min at 180 °C, which is attributed to the abundance of cleavable β-O-4 linkages in its uniform structure. In contrast, softwood lignin with abundant guaiacyl (G) units possessed a robust thermal stability, resulting in a low monomer yield, but a high selectivity to G-type products (97 %). The raw bio-oil was further upgraded through in-situ hydrogenation with Pd catalysts. Low reaction temperatures (60–100 °C) favored the hydrogenation of aromatic aldehydes and ketones to their alcohol products, while high temperatures (100–220 °C) promoted the deep hydrogenation of aromatic side chains to alkyl products. Besides, an upgraded bio-oil with a higher heating value (29.8 MJ/kg) was obtained. Furthermore, the hydrogenation mechanism was investigated through the kinetics of simulated bio-oils. The activation energy follows the order: dimer β-O-4 linkage < monomer aldehyde group < ketone group < CC linkage, which is consistent with the hydrogenation kinetics observed in real lignin bio-oil. Overall, this study highlights the impact of lignin characteristics on subsequent conversion and alsoenhances our understanding of the complex depolymerization/hydrogenation mechanisms during lignin upgrading.

Heterologous expression and characterization of a dye-decolorizing peroxidase from Ganoderma lucidum, and its application in decolorization and detoxifization of different types of dyes.

Dye-decolorizing peroxidases (DyPs) belong to a novel superfamily of heme peroxidases that can oxidize recalcitrant compounds. In the current study, the GlDyP2 gene from Ganoderma lucidum was heterologously expressed in Escherichia coli, and the enzymatic properties of the recombinant GlDyP2 protein were investigated. The GlDyP2 protein could oxidize not only the typical peroxidase substrate ABTS but also two lignin substrates, namely guaiacol and 2,6-dimethoxy phenol (DMP). For the ABTS substrate, the optimum pH and temperature of GlDyP2 were 4.0 and 35°C, respectively. The pH stability and thermal stability of GlDyP2 were also measured; the results showed that GlDyP2 could function normally in the acidic environment, with a T50 value of 51°C. Moreover, compared to untreated controls, the activity of GlDyP2 was inhibited by 1.60 mM of Mg2+, Ni2+, Mn2+, and ethanol; 0.16 mM of Cu2+, Zn2+, methanol, isopropyl alcohol, and Na2EDTA·2H2O; and 0.016 mM of Fe2+ and SDS. The kinetic constants of recombinant GlDyP2 for oxidizing ABTS, Reactive Blue 19, guaiacol, and DMP were determined; the results showed that the recombination GlDyP2 exhibited the strongest affinity and the most remarkable catalytic efficiency towards guaiacol in the selected substrates. GlDyP2 also exhibited decolorization and detoxification capabilities towards several dyes, including Reactive Blue 19, Reactive Brilliant Blue X-BR, Reactive Black 5, Methyl Orange, Trypan Blue, and Malachite Green. In conclusion, GlDyP2 has good application potential for treating dye wastewater.

Responses of soil organic carbon compounds to phosphorus addition between tropical monoculture and multispecies forests

Tropical forests are sensitive to nitrogen (N) and phosphorus (P) availability, and under nutrient application the variation of soil organic carbon (SOC) preserving mechanism remains to be explored. To reveal the forest-specific SOC preservation via biochemical selection in response to nutrient application, we investigated a monoculture (Acacia plantation) and a multispecies forest both with chronic fertilization in subtropical regions, and measured specific fingerprints of plant- and microbial-derived C compounds. In addition, to quantify the effect of P application on SOC content among tropical forests, we conducted a meta-analysis by compiling 125 paired measurements in field experiments from 62 studies. In our field experiment, microbial community composition and activity mediated forest-specific responses of SOC compounds to P addition. The shift of community composition from fungi towards Gram-positive bacteria in the Acacia plantation by P addition led to the consumption of microbial residual C (MRC) as C source; in comparison, P addition increased plant species with less complex lignin substrates and induced microbial acquisition for N sources, thus stimulated the decomposition of both plant- and microbial-derived C. Same with our field experiment, bulk SOC content had neutral response to P addition among tropical forests in the meta-analysis, although divergences could happen among experimental durations and secondary tree species. Close associations among SOC compounds with biotic origins and mineral associated organic C (MAOC) in the multispecies forest suggested contributions of both plant- and microbial-derive C to SOC stability. Regarding that fungal MRC closely associated with MAOC and consisted of soil N pool which tightly coupled to SOC pool, the reduce of fungal MRC by chronic P addition was detrimental to SOC accumulation and stability in tropical forests.

Steam explosion-treated mushroom substrate for robust and water-resistant wood composites

Despite its significant biomass content, mushroom substrate (MS) is often carelessly discarded as waste following the harvest of edible fungi. Therein, we harnessed the power of steam explosion (SE) to liberate fibers from discarded MS and substantially increase their surface area for improved binding. Consequently, we successfully fabricated robust and water-resistant wood composites via the hot pressing (HP) technique. Our research underscored the pivotal role played by the substantial lignin content (42.5 ± 2.1%) within waste MS, reinforcing the wood composites and endowing them with exceptional resistance to water-resistant properties. The wood composite derived from waste MS yielded outstanding outcomes in internal bond strength, static bending strength, and thickness swelling, registering at 4.9 MPa, 28.0 MPa, and 30.6%, respectively. These discoveries present a pioneering approach for efficiently utilizing a significant amount of MS.

Simulation and experimental evaluation of laser-induced graphene on the cellulose and lignin substrates

In this article, the formation of laser-induced graphene on the two natural polymers, cellulose, and lignin, as precursors was investigated with molecular dynamics simulations and some experiments. These eco-friendly polymers provide significant industrial advantages due to their low cost, biodegradability, and recyclable aspects. It was discovered during the simulation that LIG has numerous defects and a porous structure. Carbon monoxide, H2, and water vapor are gases released by cellulose and lignin substrates. H2O and CO are released when the polymer transforms into an amorphous structure. Later on, as the amorphous structure changes into an ordered graphitic structure, H2 is released continuously. Since cellulose monomer has a higher mass proportion of oxygen (49%) than lignin monomer (29%), it emits more CO. The LIG structure contains many 5- and 7-carbon rings, which cause the structure to have bends and undulations that go out of the plane. In addition, to verify the molecular dynamics simulation results with experimental tests, we used a carbon dioxide laser to transform filter paper, as a cellulose material, and coconut shell, as a lignin material, into graphene. Surprisingly, empirical experiments confirmed the simulation results.

Ni modulates the coordination environment of cations in Fe3O4 to efficiently catalyze lignin depolymerization

Lignin shows great potential for sustainable production of high-quality fuels and value-added chemicals. The development of efficient and highly stable multifunctional catalysts for the depolymerization of lignin into aromatic chemicals remains a great challenge. In this work, environmentally friendly NiFe2O4 spinel catalyst characterizing with rich oxygen vacancies and porous structures was constructed by introducing Ni to modulate the coordination environment of cations in Fe3O4. Under optimal conditions, the conversion of alkali lignin catalyzed by NiFe2O4 reached 91.0%, the yield of liquid product reached 83.6% and the yield of aromatic monomer products was 31.7%. Combined results from catalyst characterization, product analysis and density functional theory calculations showed that the Lewis acidic center of the catalyst was significantly improved by the introduction of Ni, which promoted the C-O bond breaking in lignin. The Ni-O-Fe structure facilitated the adsorption of lignin substrates and reaction intermediates, which resulted in the improved depolymerization efficiency of lignin. The present work provides valuable insights into the depolymerization of lignin by spinel catalysts, and offers ideas for the future design and development of binary or even ternary spinel catalysts for the depolymerization of lignin.

Double in-situ lignin modification in surfactant-assisted glycerol organosolv pretreatment of sugarcane bagasse towards efficient enzymatic hydrolysis

Organosolv pretreatment effectively fractionates lignocellulosic biomass for efficient enzymatic hydrolysis, yielding fermentable sugars. However, substantial lignin redeposition on the substrate surface and residual lignin content exacerbate lignin’s inhibitory effects on subsequent enzymatic hydrolysis. An in-situ lignin modification is proposed to address this challenge by incorporating polyethylene glycol (PEG) series into glycerol organosolv (GO) pretreatment. According to the results obtained, PEG-assisted GO pretreated substrate exhibited significantly increased sugar yield during enzymatic hydrolysis, particularly with PEG 4000, showing 35.4% higher glucose yield over 72 h. The improved glucose yield with PEG could be attributed to changes in the physicochemical structure and properties of residual lignin, mitigating its non-productive interaction with cellulase enzymes. PEG's presence in GO pretreatment also increased β-O-4 linkages preservation by 55% and reduced phenolic hydroxyl groups by 28% in lignin fragments versus no surfactants. This outcome resulted from introducing glycerol and PEG hydroxyl tails into the lignin structure, forming α-etherified lignin and rendering it more hydrophilic. Simulations confirmed strong Van Der Waals and hydrogen bonding interactions between lignin units and PEG, hindering lignin fragments repolymerization. Incorporating PEG in the organosolv pretreatment proves highly beneficial for cellulase-mediated lignocellulosic biorefinery, resembling a lignin-first strategy. The optimized process enables efficient biomass utilization for sustainable fuels and chemicals production.

Functional screening pipeline to uncover laccase-like multicopper oxidase enzymes that transform industrial lignins

Laccase-like multicopper oxidases are recognized for their potential to alter the reactivity of lignins for application in value-added products. Typically, model compounds are employed to discover such enzymes; however, they do not represent the complexity of industrial lignin substrates. In this work, a screening pipeline was developed to test enzymes simultaneously on model compounds and industrial lignins. A total of 12 lignin-active fungal multicopper oxidases were discovered, including 9 enzymes active under alkaline conditions (pH 11.0). Principal component analysis revealed the poor ability of model compounds to predict enzyme performance on industrial lignins. Additionally, sequence similarity analyses grouped these enzymes with Auxiliary Activity-1 sub-families with few previously characterized members, underscoring their taxonomic novelty. Correlation between the lignin-activity of these enzymes and their taxonomic origin, however, was not observed. These are critical insights to bridge the gap between enzyme discovery and application for industrial lignin valorization.

Advancing biomass fractionation with real-time prediction of lignin content and MWd: A kMC-based multiscale model for optimized lignin extraction

Recently, lignin has garnered significant research attention due to its abundance in nature. However, lignin is viewed as a recalcitrance factor as it impedes the overall biomass fractionation. In this regard, harsh operating conditions have been applied for the effective separation of the biomass components but they may cause substantial lignin degradation. Another problem is that the overall kinetics of lignin reactions remain limited since current models primarily focus on the cellulose fiber. These pose a challenge when developing effective fractionation strategies for industrial lignin extraction. To this end, we propose a multiscale model and develop a controller to determine the optimal operation strategy. In terms of lignin, delignification and de/repolymerization happen simultaneously but in different length and time scales. We adopted a bilayer structure of the ODEs and kinetic Monte Carlo (kMC) algorithm, accounting for the multiscale reaction kinetics. Our model provides the key outputs including the lignin content in the bulk chip and lignin molecular weight distribution, which were validated with the experiments. Subsequently, we developed a reduced-order model (ROM) for soft sensor design and formulated a model predictive controller (MPC) to determine the optimal operation strategy and then maximize the profitability.

Development of novel recombinant peroxidase secretion system from Pseudomonas putida for lignin valorisation

Pseudomonas putida is a promising strain for lignin valorisation. However, there is a dearth of stable and efficient systems for secreting enzymes to enhance the process. Therefore, a novel secretion system for recombinant lignin–depolymerising peroxidase was developed. By adopting a flagellar type III secretion system, P. putida KT-M2, a secretory host strain, was constructed and an optimal secretion signal fusion partner was identified. Application of the dye-decolourising peroxidase of P. putida to this system resulted in efficient oxidation activity of the cell-free supernatant against various chemicals, including lignin model compounds. This peroxidase-secreting strain was examined to confirm its lignin utilisation capability, resulting in the efficient assimilation of various lignin substrates with 2.6-fold higher growth than that of the wild-type strain after 72 h of cultivation. Finally, this novel system will lead efficient bacterial lignin breakdown and utilization through enzyme secretion, paving the way for sustainable lignin-consolidated bioprocessing.

Employing Cationic Kraft Lignin as Additive to Enhance Enzymatic Hydrolysis of Corn Stalk.

A water-soluble cationic kraft lignin (named JLQKL50), synthesized by combining quaternization and crosslinking reactions, was used as an additive to enhance the enzymatic hydrolysis of dilute-alkali-pretreated corn stalk. The chemical constitution of JLQKL50 was investigated by Fourier transform infrared spectroscopy, 1H nuclear magnetic resonance (NMR) and 13C NMR spectroscopy, and elemental analysis. The enzymatic hydrolysis efficiency of corn stalk at solid content of 10% (w/v) was significantly improved from 70.67% to 78.88% after 24 h when JLQKL50 was added at a concentration of 2 g/L. Meanwhile, the enzymatic hydrolysis efficiency after 72 h reached 91.11% with 10 FPU/g of cellulase and 97.92% with 15 FPU/g of cellulase. In addition, JLQKL50 was found capable of extending the pH and temperature ranges of enzymatic hydrolysis to maintain high efficiency (higher than 70%). The decrease in cellulase activity under vigorous stirring with the addition of JLQKL50 was 17.4%, which was much lower than that (29.7%) without JLQKL50. The addition of JLQKL50 reduced the nonproductive adsorption of cellulase on the lignin substrate and improved the longevity, dispersity, and stability of the cellulase by enabling electrostatic repulsion. Therefore, the enzymatic hydrolysis of the corn stalk was enhanced. This study paves the way for the design of sustainable lignin-based additives to boost the enzymatic hydrolysis of lignocellulosic biomass.

Understanding the Key Roles of pH Buffer in Accelerating Lignin Degradation by Lignin Peroxidase.

pH buffer plays versatile roles in both biology and chemistry. In this study, we unravel the critical role of pH buffer in accelerating degradation of the lignin substrate in lignin peroxidase (LiP) using QM/MM MD simulations and the nonadiabatic electron transfer (ET) and proton-coupled electron transfer (PCET) theories. As a key enzyme involved in lignin degradation, LiP accomplishes the oxidation of lignin via two consecutive ET reactions and the subsequent C-C cleavage of the lignin cation radical. The first one involves ET from Trp171 to the active species of Compound I, while the second one involves ET from the lignin substrate to the Trp171 radical. Differing from the common view that pH = 3 may enhance the oxidizing power of Cpd I via protonation of the protein environment, our study shows that the intrinsic electric fields have minor effects on the first ET step. Instead, our study shows that the pH buffer of tartaric acid plays key roles during the second ET step. Our study shows that the pH buffer of tartaric acid can form a strong H-bond with Glu250, which can prevent the proton transfer from the Trp171-H•+ cation radical to Glu250, thereby stabilizing the Trp171-H•+ cation radical for the lignin oxidation. In addition, the pH buffer of tartaric acid can enhance the oxidizing power of the Trp171-H•+ cation radical via both the protonation of the proximal Asp264 and the second-sphere H-bond with Glu250. Such synergistic effects of pH buffer facilitate the thermodynamics of the second ET step and reduce the overall barrier of lignin degradation by ∼4.3 kcal/mol, which corresponds to a rate acceleration of 103-fold that agrees with experiments. These findings not only expand our understanding on pH-dependent redox reactions in both biology and chemistry but also provide valuable insights into tryptophan-mediated biological ET reactions.

Ni- and Ni/Pd-Catalyzed Reductive Coupling of Lignin-Derived Aromatics to Access Biobased Plasticizers.

Lignin-derived aromatic chemicals offer a compelling alternative to petrochemical feedstocks, and new applications are the focus of extensive interest. 4-Hydroxybenzoic acid (H), vanillic acid (G), and syringic acid (S) are readily obtained via oxidative depolymerization of hardwood lignin substrates. Here, we explore the use of these compounds to access biaryl dicarboxylate esters that represent biobased, less toxic alternatives to phthalate plasticizers. Chemical and electrochemical methods are developed for catalytic reductive coupling of sulfonate derivatives of H, G, and S to access all possible homo- and cross-coupling products. A conventional NiCl2/bipyridine catalyst is able to access the H-H and G-G products, but new catalysts are identified to afford the more challenging coupling products, including a NiCl2/bisphosphine catalyst for S-S and a NiCl2/phenanthroline/PdCl2/phosphine cocatalyst system for H-G, H-S, and G-S. High-throughput experimentation methods with a chemical reductant (Zn powder) are shown to provide an efficient screening platform for identification of new catalysts, while electrochemical methods can access improved yields and/or facilitate implementation on larger scale. Plasticizer tests are performed with poly(vinyl chloride), using esters of the 4,4'-biaryl dicarboxylate products. The H-G and G-G derivatives, in particular, exhibit performance advantages relative to an established petroleum-based phthalate ester plasticizer.

Application of Rhodococcus jostii RHA1 glycolate oxidase as an efficient accessory enzyme for lignin conversion by bacterial Dyp peroxidase enzymes.

Lignin oxidation by bacterial dye-decolorizing peroxidase enzymes requires hydrogen peroxide as a co-substrate, an unstable and corrosive oxidant. We have identified a glycolate oxidase enzyme from Rhodococcus jostii RHA1 that can couple effectively at pH 6.5 with DyP peroxidase enzymes from Agrobacterium sp. or Comamonas testosteroni to oxidise lignin substrates without addition of hydrogen peroxide. Rhodococcus jostii RHA1 glycolate oxidase (RjGlOx) has activity for oxidation of a range of α-ketoaldehyde and α-hydroxyacid substrates, and is also active for oxidation of hydroxymethylfurfural (HMF) to furandicarboxylic acid. The combination of RjGlOx with Agrobacterium sp. DyP or C. testosteroni DyP generated new and enhanced amounts of low molecular weight aromatic products from organosolv lignin substrates, and was able to generate high-value products from treatment of lignin residue from cellulosic biofuel production, and from a polymeric humin substrate.

Transformation of plant substrates by fungi Fomitopsis pinicola

The results of chemical and thermal analysis of substrates based on the post-extraction residue of balsam poplar (Populus balsamifera L.) buds before and after bioconversion by Fp5-15 Fomitopsis pinicola fungi were compared. The thermal characteristics obtained using thermogravimetry (TG/DTG) methods are presented. The stages of thermal decomposition, their temperature intervals and the temperatures of the maxima on the DTG curves, as well as the weight loss of the samples, have been established. Studies have shown that under the action of the enzyme complex of fungi, easily and difficultly hydrolysable polysaccharides are utilized, and lignin substances also undergo changes.

Functional differentiation of two autochthonous cohabiting strains of Pleurotus ostreatus and Cyclocybe aegerita from Serbia in lignin compound degradation

In nature, woody substrates are usually degraded by entire communities of microorganisms, which are nowadays jeopardised by anthropogenic influence, making it important to define the functional specificity of every species. Two strains of autochthonous fungi from Serbian lowland forests (Pleurotus ostreatus Ser1 and Cyclocybe aegerita Ser1) have been investigated for their ability to degrade lignin substrates [oak sawdust, oak isolated cell walls, and synthetic dehydrogenative polymer (DHP)]. Measuring the activities of the enzymes involved in lignin degradation was coupled with detecting the HPLC profile of the phenolics in the fungal growth media, and the lignin loss. While Pleurotus ostreatus Ser1 appeared highly effective within a very short time span, Cyclocybe aegerita Ser1 failed to degrade lignin. This situation was supported by very high enzyme activities and the low presence of phenolics in the media of Pleurotus ostreatus Ser1, compared to very low enzyme activity and the high presence of phenolics in the media with Cyclocybe aegerita Ser1.

On the understanding of bio-oil formation from the hydrothermal liquefaction of organosolv lignin isolated from softwood and hardwood sawdust

Organosolv fractionation of hard- and softwood is applied to obtain lignin substrates utilized for bio-oil production through hydrothermal liquefaction. The resulting bio-oil properties reflect the stemming lignin chemistries.

Pd nanocubes supported on SiW12 @Co-ZIF Nanosheets for High-efficiency rupture of ether bonds in model and actual lignin

A rational design of the intrinsic lattice structure of catalysts is vitally important to address catalytic performance. Herein is reported a top-down synthesis for the fabrication of a bifunctional metallic catalyst. First, palladium nanocubes with (100) lattices planes were synthesized through a shape-control strategy; next, the as-synthesized Pd/Co-ZIF was used as a template for in-situ phase reconstruction by a spontaneous phase transformation process in the presence of H4SiW under solvothermal conditions. Ultimately, formation of 3D hierarchical flower-like bimetallic nitride nanosheets (SiW12 @Pd/Co-ZIF-NS) were generated because of this process. The SiW12 @Pd/Co-ZIF-NS catalyst not only displays excellent catalytic transfer hydrogenolysis for C-O bond cleavage of lignin dimeric substrates, but also maintains superior recycling durability due to an encapsulation phenomenon preventing aggregation. Finally, the resulting nanocomposites exhibit superior activity and good size selectivity toward catalytic transfer hydrogenolysis of the actual lignin substrates to produce a significant amount of low-molecular-weight aromatic compounds.

Periplasmic expression of Pseudomonas fluorescens peroxidase Dyp1B and site-directed mutant Dyp1B enzymes enhances polymeric lignin degradation activity in Pseudomonas putida KT2440

Expression of lignin-oxidising Pseudomonas fluorescens Dyp1B in the periplasm of Pseudomonas putida KT2440, using a tat fusion construct, was found to lead to enhanced whole cell activity for oxidation of DCP and polymeric lignin substrates. Four amino acid residues predicted to lie at the manganese ion binding site of Pseudomonas fluorescens peroxidase Dyp1B were investigated using site-directed mutagenesis. Mutants H127R and S223A showed 2-fold and 4-fold higher kcat for Mn(II) oxidation respectively, and mutant S223A showed 2-fold enhanced production of low molecular weight phenolic products from a polymeric soda lignin. The mutant Pfl Dyp1B genes were expressed as tat fusions to investigate their effect on lignin oxidation by P. putida KT2440.