Levels Of Extracellular Polymeric Substances Research Articles

Effect of microwaves combined with peracetic acid to improve the dewatering performance of residual sludge.

The activated sludge process plays a crucial role in modern wastewater treatment plants. During the treatment of daily sewage, a large amount of residual sludge is generated, which, if improperly managed, can pose burdens on the environment and human health. Additionally, the highly hydrated colloidal structure of biopolymers limits the rate and degree of dewatering, making mechanical dewatering challenging. This study investigates the impact and mechanism of microwave irradiation (MW) in conjunction with peracetic acid (PAA) on the dewatering efficiency of sludge. Sludge dewatering effectiveness was assessed through capillary suction time (CST) and specific resistance to filtration (SRF). Examination of the impact of MW-PAA treatment on sludge dewatering performance involved assessing the levels of extracellular polymeric substances (EPS), employing three-dimensional excitation-emission matrix (3D-EEM), Fourier transform-infrared spectroscopy (FT-IR), and scanning electron microscopy. Findings reveal that optimal dewatering performance, with respective reductions of 91.22% for SRF and 84.22% for CST, was attained under the following conditions: microwave power of 600 W, reaction time of 120s, and PAA dosage of 0.25g/g MLSS. Additionally, alterations in both sludge EPS composition and floc morphology pre- and post-MW-PAA treatment underwent examination. The findings demonstrate that microwaves additionally boost the breakdown of PAA into •OH radicals, suggesting a synergistic effect upon combining MW-PAA treatment. These pertinent research findings offer insights into employing MW-PAA technology for residual sludge treatment.

The dynamics of bacterial proliferation, viability, and extracellular polymeric substances in oral biofilm development

ObjectivesThis study investigated the relationship between bacterial growth, viability, and extracellular polymeric substances (EPS) formation in biofilms, particularly regarding resistance development. It also examined the impact of chemical factors on the EPS matrix and bacterial proliferation in oral biofilms. MethodsThree multi-species oral biofilms were incubated in anaerobic conditions. Three strains of Enterococcus faecalis were incubated in aerobic conditions. The incubation periods ranged from 0 h to 7 days for short-term biofilms, and from 3 to 90 days for long-term biofilms. Fluorescent labeling with carboxyfluorescein diacetate succinimidyl ester (CFSE) and flow cytometry were used to track EPS and bacterial growth. Confocal laser scanning microscopy (CLSM) assessed bacterial viability and EPS structure. Biofilms aged 7, 14, and 21 days were treated with 2 % chlorhexidine (CHX) and 1 % sodium hypochlorite (NaOCl) to evaluate their effects on EPS and bacterial proliferation. ResultsShort-term biofilms showed rapid bacterial proliferation and a gradual increase in EPS, maintaining stable viability. In the first two weeks, a significant rise in CFSE indicated growing maturity. From 14 to 90 days, EPS and CFSE levels stabilized. Following treatment, CHX significantly reduced bacterial proliferation, while NaOCl decreased EPS volume. ConclusionsBiofilm development involves a balance between bacterial proliferation and EPS production. The complexity of this process poses challenges in treating biofilm-associated infections, requiring strategies tailored to the biofilm's developmental stage. Clinical significanceFor effective root canal treatment, it is imperative to focus on reducing bacterial proliferation during the early stages of oral infections. In contrast, strategies aimed at minimizing EPS production could be more beneficial for long-term management of these conditions.

Regulation and role of extracellular polymeric substances in the defensive responses of Dictyosphaerium sp. to enrofloxacin stress

Algae are susceptible to enrofloxacin (ENR), an antibiotic frequently detected in aquatic environments. However, algal responses, especially the secretion and roles of extracellular polymeric substances (EPS), under ENR exposure remain unknown. This study is the first to elucidate the variation in algal EPS triggered by ENR at both the physiological and molecular levels. The results showed that EPS were significantly (P < 0.05) overproduced along with increased polysaccharide and protein contents in algae exposed to 0.05, 0.5, and 5 mg/L ENR. Secretion of aromatic proteins, especially tryptophan-like substances with more functional groups or aromatic rings, was specifically stimulated. Furthermore, the genes with upregulated expression related to carbon fixation, aromatic protein biosynthesis, and carbohydrate metabolism are direct causes of enhanced EPS secretion. Improved EPS levels increased the cell surface hydrophobicity and provided more adsorption sites for ENR, which strengthened the van der Waals interaction and reduced ENR internalization. The hormesis effects of ENR were alleviated, as illustrated by the less affected cell density, chlorophyll a/b, and carotenoids biosynthesis in algae with EPS. These findings demonstrate the involvement of EPS in algal ENR resistance and promote a deeper understanding of the ecological effects of ENR in aquatic environments.

Anomalous diffusion of nanoparticles in the spatially heterogeneous biofilm environment

Biofilms contain extracellular polymeric substances (EPS) that provide structural support and restrict penetration of antimicrobial treatment. To overcome limited penetration, functionalized nanoparticles (NPs) have been suggested as carriers for antimicrobial delivery. Using microscopy, we evaluate the diffusion of nanoparticles in function of the structure of Salmonella biofilms. We observe anomalous diffusion and heterogeneous mobility of NPs resulting in distinct NPs distribution that depended on biofilm structure. Through Brownian dynamics modeling with spatially varying viscosity around bacteria, we demonstrated that spatial gradients in diffusivity generate viscous sinks that trap NPs near bacteria. This model replicates the characteristic diffusion signature and vertical distribution of NPs in the biofilm. From a treatment perspective, our work indicates that both biofilm structure and the level of EPS can impact NP drug delivery, where low levels of EPS might benefit delivery by immobilizing NPs closer to bacteria and higher levels hamper delivery due to shielding effects.

Contrasting effects of phytoplankton aging on microplastic antibiotic adsorption depending on species tolerance, and biofouling level

Recent studies have reported conflicting results on the effects of biofouling on the adsorption behavior of microplastics (MPs). However, the underlying mechanisms driving the adsorption of MPs undergoing biofouling in aquatic environments remain unclear. This study examined the interactions between polyamide (PA), polyvinyl chloride (PVC) and polyethylene (PE) with two phytoplankton, namely cyanobacteria Microcystis aeruginosa and microalgae Chlorella vulgaris. Results indicated that MP effects on phytoplankton were dose- and crystalline-type dependent, with M. aeruginosa being more sensitive to MP exposure than C. vulgaris in the inhibitory order PA > PE > PVC. Analysis of antibiotic adsorption of the MPs showed significant contributions from CH/π interactions on PE and PVC and hydrogen bonding on PA, which decreased with phytoplankton biofouling and aging. Meanwhile, higher levels of extracellular polymeric substances on microalgae-aged MPs compared to cyanobacteria-aged MPs were conducive to adsorption of antibiotics, mainly through hydrophobic interactions. Overall, promotional and anti-promotional adsorption of antibiotics on MPs was induced by biofouling and aging of microalgae and cyanobacteria, respectively. This study provides deep insights into the specific mechanisms by which biofouling affects MP adsorption in aquatic environments, thus advancing our understanding of this critical environmental issue.

Characterization of benthic biofilms in mangrove sediments and their variation in response to nutrients and contaminants.

Diatom-dominated biofilms and associated extracellular polymeric substances (EPS) may adapt to the stress of long-term exposure to nutrients and anthropogenic contaminants. However, such interactions in contaminated mangrove sediments have rarely been reported. Based on the in situ characterization of biofilm components and environmental factors, the present study aimed to explore the key factors involved in shaping sediment biofilms through correlational and multivariate analyses. The pennate diatom Navicula is the core taxon that plays a crucial role in balancing the abundance of Nitzschia and Cyclotella, and is the main producer of bound-polysaccharides. The taxa composition shifts in a high N/P matrix, with the populations of pennate diatoms increasing but that of centric diatoms decreasing. High nutrient concentrations yield more number of diatoms and elevated levels of EPS. Bacteria are the main consumers of EPS and tend to be more symbiotic with Nitzschia than the other two diatom taxa. Some bound-polysaccharides dominated by arabinose and glucose units are transformed into the colloidal fraction, whereas other conservative ones serve as structural materials in concert with the bound-proteins. The planktonic phase of Cyclotella breaks down the structural EPS secreted by pennate diatoms in a process that directly affects the dynamic renewal of benthic biofilms. Most heavy metals as well as bisphenol A inhibit the abundance of bacteria and diatoms but enhance most EPS fractions except bound-polysaccharides. The response of structural EPS to specific contaminants varies, exhibiting increases in Co and Ni levels but decreases in nonylphenol and methylparaben levels. The present study improves our understanding of the microbial carbon loop of benthic biofilms in mangrove ecosystems under stress by nutrients and mixed contaminants.

Depiction of growth specific changes in concentration of storage products in centric marine diatom Chaetoceros gracilis

Chaetoceros, with >232 identified species is one of the largest genera of planktonic diatoms playing a pivotal role in aquatic ecosystem. Known for its high metabolite content and suitability as fish feed, C. gracilis, has been chosen for this study to comprehend the variation in carbon utilization and accumulation of reserve compounds at different growth stages of the alga. The uptake and influence of two discrete sources of silica on cellular growth and metabolite production was also analyzed. The result showed that the growth rate (0.27 d−1) and cell number (132 × 105 cells mL−1) of the cultures supplemented with nano-fabricated silica was higher than those with meta silicate. Concurrently both biomass and lipid productivity (0.082 and 0.043 g L−1 d−1) was also found to be higher in the former culture setup. The study further indicates both the extracellular polymeric substances (EPS), and storage lipid content was maximized during the late exponential and stationary phase. Though the bound EPS content was higher in the cultures supplemented with nano silica (0.095 g L−1), the level of unbound EPS and lipid % dry weight was higher in cultures with sodium meta silicate (1.33 g L−1 and 40.25%, respectively). Thus, the results provide evidence that how co-accumulation of metabolites are closely correlated to the growth cycle of diatoms and that commercial production of such highly valuable compounds can be achieved by targeting the specific growth phase even in outdoor setups.

Fate of intracellular, extracellular polymeric substances-associated, and cell-free antibiotic resistance genes in anaerobic digestion of thermally hydrolyzed sludge

Thermal hydrolysis of sludge is a promising approach to mitigate antibiotic resistance genes (ARGs) propagation in anaerobic digestion (AD). Although ARGs in sludge may be fractioned into intracellular, extracellular polymeric substance (EPS)-associated, and cell-free ARGs, the fate of these different fractions in AD has never been investigated. This study presents a detailed characterization of intracellular and extracellular ARGs in AD of sludge thermally hydrolyzed at 90 °C and 140 °C. EPS-associated ARGs represented the major fraction of the total extracellular ARGs in all samples, while its lowest abundance was observed for thermal hydrolysis at 140 °C along with the lowest EPS levels. The results suggested a positive correlation between EPS-associated ARGs with intracellular and cell-free ARGs. Furthermore, various EPS components, such as proteins and e-DNA, were positively correlated with β-lactam resistance genes. sul1 dominated all samples as an EPS-associated resistance gene. These results provide new insights into the significance of different ARGs fractions in their overall dissemination in AD integrated with thermal hydrolysis.

Functional analysis of extracellular polymeric substances (EPS) during the granulation of aerobic sludge: Relationship among EPS, granulation and nutrients removal

Extracellular polymeric substances (EPS) with high molecular weights, secreted from microorganisms, play a critical functional role in the aerobic granular sludge (AGS). To investigate the level and function of EPS during the granulation of aerobic sludge and in the mature AGS, a sequencing batch reactor (SBR) was operated for 70 days. Aerobic granules with an average diameter of 0.25 mm were obtained with reducing settling time of sludge. Simultaneous removals of COD, nitrogen and phosphorus by the mature AGS exceeded 90, 95 and 95%, respectively. The EPS content increased significantly to above 333 mg/g MLVSS during the initial stage, and after that, it stabilized at about 240 mg/g MLVSS as the mature AGS formed, higher than that of the seed sludge (212 mg/g MLVSS). The increased EPS contents showed a negative correlation with SVI values, while a strong positive relationship with the formation of the AGS. The protein/polysaccharide (PN/PS) ratio in the EPS increased from 1.42 to 4.17, and TP/MLSS increased to about 6%, with the formation of AGS. The proportion of extracellular-P increased with the increase of EPS, and then maintained stable at about 20%, indicating EPS promoted the removal of phosphorus. Furthermore, the results from the Standards, Measurements and Testing (SMT) and X-Ray Diffraction (XRD) showed that phosphorus in the AGS mainly existed in the form of inorganic phosphorus (IP) and the proportion of Ca5(PO4)3(OH) in IP was up to 92%. This investigation demonstrated that EPS had a positive relationship with the sludge granulation and nutrients removal.

Candidatus Kaistella beijingensis sp. nov., Isolated from a Municipal Wastewater Treatment Plant, Is Involved in Sludge Foaming.

Biological foaming (or biofoaming) is a frequently occurring problem in wastewater treatment plants (WWTPs) and is attributed to the overwhelming growth of filamentous bulking and foaming bacteria (BFB). Biological foaming has been intensively investigated, with BFB like Microthrix and Skermania having been identified from WWTPs and implicated in foaming. Nevertheless, studies are still needed to improve our understanding of the microbial diversity of WWTP biofoams and how microbial activities contribute to foaming. In this study, sludge foaming at the Qinghe WWTP of China was monitored, and sludge foams were investigated using culture-dependent and culture-independent microbiological methods. The foam microbiomes exhibited high abundances of Skermania, Mycobacterium, Flavobacteriales, and Kaistella. A previously unknown bacterium, Candidatus Kaistella beijingensis, was cultivated from foams, its genome was sequenced, and it was phenotypically characterized. Ca. K. beijingensis exhibits hydrophobic cell surfaces, produces extracellular polymeric substances (EPS), and metabolizes lipids. Ca. K. beijingensis abundances were proportional to EPS levels in foams. Several proteins encoded by the Ca. K. beijingensis genome were identified from EPS that was extracted from sludge foams. Ca. K. beijingensis populations accounted for 4 to 6% of the total bacterial populations in sludge foam samples within the Qinghe WWTP, although their abundances were higher in spring than in other seasons. Cooccurrence analysis indicated that Ca. K. beijingensis was not a core node among the WWTP community network, but its abundances were negatively correlated with those of the well-studied BFB Skermania piniformis among cross-season Qinghe WWTP communities. IMPORTANCE Biological foaming, also known as scumming, is a sludge separation problem that has become the subject of major concern for long-term stable activated sludge operation in decades. Biological foaming was considered induced by foaming bacteria. However, the occurrence and deterioration of foaming in many WWTPs are still not completely understood. Cultivation and characterization of the enriched bacteria in foaming are critical to understand their genetic, physiological, phylogenetic, and ecological traits, as well as to improve the understanding of their relationships with foaming and performance of WWTPs.

Spatio-temporal modeling of the crowding conditions and metabolic variability in microbial communities.

The metabolic capabilities of the species and the local environment shape the microbial interactions in a community either through the exchange of metabolic products or the competition for the resources. Cells are often arranged in close proximity to each other, creating a crowded environment that unevenly reduce the diffusion of nutrients. Herein, we investigated how the crowding conditions and metabolic variability among cells shape the dynamics of microbial communities. For this, we developed CROMICS, a spatio-temporal framework that combines techniques such as individual-based modeling, scaled particle theory, and thermodynamic flux analysis to explicitly incorporate the cell metabolism and the impact of the presence of macromolecular components on the nutrients diffusion. This framework was used to study two archetypical microbial communities (i) Escherichia coli and Salmonella enterica that cooperate with each other by exchanging metabolites, and (ii) two E. coli with different production level of extracellular polymeric substances (EPS) that compete for the same nutrients. In the mutualistic community, our results demonstrate that crowding enhanced the fitness of cooperative mutants by reducing the leakage of metabolites from the region where they are produced, avoiding the resource competition with non-cooperative cells. Moreover, we also show that E. coli EPS-secreting mutants won the competition against the non-secreting cells by creating less dense structures (i.e. increasing the spacing among the cells) that allow mutants to expand and reach regions closer to the nutrient supply point. A modest enhancement of the relative fitness of EPS-secreting cells over the non-secreting ones were found when the crowding effect was taken into account in the simulations. The emergence of cell-cell interactions and the intracellular conflicts arising from the trade-off between growth and the secretion of metabolites or EPS could provide a local competitive advantage to one species, either by supplying more cross-feeding metabolites or by creating a less dense neighborhood.

Comparison of mesophilic and thermophilic dark fermentation with nickel ferrite nanoparticles supplementation for biohydrogen production

In this work, nickel ferrite nanoparticles (NiFe2O4 NPs) was prepared to improve hydrogen (H2) production by dark fermentation. Moderate amounts (50–200 mg/L) promoted H2 generation, while excess NiFe2O4 NPs (over 400 mg/L) lowered H2 productivity. The highest H2 yields of 222 and 130 mL/g glucose were obtained in the 100 mg/L (37 °C) and 200 mg/L NiFe2O4 NPs (55 °C) groups, respectively, and the values were 38.6% and 28.3% higher than those in the control groups (37 °C and 55 °C). Soluble metabolites showed that NiFe2O4 NPs enhanced the butyrate pathway, corresponding to the increased abundance of Clostridium butyricum in mesophilic fermentation. The endocytosis of NiFe2O4 NPs indicated that the released iron and nickel favored ferredoxin and hydrogenase synthesis and activity and that NiFe2O4 NPs could act as carriers in intracellular electron transfer. The NPs also optimized microbial community structure and increased the levels of extracellular polymeric substances, leading to increased H2 production.

Sorption and transformation of arsenic by extracellular polymeric substances extracted from Synechocystis sp. PCC6803

Cyanobacteria widely distribute in the aqueous ecosystem and produce abundant extracellular polymeric substances (EPS), yet little is known about how the quantity and composition of cyanobacterial EPS change upon As exposure, and what are functions of these complex biopolymers in the As sorption and transformation processes. Here we extracted the EPS from Synechocystis sp. PCC6803, characterized their properties, quantified their components upon exposure to arsenite (As(III))/arsenate (As(V)) treatments, and investigated As binding and speciation as affected by the levels of EPS and solution pH. The total binding sites, zeta potential and reducing power of EPS were 17.47 mmol g−1, -19.72 mV and 1.71. The amounts of EPS increased by 22–65.3% and 13.8–39% when the cells were treated with 10–500 μM As(III) and As(V) respectively. The As removal was influenced by the EPS doses and solution pH, with 52.8% at pH 8.5 for As(III) and 49.5% at pH 4.5 for As(V) at 300 mg L−1 EPS. In addition, As speciation was transformed with the addition of EPS. As(V) and As(III) respectively accounted for 4.9–20.3% and 6.5–26.7% of the total dissolved As after the EPS were added (100–300 mg L−1) to the As(III) and As(V) solutions. Fourier transform infrared spectroscopy (FTIR) and three-dimensional excitation-emission fluorescence spectra (3D-EEM) revealed that As was bound to functional groups such as C═O, ─NH, and ─OH in the EPS via surface complexation/hydrophobic interactions. Taken together, this study demonstrated that the EPS extracted from Synechocystis were capable to bind and transform As and could be potentially applied to remove or detoxify As in solutions.

Performance, kinetics characteristics and enhancement mechanisms in anammox process under Fe(II) enhanced conditions.

In order to explore the performance, kinetics characteristics and enhancement mechanisms in anammox process under ferrous iron enhanced conditions, a laboratory-scale UASB anammox reactor has been built up and operated for 534days. Experimental results showed that the Anammox process was successfully started up in a short operation period and the TNRE reached 83.34 ± 2.96% with a maximum total nitrogen removal rate of 14.4kgm-3 d-1 after long-term operated under influent Fe(II) concentration of 5.3mgL-1. Simulation results using different kinetic models showed that the Stover-Kincannon model and the Grau second-order model were useful for describing the anammox performance under Fe(II) enhanced conditions. Extracellular polymeric substance (EPS) act a pivotal part in the granulation of Anammox sludge and the improvement of anammox activity. Iron improved the hydrophobicity of the sludge by reducing the PN/PS ratios, and also increased the Anammox granular diameter. The granular diameter of higher than 2.00 accounted for 58.3% of the total sludge. At the same time, the presence of iron decreased EPS levels, and also decreased the iron adsorption ability to sludge. More iron was transported into Anammox, which improved the nitrogen removal ability in the Anammox reactor.

Viscosity dynamics and the production of extracellular polymeric substances and soluble microbial products during anaerobic digestion of pulp and paper mill wastewater sludges

The production processes of the pulp and paper industry often run in campaigns, leading to large variations in the composition of wastewaters and waste sludges. During anaerobic digestion (AD) of these wastes, the viscosity or the production of extracellular polymeric substances (EPS) and soluble microbial products (SMP) may be affected, with the risk of foam formation, inefficient digester mixing or poor sludge dewaterability. The aim of this study was to investigate how viscosity and production of EPS and SMP during long-term AD of pulp and paper mill sludge is affected by changes in organic loading rate (OLR) and hydraulic retention time (HRT). Two mesophilic lab-scale continuous stirred tank reactors (CSTRs) were operated for 800 days (R1 and R2), initially digesting only fibre sludge, then co-digesting fibre sludge and activated sludge. The HRT was lowered, followed by an increase in the OLR. Reactor fluids were sampled once a month for rheological characterization and analysis of EPS and SMP. The production of the protein fraction of SMP was positively correlated to the OLR, implicating reduced effluent qualities at high OLR. EPS formation correlated with the magnesium content, and during sulphate deficiency, the production of EPS and SMP increased. At high levels of EPS and SMP, there was an increase in viscosity of the anaerobic sludges, and dewatering efficiency was reduced. In addition, increased viscosity and/or the production of EPS and SMP were important factors in sludge bulking and foam formation in the CSTRs. Sludge bulking was avoided by more frequent stirring.

Effect of Increased Influent COD on Relieving the Toxicity of CeO2 NPs on Aerobic Granular Sludge.

Due to the increased use of cerium oxide nanoparticles (CeO2 NPs), their potential environmental risks have caused concern. However, their effects on the aerobic granular sludge (AGS) process and the later recovery of AGS are still unclear. In this study, we comprehensively determined the changes in pollutant removal and the levels of extracellular polymeric substances (EPS) in AGS that were exposed to CeO2 NP treatments (0 (the control, R0), 1 (R1), and 5 (R5) mg/L), following an increase in the influent chemical oxygen demand (COD). An increase in the CeO2 NP concentration enhanced their inhibitory effect on the removal of total nitrogen (TN) and total phosphorus (TP), and promoted the production of polysaccharides (PS) and proteins (PN) in loosely bound EPS (LB-EPS) or tightly bound EPS (TB-EPS), as well as the dissolved organic carbon (DOC) components in EPS, but had no long-term effects on the removal of organic matter. When the addition of CeO2 NPs was stopped and the concentration of influent COD increased, the TN and TP removal efficiencies in R1 and R5 slowly increased and recovered. In R1, they were only 4.55 ± 0.55% and 2.71 ± 0.58% lower than in R0, respectively, while the corresponding values for R5 were 5.06 ± 0.46% and 6.20 ± 0.63%. Despite the LB-EPS and TB-EPS concentrations in the R1 and R5 treatments recovering and being similar to the levels in the control when no CeO2 NPs were added, they were still slightly higher than in the R0, which indicating that the negative effects of CeO2 NPs could not be completely eliminated due to the residual CeO2 NP levels in AGS.

Characterization of activated sludge flocs in membrane bioreactor: stable and unstable flocs.

In this study, the properties of unstable and stable flocs were investigated under the steady operation of a membrane bioreactor (MBR). The extracellular polymeric substances (EPS) composition, surface charge, and hydrophobicity of unstable and stable flocs were examined and compared. Interfacial interactions of the membrane with unstable flocs, unstable flocs themselves, and unstable and stable flocs were assessed using the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) models. Cake layer resistance was found to contribute more than 80% of total resistance under steady operating conditions. Compared with stable flocs, unstable flocs possessed a higher level of EPS, more diverse protein, more negative charge, weaker hydrophobicity, and higher fouling potential. Thermodynamic analyses showed that unstable flocs had a higher adhesive strength (- 63.4mJ/m2) with the membrane, lower self-cohesive strength (- 18.3mJ/m2), and higher cohesive strength (- 54.3mJ/m2) with stable flocs. Therefore, some unstable flocs remained on the membrane surface to form the cake layer due to their poor cohesion strength.

Isolation, characterization and optimization of EPSs produced by a cold-adaptedMarinobacterisolate from Antarctic seawater

AbstractMarinobactersp. W1-16 from Antarctic surface seawater was analysed for the production of extracellular polymeric substances (EPSs). Enhancement of the EPS biosynthesis was carried out by evaluating the influences of the carbon source (type and concentration), temperature, pH and salinity. EPS yields varied strongly depending on sugar substrate and temperature, while pH and salinity did not strongly affect levels of EPS production.Marinobactersp. W1-16 produced the highest quantity of EPSs when growing at 15°C and pH 8, in the presence of 2% glucose and 3% NaCl. The EPS chemical characterization revealed a molecular weight of about 260 kDa. Colorimetric assays determined a higher quantity of carbohydrate than of proteins and uronic acids, as well as the presence of sulphate, in the extracted EPSs. The monosaccharidic composition resulted in Glc:Man:Gal:GalN:GalA:GlcA in relative molar proportions of 1:0.9:0.2:0.1:0.1:0.01. Some biotechnological potentialities (i.e. emulsifying and cryoprotective actions, and heavy metal binding properties) of the EPSs were proved, suggesting possible industrial and bioremediation applications.

Bio-hydrometallurgy dynamics of copper sulfide-minerals probed by micro-FTIR mapping and Raman microspectroscopy

We report the μm-FTIR mapping and Raman microspectroscopic detection of bornite [Cu5FeS4]-, chalcocite [Cu2S]-, and covelitte [CuS]- bacterial interactions by a consortium of microorganisms consisted of Acidithiobacillus ferrooxidans, Acidithiobacillus thiooxidans, Acidithiobacillus caldus, Leptospirillum ferriphilum, Leptospirillum ferroodiazotrophum and Sulfobacillus thermosulfidooxidans. The absorption signals of amide I, K+-jarosite [KFe3(SO4)2(OH)6] and of the produced extracellular polymeric substances (EPS) from the mixed culture as a function of position on the surfaces of the bioleached bornite, chalcocite and covellite demonstrated their heterogeneity within the surface of the minerals. This reveals the high level of biofilm, EPS, and jarosite biosynthesis on the surface of the minerals and might explain why they associate. To our knowledge this is the first combined application of μm-FTIR mapping and Raman microspectroscopy for the bioleaching behaviour of bornite, chalcocite and covellite and the comparison with other bioleached systems such as chalcopyrite [CuFeS2] provides valuable information on the whole bio-hydrometallurgy Cu/Fe/S system. Both techniques provide spectrally rich, label-free, nondestructive visualizations of the bio-hydrometallurgy dynamics of copper sulfide minerals for processing and storage of large spectral data sets which are valuable for evaluation of copper containing minerals.

A highly efficient conditioning process to improve sludge dewaterability by combining calcium hypochlorite oxidation, ferric coagulant re-flocculation, and walnut shell skeleton construction

High levels of extracellular polymeric substances (EPS) and bound water in sludge negatively impact sludge dewaterability. This study applied a novel sludge conditioning process involving calcium hypochlorite (Ca(ClO)2) oxidation, ferric coagulant re-flocculation, and walnut shell (WS) skeleton construction to remove EPS and bound water and improve sludge dewaterability. The study also described the underlying mechanisms for this activity, by investigating the changes in EPS distribution, morphological structure, flocs morphology, rheological behavior, and bound water. Using single factor experiments, the optimal dosages of the composite conditioner included 10 mg/g dry solid (DS) of Ca(ClO)2, 60 mg/g DS of ferric chloride (FeCl3) or 100 mg/g DS of polymeric ferric sulfate (PFS), and 600 mg/g DS of WS. Using a novel pressure filtration system, the moisture content of the dewatered sludge cake conditioned with Ca(ClO)2/ferric coagulant/WS was reduced to below 50 wt%. The study described a three-step mechanism for the composite conditioning of sludge. First, protein-like substances and polysaccharide-like materials in the EPS and bound water were degraded by Ca(ClO)2 oxidation. Second, the porous structure and compact flocs were re-flocculated using high charge neutralization and the bridging ability of ferric coagulant. The flowability increased and the viscosity decreased compared with raw sludge. Third, a rigid networked structure was formed by adding the WS skeleton. The combined Ca(ClO)2/ferric coagulant/WS treatment had a significant synergistic effect supporting dewatering. The filter liquor of the combined treatment has a lower impact on the environment. The combined treatment is an appropriate was to treat sludge prior to landfilling and incineration. Furthermore, the economic analysis showed that using the Ca(ClO)2/FeCl3/WS treatment had economic advantages over other treatments.