Abstract

The production processes of the pulp and paper industry often run in campaigns, leading to large variations in the composition of wastewaters and waste sludges. During anaerobic digestion (AD) of these wastes, the viscosity or the production of extracellular polymeric substances (EPS) and soluble microbial products (SMP) may be affected, with the risk of foam formation, inefficient digester mixing or poor sludge dewaterability. The aim of this study was to investigate how viscosity and production of EPS and SMP during long-term AD of pulp and paper mill sludge is affected by changes in organic loading rate (OLR) and hydraulic retention time (HRT). Two mesophilic lab-scale continuous stirred tank reactors (CSTRs) were operated for 800 days (R1 and R2), initially digesting only fibre sludge, then co-digesting fibre sludge and activated sludge. The HRT was lowered, followed by an increase in the OLR. Reactor fluids were sampled once a month for rheological characterization and analysis of EPS and SMP. The production of the protein fraction of SMP was positively correlated to the OLR, implicating reduced effluent qualities at high OLR. EPS formation correlated with the magnesium content, and during sulphate deficiency, the production of EPS and SMP increased. At high levels of EPS and SMP, there was an increase in viscosity of the anaerobic sludges, and dewatering efficiency was reduced. In addition, increased viscosity and/or the production of EPS and SMP were important factors in sludge bulking and foam formation in the CSTRs. Sludge bulking was avoided by more frequent stirring.

Highlights

  • Rheological properties of sludge affect several important parameters in waste treatment processes, such as pumping, mixing and sludge dewatering [1, 2]

  • Of all the investigated parameters, only the production of SMPp was significantly correlated to organic loading rate (OLR) (Table 1, Fig. 1a, b)

  • Our study showed that the production of extracellular polymeric substances (EPS) and soluble microbial products (SMP) and apparent viscosity varied during long-term anaerobic digestion (AD) of pulp and paper mill sludge

Read more

Summary

Introduction

Rheological properties of sludge (e.g., viscosity) affect several important parameters in waste treatment processes, such as pumping, mixing and sludge dewatering [1, 2]. Increased viscosity during anaerobic digestion (AD) may negatively affect mixing efficiency, leading to dead zones and decreased process performance [3]. Most research on the factors affecting sludge rheology so far addressed activated sludge, primarily showing.

Objectives
Methods
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.