Layer Technique Research Articles

An Overview: Effect of Plant Growth Regulatory on Orchid Propagation through The Thin Cell Layer technique

Thin cell layer (TCL) is a micropropagation method using thin-sized explants. A TCL can be prepared from any explant source and the thichness of explant less than 5 mm. TCL is more efficient in producing total plantlet output than conventional in vitro methods. TCL have been applied to the in vitro culture of orchids, field, vegetable crops and medicinal plants The successful in vitro orchid propagation is influenced by many factors, such as plant genotype and media composition. Additions of plant growth regulator (PGR) in media culture is essential factor. The formation of complete plant depent on concentration and type of plant growth regulator. TCL explants require growth regulators to form an embryonic callus and zygotic embryos. Explant in medium without supplemented of growth regulators resulted in browning and failed to grow. The most commonly plant growth regulator in tissue culture are thidiazuron (TDZ), 6-benzylaminopurine (BAP) 2,4 dichlorophenoxyacetic acid (2,4-D), α-naphthaleneacetic acid (NAA), and meta-Topolin. Recently, microalgae can also be used as an alternative source of hormones to increase plant growth through in vitro culture techniques

Enhancing HTTP Web Protocol Performance with Updated Transport Layer Techniques

Popular Internet applications such as web browsing, and web video download use HTTP protocol as application over the standard Transport Control Protocol (TCP). Traditional TCP behavior is unsuitable for this style of application because their transmission rate and traffic pattern are different from conventional bulk transfer applications. Previous works have analyzed the interaction of these applications with the congestion control algorithms in TCP and the proposed Congestion Window Validation (CWV) as a solution. However, this method was incomplete and has been shown to present drawbacks. This paper focuses on the ‘newCWV’ which was designed to address these drawbacks. NewCWV provides a practical mechanism to estimate the available path capacity and suggests a more appropriate congestion control behavior. This paper describes how this algorithm was implemented in the Linux TCP/IP stack and tested by experiments, where results indicate that, with newCWV, the browsing can get 50% faster in an uncongested network.

Electrochromic Properties of Sol-Gel Deposited Electrochromic TiO2 Thin Films

Electrochromic (EC) smart windows are a type of glass window that can change from transparent to darker colour shades when a small voltage is applied. Titanium dioxide (TiO2) can be utilised as an EC material for EC smart windows. Although the TiO2 sol-gel spin-coating method is commonly used, the effect of the number of TiO2 layers was not reported. Thus, this paper investigates the effect of the number of TiO2 layers. The increasing number of TiO2 film layers demonstrated a noticeable increase in the thin films ‘anodic and cathodic diffusion coefficient, particularly with 11 TiO2 layers. Additionally, the colouration and bleaching time was revealed to have a low correlation as the number of layers increased. Nonetheless, the lower number of TiO2 layers resulted in lower colouring transmittance. Comparatively, the colouration efficiency for all films did not exhibit any significant change. Hence this study on the effect of the TiO2 layering technique can open a new pathway in understanding the EC properties of TiO2-based EC devices.

Layering Technique of Resin Composite Method for Direct Anterior Teeth Restorations: A New Appraisal

Introduction: Composite resins can be effectively recycled to progress the patient's esthetics concluded minimally invasive, low cost and high clinical presentation managements. The layering techniques of composite resins in different thicknesses, with varying grades of opacity and translucency, permit to create esthetic restorations with dental structures physical appearance. Aim: The intention of the training was to appraise the characteristics, values and approaches of stratification of resins composite materials and to demonstrate these approaches with clinical cases. Materials and method: An electronic search of scientific articles referring to the stratification of composite materials was done using a single medical database. The attention on the choice of keywords as well as the presence and elimination criteria were the directorial elements of the research. All articles were included after the title, the abstract and finally, the full text was checked. Only relevant research has been reviewed. Based on the results, several methods of stratifications have been used in clinical practice. Results and discussion: The concept of natural stratification, anatomical stratification, the stratification of the anterior teeth using a dentine hue and a predefined thickness of enamel, or a single layer of material and the correct placement of pigments and opacities, lead to the achievement of esthetic and predictable direct restorations of nanocomposite resins. Conclusions: Within the limit of this study, it is concluded that, to achieve aesthetic excellence, dentists should understand and apply artistic and scientific principles when layering materials, respecting the optical properties of natural dental structures.

The clinical performance of bulk-fill versus the incremental layered application of direct resin composite restorations: a systematic review

ObjectivesTo systematically review the scientific evidence comparing the clinical effectiveness of bulk-fill versus incrementally layered conventional resin composites and to evaluate if one method offers clear merits with specific clinical outcomes.Materials and methodsUsing relevant mesh terms and pre-established eligibility criteria in PubMed, Embase, Scopus and Web of Science, a thorough scientific search was conducted with an end-date of 30.04.2023. Randomized controlled clinical trials that involved the direct comparison of Class I and Class II resin composite restorations applied using incremental layering techniques versus bulk-filled in permanent teeth with an observation period of at least six months were considered. To evaluate the bias risk of the finalized records, a revised version of the Cochrane risk-of-bias tool for randomized trials was implemented.ResultsOut of the 1445 records determined, 18 eligible reports were chosen for qualitative analysis. Data obtained was categorized as per, the cavity design, the intervention, the comparator(s), the methods of success/failure assessment, the outcomes, and follow-up. Two studies demonstrated an overall low-risk of bias, fourteen studies raised some concerns, and two studies exhibited high-risk.ConclusionBulk filled resin composite restorations demonstrated clinical outcomes similar to those of incrementally layered resin composite restorations within a review interval of 6 months to 10 years.

Double-pole unsplit complex-frequency-shifted multiaxial perfectly matched layer combined with strong-stability-preserved Runge-Kutta time discretization for seismic wave equation based on the discontinuous Galerkin method

The classical complex-frequency-shifted perfectly matched layer (CFS-PML) technique has attracted widespread attention for seismic wave simulations. However, few studies have addressed the double-pole variant of the CFS-PML scheme. The double-pole CFS-PML has a stronger capacity to absorb near-grazing incident waves and evanescent waves than the classical CFS-PML. Using the discontinuous Galerkin (DG) method, we derive a double-pole unsplit auxiliary ordinary differential equation CFS-multiaxial PML (AODE CFS-MPML) formulation, which combines a fourth-order strong-stability-preserved Runge-Kutta time discretization for wavefield simulation on an unstructured grid. The double-pole unsplit CFS-MPML formulations are obtained by introducing auxiliary memory variables and AODEs. The original stress-velocity equations and the double-pole unsplit AODE CFS-MPML equations are all first-order hyperbolic systems and suitable for the DG method. The attenuative variables are added directly to the original seismic wave equations without changing their formats. In contrast to the split perfectly matched layer (PML), we avoid reformulating PML equations in the nonattenuative modeling region. The original seismic wave equation is solved in the nonattenuative modeling domain, whereas the double-pole unsplit AODE CFS-MPML equation is implemented in the PML absorbing region. Three numerical examples validate the performance of the double-pole unsplit AODE CFS-MPML technique. The isotropic and anisotropic experiments demonstrate that our developed double-pole unsplit AODE CFS-MPML is more stable and obtains more accurate solutions than the classical CFS-PML. The second example indicates the flexibility of the combination of the DG method with the double-pole CFS-MPML on undulating topography. The final example displays the applicability and effectiveness of our method in a 3D situation.

Discontinuous Speed Control of PMDC Motors with Chattering Attenuation

In most applications, electric drives are actuated using on/off devices due to their low cost and also due to the relatively high power consumption of the electric drives which make applying linear power amplifiers very costly. In this paper, the operation of PMDC motors under discontinuous control action is analyzed. In addition, to reduce chattering, boundary layer solution has been addressed. Both suggested control techniques have been applied to a PMDC motor model in a software simulation using MATLAB. The results show better performance of boundary layer technique due to the reduced chattering. Index Terms— PMDC Motor, Discontinuous Control, Boundary Layer.

An Injection Layering Technique of Bonded Provisional Veneers at the Early-stage Crown Lengthening: A Case Report

An Injection Layering Technique of Bonded Provisional Veneers at the Early-stage Crown Lengthening: A Case Report

An arbitrary Lagrangian–Eulerian method for analyzing finite-amplitude viscous acoustic waves radiated from vibrational solid boundaries: An implicit method

This paper is concerned with the development of an arbitrary Lagrangian–Eulerian (ALE) method for predicting nonlinear acoustic waves radiated from large-amplitude vibrational solid boundaries immersed in viscous fluids of infinite extent. The method is formulated based on a nonlinear acoustic model characterized by velocity potential and acoustic pressure. Unsplit implementations of three perfectly matched layer (PML) techniques are presented, namely conventional PML, convolution PML, and complex frequency-shifted PML (CFS-PML), to enable bounded-domain modeling of nonlinear acoustic waves propagating in an unbounded fluid medium. The long-time stability characteristics of the three distinct PML techniques are examined through theoretical analysis and numerical verification of their ability to absorb evanescent waves. Our results reveal that the CFS-PML technique exhibits superior long-time stability performance compared to the other two techniques. The CFS-PML is also compared to two different absorbing layer techniques: the Kosloff Absorbing Layer (KAL) technique and the Acoustic Black Hole (ABH) technique. The finite element method is adopted for spatial discretization of the finite-amplitude acoustic wave model, and an implicit predictor–corrector algorithm is proposed for time advancement. Several benchmark problems, including acoustic waves produced by a vibrational piston, and transversely oscillating and pulsating cylinders, are analyzed by the proposed method. It is found that the proposed method attains a second-order rate of convergence for spatial discretization, and the convergence rate in terms of the time step size is about first-order. The application of the method to acoustic levitation problems is also demonstrated, and the nonlinear phenomenon of acoustic waves in a single-axis acoustic levitator is discussed.

Effects of seasons and indole-3-buteric acid doses on the propagation of some native rhododendron species by air layering technique in their natural habitats

This research was conducted to determine to the effects of indole-3-butyric acid (IBA) doses and propagation season on rooting rates and some root parameters of Rhododendron species, R. ponticum L., R. luteum Sweet, R. ungernii Trautv, and R. caucasicum Pallas. Air layering technique and IBA doses (0, 500 ppm, and 1,500 ppm) were applied to each Rhododendron species in their natural habitat in autumn and spring. In the present investigation, dry root weight (mg), root length (cm), root volume (cm3), and root diameter (mm) were investigated as root quality parameters. The highest rooting efficiency (100%) was obtained from R. caucasicum and R. ungernii species. The rooting efficiencies of R. ponticum (between 6.67% to 66.67%) and R. luteum (between 0% to 53.33%) species were lower than the other two species. The heaviest dry root (266.10 mg), the largest root volume (1.49 cm3), and the thickest root diameter (0.05 cm) were obtained in autumn and 1,500 ppm IBA dose from R. caucasicum species. The longest roots, 349.21 cm, were formed in the R. ungernii species in the spring, during the air layering, in which 500 ppm IBA dose was applied.

Formulation and Evaluation of Double-layered (Matrix and Drug-in-adhesive) Transdermal Patches of Diclofenac Diethylamine: In vitro and ex vivo Permeation Studies

Abstract: Background: The objective of this current study was to fabricate and characterize the sustained release double layered transdermal patches of Diclofenac Diethylamine using hydrophobic acrylic polymer Eudragit RL 100 and hydrophilic polymer Polyvinyl pyrrolidone K-30 in combination as first layer of matrix type patch and pressure sensitive acrylic adhesive Duro Tak 387- 2510 as the second layer of drug-in-adhesive type patch to provide sustained anti-inflammatory effect. Materials and Methods: Solvent casting method was employed to prepare patch over the backing membrane. The double layered technique were attempted to create the desirable features of acrylic polymer and adhesive. The drug-polymers compatibility studies were examined by Infrared spectroscopy. A full-thickness excised abdominal rat skin sample was used to perform the permeation studies using Franz’s Diffusion Cell. Results: Drug-polymers compatibility studies revealed no evidence of interaction and the formulations showed satisfactory physicochemical-mechanical characteristics. It was found that release profiles were affected by the proportion of polymer and permeation enhancer used. The optimized formulation MF3 showed maximum in vitro and ex vivo percent cumulative drug permeated i.e. 87.28 ± 3.88% and 81.95 ± 2.64% respectively, with flux 12.96 ± 0.51 μg/ cm2/h and permeability coefficient 1.09 ± 0.45 cm/h, in 24 hr. Also, the permeation studies suggested that dimethyl sulphoxide exhibit more promising results as permeation enhancer. Conclusion: It was concluded that an ideal Diclofenac Diethylamine double layered transdermal patch would serve as the best carrier to provide sustained effect with desirable permeation enhancement characteristics. Keywords: Transdermal patches, Double layered technique, Hydrophobic acrylic polymer, Hydrophilic polymer, Permeation enhancer, Anti-inflammatory.

Evaluation of Left Ventricular Systolic Function Using Layer-Specific Strain in Rats Performing Endurance Exercise: A Pilot Study.

The functional characteristics of exercise-induced myocardial hypertrophy were studied in a rat model in conjunction with ultrasound layered strain technique to investigate the hidden changes in the heart brought about by exercise. Forty specific pathogen free (SPF) adult Sprague-Dawley rats were selected and randomly divided into two groups of 20 exercise and 20 control rats. The longitudinal and circumferential strain parameters were measured using the ultrasonic stratified strain technique. The differences between the two groups and the predictive effect of stratified strain parameters on left ventricular systolic function were analyzed. The exercise group had significantly higher global endocardial myocardial longitudinal strain (GLSendo), global mid-myocardial global longitudinal strain (GLSmid) and global endocardial myocardial global longitudinal strain (GCSendo) values than the control group (p < 0.05). Even though global mid-myocardial circumferential strain (GCSmid) and global epicardial myocardial circumferential strain (GCSepi) were higher in the exercise group than in the control group, statistical significance was not reached (p > 0.05). Conventional echocardiography parameters were well correlated with GLSendo, GLSmid, and GCSendo (p < 0.05). GLSendo was the best predictor of left ventricular myocardial contractile performance in athletes determined using the receiver operating characteristic curve, with an area under the curve of 0.97, sensitivity of 95% and specificity of 90%. Rats performing endurance exercise exhibited subclinical changes in the heart after prolonged high-intensity exercise. A stratified strain parameter, GLSendo, played an important role in the evaluation of LV systolic performance in exercising rats.

A spectrally discretized wide-angle parabolic equation model for simulating acoustic propagation in laterally inhomogeneous oceans.

Sound waves can be used to carry out underwater activities. Rapidly and accurately simulating sound propagation is the basis for underwater detection. The wide-angle parabolic model has a good computational speed and accuracy and is currently the main numerical model for mid- and low-frequency sound propagation. The classical wide-angle parabolic equation model is discretized by the finite difference method and a low-order difference scheme is generally adopted. In this paper, a wide-angle parabolic equation model based on a spectral method is proposed. The depth operators of each layer are discretized via the Chebyshev spectral method and then assembled into a global matrix for the forward step. Lateral inhomogeneity is addressed by updating the global depth matrix while stepping forward. In the proposed spectral algorithm, both soft and hard seabeds can be accurately simulated by imposing boundary conditions, and the perfectly matched layer technique is used to truncate the unbounded acoustic half-space. Several representative numerical experiments prove the accuracy and efficiency of the proposed algorithm. However, the spectral method requires that the thickness of the layers does not change during the forward step. Thus, the current spectral algorithm cannot simulate waveguides with terrain undulation, which is its main limitation.

FCMCPS-COVID: AI propelled fog–cloud inspired scalable medical cyber-physical system, specific to coronavirus disease

Medical cyber–physical systems (MCPS) firmly integrate a network of medical objects. These systems are highly efficacious and have been progressively used in the Healthcare 4.0 to achieve continuous high-quality services. Healthcare 4.0 encompasses numerous emerging technologies and their applications have been realized in the monitoring of a variety of virus outbreaks. As a growing healthcare trend, coronavirus disease (COVID-19) can be cured and its spread can be prevented using MCPS. This virus spreads from human to human and can have devastating consequences. Moreover, with the alarmingly rising death rate and new cases across the world, there is an urgent need for continuous identification and screening of infected patients to mitigate their spread. Motivated by the facts, we propose a framework for early detection, prevention, and control of the COVID-19 outbreak by using novel Industry 5.0 technologies. The proposed framework uses a dimensionality reduction technique in the fog layer, allowing high-quality data to be used for classification purposes. The fog layer also uses the ensemble learning-based data classification technique for the detection of COVID-19 patients based on the symptomatic dataset. In addition, in the cloud layer, social network analysis (SNA) has been performed to control the spread of COVID-19. The experimental results reveal that compared with state-of-the-art methods, the proposed framework achieves better results in terms of accuracy (82.28 %), specificity (91.42 %), sensitivity (90 %) and stability with effective response time. Furthermore, the utilization of CVI-based alert generation at the fog layer improves the novelty aspects of the proposed system.

Soft Tissue Dissection in the Transcondylar Approach: A Modified Layered Technique to Maximize Lateral Access.

Objective While the transcondylar approach is technically challenging, it provides generous ventral and caudal exposure to the craniovertebral junction. This approach requires navigation around multiple eloquent neurovascular structures including the lower cranial nerves, vertebral artery and its branches, and the brainstem. Superficial exposure, including incision location and muscle dissection, can dramatically affect the surgical angle and maneuverability at depth. Methods We demonstrate the transcondylar approach in a step-by-step fashion in a formalin-embalmed, latex-injected cadaver head. Dissection within each layer of the suboccipital muscles was performed. A small cohort with an illustrative case is also included herein. Results The sternocleidomastoid (SCM) muscle was retracted anteriorly; the splenium capitis, semispinalis capitis, and longissimus capitis muscles were disconnected from the superior nuchal line and reflected inferomedially. The suboccipital muscle group was fully exposed. The superior and inferior oblique muscles were disconnected from the transverse process of C1. The superior oblique and the rectus capitis posterior major muscles were then dissected off the inferior nuchal line, and the suboccipital muscle group was retracted inferomedially en bloc . The greater auricular nerve was retracted laterally with the SCM, and the greater occipital nerve was retracted inferomedially with the suboccipital muscle group. Conclusion This technique avoids the obstructive muscle bulk that results from a myocutaneous approach while maximizing deep exposure. Understanding the detailed muscular anatomical relationship with the insertion location and suboccipital nerves is key to complete and safe extracranial dissection. Diligent dissection helps minimize postoperative pain and muscle spasm while optimizing the closure technique.

Single Layered Free ILM Graft Technique in Large Macular Holes with Associated ERM

ABSTRACT Purpose We aimed to describe single layered free ILM graft technique (FIGT) and present results of this technique in the primary surgery of large macular holes (MHs). Methods In this retrospective study, we identified MHs with a minimum hole diameter >400 μm that underwent FIGT by a single surgeon. Nineteen eyes were found to have an associated epiretinal membrane (ERM) and four eyes demonstrated a patchy ILM staining intraoperatively. A single layered FIGT was performed first by peeling the ILM around the hole and then creating a free ILM flap and transplanting it to cover the hole. All cases were evaluated for anatomical closure and visual improvement. Results Twenty-three eyes of 22 patients (mean age 68.7 ± 7.4 years) were included in the study. The mean follow-up was 9.6 ± 4.9 months. Flap closure was observed in two eyes (8.6%) at week 1, while all eyes (100%) showed a complete closure at month 1. Mean preoperative visual acuity of 1.42 ± 0.66 LogMAR increased to 1.11 ± 0.51, 0.99 ± 0.34, 0.92 ± 0.38, 0.74 ± 0.37, 0.52 ± 0.28, 0.64 ± 0.39 respectively at week 1, month 1, month 3, month 6, year 1 and final follow-up postoperatively (p < .05 for all). In none of the eyes ERM recurred, nor flap contraction developed. Conclusion The study showed encouraging results using free ILM graft in the primary surgery of large MHs. This technique might be considered in large MHs that are associated with ERM or demonstrate patchy ILM staining. Further studies are needed to prove the effectiveness also in the long-term.

Unilateral peg-shaped mandibular central incisor and direct composite resin treatment: A case report

Aim: This case report describes the restorative treatment process of a non-syndromic unilateral peg-shaped left mandibular central incisor. Case presentation: A 23-year-old female patient was admitted for aesthetic concerns related to the appearance of the anterior mandible and a peg-shaped incisor. The color selection was done on clean, hydrated teeth. The teeth were roughened with a minimal red belt bur, a 37% phosphoric acid gel was applied to the enamel for 30 seconds, and the teeth were washed with water for 30 seconds to remove the acid agent. Following the application of a universal adhesive to the surface according to the manufacturer’s instructions, the palatal and proximal walls were formed using a mylar strip and an A2B-colored resin composite. Then, polymerization of the restoration was completed using an incremental layering technique. After the removal of any excess restoration, low-speed finishing and polishing were done using aluminum oxide and flexible rubber polishing disks containing diamond particles. After the resin application, the treatment was completed. Conclusion: To achieve optimal results in the treatment of patients, restorative treatment can be recommended, considering the position and condition of the tooth. When choosing the most appropriate treatment for a patient, the advantages and limitations of each technique should be carefully explained, and the most conservative treatment should be recommended. How to cite this article: Fidan M. Unilateral peg-shaped mandibular central incisor and direct composite resin treatment: A case report. Int Dent Res 2023;13(1):44-47. https://doi.org/10.5577/idr.2023.vol13.no1.7 Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

A comparative study of single layer versus double layer small bowel anastomosis

Background: There are various gastrointestinal surgeries in which we require small bowel anastomosis. Bowel anastomosis is quite common in different bowel pathology. Bowel anastomosis can be done by hand sewn or y stapler. In hand sewn anastomosis, we can do single layer or double layer anastomosis. Method: The study was carried out in 50 patients between August 2019 to March 2020. In this study, we have included all the patients who require small bowel end to end anastomosis in either elective surgeries or emergency surgeries. Patients who require proximal stoma formation and other than small bowel anastomosis are excluded. In present study, patients were randomly allocated in two groups: group A (n=25) includes single layer(interrupted) hand sewn bowel anastomosis and group B two layer (Connell and seromuscular) handsewn bowel anastomosis. Author have compared two groups in terms of intraoperative time and postoperative leak. Results: This shows that there is significantly reduce in intraoperative time in group A patient while there is no significant difference in postoperative complication or postoperative leak between two groups. Conclusions: There is no significant difference in single layer and double layer technique of bowel anastomosis.

Improving soundproof characteristics of an FG-CNT–reinforced composite structure by adding a coating magneto-electro-elastic layer

This paper deals with sound propagation through a two-layer sandwich plate in which the carbon nanotubes with functionally graded (FG) distribution are coated by a thin layer of magneto-electro-elastic (MEE) materials. Firstly, the derivation of governing equations for each layer of the sandwich plate is followed according to the three-dimensional elasticity theory. In this regard, the relationship between the equations of motion for the layer, made of MEE materials, and the electric and magnetic potentials is established. Additionally, the effective properties of the nanocomposite layer are extracted by employing the rule of mixture. Afterward, the solution is finalized by employing the approximate layer and transfer matrix technique, in accordance with the definition of state space and sound transmission loss. In the next stage, to confirm the reliability of the derived relationships, three configurations of the panel are examined. Firstly, according to the obtained results, it is evident that adding a thin coating layer of triple-phase MEE materials effectively improves the sound insulation in the sandwich plate. Secondly, considering the electromagnetic boundary conditions can lead to a noticeable enhancement in the STL in the stiffness region. Moreover, the magnetic potential, compared to the electric one, is seen to be more effective on the acoustic radiation of the sandwich panel.

High efficiency perovskite/heterojunction crystalline silicon tandem solar cells: towards industrial-sized cell and module

29.2%-conversion efficiency of a two-terminal (2T) perovskite/crystalline Si heterojunction tandem solar cell using 145 μm thick industrial Czochralski (CZ) Si wafer is obtained. The structural optimization, such as surface passivation of the perovskite layer and better light management techniques, improved power conversion efficiency (PCE). To our knowledge, this PCE is the best in 2T-tandem solar cells using CZ wafers. Towards industrialization, crucial issues with the 2T tandem solar cells with crystalline Si bottom cell are discussed. Four-terminal (4T) tandem solar cells are evaluated as an approach to avoid the crucial issues. Examining our base technologies which realize 22.2%-conversion efficiency perovskite single junction solar cell module and 26%-heterojunction back-contact solar cells, we clarified that the based technologies were ready to realize 30%-conversion efficiency 4T perovskite/heterojunction crystalline Si tandem solar cells with approximately quarter size of an industrial crystalline Si solar cell (∼64 cm2).