Latent Heat Storage Research Articles

Enhanced Efficiency of Latent Heat Energy Storage by Inclination

Latent heat storage (LHS) has emerged as a promising solution for addressing the challenges of large-scale and long-term energy storage, offering a clean and reusable system. Being in the developmental stage, and with only limited theoretical predictions being available, there is a need to enhance the efficiency of LHS systems. In this study, we use numerical simulations to study the melting process of a phase-change material (PCM) in a rectangular domain. A significant enhancement in the melt rate of the PCM is found by a simple inclination of the domain, with a 60% increase in melt rate compared to a standard square unit without inclination through enhanced heat transfer. We establish a theoretical relation for the optimal PCM melt rate, based on the inclination angle and the domain aspect ratio, outlining the optimal conditions for the PCM melt rate, which is solely dependent on the domain geometry. We further propose a heat-transfer model that predicts the optimal aspect ratio for achieving the maximum melt rate as a function of the Rayleigh and Prandtl numbers. Published by the American Physical Society 2024

Evaluation into the effect of lignocellulosic biochar on the thermal properties of shape stable composite phase change materials

Biochar is suitable for preparing shape stable composite phase change materials (sscPCMs) due to the advantages of cost-effective, environmentally, and sustainability. However, the heat properties of biochar-based sscPCMs were not consistent. To investigate how different types of biochar influence the thermal properties of sscPCMs, three types of sscPCMs were successfully prepared using peanut shell biochar (PSC), poplar wood biochar (PWC), and corn straw biochar (CSC) as framework materials and combined with stearic acid (SA). A comprehensive analysis of the thermal properties of three sscPCMs was performed, taking into account thermal conductivity, phase change latent heat, encapsulation efficiency, crystallization rate, and energy storage efficiency. The study indicated that among the three types of sscPCMs, SA/PWC sscPCMs demonstrated excellent comprehensive performance. The phase change latent heat of SA/PWC reached 100.13 J/g, and the thermal conductivity was 0.38 W/mK. Compared to SA/PSC, the phase change latent heat of SA/PWC increased by 45.96 %, with only a 28.30 % reduction in thermal conductivity. In comparison to SA/CSC, the thermal conductivity of SA/PWC improved by 18.75 %, while the phase change latent heat decreased by only 14.02 %. In addition, the proportions of cellulose, hemicellulose, and lignin played a crucial role in determining the thermal properties of sscPCMs. This study clarified the mechanism by which biochar influences the thermal characteristic of sscPCMs, offering valuable insights for choosing biochar framework materials.

Thermo-hydraulic performance evaluation of lattice structures with triply periodic minimal surfaces for latent heat storage devices

Triply periodic minimal surface (TPMS) structures exhibit significant potential in latent heat storage (LHS) applications. In this study, numerical investigations were conducted to study the thermal storage performance of four TPMS lattice types: Primitive, IWP, FRD, and Gyroid lattices, used as metallic skeletons in LHS devices. The volumes of both the TPMS skeletons and the phase change material (PCM) were kept constant, with PCM embedded either inside or outside the lattices. The melting process of PCM, the heat storage energy density, and the power density of the LHS units for different configurations were examined. Additionally, a performance evaluation coefficient was introduced to assess the heat transfer and flow characteristics of heat transfer fluid (HTF) flowing on both sides of the lattices. The results indicated that when using Primitive and FRD lattices, embedding the PCM within the internal space of the lattices resulted in a 20 % and 9.8 % higher energy storage compared to embedding it outside the lattices. The internal space of IWP and Gyroid lattices was more suitable for HTF flow channels, resulting in performance evaluation coefficients (PECs) that improved by 27.7 % and 86.3 %, respectively, when HTF flowed through the internal channels of these lattices. Moreover, the Gyroid lattice exhibited the most balanced overall heat transfer performance due to its minimal flow resistance, whereas the FRD lattice had the lowest flow performance due to its complex structure. Therefore, the Primitive and Gyroid lattices could be considered as new heat transfer structures for LHS devices, while the FRD lattice was more suitable for replacing traditional fin structures in heat sink devices.

Comprehensive enhancement of melting-solidifying process in latent heat storage based on eccentric fin-foam combination

A novel fin-foam combination, applying upward fins to accelerate natural convection and downward foams to dominate thermal conduction, was established to comprehensively enhance the melting and solidifying performance of horizontal shell-and-tube latent heat storage devices. Enhancement mechanisms of the current design were numerically investigated and compared with the typical eccentric and concentric design the whole melting-solidifying process. Among investigated enhancement designs, the fin-foam combination achieved the best results, reducing the melting time and the solidifying time by 47.9% and 55.4% respectively. Meanwhile, the relative difference between the melting and solidifying time was reduced to 12%, indicating a significant mitigation of the buckets effect of solidifying caused by eccentric designs. Further, the effect of the total enhancement material usage was investigated. Results showed that the marginal effect of the heat transfer enhancement started at 9 fins and 0.91 porosity, but the relative difference between melting and solidifying time then dropped below 0.61%. The economic assessment showed that increasing the amount of enhancement material can significantly improve the storage capacity per unit cost when the price ratio of the enhancement material to PCM is less than 10, indicating a considerable applicability and cost performance of fin-foam combination under different power density demands.

Experimental investigation of high-temperature latent heat storage packed bed using alloy-based phase change materials

This study explores the effectiveness of a high-temperature latent heat thermal energy storage (LTES) system incorporating Al-Si-based microencapsulated phase change material (MEPCM) composite pellets within a cylindrical packed bed. A parametric analysis was conducted to examine the impact of varying pellet sizes (1, 3, and 5 mm) and airflow rates (20–50 L min−1) on the efficiency of heat storage and discharge. The experimental approach included controlled charging and discharging cycles at temperatures ranging from 500 to 800 °C, with Reynolds numbers between 17.6 and 261. The findings indicate that the system achieved a maximum round-trip efficiency of 0.93, with no substantial gains observed beyond a Reynolds number of 150. Additionally, the results reveal the importance of minimizing heat loss to improve system efficiency, particularly during the discharge phase. These insights are crucial for optimizing the design and operational parameters of high-temperature LTES systems to enhance energy storage efficiency.

Performance of latent heat storage exchangers: Evaluation framework and fast prediction model

Performance of latent heat storage exchangers: Evaluation framework and fast prediction model

Thermal performance analysis of new bionic “fishbone” fins in a triplex-tube latent heat storage system with single cycle process

Targeting the low thermal conductivity characteristics of energy storage materials in latent heat thermal energy storage (LHTES) systems, a novel bionic fish bone fin design is proposed in this paper, and the numerical simulation is employed to analyze the thermal performance of a system during single charging and discharging cycle. In assessing the system, consideration is given to the time required to complete a cycle, mean temperature change rate, and charging and discharging efficiency over the course of a cycle. The temperature response of each monitoring point within the system was first analyzed for fishbone fins of different curvatures and found that the 30° and 60° fishbone fins have the fastest heat transfer rates and shortest cycle times, respectively. Subsequently, the effect of fishbone fractal position on the thermal performance of the system was investigated. The results showed that the system achieves the best circulating thermal performance when the fishbone fins are positioned in the middle of the straight fins. An increase in the dimensionless position of the fins from 0.2 to 0.5 produced a reduction in the cycle time of 28.03 % and an increase in the energy transfer efficiency of 38.15 %. Finally, the shortest cyclic cycle and the fastest heat transfer rate were taken as the optimization objectives to optimize and predict the thermal performance of the system through the response surface method. The findings demonstrated that the system exhibited optimal thermal performance when the radian angle of the fishbone fin is 44.43° and the dimensionless position is 0.45. Compared to traditional rectangular straight fins, the optimized structure reduces the cycle time by 52.64 % and increases the average heat transfer rate by 101.58 %.

Hybrid membranes incorporating microencapsulated PCM for enhanced hygrothermal performance in enthalpy recovery ventilation systems

Advancements in building technologies are increasingly centered on improving energy efficiency, particularly within ventilation systems. Integrating Microencapsulated Phase Change Materials (MPCMs) into paper-based membranes enhances hygrothermal performance in enthalpy recovery ventilation systems. MPCMs, known for their latent heat storage capabilities, were incorporated at concentrations of 0 %, 5 %, 10 %, and 20 % by weight. The hybrid membranes exhibited a significant latent heat storage capacity, achieving up to 34.38 J/g at MPCM 20 wt% content. Although the latent heat decreased by approximately 10 % after 1000 cycles of extreme temperature fluctuations between 15 °C and 60 °C, the membranes still exhibited durability sufficient to endure a replacement cycle of over three years, maintaining their effectiveness in long-term applications. The addition of MPCMs also led to improvements in moisture resistance, with the moisture resistance coefficient increasing from 8.88 to 19.19 at MPCM 20 wt%, while still preserving sufficient moisture permeability for efficient enthalpy exchange. These improvements in thermal and hygrothermal properties underscore the potential of MPCM-integrated membranes to enhance energy efficiency and thermal comfort in HVAC systems, providing a sustainable solution for modern building designs. The findings suggest further exploration into optimizing MPCM content for varying climate conditions and assessing the long-term performance of these membranes in diverse practical applications.

Fabrication and evaluation of eicosane/poly(styrene-co-butylacrylate) microencapsulated phase change materials through ultrasonicated mini-emulsion technique

This study reports the synthesis and characterization of Microencapsulated Phase Change Materials for the pertinence of latent heat storage. Eicosane/ Poly(Styrene-co-Butylacrylate) [ESE/Poly(Sty-co-BA)] microcapsules were synthesized by encapsulating n-Eicosane (n-ESE) with a shell made of Poly(Styrene-co-Butylacrylate) [Poly(Sty-co-BA)] via employing ultrasonic-assistant mini-emulsion polymerization technique. The properties of the synthesized ESE/Poly(Sty-co-BA) microcapsules were analyzed by Differential scanning calorimetry (DSC),Thermogravimetric analysis (TGA), Transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR)spectroscopy. DSC results indicated that ESE/Poly(Sty-co-BA) exhibited a melting and crystallizing temperature of 35.72 and 32.27 °C, and latent heat of 220.53 and 218.57 J/g, respectively. The ESE/Poly(Sty-co-BA) microcapsules prepared in this work unveiled an effective encapsulation ratio (91.93 %), encapsulation efficiency (91.59 %) and displayed excellent thermal storage capacity (99.63 %). Various models such as Kissinger’s, Augis and Bennett’s approximation, Mahadevan and Arvami theory were employed to determine the effective activation energy value alongside the crystal growth of n-ESE and ESE/Poly(Sty-co-BA). TGA analysis revealed that ESE/Poly(Sty-co-BA) demonstrated three step degradation and exhibited good thermal stability. The findings of the work manifested a novel technique for producing the phase transition materials for TES that can be applied to a wide range of instances, including smart textiles, thermo-sensitized functional coatings, passive space cooling or heating.

Numerical simulation of transient thermal stresses in medium- and high-temperature latent heat storage systems with different fins: Incorporation of experimental stress cracking

Latent heat storage systems play an essential role in energy applications by improving the utilization efficiency and increasing the system flexibility. In this study, a pilot-scale medium-to-high-temperature latent heat storage system was constructed, and experimental heat storage tests were conducted. The temperature distribution of the experimental system was verified through numerical simulations that coupled the physical fields of the fluids, heat transfer, and solid mechanics. Also, the changing dynamic behavior of the stresses in the heat storage process related to the experiments was carefully studied. It was discovered that there were stress concentrations where the heat exchanger tubes touched the casing, with the highest level being over 370.00 MPa. Experimental stress rupture of the shell occurred in the horizontally arranged heat-exchange tubes, whereas vertically arranged tubes significantly reduced the stress at the contact surfaces by 24.70 % according to simulations. Simulation studies on various influencing factors indicated a more significant impact of spiral fins on the system stress. Increasing the preheating temperature by 30 °C reduced stress on the front surface by 109.67 MPa; each 20 °C increase in heating temperature raised the stress by 223.30 MPa, whereas the effect of heat transfer fluid speed was minimal. Regarding the heat-exchange tube dimensions, increasing the height increased the tube body stress by 25.74 MPa, whereas increasing the thickness reduced the stress by 24.20 %. This study comprehensively analyzed the stress dynamics and mitigation strategies of the high-temperature latent heat storage system under various conditions, emphasizing the importance of heat-exchange tube orientation, temperature control, and fin design for optimizing system performance and durability.

Enhancing thermo-physical properties of hybrid nanoparticle-infused medium temperature organic phase change materials using graphene nanoplatelets and multiwall carbon nanotubes

Phase change materials (PCMs) have emerged as an intriguing option for the storage of thermal energy because of their remarkable capacity to store latent heat. However, the practical application of these materials is hindered by their low thermal conductivity and limited photo-absorbance. For this investigation, graphene nanoplatelets (GNP) and multiwall carbon nanotubes (MWCNT) hybrid nanoparticles were disseminated in RT-54HC organic PCMs at different weight fractions. The nanoparticles were incorporated into the base PCMs using a melt blending technique. Based on the findings, one combination of GNP to MWCNT in a 0.25:0.75 ratio has shown the highest thermal conductivity, with an increase of 40% (0.28 Wm−1 K−1) compared to other hybrid combinations. This breakthrough could potentially open new avenues in the field of thermal energy storage. The chemical stability of the hybrid nanoparticle dispersed composites was assessed through FTIR analysis. In addition, the composites exhibited excellent thermal stability, maintaining their structural integrity even at temperatures as high as 300 ℃. The melting temperature of the composites also showed minimal variation. Based on the evaluation of latent heat enthalpy, the organic PCM known as base RT-54HC demonstrated a heat storage capacity of 230 J/g. However, the composites exhibited a slight decrease in latent heat with increasing nanoparticle weight fraction. In addition, the composite with added hybrid nanoparticles demonstrated an increase in optical absorbance, accompanied by a decrease in transmissibility. Therefore, the hybrid nano-enhanced composites have demonstrated enhanced thermo-physical properties, making them not only suitable but also highly promising for use in applications with mid-range melting temperatures.Graphical

Preparation and Characterization of Poly(lactic acid)-Based Poly(ethylene glycol) and Daphne Essential Oil-Loaded Smart Nanofibers for Thermal Protection.

Phase change material (PCM) stores latent heat energy, and poly(ethylene glycol) (Mw: 4000) (PEG 4000) is also a solid-liquid PCM. PEG and poly(lactic acid) (PLA) polymers are biodegradable. Essential oils are known as plant extracts with antimicrobial properties. In this study, daphne essential oil (DEO) obtained by the distillation method and PLA/PEG/DEO composite nanofibers were prepared by the electrospinning method with PLA, PEG 4000, and daphne (Laurus nobilis L.) essential oil in certain ratios (100/100/20, 100/120/20, and 100/150/20). DEO showed an antibacterial effect against Staphylococcus aureus and Escherichia coli bacteria. Thermal behaviors of the nanofibers were characterized by differential scanning calorimetry and thermogravimetric analysis. Morphological features were observed by scanning electronic microscopy (SEM), crystal behavior by X-ray diffraction analysis, and molecular structures were examined by Fourier transform infrared spectroscopy. Essential oil composition was determined by GC-MS. The thermal decomposition temperatures of the nanofibers were found between 250 and 276 °C, and the latent heat storage energies of nanofibers were 69.06, 86.76, and 96.39 J g-1 at temperatures 59.0 and 54.37 °C. High PCM added fiber was observed as 182 nm diameter with 3.264 μm diameter spheres. The produced nanofiber matrix has the potential to be used in applications such as medicine, textile, and hot food logistics.

Thermodynamic and advanced exergy analysis of Rankine Carnot battery with cascaded latent heat storage

Cascaded latent heat storage offers significant advantages in Rankine Carnot battery systems by minimizing exergy destruction during heat transfer processes. However, the system performance and the sources of exergy destruction remain unclear, and the configuration of multiple phase change materials remains ambiguous. This paper investigates a Rankine Carnot battery system integrated with cascaded latent heat storage using energy, conventional exergy, and advanced exergy analysis methods. First, a novel phase change material partitioning configuration scheme is proposed, considering the phase change of the working fluid, significantly improving temperature matching within the storage. The number of stages in heat storage devices significantly affects system performance, with roundtrip and exergy efficiencies increasing by 32.2 % and 15.2 % as the number of stages rises from 1 to 4, though further increases have minimal impact. Advanced exergy analysis on a 4-stage system indicates that the endogenous avoidable exergy destruction of the expander, compressor, evaporator, and condenser constitutes 12.4 %, 12.0 %, 10.5 %, and 7.0 % of the total system exergy destruction, respectively, highlighting the priority components for system improvement. Furthermore, raising the heat storage temperature by 45 °C reduces roundtrip efficiency by 26.5 % while increasing power output by 63.2 %. Increasing the heat pump’s evaporation temperature by 30 °C improves roundtrip efficiency by 151.1 % but reduces power output by 33.7 %. Reducing the amount of waste heat and surplus electricity results in a significant decrease in the roundtrip efficiency and exergy efficiency, which is mainly caused by the reduction in the isentropic efficiencies of compressor and expander under partial load conditions. The findings on the priority components for system improvement and the configuration of cascaded latent heat storage provide an effective approach for enhancing Rankine Carnot batteries.

Optimization of a finned multi-tube latent heat storage system using new structure evaluation indexes

The latent heat thermal energy storage (LHTES) is one of the most promising ways of storing solar thermal energy. Since the thermal conductivity of phase change materials are low, traditional shell and tube heat exchangers tend to develop dead zones. Therefore, structural optimization is essential, and a finned multi-tube design is recommended. In this work, nineteen structures for a heat storage tank are designed to explore the influence of different specifications of heat exchange tubes and fins on heat storage/release performance. After establishing 3D physical models, ANSYS/Fluent simulation and a two-step optimization for charging and discharging processes were conducted. Among these structures, N3-M3-D10.2 emerged as the most efficient during charging process in terms of reducing the complete melting time by 25 % and increasing the 3-h heat storage volume by 2.95 times; however, it shows low performance during discharging process, especially with a 2.24 times non-uniformity factor. In the four preferred structures, the benefit-to-cost ratio of N3-M3-D10.2 is 48 %–86.6 % higher than that of the others. The results also show that the number of tubes and fins are negatively related to the melting rate, and positively related to the solidification rate. Moreover, the influence of fin diameter is greater than that of fin number and tube diameter on heat transfer rate. The novelty of this work is not only lies in both considering the charging and discharging processes, but also in using dimensionless normalized indexes and different weights based on customers’ actual requirements for optimization.

Effect of air layer on PCMs melting process inside a spherical container: A numerical investigation

Efficient latent heat storage technology is getting significant interest from the researchers, scientist, and engineers who are involved in solar heating and cooling, waste heat utilization, and building energy management applications. The latter materials are employed most frequently in this connection owing to their pronounced energy storage capacity and moderate cost. The present work involves a numerical analysis for the assessment of heat transfer through paraffin wax RT42 when it is fully converted from solid to liquid phase in a spherical container with and without air layer. The interaction of the py-porosity combination was evaluated numerically with the use of ANSYS/FLUENT 16 program. The results show that the presence of a 1 mm thick air layer increased the total melting time by 33.33%, while a 2 mm thick air layer resulted in a 66.67% increase compared to the control without an air layer. In this research, it is clear that air layers play a major role in the delay of the melting of paraffin wax.

Experimental study on the effects of integrating phase change material with a solar updraft tower

AbstractThe solar updraft tower power plant presents a promising renewable energy solution but faces limitations in thermal efficiency and energy production during nonsunny hours. This study addresses a critical gap in the literature by investigating the integration of latent heat storage systems utilizing paraffin wax as phase change materials (PCMs) to enhance solar updraft tower (SUT) performance. Two identical small‐scale SUTs were constructed, both using the same tank configuration; however, the PCM device was filled with paraffin wax as a PCM, while the non‐PCM device contained only atmospheric air. Three scenarios were explored, featuring varying PCM tank heights of 2, 4, and 6 cm (the full capacity of the PCM tank). Results indicated that, from 3 p.m. until sunset, the PCM‐integrated SUT in Case 3 (with 6 cm of PCM) achieved the best performance, with an average absorber temperature rise of 25°C, compared with 12°C for the non‐PCM device. During the same period, the average air velocity at the tower neck, where a wind turbine could be installed, was 1.21 m/s for the PCM device, versus 0.82 m/s for the non‐PCM device. Notably, the nocturnal operating time extended significantly with PCM use, rising from 90 min for the 2 cm case to 125 min for the 6 cm case. In contrast, the non‐PCM device exhibited no operational time after sunset. This research not only demonstrates the effectiveness of PCM in improving the thermal performance and operational longevity of SUTs but also introduces a novel tank configuration that allows for flexible PCM integration, representing a significant advancement in the development of more efficient SUT systems.

Bacterial cellulose-based Janus energy storage phase change composite aerogel for efficient interfacial solar vapor generation

Interfacial solar evaporation systems based on Janus structures exhibit potential application prospects in terms of salt tolerance. However, intermittent and unstable light conditions limited the evaporation rate and water production performance of the evaporators. The introduction of energy storage phase change (ESPC) composite materials into the interface solar evaporators can effectively solve this problem. In this work, bacterial cellulose (BC) is selected as the matrix material, sodium alginate (SA) and multi-walled carbon nanotubes (MWCNTs) are added as functional fillers, and porous composite aerogels are prepared using direct freeze-drying. On this basis, Janus porous composite aerogel (J-BCS/CNT) with ESPC function is further constructed by depositing paraffin onto the upper layer of the aerogel through a unilateral vacuum impregnation method. The aerogel exhibits strong photothermal conversion capabilities and excellent thermal management properties. The addition of appropriate amount of MWCNTs enables it to obtain high latent heat storage and release functions, providing energy for operation in dark conditions. Under the solar irradiation of 1.5 kW m−2, J-BCS/CNT40% aerogel exhibits a high evaporation rate of 1.95 kg m−2h−1 in pure water and 0.67 kg m−2h−1 under dark conditions. The salt evaporation resistance test shows that the aerogel has excellent purification capabilities in high-concentration salt water (20 wt%) solutions. More importantly, the long-term energy storage-release tests of J-BCS/CNT in 3.5 wt% saline water indicate that the aerogel reveals excellent sustainability and latent heat release functions.

Systematic review of the use of phase change material (PCM) in concrete and the fire performance of PCM in concrete

ABSTRACT The Mechanical properties of concrete significantly deteriorate when exposed to fire, with explosive spalling posing a major threat to structural integrity. This highlights the need for effective insulation systems to protect concrete structures in fire conditions. However, current insulation solutions are typically installed externally, requiring additional labour and materials. This review explores the potential of incorporating Phase Change Materials (PCMs) directly into concrete as an embedded insulation system. As a latent heat storage material, PCM offers promising fire-resistant properties, reducing the need for external insulation while improving the fire performance of concrete. This paper presents a bibliometric analysis and a systematic review of recent publications on the use of PCMs in concrete and their fire performance applications. One thousand two hundred and four publications retrieved from Scopus© and Web of Science databases were passed through the PRISMA flowchart to obtain a database of recent literature on the study area. The current trend of research shows a shift towards inorganic PCMs in concrete. There is a significant lack of studies on using inorganic and eutectic PCM in concrete for fire applications and existing studies show inorganic PCM can be a viable solution. Commercial availability and lack of synthesised encapsulated PCM were found to be barriers to research.

Experimental study of the energy and exergy performance of a solar parabolic dish concentrator integrated with thermal energy storage

Concentrating solar power is rapidly becoming a mainstay of solar energy systems, with the parabolic dish concentrator being a common and high-performing option for medium-temperature applications. This study investigates the thermal performance of a parabolic dish concentrator integrated with phase change material based thermal energy storage. Energy and exergy efficiencies are compared for a water-based storage tank in thermosyphon circulation mode, both with and without phase change materials encapsulation. Various phase change materials capsules were strategically positioned within the tank in a certain position, which satisfies the melting temperature of the studied phase change materials. Steam generation was also measured and correlated with solar irradiation intensity. This study aims to address the changes in energy and exergy efficiencies for the system integrated with latent heat storage encapsulation. Results show the highest overall energy efficiency 46.7% was achieved with copper cylindrical capsules, while the base case without phase change materials yielded the highest overall exergy efficiency 5.23%, closely followed by the copper cylindrical capsule 4.94%. Peak energy and exergy efficiencies reached 79.37% and 11.12%, respectively. The copper cylindrical capsules provided the optimal balance between thermal and storage performance without compromising efficiency.

Analysis and characterization of residual salts from lithium carbonate industry: Their potential uses for thermal storage systems

The increasing demand for clean energy and the urgent need to reduce greenhouse gas emissions have led to a growing awareness of the importance of thermal energy storage systems in the diversification of the electric matrix. Sensible heat and latent heat storage are the two main techniques, and the choice of storage system depends on the melting point of the substances and the thermal energy required for the processes. This study focused on waste salts obtained from the production process of lithium carbonate. The thermophysical properties of these salts, including specific heat, density, and thermal stability, were examined through various characterization techniques such as X-ray diffraction, chemical analysis, scanning electron microscopy, thermogravimetry, and differential scanning calorimetry. The results revealed promising thermal properties, chemical stability, and physical availability of the waste salts. Additionally, the study explored the potential benefits of reutilizing these waste salts, such as reducing environmental impact, promoting circular economy principles, and creating new market opportunities for commercial products. Overall, this research provides valuable insights into the thermophysical properties of waste salts from lithium carbonate production. The main results are heat capacity in the solid phase (0.767–3.143 J/g°C) and storable thermal energy (114–1153 TWht). These findings contribute to the design and optimization of thermal energy storage systems, highlighting the potential for sustainable and efficient energy storage solutions in the context of global clean energy transitions.