Enhancing thermo-physical properties of hybrid nanoparticle-infused medium temperature organic phase change materials using graphene nanoplatelets and multiwall carbon nanotubes

Abstract

Phase change materials (PCMs) have emerged as an intriguing option for the storage of thermal energy because of their remarkable capacity to store latent heat. However, the practical application of these materials is hindered by their low thermal conductivity and limited photo-absorbance. For this investigation, graphene nanoplatelets (GNP) and multiwall carbon nanotubes (MWCNT) hybrid nanoparticles were disseminated in RT-54HC organic PCMs at different weight fractions. The nanoparticles were incorporated into the base PCMs using a melt blending technique. Based on the findings, one combination of GNP to MWCNT in a 0.25:0.75 ratio has shown the highest thermal conductivity, with an increase of 40% (0.28 Wm−1 K−1) compared to other hybrid combinations. This breakthrough could potentially open new avenues in the field of thermal energy storage. The chemical stability of the hybrid nanoparticle dispersed composites was assessed through FTIR analysis. In addition, the composites exhibited excellent thermal stability, maintaining their structural integrity even at temperatures as high as 300 ℃. The melting temperature of the composites also showed minimal variation. Based on the evaluation of latent heat enthalpy, the organic PCM known as base RT-54HC demonstrated a heat storage capacity of 230 J/g. However, the composites exhibited a slight decrease in latent heat with increasing nanoparticle weight fraction. In addition, the composite with added hybrid nanoparticles demonstrated an increase in optical absorbance, accompanied by a decrease in transmissibility. Therefore, the hybrid nano-enhanced composites have demonstrated enhanced thermo-physical properties, making them not only suitable but also highly promising for use in applications with mid-range melting temperatures.Graphical