Laser Fragmentation In Liquid Research Articles

Pulsed laser fragmentation synthesis of carbon quantum dots (CQDs) as fluorescent probes in non-enzymatic glucose detection

Pulsed laser fragmentation in liquid (PLFL) is one of the synthesis routes for producing high-purity carbon quantum dots (CQDs) with less toxic by-products in a straightforward system. The limited literature regarding the application of PLFL-synthesized CQDs motivated this study to exploit them as fluorescent probes in glucose sensing. The design of a fluorescent-based non-enzymatic glucose sensor was achieved by implementing CQDs and 3-aminophenylboronic acid (APBA) as fluorescent probes and glucose receptors, respectively. The CQDs were fabricated by PLFL through an Nd:YAG nanosecond laser, starting from the carbon powder dispersion in ethanol. Then, a laser-assisted post-modification process with oxidizing acid was implemented to produce water-dispersible CQDs for easy functionalization. Functionalizing these CQDs with APBA (CQDs-APBA) resulted in a blue-shifted fluorescence emission with a 35% quantum yield and high photostability. The CQDs-APBA exhibited a turn-off response at increasing glucose concentrations. This method offers good sensitivity with a linear detection range of glucose with a concentration of 0.165 to 8 mM and a detection limit of 165 µM. The applicability of this sensor to real analytes such as saliva obtained a satisfactory result with good reproducibility. This work proves that CQDs synthesized from PLFL can also be an alternative fluorescent probe for fluorescent-based sensing applications.

Physical Regimes and Mechanisms of Picosecond Laser Fragmentation of Gold Nanoparticles in Water from X-ray Probing and Atomistic Simulations.

Laser fragmentation in liquids has emerged as a promising green chemistry technique for changing the size, shape, structure, and phase composition of colloidal nanoparticles, thus tuning their properties to the needs of practical applications. The advancement of this technique requires a solid understanding of the mechanisms of laser-nanoparticle interactions that lead to the fragmentation. While theoretical studies have made impressive practical and mechanistic predictions, their experimental validation is required. Hence, using the picosecond laser fragmentation of Au nanoparticles in water as a model system, the transient melting and fragmentation processes are investigated with a combination of time-resolved X-ray probing and atomistic simulations. The direct comparison of the diffraction profiles predicted in the simulations and measured in experiments has revealed a sequence of several nonequilibrium processes triggered by the laser irradiation. At low laser fluences, in the regime of nanoparticle melting and resolidification, the results provide evidence of a transient superheating of crystalline nanoparticles above the melting temperature. At fluences about three times the melting threshold, the fragmentation starts with evaporation of Au atoms and their condensation into small satellite nanoparticles. As fluence increases above five times the melting threshold, a transition to a rapid (explosive) phase decomposition of superheated nanoparticles into small liquid droplets and vapor phase atoms is observed. The transition to the phase explosion fragmentation regime is signified by prominent changes in the small-angle X-ray scattering profiles measured in experiments and calculated in simulations. The good match between the experimental and computational diffraction profiles gives credence to the physical picture of the cascade of thermal fragmentation regimes revealed in the simulations and demonstrates the high promise of the joint tightly integrated computational and experimental efforts.

Laser-optimized Pt-Y alloy nanoparticles embedded in Pt-Y oxide matrix for high stability and ORR electrocatalytic activity

The development of active yet stable catalysts for oxygen reduction reaction (ORR) is still a major issue for the extensive permeation of fuel cells into everyday technology. While nanostructured Pt catalysts are to date the best available systems in terms of activity, the same is not true for stability, particularly under operating conditions. In this work, PtXY alloy nanoparticles are proposed as active and durable electrocatalysts for ORR. PtXY nanoalloys are synthesized and further optimized by laser ablation in liquid followed by laser fragmentation in liquid. The novel integrated laser-assisted methodology succeeded in producing PtxY nanoparticles with the ideal size (<10 nm) of commercial Pt catalysts, yet resulting remarkably more active with E1/2 = 0.943 V vs. RHE, specific activity = 1095 μA cm−2 and mass activity > 1000 Ag−1. At the same time, the nanoalloys are embedded in a fine Pt oxide matrix, which allows a greater stability of the catalyst than the commercial Pt reference, as directly verified on a gas diffusion electrode.

Efficient Synthesis of Submicrometer‐Sized Active Pharmaceuticals by Laser Fragmentation in a Liquid‐Jet Passage Reactor with Minimum Degradation

AbstractOne challenge in the development of new drug formulations is overcoming their low solubility in relevant aqueous media. Reducing the particle size of drug powders to a few hundred nanometers is a well‐known method that leads to an increase in solubility due to an elevated total surface area. However, state‐of‐the‐art comminution techniques like cryo‐milling suffer from degradation and contamination of the drugs, particularly when sub‐micrometer diameters are aspired that require long processing times. In this work, picosecond‐pulsed laser fragmentation in liquids (LFL) of dispersed drug particles in a liquid‐jet passage reactor is used as a wear‐free comminution technique using the hydrophobic oral model drugs naproxen, prednisolone, ketoconazole, and megestrol acetate. Particle size and morphology of the drug particles are characterized using scanning electron microscopy (SEM) and changes in particle size distributions upon irradiation are quantified using an analytical centrifuge. The findings highlight the superior fragmentation efficiency of the liquid‐jet passage reactor setup, with a 100 times higher fraction of submicrometer particles (SMP) of the drugs compared to the batch control, which enhances solubility and goes along with minimal chemical degradation (&lt;1%), determined by attenuated total reflection‐Fourier transform infrared spectroscopy (ATR‐FTIR), high‐performance liquid chromatography (HPLC), and X‐ray diffraction (XRD). Moreover, the underlying predominantly photo‐mechanically induced laser fragmentation mechanisms of organic microparticles (MP) are discussed.

Surface Chemistry and Specific Surface Area Rule the Efficiency of Gold Nanoparticle Sensitizers in Proton Therapy.

Gold nanoparticles (AuNPs) are currently the most studied radiosensitizers in proton therapy (PT) applicable for the treatment of solid tumors, where they amplify production of reactive oxygen species (ROS). However, it is underexplored how this amplification is correlated with the AuNPs' surface chemistry. To clarify this issue, we fabricated ligand-free AuNPs of different mean diameters by laser ablation in liquids (LAL) and laser fragmentation in liquids (LFL) and irradiated them with clinically relevant proton fields by using water phantoms. ROS generation was monitored by the fluorescent dye 7-OH-coumarin. Our findings reveal an enhancement of ROS production driven by I) increased total particle surface area, II) utilization of ligand-free AuNPs avoiding sodium citrate as a radical quencher ligands, and III) a higher density of structural defects generated by LFL synthesis, indicated by surface charge density. Based on these findings it may be concluded that the surface chemistry is a major and underexplored contributor to ROS generation and sensitizing effects of AuNPs in PT. We further highlight the applicability of AuNPs in vitro in human medulloblastoma cells.

Laser-generated nanoparticles from Fe-based metallic glass in water and its amorphization control by pulsed laser processing

The laser synthesis and processing of colloids represents a group of scalable and “green” synthesis methods of crystalline metal oxides, that have recently made encouraging progresses in preparing amorphous as well as defect-rich nanoparticles. The relevant conditions and mechanisms that allow the design of amorphous metal oxides (AMOs) remain unknown. Consequently, in this work the synthesis of Fe-based partially amorphous oxide nanoparticles (NPs) by pulsed laser ablation in water was studied. Furthermore, both laser pulse duration and the number of laser pulse in pulsed laser fragmentation in liquid (LFL) allow a precise control of amorphization of AMOs in water. Hereby, a high-fluence nanosecond-LFL provides a significantly higher amorphization rate, whereas picosecond-LFL always presents minor fractions of crystalline α-Fe even with a higher specific energy input and laser intensity. Consequently, the laser fluence required for the repeated melting and quenching of NP appears to be the decisive parameter to control amorphization. During laser synthesis and processing of colloids, the amorphization of AMOs appears to be linked to the apparent size reduction effect, while a complete full amorphization of AMOs may be attributed to the stronger oxidation effects. This work will stimulate future studies using laser-generated AMO NPs for further functional purposes.

Laser synthesis of ruby and its nanoparticles for photo-conversion of solar spectrum

Ruby grains are synthesized by laser heating of the dry mixture of Al2O3 and Cr2O3 in air. Quasi-continuous radiation of a Nd:YAG laser was used for this purpose with an average power of 15 W. The synthesized ruby was characterized by x-ray diffractometry. Ruby grains demonstrate strong photo-luminescence in the vicinity of 700 nm. Ruby particles were further fragmented to smaller particles using the technique of laser fragmentation in liquids and integrated into a polymer matrix. A luminescence map acquired with the help of a photo-fluorimeter confirms efficient photo-conversion of green-blue radiation of the synthesized ruby into the red region.

Computational study of laser fragmentation in liquid: Phase explosion, inverse Leidenfrost effect at the nanoscale, and evaporation in a nanobubble

Computational study of laser fragmentation in liquid: Phase explosion, inverse Leidenfrost effect at the nanoscale, and evaporation in a nanobubble

Molecular Dynamics Study of Laser Interaction with Nanoparticles in Liquids and Its Potential Application.

Laser interaction with nanoparticles in liquid is the fundamental theoretical basis for many applications but it is still challenging to observe this nanoscale phenomenon within a few nanoseconds in liquid by experiment. The successful implementation of the two-temperature method integrated with molecular dynamics (TTM-MD) in laser interaction with bulk material has shown great potential in providing a panoramic view of the laser interaction with the nanoparticles. However, the current TTM-MD model has to divide the system into cubic cells, which leads to mistakes near the nanoparticle’s surface. We introduce the latest model, which performs the TTM-MD on each individual cluster instead of the cubic cells, and its high-performance parallel cluster analysis algorithm to update the cluster size. The cluster-based TTM-MD revealed the nanoparticle formation mechanism of laser fragmentation in liquid (LFL) and facilitated the study of laser fluence’s effect on the size distribution. In addition to LFL, this model is promising to be implemented in the laser thermal therapy of tumors, laser melting in liquid (LML), etc. Although cluster-based TTM-MD has proven to be a powerful tool for studying laser interaction with nanoparticles, a few challenges and future developments for the cluster-based TTM-MD, especially the ionization induced by femtosecond, are also discussed.

Co-doping of iron and copper ions in nanosized bioactive glass by reactive laser fragmentation in liquids.

Bioactive glass (BG) is a frequently used biomaterial applicable in bone tissue engineering and known to be particularly effective when applied in nanoscopic dimensions. In this work, we employed the scalable reactive laser fragmentation in liquids method to produce nanosized 45S5 BG in the presence of light-absorbing Fe and Cu ions. Here, the function of the ions was twofold: (i) increasing the light absorption and thus causing a significant increase in laser fragmentation efficiency by a factor of 100 and (ii) doping the BG with bioactive metal ions up to 4wt%. Our findings reveal an effective downsizing of the BG from micrometer-sized educts into nanoparticles having average diameters of <50 nm. This goes along with successful element-specific incorporation of the metal ions into the BG, inducing co-doping of Fe and Cu ions as verified by energy-dispersive X-ray spectroscopy (EDX). In this context, the overall amorphous structure is retained, as evidenced by X-ray powder diffraction (XRD). We further demonstrate that the level of doping for both elements can be adjusted by changing the BG/ion concentration ratio during laser fragmentation. Consecutive ion release experiments using inductively-coupled plasma mass spectrometry (ICP-MS) were conducted to assess the potential bioactivity of the doped nanoscopic BG samples, and cell culture experiments using MG-63 osteoblast-like cells demonstrated their cytocompatibility. The elegant method of in situ co-doping of Fe and Cu ions during BG nanosizing may provide functionality-advanced biomaterials for future studies on angiogenesis or bone regeneration, particularly as the level of doping may be adjusted by ion concentrations and ion type in solution.

Laser fragmentation in liquid synthesis of novel palladium-sulfur compound nanoparticles as efficient electrocatalysts for hydrogen evolution reaction

One promising way to tune the physicochemical properties of materials and optimize their performance in various potential applications is to engineer material structures at the atomic level. As is well known, the performance of Pd-based catalysts has long been constrained by surface contamination and their single structure. Here, we employed an unadulterated top-down synthesis method, known as laser fragmentation in liquid (LFL), to modify pristine PdPS crystals and obtained a kind of metastable palladium-sulfur compound nanoparticles (LFL-PdS NPs) as a highly efficient electrocatalyst for hydrogen evolution reaction (HER). Laser fragmentation of the layered PdPS crystal led to a structural reorganization at the atomic level and resulted in the formation of uniform metastable LFL-PdS NPs. Noteworthy, the LFL-PdS NPs show excellent electrocatalytic HER performance and stability in acidic media, with an overpotential of –66 mV at 10 mA⋅cm−2, the Tafel slope of 42 mV⋅dec−1. The combined catalytic performances of our LFL-PdS NPs are comparable to the Pt/C catalyst for HER. This work provides a top-down synthesis strategy as a promising approach to design highly active metastable metal composite electrocatalysts for sustainable energy applications.

Photoluminescence of Fully Inorganic Colloidal Gold Nanocluster and Their Manipulation Using Surface Charge Effects.

Fully inorganic, colloidal gold nanoclusters (NCs) constitute a new class of nanomaterials that are clearly distinguishable from their commonly studied metal-organic ligand-capped counterparts. As their synthesis by chemical methods is challenging, details about their optical properties remain widely unknown. In this work, laser fragmentation in liquids is performed to produce fully inorganic and size-controlled colloidal gold NCs with monomodal particle size distributions and an fcc-like structure. Results reveal that these NCs exhibit highly pronounced photoluminescence with quantum yields of 2%. The emission behavior of small (2-2.5nm) and ultrasmall (<1nm) NCs is significantly different and dominated by either core- or surface-based emission states. It is further verified that emission intensities are a function of the surface charge density, which is easily controllable by the pH of the surrounding medium. This experimentally observed correlation between surface charge and photoluminescence emission intensity is confirmed by density functional theoretical simulations, demonstrating that fully inorganic NCs provide an appropriate material to bridge the gap between experimental and computational studies of NCs. The presented study deepens the understanding of electronic structures in fully inorganic colloidal gold NCs and how to systematically tune their optical properties via surface charge density and particle size.

On the Use of Laser Fragmentation for the Synthesis of Ligand-Free Ultra-Small Iron Nanoparticles in Various Liquid Environments.

Traditionally, the synthesis of nanomaterials in the ultra-small size regime (1–3 nm diameter) has been linked with the employment of excessive amounts of hazardous chemicals, inevitably leading to significant environmentally detrimental effects. In the current work, we demonstrate the potential of laser fragmentation in liquids (LFL) to produce highly pure and stable iron ultra-small nanoparticles. This is carried out by reducing the size of carbonyl iron microparticles dispersed in various polar solvents (water, ethanol, ethylene glycol, polyethylene glycol 400) and liquid nitrogen. The explored method enables the fabrication of ligand-free iron oxide ultra-small nanoparticles with diameter in the 1–3 nm range, a tight size distribution, and excellent hydrodynamic stability (zeta potential > 50 mV). The generated particles can be found in different forms, including separated ultra-small NPs, ultra-small NPs forming agglomerates, and ultra-small NPs together with zero-valent iron, iron carbide, or iron oxide NPs embedded in matrices, depending on the employed solvent and their dipolar moment. The LFL technique, aside from avoiding chemical waste generation, does not require any additional chemical agent, other than the precursor microparticles immersed in the corresponding solvent. In contrast to their widely exploited chemically synthesized counterparts, the lack of additives and chemical residuals may be of fundamental interest in sectors requiring colloidal stability and the largest possible number of chemically active sites, making the presented pathway a promising alternative for the clean design of new-generation nanomaterials.

Size Control of Synthesized Silver Nanoparticles by Simultaneous Chemical Reduction and Laser Fragmentation in Origanum majorana Extract: Antibacterial Application.

In this work, silver nanoparticles (Ag NPs) were synthesized using a chemical reduction approach and a pulsed laser fragmentation in liquid (PLFL) technique, simultaneously. A laser wavelength of 532 nm was focused on the as produced Ag NPs, suspended in an Origanum majorana extract solution, with the aim of controlling their size. The effect of liquid medium concentration and irradiation time on the properties of the fabricated NPs was studied. While the X-ray diffraction (XRD) pattern confirmed the existence of Ag NPs, the UV–Vis spectrophotometry showed a significant absorption peak at about 420 nm, which is attributed to the characteristic surface plasmon resonance (SPR) peak of the obtained Ag NPs. By increasing the irradiation time and the Origanum majora extract concentration, the SPR peak shifted toward a shorter wavelength. This shift indicates a reduction in the NPs’ size. The effect of PLFL on size reduction was clearly revealed from the transmission electron microscopy images. The PLFL technique, depending on experimental parameters, reduced the size of the obtained Ag NPs to less than 10 nm. The mean zeta potential of the fabricated Ag NPs was found to be greater than −30 mV, signifying their stability. The Ag NPs were also found to effectively inhibit bacterial activity. The PLFL technique has proved to be a powerful method for controlling the size of NPs when it is simultaneously associated with a chemical reduction process.

Continuous-Flow Flat Jet Setup for Uniform Pulsed Laser Postprocessing of Colloids.

Pulsed laser postprocessing (PLPP) of colloidal nanoparticles and related laser fragmentation in liquid (LFL) using a liquid jet setup have become an acknowledged tool to reduce the nanoparticle diameter down to a few nanometers, alter the crystal phase, or increase the defect density under high-purity and continuous-flow conditions. In recent studies on LFL that were conducted with a cylindrical liquid jet, intensity gradients and related incomplete illumination of the volume element passing through the laser beam path were reported to cause a broadening of the product particle size distribution, melting, and phase segregation. In this paper, we present a new flat jet design, which reduces the deviation of the laser intensity up to 10 times compared to the conventional cylindrical liquid jet. The experimental threshold intensity for gold nanoparticle fragmentation found with the cylindrical setup strongly deviates from the theoretical prediction, while they are in very good agreement for the flat jet setup. Additionally, a narrow product size fraction of 3 ± 2 nm was found for the flat jet, while the main product fraction gained from the cylindrical jet was 10 ± 8 nm in size under the same conditions. Consequently, the flat jet setup allows us not only to study laser fragmentation mechanisms with higher precision but also to gain product particles with narrow particle size distribution at single pulse per particle conditions even at elevated mass concentrations (>50 mg L-1). In future studies, these promising results also render the flat jet setup relevant for the other disciplines of PLPP such as laser melting and defect engineering.

Graphene Quantum Dots: Fundamental Understanding of the Formation Mechanism for Graphene Quantum Dots Fabricated by Pulsed Laser Fragmentation in Liquid: Experimental and Theoretical Insight (Small 38/2020)

The pulsed laser fragmentation in liquid (PLFL) process is a promising technique for the synthesis of carbon‐based functional materials. However, a fundamental deep understanding of the formation of graphene quantum dots (GQDs) from multiwalled carbon nanotubes (MWCNTs) by PLFL has still not been achieved despite the high demand. In article number 2003538, Jeong Ho Ryu, Hyuksu Han, Kang Min Kim, and co‐workers report a mechanism for the formation of GQDs from MWCNTs by the PLFL process, through the combination of experimental and theoretical studies.

Origin of Laser-Induced Colloidal Gold Surface Oxidation and Charge Density, and Its Role in Oxidation Catalysis

Laser fragmentation in liquids (LFL) allows the synthesis of fully inorganic, ultrasmall gold nanoparticles, usAu NPs (<3 nm). Although the general method is well established, there is a lack of un...

Fundamental Understanding of the Formation Mechanism for Graphene Quantum Dots Fabricated by Pulsed Laser Fragmentation in Liquid: Experimental and Theoretical Insight.

The pulsed laser fragmentation in liquid (PLFL) process is a promising technique for the synthesis of carbon-based functional materials. In particular, there has been considerable attention on graphene quantum dots (GQDs) derived from multiwalled carbon nanotubes (MWCNTs) by the PLFL process, owing to the low cost and rapid processing time involved. However, a fundamental deep understanding of the formation of GQDs from MWCNTs by PLFL has still not been achieved despite the high demand. In this work, a mechanism for the formation of GQDs from MWCNTs by the PLFL process is reported, through the combination of experimental and theoretical studies. Both the experimental and computational results demonstrate that the formation of GQDs strongly depends on the pulse laser energy. Both methods demonstrate that the critical energy point, where a plasma plume is generated on the surface of the MWCNTs, should be precisely maintained to produce GQDs; otherwise, an amorphous carbon structure is favorably formed from the scattered carbons.

Frontispiece: Room‐Temperature Laser Synthesis in Liquid of Oxide, Metal‐Oxide Core‐Shells, and Doped Oxide Nanoparticles

Laser synthesis of colloids emerged in recent years as a versatile approach to access a library of clean oxide nanoparticles relying on only four main strategies running at room temperature and ambient pressure: laser ablation in liquid, laser fragmentation in liquid, laser melting in liquid and laser defect-engineering in liquid. Here, established laser-based methodologies are reviewed through the presentation of a panorama of oxide nanoparticles. For more information, see the Review by V. Amendola, S. Barcikowski et al. on page 9206 ff.

Room-Temperature Laser Synthesis in Liquid of Oxide, Metal-Oxide Core-Shells, and Doped Oxide Nanoparticles.

Although oxide nanoparticles are ubiquitous in science and technology, a multitude of compositions, phases, structures, and doping levels exist, each one requiring a variety of conditions for their synthesis and modification. Besides, experimental procedures are frequently dominated by high temperatures or pressures and by chemical contaminants or waste. In recent years, laser synthesis of colloids emerged as a versatile approach to access a library of clean oxide nanoparticles relying on only four main strategies running at room temperature and ambient pressure: laser ablation in liquid, laser fragmentation in liquid, laser melting in liquid and laser defect‐engineering in liquid. Here, established laser‐based methodologies are reviewed through the presentation of a panorama of oxide nanoparticles which include pure oxidic phases, as well as unconventional structures like defective or doped oxides, non‐equilibrium compounds, metal‐oxide core–shells and other anisotropic morphologies. So far, these materials showed several useful properties that are discussed with special emphasis on catalytic, biomedical and optical application. Yet, given the endless number of mixed compounds accessible by the laser‐assisted methodologies, there is still a lot of room to expand the library of nano‐crystals and to refine the control over products as well as to improve the understanding of the whole process of nanoparticle formation. To that end, this review aims to identify the perspectives and unique opportunities of laser‐based synthesis and processing of colloids for future studies of oxide nanomaterial‐oriented sciences.