Laser-driven Source Research Articles

The dresden platform is a research hub for ultra-high dose rate radiobiology

The recently observed FLASH effect describes the observation of normal tissue protection by ultra-high dose rates (UHDR), or dose delivery in a fraction of a second, at similar tumor-killing efficacy of conventional dose delivery and promises great benefits for radiotherapy patients. Dedicated studies are now necessary to define a robust set of dose application parameters for FLASH radiotherapy and to identify underlying mechanisms. These studies require particle accelerators with variable temporal dose application characteristics for numerous radiation qualities, equipped for preclinical radiobiological research. Here we present the dresden platform, a research hub for ultra-high dose rate radiobiology. By uniting clinical and research accelerators with radiobiology infrastructure and know-how, the dresden platform offers a unique environment for studying the FLASH effect. We introduce its experimental capabilities and demonstrate the platform’s suitability for systematic investigation of FLASH by presenting results from a concerted in vivo radiobiology study with zebrafish embryos. The comparative pre-clinical study was conducted across one electron and two proton accelerator facilities, including an advanced laser-driven proton source applied for FLASH-relevant in vivo irradiations for the first time. The data show a protective effect of UHDR irradiation up to 10^{5}text{Gy}/text{s} and suggests consistency of the protective effect even at escalated dose rates of 10^9text{Gy}/text{s}. With the first clinical FLASH studies underway, research facilities like the dresden platform, addressing the open questions surrounding FLASH, are essential to accelerate FLASH’s translation into clinical practice.

Joint measurement of electron density, temperature, and emission spectrum of Nd:YAG laser-produced tin plasma

We present the results of joint measurements of electron density (ne), temperature (Te), and emission spectra of an Nd:YAG-driven tin plasma. Collective Thomson scattering provides space- and time-resolved ne and Te data during drive laser irradiation, and extreme ultraviolet (EUV) emission spectra, which is space-resolved in the target normal, are measured using a flat-field grazing incidence spectrometer (GIS). As the distance from the target increased, the emission intensity quickly decreases, and the peaks of the spectra gradually shift to longer wavelengths. This can be explained by the rapid decrease in ne, and thus, self-absorption, with an increase in distance. We obtain the EUV spectra by calculating the transfer of photons along the line-of-sight of the GIS, using theoretical emissivity and opacity, and applying the measured spatial distribution of ne and Te. The results quantitatively demonstrate that the self-absorption effect is significant; the emission from the core regions is mostly reabsorbed by the surrounding plasma. The calculated spectra are compared with the measured spectra. While good agreement is achieved in the spectral region of 13.3 and 15.3 nm, considerable differences are found in the 12.5–13 and 15.5–17.5 nm region. The results demonstrate the significance of this joint measurement for further validation of the atomic process model considering self-absorption effect, which is critical for the future high-density, solid laser-driven EUV source.

High-sensitivity extreme-ultraviolet transient absorption spectroscopy enabled by machine learning.

We present a novel denoising scheme for spectroscopy experiments employing broadband light sources and demonstrate its capabilities using transient absorption measurements with a high-harmonic source. Our scheme relies on measuring the probe spectra before and after interacting with the sample while capturing correlations between spectral components through machine learning approaches. With the present setup we achieve up to a tenfold improvement in noise suppression in XUV transient absorption spectra compared to the conventional pump on/ pump off referencing method. By utilizing strong spectral correlations in source fluctuations, the use of an artificial neural network facilitates pixel-wise noise reduction without requiring wavelength calibration of the reference spectrum. Our method can be adapted to a wide range of experiments and may be particularly advantageous for low repetition-rate systems, such as free electron lasers as well as laser-driven plasma and HHG sources. The enhanced sensitivity enables the investigation of subtle electron and lattice dynamics in the weak excitation regime, which is relevant for studying photovoltaics and photo-induced phase transitions in strongly correlated materials.

Coherent ultrafast photoemission from a single quantized state of a one-dimensional emitter.

Femtosecond laser-driven photoemission source provides an unprecedented femtosecond-resolved electron probe not only for atomic-scale ultrafast characterization but also for free-electron radiation sources. However, for conventional metallic electron source, intense lasers may induce a considerable broadening of emitting energy level, which results in large energy spread (>600 milli-electron volts) and thus limits the spatiotemporal resolution of electron probe. Here, we demonstrate the coherent ultrafast photoemission from a single quantized energy level of a carbon nanotube. Its one-dimensional body can provide a sharp quantized electronic excited state, while its zero-dimensional tip can provide a quantized energy level act as a narrow photoemission channel. Coherent resonant tunneling electron emission is evidenced by a negative differential resistance effect and a field-driven Stark splitting effect. The estimated energy spread is ~57 milli-electron volts, which suggests that the proposed carbon nanotube electron source may promote electron probe simultaneously with subangstrom spatial resolution and femtosecond temporal resolution.

Femtosecond multimodal imaging with a laser-driven X-ray source

Laser-plasma accelerators are compact linear accelerators based on the interaction of high-power lasers with plasma to form accelerating structures up to 1000 times smaller than standard radiofrequency cavities, and they come with an embedded X-ray source, namely betatron source, with unique properties: small source size and femtosecond pulse duration. A still unexplored possibility to exploit the betatron source comes from combining it with imaging methods able to encode multiple information like transmission and phase into a single-shot acquisition approach. In this work, we combine edge illumination-beam tracking (EI-BT) with a betatron X-ray source and present the demonstration of multimodal imaging (transmission, refraction, and scattering) with a compact light source down to the femtosecond timescale. The advantage of EI-BT is that it allows multimodal X-ray imaging technique, granting access to transmission, refraction and scattering signals from standard low-coherence laboratory X-ray sources in a single shot.

Investigation of boosted proton energies through proton radiography of target normal sheath acceleration fields in the multi-ps regime

Multi-kilojoule, multi-picosecond short-pulse lasers, such as the National Ignition Facility-Advanced Radiographic Capability laser and the OMEGA-Extended Performance laser, which have been constructed over the last two decades, enable exciting opportunities to produce high-brightness, high-energy laser-driven proton sources for applications in high-energy-density science like proton fast ignition for inertial fusion energy, particle radiography, and materials science studies. Results on these platforms have demonstrated enhanced accelerated proton energies and electron temperatures when compared to established scaling laws. Recent work has developed a new scaling for proton TNSA in the multi-ps regime. However, this new physics in the multi-ps regime motivates the need to understand the origin of the enhancement in proton energies. Toward this goal, this work presents the first measurements of the TNSA accelerating sheath field in the multi-ps regime for pulse durations of 0.6, 5, and 10 ps. This measurement was achieved by using a separate TNSA proton source to radiograph the spatiotemporal profile of the accelerating sheath that is responsible for proton acceleration. The use of stacked radiochromic film detectors allows for a discrete time profile of the radiographs, thus enabling the measurement of the temporal and spatial evolution of the accelerating field. In performing this measurement, we extract quantities such as the sheath strength as a function of time and pulse duration, which shows that longer pulse durations sustain a stronger electric field for a longer duration when compared to sub-ps laser pulses, which may enable the observed boosted proton energies and proton conversion efficiencies.

Ultrafast radiographic imaging and tracking: An overview of instruments, methods, data, and applications

Ultrafast radiographic imaging and tracking (U-RadIT) use state-of-the-art ionizing particle and light sources to experimentally study sub-nanosecond transients or dynamic processes in physics, chemistry, biology, geology, materials science and other fields. These processes are fundamental to modern technologies and applications, such as nuclear fusion energy, advanced manufacturing, communication, and green transportation, which often involve one mole or more atoms and elementary particles, and thus are challenging to compute by using the first principles of quantum physics or other forward models. One of the central problems in U-RadIT is to optimize information yield through, e.g. high-luminosity X-ray and particle sources, efficient imaging and tracking detectors, novel methods to collect data, and large-bandwidth online and offline data processing, regulated by the underlying physics, statistics, and computing power. We review and highlight recent progress in: (a.) Detectors such as high-speed complementary metal-oxide semiconductor (CMOS) cameras, hybrid pixelated array detectors integrated with Timepix4 and other application-specific integrated circuits (ASICs), and digital photon detectors; (b.) U-RadIT modalities such as dynamic phase contrast imaging, dynamic diffractive imaging, and four-dimensional (4D) particle tracking; (c.) U-RadIT data and algorithms such as neural networks and machine learning, and (d.) Applications in ultrafast dynamic material science using XFELs, synchrotrons and laser-driven sources. Hardware-centric approaches to U-RadIT optimization are constrained by detector material properties, low signal-to-noise ratio, high cost and long development cycles of critical hardware components such as ASICs. Interpretation of experimental data, including comparisons with forward models, is frequently hindered by sparse measurements, model and measurement uncertainties, and noise. Alternatively, U-RadIT make increasing use of data science and machine learning algorithms, including experimental implementations of compressed sensing. Machine learning and artificial intelligence approaches, refined by physics and materials information, may also contribute significantly to data interpretation, uncertainty quantification and U-RadIT optimization.

Perspectives on research on laser driven proton-boron fusion and applications

Recent experiments with high-intensity lasers have shown record production of α-particles by irradiating boron-hydrogen targets. This opened the way to completely new studies on proton-boron fusion with multiple goals:i) studies related to nuclear fusion. The proton-boron fusion reaction produces 3 α-particles and releases a large energy. It is considered an interesting alternative to deuterium-tritium fusion because it produces no neutrons, therefore no activation and radioactive wastes.ii) generation of novel laser-driven α-particle sources. Laser-driven α-particle sources are promising for their potential high brightness while remaining compact. They could be used for multidisciplinary applications, including medical ones.The COST Action CA21128 — PROBONO (PROton BOron Nuclear fusion: from energy production to medical applicatiOns) is the first international programme which aims at understanding the physics involved in laser-driven pB fusion, including the study of Equation of State of boron and boron compounds. Action's goals are to facilitate access to experimental infrastructures, maximize production of new knowledge, boost the career of young researchers by fostering opportunities for training, and finally interconnect researchers across countries building a well-organized community focused on pB research.

High-sensitivity electronic Stark spectrometer featuring a laser-driven light source.

We report developmental details of a high-sensitivity Stark absorption spectrometer featuring a laser-driven light source. The light source exhibits intensity fluctuations of ∼0.3% over timescales ranging from 1minto 12h, minimal drift (≤0.1%/h), and very little 1/f noise at frequencies greater than 200Hz, which are comparable to or better than an arc-driven light source. Additional features of the spectrometer include balanced detection with multiplex sampling, which yielded lower noise in A, and constant wavelength or wavenumber (energy) spectral bandpass modes. We achieve noise amplitudes of ∼7 × 10-4 and ∼6 × 10-6 in measurements of single A and ΔA spectra (with 92 data points) taking ∼7 and ∼19min, respectively.

Collimation, compression and acceleration of isotropic hot positrons by an intense vortex laser

Laser-driven positron sources, characterized by short pulse width, small focal spot and high energy, are promising for potential applications, e.g. electron–positron collider and positron annihilation spectroscopy. However, the broad divergence angle and wide pulse width during the laser-driven positron transport are extremely unfavorable for achieving high spatiotemporal resolution. In this paper, we propose a novel method to manipulate the positrons by using a left-hand circularly-polarized Laguerre–Gaussian (LG) laser pulse. Using the LG laser with a intensity of and a duration of a few cycles, three-dimensional particle-in-cell simulations reveal that isotropic hot positrons can be effectively captured, collimated, compressed, and accelerated due to the unique field structure of the LG laser. A high-quality positron bunch is obtained with a peak divergence angle of 1∘, an average pulse duration of 0.5 fs, a maximum energy of 450 MeV, and a density of 70 times that of the initial electron source. A damping vibration model is also formulated to explain qualitatively the quality improvement of the positrons.

High-energy quasi-monoenergetic proton beam from micro-tube targets driven by Laguerre–Gaussian lasers

High-energy proton beams with low energy spread and angular divergence are highly valuable in various applications, such as proton therapy, ultrafast science, and nuclear physics. Laser-driven ion sources are being explored as a more compact and cost-effective alternative to conventional accelerators. However, producing high-quality proton beams using lasers has been a significant challenge. In this study, we propose a novel approach to achieve high-energy quasi-monoenergetic proton beams by utilizing a Laguerre–Gaussian (LG) laser to irradiate a solid hollow tube target. Our three-dimensional particle-in-cell simulations demonstrate that the LG laser efficiently pulls out and accelerates electrons. As these electrons exit the rear side of the tube, a charge-separation electric field for proton acceleration is self-established. Meanwhile, a considerable part of the electrons are confined to the laser axis by the ponderomotive force of the LG laser, generating a longitudinal bunching field and transverse focusing field. As a result, protons are accelerated and focused in these fields, producing a high- quality proton beam with high energy (247 MeV) and low energy spread (∼2%) using an LG laser with an intensity of W cm−2 and a tube target with an electron density of 40nc . In comparison to a standard Gaussian laser, the LG laser exhibits superior performance in terms of proton cut-off energy, energy spread, and angular divergence.

Powerful Elliptically Polarized Terahertz Radiation from Oscillating-Laser-Driven Discharge Surface Currents

This work presents a general concept of an intense laser-driven source of strong electromagnetic waves, which can be used for obtaining powerful terahertz radiation with controlled polarization. It is shown that the irradiation of a solid target surface by short relativistic laser pulses at small angles provides the excitation of strong compact relativistic discharge current pulses, propagating in a certain direction. For elliptical targets, this current emits elliptically polarized electromagnetic radiation at a given frequency with the ellipticity and the spectra defined by the target geometry. The proposed setup allows reaching extreme THz intensities and provides easy control of the radiation parameters, making it attractive for various scientific and technological applications.

Laser-driven production with advanced targets of Copper-64 for medical applications

Radionuclides are of paramount importance in nuclear medicine both for clinical uses and radiopharmaceutical production. Among the others, nuclides suitable for theranostics like Copper-64 are particularly attractive since they can play both a diagnostic and therapeutic role. In the last years, the growing demand for these nuclides stimulated the research of new solutions, along with cyclotrons already in use, for their production. In this respect, a promising alternative is laser-driven proton accelerators based on the interaction of superintense laser pulses with target materials. Because of their potential compactness and flexibility, they are under investigation for several applications ranging from materials science to nuclear medicine. Moreover, the use of advanced Double-Layer targets (DLTs) was identified as a viable route to increase the number and energy of the accelerated protons to satisfy the requirements of demanding applications. In this contribution, we numerically investigate the use of DLT-based laser-driven sources for Copper-64 production. We show that activities relevant to pre-clinical studies can be achieved with an existing 150 TW laser and DLTs. Moreover, we extend the discussion by considering a broad range of laser systems by exploiting a theoretical model. Our results can guide the choice of laser and target parameters for future experimental investigations.

A laser proton accelerator targeting tumors in mice

High-power short-pulse lasers can generate intense but fluctuating bunches of energetic protons. We demonstrate a new level of stability for laser-driven proton sources that allowed us to successfully perform the world-wide first tumor irradiation study in mice with this novel radiation source.

Thermally stable red-emitting oxide ceramics for laser lighting.

Laser-driven phosphor-converted white light sources are highly desirable for their unprecedented energy efficiency and lighting quality. However, important challenges remain due to a lack of efficient and stable red-emitting materials. Here we explore Eu2+ -activated oxide-based double perovskites as red emitters with thermally stable photoluminescence. Sr3 TaO5.5 :Eu2+ ceramics exhibit a red emission band peaking at 620nm upon blue laser pumping owing to the Eu2+ occupation at highly ordered substitutional lattice sites. A constructed laser-driven white light wheel under an incident power density of 19.2W/mm2 presents a record luminous flux of 1115lm with an excellent color rendering indexof 90. Our study invigorates the development of Eu2+ -activated oxide-based ceramics with thermally stable luminescence for laser pumped lighting and display applications. This article is protected by copyright. All rights reserved.

Towards compact laser-driven accelerators: exploring the potential of advanced double-layer targets

The interest in compact, cost-effective, and versatile accelerators is increasing for many applications of great societal relevance, ranging from nuclear medicine to agriculture, pollution control, and cultural heritage conservation. For instance, Particle Induced X-ray Emission (PIXE) is a non-destructive material characterization technique applied to environmental analysis that requires MeV-energy ions. In this context, superintense laser-driven ion sources represent a promising alternative to conventional accelerators. In particular, the optimization of the laser-target coupling by acting on target properties results in an enhancement of ion current and energy with reduced requirements on the laser system. Among the advanced target concepts that have been explored, one appealing option is given by double-layer targets (DLTs), where a very low-density layer, which acts as an enhanced laser absorber, is grown to a thin solid foil. Here we present some of the most recent results concerning the production with deposition techniques of advanced DLTs for laser-driven particle acceleration. We assess the potential of these targets for laser-driven ion acceleration with particle-in-cell simulations, as well as their application to PIXE analysis of aerosol samples with Monte Carlo simulations. Our investigation reports that MeV protons, accelerated with a ∼20 TW compact laser and optimized DLTs, can allow performing PIXE with comparable performances to conventional sources. We conclude that compact DLT-based laser-driven accelerators can be relevant for environmental monitoring.

Polarized fusion and potential in situ tests of fuel polarization survival in a tokamak plasma

The use of spin-polarized fusion fuels would provide a significant boost towards the ignition of a burning plasma. The cross section for D + T → α + n, would be increased by 1.5 if the fuels were injected with parallel polarization. Furthermore, our simulations demonstrate additional non-linear power gains in large-scale machines such as ITER, due to increased alpha heating. Such benefits require the survival of spin polarizations for periods comparable to the particle confinement time. During the 1980s, calculations predicted that polarizations could survive a plasma environment, although concerns persisted regarding the cumulative impacts of wall recycling. In that era, technical challenges prevented direct tests and left the large scale fueling of a power reactor beyond reach. Over the last decades, this situation has changed dramatically. Detailed simulations of ITER have predicted negligible wall recycling in a high-power reactor, and recent advances in laser-driven sources project the capability of producing large quantities of ∼100% polarized D and T. The remaining crucial step is an in-situ demonstration of polarization survival in a plasma. For this, we outline a measurement strategy using the isospin-mirror reaction, D + 3He → α + p. Polarized 3He avoids the complexities of handling tritium, while encompassing the same spin-physics. We evaluate two methods of delivering deuterium, using dynamically polarized Lithium-Deuteride (with vector polarization PV D of 70%) or frozen-spin Hydrogen-Deuteride (with PV D of 40%), together with a method of injecting optically-pumped 3He (with 65% polarization). Pellets of these materials all have long polarization decay times (∼6 min for LiD at 2 K, ∼2 months for HD at 2 K, and ∼3 d for 3He at 77 K), all far greater than a plasma shot in a research tokamak such as DIII-D (∼20 s). Both species can be propelled from a single cryogenic injection gun. We review plasma requirements and strategies for detecting polarization survival. Polarization alters both fusion yields and the angular distribution of fusion products, and each of these provides a potential signal. In this paper we simulate a selection of shots with similar characteristics in a future high-Tion H plasma, and find ratios of yields from shots with fuel spins parallel and antiparallel reaching 1.3 (HD + 3He) to 1.6 (LiD + 3He) over a wide range of poloidal angles. (A companion paper finds sensitivity to fusion product angular distributions as reflected in the pitch angles of protons and alphas reaching the plasma facing wall.)

X-ray magnetic circular dichroism spectroscopy at the Fe L edges with a picosecond laser-driven plasma source

Time-resolved x-ray magnetic circular dichroism (XMCD) enables a unique spectroscopic view on complex spin and charge dynamics in multi-elemental magnetic materials. So far, its application in the soft-x-ray range has been limited to synchrotron-radiation sources and free-electron lasers. By combining a laser-driven plasma source with a magnetic thin-film polarizer, we generate up to 30% circular polarization in the soft-x-ray regime, enabling the first XMCD spectroscopy at the Fe L edges in a laser laboratory, to our knowledge. Our approach can be readily adapted to other transition metal L and rare earth M absorption edges, and with a temporal resolution of <10ps, a wide range of ultrafast magnetization studies can be realized.

Spatial distribution modulation of laser-accelerated charged particles with micro-tube structures

We present experimental studies on the spatial distribution of charged particles using a linearly polarized femtosecond laser interacting with a micro-structure target composed of micro-tube structure and planar foil. For protons, a six-lobed structure was observed in the low-energy region, while a smaller angular divergence was measured in the high-energy region. Electron distribution exhibits a circular distribution at low energies and double-lobed structure at high energies. These results are well reproduced by 3D particle-in-cell simulations, showing that the profile of electrons driven by a laser pulse is manipulated by the micro-tube structure, which maps into the spatial distribution of protons via a strong charge separation field. These results demonstrate the effect of micro-structures on laser-driven particle sources and provide a possible approach for spatial manipulation of the particle beams.

Enhanced ion acceleration from transparency-driven foils demonstrated at two ultraintense laser facilities

Laser-driven ion sources are a rapidly developing technology producing high energy, high peak current beams. Their suitability for applications, such as compact medical accelerators, motivates development of robust acceleration schemes using widely available repetitive ultraintense femtosecond lasers. These applications not only require high beam energy, but also place demanding requirements on the source stability and controllability. This can be seriously affected by the laser temporal contrast, precluding the replication of ion acceleration performance on independent laser systems with otherwise similar parameters. Here, we present the experimental generation of >60 MeV protons and >30 MeV u−1 carbon ions from sub-micrometre thickness Formvar foils irradiated with laser intensities >1021 Wcm2. Ions are accelerated by an extreme localised space charge field ≳30 TVm−1, over a million times higher than used in conventional accelerators. The field is formed by a rapid expulsion of electrons from the target bulk due to relativistically induced transparency, in which relativistic corrections to the refractive index enables laser transmission through normally opaque plasma. We replicate the mechanism on two different laser facilities and show that the optimum target thickness decreases with improved laser contrast due to reduced pre-expansion. Our demonstration that energetic ions can be accelerated by this mechanism at different contrast levels relaxes laser requirements and indicates interaction parameters for realising application-specific beam delivery.