Large Amount Of Precipitation Research Articles

Westward Migration of the Chenghai–Jinsha Drainage Divide and Its Implication for the Initiation of the Chenghai Fault

The Chenghai Fault in the Chuan–Dian block terminates at the northwestern segment of the Red River Fault, and is a significant seismogenic structure. The kinematic evolution of this fault should be closely related to the regional tectonic deformation. However, it is difficult to obtain information on structural deformation of the Chenghai Fault due to the large amount of precipitation and well-developed vegetation. The Chenghai normal faulting may drive drainage reorganization in this region, which provides a new perspective for reconstructing and evaluating the tectonic history. High-resolution digital elevation models (DEM) obtained by remote sensing greatly facilitate the study of drainage evolution and active tectonics. We use two methods (χ-plot and Gilbert metrics) to measure the drainage divide stability based on the ALOS DEM (12.5 m resolution) and further reproduce the drainage evolution process in response to the asymmetric uplift by numerical modeling. The results show that the Chenghai–Jinsha drainage divide, hosted by the footwall block of the Chenghai Fault, is migrating westward (away from the Chenghai Fault) and will continue moving ~2.2–3.5 km to reach a steady state. Its migration is controlled by the Chenghai normal faulting. The Chenghai–Jinsha drainage divide formed close to the Chenghai Fault’s surface trace and continues to migrate westward in response to the asymmetric uplift. It only took a few million years for the Chenghai–Jinsha drainage divide to migrate to its current location based on the numerical modeling. The restoration of the drainage reorganization implies that the Chenghai Fault initiated in the Pliocene, which probably results from kinematic reversal along the Red River Fault.

The Effect of Long-Term Aging on the Microstructure and Properties of a Novel Nickel-Based Powder Superalloy FGH4113A.

This study investigates the microstructural evolution and its effect on the fatigue performance of a novel nickel-based powder superalloy FGH4113A (WZ-A3) after long-term aging at 760 °C and 815 °C. The results show that long-term aging both at 760 °C and 815 °C has no significant effect on the grain size and morphology of the alloy. After aging at 760 °C for up to 2020 h, the size of the γ' phase remains unchanged, and its morphology transitions from nearly square to nearly spherical. During long-term aging at 815 °C for 440 h, γ' phase coarsening and spheroidizing occur simultaneously. With prolonged aging time, the size and spheroidization degree of the γ' phase further increase. During long-term aging up to 440 h at 760 °C, the dispersed granular MC and M6C carbides dissolve and re-precipitate. By 2020 h of aging, flocculent carbides precipitate and non-continuous M6C and M23C6 accumulate at grain boundaries. After long-term aging at 815 °C for 440 h, flocculent carbides begin to precipitate within the grains. By 2020 h of aging, a large amount of flocculent carbides precipitate with significant coarsening and enrichment of the grain boundary carbides. Due to the insignificant coarsening of the γ' phase as well as the enrichment and precipitation of the grain boundary carbides, the fatigue performance of the alloy decreases slightly after long-term aging.

Electropulsing rapidly refined the microstructure and enhanced the strength and plasticity of Cu-3.5Ti alloy

Recrystallization annealing is a necessary process for refining the grain of processed metallic materials and eliminating work hardening. However, it can cause a large amount of precipitation and coarsening of the second phase in supersaturated solid solution alloys, which is detrimental to the subsequent processing and aging processes aimed at controlling the precipitation phase. This article compared the effects of electropulsing (EPT) and conventional heat treatment (CHT) processes on the microstructure and mechanical properties of cold-rolled Cu-3.5Ti alloy. The results indicated that compared with CHT, EPT achieved full recrystallization of the alloy at a lower temperature (650 °C, 100 °C lower than CHT) and in a shorter time (10 s, 1/360 of CHT), and effectively inhibited the precipitation of β-Cu4Ti phase, resulting in a fine and uniform supersaturated solid solution. This process significantly improved both the strength and plasticity of the alloy. The yield strength, tensile strength and elongation to failure of the EPT-650 °C/10 s sample were 570 MPa, 598 MPa and 21.2 %, respectively, which were 27.8 %, 25.9 % and 19.1 % higher than those of the CHT-750 °C/1 h sample. EPT significantly increased the recrystallization nucleation rate of the alloy, while its rapid heating method inhibited the precipitation of β-Cu4Ti phase, ensuring the recrystallization process was not affected by the precipitated phase, which was the main reason for rapid recrystallization and grain refinement of Cu-3.5Ti alloy by EPT at lower temperatures and shorter time.

Variability of morphological and phenological traits in <i>Vigna unguiculata</i> (L.) Walp. accessions contrasting by growth type in different ecological and geographical conditions

Background. Cowpea (Vigna unguiculata (L.) Walp.) is a thermophilic crop that occupies the third place in the world in terms of cultivation area among leguminous crops. Vegetable cowpea cultivars are successfully cultivated in the open ground in Russia, in its southern regions and the south of the Far East. The creation of new cultivars adapted to cultivation in different regions and suitable for widespread industrial production, is extremely relevant. Materials and methods. The variability of 20 morphological and 3 phenological traits of six cowpea accessions with different growth habit types and architectonics was assessed in various ecological and geographical conditions at VIR experiment stations (in Astrakhan Province, Primorye Territory and Krasnodar Territory) in 2019-2022. The variability and interrelationships of the traits were estimated using basic and multivariate statistical methods. Results. The analysis revealed a significant influence of the factor complex (genotype/accession, research location) on the variability of traits. Phenological traits, the length of internodes and leaflets, depended most strongly on the research location. The range of variation in the number of nodes, branches, peduncles and beans per plant, stem thickness and bean size were determined by the genotype to a larger extent. The range of stem length variability was significantly influenced by the research location and the genotype, though the genotype had a stronger influence. The genotypes responded differently to changes in growing conditions. For the most of the studied accessions, an increase in the main stem length was noted in the monsoon climate conditions of the Primorye Territory, for some of them the type of growth habit changed from determinate to indeterminate. In our research, the plant length was positively correlated with the amount of precipitation and with the average relative air humidity. Excessive humidity and precipitation had minimal effect only on cv. ʻLyanchiheʼ, whose plants retained dwarfness and compact architectonics. Factor analysis (principal factors analysis) revealed 4 factors responsible for the main part of the variance of the analyzed traits. The characteristics of the leaf were combined in the first factor, those of architectonics and time of plant development in the second, features of the seedling and the juvenile stage in the third, and those of the bean in the fourth factor. These complexes of traits (factors) determined the variability of cowpea in our research. Conclusion. The performed analysis of morphological and phenological traits revealed a significant increase of stem length and changes in plant architectonics under conditions of high relative humidity and a large amount of precipitation. In some cases, even the type of growth habit was changed. The further research on the studied characters variability involving more accessions and the determination of molecular mechanisms that control stability of the growth habit type and length of the stem will allow us to proceed to a more efficient and rapid creation of new cultivars suitable for mechanized cultivation. This is extremely important for the development of new areas by cultivating species, the demand in which as a source of food and feed is increasing in the Russian Federation.

Evaluation of precipitation forecasting methods and an advanced lightweight model

Abstract Precipitation forecasting is crucial for warning systems and disaster management. This study focuses on deep learning-based methods and categorizes them into three categories: Recurrent Neural Network (RNN-RNN-RNN), Convolutional Neural Network (CNN-CNN-CNN), and CNN-RNN-CNN methods. Then, we conduct a comprehensive evaluation of typical methods in these three categories using the SEVIR precipitation dataset. The results show that RNN-RNN-RNN suffers from instability in long-term forecasts due to error accumulation, CNN-CNN-CNN struggles to capture temporal signals but produces relatively stable forecasts, and CNN-RNN-CNN significantly increases model complexity and inherits the drawbacks of RNN, leading to worse forecasts. Here, we propose an advanced lightweight precipitation forecasting model (ALPF) based on CNN. Experimental results demonstrate that ALPF can effectively forecast spatial-temporal features, maintaining CNN’s feature extraction capabilities while avoiding error accumulation in RNN’s propagation. ALPF achieves long-term stable precipitation forecasts and can better capture large precipitation amounts.

Role of cyclone activity in summer precipitation over the northern margin of Eurasia

In recent decades, the atmospheric moisture capacity has increased globally in concert with global warming, with a particularly notable warming trend in Arctic regions. However, due to limited observational data, the variation and causes of polar precipitation, especially large-scale precipitation events associated with Arctic cyclones, remain unclear. In this paper, GPM satellite data are compared with ERA5 reanalysis data to explore the characteristics of summer precipitation at the northern margin of the Eurasian region (NMER) and the influence of cyclone activity on precipitation. It is revealed that high precipitation values in the Arctic region, as indicated by the GPM and ERA5 data, are mainly concentrated at the NMER. However, the GPM data show an overall larger precipitation amount, while the station observations more closely agree with the ERA5 precipitation changes at the NMER. The cyclone identification results indicate that summer cyclones at the NMER are mainly distributed in the Barents, Kara and Laptev Seas, and the precipitation contribution rate of ERA5-derived cyclones is 37.35%, which is significantly higher than that of GPM-derived cyclones (29.47%). Furthermore, high cyclone activity results in more intense precipitation, with the top 5% of the strongest cyclones contributing 60% (GPM) and 40% (ERA5) to the total cyclonic precipitation.

A dual-mode biosensor based on CdIn2S4 hollow microsphere combined with Au@CuO/Cu2O nanozyme for sensitive detection of Sa-16S rDNA

A dual-mode biosensor used CdIn2S4 hollow microspheres as electrochemiluminescence (ECL) and photoelectrochemistry (PEC) dual signal probes combined with Au@CuO/Cu2O nano-enzyme catalysis was fabricated for sensitive detection of Sa-16S rDNA. Firstly, CdIn2S4 microspheres displayed excellent ECL and PEC signals, then the target Sa-16S rDNA introduced a large number of Au@CuO/Cu2O nanoparticles to the electrode via Exo-III amplification strategy. Au@CuO/Cu2O is a highly efficient peroxidase mimicase, and can effectively promote H2O2 to produce ·OH, which further oxidized 4-chloro-1-naphthol (4-CN) to produce a large amount of insoluble precipitate on the electrode surface, then significantly reduced the PEC and ECL signals of CdIn2S4 for target detection. This study opens up a new multifunctional photoelectric microspheres and a flexible biosensor by using CdIn2S4 and nanozymes, showing a new channel for the detection of DNA molecules and providing valuable insights for the development of PEC biosensing technologies based on nanozymes.

The Limited Effect of Reduced Typhoon Frequency on Stream Hydrochemistry in a Subtropical Forest Watershed

AbstractTropical cyclones are often accompanied by large amount of precipitation potentially impacting stream hydrochemistry. Global warming is altering typhoon disturbance regime. Little is known about how cyclone changes, especially cyclone‐frequency reduction may affect stream hydrochemistry. In this study, we compared water and nutrient input via precipitation and output via streamflow between a frequent‐typhoon period (2013–2017), with 1.2 typhoon yr−1, and a no‐typhoon period (2018–2022) at a long‐term monitoring site, the Fushan Experimental Forest of Taiwan. Precipitation and streamflow quantities were not different between the two periods because typhoons increased the fluctuation but not the mean of monthly precipitation in the major typhoon months (July–September). Inputs of Mg2+, NO3−, and SO42− via precipitation were greater in the frequent‐typhoon period than the no‐typhoon period while inputs of other ions were not different between the two periods. Only the output of Mg2+ was different between the two periods, greater in the frequent‐typhoon period. Output/input ratio of NO3− was greater in the no‐typhoon period than the frequent‐typhoon period despite the greater input in the frequent‐typhoon period, while no differences were found for others. Increases in mineralization rates due to warming is suggested to be the cause of the greater NO3− output/input ratio during the no‐typhoon period. Relationships between stream discharge and ion export were similar between the two periods both with and without removing typhoon events. The limited variation in hydrochemistry between periods of contrasting cyclone activities suggests high resilience of the undisturbed subtropical forests to changes in cyclone frequency at the decadal scale.

Vertical structures and microphysical characteristics of summer precipitation in North China detected by GPM-DPR

The vertical structure and microphysical characteristics of stratiform precipitation (SP) and convective precipitation (CP) in North China are revealed based on the GPM-DPR product during boreal summer of 2014–2021 in this study. Additionally, the differences in precipitation features between the mountain and the plain are investigated. Under the combined influence of climatic factors and local topography, the precipitation amount is larger in the plain than in the mountain while precipitation frequency exhibits an opposite pattern. The proportions of the two precipitation types are similar in the mountain and the plain, with CP contributing to approximately a quarter of total precipitation frequency. In terms of mean intensity, both SP and CP are roughly 20 % more intense in the plain than in the mountain. The greater number of light SPs is a major contributor to higher precipitation frequency in the mountain, while more intense CPs result in larger precipitation amount in the plain. Compared to the mountain, the precipitation system is deeper in the plain, where higher storm top altitudes (STAs) and larger freezing level heights contribute to more intense CPs. Besides, it is observed that for the STA, more intense CPs occur in the plain compared to the mountain. In both the mountain and the plain, the coalescence process is dominant in the low-level layers for heavy (8–20 mm/h) to storm-level (>20 mm/h) CPs. Compared to the mountain, the low-level growth of hydrometeor size and radar reflectivity is more significant in the plain. These findings are important to quantitative precipitation estimation and precipitation prediction in the mountainous region, and can help understand the influence of local topography on precipitation.

СРАВНИТЕЛЬНАЯ ОЦЕНКА СКОРОСТИ РАЗЛОЖЕНИЯ РАСТИТЕЛЬНОГО ОПАДА В ЕЛОВЫХ И СОСНОВЫХ ЛЕСАХ НА СЕВЕРНОМ ПРЕДЕЛЕ РАСПРОСТРАНЕНИЯ

A comparative assessment of the processes of the initial stages of decomposition of plant residues (pine needles, spruce needles, leaves of boreal shrubs, moss thalli) in lichen-shrub pine forests and shrub-green-moss spruce forests formed under natural conditions at the northern limit of distribution was carried out. The characteristics of the litterfall initial composition, the rate of decomposition, and changes in the chemical composition of plant residues in the process of destruction caused by the forest type were studied. The higher initial content of Corg in the plant tissues of pine forests is associated with favourable lighting conditions under the forest canopy, while the high content of Mn in the tissues of ground cover plants in spruce forests is due to the direct influence of spruce needle litterfall rich in this nutrient. The results of the study clearly demonstrated that the forest type has a significant impact both on the initial quality of the litterfall of the same plant species and on the rate of decomposition: in the spruce forest, spruce needles and lingonberry leaves with a higher content of nutrients (Mg, Mn, P) and narrow ratios of elements (C:N, C:P) were characterised by more active decomposition processes. However, green moss litter, despite its high quality in spruce forests, decomposed more actively in pine forests, which may be due to a large amount of precipitation in pine forests. Thus, differences in the rate of decomposition of plant residues are influenced by a combination of the plant material quality, temperature conditions, and precipitation amount associated with the forest type.

Co-enzymatic hydrolysis enhanced thermal stability of mayonnaise

With the accelerated pace of life, frozen bakery products and ready-to-eat hot food are gradually emerging. Mayonnaise, a commonly used flavor sauce, is also applied to these products. However, with the large amount of oil and fat precipitation of mayonnaise in the reheating process of the product, which affects its application in the food industry, the thermal stability of mayonnaise has been gradually paid attention to. In this study, the thermal stability of mayonnaise was effectively improved by the combined enzymatic hydrolysis of liquid egg yolk (LEY) with phospholipase A2 (PLA2) and flavor protease. It was found that the moderate addition of flavor protease could effectively reduce the surface hydrophobicity and interfacial tension of egg yolk protein and improve its emulsification stability. Moreover, the hydrolysis reduced the molecular weight of yolk protein, thus reducing the thermal aggregation effect of yolk protein due to heating, which in turn reduced the loss of protein at the O/W interface and improved the thermal stability of mayonnaise.

Numerical Study on the Precipitation Concentration over the Western Coast of Sumatra Island

Abstract Large amounts of tropical precipitation have been observed as significantly concentrated over the western coast of Sumatra Island. In the present study, we used a cloud-resolving model to perform 14-day numerical simulations and reproduce the distinctive precipitation distributions over western Sumatra Island and adjacent areas. The control experiment, in which the warmer sea surface temperature (SST) near the coast was incorporated and the terminal velocity and effective radius of ice clouds were parameterized to be temperature dependent, adequately reproduced the precipitation concentration as well as the diurnal cycles of precipitation. We then used the column-integrated frozen moist static energy budget equation, which is virtually equivalent to the column-integrated moisture budget equation under the weak temperature gradient assumption, to formulate sensitivity experiments focusing on the effects of coastal SST and upper-level ice clouds. Analysis of the time-averaged fields revealed that the column-integrated moisture and precipitation in the coast were significantly reduced when a cooler coastal SST or larger ice cloud particle size was assumed. Based on the comparison of the sensitivity experiments and in situ observations, we speculate that ice clouds, which are exported from inland convection that is strictly regulated by solar radiation, promote the accumulation of moisture in the coastal region by mitigating radiative cooling. Together with the moisture and heat supplied by the warm ocean surface, they contribute to the large amounts of precipitation here.

Simultaneous enhancements of strength and ductility of additively manufactured Ti-6.9Al-6.8Zr-2.3Mo-2.2V alloy by cyclic heat treatment and solution-aging

In the paper, in terms of the new developed additively manufactured Ti-6.9Al-6.8Zr-2.3Mo-2.2V alloy, different microstructural design strategies were proposed to tune the morphology and content of α phase to optimize the mechanical properties of the alloy and the corresponding deformation mechanism of the alloy were characterized and analyzed. The results show that after cyclic heat treatment and solution-aging, the best comprehensive mechanical properties (yield strength ∼ l009 MPa, and elongation ∼12%) are obtained. The better comprehensive tensile properties are attributable to the microstructure consisting 16% equiaxed αp and βt structure. The cycle heat treatment can effectively decrease the length-width ratio of lamellar α phase and improve spheroidization of primary α phase. The equiaxed primary α phase has higher ability to coordinate local plastic strain, leading to the activation of extensive prismatic <a> slip and improving the ductility of the alloy. After aging-solution, large amount of fine αs precipitate from β phase. The high hetero-deformation induced stress at αs/β interfaces in βt structure promotes the activation of the pyramidal <a> slip systems, thereby increasing the yield strength. The present findings provide significant guidance for additive manufactured titanium alloy having good combination of tensile ductility and strength.

북한지역 작전 시 지형적 난점을 고려한 군수지원 발전방향

Due to climate change, the temporal expansion of Rasputica is having a great influence on the operation of Army. The Korean military should analyze the possibility of occurrence of topographical difficulties in consideration of climate change on the Korean Peninsula. In this paper, the possibility of Rasputica occurrence was considered by comparing and analyzing the topographic and meteorological factors of Russia and Ukraine, and the Hwanghaebukdo and Pyongannamdo, and the direction of development of logistics support for the Korean military was discussed. The two regions are important areas of the Korean military in case of emergency, with wide plains and major cities located. As a result of the analysis, the area showed some similar characteristics to that of the Ukrainian region. Alluvial soil and deep mud soil are mainly formed on a wide plain, and drainage is insufficient, and if conditions such as a large amount of precipitation and temperature are satisfied, there is a possibility of causing Rasputica. The direction of overcoming topographic difficulties in terms of logistics support was considered by using railroads, roads, and water transportation.

Primary study on the effects and mechanisms of separate and combined decoctions of Scutellaria baicalensis Georgi - Coptis chinensis Franch extracts in relieving acute alcoholic liver injury in rats

Ethnopharmacological relevanceScutellaria baicalensis Georgi (SBG) and Coptis chinensis Franch (CCF) are traditional herbal medicine pairs used for clearing heat and eliminating dampness, stopping diarrhea, and detoxification. Traditionally, these two herbs are combined and decocted together, but the modern preparation procedures separate them to avoid the large amount of precipitation generated from co-decoction. Thus, a conflict lies between the traditional and modern extraction processes of Scutellaria baicalensis Georgi - Coptis chinensis Franch (SBG-CCF). Aim of studyThere is a conflict between traditional medical practices of SBG-CCF and the modern formulation industry. In this study, we investigated the differences in the effects and mechanisms of SBG-CCF extracted by decocting separately and combining decoctions, as well as the scientific effectiveness of traditional and modern treatment methods on both. Acute alcoholic liver injury (ALI) rats were used as the pathological model. Materials and methodsSD rats were divided into 8 groups, including blank group, model group, low, medium, and high dose groups of SBG-CCF separated decoction, low, medium, and high dose groups of SBG-CCF combined decoction. Acute alcoholic liver injury model was induced in rats by gradually increasing the dose of alcohol through gavage everyday using white wine with an alcohol content 52%. Aspartate aminotransferase (AST), alanine aminotransferase (ALT), total cholesterol (TC), triglyceride (TG), lactate dehydrogenase (LDH), malondialdehyde (MDA), superoxide dismutase (SOD), and reduced glutathione (GSH) were used as indicators to assess the intervention effect of SBG-CCF. And the potential active ingredients of SBG-CCF and the targets related to ALI were screened using network pharmacology, and the prediction results of network pharmacology were verified by quantitative real-time fluorescence PCR (qRT-PCR). ResultsSBG-CCF decoction alone and six combinations of decoctions have different degrees of improvement on alcoholic liver injury, with significant efficacy in the middle-dose group, and the combined decoction was superior to the individual decoction. SBG-CCF gavage can reduce the activity of AST, ALT, TC, TG, LDH, and MDA in the serum and liver of ALI rats, while increasing the levels of SOD and GSH. Network pharmacological analysis identified 39 active components, mainly flavonoids and alkaloids. Enrichment analysis suggested that SBG-CCF may treat ALI through the regulation of tumor necrosis factor (TNF), mitogen-activated protein kinase (MAPK), interleukin-17 (IL-17), apoptosis, and the Toll-like receptor signaling pathways. The key targets in the Disease-Signaling Pathway-Target Network were MAPK8, IKBKB, MAPK10, MAPK3, MAPK1, and AKT1. qRT-PCR results indicated that targets regulating inflammation and lipid metabolism are MAPK8, MAPK10, MAPK3, and AKT1. ConclusionSBG-CCF separately extracts and combines decoction can alleviate acute alcoholic liver injury, and the effect of combined decoction is more significant than separate decoction, implying that the precipitate produced by the combination of the two is also an active substance. The resistance mechanism of SBG-CCF ALI may be related to the modulation of lipid metabolism, inhibition of lipid peroxidation, and oxidative stress. SBG-CCF has the characteristics of multi-component, multi-pathway, and multi-target resistance to ALI.

Experimental Investigation of Compressive Concrete with Different Immersion Times and Its Stochastic Damage Model

Continuous large amounts of precipitation can lead to a rapid increase in the water content of concrete in village building foundations, which can adversely affect the mechanical properties, such as the compressive strength of concrete. There are few experimental studies on the compressive stochastic mechanical properties of concrete in the wet state after considering different soaking times (different water contents and saturations), but there is no corresponding stochastic damage principal structure model. In this study, the mechanical properties of concrete under different immersion times were tested to obtain the mechanical properties of the concrete degradation law, and the random damage intrinsic model of wet concrete was established. The results of this paper were compared with the classical test results from the literature to verify the validity of the model. The results show that the proposed stochastic damage model is able to consider both the effects of the saturation and the damage behavior of wet concrete under compression, which is beneficial to the structural design and maintenance protection of village buildings in areas with abundant precipitation.

Forest cover and watering of the Pripyat River basin

The paper deals with the issues of the influence of forest cover on the average annual runoff of rivers in the Pripyat River basin. In the study area, under the influence of solar radiation, the temperature of the air and the soil surface increases, evaporation from the water surface also increases, and the moisture content of the upper layers of the soil decreases. In general, with an increase in forest cover, the annual layer of the runoff of the studied rivers increases, as well as with an increase in the amount of precipitation (in contrast to the runoff of short-term floods). However, with a forest cover of more than 20%–30% and a relatively small amount of precipitation, the runoff decreases, which is associated with the retention of part of the precipitation by the forest cover. With a large amount of precipitation and low forest cover, the runoff also decreases, which is probably due to the loss of precipitation water for evaporation, etc. The conducted studies show that, just as the forest affects water resources, the flow of moisture to watersheds also affects the state of forest systems. Moreover, this interaction is expressed by evaporation from forests. Under influence of change of a climate growth of evaporation is observed.

Analyzing the role of climatic factors in the driver—vehicle—road—environment system

Climate peculiarities affect road performance and, consequently, vehicle operating conditions. The autumn-winterspring period is characterized by sharp air temperature fluctuations within 0...± 4 °C, large amounts of precipitation, high air humidity, thaws, icing, which are a concomitant factor of accidents on the roads. The analysis of road accident statistics showed that in the transitional periods of fall-winter and winter-spring there are localized spikes in the number of accidents. During the analysis it was revealed that the increase in the number of accidents in the transition period falls on the so-called "critical" month, characterized by air temperature spikes in the range of 0...±4 °C and heavy precipitation. Keywords WADS system; climatic zones of the Russian Federation; factors of the subsystem "environment"; accident statistics; winter road maintenance

HUMU CONTENT IN THE SOILS OF THE LOW ZONE OF THE TRANSCARPATHIAN REGION

On the basis of research carried out in the XI round of ecological and agrochemical certification, the humus condition of the soils of the lowland zone of the Zakarpattia region is shown.Qualitative and quantitative changes in soil properties and the content of humus and nutrients in it are influenced by long-term and systematic soil cultivation, application of mineral fertilizers, chemical land reclamation, as well as the introduction of crop rotation. In recent years, almost a third of the "golden" reserves of humus have been lost from the bank of national soil fertility in Ukraine. Every five years, the soils of Ukraine lose 0.04% - 0.05% of humus, that is, 300 - 350 kg disappear in one year [1]. The main accumulator of soil energy, the regulator of the water-absorbing capacity of the soil, its biological activity is the organic substance - humus. Therefore, the content, reserves and qualitative condition of humus are among the important indicators, the level of which depends on almost all the agronomically valuable properties of the soil. The growth of humus content is a long-term process, and its decrease is extremely fast. The problem of humus is extremely important for the soils of Transcarpathia, as a large amount of precipitation (more than 700 mm per year) contributes to its leaching. In addition, meager rates of organic fertilizers, due to the decrease in livestock, do not compensate for the removal of humus from the soil. Key words: soils, humus, biologization, agrochemical certification, lowland zone

Determination of Impacts of Climate Change on Temperature and Rainfall Variations in Some Southern Iraqi Governorate Using GIS

The concept of temperature change is closely related to climate change. Global warming is one of its most prominent manifestations, and the effects of this will be significant on the climate. It will lead to an increase in the intensity of the air cycle, the encroachment of climatic regions towards the poles, an increase in the frequency of extreme weather phenomena, a change in the distribution of heat and rain in different cities of the world, and a rise in sea levels and the threat of most coastal areas. The research aims to determine the variation in temperature, the amount of rain, and its distribution system in the (Basra, Thi Qar, and Missan) during the period (1998 – 2020), and diagnosis of changes in temperature, rain amount, and their cause, as well as its distribution system by analyzing the trend of change in the annual averages of temperature and annual rainfall amounts for the same study period. The results of spatial analysis using GIS for monthly temperature average data for the same period indicated that the general trend of temperature distribution in all study stations is high, and the peaks during the months (June, July, August, and September), where we notice a large and clear increase, especially in recent years, if compared with rates in previous years. As for the rain data analysis in Iraq, the study found that it was limited to five months (Nov., Dec., Jan., March, April), and October month, which represents the beginning of the rainy season in most monitoring stations, and the month of March, which represents its end, did not record any amount of rain, and this means that the depressions which Iraq exposed to during these two months are unable to produce heavy amounts of the rain because of their shallowness, from the spatial distribution of the amount of rain in the study area that the rainfall rates are reduced to the highest level and its irregular distribution, and therefore reflected in the decrease in water resources in the areas under study. A large amount of daily precipitation in Iraq is due to the recurrence of three atmospheric depressions the (Mediterranean, combined, and Sudanese) depression. These responsible depressions are distinguished by their differences from one region to another, the short duration of their stay and recurrence, the weather conditions that dominate them, and the pressure patterns accompanying them in the upper atmosphere layers. Or some of these depressions reach dryness or are accompanied by non-rainy clouds. This makes Iraq’s rains few, leading to many repercussions on climate, the environment, humans, and various activities.