Large Surface Area Research Articles

Pore Fractal Characteristics between Marine and Marine–Continental Transitional Black Shales: A Case Study of Niutitang Formation and Longtan Formation

Marine shales from the Niutitang Formation and marine–continental transitional shales from the Longtan Formation are two sets of extremely important hydrocarbon source rocks in South China. In order to quantitatively compare the pore complexity characteristics between marine and marine–continental transitional shales, the shale and kerogen of the Niutitang Formation and the Longtan Formation are taken as our research subjects. Based on organic petrology, geochemistry, and low-temperature gas adsorption analyses, the fractal dimension of their pores is calculated by the Frenkel–Halsey–Hill (FHH) and Sierpinski models, and the influences of total organic carbon (TOC), vitrinite reflectance (Ro), and mineral composition on the pore fractals of the shale and kerogen are discussed. Our results show the following: (1) Marine shale predominantly has wedge-shaped and slit pores, while marine–continental transitional shale has inkpot-shaped and slit pores. (2) Cylindrical pores are common in organic matter of both shale types, with marine shale having a greater gas storage space (CRV) from organic matter pores, while marine–continental transitional shale relies more on inorganic pores, especially interlayer clay mineral pores, for gas storage due to their large specific surface area and high adsorption capacity (CRA). (3) The fractal characteristics of marine and marine–continental transitional shale pores are influenced differently. In marine shale, TOC positively correlates with fractal dimensions, while in marine–continental shale, Ro and clay minerals have a stronger influence. Ro is the primary factor affecting organic matter pore complexity. (4) Our two pore fractal models show that the complexity of the shale in the Longtan Formation surpasses that of the shale in the Niutitang Formation, and type I kerogen has more complex organic matter pores than type III, aiding in evaluating pore connectivity and flow effectiveness in shale reservoirs.

Non-Enzymatic Glucose Detection by Fe2O3 Nanorods-Reduced Graphene under Physiological pH

Background: Non-enzymatic detection has become a research hotspot because of its alternativity in solving problems compared to enzymatic biosensors, but most of those sensors require a strong basic pH environment (higher than 10) to active their surface, restricting their use in clinical detection because the pH of body fluid is around 7.4. Furthermore, metal oxide sensors with specific morphologies are reported to have a fast electrocatalytic response. Therefore, Fe2O3 nanocomposites with porous structure are selected for glucose detection research in a physiological pH environment. Objective: The study aimed to assess the potential use of porous reduced graphene oxide-Fe2O3 nanorods in glucose detection in a physiological pH environment. Method: Hydrothermal method was used to prepare porous Fe2O3-rGO NRs (Nanorods) and hollow Fe2O3/C nanoparticles. Cyclic voltammetry and electrochemical impedance spectroscopy were used to evaluate the performance of our materials. Results: Porous-reduced graphene oxide-Fe2O3 nanorods have exhibited better performance than hollow carbon-Fe2O3 core-shell nanoparticles for glucose detection in a physiological pH environment. Conclusion: Non-enzymatic glucose sensing based upon cavity Fe2O3-rGO NRs under a physiological pH environment has been successfully realized, attributing to their high electron mobility and large specific surface area. Furthermore, the results of this work indicate that the glucose sensor prepared here has shown good repeatability and stability, which suggests its potential use in clinical detection.

Mesoporous hollow Fe4[Fe(CN)6)]3 hierarchical nanocrystal architecture for advanced sodium-ion batteries

Prussian blue (PB) has been broadly recognized as promising cathode materials for sodium-ion batteries (SIBs) due to its large interstitial space and robust frame structure, whereas their applications are impeded by unsatisfied long-term cyclability and poor rate capability due to its inherent lattice defects. Herein, we report to fabricate the mesoporous hollow Fe4(Fe(CN)6)3 (one kind of PB) hierarchical nanocrystal architecture by the hydrothermal crystallization and HCl etching of the mesoporous precursor Fe4[Fe(CN)6]3 cubic particles, leading to high crystallinity and large specific surface area. The resultant Fe4[Fe(CN)6]3 cathode for SIBs exhibits a good reversibility and cycling stability with a capacity retention of 75.6 % at 0.5 C after 200 cycles as well as superb rate capability featuring a stable discharge specific capacity of 30.2 mAh g−1 at as high as 10 C, demonstrating the fast kinetics and low polarization of electrochemical reaction, which might be ascribed to the unique architecture and high crystallinity. This offers a new route to designing PB cathode of for SIBs with high rate capabilities.

Direct Affinity Ligand Immobilization onto Bare Iron Oxide Nanoparticles Enables Efficient Magnetic Separation of Antibodies.

Magnetic separation is a promising alternative to chromatography for enhancing the downstream processing (DSP) of monoclonal antibodies (mAbs). However, there is a lack of efficient magnetic particles for successful application. Aiming to fill this gap, we demonstrate the suitability of bare iron oxide nanoparticles (BION) with physical site-directed immobilization of an engineered Protein A affinity ligand (rSpA) as an innovative magnetic material. The rSpA ligand contains a short peptide tag that enables the direct and stable immobilization onto the uncoated BION surface without commonly required laborious particle activation. The resulting BION@rSpA have beneficial characteristics outperforming conventional Protein A-functionalized magnetic particles: a simple, fast, low-cost synthesis, a particle size in the nanometer range with a large effective specific surface area enabling large immunoglobulin G (IgG) binding capacity, and a high magnetophoretic velocity advantageous for fast processing. We further show rapid interactions of IgG with the easily accessible rSpA ligands. The binding of IgG to BION@rSpA is thereby highly selective and not impeded by impurity molecules in perfusion cell culture supernatant. Regarding the subsequent acidic IgG elution from BION@rSpA@IgG, we observed a hampering pH increase caused by the protonation of large iron oxide surfaces after concentrating the particles in 100 mM sodium acetate buffer. However, the pH can be stabilized by adding 50 mM glycine to the elution buffer, resulting in recoveries above 85% even at high particle concentrations. Our work shows that BION@rSpA enable efficient magnetic mAb separation and could help to overcome emerging bottlenecks in DSP.

Application of nanoparticles as novel adsorbents in blood purification strategies.

Blood purification therapy for patients overloaded with metabolic toxins or drugs still needs improvement. Blood purification therapies, such as in hemodialysis or peritoneal dialysis can profit from a combined application with nanoparticles. In this review, the published literature is analyzed with respect to nanomaterials that have been customized and functionalized as nano-adsorbents during blood purification therapy. Liposomes possess a distinct combined structure composed of a hydrophobic lipid bilayer and a hydrophilic core. The liposomes which have enzymes in their aqueous core or obtain specific surface modifications of the lipid bilayer can offer appreciated advantages. Preclinical and clinical experiments with such modified liposomes show that they are highly efficient and generally safe. They may serve as indirect and direct adsorption materials both in hemodialysis and peritoneal dialysis treatment for patients with renal or hepatic failure. Apart from dialysis, nanoparticles made of specially designed metal and activated carbon have also been utilized to enhance the removal of solutes during hemoadsorption. Results are a superior adsorption capacity and a good hemocompatibility shown during treatment of patients with toxication or end-stage renal disease. In summary, nanomaterials are promising tools for improving the treatment efficacy of organ failure or toxication. KEY MESSAGES The pH-transmembrane liposomes and enzyme-loaded liposomes are two representatives of liposomes with modified aqueous inner core which have been put into practice in dialysis. Unmodified or physiochemically modified liposomal bilayers are ideal binders for lipophilic protein-bound uremic toxins or cholestatic solutes, thus liposome-supported dialysis could become the next-generation hemodialysis treatment of artificial liver support system. Novel nano-based sorbents featuring large surface area, high adsorption capacity and decent biocompatibility have shown promise in treatment of uremia, hyperbilirubinemia, intoxication, and sepsis. A major challenge of production lies in avoiding changes in physical and chemical properties induced by manufacturing and sterilizing procedures.

One-Pot Preparation of Mixed-Mode Reversed-Phase Anion-Exchange Silica Sorbent and its Application in the Detection of Cyclopiazonic Acid in Feeds and Agricultural Products.

A novel co-bonded octyl and pyridine silica (OPS) sorbent was prepared and applied for the solid phase extraction (SPE) of cyclopiazonic acid (CPA, a type of mycotoxin) in feed and agricultural products for the first time. A simple mixed-ligand one-pot reaction strategy was employed for OPS sorbent preparation. Nitrogen adsorption-desorption measurements, elemental analysis (EI), thermal gravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FT-IR) analysis demonstrated the successful immobilization of octyl and quaternary ammonium groups onto the surface of silica gel. The large specific surface area, high-density functional groups, and mixed-mode anion-exchange characteristics of these silica particles made them the ideal material for the efficient extraction of CPA. Additionally, the OPS sorbents displayed excellent batch-to-batch reproducibility, satisfactory reusability, and low cost. The SPE parameters were optimized to explore the ionic and hydrophobic interactions between CPA and the functional groups, and the ultra-high performance liquid chromatography coupled with triple-quadrupole tandem mass spectrometry (UPLC-MS/MS) parameters were optimized to obtain a desirable extraction efficiency and high sensitivity to CPA. Meanwhile, the OPS sorbent presented a satisfactory extraction selectivity and low matrix effect. Under the optimized conditions, our developed CPA detection method was used to determine CPA level in rice, wheat flour, corn flour, peanut, and feed samples, exhibiting a lower detection limit, better linearity, higher sensitivity, and satisfactory extraction recovery rate than previously reported methods. Therefore, our method can be preferentially used as a method for the detection of CPA in agricultural products and feeds.

Metal-Organic Framework for Aluminum based Energy Storage Devices: Utilizing Redox Additives for Significant Performance Enhancement.

There are various methods being tried to address the sluggish kinetics observed in Al-ion batteries (AIBs). They mostly deal with morphology tuning, but have led to limited improvement. A new approach is proposed to overcome this limitation. It focuses on the use of a redox additive modified electrolyte in combination with framework like materials, which have wider channels. The ordered microporous and interconnected framework of ZIF 67, with large surface area, effectively facilitates the diffusion of aluminum ions. Therefore, AIBs are able to exhibit a superior discharge capacity of 288 mAh g-1 at 0.2 A g-1 current density with robust cycling stability. The addition of potassium ferricyanide as a redox-active species in an aqueous solution of aluminum chloride (supporting electrolyte) leads to significant enhancement in the specific capacity with much higher cycling stability. Al-ion based BatCap devices can be assembled by using ZIF 67 as the cathode, ZIF 67 derived porous carbon as the anode, and a redox additive modified electrolyte. The BatCap device exhibits excellent energy density of 86 Wh kg-1 at a power density of 2 KW kg-1, which is higher than reported aqueous AIBs. The ex situ characterization clearly explains the unexplored mechanism of redox additives in AIBs.

Developments of photo‐/electro‐catalysis based on covalent organic frameworks: A review

AbstractPhoto‐/electro‐catalysis has the characteristics of low cost, high performance, and zero pollution, which meet the policies on environment and energy. Covalent organic frameworks (COFs), a type of crystalline organic skeleton polymers, have been widely applied and investigated in the area of photo‐/electro‐catalysis owing to their advantages of large specific surface area, regular pore size, excellent stability, flexible structural design, and massive active sites. This article reviews the structural characteristics of COFs and the strategies for strengthening the photo‐/electro‐catalytic activity of COF materials. Subsequently, deep insights were put into the photo‐/electro‐catalysis application of COF materials. In the end, the development prospects and challenges faced by COF materials in photo‐/electro‐catalysis are discussed.

Nanosized Tungsten Powder Synthesized Using the Nitridation–Decomposition Method

A facile, one-step nitridation–decomposition method was developed for the synthesis of nanosized tungsten powder with a high surface area. This approach involved the nitridation of WO3 in NH3 to form mesoporous tungsten nitride (W2N), followed by in situ decomposition of W2N to directly yield single-phase W particles. The phase and morphology evolution during the synthesis were systematically investigated and compared with the carbothermal reduction of WO3. It was revealed that powdered tungsten product with single-phase particles was obtained after nitridation at 800 °C combined with in situ decomposition at 1000 °C, displaying an average particle size of 15 nm and a large specific surface area of 6.52 m2/g. Furthermore, the proposed method avoided the limitations associated with intermediate phase formation and coarsening observed in carbothermal reduction, which resulted in the growth of W particles up to ~4.4 μm in size. This work demonstrates the potential of the nitridation–decomposition approach for the scalable and efficient synthesis of high-quality, fine-grained tungsten powder.

Enhanced photocatalytic activity of porous TiO2 containing C/P/K derived from grapefruit peel.

Grapefruit peel possesses a porous structure and a significant specific surface area. In this study, we introduce an innovative and eco-friendly approach for synthesizing porous TiO2. This was accomplished by employing grapefruit peel as a bio-template and tetrabutyl titanate as the precursor, utilizing a two-step rotary impregnation-calcination process. The TiO2 faithfully reproduced the structural characteristics of the grapefruit peel across different scales, simultaneously incorporating C, P, K elements from the original grapefruit peel into the final samples. The fabricated samples were analyzed using XRD, XPS, SEM, TEM, BET, and UV-vis DRS. The results showed that the TiO2 displays an anatase phase, and possesses a high specific surface area. The investigation of photocatalytic performance demonstrated that the CPK-TiO2-10 sample exhibited outstanding photocatalytic activity against Rhodamine B (RhB) solution, achieving complete degradation within 60 minutes. Additionally, the total organic carbon (TOC) removal rate reached 91.34% after 60 minutes of irradiation. The sample maintained a high degradation efficiency, even after five recycling cycles. This exceptional performance can be attributed to its porous structure, enriched with pores and a larger surface area, as well as the beneficial effects of doping with C, P, K elements in TiO2.

LDH-Based Voltammetric Sensors.

Layered double hydroxides (LDHs), also named hydrotalcite-like compounds, are anionic clays with a lamellar structure which have been extensively used in the last two decades as electrode modifiers for the design of electrochemical sensors. These materials can be classified into LDHs containing or not containing redox-active centers. In the former case, a transition metal cation undergoing a reversible redox reaction within a proper potential window is present in the layers, and, therefore, it can act as electron transfer mediator, and electrocatalyze the oxidation of an analyte for which the required overpotential is too high. In the latter case, a negatively charged species acting as a redox mediator can be introduced into the interlayer spaces after exchanging the anion coming from the synthesis, and, again, the material can display electrocatalytic properties. Alternatively, due to the large specific surface area of LDHs, molecules with electroactivity can be adsorbed on their surface. In this review, the most significant electroanalytical applications of LDHs as electrode modifiers for the development of voltammetric sensors are presented, grouping them based on the two types of materials.

Porous Organic Framework Materials (MOF, COF, and HOF) as the Multifunctional Separator for Rechargeable Lithium Metal Batteries.

The separator is an important component in batteries, with the primary function of separating the positive and negative electrodes and allowing the free passage of ions. Porous organic framework materials have a stable connection structure, large specific surface area, and ordered pores, which are natural places to store electrolytes. And these materials with specific functions can be designed according to the needs of researchers. The performance of porous organic framework-based separators used in rechargeable lithium metal batteries is much better than that of polyethylene/propylene separators. In this paper, thethree most classic organic framework materials (MOF, COF, and HOF) are analyzed and summarized. The applications of MOF, COF, and HOF separators in lithium-sulfur batteries, lithium metal anode, and solid electrolytes are reviewed. Meanwhile, the research progress of these three materials in different fields is discussed based on time. Finally, in the conclusion, the problems encountered by MOF, COF, and HOF in different fields as well as their future research priorities are presented. This review will provide theoretical guidance for the design of porous framework materials with specific functions and further stimulate researchers to conduct research on porous framework materials.

High carbon dioxide emissions from Australian estuaries driven by geomorphology and climate

Estuaries play an important role in connecting the global carbon cycle across the land-to-ocean continuum, but little is known about Australia’s contribution to global CO2 emissions. Here we present an Australia-wide assessment, based on CO2 concentrations for 47 estuaries upscaled to 971 assessed Australian estuaries. We estimate total mean (±SE) estuary CO2 emissions of 8.67 ± 0.54 Tg CO2-C yr−1, with tidal systems, lagoons, and small deltas contributing 94.4%, 3.1%, and 2.5%, respectively. Although higher disturbance increased water-air CO2 fluxes, its effect on total Australian estuarine CO2 emissions was small due to the large surface areas of low and moderately disturbed tidal systems. Mean water-air CO2 fluxes from Australian small deltas and tidal systems were higher than from global estuaries because of the dominance of macrotidal subtropical and tropical systems in Australia, which have higher emissions due to lateral inputs. We suggest that global estuarine CO2 emissions should be upscaled based on geomorphology, but should also consider land-use disturbance, and climate.

Multiple-component covalent organic frameworks for simultaneous extraction and determination of multitarget pollutants in sea foods

Persistent organic pollutants (POPs), such as perfluoroalkyl and polyfluoroalkyl substances (PFASs), polychlorinated biphenyls (PCBs), and bisphenols (BPs), have been raising global concerns due to their toxic effects on environment and human health. The monitoring of residues of POPs in seafood is crucial for assessing the accumulation of these contaminants in the study area and mitigating potential risks to human health. However, the diversity and complexity of POPs in seafood present significant challenges for their simultaneous detection. Here, a novel multi-component fluoro-functionalized covalent organic framework (OH-F-COF) was designed as SPE adsorbent for simultaneous extraction POPs. On this basis, the recognition and adsorption mechanisms were investigated by molecular simulation. Due to multiple interactions and large specific surface area, OH-F-COF displayed satisfactory coextraction performance for PFASs, PCBs, and BPs. Under optimized conditions, the OH-F-COF sorbent was employed in a strategy of simultaneous extraction and stepwise elution (SESE), in combination with HPLC−MS/MS and GC−MS method, to effectively determined POPs in seafood collected from coastal areas of China. The method obtained low detection limits for BPs (0.0037 −0.0089 ng/g), PFASs (0.0038 −0.0207 ng/g), and PCBs (0.2308 −0.2499 ng/g), respectively. This approach provided new research ideas for analyzing and controlling multitarget POPs in seafood. Environmental implicationsPersistent organic pollutants (POPs), such as perfluoroalkyl and polyfluoroalkyl substances (PFASs), polychlorinated biphenyls (PCBs), and bisphenols (BPs), have caused serious hazards to human health and ecosystems. Hence, there is a need to develop a quantitative method that can rapidly detect POPs in environmental and food samples. Herein, a novel multi-component fluorine-functionalized covalent organic skeletons (OH-F-COF) were prepared at room temperature, and served as adsorbent for POPs. The SESE-SPE strategy combined with chromatographic techniques was used to achieve a rapid detection of POPs in sea foods from the coastal provinces of China. This method provides a valuable tool for analyzing POPs in environmental and food samples.

Sub-nanopores enabling optimized ion storage performance of carbon cathodes for Zn-ion hybrid supercapacitors

Aqueous Zn-ion hybrid supercapacitors (ZHSs) are attracting significant attention as a promising electrochemical energy storage system. However, carbon cathodes of ZHSs exhibit unsatisfactory ion storage performance due to the large size of hydrated Zn-ions (e.g., [Zn(H2O)6]2+), which encumbers compact ion arrangement and rapid ion transport at the carbon-electrolyte interfaces. Herein, a porous carbon material (HMFC) with abundant sub-nanopores is synthesized to optimize the ion storage performance of the carbon cathode in ZHSs, in which the sub-nanopores effectively promote the dehydration of hydrated Zn-ions and thus optimize the ion storage performance of the carbon cathode in ZHSs. A novel strategy is proposed to study the dehydration behaviors of hydrated Zn-ions in carbon cathodes, including quantitatively determining the desolvation activation energy of hydrated Zn-ions and in-situ monitoring active water content at the carbon-electrolyte interface. The sub-nanopores-induced desolvation effect is verified, and its coupling with large specific surface area and hierarchically porous structure endows the HMFC cathode with improved electrochemical performance, including a 53 % capacity increase compared to the carbon cathode counterpart without sub-nanopores, fast charge/discharge ability that can output 46.0 Wh/kg energy within only 4.4 s, and 98.2 % capacity retention over 20,000 charge/discharge cycles. This work provides new insights into the rational design of porous carbon cathode materials toward high-performance ZHSs.

Incorporating ZIF-8-derived ZnSe into hollow carbon nanospheres as anodes for lithium-ion batteries

Transition metal selenides (TMSs) show great potential as anode materials for lithium-ion batteries (LIBs), boasting a high theoretical capacity. Nevertheless, their practical utility faces challenges, mainly stemming from significant volume changes that lead to rapid capacity decay during charge and discharge cycles. To overcome this challenge, we present a systematic approach involving the growth of uniformly dispersed ultrafine ZnSe nanoparticles derived from ZIF-8 on the surface of hollow carbon nanospheres (ZnSe@N-HCS/700). When utilized as an anode material for LIBs, the ZnSe@N-HCS/700 electrode demonstrates exceptional electrochemical performance. Specifically, it achieves a capacity of 1299 mAh g−1 after 100 cycles at a current density of 100 mA g−1 and maintains a capacity of 614 mAh g−1 even after 1800 cycles at 2500 mA g−1. The hollow structure of the composite alleviates the volume variation of ZnSe nanoparticles during charge and discharge processes, and provides a large reactive surface area, thereby significantly enhancing lithium storage capacity. In conclusion, our strategy presents an innovative approach to synthesize negative electrode materials with unique structures for LIBs.

Preparation of Heterogeneous Fenton Catalysts Cu-Doped MnO2 for Enhanced Degradation of Dyes in Wastewater.

Herein, a series of heterogeneous Fenton catalysts, Cu doped MnO2 (CDM), with different Cu/Mn molar ratios were prepared via a hydrothermal reaction. Meanwhile, detailed characterizations were used to study the structures of CDM, and it is amazing that the morphology of CDM changed from nanowires to nanoflowers with an increasing amount of Cu doped. Apart from this, both the specific surface area and oxygen vacancy increased obviously with the increasing Cu/Mn molar ratio. Then, the degradation of different dyes was utilized to evaluate the catalytic activity of different CDM with H2O2 used as the oxidizing agent, and the 50%-CDM with the highest content of Cu doped displayed the best catalytic activity. Herein, the degradation efficiency (D%) of Congo red (CR) solution with low concentration (60 mg/L) reached 100% in 3 min, while the D% of CR solution with a high concentration (300 mg/L) reached 99.4% after 5 min with a higher dosage of H2O2. Additionally, the 50%-CDM also displayed excellent reusability, for which the D% values were still higher than 90% after the 14th cycles. Based on the structure characteristics and mechanism analysis, the excellent catalytic capacity of 50%-CDM was due to the combined influence of large specific surface area and abundant oxygen vacancy. Thus, a promising heterogeneous Fenton catalyst was developed in this study, which proved the treatment efficiency of actual dye wastewater.

Polyoxometalate coupled polymers induced molybdenum phosphide with large surface area for efficient hydrogen evolution

Developing highly active hydrogen evolution reaction (HER) electrocatalysts possesses great significance for the green renewable energy conversion and storage. Here, through the electrostatic attraction between polyoxometalate (PMo12) and ammonium polyphosphate (APP) and the coordination with polyallylamine hydrochloride (PAH), the precursor was constructed, and then nitrogen-doped graphite carbon layer-coated MoP active particles (MoP@NC) were successfully prepared by high temperature carbonization. For HER, the overpotential of η10 for MoP@NC is 119 and 126 mV in acidic and alkaline electrolyte. Furthermore, in alkaline solution, when the current density reaches a certain degree (≥110 mA cm−2), the hydrogen production activity of the catalysts are the same as that of the industrial Pt/C catalysts, or even have a slight advantage. The synergistic interaction of active particles (MoP) and graphitic carbon layers and high specific surface area ensure the excellent activity of HER. N-doped porous carbon layers also protect MoP@NC working for 24 h. Moreover, the catalysts prepared in the same experimental environment with ammonium molybdate as metal source also showed good HER performance in acidic and alkaline environments. This study opens a general way to develop earth-rich Mo-based phosphide electrocatalysts with high activity for hydrolysis applications.

MOF-on-MOF-derived Fe[sbnd]Zr bimetal oxides supported on hierarchically porous carbonized wood to promote photo-Fenton degradation of ciprofloxacin

MOF-on-MOF derivatives have served as promising heterogeneous Photo-Fenton (hetero-PF) catalysts, but its self-aggregation instability and limited photocatalytic activity inhibit the effective ciprofloxacin (CIP) removal. In this study, a novel hetero-PF catalyst, dual MOF-derived FeZr bimetal oxide embedded in a wood-converted porous carbon skeleton (ZrO2@Fe3O4/WPC), was successfully synthesized via a straightforward in-situ growth strategy combined with co-pyrolysis. The as-prepared hybrid photocatalysts, featuring a large surface area, effective porous structures, efficient light absorption and a narrow band gap demonstrated superior photo-Fenton activity, accomplishing approximately 99.1 % degradation of CIP within 120 min under neutral conditions. Furthermore, the ZrO2@Fe3O4/WPC hetero-PF system showed satisfactory performance in treating real water matrices. It can be inferred that the abundant heterojunctions, resulting from the synergistic effect of FeZr mixed oxide and the porous carbonized wood substrate, contributed to the rapid separation and migration of photogenerated electron-hole pairs. Meanwhile, the FeZr site in the graphitized carbon framework activates H2O2 to accelerate the generation of the OH and O2− radicals, leading to a heightened degradation efficiency of CIP. Besides, the photodegradation pathway of CIP is obtained by liquid chromatography-mass spectrometry (LC-MS). This study indicates that combining porous carbonized wood and heterometallic MOF derived materials provides a promising method for realizing high-efficiency photo-Fenton degradation of antibiotic water pollutions.

Electrical conductivity enhancement of rGO-MoS2 composite electrode for inverted PSC by parameter optimization

Carbon-based electrodes are widely used in photovoltaic, metal-ion batteries, supercapacitors, and sensors due to their low ohmic resistance and ability to integrate modifiers. Reduced graphene oxide (rGO) represents a promising alternative to graphite in carbon-based electrodes because of its high electrical conductivity, large surface area, and robust mechanical properties. This study aimed to optimize the fabrication parameters of rGO-MoS2 composite electrodes prepared via a one-pot hydrothermal method, focusing on maximizing their electrical conductivity for potential electronic applications. Taguchi analysis was employed to evaluate the impact of three key factors: rGO-MoS2 mixing ratio, annealing temperature, and annealing time. The novelty of this work lies in the systematic optimization approach using the Taguchi method, which allowed for the identification of the most significant factors and their optimal levels. The optimal combination was found to be a 1:1 ratio, 75 °C annealing temperature, and 15-min annealing time, resulting in an impressive electrical conductivity of 11 800 S m⁻1. This optimized rGO-MoS2 composite electrode exhibited an approximate 11 % reduction in sheet resistance compared to the unoptimized composite. Furthermore, all samples show an improvement in sheet resistance values compared to pure rGO and MoS2, which were 82.5 Ω/sq and 48.9 Ω/sq. Numerical simulations further revealed a 13.23 % improvement in device performance when the optimized rGO-MoS2 composite was implemented as the top electrode in an inverted perovskite solar cell, demonstrating the significant potential of this material for various electronic applications.