Large Field Research Articles

Multiscale Topology Optimization Design and Additive Manufacturing of Thermal Expander Metadevices

Thermal expander metadevices can yield a large uniform temperature field powered by a linear heat source. Previous design of thermal expander metadevices can be regarded as a combination of achieved thermal cloaks and their background materials. However, these thermal-cloak-inspired expander metadevices have an inherent flaw, i.e., their thermal functionality will be lost when the background material is changed, thus limiting their practical applications. To solve this problem, the multiscale topology optimization (MTO) method is employed to design thermal expander metadevices that can maintain their expander functionality under different background materials. In MTO, transformation thermotic technology is used to determine the anisotropic thermal conductivities inside a thermal expander metadevice and topology optimization is performed to generate the topological configuration of each microstructure with the target effective thermal conductivity. Subsequently, the thermal functionalities of thermal double and triple expander metadevices with different background materials are numerically verified via simulations. Finally, the thermal double expander metadevice is fabricated via additive manufacturing and experimentally tested for its thermal functionality. The findings of this study address the challenge of designing thermal expander metadevices with background material-independent functionality.

Designing ITER motional Stark effect line shift (MSE-LS) spectrometers.

As a part of ITER beam aided diagnostics, the design of Motional Stark Effect (MSE) diagnostic observing the emission from the Balmer-α line is underway. The physics of Stark splitting shows that the Stark manifold is polarization dependent, and the energy splitting results in a line shift proportional to the electric field. Due to the challenges of maintaining the calibration of the plasma facing mirrors in ITER, the conventional MSE polarimetry measurement technique is replaced with a spectral approach that is deemed more favorable in the ITER environment. The MSE line shift (LS) diagnostic is designed to quantify the Lorentz electric field magnitude by measuring the Stark manifold using visible spectroscopy. In the presence of large magnetic fields and high energy heating beams of 1MeV, the expected Stark splitting is much larger than in typical devices. The MSE-LS design has unique challenges requiring careful consideration and modeling of its viewing geometry and photon budget. The MSE-LS approach on ITER is promising but has stringent demands on the allowable errors for the statistical and systematic fitting uncertainties. In this study, a full system model and numerical simulations of data for each sightline are completed. For a range of optical transmission fractions, photon noise analysis is conducted to determine the statistical uncertainties. This provides guidance on the spectrometer throughput, dispersion at the detector, optics, and other design choices. A conceptual design of a high throughput spectrometer with a volume phase transmission grating is presented.

Thermodynamic and economic analyses of the retrofit of existing electric power plants with fusion reactors

Electricity generation will need to reach net zero emissions globally in 2050. This will require an increase in share of renewable energy and the implementation of a controllable carbon-free base-load source. Nuclear fusion is a promising option to decarbonize base-load electricity production but its capital cost still doubles the one of technologically more mature alternatives such as large photovoltaic fields or off-shore wind installations. Within this framework, the retrofit of a dismissed power-plant could allow significant cost savings, thus facilitating the realization of a fusion electricity demonstrator. Among fusion reactors, stellarators are a valid alternative to tokamaks thanks to the higher blanket temperature and inherent continuous operation. In this scenario, we posit the challenge to use a nuclear fusion stellarator-based reactor to retrofit conventional power plants (PPs). Specifically, we select a nuclear fission plant in France and a supercritical coal fired site in Italy, by constructing 4 different retrofit scenarios as a function of the re-used components. We compare each option with a greenfield and optimized plant with the same reactor thermal power. through a thermodynamic, economic, and investment analysis.The results proves significant savings by retrofitting an existing plant, with a CapEx reduction up to 50% compared to the greenfield plants. Specifically, the most convenient retrofit strategy is to select a site that already implements cutting edge thermodynamic parameters while reusing the most existing systems (i.e. buildings, steam cycle, electricity generation, and heat rejection). This is the case of the 2 x 660 MWe supercritical coal-fired plant in Italy. Therein, the LCOEs are 39 $/MWh and 51 $/MWh, calculated with an interest rate of 2.7% and 6%, respectively, and compare with the conventional energy technologies. Moreover, such costs are competitive in the current European energy markets and yield significant net present values at the plant end of life.

The Price of Active Security in Cryptographic Protocols

We construct the first actively-secure Multi-Party Computation (MPC) protocols with an arbitrary number of parties in the dishonest majority setting, for an arbitrary field F\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\mathbb {F}}$$\\end{document} with constant communication overhead over the “passive-GMW” protocol (Goldreich, Micali and Wigderson, STOC ‘87). Our protocols rely on passive implementations of Oblivious Transfer (OT) in the Boolean setting and Oblivious Linear function Evaluation (OLE) in the arithmetic setting. Previously, such protocols were only known over sufficiently large fields (Genkin et al. STOC ‘14) or a constant number of parties (Ishai et al. CRYPTO ‘08). Conceptually, our protocols are obtained via a new compiler from a passively-secure protocol for a distributed multiplication functionality FMULT\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {F}}}}_{\\scriptscriptstyle \ extrm{MULT}}$$\\end{document}, to an actively-secure protocol for general functionalities. Roughly, FMULT\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {F}}}}_{\\scriptscriptstyle \ extrm{MULT}}$$\\end{document} is parameterized by a linear-secret sharing scheme S\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {S}}}}$$\\end{document}, where it takes S\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {S}}}}$$\\end{document}-shares of two secrets and returns S\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {S}}}}$$\\end{document}-shares of their product. We show that our compilation is concretely efficient for sufficiently large fields, resulting in an overhead of 2 when securely computing natural circuits. Our compiler has two additional benefits: (1) It can rely on any passive implementation of FMULT\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {F}}}}_{\\scriptscriptstyle \ extrm{MULT}}$$\\end{document}, which, besides the standard implementation based on OT (for Boolean) and OLE (for arithmetic), allows us to rely on implementations based on threshold cryptosystems (Cramer et al. Eurocrypt ‘01), and (2) it can rely on weaker-than-passive (i.e., imperfect/leaky) implementations, which in some parameter regimes yield actively-secure protocols with overhead less than 2. Instantiating this compiler with an “honest-majority” implementation of FMULT\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {F}}}}_{\\scriptscriptstyle \ extrm{MULT}}$$\\end{document}, we obtain the first honest-majority protocol (with up to one-third corruptions) for Boolean circuits with constant communication overhead over the best passive protocol (Damgård and Nielsen, CRYPTO ‘07).

The Price of Active Security in Cryptographic Protocols

We construct the first actively-secure Multi-Party Computation (MPC) protocols with an arbitrary number of parties in the dishonest majority setting, for an arbitrary field F\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\mathbb {F}}$$\\end{document} with constant communication overhead over the “passive-GMW” protocol (Goldreich, Micali and Wigderson, STOC ‘87). Our protocols rely on passive implementations of Oblivious Transfer (OT) in the Boolean setting and Oblivious Linear function Evaluation (OLE) in the arithmetic setting. Previously, such protocols were only known over sufficiently large fields (Genkin et al. STOC ‘14) or a constant number of parties (Ishai et al. CRYPTO ‘08). Conceptually, our protocols are obtained via a new compiler from a passively-secure protocol for a distributed multiplication functionality FMULT\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {F}}}}_{\\scriptscriptstyle \ extrm{MULT}}$$\\end{document}, to an actively-secure protocol for general functionalities. Roughly, FMULT\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {F}}}}_{\\scriptscriptstyle \ extrm{MULT}}$$\\end{document} is parameterized by a linear-secret sharing scheme S\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {S}}}}$$\\end{document}, where it takes S\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {S}}}}$$\\end{document}-shares of two secrets and returns S\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {S}}}}$$\\end{document}-shares of their product. We show that our compilation is concretely efficient for sufficiently large fields, resulting in an overhead of 2 when securely computing natural circuits. Our compiler has two additional benefits: (1) It can rely on any passive implementation of FMULT\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {F}}}}_{\\scriptscriptstyle \ extrm{MULT}}$$\\end{document}, which, besides the standard implementation based on OT (for Boolean) and OLE (for arithmetic), allows us to rely on implementations based on threshold cryptosystems (Cramer et al. Eurocrypt ‘01), and (2) it can rely on weaker-than-passive (i.e., imperfect/leaky) implementations, which in some parameter regimes yield actively-secure protocols with overhead less than 2. Instantiating this compiler with an “honest-majority” implementation of FMULT\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{{\\mathcal {F}}}}_{\\scriptscriptstyle \ extrm{MULT}}$$\\end{document}, we obtain the first honest-majority protocol (with up to one-third corruptions) for Boolean circuits with constant communication overhead over the best passive protocol (Damgård and Nielsen, CRYPTO ‘07).

Performance of SK-Gd’s Upgraded Real-time Supernova Monitoring System

Among multimessenger observations of the next Galactic core-collapse supernova, Super-Kamiokande (SK) plays a critical role in detecting the emitted supernova neutrinos, determining the direction to the supernova (SN), and notifying the astronomical community of these observations in advance of the optical signal. In 2022, SK has increased the gadolinium dissolved in its water target (SK-Gd) and has achieved a Gd concentration of 0.033%, resulting in enhanced neutron detection capability, which in turn enables more accurate determination of the supernova direction. Accordingly, SK-Gd’s real-time supernova monitoring system has been upgraded. SK_SN Notice, a warning system that works together with this monitoring system, was released on 2021 December 13, and is available through GCN Notices. When the monitoring system detects an SN-like burst of events, SK_SN Notice will automatically distribute an alarm with the reconstructed direction to the supernova candidate within a few minutes. In this paper, we present a systematic study of SK-Gd’s response to a simulated Galactic SN. Assuming a supernova situated at 10 kpc, neutrino fluxes from six supernova models are used to characterize SK-Gd’s pointing accuracy using the same tools as the online monitoring system. The pointing accuracy is found to vary from 3° to 7° depending on the models. However, if the supernova is closer than 10 kpc, SK_SN Notice can issue an alarm with three-degree accuracy, which will benefit follow-up observations by optical telescopes with large fields of view.

A comparison of X-ray attenuation, differential phase, and dark-field contrast imaging for the detection of porosity in carbon fiber reinforced cyanate ester

In this work we explore the capabilities of Talbot-Lau grating interferometry (TLGI) radiography for the inspection of porosity in structural specimens of cyanate ester carbon fiber reinforced polymer. The influence of system resolution and varying specimen thicknesses on mean values and standard deviations (STDV) in all three image modalities acquired by TLGI are addressed. Results show that mean absorption contrast (AC) values are highly affected by specimen thickness and strong negative correlation (r ≤ −0.8) is found only after correction via preliminary thickness measurements. Although dark-field contrast (DFC) is affected by changes in specimen thickness as well, the signal can be corrected by normalization with the inherently available AC. Consequently, strong positive correlation with porosity was found both in high- and low-resolution imaging (r = 0.83 and 0.71 respectively). Without the need for high image resolution or thickness measurements, the normalized DFC is a promising option for large field of view inspections. Investigations of STDV revealed strong positive correlations between porosity and AC STDV as well as differential phase contrast (DPC) STDV (r = 0.95 and 0.92 respectively) but high image resolution is required. Furthermore, results suggest increased robustness against variations in specimen thickness of AC and DPC STDV analyses.

Comparison of the Accuracy and Efficiency of Two Dynamic Navigation System Workflow for Fiber-post Removal: Small versus Large Field-of-view Registration Workflows

IntroductionThis study investigates the feasibility of a dynamic navigation system (DNS) small field of view workflow (DNS-SFOVw) for fiber-post removal and compares its accuracy and efficiency to the conventional large field of view workflow (DNS-LFOVw). MethodsFifty-six extracted human maxillary molars were divided into DNS-SFOVw (n = 28) and DNS-LFOVw (n = 28). The palatal canal was restored with an intraradicular RelyX fiber post and luted with RelyX Unicem; a core buildup was used. Teeth were mounted in a 3D-printed surgical jaw. A preoperative cone-beam computed tomography (CBCT) scan was taken with a 40 × 40 mm FOV for the DNS-SFOVw and a single arch CBCT scan for the DNS-LFOVw. The drilling entry point, trajectory, angle, and depth were planned in the X-guide software. The DNS registration method for the DNS-SFOVw was virtual-based registration on teeth, and the marker point-based method was used for the DNS-LFOVw. The fiber posts were drilled out under DNS guidance. A postoperative CBCT scan was taken. Three-dimensional deviations, angular deflection, number of mishaps, registration, and total operation time were calculated. ResultsThe DNS-SFOVw was as accurate as DNS-LFOVw (P > .05). The DNS-LFOVw registration time was less than DNS-SFOVw (P < .05). There was no difference in the number of mishaps (P > .05). Both DNS-SFOVw and DNS-LFOVw were time-efficient, with DNS-LFOVw taking less total operational time (P < .05). ConclusionWithin the limitations of this in-vitro study, the DNS-SFOVw was as accurate as the DNS-LFOVw for fiberpost removal. Both DNS-LFOVw and DNS-SFOVw were time-efficient in removing fiber-posts.

Experimental observation of repulsively bound magnons.

Stable composite objects, such as hadrons, nuclei, atoms, molecules and superconducting pairs, formed by attractive forces are ubiquitous in nature. By contrast, composite objects stabilized by means of repulsive forces were long thought to be theoretical constructions owing to their fragility in naturally occurring systems. Surprisingly, the formation of boundatom pairs by strong repulsive interactions has been demonstrated experimentally in optical lattices1. Despite this success, repulsively bound particle pairs were believed to have no analogue in condensed matter owing to strong decay channels. Here we present spectroscopic signatures of repulsively bound three-magnon states and bound magnon pairs in the Ising-like chain antiferromagnet BaCo2V2O8. In large transverse fields, below the quantum critical point, we identify repulsively bound magnon states by comparing terahertz spectroscopy measurements to theoretical results for the Heisenberg-Ising chain antiferromagnet, a paradigmatic quantum many-body model2-5. Our experimental results show that these high-energy, repulsively bound magnon states are well separated from continua, exhibit notable dynamical responses and, despite dissipation, are sufficiently long-lived to be identified. As the transport properties in spin chains can be altered by magnon bound states, we envision that such states could serve as resources for magnonics-based quantum information processing technologies6-8.

Unconventional superconductivity in chiral molecule-TaS2 hybrid superlattices.

Chiral superconductors, a unique class of unconventional superconductors in which the complex superconducting order parameter winds clockwise or anticlockwise in the momentum space1, represent a topologically non-trivial system with intrinsic time-reversal symmetry breaking (TRSB) and direct implications for topological quantum computing2,3. Intrinsic chiral superconductors are extremely rare, with only a few arguable examples, including UTe2, UPt3 and Sr2RuO4 (refs. 4-7). It has been suggested that chiral superconductivity may exist in non-centrosymmetric superconductors8,9, although such non-centrosymmetry is uncommon in typical solid-state superconductors. Alternatively, chiral molecules with neither mirror nor inversion symmetry have been widely investigated. We suggest that an incorporation of chiral molecules into conventional superconductor lattices could introduce non-centrosymmetry and help realize chiral superconductivity10. Here we explore unconventional superconductivity in chiral molecule intercalated TaS2 hybrid superlattices. Our studies reveal an exceptionally large in-plane upper critical field Bc2,|| well beyond the Pauli paramagnetic limit, a robust π-phase shift in Little-Parks measurements and a field-free superconducting diode effect (SDE). These experimental signatures of unconventional superconductivity suggest that the intriguing interplay between crystalline atomic layers and the self-assembled chiral molecular layers may lead to exotic topological materials. Our study highlights that the hybrid superlattices could lay a versatile path to artificial quantum materials by combining a vast library of layered crystals of rich physical properties with the nearly infinite variations of molecules of designable structural motifs and functional groups11.

A novel analysis of contamination in Lyman-break galaxy samples at z ∼ 6-8: spatial correlation with intermediate-redshift galaxies at z ∼ 1.3-2

ABSTRACT Potential contamination from low/intermediate-redshift galaxies, such as objects with a prominent Balmer break, affects the photometric selection of high-redshift galaxies through identification of a Lyman break. Traditionally, contamination is estimated from spectroscopic follow-up and/or simulations. Here, we introduce a novel approach to estimating contamination for Lyman-break galaxy (LBG) samples based on measuring spatial correlation with the parent population of lower redshift interlopers. We propose two conceptual approaches applicable to different survey strategies: a single large contiguous field and a survey consisting of multiple independent lines of sight. For a large single field, we compute the cross-correlation function between galaxies at redshift $z \sim 6$ and intermediate-redshift galaxies at $z \sim 1.3$. We apply the method to the CANDELS GOODS-S and XDF surveys and compare the measurement with simulated mock observations, finding that the contamination level in both cases is not measurable and lies below 5.5 per cent (at 90 per cent confidence). For random-pointing multiple field surveys, we measure instead the number count correlation between high-redshift galaxies and interlopers, as a two-point correlation analysis is not generally feasible. We show an application to the LBG samples at redshift $z \sim 8$ and the possible interloper population at $z \sim 2$ in the Brightest of Reionizing Galaxies (BoRG) survey. By comparing the Pearson correlation coefficient with the result from Monte Carlo simulations, we estimate a contamination fraction of $62^{+13}_{-39} \, \mathrm{ per}\, \mathrm{ cent}$, consistent with previous estimates in the literature. These results validate the proposed approach and demonstrate its utility as an independent check of contamination in photometrically selected samples of high-redshift galaxies.

Continuous Optical Zoom Compound Eye Imaging Using Alvarez Lenses Actuated by Dielectric Elastomers.

The compound eye is a natural multi-aperture optical imaging system. In this paper, a continuous optical zoom compound eye imaging system based on Alvarez lenses is proposed. The main optical imaging part of the proposed system consists of a curved Alvarez lens array (CALA) and two Alvarez lenses. The movement of the CALA and two Alvarez lenses perpendicular to the optical axis is realized by the actuation of the dielectric elastomers (DEs). By adjusting the focal length of the CALA and the two Alvarez lenses, the proposed system can realize continuous zoom imaging without any mechanical movement vertically to the optical axis. The experimental results show that the paraxial magnification of the target can range from ∼0.30× to ∼0.9×. The overall dimensions of the optical imaging part are 54 mm × 36 mm ×60 mm (L × W × H). The response time is 180 ms. The imaging resolution can reach up to 50 lp/mm during the optical zoom process. The proposed continuous optical zoom compound eye imaging system has potential applications in various fields, including large field of view imaging, medical diagnostics, machine vision, and distance detection.

New strain configuration of convergence in the Arabia-Eurasia collisional zone: A comprehensive analysis of large shear zones inferred from geodetic and seismic observations

A new strain configuration is presented concerning the ongoing convergence deformation field in the Turkish-Iranian High Plateau (TIHP), E Anatolia-NW Iran. The strain configuration is derived from the contribution of geodetic strain-rate fields using GPS velocity data to reveal new constraints not documented previously in the region. This provides good evidence for novel “highland shear strain zones” by analysis of the combination of interpolated GPS velocity fields and seismological observations with maximum principal strain axes. Both the strain-rate fields and rotational elements of the estimated geodetic deformation exhibit juxtaposed, patchy strain rate partitioning in E Anatolia-NW Iran. These comprise both compressional strain lobes combined with local extensional areas and large shear strain fields in the core of the collision where the rotation rate fields present an unexpected propagation zone of continuous, counterclockwise rotation towards the W. The main results define approximately N-S- and W-E-trending, large, continuous, diagonal shear strain patterns with high total strain rate and maximum shear strain rate, consistent with right-lateral strike-slip and normal focal mechanisms. These are the Longitudinal Shear Zone (LSZ) extending from S to N and dividing the TIHP into the E Anatolia and NW Iran blocks, and the right-lateral Transcurrent Shear Zone (TSZ) extending from E (NW Iran) to W (E Anatolia). These differential movements of the inconsistent LSZ and TSZ shape both the highly buoyant plateau topography and the area, which undergoes migration to the W with respect to stable Eurasia by means of plateau push. Geodetic deformation compatible with fault focal data indicates that the LSZ and TSZ, in the framework of thermal and mechanical changes in the structure of the lithospheric thickness beneath the TIHP, are invaded and shaped by flowing mantle material that triggers and drives lateral escape of convergent crustal blocks, and configures the convergence with a shear-dominated deformation regime. The shear regime is primarily driven by NE- and NW-directed mantle flow fields and associated buoyancy forces due to slab fragmentation and tears in the region, exerting dominant control over the differential evolution of the LSZ and TSZ patterns. The new strain configuration for this convergence illuminates “the highland tectonics of large shear zones” resulting from slab thinning or its absence, and challenges conventional tectonic strain models in the TIHP.

How digital transformation can influence workflows, teaching practices and curricula in (bio)process science and engineering—An interview series with stakeholders

AbstractA massive digital transformation is underway in biotechnology and process engineering fueled by recent advances in machine learning and so‐called artificial intelligence, especially in the large language model field (e.g., ChatGPT). Training courses and curricula will need to adapt to keep pace, but the speed of progress is such that guidelines for the implementation of a digital transformation are probably already outdated. We therefore interviewed stakeholders from the fields of didactics, biotechnology and process engineering to collect the latest perspectives on the impact of digital transformation and to solicit recommendations for the adaptation of curricula and training courses to reflect new work profiles in academia and industry. We conducted semi‐structured interviews with 17 stakeholders and used a framework analysis approach to structure and evaluate the collected information. For example, data handling was the dominant general activity affected by digital transformation, whereas multitasking was relevant to work, and the design and implementation of new didactic methods and content was linked to teaching. The interviews revealed that an increasingly diverse set of skills and competences (in addition to those in current curricula) will be expected from the next generation of biotechnologists and process engineers. This includes profound programming skills, model building abilities, as well critical data interpretation and data literacy in the widest sense. The corresponding key challenges will be a reasonable and structured disinvestment in other areas to provide slots for the new content and to secure resources for the implementation of necessary modifications.

Properties of magnetic null points associated with X-class flares during solar cycle 24

ABSTRACT Since the launch of the Solar Dynamics Observatory (SDO) in 2010 and throughout the solar cycle 24, the Sun has produced few tens of X-class flares, which are the most energetic solar events. Those flares are produced in regions where the magnetic flux/energy is large and the magnetic configurations are complex. To provide more insights into the flaring process, we investigate the properties of magnetic null points (MNPs) and their correlation with the energy release sites. During solar cycle 24, we identify 17 X-class flares satisfying selection criteria. From SDO/HMI magnetograms, we perform potential extrapolations around the peak time of the flare to access the 3D coronal magnetic field and thus investigate the existence of coronal MNPs. We then correlate the flaring sites with the existing MNPs using SDO/AIA 171 Å; EUV observations, and deduce their properties (sign, spine, and fan). Six active regions out of 10 possess at least one MNP which is stable and with large magnetic field gradients: this implies that 35 per cent of X-class flares are associated with an MNP; of which 87.5 per cent of MNPs are of positive type. The MNPs associated with the flare sites are predominantly located at a height between 0.5 and 2 Mm, and with a vertical/radial spine field line. We also find a slight correlation between the MNPs not associated with a flare and negative-type MNPs (55 per cent) within the active region. Regarding the physics of flares, the association between the enhanced intensity at the flaring site and an MNP represents about a third of the possible scenarios for triggering X-class flares.

Remote sensing estimation of dissolved organic carbon concentrations in Chinese lakes based on Landsat images

Long-term estimation of dissolved organic carbon (DOC) dynamics based on satellite data provides important information to comprehensively understand the lake carbon cycle, climate change, and sustainable water resource management. Here, we proposed a novel DOC concentration estimation model based on water classification using a large field dataset (n = 1929) collected from 123 Chinese lakes. We divided water into terrestrial-DOM-dominated and endogenous-DOM-dominated water bodies using the optimal spectral slope ratio (SR) threshold determined by setting the classification scenario. Then, we calibrated the optimal DOC estimation model using stepwise quadratic polynomial regression for the different types of water and determined the final DOC estimation model. The final DOC estimation model performed well in both the calibration and validation datasets, with R2 ≥ 0.78, RMSD ≤ 0.78 mg/L, and MAPD ≤ 16.51 %. Subsequently, we mapped the spatiotemporal dynamics of DOC concentrations in Chinese lakes with surface area greater than 1 km2 (n = 2621) between 1986 and 2021 using the Landsat data. Spatially, we observed obvious spatial heterogeneity in the DOC concentrations in the Chinese lakes, with the highest DOC concentration occurring in the Northeast Region (NER) (4.39 ± 0.21 mg/L) and the lowest DOC concentration occurring in the Qinghai-Tibet Plateau Region (QTR) (3.76 ± 1.12 mg/L). Temporally, the average DOC concentration in Chinese lakes generally decreased at a rate of − 0.09 mg/L decade−1 from 1986 to 2021, during which 56.5 % of the lakes experienced a decrease, 29.6 % of the lakes experienced no obvious change, and 13.9 % of the lakes experienced an increase. We also revealed that human activities are the main drivers of DOC increases in lakes, while vegetation and climate change are the main drivers of DOC decreases in lakes. Our results contribute to improving the accuracy of organic carbon estimations in lakes worldwide and provides meaningful insights into the lake carbon cycle..

Real-GDSR: Real-World Guided DSM Super-Resolution via Edge-Enhancing Residual Network

Abstract. A low-resolution digital surface model (DSM) features distinctive attributes impacted by noise, sensor limitations and data acquisition conditions, which failed to be replicated using simple interpolation methods like bicubic. This causes super-resolution models trained on synthetic data does not perform effectively on real ones. Training a model on real low and high resolution DSMs pairs is also a challenge because of the lack of information. On the other hand, the existence of other imaging modalities of the same scene can be used to enrich the information needed for large-scale super-resolution. In this work, we introduce a novel methodology to address the intricacies of real-world DSM super-resolution, named REAL-GDSR, breaking down this ill-posed problem into two steps. The first step involves the utilization of a residual local refinement network. This strategic approach departs from conventional methods that trained to directly predict height values instead of the differences (residuals) and utilize large receptive fields in their networks. The second step introduces a diffusion-based technique that enhances the results on a global scale, with a primary focus on smoothing and edge preservation. Our experiments underscore the effectiveness of the proposed method. We conduct a comprehensive evaluation, comparing it to recent state-of-the-art techniques in the domain of real-world DSM super-resolution (SR). Our approach consistently outperforms these existing methods, as evidenced through qualitative and quantitative assessments.

Fate and transport of viable Bacillus anthracis simulant spores in ambient air during a large outdoor decontamination field exercise

ABSTRACT The Wide Area Demonstration (WAD) was a field exercise conducted under the U.S. EPA’s Analysis of Coastal Operational Resiliency program, in conjunction with the U.S. Department of Homeland Security and the U.S. Coast Guard. The purpose of the WAD was to operationalize at field scale aspects of remediation activities that would occur following an outdoor release of Bacillus anthracis spores, including sampling and analysis, decontamination, data management, and waste management. The WAD was conducted in May 2022 at Fort Walker (formerly known as Fort A.P. Hill) and utilized Bacillus atrophaeus as a benign simulant for B. anthracis. B. atrophaeus spores were inoculated onto the study area at the beginning of the study, and air samples were collected daily during each of the different phases of the WAD using Dry Filter Units (DFUs). Ten DFU air samplers were placed at the perimeter of the study area to collect bioaerosols onto two parallel 47-mm diameter polyester felt filters, which were then subsequently analyzed in a microbiological laboratory for the quantification of B. atrophaeus. The study demonstrated the use of DFUs as a rugged and robust bioaerosol collection device. The results indicated that the highest B. atrophaeus spore air concentrations (up to ~ 5 colony forming units/m3) occurred at the beginning of the demonstration (e.g. during inoculation and characterization sampling phases) and generally downwind from the test site, suggesting transport of the spores was occurring from the study area. Very few B. atrophaeus spores were detected in the air after several weeks and following decontamination of exterior surfaces, thus providing an indication of the site decontamination procedures’ effectiveness. No B. atrophaeus spores were detected in any of the blank or background samples. Implications: Following an incident involving a release of Bacillus anthracis spores or other biological threat agent into the outdoor environment, understanding the factors that may affect the bioagent’s fate and transport can help predict viable contaminant spread via the ambient air. This paper provides scientific data for the first time on ambient air concentrations of bacterial spores over time and location during different phases of a field test in which Bacillus atrophaeus (surrogate for B. anthracis) spores were released outdoors as part of a full-scale study on sampling and decontamination in an urban environment. This study advances the knowledge related to the fate and transport of bacterial spores (such as those causing anthrax disease) as an aerosol in the outdoor environment over the course of three weeks in a mock urban environment and has exposure and health risk implications. The highest spore air concentrations occurred at the beginning of the study (e.g. during inoculation of surfaces and characterization sampling), and in the downwind direction, but diminished over time; few B. atrophaeus spores were detected in the air after several weeks and following decontamination. Therefore, in an actual incident, potential reaerosolization of the microorganism and subsequent transport in the air during surface sampling and remediation efforts should be considered for determining exclusion zone locations and estimating potential risk to neighboring communities. The data also provide evidence suggesting that the large-scale decontamination of outdoor surfaces may reduce air concentrations of the bioagent, which is important since exposure of B. anthracis via inhalation is a primary concern.

Inverse design of nonlinear metasurfaces for sum frequency generation

Abstract Sum frequency generation (SFG) has multiple applications, from optical sources to imaging, where efficient conversion requires either long interaction distances or large field concentrations in a quadratic nonlinear material. Metasurfaces provide an essential avenue to enhanced SFG due to resonance with extreme field enhancements with an integrated ultrathin platform. In this work, we formulate a general theoretical framework for multi-objective topology optimization of nanopatterned metasurfaces that facilitate high-efficiency SFG and simultaneously select the emitted direction and tailor the metasurface polarization response. Based on this framework, we present novel metasurface designs showcasing ultimate flexibility in transforming the outgoing nonlinearly generated light for applications spanning from imaging to polarimetry. For example, one of our metasurfaces produces highly polarized and directional SFG emission with an efficiency of over 0.2 cm2 GW−1 in a 10 nm signal operating bandwidth.

Atacama Large Aperture Submillimeter Telescope (AtLAST) science: Our Galaxy

As we learn more about the multi-scale interstellar medium (ISM) of our Galaxy, we develop a greater understanding for the complex relationships between the large-scale diffuse gas and dust in Giant Molecular Clouds (GMCs), how it moves, how it is affected by the nearby massive stars, and which portions of those GMCs eventually collapse into star forming regions. The complex interactions of those gas, dust and stellar populations form what has come to be known as the ecology of our Galaxy. Because we are deeply embedded in the plane of our Galaxy, it takes up a significant fraction of the sky, with complex dust lanes scattered throughout the optically recognizable bands of the Milky Way. These bands become bright at (sub-)millimetre wavelengths, where we can study dust thermal emission and the chemical and kinematic signatures of the gas. To properly study such large-scale environments, requires deep, large area surveys that are not possible with current facilities. Moreover, where stars form, so too do planetary systems, growing from the dust and gas in circumstellar discs, to planets and planetesimal belts. Understanding the evolution of these belts requires deep imaging capable of studying belts around young stellar objects to Kuiper belt analogues around the nearest stars. Here we present a plan for observing the Galactic Plane and circumstellar environments to quantify the physical structure, the magnetic fields, the dynamics, chemistry, star formation, and planetary system evolution of the galaxy in which we live with AtLAST; a concept for a new, 50m single-dish sub-mm telescope with a large field of view which is the only type of facility that will allow us to observe our Galaxy deeply and widely enough to make a leap forward in our understanding of our local ecology.