Laboratory Conditions Research Articles

Exploring the effects of molecular beam epitaxy growth characteristics on the temperature performance of state-of-the-art terahertz quantum cascade lasers

This study conducts a comparative analysis, using non-equilibrium Green’s functions (NEGF), of two state-of-the-art two-well (TW) Terahertz Quantum Cascade Lasers (THz QCLs) supporting clean 3-level systems. The devices have nearly identical parameters and the NEGF calculations with an abrupt-interface roughness height of 0.12 nm predict a maximum operating temperature (Tmax) of ~ 250 K for both devices. However, experimentally, one device reaches a Tmax of ~ 250 K and the other a Tmax of only ~ 134 K. Both devices were fabricated and measured under identical conditions in the same laboratory, with high quality processes as verified by reference devices. The main difference between the two devices is that they were grown in different MBE reactors. Our NEGF-based analysis considered all parameters related to MBE growth, including the maximum estimated variation in aluminum content, growth rate, doping density, background doping, and abrupt-interface roughness height. From our NEGF calculations it is evident that the sole parameter to which a drastic drop in Tmax could be attributed is the abrupt-interface roughness height. We can also learn from the simulations that both devices exhibit high-quality interfaces, with one having an abrupt-interface roughness height of approximately an atomic layer and the other approximately a monolayer. However, these small differences in interface sharpness are the cause of the large performance discrepancy. This underscores the sensitivity of device performance to interface roughness and emphasizes its strategic role in achieving higher operating temperatures for THz QCLs. We suggest Atom Probe Tomography (APT) as a path to analyze and measure the (graded)-interfaces roughness (IFR) parameters for THz QCLs, and subsequently as a design tool for higher performance THz QCLs, as was done for mid-IR QCLs. Our study not only addresses challenges faced by other groups in reproducing the record Tmax of ~ 250 K and ~ 261 K but also proposes a systematic pathway for further improving the temperature performance of THz QCLs beyond the state-of-the-art.

Selection of Aphis craccivora (Hemiptera: Aphididae) for Resistance to Thiamethoxam Insecticide under Laboratory Conditions1

Abstract The cowpea aphid, Aphis craccivora Koch (Hemiptera: Aphididae), is a polyphagous pest that causes yield losses in a variety of crops worldwide. Its management relies mainly on the use of chemical insecticides. This study followed the development of resistance to thiamethoxam in A. craccivora under laboratory conditions for 24 generations. The initial median lethal concentration (LC50) of thiamethoxam in a susceptible laboratory population of A. craccivora was 2.62 ppm. Exposure of surviving aphids in each generation to thiamethoxam caused an increase in the LC50 with each successive generation. After 24 generations, the LC50 had increased to 225.83 ppm, an 86.2-fold increase over the initial LC50. Resistance, as indicated by the increasing LC50, appeared as early as the second generation with a 1.4-fold increase over the initial generation. By the 14th generation, the LC50 had increased by 29-fold, and by the 16th generation, it had quickly increased by 69.4-fold. Our results indicate that A. craccivora populations repeatedly exposed to thiamethoxam in a cropping system can lead to rapid development of resistance to the insecticide. Any overuse or other misuse of the pesticide may lead to an even more rapid development of high levels of resistance to thiamethoxam within a short period of time. Elevated levels of the detoxifying enzymes, carboxylesterase, glutathione-S-transferase, and mixed function oxidases, in aphids exhibiting resistance as compared with the initial susceptible population indicated that the detoxifying enzymes, especially the carboxylesterases, are likely involved in facilitating the development of resistance to thiamethoxam in A. craccivora.

Efficiency of pre-sowing treatment of white lupine seeds with complex compositions based on Tebu 60 fungicide

The results of laboratory and field tests of effectiveness of the Tebu 60 protectant, ME (microemulsion) in its pure form and in tank mixtures with Humat+7 and Fitaktiv Vita against anthracnose seed infection and other diseases of lupine are presented. The research was conducted in 2020–2022 in the Bryansk region. The object of the study were the seeds, seedlings and crops of the Michurinsky white lupine variety. In laboratory conditions, biological evaluation of the effectiveness of the Tebu 60 protectant in pure form (rate of consumption – 0.5 l/t) and tank mixtures Tebu 60 + Humate+7 (0.5 + 0.5 l/t) and Tebu 60 + Fitaktiv Vita (0.5 + 0.05 l/t) against anthracnose seed infection was carried out by the number of affected seedlings grown in paper-polyethylene rolls in comparison with the control (without treatment). The tank mixture Tebu 60 + Fitaktiv Vita (100%) showed high biological efficacy against anthracnose. Moreover, this mixture significantly (LSD05 = 0.66) had the least effect on reducing the hypocotyl length of the seedlings (8.8%). The field experiment was laid down in a fourfold repetition. The plot area was 34 m2. The seeding rate was 1.0 million germinated seeds/ha. The soil of the site was gray forest soil, humus content – 2.6%. The forecrop was spring cereal crops. Seed dressing with Tebu 60 (0.5 l/t) and tank mixtures Tebu 60 + Humate+7 (0.5 + 0.5 l/t) and Tebu 60 + Fitaktiv Vita (0.5 + 0.05 l/t) were conducted one month before the sowing. The effectiveness of the treatment was evaluated in comparison with the control. On average, the highest biological efficacy against anthracnose seed infection was shown by the tank mixture Tebu 60 + Fitaktiv Vita (98.1%). By the shiny pod phase, the number of affected beans was 20.5% compared to 78.4% in the control. The biological efficacy against fusarium disease and rhizoctonia was 65.9 and 74.4%, respectively. The prevalence of gray rot and white rot on beans was reduced 8 and 11 times, respectively. Seed germination increased significantly (LSD05 = 0.74) by 16.2%, safety of productive plants to harvesting – by 56.5%. Reliable increase in the seed yield was 2.52 t/ha, cost recovery – 64.88 rubles.

Exploring the influence of external electric fields on the catalytic pyrolysis of oil shale kerogen molecules

Oil shale is a widely distributed and abundant sedimentary rock that can be converted into shale oil through pyrolysis, providing a supplementary solution to the increasing scarcity of conventional fossil energy. However, the traditional pyrolysis process of oil shale faces problems such as low oil yield, high energy consumption, and poor oil quality. Recent experiments have demonstrated that using an external electric field to catalyze the pyrolysis of oil shale can address these problems. However, due to the complex physical and chemical properties of oil shale and its pyrolysis process, the catalytic mechanisms and effects have not been reasonably explained. To address these issues, this study uses density functional theory to calculate the properties of oil shale molecules under external electric fields of different directions and strengths. The results indicate that at electric field strengths far exceeding experimental conditions, the external electric field does have a certain catalytic effect on oil shale, which varies depending on the molecule. However, at electric field strengths achievable in actual laboratory conditions, the catalytic effect of the electric field on oil shale is not significant. Therefore, the mechanisms revealed by past experiments on the catalytic effects of electric fields on oil shale pyrolysis may be partially flawed. This study not only fills the gap in understanding the mechanisms of external electric field catalysis of oil shale but also provides a theoretical foundation for future applications of electric fields in catalyzing oil shale.

Resting for viability: Gordonia polyisoprenivorans ZM27, a robust generalist for petroleum bioremediation under hypersaline stress

The intrinsic issue associated with the application of microbes for practical pollution remediation involves maintaining the expected activity of engaged strains or consortiums as effectively as that noted under laboratory conditions. Faced with various stress factors, degraders with dormancy ability are more likely to survive and exhibit degradation activity. In this study, a hydrocarbonoclastic and halotolerant strain, Gordonia polyisoprenivorans ZM27, was isolated via stimulation with resuscitation-promoting factor (Rpf). Long-term exposure to dual stresses of 10% NaCl and starvation induced ZM27 to enter a viable but nonculturable (VBNC)-like state, and ZM27 cells could be resuscitated upon Rpf stimulation. Notable changes in both morphological and physiological characteristics between VBNC-like ZM27 cells and resuscitated cells confirmed the response to Rpf and their robust resistance against harsh environments. Whole-genome sequencing and analysis indicated ZM27 could be a generalist degrader with dormancy ability. Subsequently, VBNC-like ZM27 was applied in a soil microcosm experiment to investigate the practical application potential under harsh conditions. VBNC-like ZM27 combined with Rpf stimulation exhibited the most effective biodegradation performance, and the initial n-hexadecane content (1000 mg kg−1) decreased by 63.29% after 14-day incubation. Based on 16S rRNA amplicon sequencing and analysis, Gordonia exhibited a positive response to Rpf stimulation. The relative abundance of genus Gordonia was negatively correlated with that of Alcanivorax, a genus of obligate hydrocarbon degrader with the greatest abundance during soil incubation. Based on the degradation profile and community analysis, generalist Gordonia may be more efficient in hydrocarbon degradation than specialist Alcanivorax under harsh conditions. The characteristics of ZM27, including its sustainable culturability under long-term stress, response to Rpf and robust performance in soil microcosms, are valuable for the remediation of petroleum pollution under stressful conditions. Our work validated the importance of dormancy and highlighted the underestimated role of low-activity degraders in petroleum remediation.

Long term measurements of aerosol mass concentration with optical particle counters: Discrepancies with plausible reasons

Gravimetry-based direct measurements of mass concentration require offline analysis which is not suited for field campaigns. Hence such campaigns rely on the estimation of mass concentration by indirect methods mostly calibrated in controlled laboratory conditions. Optical particle counter (OPC) employs algorithms converting the measured number concentration to mass concentration using appropriate conversion factors. The accuracy of such conversion has not been validated for widely varying atmospheric conditions. This study compares the mass concentration estimated by OPC with those directly obtained from gravimetry-based instruments for outdoor samples collected in Bathinda City, Punjab, India from January 2022 to November 2023. The difference in the gravimetrically measured and OPC predicted values quantified in terms of ratios (gravimetric to optically estimated mass concentration), came out to be 1.42 ± 0.77, 0.99 ± 0.51, and 1.17 ± 0.58 for PM10, PM2.5 and PM1, respectively. This difference when estimated with the back-up filter of OPC itself (C Factor), was 1.37 ± 0.66. More than half of the samples showed ratios outside the 0.8–1.2 range thus indicating under or over-estimation in the OPC predicted values. The probable role of variation in density, shape, and refractive index of atmospheric aerosol particles towards the observed inaccuracy of estimated mass concentration has been highlighted. In the absence of clear guidelines and protocols, the study suggests ways to improve the accuracy via periodic measurement of the C Factor and/or incorporating calibration factors in such measurements.

Fishmeal-Based Media Supports Growth and Endospore Production of Locally-Isolated Lysinnibacillus sphaericus and Induces its Toxicity to 3rd Instar Aedes aegypti Larvae in Laboratory Conditions

The aim of this study was to determine whether fishmeal-based media could be used to grow L. sphaericus and induce its toxicity against Aedes aegypti larvae. Three concentrations (10, 20 and 30%) of fishmeal-based media were used to grow L. sphaericus isolate Bs2-1-2. Cell growth and endospore production were observed every 12 hours for 72 hours. The lethal concentration was measured every 24 hours for 72 hours of fermentation. The highest cell concentration was found in L. sphaericus grown on the media with 30% fishmeal concentration (3.03x1008 cells/mL), followed by 20% concentration (2.43x1008 cells/mL) and the lowest at 10% concentration (2.20x1008 cells/mL). At the end of fermentation, the highest concentration was found in L. sphaericus grown on 30% fishmeal-based media (1.51x1008 cells/mL), followed by 20% media (6.95x1007 cells/mL) and 10% media (3.21x1007 cells/mL). After 72-hour incubation, the highest endospore concentration was achieved by L. sphaericus grown on 20% (2.51x1008 cells/mL) and 10% (2.19x1008 cells/mL) fishmeal-based media. Initial larval toxicity of L. sphaericus showed the highest mortality on 20 and 30% fishmeal-based media (both reaching 53.33%), while 10% fishmeal-based media gave only 26.67% larval mortality. The LC50 value at 72 hours was achieved by L. sphaericus cultured on 30% fishmeal-based media (2.47 x 1008 cells/mL), followed by 20% concentration (4.82 x 1008 cells/mL) and 10% concentration (9.01 x 1009 cells/mL). The conclusion of this study was all concentrations of fishmeal-based media could support cell growth, endospore production and larval toxicity induction of L. sphaericus.

Effectiveness of the recirculation air cleaner in real conditions at variation of the air flow and PM2.5 content

Technical data on the effectiveness of air purifiers are usually obtained in laboratory conditions in special aerosol stands with test chambers or boxes of a small volume, while in real conditions the purifiers are used in rooms with a volume of at least 40-60 m3 with a permanent presence of people (distribution respiratory diseases emitted with breathing) and entry of PM2.5..PM10 particles into the room from working equipment (printers, chargers, power tools, etc.). There are already enough scientific materials on this matter, which prove that the actual efficiency of air purifiers in real conditions is much lower than the data given by the manufacturers. Therefore, there is a need to determine the optimal performance of the air purifier in real conditions in order to achieve the WHO recommended levels of safe indoor pollution with a maximum time interval of 1 hour, besides, taking into account that the air outside has a higher level of pollution with particles of PM 2.5. In this study, we strive to obtain a PM 2.5 value of 5 μg/m3 with a PM2.5 level in the air outside of 16.7 μg/m3. The calculated value of CADR for light pollution should be at least half of the power of the air purifier for the projected cleaning duration of no more than 1 hour. A smaller value of CADR leads to further accumulation of pollutants, which reduces the work of the cleaner. In this study, the value of CADR was at L=100 m3/hour the value of CADR= 59 m3/hour with the efficiency of filter inserts in 73% and natural sedimentation of particles in 25%, and at L=310 m3/hour the value of CADR= 59 m3/hour at efficiency of filter inserts in 94% and natural sedimentation of particles in 18%. The process of natural deposition and the amount of external pollution do not allow to clean the air without the use of mechanical filtration for any of the pollutants specified in the study.

Decarbonization of Heating and Cooling Systems of Buildings Located Nearby Surface Water Sources: Case Study

The study was carried out to evaluate theoretically and in laboratory conditions the capacity of a hybrid heating and cooling system that sustainably uses thermal energy extracted from surface waters in order to decarbonize buildings located near water sources. The novelty of the research consists in the realization of two experimental systems, one for the rapid evaluation of the performance of the water–water heat pump heating system and one for the evaluation of the operating behavior of a cooling system with fan coil units. Starting with the heating and cooling demand, and the climatic and hydrological local characteristics, a hybrid system model for the heating and cooling of the analyzed building was established and implemented. The forecasted energy consumption and CO2 emissions for the operation of the new equipment were compared with the historical values of the old systems with which the building was equipped (thermal energy supply from the district heating and cooling system with an air conditioning unit). Also, the results were extrapolated for forecasting the energy potential of the surface waters. The study highlights a percentage reduction in annual energy consumption of 67.71% and CO2 emissions of 80.13% through the implementation of the hybrid system.

Nematicidal Potential of Green Chiretta Extracts Against Meloidogyne enterolobii and M. Incognita: In vitro Assessment for Agricultural Application

Root-knot nematodes pose a persistent threat to various economically important crops in Thailand, with limited available management strategies for farmers. This study aimed to assess the efficacy of aqueous (AE), methanolic (ME), ethanolic (EE), ethyl acetate (EAE), and chloroform (CE) crude extracts derived from green chiretta in controlling Meloidogyne enterolobii and M. incognita under laboratory conditions. The results demonstrated significant inhibitory effects of all crude extracts, except for CE, against both nematode species. Notably, AE (10 and 20 mg/mL), ME (20 mg/mL), and EE (20 mg/mL) treatments exhibited maximum inhibition of hatching, leading to a considerable reduction in nematode hatch rates by 87.5 - 96.8 % for M. enterolobii and 88.5 - 96.5 % for M. incognita, compared with distilled water (DW). In terms of second-stage juveniles (J2s) mortality, AE (10 and 20 mg/mL), ME (20 mg/mL), and EAE (20 mg/mL) demonstrated the highest nematicidal activity, resulting in mortality rates of 94.2 - 100 % for M. enterolobii and 92.2 - 99.2 % for M. incognita. Chemotaxis assays revealed a repellent effect of all extracts on both nematode species, except for the ethyl acetate extract (EAE), which attracted M. incognita J2s without affecting M. enterolobii J2s. The observed efficacy was attributed to the higher concentrations of bioactive compounds, including flavonoids, phenolics, and terpenoids, in the extracts compared to CE. Based on these in vitro findings, it is suggested that AE, ME, EE, and EAE of green chiretta exhibit significant nematicidal activity against M. enterolobii and M. incognita. Further evaluation under greenhouse and field conditions is warranted to ascertain the practical applicability and effectiveness of these extracts in a real-world agricultural setting.

Investigation of Removing Asphaltene-Resin-Paraffin Deposits by Chemical Method for Azerbaijan High-Paraffin Oil Production Process

Asphaltene-resin-paraffin deposition (ARPD) is a complicated and prevalent issue in the oil and gas industry, impacting the efficiency and integrity of petroleum extraction, production, transportation and processing systems. Considering all witnessed ARPD problems in Azerbaijan oil fields, this paper proposed a chemical method and optimized the type and concentration of chemical inhibitors. Then, the effect of selected chemical reagents on inhibiting the ARPD amount and thus enhancing oil recovery was detected by reservoir simulation during both waterflooding and CO2 flooding production. Three new chemical compounds (namely, Chemical-A, Chemical-B and Chemical-C) were examined in laboratory conditions, and their impact on rheological properties of high-paraffin oilfield samples of Azerbaijan (X, Y and Z) were investigated. Experimental results show that Chemical-C with a concentration of 600 g/t has the best efficiency for alleviating the problems. After adding Chemical-C to the crude oil, the freezing point of oil was decreased from 12 °C to (−4) °C, the ARPD amount declined from 0.185 to 0.016 g, and oil effective viscosity was reduced from 16.2 mPa·s to 3.1 mPa·s. It was determined that for water and CO2 flooding, higher injection pressure resulted in reduced asphaltene precipitation. Adding the selected ARPD inhibitor, the oil recovery for waterflooding can increase from 52% to 62%, while it can rise from 55% to 68% for CO2 flooding.

Comprehensive risk assessment of the inhalation of plasticizers from the use of face masks

Disposable masks, formed mainly from polymers, often incorporate various chemical additives to enhance their performance. These additives, which include plasticizers, may be released during mask usage, presenting a novel source of human exposure to these compounds. In this study, the presence of 16 organophosphate esters (OPEs), 11 phthalates, and four alternative plasticizers, in four various types of face masks, were studied, as well as their release during simulated mask use (artificial laboratory conditions). Total plasticizer concentrations exhibited minimal variation across different mask types, with mean values of 7.27 µg/face mask for surgical, 8.61 µg/face mask for reusable, 11.0 µg/face mask for KN-95, and 13.9 µg/face mask for FFP2 masks. To explore plasticizer release behavior, inhalation experiments were conducted under different conditions. The findings revealed a significant temperature-dependent enhancement in plasticizer release from masks, subsequently increasing human inhalation exposure. The inhalation experiments showed variation in the release percentages, ranging from 0.1 to 95 %, depending on the specific compound and mask type. Notably, OPEs exhibited a mean release percentage of 1.0 %, similar to phthalates, which showed a 1.2 % release. Although alternative plasticizers were less frequently released, they still presented a notable percentage of release of 4.1 %. Daily intake estimations via inhalation ranged from 0.01 to 9.04 ng/kg body weight (bw)/day for these additives. Using these estimations, carcinogenic and non-carcinogenic risks associated with this exposure to these compounds were evaluated. All calculated values for the specific compounds studied in this paper remained below the established threshold limits. However, they do represent an additional exposure pathway that, when considered alongside other more predominant routes such as indoor/outdoor inhalation, dermal absorption, and dietary intake, makes the total exposure worthy of consideration.

Anthropogenic noise disrupts acoustic cues for recruitment.

Anthropogenic noise is rising and may interfere with natural acoustic cues used by organisms to recruit. Newly developed acoustic technology provides enriched settlement cues to boost recruitment of target organisms navigating to restoration sites, but can it boost recruitment in noise-polluted sites? To address this dilemma, we coupled replicated aquarium experiments with field experiments. Under controlled and replicated laboratory conditions, acoustic enrichment boosted recruitment by 2.57 times in the absence of anthropogenic noise, but yielded comparable recruitment in its presence (i.e. no boosting effect). Using the same technique, we then tested the replicability of these responses in real-world settings where independently replicated 'sites' are unfeasible owing to the inherent differences in soundscapes. Again, acoustic enrichment increased recruitment where anthropogenic noise was low (by 3.33 times), but had no effect at a site of noise pollution. Together, these coupled laboratory-to-field outcomes indicate that anthropogenic noise can mask the signal of acoustic enrichment. While noise pollution may reduce the effectiveness of acoustic enrichment, some of our reported observations suggest that anthropogenic noise per se might also provide an attractive cue for oyster larvae to recruit. These findings underscore the complexity of larval behavioural responses to acoustic stimuli during recruitment processes.

Dual-Mode Fluorescent/Intelligent Lateral Flow Immunoassay Based on Machine Learning Algorithm for Ultrasensitive Analysis of Chloroacetamide Herbicides.

Given the harmful effect of pesticide residues, it is essential to develop portable and accurate biosensors for the analysis of pesticides in agricultural products. In this paper, we demonstrated a dual-mode fluorescent/intelligent (DM-f/DM-i) lateral flow immunoassay (LFIA) for chloroacetamide herbicides, which utilized horseradish peroxidase-IgG conjugated time-resolved fluorescent nanoparticle probes as both a signal label and amplification tool. With the newly developed LFIA in the DM-f mode, the limits of detection (LODs) were 0.08 ng/mL of acetochlor, 0.29 ng/mL of metolachlor, 0.51 ng/mL of Propisochlor, and 0.13 ng/mL of their mixture. In the DM-i mode, machine learning (ML) algorithms were used for image segmentation, feature extraction, and correlation analysis to obtain multivariate fitted equations, which had high reliability in the regression model with R2 of 0.95 in the range of 2 × 102-2 × 105 pg/mL. Importantly, the practical applicability was successfully validated by determining chloroacetamide herbicides in the corn sample with good recovery rates (85.4 to 109.3%) that correlate well with the regression model. The newly developed dual-mode LFIA with reduced detection time (12 min) holds great potential for pesticide monitoring in equipment-limited environments using a portable test strip reader and laboratory conditions using ML algorithms.

Detoxification of contaminated soils from hydrocarbon rocket fuel used in «Soyuz» launch vehicles using the bioremediation method

Rocket and space activities are developing worldwide, but environmental concerns are overlooked in pursuing new technologies. The Republic of Kazakhstan's "Baikonur" Cosmodrome routinely launches rockets in emergencies, causing toxic fuel to spill onto and contaminate the soil. This study examines the effect of T-1 kerosene, a hydrocarbon rocket fuel of toxic hazard class 4, on the soil microbial community from the aeration zone in laboratory conditions. In three different soil samples, 15 g/kg, 30 g/kg, and 50 g/kg of T-1 kerosene were tested according to their utilization by microbes throughout three, ten, and thirty days.Based on scientific research, several strains of microorganisms were able to utilize T-1 kerosene rocket fuel, such as Acinetobacter calcoaceticum-18, Bacillus sp.-20, Micrococcus roseus-25, and Candida sp.-12/5, purifying it from 70 to 90 %. According to a study conducted after 30 days of microbiological detoxification of calcisols (loamic) (site 196) and dystric arenosols (site 31), with an initial load of 50 g/kg of T-1 kerosene, the concentration was determined. Microorganisms that produce 5 + 20 (99.83 %) and 18+20+25+12/5 (99.80 %) oil products are well utilized. During decontamination of soils contaminated with hydrocarbons was found to be present in the soil after 60 days when microorganism № 20 was used at 9.3 mg/kg, and the association of microorganism 5 + 25 at 8.88 mg/kg. The article describes the developed technology for soil detoxification using the microbiological method.

Is Ambrosia trifida L. Preparing for a Wider Invasion? Changes in the Plant Morpho-Functional Traits over a Decade

Plastic traits are argued to favor the establishment of invasive alien plants and to evolve during the invasion process, so that invasions may be favored by both plasticity and evolutionary changes in plasticity. Despite this aspect being pivotal to understanding invasion processes, no information is available about the effect of residence time on the evolution of phenotypic plasticity of aliens to produce locally adapted phenotypes. Therefore, we aimed to evaluate changes in the morpho-functional traits of the invasive alien Ambrosia trifida L. over time. Specifically, we grew A. trifida plants under laboratory (at different temperatures: 10 °C, 20 °C and 25 °C) and field conditions by using seeds collected from 2011 to 2020 from an Eastern European population. Data about seedling emergence, vegetative (laboratory and field) and reproductive (field) traits were collected, e.g., maximum plant height (cm), total dry biomass (g), number of flowers (n) and number of new seeds (n). Analysis of variance (ANOVA), linear regressions and a plasticity index were applied to assess differences in plant performances when grown from seeds of different ages. An auto-regressive integrated moving average (ARIMA) model was applied to predict future trends of some key plant traits (maximum height, total dry biomass and number of new seeds). Overall, the time of seedling emergence was not statistically different among seeds of different age, and regression analyses exhibited a positive relationship between residence time (seed age) and vegetative and reproductive parameters of A. trifida. Only male flower production exhibited a negative trend over time. At all temperatures (especially at 25 °C), the vegetative parameters increased with the decrease in residence time. The plasticity index of the measured traits tended to decrease over time for most traits both in the field and in the laboratory trials. The ARIMA model predicted that plant traits will continue to increase in size over time by 2030, suggesting further plastic adaptation of A. trifida. The results highlighted that residence time influences the evolution of phenotypic plasticity of A. trifida, which has strengthened its adaptability to the new conditions over a decade, also demonstrating a great adaptive and invasion potential for the future.

Micropropagation and optimisation of in vitro production of the rare and threatened moss Entosthodon pulchellus (Funariaceae)

The establishment of axenic cultures and the propagation of the rare moss Entosthodon pulchellus (H. Philip.) Brugués (Funariaceae), as well as the optimisation of its ex situ growth conditions and rapid biomass production were the goals of this study. The results obtained also provide insights into the developmental biology of this moss in in vitro conditions, particularly regarding basal media contents with or without supplements of selected plant growth regulators or sugars, i.e. its nutritional needs. The procedure for establishing axenic cultures of this rare and threatened moss species is described. The optimisation protocol of the growth and production conditions is elaborated. The spore germinability of dried herbarium samples remained rather high in the tested laboratory conditions. Suitability tests on different media types showed KNOP basal media to be the best fit for the rapid biomass production of both secondary protonemata and leafy gametophores, without the addition of sugars or plant growth regulators. However, sugar, namely sucrose, induced rapid and massive protonemal development and can be used when this developmental stage is needed.

Methanogenic patterns in the gut microbiome are associated with survival in a population of feral horses

Gut microbiomes are widely hypothesised to influence host fitness and have been experimentally shown to affect host health and phenotypes under laboratory conditions. However, the extent to which they do so in free-living animal populations and the proximate mechanisms involved remain open questions. In this study, using long-term, individual-based life history and shallow shotgun metagenomic sequencing data (2394 fecal samples from 794 individuals collected between 2013–2019), we quantify relationships between gut microbiome variation and survival in a feral population of horses under natural food limitation (Sable Island, Canada), and test metagenome-derived predictions using short-chain fatty acid data. We report detailed evidence that variation in the gut microbiome is associated with a host fitness proxy in nature and outline hypotheses of pathogenesis and methanogenesis as key causal mechanisms which may underlie such patterns in feral horses, and perhaps, wild herbivores more generally.

Chitosan-strigolactone mimics with synergistic effect: A new concept for plant biostimulants

The paper reports new multifunctional plant biostimulant formulations obtained via in situ hydrogelation of chitosan with salicylaldehyde in the presence of a mimetic naphthalimide-based strigolactone, in specific conditions. Various analytical techniques (FTIR, 1H NMR, SEM, POM, TGA, WRXD) were employed to understand the particularities of the hydrogelation mechanism and its consequences on the formulations' properties. Further, in order to evaluate their potential for the targeted application, the swelling in media of pH characteristic for different soils, water holding capacity, soil biodegradability, in vitro release of the strigolactone mimic and impact on tomatoes plant growth in laboratory conditions were investigated and discussed. It was found that the strigolactone mimic has the ability to bond to the chitosan matrix via physical forces, favoring a prolonged release. Moreover, the combination of chitosan with the strigolactone mimic in an optimal mass ratio triggered a synergistic effect on the plant growth, up to 4 times higher compared to the neat control soil.

Exploring Natural Solutions: Botanical Approaches for Controlling Early Blight in Tomato Plants under Laboratory Conditions

Around the world, Alternaria solani is the culprit behind the deadly and devastating early blight of tomatoes. To control the mycelial growth of A. solani in this investigation, a concentration of 10% for each plant extract was examined using the poison food technique. In comparison to the control, the pathogen mycelial growth was greatly suppressed by all examined extracts. With a 90.54% inhibition at 10% concentration, garlic clove extract proved to be the most successful of the extracts. Other extracts that showed promise were neem leaf extract (87.83%), ginger (83.78%), eucalyptus (75.67%), bael (71.67%), onion bulb extract (68.67%), and ashwagandha (63.51%). On the other hand, with a mycelial growth of 35 mm and 52.70% inhibition, lantana proved to be the least successful. After seven days of incubation at 24°C, the chemical fungicide mancozeb proved to be the most effective overall, offering a 93.24% inhibition at a 0.25% dose. Chemicals pose health dangers even though farmers use them extensively to control tomato rot. This study provides useful information for farmers by highlighting appropriate plant extracts as less risky substitutes for treating tomato early blight.