L929 Fibroblasts Research Articles

Non-clinical investigations about cytotoxic and anti-platelet activities of gamma-terpinene.

Gamma-terpinene (γ-TPN) is a cyclohexane monoterpene isolated from plant essential oils, such as tea tree (Melaleuca alternifolia), oregano (Origanum vulgare), rosemary (Rosmarinus officinalis L.), thyme (Thymus vulgaris Marchand), and eucalyptus (Eucalyptus sp.). Terpenes are widely studied molecules pharmacologically active on the cardiovascular system, hemostasis, and antioxidant actions. Herein, it was investigated the cytotoxic and antiplatelet activity of γ-TPN using different non-clinical laboratory models. For in silico evaluation, the PreADMET, SwissADME, and SwissTargetPrediction softwares were used. Molecular docking was performed using the AutoDockVina and BIOVIA Discovery Studio databases. The cytotoxicity of γ-TPN was analyzed by the MTT assay upon normal murine endothelial SVEC4-10 and fibroblast L-929 cells. Platelet aggregation was evaluated with platelet-rich (PRP) and platelet-poor (PPP) plasma from spontaneously hypertensive rats (SHR), in addition to SVEC4-10 cells pre-incubated with γ-TPN (50, 100, and 200 µM) for 24 h. SHR animals were pre-treated by gavage with γ-TPN for 7 days and divided into four groups (negative control, 25, 50, and 100 mg/kg). Blood samples were collected to measure nitrite using the Griess reagent. Gamma-TPN proved to be quite lipid-soluble (Log P = +4.50), with a qualified profile of similarity to the drug, good bioavailability, and adequate pharmacokinetics. It exhibited affinity mainly for the P2Y12 receptor (6.450 ± 0.232 Kcal/mol), moderate cytotoxicity for L-929 (CC50 = 333.3 µM) and SVEC 4-10 (CC50 = 366.7 µM)cells. The presence of γ-TPN in SVEC 4-10 cells was also able to reduce platelet aggregation by 51.57 and 44.20% at lower concentrations (50 and 100 µM, respectively). Then, γ-TPN has good affinity with purinergic receptors and an effect on the reversal of platelet aggregation and oxidative stress, being promising and safe for therapeutic targets and subsequent studies on the control of thromboembolic diseases.

Polysilsesquioxane decorated ZIF-8 as a potential pH-responsive vehicle for topical delivery and release of acyclovir and tetracycline: Investigation of blood compatibility, cytotoxicity and antibacterial properties

In this research, poly-chloropropylmethyl-silsesquioxanen was prepared and decorated with ZIF-8 in order to investigate its loading capacity for acyclovir and tetracycline. Before and after drug loadings, the composites were characterized by FT-IR, SEM-EDS, XRD, and XPS analyses. Then, the in-vitro release of these drugs was investigated by UV–Vis spectroscopy in different buffers (pH = 5, 7.4, and 9.1). The results showed that the release of ACV reached a maximum amount of 41.3 mg at pH = 7.4 during 12 h. In comparison, the release of TC reached a maximum amount of 22.5 mg at pH = 5 during 6 h. The blood compatibility, in-vitro cytotoxicity on the L929 fibroblast cells line, and antibacterial assay against Staphylococcus aureus and Pseudomonas aeruginosa were also investigated for this composite as a drug carrier.

Preparation of recombinant mussel mucin Mfp-3P and its promotion of wound healing

To investigate the role of recombinant mussel mucin in wound healing, we aimed to prepare this mucin using Pichia pastoris as the host microbe. Our method involved constructing a genetically engineered strain of P. pastoris that expressed a fusion protein consisting of Mfp-3 and preCol-P peptide segments of mussel. After fermentation and purification, we obtained a pure recombinant mussel mucin product. We then conducted experiments to evaluate its effect at both the cellular and animal levels. At the cellular level, we examined its impact on the proliferation and migration of mouse fibroblast L929. At the animal level, we assessed its ability to promote wound healing after full-layer skin resection in rats. Our results showed that the recombinant mussel mucin protein has a content of 90.28% and a purity of 96.49%. The content of 3,4-dihydroxyphenylalanine (DOPA) was 0.73 wt%, and the endotoxin content was less than 0.5 EU/mg. Importantly, the recombinant mussel mucin protein significantly promoted both the migration and proliferation of mouse fibroblast, as well as the wound healing in rat skin. In conclusion, our findings demonstrate that recombinant mussel mucin has the potential to promote wound healing and can be considered a promising medical biomaterial.

Polydopamine Coating of Graphitic Carbon Nitride, g-C3N4, Improves Biomedical Application.

Graphitic carbon nitride (g-C3N4) is an intriguing nanomaterial that exhibits photoconductive fluorescence properties under UV-visible light. Dopamine (DA) coating of g-C3N4 prepared from melamine was accomplished via self-polymerization of DA as polydopamine (PDA). The g-C3N4 was coated with PDA 1, 3, and 5 times repeatedly as (PDA@g-C3N4) in tris buffer at pH 8.5. As the number of PDA coatings was increased on g-C3N4, the peak intensity at 1512 cm-1 for N-H bending increased. In addition, the increased weight loss values of PDA@g-C3N4 structures at 600 °C from TGA thermograms confirmed that the coating was accomplished. The band gap of g-C3N4, 2.72 eV, was reduced to 0.87 eV after five coatings with PDA. A pristine g-C3N4 was found to have an isoelectric point (IEP) of 4.0, whereas the isoelectric points of 1PDA@g-C3N4 and 3PDA@g-C3N4 are close to each other at 3.94 and 3.91, respectively. On the other hand, the IEP of 5PDA@g-C3N4 was determined at pH 5.75 assuming complete coating with g-C3N4. The biocompatibility of g-C3N4 and PDA@g-C3N4 against L929 fibroblast cell lines revealed that all PDA@g-C3N4 coatings were found to be biocompatible up to a 1000 mg/mL concentration, establishing that PDA coatings did not adversely affect the biocompatibility of the composite materials. In addition, PDA@g-C3N4 was screened for antioxidant potential via total phenol content (TPC) and total flavonoid content assays and it was found that PDA@g-C3N4 has recognizable TPC values and increased linearly with an increased number of PDA coatings. Furthermore, blood compatibility of pristine g-C3N4 is enhanced considerably upon PDA coating, affirmed by hemolysis and the blood clotting index%. Additionally, α-glucosidase inhibitory properties of PDA@g-C3N4 structures revealed that 67.6 + 9.8% of this enzyme was evenly inhibited by 3PDA@g-C3N4 structure.

Effects of montmorillonite on the loading and release of Piper betle L. extract applied for wound dressing based on chitosan/polyvinyl alcohol

In this study, we investigate the influence of montmorillonite (MMT) on the loading and release of Piper betle L. extract (PLE)–a medicinal herb containing active secondary metabolites with antibacterial, antioxidant, and anti–inflammatory effects. MMT (1 %, 3 %, 5 %) was blended into the chitosan/polyvinyl alcohol (CS/PVA) biocomposite film by the solution evaporation method, and then PLE was loaded onto this biocomposite using the immersion method. The tensile strength and the ability to absorb exudates of the CS/PVA film improved with the increase in MMT content. The MMT 3 % film was considered to have the best properties: good mechanical properties with a tensile strength of 27.44 ± 0.27 MPa and elongation at break of 14.57 ± 0.30 %, potential for wound dressing due to its ability to absorb wound exudate (swelling degree 61.70 ± 0.30 %) and a suitable water vapor transmission rate (1999 ± 47 g/m2·d). The presence of MMT (1 %, 3 %, 5 %) in the CS/PVA film led to an increase in the PLE loading efficiency of the films compared to the film without MMT, up to 1.65, 1.73, and 1.87 times, respectively. The MMT 3 % and 5 % films also exhibited a sustained PLE release effect for up to 24 h. MMT increased PLE bioavailability through bioactivity tests: antibacterial activity against both E. coli and S. aureus, antioxidant activity, effective healing of 2nd–degree burn wounds, and biocompatibility with the L929 fibroblasts cell line. The combination of physicochemical properties and biological activities proved that the MMT/PLE drug delivery system based on the CS/PVA biocomposite is promising for wound dressing.

Tumor- and Fibroblast-Derived Cell-Free DNAs Differently Affect the Progression of B16 Melanoma In Vitro and In Vivo.

It is widely postulated that the majority of pathologically elevated extracellular or cell-free DNA (cfDNA) in cancer originates from tumor cells; however, evidence has emerged regarding the significant contributions of other cells from the tumor microenvironment. Here, the effect of cfDNA originating from murine B16 melanoma cells and L929 fibroblasts on B16 cells was investigated. It was found that cfDNAL929 increased the viability and migration properties of B16 cells in vitro and their invasiveness in vivo. In contrast, cfDNAB16 exhibited a negative effect on B16 cells, reducing their viability and migration in vitro, which in vivo led to decreased tumor size and metastasis number. It was shown that cell treatment with both cfDNAs resulted in an increase in the expression of genes encoding DNases and the oncogenes Braf, Kras, and Myc. cfDNAL929-treated cells were shown to experience oxidative stress. Gene expression changes in the case of cfDNAB16 treatment are well correlated with the observed decrease in proliferation and migration of B16 cells. The obtained data may indicate the possible involvement of fibroblast DNA in the tumor microenvironment in tumor progression and, potentially, in the formation of new tumor foci due to the transformation of normal cells.

Rationally designed β-cyclodextrin-crosslinked polyacrylamide hydrogels for cell spheroid formation and 3D tumor model construction

In vitro tumor models are essential for understanding tumor behavior and evaluating tumor biological properties. Hydrogels that can mimic the tumor extracellular matrix have become popular for creating 3D in vitro tumor models. However, designing biocompatible hydrogels with appropriate chemical and physical properties for constructing tumor models is still a challenge. In this study, we synthesized a series of β-cyclodextrin (β-CD)-crosslinked polyacrylamide hydrogels with different β-CD densities and mechanical properties and evaluated their potential for use in 3D in vitro tumor model construction, including cell capture and spheroid formation. By utilizing a combination of β-CD-methacrylate (CD-MA) and a small amount of N,N′-methylene bisacrylamide (BIS) as hydrogel crosslinkers and optimizing the CD-MA/BIS ratio, the hydrogels performed excellently for tumor cell 3D culture and spheroid formation. Notably, when we co-cultured L929 fibroblasts with HeLa tumor cells on the hydrogel surface, co-cultured spheroids were formed, showing that the hydrogel can mimic the complexity of the tumor extracellular matrix. This comprehensive investigation of the relationship between hydrogel mechanical properties and biocompatibility provides important insights for hydrogel-based in vitro tumor modeling and advances our understanding of the mechanisms underlying tumor growth and progression.

Conformation Controlled Hydrogelation of Minimalistic α, γ Hybrid Peptide.

A majority of short peptide (≤7 amino acids) hydrogels are primarily assembled via cross β-structure formation. In contrast to the natural trend, herein, we report the formation of supramolecular hydrogel from the ultrashort hybrid folded peptide composed of canonical α-amino acid and noncanonical γ-amino acid, Fmoc-γPhe-Phe-OH. The designed hybrid peptide hydrogel is composed of entangled fibers, has viscoelastic properties, exhibits proteolytic stability, and exhibits cytocompatibility with L929 fibroblast cells. Mutating the peptide sequence by altering the position of γPhe from the N-termini to C-termini transforms the self-assembly into crystalline aggregates. Combining FTIR, 2D NMR, and DFT calculations revealed that the hydrogel-forming peptide adopts a C9 H-bonded conformation, resembling the well-known γ-turn. However, the isomeric hybrid peptide adopts an extended structure. The present study highlights the importance of secondary structure in the higher order assembly of minimalist hybrid peptides and broadens the range of secondary structures to design short peptide-based hydrogels.

Development of thymol-loaded polymeric films designed as wound dressing materials: Physical, antioxidant, antibacterial, cytocompatibility, and wound healing properties

In the presented study, the potential of thymol-loaded films consisting of pullulan (PUL) and kappa carrageenan (CARR) to be used as wound dressing materials was examined. The films were characterized by FTIR (Fourier transform infrared), TGA (thermogravimetric analysis) and SEM (scanning electron microscopy) analyses. Swelling and hydrolytic degradation behavior, water vapor permeability rate, and mechanical properties, which are important parameters for the films to be evaluated as wound dressing materials, were determined. Antioxidant and antibacterial activities of the films were examined. Additionally, in vitro cytotoxicity and in vitro wound healing activity of the films were evaluated in the L929 fibroblast cell line. The results show that the non-toxic biopolymeric film containing 5 % thymol has the potential to be a promising antioxidant and antibacterial wound dressing, effectively reducing the scratch open area for wound dressing application.

Hemocompatibility and Preangiogenic Attributes of SiBxCyNzOm Coatings for Biomedical Applications.

In current clinical practices related to orthopedics, dental, and cardiovascular surgeries, a number of biomaterial coatings, such as hydroxyapatite (HAp), diamond-like carbon (DLC), have been used in combination with metallic substrates (stainless steel, Ti6Al4V alloy, etc.). Although SiBCN coatings are widely explored in material science for diverse applications, their potential remains largely unexplored for biomedical applications. With this motivation, the present work reports the development of SiBxCyNzOm coatings on a Ti6Al4V substrate, employing a reactive radiofrequency (RF) magnetron sputtering technique. Three different coating compositions (Si0.27B0.10C0.31N0.07O0.24, Si0.23B0.06C0.21N0.22O0.27, and Si0.20B0.05C0.19N0.20O0.35) were obtained using a Si2BC2N target and varying nitrogen flow rates. The hydrophilic properties of the as-synthesized coatings were rationalized in terms of an increase in the number of oxygen-containing functional groups (OH and NO) on the surface, as probed using XPS and FTIR analyses. Furthermore, the cellular monoculture of SVEC4-10 endothelial cells and L929 fibroblasts established good cytocompatibility. More importantly, the coculture system of SVEC4-10 and L929, in the absence of growth factors, demonstrated clear cellular phenotypical changes, with extensive sprouting leading to tube-like morphologies on the coating surfaces, when stimulated using a customized cell stimulator (StimuCell) with 1.15 V/cm direct current (DC) electric field strength for 1 h. In addition, the hemocompatibility assessment using human blood samples revealed clinically acceptable hemolysis, less erythrocyte adhesion, shorter plasma recalcification, and reduced risk for thrombosis on the SiBxCyNzOm coatings, when compared to uncoated Ti6Al4V. Taken together, the present study unambiguously establishes excellent cytocompatibility, hemocompatibility, and defines the preangiogenic properties of SiBxCyNzOm bioceramic coatings for potential biomedical applications.

Safety and effectiveness of an antiseptic wound cleansing and irrigation solution containing polyhexamethylene biguanide.

There is currently a wide range of cleansing and irrigation solutions available for wounds, many of which contain antimicrobial agents. The aim of this study was to assess the safety of HydroClean Solution (HARTMANN, Germany), a polyhexamethylene biguanide (PHMB)-containing irrigation solution, in a standard cytotoxicity assay, and to assess its effect in a three-dimensional (3D) full-thickness model of human skin. A number of commercially available wound cleansing and irrigation solutions, including the PHMB-containing irrigation solution, were tested in a cytotoxicity assay using L929 mouse fibroblasts (ISO 10993-5:2009). The PHMB-containing irrigation solution was then assessed in an in vitro human keratinocyte-fibroblast 3D full-thickness wounded skin model to determine its effect on wound healing over six days. The effect of the PHMB-containing irrigation solution on tissue viability was measured using a lactate dehydrogenase (LDH) assay, and proinflammatory effects were measured using an interleukin-6 (IL-6) production assay. The PHMB-containing irrigation solution was shown to be equivalent to other commercially available cleansing and irrigation solutions when tested in the L929 fibroblast cytotoxicity assay. When assessed in the in vitro 3D human full-thickness wound healing model, the PHMB-containing irrigation solution treatment resulted in no difference in levels of LDH or IL-6 when compared with levels produced in control Dulbecco's phosphate-buffered saline cultures. There was, however, a pronounced tissue thickening of the skin model in the periwound region. The experimental data presented in this study support the conclusion that the PHMB-containing irrigation solution has a safety profile similar to other commercially available cleansing and irrigation solutions. Evidence also suggests that the PHMB-containing irrigation solution does not affect tissue viability or proinflammatory cytokine production, as evidenced by LDH levels or the production of IL-6 in a 3D human full-thickness wound healing model. The PHMB-containing irrigation solution stimulated new tissue growth in the periwound region of the skin model.

ULK1 Mediated Autophagy-Promoting Effects of Rutin-Loaded Chitosan Nanoparticles Contribute to the Activation of NF-κB Signaling Besides Inhibiting EMT in Hep3B Hepatoma Cells.

Liver cancer remains to be one of the leading causes of cancer worldwide. The treatment options face several challenges and nanomaterials have proven to improve the bioavailability of several drug candidates and their applications in nanomedicine. Specifically, chitosan nanoparticles (CNPs) are extremely biodegradable, pose enhanced biocompatibility and are considered safe for use in medicine. CNPs were synthesized by ionic gelation, loaded with rutin (rCNPs) and characterized by ultraviolet-visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FTIR), dynamic light scattering (DLS) and transmission electron microscopy (TEM). The rCNPs were tested for their cytotoxic effects on human hepatoma Hep3B cells, and experiments were conducted to determine the mechanism of such effects. Further, the biocompatibility of the rCNPs was tested on L929 fibroblasts, and their hemocompatibility was determined. Initially, UV-vis and FTIR analyses indicated the possible loading of rutin on rCNPs. Further, the rutin load was quantitatively measured using Ultra-Performance Liquid Chromatography (UPLC) and the concentration was 88 µg/mL for 0.22 micron filtered rCNPs. The drug loading capacity (LC%) of the rCNPs was observed to be 13.29 ± 0.68%, and encapsulation efficiency (EE%) was 19.55 ± 1.01%. The drug release was pH-responsive as 88.58% of the drug was released after 24 hrs at the lysosomal pH 5.5, whereas 91.44% of the drug was released at physiological pH 7.4 after 102 hrs. The cytotoxic effects were prominent in 0.22 micron filtered samples of 5 mg/mL rutin precursor. The particle size for the rCNPs at this concentration was 144.1 nm and the polydispersity index (PDI) was 0.244, which is deemed to be ideal for tumor targeting. A zeta potential (ζ-potential) value of 16.4 mV indicated rCNPs with good stability. The IC50 value for the cytotoxic effects of rCNPs on human hepatoma Hep3B cells was 9.7 ± 0.19 μg/mL of rutin load. In addition, the increased production of reactive oxygen species (ROS) and changes in mitochondrial membrane potential (MMP) were observed. Gene expression studies indicated that the mechanism for cytotoxic effects of rCNPs on Hep3B cells was due to the activation of Unc-51-like autophagy-activating kinase (ULK1) mediated autophagy and nuclear factor kappa B (NF-κB) signaling besides inhibiting the epithelial-mesenchymal Transition (EMT). In addition, the rCNPs were less toxic on NCTC clone 929 (L929) fibroblasts in comparison to the Hep3B cells and possessed excellent hemocompatibility (less than 2% of hemolysis). The synthesized rCNPs were pH-responsive and possessed the physicochemical properties suitable for tumor targeting. The particles were effectively cytotoxic on Hep3B cells in comparison to normal cells and possessed excellent hemocompatibility. The very low hemolytic profile of rCNPs indicates that the drug could be administered intravenously for cancer therapy.

Design, fabrication, and evaluation of keratin and pectin incorporated supramolecular structured zero-oxidation state selenium nanogel blended 3D printed transdermal patch

This study investigates the synthesis of selenium nanoparticles (SeNPs), owing to the low cost and abundance of selenium. However, the toxicity of SeNP prompts the development of a selenium nanocomposite (SeNC) containing pectin, keratin, and ferulic acid to improve the bioactivity of Se[0]. Further, incorporating the SeNC in a suitable formulation for drug delivery as a transdermal patch was worth studying. Accordingly, various analytical techniques were used to characterize the SeNPs and the SeNC, confirming successful synthesis and encapsulation. The SeNC exhibited notable particle size of 448.2 ± 50.2 nm, high encapsulation efficiency (98.90 % ± 2.4 %), 28.1 ± 0.45 drug loading, and sustained drug release at pH 5.5. Zeta potential and XPS confirmed the zero-oxidation state. The supramolecular structure was evident from spectral analysis endorsing the semi-crystalline nature of the SeNC and SEM images showcasing flower-shaped structures. Further, the SeNC demonstrated sustained drug release (approx. 22 % at 48 h) and wound-healing potential in L929 fibroblast cells. Subsequently, the SeNC loaded into a gelling agent exhibited shear thinning properties and improved drug release by nearly 58 %. A 3D printed reservoir-type transdermal patch was developed utilizing the SeNC-loaded gel, surpassing commercially available patches in characteristics such as % moisture uptake, tensile strength, and hydrophobicity. The patch, evaluated through permeation studies and CAM assay, exhibited controlled drug release and angiogenic properties for enhanced wound healing. The study concludes that this patch can serve as a smart dressing with tailored functionality for different wound stages, offering a promising novel drug delivery system for wound healing.

A preliminary study on the impact of nutrient stress induction on drug cytotoxicity in glioblastoma cells and fibroblasts

Abstract Background Nutrient stress (NS), one of the hallmarks of the tumour microenvironment, can render cancer cells tolerant to cytotoxicity. Fibroblasts, on the other hand, have cancer cell-like traits, such as plasticity and resiliency. Hence, this study aimed to evaluate the cytotoxicity of the drug on reseeded human U87 glioblastoma (GBM) cells as well as on mouse L929 fibroblasts in the form of monolayer and colonies that grew after NS induction. Results No treatment for 48 h showed a statistically significant difference in U87 cell viability when compared to the 50% hypothetical value. However, temozolomide (TMZ) (151.0 µg/ml) and azithromycin (AZI) (92.0 µg/ml) significantly diminished the number of U87 cell colonies compared to the untreated control, and AZI also outperformed doxycycline (DOXY) (147.0 µg/ml). L929 fibroblasts survived NS, but the cytotoxicity of AZI, DOXY, and AZI + DOXY (92.0 + 147.0 µg/ml) substantially increased than in L929 fibroblasts without NS induction. Conclusions The present findings suggest that NS does not inevitably contribute to cytotoxic drug tolerance in GBM cells. In addition, although fibroblasts can withstand NS, they can also become susceptible to cytotoxic drug-induced death; nevertheless, the type of drug may play a role. Graphical Abstract

Antibacterial and anti-inflammatory Bi-functional carbon dots hydrogel dressing for robust promotion of wound healing

The abuse of antibiotics leading to bacterial resistance has emerged as a significant impediment to wound healing. Consequently, this study developed antibacterial and anti-inflammatory bi-functional carbon dots (AAB-CDs) as the primary active material for the preparation of hydrogel wound dressings, aiming to promote wound healing. The synthesized AAB-CDs exhibited ultra-small size (2.3 nm), abundant surface functional groups, high Zeta potential (30.9 mV), and excellent biocompatibility. The positively charged AAB-CDs with outstanding antibacterial properties, mitigating the risk of bacterial resistance, while the abundant surface functional groups imparted stable antioxidant performance for sustained wound anti-inflammatory effects. Moreover, in vitro experiments demonstrated that the hydrogel dressings exhibited remarkable antibacterial properties against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), and significantly promoted the proliferation of L929 fibroblasts. In vivo experiments further substantiated the feasibility of the hydrogel dressings in promoting wound healing and histological analysis revealed the biological mechanisms underlying the promotion of wound healing. In conclusion, AAB-CDs with robust antibacterial and anti-inflammatory properties hold tremendous potential for promoting wound healing, providing practical insights for the biological application of CDs.

Transdermal delivery system to release phthalocyanine photosensitizers for the potential treatment of skin cancer with PDT.

This research aims to examine the transdermal release of water-soluble indium and zinc metallo phthalocyanine (InPc and ZnPc) compounds from the poly(vinyl alcohol) (PVA) membrane and the cytotoxicity effect of these Pcs on normal mouse fibroblasts (L929 fibroblast) and human melanoma (SK-MEL-30) cells. For this purpose, the effects of temperature, pH, drug concentration and membrane thickness on transdermal release were investigated in order to obtain the optimum transdermal release profile by preparing PVA membranes with different thicknesses and crosslinked by heat treatment. Optimum drug release was found to be 85.36% using 6 μm thick PVA membrane at 37 ± 0.5 °C, when upper cell pH 1.2 and lower cell pH 5.5, for 3 mg/mL InPc drug concentration. Under the same conditions, the drug release value for ZnPc was found to be 69.78%. In addition, in vitro studies were performed on L929 and SK-MEL-30 cells. under optimized drug (InPc and ZnPc) and membrane conditions. It was found that no significant cytotoxic effect was observed in L929 and SK-MEL-30 cells in the dark. Photodynamic tests were also carried out with InPc and ZnPc. The results show that cell viability decreases in SK-MEL-30 cells at concentrations of 10 μg/mL and above. In addition, while the InPc IC50 value was determined as 4.058 μg/mL, this value was determined as 11.574 μg/mL for ZnPc.

Preparing gelatin-containing polycaprolactone / polylactic acid nanofibrous membranes for periodontal tissue regeneration using side-by-side electrospinning technology.

Electrospinning technology has recently attracted increased attention in the biomedical field, and preparing various cellulose nanofibril membranes for periodontal tissue regeneration has unique advantages. However, the characteristics of using a single material tend to make it challenging to satisfy the requirements for a periodontal barrier film, and the production of composite fibrous membranes frequently impacts the quality of the final fiber membrane due to the influence of miscibility between different materials. In this study, nanofibrous membranes composed of polylactic acid (PLA) and polycaprolactone (PCL) fibers were fabricated using side-by-side electrospinning. Different concentrations of gelatin were added to the fiber membranes to improve their hydrophilic properties. The morphological structure of the different films as well as their composition, wettability and mechanical characteristics were examined. The results show that PCL/PLA dual-fibrous composite membranes with an appropriate amount of gelatin ensures sufficient mechanical strength while obtaining improved hydrophilic properties. The viability of L929 fibroblasts was evaluated using CCK-8 assays, and cell adhesion on the scaffolds was confirmed by scanning electron microscopy and by immunofluorescence assays. The results demonstrated that none of the fibrous membranes were toxic to cells and the addition of gelatin improved cell adhesion to those membranes. Based on our findings, adding 30% gelatin to the membrane may be the most appropriate content for periodontal tissue regeneration, considering the scaffold's mechanical qualities, hydrophilic properties and biocompatibility. In addition, the PCL-gelatin/PLA-gelatin dual-fibrous membranes prepared using side-by-side electrospinning technology have potential applications for tissue engineering.

Photoactive cationic conjugated microporous polymers containing pyrimidine with an ‘adsorption-kill’ antibacterial strategy for infected wound healing

Pathogenic bacterial invasion leads to severe inflammation that hinders wound healing, and it has become a major medical threat worldwide. Photodynamic therapy (PDT) has emerged as a promising strategy for treating microbial infection; however, developing a dressing with PDT effect and excellent biological functions poses a formidable challenge. Herein, a novel cationic pyrimidine-modified conjugated microporous polymer, BPyMe-CMP, was rationally designed and synthesized via a Sonogashira-Hagiwara and SN2 substitution reaction. The BPyMe-CMP exhibited weak interfacial charge transfer resistance and demonstrated superior photoinducible carrier separation, thereby displaying an excellent photoelectric response. Consequently, the BPyMe-CMP could readily generate reactive oxygen species under visible light irradiation to kill bacteria. In addition to enhancing the photogenerated electron transfer process, BPyMe-CMP also provided abundant attraction sites for bacteria to reinforce the antibacterial ability. The deposition of BPyMe-CMP onto polyvinyl alcohol-modified silk fibroin (SF/PVA) film served as a wound dressing to promote healing. The in vitro and in vivo experiments revealed that the SF/PVA@BPyMe-CMP induced M2-type macrophage polarization, promoted L929 fibroblast migration, exhibited bactericidal activity, and induced angiogenesis, which synergistically accelerated the healing of methicillin-resistant Staphylococcus aureus-infected wounds. This study provides data support to advance the construction of a multi-functional wound dressing based on pyrimidination and cationization for the treatment and rapid healing of infected wounds.

Evaluation of cytocompatibility and cell proliferation of electrospun chitosan/polyvinyl alcohol/montmorillonite clay scaffold with l929 cell lines in skin regeneration activity and in silico molecular docking studies

The present investigation describes the development of a novel Chitosan/Polyvinyl Alcohol/Montmorillonite Clay (CS/PVA/MMT) scaffold by adopting an electrospinning method, and their biocompatibility was evaluated in vitro with L929 fibroblast cell line to ascertain its use in wound healing applications. The fabricated scaffold was characterized using analytical techniques. FT-IR measurement exhibited the existence of relevant functional groups and XRD implies scaffolds' amorphous nature. The scaffold's morphology and pore diameter were assessed using TEM and SEM. The pore diameter of the as-prepared scaffold was approximately 125 nm. The antimicrobial assay of the scaffold was evaluated against selected pathogens which demonstrated higher antimicrobial efficacy. The scavenging activity tested using the DPPH assay showed remarkable scavenging capability. The wound healing properties were tested through the Cytotoxicity assay conducted on the L929 assay which proved the scaffold to be a suitable material for cell proliferation. Also, a Molecular docking investigation was carried out for CS/PVA/MMT ligand using human neutrophil elastase (HNE) 1H1B protein as a receptor in the CB-Dock server. Studies conducted in silico revealed strong interaction and high binding energy ratings of CS/PVA/MMT ligand with key residues of human neutrophil elastase (HNE) 1H1B proteins that help in tissue regeneration activity.

Polycaprolactone-Based Composite Electrospun Nanofibers as Hybrid Biomaterial Systems Containing Hydroxyl- or Carboxylic Acid-Functionalized Multiwall Carbon Nanotubes

Composite electrospun nanofibers based on polycaprolactone (PCL) have shown promise in various biomedical applications due to their unique properties. This study investigates the effects of incorporating hydroxyl (–OH)- or carboxylic acid (–COOH)-functionalized multiwall carbon nanotubes (MWCNTs) into PCL matrices. Two types of functionalized additives, MWCNT-OH and MWCNT-COOH, were used at different concentrations (0.06 and 0.12 wt%). Various characterization techniques including FTIR, XRD, AFM, SEM, water contact angle analysis, and tensile strength testing were employed to evaluate changes in nanofiber morphology, crystallinity, surface topography, wettability, and mechanical properties. In addition, in vitro cytotoxicity assays were conducted using HUVECs and L929 fibroblasts over 1-, 3-, and 5-day intervals. This study represents a novel examination of (–OH)- and (–COOH)-functionalized MWCNTs as additives in electrospun PCL biopolymer matrices. The findings indicate that incorporating small amounts of (–OH)- or (–COOH)-functionalized MWCNTs enhances the physicochemical characteristics of PCL nanofibers, making them more suitable for biomedical applications. While both types of functionalized MWCNT additives improved properties compared to pure PCL nanofibers, (–COOH)-functionalized MWCNT-incorporated nanofibers exhibited the most favorable features. In conclusion, this research highlights the potential of tailored PCL-based composite nanofibers containing functionalized MWCNTs as advanced biomaterial systems for biomedical applications, contributing to the development of innovative biomaterials for diverse biomedical contexts.