L-band Synthetic Aperture Radar Research Articles

Groundwater potential zone demarcation in the Khadir Island of Kachchh, Western India

In the present work, remote sensing, Geographic Information System (GIS), field investigation, and mapping methods/techniques were incorporated to demarcate the groundwater potential zones in the Khadir Island of the Kachchh region. Preliminary work consists of reconnaissance surveys and the preparation of various thematic maps of the region. The lithology (Khadir formation of Mesozoic period), slope, soil, land use and land cover (LULC), lineament density (Faults, fractures and linear valleys), drainage density, and geomorphology thematic maps were prepared using Advanced Land Observation Satellite - Phased Array Type L-band Synthetic Aperture Radar (ALOS PALSAR) data with 12.5 m spatial resolution, Sentinel-2 data (bands 8, 4, and 3), and ICAR- National Bureau of Soil Survey and Land Use Planning and Geological Survey of India (GSI) published maps. The Groundwater Potential Index (GWPI) was determined by integrating and computing the groundwater thematic maps. The groundwater potential map was further validated using the Cohen's Kappa statistic method. The GWPI determines a high groundwater potential zone in the study area, of which about 12.24% and 19.41% of the area are excellent and very good potential zones for groundwater extraction, respectively. The study shows that the Cohen's Kappa coefficient of 0.767, which falls under the “Good Strength of Agreement” validates the result and determines that the Western and Eastern parts of the study area have greater groundwater potential zones.

Multi-Source Mapping of Forest Susceptibility to Spruce Budworm Defoliation Based on Stand Age and Composition across a Complex Landscape in Maine, USA

Spruce budworm (Choristoneura fumiferana; SBW) outbreaks in the northeastern USA and Canada are recurring phenomena leading to large-scale mortality of spruce (Picea sp.) and balsam fir (Abies balsamea (L.) Mill.) forests as susceptibility to SBW is primarily determined by the availability of host species and their maturity. Our study examined several satellite remote sensing (Sentinel-1 C-band synthetic aperture radar (SAR), PALSAR L-band SAR, and Sentinel-2 multispectral) and site variables over space and time to develop a method to produce large-scale SBW stand impact types and susceptibility maps in Maine, USA. We used two machine-learning algorithms (Random Forest, RF; Multi-Layer Perceptron, MLP) to map SBW host species where RF produced better results than MLP. Our best model with site (elevation and aspect) and Sentinel-2 data attained an overall accuracy (OA) of 83.4%. However, the addition of SAR variables did not improve the model further. Combining host species data with age data retrieved from Land Change Monitoring, Assessment, and Projection (LCMAP) products, we demonstrated that SBW susceptibility map (based on stand impact types) could be produced with an OA of 88.3%. The fine spatial resolution (20 m) maps derived from our study provide reliable products for landscape-level SBW interventions in the region.

Combination of Hyperspectral and Quad-Polarization SAR Images to Classify Marsh Vegetation Using Stacking Ensemble Learning Algorithm

Combinations of multi-sensor remote sensing images and machine learning have attracted much attention in recent years due to the spectral similarity of wetland plant canopy. However, the integration of hyperspectral and quad-polarization synthetic aperture radar (SAR) images for classifying marsh vegetation has still been faced with the challenges of using machine learning algorithms. To resolve this issue, this study proposed an approach to classifying marsh vegetation in the Honghe National Nature Reserve, northeast China, by combining backscattering coefficient and polarimetric decomposition parameters of C-band and L-band quad-polarization SAR data with hyperspectral images. We further developed an ensemble learning model by stacking Random Forest (RF), CatBoost and XGBoost algorithms for marsh vegetation mapping and evaluated its classification performance of marsh vegetation between combinations of hyperspectral and full-polarization SAR data and any of the lone sensor images. Finally, this paper explored the effect of different polarimetric decomposition methods and wavelengths of radar on classifying wetland vegetation. We found that a combination of ZH-1 hyperspectral images, C-band GF-3, and L-band ALOS-2 quad-polarization SAR images achieved the highest overall classification accuracy (93.13%), which was 5.58–9.01% higher than that only using C-band or L-band quad-polarization SAR images. This study confirmed that stacking ensemble learning provided better performance than a single machine learning model using multi-source images in most of the classification schemes, with the overall accuracy ranging from 77.02% to 92.27%. The CatBoost algorithm was capable of identifying forests and deep-water marsh vegetation. We further found that L-band ALOS-2 SAR images achieved higher classification accuracy when compared to C-band GF-3 polarimetric SAR data. ALOS-2 was more sensitive to deep-water marsh vegetation classification, while GF-3 was more sensitive to shallow-water marsh vegetation mapping. Finally, scattering model-based decomposition provided important polarimetric parameters from ALOS-2 SAR images for marsh vegetation classification, while eigenvector/eigenvalue-based and two-component decompositions produced a great contribution when using GF-3 SAR images.

Factors Controlling a Synthetic Aperture Radar (SAR) Derived Root-Zone Soil Moisture Product over The Seward Peninsula of Alaska

Root-zone soil moisture exerts a fundamental control on vegetation, energy balance, and the carbon cycle in Arctic ecosystems, but it is still not well understood in vast, remote, and understudied regions of discontinuous permafrost. The root-zone soil moisture product (30 m resolution) used in this analysis was retrieved from a time-series P-Band (420–440 MHz) synthetic aperture radar (SAR) backscatter observations (August 2017 & October 2017). While similar approaches have been taken to retrieve surface (0 cm to 5 cm) soil moisture from L-Band (1.2 GHz) SAR backscatter, this is one of the first known attempts at reaching the root-zone in permafrost regions. Here, we analyze secondary factors (excluding primary factors, such as precipitation) controlling summer (August) soil moisture at depths of 6 cm, 12 cm, and 20 cm over a 4500 km2 area on the Seward Peninsula of Alaska. Using a random forest model, we quantify the impact of topography, vegetation, and meteorological factors on soil moisture distributions. In developing the random forest model, we explore a variety of feature scales (30 m, 60 m, 90 m, 120 m, 180 m, and 240 m), tune hyperparameters (the structure of individual decision trees making up the ensemble including the number and depth of trees), and perform the final feature selection using cross-validated recursive feature elimination. Results suggest that root-zone soil moisture on the Seward Peninsula is primarily controlled by vegetation at 6 cm, but deeper in the soil column topography and meteorological factors, such as predominant winter wind direction and summer insolation, play a larger role. The random forest model accounts for 40% to 60% of the variation observed (R2 = 0.44 at 6 cm, R2 = 0.52 at 12 cm, R2 = 0.58 at 20 cm). These results indicate that vegetation is the dominant control on soil moisture shallow in the soil column, but the impact of vegetation does not extend to deeper layers retrieved from P-Band SAR backscatter.

Aboveground biomass mapping by integrating ICESat-2, SENTINEL-1, SENTINEL-2, ALOS2/PALSAR2, and topographic information in Mediterranean forests

ABSTRACT The Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) provides an extraordinary opportunity to support global large-scale forest carbon mapping, but further research is needed in order to obtain wall-to-wall forest aboveground biomass (AGB) maps with this technology. The effects of vegetation structure on the performance of canopy height and AGB modeling using ICESat-2 photon-counting light detection and ranging (LiDAR) data in Mediterranean forest areas have not been previously studied in the literature. In this study, we combined recent ICESat-2 vegetation (ATL08) data, Airborne Laser Scanning (ALS)- and field-based estimates, and a multi-sensor earth observation composite for extrapolation of AGB estimates and AGB mapping. A diverse gradient of forest Mediterranean ecosystems, distributed over 19,744.15 km2 of forest area in the region of Extremadura (Spain), with different species and structural complexity forming 5 different forest types (3 Quercus spp. dominated and 2 Pinus spp. dominated forests), was used to (i) evaluate the precision of ICESat-2 canopy height estimations, (ii) develop ICESat-2-based AGB models, and (iii) generate a spatially continuous prediction of AGB by using data from the satellite missions Sentinel-1 (S1), Sentinel-2 (S2), Phased Array L-band Synthetic Aperture Radar (ALOS2/PALSAR2), and Shuttle Radar Topography Mission (SRTM). First, ALS- and ICESat-2-derived metrics that best described canopy height (p98 and rh98, respectively) were compared at the ATL08 segment level. Second, ALS-based AGB values were derived at the ATL08 segment scale. Third, ALS-based AGB estimates at the ICESat-2 segment level were used as dependent variables to fit ICESat-2-based AGB models. Fourth, a multi-sensor approach was then implemented to predict ICESat-2-derived AGB, by means of a Random Forest (RF) modeling technique, with predictors retrieved from S1, S2, ALOS2/PALSAR2, and SRTM. Finally, RF was used to generate wall-to-wall AGB maps that were compared with field-, ALS- and ICESat-2-based observations. The agreement between the ALS- and ICESat-2-derived metrics related to the canopy height distribution was higher for Pinus spp. forest than for the Quercus spp-dominated forests. The ICESat-2-based AGB models yielded model efficiency (Mef) values between 0.56 and 0.80, with a RMSE ranging from 7.76 to 17.71 Mg ha−1 and rRMSE from 19.04 to 55.21%. The multi-sensor RF models provided the following results when compared with the ICESat-2- and ALS-based AGB observations: R 2 values of 0.63 and 0.64, and RMSE values of 11.10 Mg ha−1(rRMSE = 28.15%) and 12.28 Mg ha−1 (rRMSE = 31.45%), respectively, and an approximately unbiased result (0.03 Mg ha−1 and 0.09 Mg ha−1). When applied to the field-based validation data set (4th Spanish National Forest Inventory (SNFI-4) plots = 508), the RF-derived AGB model showed a relatively lower predictive capacity (R 2 = 0.45), a higher RMSE value (25.88 Mg ha−1) and slightly biased results (−1.47 Mg ha−1), especially for larger field-derived AGB intervals. The results of this study serve to provide an initial quantitative assessment of the ICESat-2 ATL08 data for large-scale AGB estimation. The findings suggest that a multi-sensor approach may be feasible for extrapolating ICESat-2-derived AGB estimates over areas where field or ALS reference data are not available.

Gap Filling Cloudy Sentinel-2 NDVI and NDWI Pixels with Multi-Frequency Denoised C-Band and L-Band Synthetic Aperture Radar (SAR), Texture, and Shallow Learning Techniques

Multispectral imagery provides unprecedented information on Earth system processes: however, data gaps due to clouds and shadows are a major limitation. Normalized-Difference Vegetation Index (NDVI) and Normalized-Difference Water Index (NDWI) are two spectral indexes employed for monitoring vegetation phenology, land-cover change and more. Synthetic Aperture Radar (SAR) with its cloud-penetrating abilities can fill data gaps using coincident imagery. In this study, we evaluated C-band Sentinel-1, L-band Uninhabited Aerial Vehicle SAR (UAVSAR) and texture for gap filling using efficient machine learning regression algorithms across three seasons. Multiple models were evaluated including Support Vector Machine, Random Forest, Gradient Boosted Trees and an ensemble of models. The Gap filling ability of SAR was evaluated with Sentinel-2 imagery from the same date, 3 days and 8 days later than both SAR sensors in September. Sentinel-1 and Sentinel-2 imagery from winter and spring seasons were also evaluated. Because SAR imagery contains noise, we compared two robust de-noising methods and evaluated performance against a refined lee speckle filter. Mean Absolute Error (MAE) rates of the cloud gap-filling model were assessed across different dataset combinations and land covers. The results indicated de-noised Sentinel-1 SAR and UAVSAR with GLCM texture provided the highest predictive abilities with random forest R2 = 0.91 (±0.014), MAE = 0.078 (±0.003) (NDWI) and R2 = 0.868 (±0.015), MAE = 0.094 (±0.003) (NDVI) during September. The highest errors were observed across bare ground and forest, while the lowest errors were on herbaceous and woody wetland. Results on January and June imagery without UAVSAR were less strong at R2 = 0.60 (±0.036), MAE = 0.211 (±0.005) (NDVI), R2 = 0.61 (±0.043), MAE = 0.209 (±0.005) (NDWI) for January and R2 = 0.72 (±0.018), MAE = 0.142 (±0.004) (NDVI), R2 = 0.77 (±0.022), MAE = 0.125 (±0.004) (NDWI) for June. Ultimately, the results suggest de-noised C-band SAR with texture metrics can accurately predict NDVI and NDWI for gap-filling clouds during most seasons. These shallow machine learning models are rapidly trained and applied faster than intensive deep learning or time series methods.

A novel method using explainable artificial intelligence (XAI)-based Shapley Additive Explanations for spatial landslide prediction using Time-Series SAR dataset

As artificial intelligence (AI) techniques are becoming more popular in landslide modeling, it is important to understand how decisions are made. Fairness, and transparency becomes ever more vital due to ethical concerns and trust. Despite the popularity of machine learning (ML) algorithms in landslide modeling, the explainability of these methods are often considered as black box. This paper aims to propose an explainable artificial intelligence (XAI) for landslide prediction using synthetic-aperture radar (SAR) time-series data, NDVI (normalized difference vegetation index) time-series data and other geo-environmental factors such as DEM (digital elevation model) derivatives. We employed a Shapley Additive Explanations (SHAP) approach to understand how and what decisions ML-based models are making. 37 features were extracted from various sources such as ALOS-PALSAR (ALOS Phased Array type l-band Synthetic Aperture Radar), ALOS-2 (SAR), Landsat-8, topographic maps, and DEM for landslide susceptibility mapping in a landslide prone area in Chukha, Bhutan as a test site. The result was then compared using two standard ML methods: random forest (RF) and support vector machine (SVM). As per results, the RF model outperformed (0.914) the SVM. Moreover, the higher reliability of the RF model was proved by the area under the curve (AUC) of 0.941. XAI results revealed, features like altitude, aspect, NDVI-2014, NDVI-2017, and NDVI-2018 were the most effective features for landslide prediction by both models. Interestingly, among those features, NDVI-2014, aspect, and NDVI-2017 negatively correlated with the landslide prediction; whereas positively correlated when SVM was utilized. This interpretation ability indicates the advantages of XAI over the conventional methods as it measures the impact, interaction and correlation of conditioning factors within a model. The current research finding can provide more transparency and explainability when working with MLs in landslide studies. This could help to build trust among the geoscientists and decision-makers while making geohazard prediction.

Terrain effect analysis and compensation method for polarimetric synthetic aperture radar interferometry height parameter inversion

In this paper, the terrain effect on parameter inversion performance of polarimetric synthetic aperture radar (PolSAR) and polarimetric SAR interferometry (PolInSAR) are analysed first. Based on the analysis of the terrain effect on single pixel processing, the terrain effect between adjacent pixels is addressed for both PolSAR and PolInSAR image pairs. Through the analysis, the terrain effect should be considered not only for the single pixel data calibration but also for the adjacent pixels of PolSAR and PolInSAR parameter inversion processing. Therefore, combining with the geometric model correction of sloped-random volume over ground, the terrain-compensated procedure is proposed for PolInSAR parameter inversion. The parameter inversion performance is improved effectively with terrain effect consideration. The effectiveness of the proposed method is investigated by the PolSARPro simulated dataset and the real Phased Array L-Band Synthetic aperture Radar (PALSAR) dataset.

ANN-Based DEM Fusion and DEM Improvement Frameworks in Regions of Assam and Meghalaya using Remote Sensing Datasets

The Digital Elevation Models (DEMs) are a key and primary input to a large number of modelling processes such as disaster risk monitoring, flood modelling, hydrology, geology, geomorphology, climatology, and environmental study applications. The DEM serves as an important source of topographic information representing the continuous surface of the earth in 3 dimensions with x, y and z coordinates of any point in a grided raster form or a vector TIN form. This study is based on developing a new method using the universal approximation capability of neural networks for the fusion and improvement of L-band and X-band SAR (Synthetic Aperture Radar) DEMs in the complex terrain of Assam and Meghalaya states of the Indian geographic region using the DEM fusion technique. The high-spatial-resolution ALOS PALSAR RTC HR 12.5 m DEM products are used in a fusion framework designed with neural network models. The network adaptively learns the terrain information to produce fused DEM products. The neural network models generate the relationship between the input elevation information from ALOS PALSAR DEMs and precise reference elevation from ICESat-2 spaceborne altimetry as target data. The training and testing data samples are prepared and filtered by checking the correct range of elevation from the toposheets of this region. Different models are used to separately train for the relatively plain valley portion of the Assam region and mountainous portions of the highland Shillong plateau. The obtained fused DEMs from the developed neural net structure are assessed for their quality and accuracy by estimating the RMSE parameter. The fused DEM attains an RMSE value of 7 meters for the complete region which is a significant improvement over the input DEM RMSE of approximately 11 meters. The plain area points and mountainous region points are assessed separately to analyze the predictions from neural nets in the two types of terrains observed in this study site. Moreover, TanDEM-X 90 m DEM is improved using the neural network modeling in the geometric distortions affected areas, which shows an improvement of around 33% overall at the study site. The assessment of plain and mountainous region points for near-ground points shows an improvement of 47% and 55% respectively. The fusion framework designed using the neural network models is an effective and efficient method for obtaining fused DEMs as well as for the improvement of the existing DEMs for complex terrain.

Global Mangrove Extent Change 1996–2020: Global Mangrove Watch Version 3.0

Mangroves are a globally important ecosystem that provides a wide range of ecosystem system services, such as carbon capture and storage, coastal protection and fisheries enhancement. Mangroves have significantly reduced in global extent over the last 50 years, primarily as a result of deforestation caused by the expansion of agriculture and aquaculture in coastal environments. However, a limited number of studies have attempted to estimate changes in global mangrove extent, particularly into the 1990s, despite much of the loss in mangrove extent occurring pre-2000. This study has used L-band Synthetic Aperture Radar (SAR) global mosaic datasets from the Japan Aerospace Exploration Agency (JAXA) for 11 epochs from 1996 to 2020 to develop a long-term time-series of global mangrove extent and change. The study used a map-to-image approach to change detection where the baseline map (GMW v2.5) was updated using thresholding and a contextual mangrove change mask. This approach was applied between all image-date pairs producing 10 maps for each epoch, which were summarised to produce the global mangrove time-series. The resulting mangrove extent maps had an estimated accuracy of 87.4% (95th conf. int.: 86.2–88.6%), although the accuracies of the individual gain and loss change classes were lower at 58.1% (52.4–63.9%) and 60.6% (56.1–64.8%), respectively. Sources of error included misregistration in the SAR mosaic datasets, which could only be partially corrected for, but also confusion in fragmented areas of mangroves, such as around aquaculture ponds. Overall, 152,604 km2 (133,996–176,910) of mangroves were identified for 1996, with this decreasing by −5245 km2 (−13,587–1444) resulting in a total extent of 147,359 km2 (127,925–168,895) in 2020, and representing an estimated loss of 3.4% over the 24-year time period. The Global Mangrove Watch Version 3.0 represents the most comprehensive record of global mangrove change achieved to date and is expected to support a wide range of activities, including the ongoing monitoring of the global coastal environment, defining and assessments of progress toward conservation targets, protected area planning and risk assessments of mangrove ecosystems worldwide.

A COMPARATIVE ANALYSIS OF PIXEL-BASED AND OBJECT-BASED APPROACHES FOR FOREST ABOVE-GROUND BIOMASS ESTIMATION USING RANDOM FOREST MODEL

Abstract. Providing an accurate above-ground biomass (AGB) map is of paramount importance for carbon stock and climate change monitoring. The main objective of this study is to compare the performance of pixel-based and object-based approaches for AGB estimation of temperate forests in north-eastern of New York State. Second, the capabilities of optical, SAR, and optical + SAR data were investigated. To achieve the goals, the random forest (RF) regression algorithm was used to model and predict the AGB values. Optical (i.e. Landsat 5TM, Landsat 8 OLI, and Sentinel-2), synthetic aperture radar (SAR) (Sentinel-1 and global phased array type L-band SAR (PALSAR/PALSAR-2)), and their integration have been used to estimate the AGB. It is worth mentioning that the airborne light detection and ranging (LiDAR) AGB raster has been used as a reference data for training/testing purposes. The results demonstrate that the OBIA approach enhanced the RMSE of AGB estimation about 5.32 Mg/ha, 8.9 Mg/ha, and 5.29 Mg/ha for optical, SAR, and optical + SAR data, respectively. Moreover, optical + SAR data with the RMSE of 42.63 Mg/ha and R2 of 0.72 for pixel-based and RMSE of 37.31 Mg/ha and R2 of 0.77 for object-based approach provided the best results.

Assessment of radarsat-1, ALOS PALSAR and sentinel-1 SAR satellite images for geological lineament mapping

Lineament mapping is a very important step in geological studies and mineral exploration, with the evolution of remote sensing, processing methods as well as the availability of several optical and radar satellite data, lineaments can be detected without using traditional methods. The objective of this work is to recommend the most suitable data for lineaments to be used in the field of geological science, by comparing the performance of three different RADAR data, namely ALOS PALSAR (The Advanced Land Observing Satellite Phased Array type L-band Synthetic Aperture Radar), Radarsat-1 and Sentinel-1 for automatic lineament extraction using a combination of edge detection and line linking algorithms. The methodology consists to link between the length, number, orientation and density of lineaments with surface characteristics such as the slope, faults, lithology, discontinuities and mineral veins. The results obtained show that the extracted lineaments from Sentinel-1 VH polarization have a better correlation with geological units, tectonic system direction, as well as shading and slope maps, which is due to the effectiveness of VH polarization, which is independent of soil properties compared to the other polarizations that have shown an overestimation of the lineaments.

Optimizing Image Scale and Resolution to Obtain Lineament Related Structures using ALOS PALSAR Dual Orbit Data

Geological structures identification using conventional optical remote sensing encountered some problems due to atmospheric and surface conditions. Therefore, we exploited the Synthetic Aperture Radar (SAR) in Ascending and Descending orbits to characterize lineaments related to geological structures. We have analyzed two images from the Phased Array type L-band Synthetic Aperture Radar (PALSAR) onboard the Advanced Land Observing Satellite (ALOS). The adjustment of their resolution in the multilooking process was applied to obtain the best understanding between detected lineament and reference fault. The cross-polarized data of ALOS PALSAR level SLC were multilooked with variation of resolution from 15 to 120 m. Obtaining the optimum detected lineament-related faults, which applied the Yamaguchi criterion to extract the lineament visually in the multilooked images. The Kamojang-Guntur Geothermal Fields in West Java were selected as a study area because there is a challenge to confirm geological structure in the area with high alteration and high weathering conditions. According to the proposed criterion, we have obtained those images with resolution of 75 to 90 from the analysis images can represent surface geological structure conditions, and the correlation with existing published geological map. The field verifications have been confirmed that the geological structure indication from images has been proved with the existence of slickenside and morphological conditions such as drainage of rivers, ridges, and valleys. Based on lineaments, stress regimes, and field verifications, it was concluded that Yamaguchi criterion analysis with image resolution 75 to 90 m can describe the presence of regional structures and interpreted structures.

Fusion of Remote Sensing Data Using GIS-Based AHP-Weighted Overlay Techniques for Groundwater Sustainability in Arid Regions

Remote sensing and GIS approaches have provided valuable information on modeling water resources, particularly in arid regions. The Sahara of North Africa, which is one of the driest regions on Earth, experienced several pluvial conditions in the past that could have stored significant amounts of groundwater. Thus, harvesting the stored water by revealing the groundwater prospective zones (GWPZs) is highly important to water security and the management of water resources which are necessary for sustainable development in such regions. The Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM), Advanced Land Observing Satellite (ALOS)/Phased Array type L-band Synthetic Aperture Radar (PALSAR), Tropical Rainfall Measuring Mission (TRMM), and Landsat-8 OLI data have all successfully revealed the geologic, geomorphic, climatic, and hydrologic features of Wadi El-Tarfa east of Egypt’s Nile River. The fusion of eleven predictive GIS maps including lithology, radar intensity, lineament density, altitude, slope, depressions, curvature, topographic wetness index (TWI), drainage density, runoff, and rainfall data, after being ranked and normalized through the GIS-based analytic hierarchy process (AHP) and weighted overlay methods, allowed the GWPZs to be demarcated. The resulting GWPZs map was divided into five classes: very high, high, moderate, low, and very low potentiality, which cover about 10.32, 24.98, 30.47, 24.02, and 10.20% of the entire basin area, respectively. Landsat-8 and its derived NDVI that was acquired on 15 March 2014, after the storm of 8–9 March 2014, along with existing well locations validated the GWPZs map. The overall results showed that an integrated approach of multi-criteria through a GIS-based AHP has the capability of modeling groundwater resources in arid regions. Additionally, probing areas of GWPZs is helpful to planners and decision-makers dealing with the development of arid regions.

ALOS-2 L-band SAR backscatter data improves the estimation and temporal transferability of wildfire effects on soil properties under different post-fire vegetation responses

Remote sensing techniques are of particular interest for monitoring wildfire effects on soil properties, which may be highly context-dependent in large and heterogeneous burned landscapes. Despite the physical sense of synthetic aperture radar (SAR) backscatter data for characterizing soil spatial variability in burned areas, this approach remains completely unexplored. This study aimed to evaluate the performance of SAR backscatter data in C-band (Sentinel-1) and L-band (ALOS-2) for monitoring fire effects on soil organic carbon and nutrients (total nitrogen and available phosphorous) at short term in a heterogeneous Mediterranean landscape mosaic made of shrublands and forests that was affected by a large wildfire. The ability of SAR backscatter coefficients and several band transformations of both sensors for retrieving soil properties measured in the field in immediate post-fire situation (one month after fire) was tested through a model averaging approach. The temporal transferability of SAR-based models from one month to one year after wildfire was also evaluated, which allowed to assess short-term changes in soil properties at large scale as a function of pre-fire plant community type. The retrieval of soil properties in immediate post-fire conditions featured a higher overall fit and predictive capacity from ALOS-2 L-band SAR backscatter data than from Sentinel-1 C-band SAR data, with the absence of noticeable under and overestimation effects. The transferability of the ALOS-2 based model to one year after wildfire exhibited similar performance to that of the model calibration scenario (immediate post-fire conditions). Soil organic carbon and available phosphorous content was significantly higher one year after wildfire than immediately after the fire disturbance. Conversely, the short-term change in soil total nitrogen was ecosystem-dependent. Our results support the applicability of L-band SAR backscatter data for monitoring short-term variability of fire effects on soil properties, reducing data gathering costs within large and heterogeneous burned landscapes.

A Registration Method for Dual-Frequency, High-Spatial-Resolution SAR Images

With the continuous development of synthetic-aperture-radar (SAR) technology, SAR-image data are becoming increasingly abundant. For the same scene, dual-frequency (high-frequency and low-frequency) SAR images can present different details and feature information. Image fusion of the two frequencies can combine the advantages of both, thus describing targets more comprehensively. Image registration is the key step of image fusion and determines the quality of fusion. Due to the complex geometric distortion and gray variance between dual-frequency SAR images with high resolution, it is difficult to realize accurate registration between the two. In order to solve this problem, this paper proposes a method to achieve accurate registration by combining edge features and gray information. Firstly, this paper applies the edge features of images and a registration algorithm based on fast Fourier transform (FFT) to realize rapid coarse registration. Then, combining a registration algorithm based on the enhanced correlation coefficient (ECC) with the concept of segmentation, the coarse-registration result is registered to achieve accurate registration. Finally, by processing the airborne L-band and Ku-band SAR data, the correctness, effectiveness, and practicability of the proposed method are verified, with a root mean square error (RMSE) of less than 2.

Green Area Index and Soil Moisture Retrieval in Maize Fields Using Multi-Polarized C- and L-Band SAR Data and the Water Cloud Model

The green area index (GAI) and the soil moisture under the canopy are two key variables for agricultural monitoring. The current most accurate GAI estimation methods exploit optical data and are rendered ineffective in the case of frequent cloud cover. Synthetic aperture radar (SAR) measurements could allow the remote estimation of both variables at the parcel level, on a large scale and regardless of clouds. In this study, several methods were implemented and tested for the simultaneous estimation of both variables using the water cloud model (WCM) and dual-polarized radar backscatter measurements. The methods were tested on the BELSAR-Campaign data set consisting of in-situ measurements of bio-geophysical variables of vegetation and soil in maize fields combined with multi-polarized C- and L-band SAR data from Sentinel-1 and BELSAR. Accurate GAI estimates were obtained using a random forest regressor for the inversion of a pair of WCMs calibrated using cross and vertical co-polarized SAR data in L- and C-band, with correlation coefficients of 0.79 and 0.65 and RMSEs of 0.77 m2 m−2 and 0.98 m2 m−2, respectively, between estimates and in-situ measurements. The WCM, however, proved inadequate for soil moisture monitoring in the conditions of the campaign. These promising results indicate that GAI retrieval in maize crops using only dual-polarized radar data could successfully substitute for estimates derived from optical data.

EVALUATING PIXEL-BASED AND OBJECT-BASED APPROACHES FOR FOREST ABOVE-GROUND BIOMASS ESTIMATION USING A COMBINATION OF OPTICAL, SAR, AND AN EXTREME GRADIENT BOOSTING MODEL

Abstract. The above-ground biomass (AGB) estimation monitoring provides a powerful tool for the assessment of carbon emission and sequestration. Using remote sensing technique is an environmentally friendly way of biomass estimation. Thus, this paper investigated optical (i.e. Landsat 8 OLI and Sentinel-2), synthetic aperture radar (SAR) (global phased array type L-band SAR (PALSAR/PALSAR-2) and Sentinel-1), and their integration for AGB estimation of the Pack demonstration forest in Warrensburg, NY. Importantly, a LiDAR AGB raster of the study area was used as reference data for training/testing purposes. Then, an extreme gradient boosting (Xgboost) machine learning model was used to predict biomass values. The major goal of this study was to compare the performance of pixel-based and object-based image analysis (OBIA) for the AGB estimation. Results indicated that the object-based approach improved the RMSE of AGB prediction about 6.28 Mg/ha for optical + SAR, 6.17 Mg/ha for SAR, and 5.6 Mg/ha for optical data in comparison to the pixel-based approach. Moreover, the combination of optical and SAR data increased the prediction accuracy regardless of feature extraction approach.

Comparative Analysis of the Sensitivity of SAR Data in C and L Bands for the Detection of Irrigation Events

Comprehensive knowledge about irrigation timing is crucial for water resource management. This paper presents a comparative analysis between C- and L-band Synthetic Aperture Radar (SAR) data for the detection of irrigation events. The analysis was performed using C-band time series data derived from the Sentinel-1 (S1) satellite and two L-band images from the PALSAR-2 (ALOS-2) sensor acquired over irrigated grassland plots in the Crau plain of southeast France. The S1 C-band time series was first analyzed as a function of rainfall and irrigation events. The backscattering coefficients in both the L and C bands were then compared to the time difference between the date of the acquired SAR image and the date of the last irrigation event occurring before the SAR acquisition (Δt). Sensitivity analysis was performed for 2 classes of the Normalized Difference Vegetation Index (NDVI ≤0.7 and NDVI >0.7). The main results showed that when the vegetation is moderately developed (NDVI ≤0.7), the C-band temporal variation remains sensitive to the soil moisture dynamics and the irrigation events could be detected. The C-VV signal decreases due to the drying out of the soil when the time difference between the S1 image and irrigation event increases. For well-developed vegetation cover (NDVI >0.7), the C-band sensitivity to irrigation events becomes dependent on the crop type. For well-developed Gramineae grass with longs stalks and seedheads, the C band shows no correlation with Δt due to the absence of the soil contribution in the backscattered signal, contrary to the legume grass type, where the C band shows a good correspondence between C-VV and Δt for NDVI > 0.7. In contrast, analysis of the L-band backscattering coefficient shows that the L band remains sensitive to the soil moisture regardless of the vegetation cover development and the vegetation characteristics, thus being more suitable for irrigation detection than the C band. The L-HH signal over Gramineae grass or legume grass types shows the same decreasing pattern with the increase in Δt, regardless of the NDVI-values, presenting a decrease in soil moisture with time and thus high sensitivity of the radar signal to soil parameters. Finally, the co-polarizations for both the C and L bands (L-HH and C-VV) tend to be more adequate for irrigation detection than the HV cross-polarization, as they show higher sensitivity to soil moisture values.

A study of the serious conflicts between oil palm expansion and biodiversity conservation using high-resolution remote sensing

ABSTRACT Sustainable oil palm production is a key issue in global biodiversity conservation and sustainable development. As one of the world’s major vegetable oil crops, oil palm has expanded exponentially to meet increased demand over the past decades. However, previous monitoring and assessments of oil palm plantations were hampered because of the lack of high-resolution annual maps at the global scale. We produced annual oil palm plantation maps in 4 major producer countries (Indonesia, Malaysia, Thailand and Papua New Guinea) in Asia-Pacific from 2007 to 2018 at 100-m resolution using advanced remote sensing techniques with Phased Array L-band Synthetic Aperture Radar (PALSAR) and Moderate Resolution Imaging Spectroradiometer (MODIS) data. We uncover the global patterns of oil palm expansion and find that global oil palm expansion has a very high degree of potential conflict with local biodiversity. Globally, 99.9% of oil palm plantations overlapped with Conservation Priority Zones (CPZs) and oil palm plantations encroached on 231 protected areas. We suggest to incorporate the related issues into the Post-2020 Global Biodiversity Framework.