Kinetics Of Oxidation Reaction Research Articles

Boosting borohydride oxidation kinetics by manipulating hydrogen evolution and oxidation through octahedral Pt–Ni/C for high-performance direct borohydride fuel cells

Direct borohydride fuel cells (DBFCs) outperform the other direct liquid fuel cells by a higher open circuit voltage and energy density. However, their benign performance and efficiency are highly dependent on high-performance anode catalysts. This study delves into the enhancement of borohydride oxidation reaction (BOR) kinetics through an octahedral Pt–Ni/C catalyst. The Pt(111) facets of the catalyst exhibit a combination of abundant active sites exposed for BOR and the inherent ability to suppress hydrolysis reaction. Furthermore, the synergistic incorporation of Ni modifies the electronic structure of Pt, resulting in enhanced OH− adsorption and hydrogen oxidation reaction (HOR) activity. This multifaceted approach not only mitigates hydrogen accumulation but also boosts the overall BOR efficiency. The elaborate electrochemical measurements along with comprehensive characterizations elucidate the superior catalytic activity and stability of Pt–Ni/C over commercial Pt/C catalysts. Specifically, DBFCs employing the Pt–Ni/C catalyst manifest considerably higher open circuit voltage (1.05 V), peak power density (1.82 W cm−2) and fuel efficiency (63.96 %) than those of DBFCs employing Pt/C catalyst. Through these efforts, we provide significant insight into the design of high-performance anode catalyst for DBFCs.

Industrial-Si-based photoanode for highly efficient and stable water splitting

Photoelectrochemical (PEC) water splitting is an effective and sustainable method for solar energy harvesting. However, the technology is still far away from practical application because of the high cost and low efficiency. Here, we report a low-cost, stable and high-performing industrial-Si-based photoanode (n-Indus-Si/Co-2mA-xs) that is fabricated by simple electrodeposition. Systematic characterizations such as scanning electron microscopy, X-ray photoelectron spectroscopy have been employed to characterize and understand the working mechanisms of this photoanode. The uniform and adherent dispersion of co-catalyst particles result in high built-in electric field, reduced charge transfer resistance, and abundant active sites. The core–shell structure of co-catalyst particles is formed after the activation process. The reconstructed morphology and modified chemical states of the surface co-catalyst particles improve the separation and transfer of charges, and the reaction kinetics for water oxidation greatly. Our work demonstrates that large-scale PEC water splitting can be achieved by engineering the industrial-Si-based photoelectrode, which shall guide the development of solar energy conversion in the industry.

Investigating the kinetics of small alcohol oxidation reactions using platinum supported on a doped niobium suboxide support

Investigating the kinetics of small alcohol oxidation reactions using platinum supported on a doped niobium suboxide support

Graphene Quantum Dots as Hole Extraction and Transfer Layer Empowering Solar Water Splitting of Catalyst-Coupled Zinc Ferrite Nanorods.

Despite the narrow band gap energy, the performance of zinc ferrite (ZnFe2O4) as a photoharvester for solar-driven water splitting is significantly hindered due to its sluggish charge transfer and severe charge recombination. This work reports the fabrication of a hybrid nanostructured hydrogenated ZnFe2O4 (ZFO) photoanode with enhanced photoelectrochemical water-oxidation activity through coupling N-doped graphene quantum dots (GQDs) as a hole transfer layer and Co-Pi as a catalyst. The GQDs not only reduce the surface-mediated nonradiative electron-hole pair recombination but also induce a built-in interfacial electric field leading to a favorable band alignment at the ZFO/GQDs interface, helping rapid photogenerated hole separation and serving as a conducting hole transfer highway, improve the hole transportation into the Co-Pi catalyst for enhanced water oxidation reaction kinetics. The optimized ZFO/GQD/Co-Pi hybrid photoanode delivers a 23-fold photocurrent enhancement at 1.23 V versus the reversible hydrogen electrode (RHE) and a significant 360 mV reduction in the onset potential, reaching 0.65 VRHE compared with the ZFO photoanode under 1 sun illumination in a neutral electrolytic environment. This investigation underscores the mechanism of synergistic interplay between the hole transport layer and cocatalyst in boosting the solar-illuminated water-splitting activity of the ZFO photoanode.

Atomically dispersed Iridium on Mo2C as an efficient and stable alkaline hydrogen oxidation reaction catalyst

Hydroxide exchange membrane fuel cells (HEMFCs) have the advantages of using cost-effective materials, but hindered by the sluggish anodic hydrogen oxidation reaction (HOR) kinetics. Here, we report an atomically dispersed Ir on Mo2C nanoparticles supported on carbon (IrSA-Mo2C/C) as highly active and stable HOR catalysts. The specific exchange current density of IrSA-Mo2C/C is 4.1 mA cm−2ECSA, which is 10 times that of Ir/C. Negligible decay is observed after 30,000-cycle accelerated stability test. Theoretical calculations suggest the high HOR activity is attributed to the unique Mo2C substrate, which makes the Ir sites with optimized H binding and also provides enhanced OH binding sites. By using a low loading (0.05 mgIr cm−2) of IrSA-Mo2C/C as anode, the fabricated HEMFC can deliver a high peak power density of 1.64 W cm−2. This work illustrates that atomically dispersed precious metal on carbides may be a promising strategy for high performance HEMFCs.

Transient simulation of conjugate heat transfer of kerosene with thermal oxidative and surface coking reactions at a supercritical pressure

The regenerative cooling technology in aerospace applications often involves supercritical-pressure heat transfer of a hydrocarbon fuel, in which thermal oxidative reactions of the fuel would lead to surface coke accumulation on the cooling channel wall. In this paper, the long-term transient conjugate heat transfer of kerosene has been numerically investigated in a circular mini tube at a supercritical pressure of 3 MPa. The modified chemical mechanism and kinetics of thermal oxidative and surface coking reactions of kerosene are proposed, which, with an additional surface reaction, are capable of treating large coke deposition in regions with sharp temperature gradients. Transient surface coke accumulation and its effect on heat transfer are handled by a dynamic mesh technique. A series of numerical studies are conducted to elucidate the influences of surface heat flux, dissolved oxygen mass fraction, inlet fuel mass flow rate, and coke layer thermal conductivity on the supercritical-pressure heat transfer and thermal oxidative reactions. The effects of different reaction pathways on surface coke accumulation are analyzed comprehensively, and it is revealed that the oxygen-consuming surface coke deposition is initiated only at the high fuel temperature at around 590 K. The present numerical results would enhance fundamental understanding of the long-term transient heat transfer process of a hydrocarbon fuel at supercritical pressures in the regenerative cooling applications.

Analysis of the Effect of Operating Conditions on the Performance of a Direct Ammonia Fuel Cell Using Multiphysics Modelling

Understanding the physical and chemical basis of device operation is important for their development. While hydrogen fuel cells are a widely studied topic, direct ammonia fuel cells (DAFCs) are a smaller field with fewer studies. Although the theoretical voltage of a DAFC is approximately equal to that of a hydrogen fuel cell, the slow kinetics of the ammonia oxidation reaction hamper cell performance. Therefore, development of anode catalysts is especially needed for practical viability of the DAFCs. To study DAFC operation, specifically interactions between reaction kinetics and different transport phenomena, we developed a one-dimensional model of a DAFC and performed a sensitivity analysis for several parameters related to the cell operating conditions (e.g., temperature, relative humidity) and properties (e.g., catalyst loading). As expected, temperature and relative humidity were very important for cell power. However, while faster reaction kinetics improved the cell performance, simply increasing the catalyst loading did not always produce a comparable enhancement. These and other observations about the relative importance of the operating parameters should help to prioritize and guide future development of and research on DAFCs. Further studies are needed to understand and optimize e.g. humidity management in different scenarios.

Exploring Disposal Efficiency of COD, NH3-N, and Turbidity in Diluted Real Leachate Using Ti/PdO-CoO Electrodes in an Electrooxidation Cell: An Investigation into Oxidation Mechanism and Reaction Kinetics Studies

In this study, Pd and Co metal oxides, electrochemically deposited on a titanium (Ti) substrate, were utilized to remove chemical oxygen demand (COD), NH3-N, and turbidity from diluted Bingöl leachate. The plating bath was prepared with 7 mM palladium chloride (PdCl2) and 1 mM cobalt chloride (CoCl2), along with 1.68 M NH4Cl, and 0.16 M H3BO3. In the electrooxidation (EO) cell, the anode consisted of a Ti/PdO-CoO electrode, while the cathode was a stainless-steel electrode. The Ti/PdO-CoO electrode demonstrated an actual functional life of 96 h, as determined through accelerated life testing. X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy examinations revealed that the surface of the Ti substrate was coated with PdO and CoO. Turbidity, NH3-N, and COD were electrooxidized indirectly due to the high chloride content (718 mg l−1). In the presence of 10 mM NaCl, the highest removal efficiency for NH3-N, COD, and turbidity was 60.5%, 64.9%, and 96.5%, respectively. The removal of COD, NH3-N, and turbidity fit pseudo-second-order (PFO) kinetics (R2 0.97–0.99). For a COD efficiency of 60.5% at 25 mA cm−2, the corresponding energy consumption, unit energy consumption, and electrode cost were 56.25 kWh m−3, 200.89 kWh/kg-COD, and 2.37 ($/kg-COD), respectively.

Tuning electrochemical water activation over NiIr single-atom alloy aerogels for stable electrochemiluminescence

The anodic oxygen evolution reaction is a well-acknowledged side reaction in traditional aqueous electrochemiluminescence (ECL) systems due to the generation and surface aggregation of oxygen at the electrode, which detrimentally impacts the stability and efficiency of ECL emission. However, the effect of reactive oxygen species generated during water oxidation on ECL luminophores has been largely overlooked. Taking the typical luminol emitter as an example, herein, we employed NiIr single-atom alloy aerogels possessing efficient water oxidation activity as a prototype co-reaction accelerator to elucidate the relationship between ECL behavior and water oxidation reaction kinetics for the first time. By regulating the concentration of hydroxide ions in the electrolyte, the electrochemical oxidation processes of both luminol and water are finely tuned. When the concentration of hydroxide ions in electrolyte is low, the kinetics of water oxidation is attenuated, which limits the generation of oxygen, effectively mitigates the influence of oxygen accumulation on the ECL strength, and offers a novel perspective for harnessing side reactions in ECL systems. Finally, a sensitive and stable sensor for antioxidant detection was constructed and applied to the practical sample detection.

Revealing interfacial charge redistribution of homologous Ru-RuS2 heterostructure toward robust hydrogen oxidation reaction

Precisely tailoring the surface electronic structures of electrocatalysts for optimal hydrogen binding energy and hydroxide binding energy is vital to improve the sluggish kinetics of hydrogen oxidation reaction (HOR). Herein, we employ a partial desulfurization strategy to construct a homologous Ru-RuS2 heterostructure anchored on hollow mesoporous carbon nanospheres (Ru-RuS2@C). The disparate work functions of the heterostructure contribute to the spontaneous formation of a unique built-in electric field, accelerating charge transfer and boosting conductivity of electrocatalyst. Consequently, Ru-RuS2@C exhibits robust HOR electrocatalytic activity, achieving an exchange current density and mass activity as high as 3.56 mA cm−2 and 2.13 mA μgRu-1, respectively, exceeding those of state-of-the-art Pt/C and most contemporary Ru-based HOR electrocatalysts. Surprisingly, Ru-RuS2@C can tolerate 1000 ppm of CO that lacks in Pt/C. Comprehensive analysis reveals that the directional electron transfer across Ru-RuS2 heterointerface induces local charge redistribution in interfacial region, which optimizes and balances the adsorption energies of H and OH species, as well as lowers the energy barrier for water formation, thereby promoting the HOR performance.

Modulating the d-Band Center of Palladium via Ethylene Glycol Modification: Accelerating Had Desorption for Enhanced Formate Electrooxidation.

This study addresses the critical challenge in alkaline direct formate fuel cells (DFFCs) of slow formate oxidation reaction (FOR) kinetics as a result of strong hydrogen intermediate (Had) adsorption on Pd catalysts. We developed WO3-supported Pd nanoparticles (EG-Pd/WO3) via an organic reduction method using ethylene glycol (EG), aiming to modulate the d-band center of Pd and alter Had adsorption dynamics. Cyclic voltammetry demonstrated significantly improved Had desorption kinetics in EG-Pd/WO3 catalysts. Density functional theory (DFT) calculations revealed that the presence of EG reduces the d-band center of Pd, leading to weaker Pd-H bonds and enhanced Had desorption during the FOR. This research provides a new approach to optimize catalyst efficiency in DFFCs, highlighting the potential for more effective and sustainable energy solutions through advanced material engineering.

High‐Performance Anion Exchange Membrane Fuel Cells Enabled by Nitrogen Configuration Optimization in Graphene‐Coated Nickel for Enhanced Hydrogen Oxidation

Anion exchange membrane fuel cell (AEMFC) technology is attracting intensive attention, due to its great potential by using non‐precious‐metal catalysts (NPMCs) in the cathode and cheap bipolar plate materials in alkaline media. However, in such case, the kinetics of hydrogen oxidation reaction (HOR) in the anode is two orders of magnitude sluggish than that of acidic electrolytes, which is recognized as the grand challenge in this field. Herein, we report the rationally designed Ni nanoparticles encapsulated by N‐doped graphene layers (Ni@NG) using a facile pyrolysis strategy. Based on the density functional theory calculations and electrochemical performance analysis, it is witnessed that the rich Pyridinic‐N within the graphene shell optimizes the binding energy of the intermediates, thus enabling the fundamentally enhanced activity for HOR with robust stability. As a proof of concept, the resultant Ni@NG sample as the anode with a low loading (1.8 mg cm−2) in AEMFCs delivers a high peak power density of 500 mW cm−2, outperforming all of those of NPMC‐based analogs ever reported.

Simultaneously Regulating charge separation and proton supply-demand in polyphenol amine for hydrogen peroxide photosynthesis

In the H2O2 photosynthesis, apart from the charge separation, the balance of proton supply and demand was also required between the kinetically faster oxygen reduction reaction (ORR) (μs ∼ ms) and the sluggish kinetics of water oxidation reaction (WOR) (s). Faced by this challenge, the article designed the heterojunction photocatalyst formed by in-situ polymerization of polyphenol amine on the surface of CdS under alkaline conditions. As a result, the synthesized CdS-Poly(catechol-hexamethylenediamine) (PCHA) produced 6.1 mM H2O2 after 8 h of visible light irradiation, which is 29 times that of CdS. The experimental results evidenced that the coating of PCHA increased the charge separation and mobility, inhibited the photocorrosion of CdS, and thus enhanced the stability and photoactivity. Moreover, the catechol units of PCHA could function as a proton supplier and regulate local protons concentrations around the catalytic active sites to balance the proton supply–demand in the ORR and WOR at different reaction time scales.

Symmetry-Broken Ru Nanoparticles with Parasitic Ru-Co Dual-Single Atoms Overcome the Volmer Step of Alkaline Hydrogen Oxidation.

Efficient dual-single-atom catalysts are crucial for enhancing atomic efficiency and promoting the commercialization of fuel cells, but addressing the sluggish kinetics of hydrogen oxidation reaction (HOR) in alkaline media and the facile dual-single-atom site generation remains formidable challenges. Here, we break the local symmetry of ultra-small ruthenium (Ru) nanoparticles by embedding cobalt (Co) single atoms, which results in the release of Ru single atoms from Ru nanoparticles on reduced graphene oxide (Co1 Ru1,n /rGO). In situ operando spectroscopy and theoretical calculations reveal that the oxygen-affine Co atom disrupts the symmetry of ultra-small Ru nanoparticles, resulting in parasitic Ru and Co dual-single-atom within Ru nanoparticles. The interaction between Ru single atoms and nanoparticles forms effective active centers. The parasitism of Co atoms modulates the adsorption of OH intermediates on Ru active sites, accelerating HOR kinetics through faster formation of *H2 O. As anticipated, Co1 Ru1,n /rGO exhibits ultrahigh mass activity (7.68 A mgRu -1 ) at 50 mV and exchange current density (0.68 mA cm-2 ), which are 6 and 7 times higher than those of Ru/rGO, respectively. Notably, it also displays exceptional durability surpassing that of commercial Pt catalysts. This investigation provides valuable insights into hybrid multi-single-atom and metal nanoparticle catalysis.

Symmetry‐Broken Ru Nanoparticles with Parasitic Ru‐Co Dual‐Single Atoms Overcome the Volmer Step of Alkaline Hydrogen Oxidation

AbstractEfficient dual‐single‐atom catalysts are crucial for enhancing atomic efficiency and promoting the commercialization of fuel cells, but addressing the sluggish kinetics of hydrogen oxidation reaction (HOR) in alkaline media and the facile dual‐single‐atom site generation remains formidable challenges. Here, we break the local symmetry of ultra‐small ruthenium (Ru) nanoparticles by embedding cobalt (Co) single atoms, which results in the release of Ru single atoms from Ru nanoparticles on reduced graphene oxide (Co1Ru1,n/rGO). In situ operando spectroscopy and theoretical calculations reveal that the oxygen‐affine Co atom disrupts the symmetry of ultra‐small Ru nanoparticles, resulting in parasitic Ru and Co dual‐single‐atom within Ru nanoparticles. The interaction between Ru single atoms and nanoparticles forms effective active centers. The parasitism of Co atoms modulates the adsorption of OH intermediates on Ru active sites, accelerating HOR kinetics through faster formation of *H2O. As anticipated, Co1Ru1,n/rGO exhibits ultrahigh mass activity (7.68 A mgRu−1) at 50 mV and exchange current density (0.68 mA cm−2), which are 6 and 7 times higher than those of Ru/rGO, respectively. Notably, it also displays exceptional durability surpassing that of commercial Pt catalysts. This investigation provides valuable insights into hybrid multi‐single‐atom and metal nanoparticle catalysis.

Fe–Ni–F electrocatalyst for enhancing reaction kinetics of water oxidation

Highly active and low-cost oxygen evolution reaction (OER) catalytic electrodes are extremely essential for exploration of green hydrogen via water splitting. Herein, an advanced Fe–Ni–F electrocatalyst is fabricated by a facile annealing strategy using ammonium fluoride, of which the structure feature is unveiled by XRD, FESEM, TEM, EDS, BET, and XPS measurements. The as-prepared Fe–Ni–F addresses a low overpotential of 277 mV and a small Tafel slope of 49 mV dec−1 at a current density of 10 mA cm−2, significantly outperforming other control samples as well as the state-of-the-art RuO2. The advanced nature of our Fe–Ni–F catalyst could also be further evidenced from the robust stability in KOH alkaline solution, showing as 5.41% degradation after 24 h continuous working. Upon analysis, it suggests that the decent catalytic activity should be attributed to the formed bimetallic (oxy)hydroxides because of the introduction of fluoride and the synergistic effect of iron and nickel towards oxygen generation. This work represents the potential of Fe- and/or Ni-based fluoride as efficient catalyst for low-energy consumption oxygen generation.

Unraveling the atmospheric oxidation mechanism and kinetics of naphthalene: Insights from theoretical exploration

Naphthalene, the most abundant polycyclic aromatic hydrocarbon in the atmosphere, significantly influences OH consumption and secondary organic aerosol (SOA) formation. Naphthoquinone (NQ) is a significant contributor to ring-retaining SOA from naphthalene degradation, impacting the redox properties and toxicity of ambient particles. However, inconsistencies persist regarding concentrations of its isomers, 1,2-NQ and 1,4-NQ. In present work, our theoretical investigation into naphthalene's reaction with OH and subsequent oxygenation unveils their role in SOA formation. The reaction kinetics of initial OH and subsequent O2 oxidation was extensively studied using high-level quantum chemical methods (DLPNO-CCSD(T)/aug-ccpVQZ//M052x-D3/6–311++G(d,p)) combined with RRKM/master equation simulations. The reactions mainly proceed through electrophilic addition and abstraction from the aromatic ring. The total rate coefficient of naphthalene + OH at 300 K and 1 atm from our calculation (7.2 × 10−12 cm3 molecule−1 s−1) agrees well with previous measurements (∼1 × 10−11 cm3 molecule−1 s−1). The computed branching ratios facilitate accurate product yield determination. The largest yield of 1-hydroxynaphthalen-1-yl radical (add1) producing the major precursor of RO2 is computed to be 93.8 % in the ambient environment. Our calculated total rate coefficient (5.2 × 10−16 cm3 molecule−1 s−1) for add1 + O2 closely matches that of limited experimental data (8.0 × 10−16 cm3 molecule−1 s−1). Peroxy radicals (RO2) generated from add1 + O2 include 4-cis/trans-(1-hydroxynaphthalen-1-yl)-peroxy radical (add1-4OOadd-cis/trans, 66.0 %/17.5 %), 2-cis/trans-(1-hydroxynaphthalen-1-yl)-peroxy radical (add1-2OOadd-cis/trans, 10.3 %/6.3 %). Regarding the debated predominance of 1,4-NQ (corresponding to the parent RO2, i.e., add1-4OOadd-cis/trans) and 1,2-NQ (corresponding to the parent RO2, i.e., add1-2OOadd-cis/trans) in the atmosphere, our findings substantiate the dominance of 1,4-NQ. This study also indicates potential weakening of 1,4-NQ's dominance due to competition from decomposition reactions of add1-4OOadd-cis/trans and add1-2OOadd-cis/trans. Precise reaction kinetics data are essential for characterizing SOA transformation derived from naphthalene and assessing their climatic impacts within modeling frameworks.

An Interface-cascading Silicon Photoanode with Strengthened Built-in Electric Field and Enriched Surface Oxygen Vacancies for Efficient Photoelectrochemical Water Splitting.

To promote interfacial charge transfer process and accelerate surface water oxidation reaction kinetics for photoelectrochemical (PEC) water splitting over n-type Silicon (n-Si) based photoanodes, herein, starting with surface stabilized n-Si/CoOx , a NiOx /NiFeOOH composite overlayer was coated by atomic layer deposition and spray coating to fabricate the multilayer structured n-Si/CoOx /NiOx /NiFeOOH photoanode. Encouragingly, the obtained n-Si/CoOx /NiOx /NiFeOOH photoanode exhibits much increased PEC activity for water splitting, with onset potential cathodically shifted to ~0.96 V vs. RHE and photocurrent density increased to 22.6 mA cm-2 at 1.23 V vs. RHE for OER, as compared to n-Si/CoOx , even significantly surpassing the counterpart n-Si/CoOx /NiOx /FeOOH and n-Si/CoOx /NiOx /NiOOH photoanodes. Photophysical and electrochemical characterizations evidence that the deposited CoOx /NiOx /NiFeOOH composite overlayer would create large band bending and strong built-in electric field at the introduced cascading interfaces, thereby producing a large photovoltage of 650 mV to efficiently accelerate charge transfer from the n-Si substrate to the electrolyte for water oxidation. Furthermore, the surface oxygen vacancy enriched NiFeOOH overlayer could effectively catalyze the water oxidation reaction by thermodynamically reducing the energy barrier of rate determining step for OER.

Modified photoanode by in situ growth of covalent organic frameworks on BiVO4 for oxygen evolution reaction.

The development of efficient oxygen evolution reaction (OER) catalysts is of great significance because the water oxidation reaction at the photoanode is the rate-determining step in photoelectrocatalytic (PEC) water splitting. Herein, two hybrid photoanodes named BiVO4/COF-Azo and BiVO4/COF-Ben were prepared by in situ solvothermal growth on a modified BiVO4 photoanode. Characterization results revealed that the Azo and Ben COFs could match with BiVO4 well to form heterojunctions, which could effectively enhance the separation efficiency of photogenerated carriers. Also, the smaller impedance of the composite photoanodes and faster kinetics of the water oxidation reaction promoted the charge transmission and enhanced the reaction efficiency of the surface-reaching holes, respectively. As a result, the composite photoanodes exhibited a larger photocurrent and more negative onset potential compared to the pristine BiVO4. This work not only provides a new strategy to construct efficient hybrid photoanodes, but also expands the applications of COFs.

Oxidation pathways and kinetics of the 1,1,2,3-tetrafluoropropene (CF2CF-CH2F) reaction with Cl-atoms and subsequent aerial degradation of its product radicals in the presence of NO.

To give a comprehensive account of the environmental acceptability of 1,1,2,3-tetrafluoropropene (CF2CF-CH2F) in the troposphere, we have examined the oxidation reaction pathways and kinetics of CF2CF-CH2F initiated by Cl-atoms using the second-order Møller-Plesset perturbation (MP2) theory along with the 6-31+G(d,p) basis set. We also performed single-point energy calculations to further refine the energies at the CCSD(T) level along with the basis sets 6-31+G(d,p) and 6-311++G(d,p). The estimation of the relative energies and thermodynamic parameters of the CF2CF-CH2F + Cl reaction clearly shows that Cl-atom addition reaction pathways are more dominant compared to H-abstraction reaction pathways. The value of the rate coefficient for each reaction channel is calculated using the conventional transition state theory (TST) over the temperature range of 200-1000 K at 1 atm. The estimated overall rate coefficients for the title reaction are found to be 1.10 × 10-12, 1.21 × 10-10, and 1.13 × 10-8 cm3 per molecule per s via the respective calculation methods viz. MP2/6-31+G(d,p), CCSD(T)//MP2/6-31+G(d,p), and CCSD(T)/6-311++G(d,p)//MP2/6-31+G(d,p), at 298.15 K. Moreover, the calculated rate coefficients and percentage branching ratio values suggest that the Cl-atom addition reaction at the β-carbon atom is more preferable to that of the α-carbon addition to CF2CF-CH2F. Based on the rate coefficient values calculated by the three different methods, the atmospheric lifetime for the title reaction at 298.15 K is estimated. The radiative efficiency (RE) and Global Warming Potential (GWP) results of the title molecule show that its GWP would be negligible. Further, we have explored the degradation of its product radicals in the presence of O2 and NO. From the degradation results, we have found that CF2(Cl)COF, FCOCH2F, FCFO and FCOCl are formed as stable end products along with various radicals such as ˙CF2Cl and ˙CH2F. Therefore, these findings of kinetic and mechanistic data can be applied to the development and implementation of a novel CFC replacement.