Jouyban-Acree Model Research Articles

Physicochemical properties and CO2 absorption performance of poly(ethylene glycol) 300 + hydroxyethyl ethylenediamine mixed solution

Density (ρ) and viscosity (η) data of the polyethylene glycol 300 (PEG300) and hydroxyethyl ethylenediamine (AEEA) mixed solution were measured at P = 1005 hPa and T = (298.15–318.15) K. Following these data, Jouyban-Acree model exhibited superior correlation to density in the mixed system compared to nonlinear least square method, while the McAllister four-body equation yielded a better fitting for kinematic viscosity than other models. Utilizing ρ and η data, the Redlich-Kister equation was employed for the systematic computation and analysis of excess molar volume (VmE), excess activation Gibbs free energy (ΔG*E), partial molar volumes (V1¯ and V2¯), and viscosity deviation (Δη) in the PEG300 (1) + AEEA (2) mixed solution. These excess properties indicated the advantageous nature of intermolecular binding in the PEG300 (1) + AEEA (2) mixed solution, further substantiated on the basis of various spectroscopic characterizations. Finally, under conditions of CO2 flow rate at 150 mL/min, absorption experiments were conducted for 4 h in the PEG300 (1) + AEEA (2) mixed solution, pure AEEA, and pure PEG300, which indicated that the mixed solution exhibited the highest CO2 absorption capacity of 0.95 mol CO2/mol AEEA, demonstrating superior absorption performance compared to the two pure substances.

Experimental and model-based approach to evaluate solvent effects on the solubility of the pharmaceutical artemisinin

The separation and purification of plant-based Active Pharmaceutical Ingredients (API) from extracts is a crucial part in pharmaceutical process development. For the purification of the antimalarial drug component artemisinin (ARTE) from an Artemisia anna L. toluene extract, antisolvent crystallization is considered. Solubilities of ARTE in binary solvent mixtures of toluene and two potential antisolvents, n-heptane and ethanol, were determined at temperatures from 278.15 K to 313.15 K. The experimental work was supported by the application of various models, utilizing varying amounts of experimental input data. The goal was the identification of models that are able to predict solubilities in binary solvent mixtures sufficiently accurate and, thus, can help to reduce the experimental effort for future solvent screenings. In this study, we applied the PC-SAFT model both with and without fitting the binary interaction parameter kij between ARTE and the respective solvent, as well as the empirical Jouyban-Acree model. From the experiments, n-heptane demonstrated to be a promising antisolvent, while ethanol acted more as a cosolvent. All models tested were capable of distinguishing between effective and ineffective antisolvents. The purely predictive PC-SAFT model applied with kij = 0 exhibited the largest deviation from the experimental data. This was followed by the PC-SAFT model including fitted kij values, based on at least four experimental data points. The Jouyban-Acree model fitted the data most accurately. Its parametrization required a minimum of ten experimental data points.

Solid-liquid equilibrium of in some pure solvents and binary solvents from 293.15 K to 318.15 K

The solubility of nicotinohydrazide in two binary solvents were determined by a static weight method from 293.15 to 318.15 K. It found that the solubility of nicotinohydrazide was influenced by temperature, solvent polarity, and solvent composition. Meanwhile, the TG-DSC analysis was used to obtain the weight change and thermal effect of nicotinohydrazide. The XRD analysis indicated that the crystal morphology of nicotinohydrazide was coincident in five different solvents. Furthermore, the models including modified Apelblat equation, Van’t Hoff equation, Jouyban-Acree model, and CNIBS/R-K model were used to fit the experimental data. It was concluded that the four models were reliable in fitting the experimental data. Then the dissolution apparent thermodynamic was obtained, which explained well the dissolution of nicotinohydrazide. This study could help optimize and control the industrial crystallization of nicotinohydrazide.

A study on thermophysical properties of binary mixtures of n-hexane with benzene and some alkyl-substituted benzenes within temperature range (293.15–323.15) K: Experimental and modeling approach

The current work reports densities and sound speeds, and related thermodynamic excess properties, namely excess molar volumes and excess isentropic compressibilities, measured at temperatures from (293.15 to 323.15) K and under atmospheric pressure conditions for binary mixtures of n-hexane with benzene, toluene, ethylbenzene, o-xylene, m-xylene, and p-xylene. Redlich-Kister polynomial correlated the thermodynamic excess properties to test the quality of experimental data. Excess properties contributed to understanding molecular interactions between involved molecules and the peculiarities of their packing in the mixture. The Jouyban-Acree model was used to correlate the mixtures' experimental densities, sound speeds, and their related derived properties, namely isobaric thermal expansivities and isentropic compressibilities. The average absolute percentage deviation of the correlated values from the experimental ones was better than 0.036 %, 0.058 %, 0.040 %, and 0.146 % for density, sound speed, isobaric thermal expansivity, and isentropic compressibility, respectively, attesting to the robustness of the Jouyban-Acree correlations. Additionally, the Perturbed Chain Statistical Associating Fluid Theory Equation of State modeled the densities of the current mixtures. Schaaff's Collision Factor Theory and Nomoto's relation were compared for their ability to model the sound speeds of the mixtures. The efficacy of these models was tested by computing the average absolute percentage deviations between experimental and computed values. The modeled densities are reasonably concordant with experimental data, with an overall deviation of 0.02 %. Notably, Nomoto's relation exhibited superior performance over Schaaff's theory in modeling sound speeds of current mixtures, with an overall deviation of 0.33 %. The current findings underline the efficacy and versatility of the used models for thermodynamic modeling in systems of varying complexity.

Study on the molecular interactions of binary mixtures of N-methyl benzyl amine with halo methane’s through thermodynamic properties and correlation with the Jouyban–Acree model

ABSTRACT The thermodynamic and transport properties of binary mixtures of N-methyl benzyl amine (NMBA) with halo methane compounds at temperatures from 303.15 K to 313.15 K were investigated. The study analysed the excess molar volume, excess isentropic compressibility, deviation in viscosity, and excess Gibbs free energy for activation of viscous flow using measured densities (ρ), viscosities (η), and speeds of sound (u). The research also examined the impact of the inductive effect on excess properties concerning intermolecular attractive forces between the respective constituents. Furthermore, the Jouyban–Acree model was employed to correlate density, speed of sound, and viscosity with composition and obtained good agreement.

Investigation of the solubility and thermodynamics of salicylic acid in 2-propanol and ethylene glycol/propylene glycol binary solvent mixtures at (293.15 to 313.15) K

This study aimed to measure both the solubility and thermodynamics of salicylic acid in binary solvent mixtures of (2-propanol + ethylene glycol) and (2-propanol + propylene glycol) at different temperatures in the range of 293.2–313.2 K. The experimental solubility data were analyzed using various linear and nonlinear cosolvency models, such as the van’tt Hoff, Jouyban-Acree, Jouyban-Acree-van’tt Hoff, mixture response surface and modified Wilson models and to evaluate the models, the mean relative deviations of the back-calculated solubility data were compared with experimental values. Through this analysis, the apparent thermodynamic parameters, including Gibbs energy, enthalpy, and entropy were calculated using the van’tt Hoff and Gibbs equations for this system. Additionally, the density values for salicylic acid saturated mixtures were also measured and represent mathematically using the Jouyban-Acree model.

Determination and correlation of the solubility of magnesium sulfate in ethanol solutions with different concentrations: Application to the removal of magnesium from zinc electrolytic waste solution

In this study, the solubility of anhydrous magnesium sulfate (MgSO4) in ethanol solutions with concentrations ranging from 10 % to 50 % was determined at 15–50 °C. Next, the results were correlated by using the Apelblat model, polynomial empirical equation, ideal solution equation of state model, and Van’t Hoff–Jouyban–Acree model. The results indicated that all four models exhibited correlation coefficients greater than 97 %, and average relative deviations of 3.82 %, 4.24 %, 3.96 %, and 3.96 %, respectively. Notably, the Apelblat model was found to be more accurate and reliable in correlating the solubility of MgSO4 in ethanol solutions with different concentrations. Further, the Van’t Hoff equation was applied to determine the enthalpy and entropy of dissolution. Herein, a certain amount of anhydrous ethanol was added to the zinc (Zn) electrolytic waste solution (ZEWS) to crystallize Zn2+ and Mg2+ through the solvent crystallization method, with the precipitation rates reaching 20.13 % and 39.38 %, respectively. The concentration of Mg2+ reduced to below 15 g⋅L−1, meeting the quality standard of ZEWS. The XRD, TG, and SEM analyses of the output salt mix crystallization confirmed the primary components to be MgSO4·7H2O and ZnSO4·7H2O, with the morphological features primarily consisting of short rods and some crystal agglomerates. This study shows that the removal of Mg2+ from Zn smelting process can be effectively achieved by the proposed solvent crystallization method.

Study on the molecular interactions of some binary mixtures through thermodynamic properties and FT-IR spectra and correlation with the Jouyban–Acree model

ABSTRACT Densities (ρ), speeds of sound (u) and viscosities (η) were measured for three binary mixtures of propargyl alcohol with tetra chloromethane, trichloromethane, and dichloromethane from 303.15 K to 313.15 K at atmospheric pressure across the composition range. Excess molar volume, excess isentropic compressibility, deviation in viscosity, and excess Gibbs free energy of activation of viscous flow were calculated. Partial molar properties and infinite dilution molar partial properties were also determined for each system. Results suggest heteroassociates forming cross complexes and chemical forces with specific interactions. PFP theory was used to identify the predominant molecular interactions. The Jouyban–Acree model findings were discussed, considering mean relative deviation (MRDs) and individual relative deviation (IRD) between calculated and experimental data. FTIR studies were included to corroborate the experimental findings.

Solubility and thermodynamics properties of salicylic acid in binary mixtures 1-propanol and propylene glycol/ethylene glycol monomethyl ether at different temperatures

The research aimed to investigate the solubility and thermodynamics of salicylic acid in two binary solvent mixtures of (1-propanol+propylene glycol) and (ethylene glycol monomethyl ether+1-propanol). The study was conducted in the temperature range of 293.2 to 313.2K. To analyze the experimental solubility data, several linear and nonlinear cosolvency models, such as the van't Hoff, Jouyban-Acree, Jouyban-Acree-van't Hoff, mixture response surface, and modified Wilson models were employed. The models' effectiveness was evaluated by comparing the mean relative deviations of the back-calculated solubility data to the experimental values. In addition, the apparent thermodynamic parameters, including Gibbs energy, enthalpy, and entropy, were calculated using the van't Hoff and Gibbs equations. Furthermore, the study measured the density values for salicylic acid-saturated mixtures and represented them mathematically through the Jouyban-Acree model.

Determination of solubility of sildenafil citrate in propylene glycol + 2-propanol and N-methyl pyrrolidone + water: Comparing solubilization power of aqueous or non-aqueous mixtures

For identifying the solubilization power of aqueous and non-aqueous solvent mixtures for sildenafil citrate (SLC), its solubility was determined in four mono-solvents of propylene glycol, 2-propanol, N-methyl pyrrolidone and water along with the binary solvent mixtures of propylene glycol + 2-propanol and N-methyl pyrrolidone + water at 293.2 to 313.2 K and at pressure of 85 kPa. Among the neat organic solvents and also water, N-methyl pyrrolidone presented a high solubilization power for SLC (8.66 × 10-2 at 313.2 K) and its aqueous binary mixtures had also a more ability to solubilize the drug in compared with the binary (propylene glycol + 2-propanol) mixtures (with the highest value of 4.96 × 10–4 at 313.2 K). Besides, increasing the solubility of SLC with raising temperature illustrated that its dissolution in the aforementioned mixtures was endothermic. The equilibrium solid phase crystal of SLC was also characterized with X-ray powder diffraction analysis to identify no polymorphic transformation, solvate formation or crystal transition during the whole solvent crystallization process. Moreover, the experimental mole fractions were modelled by used commonly cosolvency models and regressed the model parameters. The back-calculated mole fractions of SLC by cosolvency models shown a better agreement with the experimental data (overall mean percentage deviation (OMPD) ≤ 7.6 %) and Jouyban-Acree model as a function of temperature and solvent compositions had the best performance (MPD of 3.2 %). Furthermore, the solubility data sets of SLC in 7 binary solvent mixtures were collected from the literature and correlated with the Jouyban-Acree model and its derivates, the OMPDs for the back-computed solubility indicating the generally trained models, especially Jouyban-Acree-Abraham model (MPD of 24.2 %), had an acceptable ability in the prediction of SLC solubility and can be useful in the pharmaceutical industry. Finally, apparent thermodynamic properties of Gibbs free energy, standard enthalpy and entropy of the dissolution processes were also investigated.

Thermo physical properties and IR spectral studies of some binary liquid mixtures and correlation with the Jouyban–Acree model

ABSTRACT Excess molar volume, excess isentropic compressibility, deviation in viscosity and excess Gibbs free energy for activation of viscous flow for binary mixtures of propargyl alcohol (J) with benzyl aldehyde (J1), benzylamine (J2) and benzyl alcohol (J3) components with selected compositions were determined from the measured values of densities (ρ), viscosities (η), and speeds of sound (u) of pure components and their mixtures from 303.15 K to 313.15 K. The effect of various functional groups on the excess properties has been discussed in terms of attractive forces between the components. The results of the Jouyban-Acree model are discussed in terms of the mean relative deviation and individual relative between the calculated and experimental densities, speed of sound, and viscosities as an accuracy criterion.FTIR studies have also been added to confirm the experimental findings of the investigated mixtures

Excess properties for binary liquid mixtures of Hexylene glycol with ketones at different temperatures and correlation with the Jouyban–Acree model

ABSTRACT Excess molar volume, excess isentropic compressibility, deviation in viscosity, and excess Gibbs free energy of activation of viscous flow for binary mixtures of Hexylene glycol (2-methyl-pentanediol-2,4 or MPD) with aliphatic ketones (4-hydroxy-4-methyl-pentan-2-one (J1), 4-methyl-pentan-2-one (J2), and pentan-2-one (J3)) components selected compositions were determined from the measured values of densities (ρ), viscosities (η), and speeds of sound (u) of pure components and their mixtures from 303.15 K to 313.15 K. The results were analysed in terms of intermolecular interactions or hydrogen bonding or hetero-association interactions in the binary mixtures. Finally, the Prigogine-Flory-Patterson (PFP) theory is applied to identify the most predominant molecular interaction. The results of the Jouyban-Acree model are discussed in terms of mean relative deviation (MRDs) and individual relative deviation (IRD) between calculated and experimental densities, speeds of sound, and viscosities as an accuracy criterion.

Experimental and molecular simulation analysis of the dissolution behavior of Musk ambrette in organic solvents

The solubility of Musk ambrette in i-propanol (IPA), i-butanol (IBA), n-heptane (HPT), n-hexane (HX), cyclohexane (CYH), methyl acetate (MAC), ethyl acetate (EAC), acetone (ACE), IPA + ACE at 278.15 K to 318.15 K was determined. The mole fraction solubility of Musk ambrette in pure IPA at the temperature of 298.15 K were found to be 0.9492 × 10-2 mol·mol−1. The difference is that the solubility of Musk ambrette in ACE reaches 0.2257 mol·mol−1, which is much higher than the solvent mentioned above. The strong intermolecular hydrogen bonding formed by IPA resulted in its lowest solvation capacity for Musk ambrette. In addition, to further investigate the solubility pattern of Musk ambrette, we used 8 models (Van’t Hoff, modified Apelblat, Buchowski-Ksiazczak, Yaws, NRTL, Wilson, Jouyban-Acree and Sun model) to fit and obtain a general equation for solubility versus temperature. These results yielded a large amount of statistically significant data. Comparisons revealed that the modified Apelblat and Yaws equation showed the least deviation in forecasting solubility variations with temperature. Meanwhile, we proved that the dissolution of Musk ambrette is a heat-absorbing entropy increasing process by Van't Hoff equation calculation. ΔsolGo for the 12 solvents is in the following order: ACE < MAC < EAC < w = 0.2007 < w = 0.4025 < w = 0.6076 < CYH < w = 0.8070 < HPT < HX < IBA < IPA. ΔsolGo is smaller the easier it dissolves, which is consistent with the law of dissolution. Secondly, we performed thermal analysis and X-ray diffraction tests on Musk ambrette crystals prepared in different solvents, which showed that none of the several systems investigated led to the creation of new crystalline forms or solvatoids, further confirming the suitability of the solvents. Besides, we discuss the correspondence between solubility and the HSP, π, α, β, and CED of the solvents and thus tentatively confirm the significant influence of the solvent properties on solubility. The principle of similarity and compatibility is satisfied for most of the solvents. In particular, the CED values of the larger solvents were not favorable for the solubilization of Musk ambrette. We also analyzed the molecular surface electrostatic potential of Musk ambrette by visualization techniques. Finally, IPA and ACE and their binary solution systems were analyzed by molecular dynamics simulations. The effect of solvent intermolecular interactions on the solubilization pattern was discussed. It was further confirmed that weak interactions of solvent molecules contribute more to the dissolution of Musk ambrette. These findings suggest that the prediction of solvent solubility can be initially achieved by molecular simulation techniques. Undoubtedly, this study will furnish a valuable information for the purification of Musk ambrette.

FT-IR studies and excess thermodynamic properties of binary mixtures at various temperatures and correlation with the Jouyban–Acree model

ABSTRACT Densities (ρ), speeds of sound (u), and viscosities (η) for three binary mixtures of 4-Hydroxy-4-methyl-pentan-2-one with 3-amino-propan-1-ol, 2-amino-2-methyl-propan-1-ol, and 1-amino propan-2-ol were calculated at temperatures ranging from 303.15 to 313.15 K and atmospheric pressure over the entire composition range. Experimental measurements were used to calculate the excess molar volume, excess isentropic compressibility, deviation in viscosity, and excess Gibbs free energy of the activation of viscous flow. Partial molar properties and infinite dilution molar partial properties are also calculated for each binary system. Heteroassociates molecules forming complexes and chemical forces with specific interactions can be discussed from the results. The Prigogine–Flory–Patterson theory is used to identify the most important interaction. The results of the Jouyban–Acree model are discussed in terms of the mean relative deviation and individual relative between the calculated and experimental densities, speed of sound, and viscosities as an accuracy criterion. FTIR studies confirm the experimental findings of the investigated mixtures.

Study on the molecular interactions of binary mixtures of allyl alcohol and amino-alcohol solvents through thermodynamic properties and FT-IR spectra and correlation with the Jouyban–Acree model

ABSTRACT Densities (ρ), speeds of sound (u), and viscosities (η) for three binary mixtures of allyl alcohol with 3-amino-propan-1-ol, 2-amino-2-methyl-propan-1-ol (aminomethyl propanol), and 1-amino propan-2-ol (isopropanol amine) were calculated at temperatures ranging from 303.15 to 313.15K and at atmospheric pressure over the entire composition range. Experimental measurements were used to calculate the excess molar volume, excess isentropic compressibility, deviation in viscosity, and excess Gibbs free energy of the activation of viscous flow. Partial molar properties and partialmolar properties at infinite dilution are also calculated. The Prigogine–Flory–Patterson (PFP) theory is applied to identify the predominant molecular interaction. The results of the Jouyban–Acree model are discussed in terms of the mean relative deviation (MRDs) and individual relative deviation (IRD) between the calculated and experimental parameters as an accuracy criterion. FTIR studies have also been added to confirm the experimental findings of the investigated mixtures.

Density, viscosity, excess properties, and intermolecular interaction of propylene glycol methyl ether + 1,2-propylenediamine binary system

In this work, the systematic measurements of physicochemical properties, viz., density (ρ) and viscosity (η) values of propylene glycol methyl ether (PGME) + 1,2-propylenediamine (1,2-PDA) binary system, including pure substances, over the entire mole fraction range at the temperatures of T/K = (298.15 to 318.15) under atmospheric pressure of P = 100.5 kPa. The fundamental data were used to calculate several excess properties, including excess molar volume (VmE), viscosity deviation (Δη), and excess activation Gibbs free energy (ΔG∗E). Meanwhile, the work further investigated the values of thermal expansion coefficient (αp), partial molar volume (V¯) and apparent molar volume (Vφ), thereby offering a comprehensive understanding on non-ideal behavior of the binary system. Furthermore, the variations in ρ values with various molar ratios and temperatures were evaluated through Jouyban-Acree model and nonlinear least squares method. Simultaneously, Grunberg-Nissan model, Eyring-Margules model, Heric model, and McAllister model, were used to fit the dependence of η values on the molar ratio. Arrhenius equation was employed to fit the temperature dependency of η values. In addition, Redlich-Kister (R-K) equation was utilized to fit the VmE, Δη, and ΔG∗E values of binary system. Based on spectral analyses of Raman, ultra-violet (UV), and 1H Nuclear Magnetic Resonance (NMR) and density functional theory (DFT) calculation, the intermolecular hydrogen bond (IHB) of PGME with 1,2-PDA was discussed in depth.

Solubility measurement, molecular simulations, Hansen solubility parameter and thermodynamic properties of isophthalic acid in binary solvents at 283.15–323.15 K

The solubility of isophthalic acid (IPA) in four different binary solvent systems (water + methanol, water + ethanol, water + 1-propanol, and water + isopropanol) was measured by the gravimetric method at atmospheric pressure from 283.15 K to 323.15 K. Under certain solvent compositions, the solubility of IPA increased with increasing temperature. The trend of solubility under isothermal conditions setting differs as the mole fraction of organic solvent increases. The solubility of IPA in water + methanol and water + ethanol systems increased with the mole fraction of methanol or ethanol. In the system of water + 1-propanol and water + isopropanol, as the mole fraction of organic solvent increased, the solubility of IPA increased firstly and then decreased gradually. The Hansen solubility parameters of IPA and selected solvents were analyzed, the analysis showed that the miscibility of IPA with the selected solvent was the result of many factors. Molecular electrostatic potential surface (MEPS) and Hirshfeld surface (HS) analysis were used to investigate the intermolecular interactions. The solubility data were correlated using the Apelblat equation, van't Hoff equation, λh equation, and Jouyban–Acree model. Besides, the vant Hoff equation was employed to analyze the apparent thermodynamic properties of dissolving process including the Gibbs energy, enthalpy and entropy. All positive values indicated that the dissolving process of IPA was non-spontaneous, endothermic, and entropy-driven.

Study on the molecular interactions of binary mixtures of allyl alcohol with isomeric amyl alcohol solvents through thermodynamic properties and FT-IR spectra and correlation with the Jouyban–Acree model

ABSTRACT Excess molar volume, excess isentropic compressibility, deviation in viscosity and excess Gibbs free energy for activation of viscous flow for binary mixtures of allyl alcohol (AA) with 2-methyl-2-butanol (2M2B), 2-methyl-1-butanol (2M1B) and 3-methyl-2-butanol (3M1B) components in different compositions were determined from the measured values of densities (ρ), viscosities (η) and speeds of sound (u) of pure components and their mixtures at various temperatures ranging from 303.15 K to 313.15 K. The excess properties have been discussed in terms of disruption of H-bonding and dipole–dipole interaction between the components of the mixtures. The Jouyban–Acree model results are discussed in terms of mean relative deviation (MRD) and individual relative deviation (IRD) between calculated and experimental parameters as an accuracy criterion and obtained a good agreement. The thermodynamic functions of activation of viscous flow have been estimated and tested. FTIR studies further confirm the experimental findings.

Thermodynamic parameters of hexylene glycol with isomeric butanols at various temperatures

ABSTRACT Excess molar volume, excess isentropic compressibility, deviation in viscosity and excess Gibbs free energy of activation of viscous flow for binary mixtures of Hexylene glycol (2-methyl-2,4-pentanediol- or MPD) with 1-butanol (J1), 2-butanol (J2) and 2-methyl-2-propanol (J3) components selected compositions were determined from the measured values of densities (ρ), viscosities ( η ), and speeds of sound (u) of pure components and their mixtures from 303.15 K to 313.15 K. The results are analysed in terms of intermolecular interactions or hydrogen bonding or hetero-association interactions in the binary mixtures. Finally, the Prigogine-Flory-Patterson (PFP) Theory is applied to identify the most predominant molecular interaction. Using Jouyban–Acree model, results are discussed in terms of mean relative deviation (MRDs) and individual relative deviation (IRD) between calculated and experimental densities, speeds of sound and viscosities as an accuracy criterion.

Thermophysical properties of binary liquid mixtures at various temperatures, supported by FTIR spectral studies and correlation with the Jouyban–Acree model (allyl alcohol, benzyl aldehyde, benzylamine and benzyl alcohol)

ABSTRACT Excess molar volume, excess isentropic compressibility, deviation in viscosity and excess Gibbs free energy for activation of viscous flow for binary mixtures of allyl alcohol (C) with benzyl aldehyde (C1), benzylamine (C2) and benzyl alcohol (C3) components in selected compositions were determined from the measured values of densities (ρ), viscosities (η) and speeds of sound (u) of pure components and their mixtures at 303.15–313.15 K. These results were analysed by different theoretical models, such as PFP and Jouyban–Acree model. The effect of various functional groups on the excess properties was discussed in terms of disruption of H-bonding and dipole–dipole interaction between the components of the mixtures. The thermodynamic results of the present investigation have been correlated with FTIR spectral studies and have obtained a good agreement.