Joint Congruity Research Articles

Ganz femoral head reduction associated with coverage and containment procedures improve radiological and functional outcomes in Perthes' disease.

Ganz's studies made it possible to address joint deformities on both the femoral and acetabular side brought about by Perthes' disease. Femoral head reduction osteotomy (FHRO) was developed to improve joint congruency, along with periacetabular osteotomy (PAO), which may enhance coverage and containment. The purpose of this study is to show the clinical and morphological outcomes of the technique and the use of an implemented planning approach. From September 2015 to December 2021, 13 FHROs were performed on 11 patients for Perthes' disease in two centres. Of these, 11 hips had an associated PAO. A specific CT- and MRI-based protocol for virtual simulation of the corrections was developed. Outcomes were assessed with radiological parameters (sphericity index, extrusion index, integrity of the Shenton's line, lateral centre-edge angle (LCEA), Tönnis angle), and clinical parameters (range of motion, visual analogue scale (VAS) for pain, Merle d'Aubigné-Postel score, modified Harris Hip Score (mHHS), and EuroQol five-dimension five-level health questionnaire (EQ-5D-5L)). Early and late complications were reported. The mean follow-up was 39.7 months (standard deviation (SD) 26.4). The mean age at surgery was 11.4 years (SD 1.6). No major complications were recorded. One patient required a total hip arthroplasty. Mean femoral head sphericity increased from 46.8% (SD 9.34%) to 70.2% (SD 15.44; p < 0.001); mean LCEA from 19.2° (SD 9.03°) to 44° (SD 10.27°; p < 0.001); mean extrusion index from 37.8 (SD 8.70) to 7.5 (SD 9.28; p < 0.001); and mean Tönnis angle from 16.5° (SD 12.35°) to 4.8° (SD 4.05°; p = 0.100). The mean VAS improved from 3.55 (SD 3.05) to 1.22 (1.72; p = 0.06); mean Merle d'Aubigné-Postel score from 14.55 (SD 1.74) to 16 (SD 1.6; p = 0.01); and mean mHHS from 60.6 (SD 18.06) to 81 (SD 6.63; p = 0.021). The EQ-5D-5L also showed significant improvements. FHRO associated with periacetabular procedures is a safe technique that showed improved functional, clinical, and morphological outcomes in Perthes' disease. The newly introduced simulation and planning algorithm may help to further refine the technique.

Does the coronoid fracture in terrible triad injury always need to be fixed?

BackgroundThe ideal treatment of terrble triad injuries and whether fixation of coronoid process fractures is needed or not are still debated. Therefore, we aimed to investigate if terrible triad injuries necessitate coronoid fracture fixation and evaluate if non-fixation treatments have similar efficacies and outcomes as fixation-treatments in cases of terrible triad injuries.MethodsFrom August 2011 to July 2020, 23 patients with acute terrible triad injuries without involvement of the anteromedial facet of the coronoid process were included to evaluate the postoperative clinical and radiological outcomes (minimum follow-up of 20 months). According to the preoperative height loss evaluation of the coronoid process and an intraoperative elbow stability test, seven patients underwent coronoid fracture fixation, and the other eight patients were treated conservatively. The elbow range of motion (ROM), Mayo Elbow Performance Score (MEPS), and modified Broberg-Morrey score were evaluated at the last follow-up. In addition, plain radiographs were reviewed to evaluate joint congruency, fracture union, heterotopic ossification, and the development of arthritic changes.ResultsAt the last follow-up, the mean arcs of flexion-extension and supination-pronation values were 118.2° and 146.8° in the fixation group and 122.5° and 151.3° in the non-fixation group, respectively. The mean MEPSs were 96.4 in the fixation group (excellent, nine cases; good, tow cases) and 96.7 in the non-fixation group (excellent, ten cases; good, two cases). The mean modified Broberg-Morrey scores were 94.0 in the fixation group (excellent, sevev cases; good, four cases) and 94.0 in the non-fixation group (excellent, ten cases; good, tow cases). No statistically significant differences in clinical scores and ROM were identified between the two groups. However, the non-fixation group showed a significantly lower height loss of the coronoid process than the fixation group (36.3% versus 54.5%).ConclusionsThere were no significant differences in clinical outcomes between the fixation and non-fixation groups in terrible triad injuries.

Symmetry and synchrony of bimanual movements are not predicated on interlimb control coupling.

Previous studies suggest that bimanual coordination recruits neural mechanisms that explicitly couple control of the arms, resulting in symmetric kinematics. However, the higher symmetry for actions that require congruous joint motions compared with noncongruous joint motions calls into question the concept of control coupling as a general policy. An alternative view proposes that codependence might emerge from an optimal feedback controller that minimizes control effort and costs in task performance. Support for this view comes from studies comparing conditions in which both hands move a shared or independent virtual objects. Because these studies have mainly focused on congruous bimanual movements, it remains unclear if kinematic symmetry emerges from such control policies. We now examine movements with congruous or noncongruous joint motions (inertially symmetric or asymmetric, respectively) under shared or independent cursors conditions. We reasoned that if a control policy minimizes kinematic differences between limbs, spatiotemporal symmetry should remain relatively unaffected by inertial asymmetries. As shared tasks reportedly elicit greater interlimb codependence, these conditions should elicit higher bilateral covariance regardless of inertial asymmetries. Our results indicate a robust spatiotemporal symmetry only under inertially symmetric conditions, regardless of cursor condition. We simulated bimanual reaching using an optimal feedback controller with and without explicit costs of kinematic asymmetry, finding that only the latter mirrored our empirical data. Our findings support the hypothesis that bimanual control policies do not include kinematic asymmetry as a cost when it is not demanded by task constraints suggesting that kinematic symmetry depends critically on mechanical movement conditions.NEW & NOTEWORTHY Previously, the control coupling hypothesis and task-dependent control hypothesis have been shown to be robust in the bimanually symmetrical movement, but whether the same policy remains robust in the bimanually asymmetrical movement remains unclear. Here, with evidence from empirical and simulation data, we show that a spatiotemporal symmetry between the arms is not predicated on control coupling, but instead it is predicated on the symmetry of mechanical conditions (e.g. limb inertia) between the arms.

Learning emotional prompt features with multiple views for visual emotion analysis

Visual emotion analysis(VEA) aiming to detect the emotions behind images, has gained increasing attention with the development of online social media. Recent studies in prompt learning have significantly advanced visual emotion classification. However, these methods usually utilize random vectors or non-emotional texts as the initialization for prompt optimization. This restricts the emotional semantic representation of prompts and hinders the performance of the model. To tackle this problem, we leverage emotional prompts with multiple views to enhance the semantic emotional information. We first translate the image to caption as context prompt(COP) from the view of background information for the image. Additionally, we introduce hybrid emotion prompt(HEP) from the view of the interaction between the emotional visual and textual information, where different modalities are integrated with a novel Emotion Joint Congruity Learning module. Furthermore, we also provide label prompt(LP) to enhance the emotional association with labels, enabling better emotional information fusion. Extensive experiments conducted on five publicly visual emotion classification datasets, i.e. EmoSet, FI, have demonstrated the superiority of our MVP model over cutting-edge methods.

Assessment of New Radiographic Traits in Canine Hip Dysplasia (CHD)

Abstract Canine hip dysplasia (CHD) is a polygenic, multifactorial developmental disorder of the hip joint. Hip laxity, an early characteristic of CHD, leads to degeneration within the joint due to mechanical injury. Definitive diagnosis can be achieved by x-ray examination. The aim of our study is to refine CHD assessments using a quantitative planimetry method. The measurement of the Norberg angle (NA) was found subjective and insufficient to measure hip laxity on the standard ventrodorsal projection, because extension of the pelvic limbs stretches the joint capsule and supports joint congruence. Therefore, we have decided to verify other methods of detecting CHD, which include measurement of femoral head coverage (linear and area coverage) and congruence angle (AoC). These parameters could provide us with relevant information about how well the head of the femur fits into the acetabulum and thus might help to assess CHD better, and identify affected individuals better. In our study, we included 122 x-ray images of 3 breeds of dogs of both sexes and at different ages 5.6 ± 1.8 years. The highest correlation was between both femoral head linear and both area overlap for Bavarian hounds. For Bernese mountain dogs it was between right NA and linear and area femoral overlap, between both femoral head linear and both area overlap. For German shepherd dogs it was found between both NA, between right NA and right AoC, between both AoC, between both NA with both femoral overlap and between both AoC and both femoral overlap on the same side.

Open Reduction and Transosseous Plasty of the Dorsal Scapholunate Ligament in a Patient with Mayfield type IV Chronic Lunate Dislocation, Case Report, Literature Review and Description of Surgical Technique

Introduction Perilunate dislocations represent 3% of carpal injuries. They begin in a radial direction, destabilizing the scapholunate interval, and as the injury continues, there is a progressive sequence of instability, altering the anatomy of the carpus, causing significant functional deterioration. The acute diagnosis goes unnoticed, evolving into its chronic form. There are few reports of treatment in its chronic phase with a limited number of patients and follow-up evaluation is often limited. Objective We present a case of late diagnosis of chronic lunate dislocation that was managed surgically and review of the existing literature for diagnosis and treatment, as well as the surgical technique for its resolution. Clinical case 66-year-old male, fall from the plane of support, hyperextension mechanism of the right wrist, 2 months of evolution causing pain, progressive increase in volume, functional limitation. Treated with non-steroidal anti-inflammatory drugs for four weeks without improvement. Radiographically, loss of lunate joint congruity - capitate. Magnetic resonance images of avascular necrosis of the lunate. Diagnosing chronic semilunar dislocation of the right hand. Preoperative Quick-Dash 70.4 pts. A double dorsal and volar approach is performed to release the carpal tunnel, place a transosseous cerclage, and three 1.6 mm Kirschner pins in the scapholunate interval; semilunopyramidal and scaphocapitate. Immobilization with antebrachipalmar splint, removal of Kirschner pins at 7 weeks and referral to physical rehabilitation. 20 postoperative weeks, range of motion with flexion of 35° and extension of 30°, without visible sequelae to mobilization, and with Quick-Dash 20.4. Conclusion Early diagnosis and treatment are necessary to prevent the potential risk of avascular necrosis of the lunate and scaphoid, and secondary osteoarthritis. Reconstruction of the chronic pathology of lunate dislocation and scapholunate ligament (SL) remains a major challenge. There are unresolved issues regarding when to perform reconstruction rather than repair and therefore treatment remains controversial.

WEIGHT BEAR THEN DISCHARGE: A SAFE MANAGEMENT STRATEGY FOR ISOLATED WEBER B LATERAL MALLEOLUS FRACTURES. OUTCOMES OF 658 PATIENTS

Myriad protocols exist for isolated Weber B lateral malleolus fractures with a congruent tibiotalar joint on initial radiographs. Stress and weight-bearing radiographs, all at various timepoints, may be employed to identify those injuries that develop significant talar shift but consensus is elusive. This study outlines a safe and reproducible protocol for such injuries, utilising a removable orthosis, immediate weight bearing and standard supine radiographs.A retrospective analysis of a prospective trauma database was analysed to identify patients with an isolated Weber B ankle fracture with adequate presentation radiographs demonstrating a congruent mortise. Patient records and radiographs were evaluated a minimum of 5 years after initial presentation to determine ankle stability, complications, and the burden on outpatient services.Between 2014 and 2016, 657 patients were referred to the specialist trauma clinic from the emergency department. Of the 657, 52 patients had inadequate ED radiographs to determine ankle congruity. At the two-week assessment, 11 of the 52 demonstrated talar shift and required intervention. Therefore 646 patients demonstrated ankle congruity at two weeks after weight bearing. No patient demonstrated talar shift at the six-week assessment. Average number of follow up appointments was 2.4 with 3.5 radiographs. Our new treatment protocol advocates discharge after a single orthopaedic assessment after two weeks of weight bearing.This study supports immediate weight-bearing of Weber B ankle fractures with a congruent mortise in an orthosis. Follow up beyond two weeks is unnecessary and our protocol offers a safe means of significantly reducing the outpatient burden.

Long-Term Results After Hallux Valgus Correction with Distal Metatarsal Reversed-L (ReveL) Osteotomy: Factors That Influence Recurrence and the Clinical Outcome.

This study aimed to evaluate the long-term results of hallux valgus correction with a distal metatarsal reversed-L (ReveL) osteotomy. Eighty-eight patients (131 feet) were evaluated after a mean follow-up of 14.2 years (range, 10 to 18 years). Weight-bearing foot radiographs were analyzed preoperatively, at 6 weeks postoperatively, and at the final follow-up for the following parameters: hallux valgus angle (HVA), intermetatarsal angle (IMA), first metatarsophalangeal joint (MTPJ) congruence angle, sesamoid position, presence of the round sign, and first MTPJ arthritis. The visual analog scale (VAS) and the Foot and Ankle Outcome Score (FAOS) assessed postoperative pain and function. Univariate and multivariable logistic regression analyses identified risk factors for hallux valgus recurrence and an inferior clinical outcome. All radiographic parameters significantly improved at the 6-week follow-up and the final follow-up (p < 0.001). The recurrence rate (HVA >20°) was 14%. A preoperative HVA of >28° (odds ratio [OR], 9.1; p = 0.02) and a 6-week postoperative HVA of >15° (OR, 4.6; p = 0.03) were independent risk factors for recurrence. At the final follow-up, all FAOS subscales resembled high postoperative function (median, 100 points [range of the interquartile range (IQR), 81 to 100 points]). A preoperative body mass index of >30 kg/m2 was associated with lower FAOS quality of life (QOL) (p = 0.04), and postoperative hallux varus was associated with lower FAOS activities of daily living (p = 0.048). Patients with first MTPJ arthritis of grade 2 or higher at the final follow-up had significantly lower FAOS subscales (p < 0.01) except for QOL. Hallux valgus recurrence did not influence the long-term outcome. A symptomatic implant was the main cause of revision (15%). In 94% of cases, the patients were satisfied with the hallux appearance and, in 92% of cases, the patients were satisfied with postoperative pain reduction. Hallux valgus correction with a ReveL osteotomy led to high long-term satisfaction rates. A preoperative HVA of >28° and a 6-week postoperative HVA of >15° increased the risk of hallux valgus recurrence. First MTPJ arthritis was the leading cause of inferior clinical results, whereas radiographic hallux valgus recurrence had no impact on the clinical results. First MTPJ arthritis at the final follow-up was associated with an inferior clinical outcome, whereas radiographic hallux valgus recurrence had no impact on the long-term clinical results. Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Comparison of short-term clinical outcomes between open-wedge high tibial osteotomy and tibial condylar valgus osteotomy

BackgroundThis study aimed to compare radiological features and short-term clinical outcomes between open-wedge high tibial osteotomy (OWHTO) and tibial condylar valgus osteotomy (TCVO), to provide information facilitating decision-making regarding those two procedures.MethodsTwenty-seven cases involving 30 knees that had undergone OWHTO (HTO group) and eighteen cases involving 19 knees that had undergone TCVO (TCVO group) for medial compartment knee osteoarthritis (OA) were retrospectively evaluated. Patient characteristics, severity of knee OA, lower limb alignment, joint congruity and instability were measured from standing full-length leg and knee radiographs obtained before and 1 year after surgery. Range of motion in the knee joint was measured and Knee Injury and Osteoarthritis Outcome Score (KOOS) was obtained to evaluate clinical results preoperatively and 1 year postoperatively.ResultsMean age was significantly higher in the TCVO group than in the HTO group. Radiological features in the TCVO group included greater frequencies of advanced knee OA, varus lower limb malalignment, higher joint line convergence angle, and varus-valgus joint instability compared to the HTO group before surgery. However, alignment of the lower limb and joint instability improved to comparable levels after surgery in both groups. Maximum flexion angles were significantly lower in the TCVO group than in the HTO group both pre- and postoperatively. Mean values in all KOOS subscales recovered similarly after surgery in both groups, although postoperative scores on three subscales (Symptom, Pain, and ADL) were lower in the TCVO group (Symptom: HTO, 79.0; TCVO, 67.5; Pain: HTO, 80.5; TCVO, 71.1; ADL: HTO, 86.9; TCVO, 78.0).ConclusionsBoth osteotomy procedures improved short-term clinical outcomes postoperatively. TCVO appears preferable in cases of advanced knee OA with incongruity and high varus-valgus joint instability. An appropriate choice of osteotomy procedure is important to obtain favorable clinical outcomes.

Direct Anterior Bone Block Grafting for Coronoid Bone Loss and Dysplasia

Background: Critical coronoid bone loss (CCBL) can be the key factor of elbow instability, making bony reconstruction essential. Coronoid bone grafting (CBG) is challenging, with a paucity of descriptions in the literature. We present direct anterior CBG in a patient with instability, CCBL (&gt;40%), lateral ulnar collateral ligament (LUCL) insufficiency, and ligamentous laxity who underwent LUCL reconstruction in the same setting. Indications: Isolated ligament reconstruction has a high failure rate in cases with CCBL and therefore requires additional bone grafting. The diagnosis of CCBL is made with lateral radiographs and further quantified by computed tomography imaging. Instability can be best assessed objectively during arthroscopy with a switching stick. CBG performed with an anterior approach facilitates direct access with advantages for plate and screw positioning and access to the proximal radio-ulnar joint. Technique Description: First, LUCL reconstruction was performed. After harvesting of the graft from the iliac crest, the coronoid was exposed with a direct anterior approach. The incision starts centrally medial to the biceps tendon (BT) in the flexion crease extending distally (9 cm). Ligation of multiple vessels (leash of Henry) is required. The deep dissection is continued between the bicipital aponeurosis and BT. Blunt and flat Langenbeck-type retractors are used with care, laterally (BT/radial nerve) and medially (aponeurosis/median nerve). The brachialis muscle is exposed and longitudinally split in line with its fibers, gaining access to the capsule. Harmful retraction on either side of the split has to be avoided. The capsule is incised as a Z-plasty, the coronoid exposed from the joint in the distal direction prior to freshening up the graft bed. The graft is held in place with a wire joystick, sculpted, and temporarily fixed. Joint congruency, stability, and a range of motion (ROM) are checked prior to definitive fixation with a 2.4-mm buttress plate and screws. Results: The coronoid process height was successfully reconstructed from &lt;60% to 100% with durable elbow stability (&gt;1 year), free ROM, and high patient satisfaction. Conclusion: CBG can be standardized and facilitated with a direct anterior approach as a key element for successful elbow stabilization in the setting of CCBL. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.

Non-operative versus operative treatment of suprasyndesmotic ankle fractures: protocol for a prospective, multicentre, randomised controlled trial

IntroductionSurgery is widely recognised as the treatment of choice for suprasyndesmotic ankle fractures, because of the assumption that these injuries yield instability of the ankle joint. Stability assessment of ankle...

Finite element analysis to clarify effect of joint congruity on stress at articular surface of thumb carpometacarpal joint

Finite element analysis to clarify effect of joint congruity on stress at articular surface of thumb carpometacarpal joint

The relationship between depth and diameter of the human acetabulum in the dry hip bone of Maharashtra population

Abstract Background: Anatomy of the hip must be taken into account to perform the various surgical procedures like reconstruction of the acetabulum in patients with significant acetabular bone deficiency. It remains a major challenge in total hip arthroplasty. Appropriate anatomic concepts for surgery to treat femoroacetabular impingement require a precise appreciation of the native acetabular anatomy. Since the acetabulum is not always of the same shape, width or depth, joint congruence is frequent with minor anatomical variations in the shape of the acetabulum. Hence, the present study was undertaken as controversies still exist on the importance of these variations and to prevent problems following surgical procedures such as acetabular reconstruction and femoroacetabular impingement. Method: 81 dry human hip bones of unknown sex were taken for observation from departments of anatomy at Dr SCGMC Nanded and SRTRGMC Ambajogai. All hip bones were adult-type. The exact age and sex of hip bones were not known. Measurements were taken in millimeters using a sliding digital vernier calliper. The mean and standard deviation of the acetabulum in various dimensions were calculated. Parameters of acetabulum depth and diameter were measured. Result: The overall goal of this study was to generate data that would be useful to the orthopaedics for geometric modelling. The study would also help the forensic experts. It would also be valuable for the anthropologists in their racial and population studies. The mean SD value of the depth of acetabulum on the right side is 27.121.02mm and on the left side is 27.021.03. The mean S.D. value of the diameter of the acetabulum on the right side is 47.501.27mm and on the left side is 47.451.33. Conclusion: Morphological study on adult hip bone is useful for anatomists, anthropologists, experts in forensic medicine and orthopaedics for performing surgical procedures in this area.

Functional adaptation after femoral intertrochanteric valgus osteotomy in Legg–Calvé–Perthes disease

Legg–Calvé–Perthes disease (LCPD) requires individualized treatment in order to regain a functional hip joint. In severe cases, in which a congruent joint cannot be achieved, other options are necessary in order to improve functionality and prevent early osteoarthritis. Therefore, we analysed the clinical and radiologic outcome of 28 patients after valgus osteotomy of the proximal femur (VOF). We examined the range of hip motion, functionality and health-related quality of life (HRQoL) via modified Harris Hip Score (mHHS) and Kidscreen-10. Radiographic analysis contained quantitative and qualitative measurements of hip morphology. In particular, we correlated the results with the change of the pelvic-femoral angle (PFA). PFA was defined as the angle between the anatomical diaphyseal line of the femur and a vertical line through the pelvis. The mean follow-up was 5.5 years. Patients showed high mHHS and good HRQoL postoperatively. An increase in ROM with an improvement of 30.5° abduction and 10.3° internal rotation was evident. PFA correlated with adduction contracture and improved significantly after surgery. In consideration of careful patient selection, VOF showed a positive effect on ROM, pain, HRQoL, radiographic congruence and outcome. We identified the age at surgery and an increasing adduction contracture—objectified by a decreased PFA—as a prognostic factor.

Open lift-drill-fill-fix for medial osteochondral lesions of the talus: surgical technique.

Osteochondral lesions of the talus (OLT) with afragment on the talar dome that fail conservative treatment and need surgical treatment can benefit from in situ fixation of the OLT. Advantages of fixation include the preservation of native cartilage, a high quality subchondral bone repair, and the restoration of the joint congruency by immediate fragment stabilization. To improve the chance of successful stabilization, adequate lesion exposure is critical, especially in difficult to reach lesions located on the posteromedial talar dome. In this study we describe the open Lift, Drill, Fill, Fix (LDFF) technique for medial osteochondral lesions of the talus with an osteochondral fragment. As such, the lesion can be seen as an intra-articular non-union that requires debridement, bone-grafting, stabilization, and compression. The LDFF procedure combines these needs with access through amedial distal tibial osteotomy. Symptomatic osteochondral lesion of the talus with afragment (≥ 10 mm diameter and ≥ 3 mm thick as per computed tomography [CT] scan) situated on the medial talar dome which failed 3-6months conservative treatment. Systemic disease, including active bacterial arthritis, hemophilic or other diffuse arthropathies, rheumatoid arthritis of the ankle joint, and malignancies. Neuropathic disease. End-stage ankle osteoarthritis or Kellgren and Lawrence score3 or4 [3]. Ipsilateral medial malleolus fracture less than 6months prior. Relative contra-indication: posttraumatic stiffness with range of motion (ROM) < 5°. Children with open physis: do not perform an osteotomy as stabilization of the osteotomy may lead to early closure of the physis, potentially resulting in symptomatic varus angulation of the distal tibia. In these cases only arthrotomy can be considered. The OLT is approached through amedial distal tibial osteotomy, for which the screws are predrilled and the osteotomy is made with an oscillating saw and finished with achisel in order to avoid thermal damage. Hereafter, the joint is inspected and the osteochondral fragment is identified. The cartilage is partially incised at the borders and the fragment is then lifted as ahood of amotor vehicle (lift). The subchondral bone is debrided and thereafter drilled to allow thorough bone marrow stimulation (drill) and filled with autologous cancellous bone graft from either the iliac crest or the distal tibia (fill). The fragment is then fixated (fix) in anatomical position, preferably with two screws to allow additional rotational stability. Finally, the osteotomy is reduced and fixated with two screws. Casting includes 5weeks of short leg cast non-weightbearing and 5weeks of short leg cast with weightbearing as tolerated. At 10-week follow-up, aCT scan is made to confirm fragment and osteotomy healing, and patients start personalized rehabilitation under the guidance of aphysical therapist.

Efficacy of supramalleolar osteotomy in the treatment of traumatic ankle joint varus deformity in adolescents

BackgroundSupramalleolar osteotomy (SMOT) has emerged as a valuable treatment for ankle varus deformity; however, there are fewer reports of treatment outcomes in adolescents. The purpose of this study was to investigate the radiologic and clinical outcomes of SMOT for the treatment of traumatic ankle joint varus deformity (TAVD) in adolescents.MethodsWe reviewed 32 adolescent cases who underwent SMOT between February 2017 and February 2022 for TAVD. Radiologic assessment included tibial anterior surface angle (TAS), talar tilt angle (TT), and tibial lateral surface angle (TLS) preoperatively and at 3 months and 12 months postoperatively, and clinical assessment was performed using American Orthopaedic Foot and Ankle Society (AOFAS) scores, Visual Analogue Scale (VAS) scores, and ankle dorsiflexion–plantarflexion ROM including preoperative and 6 months postoperative and 12 months postoperative.ResultsAll 32 patients were followed up completely with a mean follow-up of (20.3 ± 3.2) months. From the radiologic outcomes, the mean preoperative TAS improved from 61.53 ± 3.74 to 88 ± 1.72 at 12 months postoperatively, the mean preoperative TT decreased from 2.25 ± 1.32 to 0.5 ± 0.57 at 12 months postoperatively, the mean preoperative TLS improved from 76.72 ± 0.21 to 79.34 ± 1.52 at 12 months postoperatively, the differences between the above preoperative and 12 months postoperative radiologic outcomes were statistically significant (p < 0.05), the mean preoperative AOFAS score improved from 65.5 ± 9.40 to 92.34 ± 4.00 at 12 months postoperatively, the mean preoperative VAS score decreased from 2.44 ± 1.24 to 0.78 ± 0.75 at 12 months postoperatively, and the mean preoperative range of motion (ROM) of ankle improved from 50.16 ± 7.46 to 55.78 ± 4.77 at 12 months postoperatively. The differences between the above preoperative and 12 months postoperative clinical results were statistically significant (p < 0.05).ConclusionOur study demonstrated that SMOT was effective in correcting TAVD and significantly improving ankle function in adolescents, and that it is an efficient and successful method for restoring ankle joint congruence and normal hindfoot alignment.

Weight-Bearing Computed Tomography Evaluation of Acute SER4a Ankle Fractures

Category: Ankle; Trauma Introduction/Purpose: Recent studies have reported cadaveric and early clinical data regarding Weber B supination-external- rotation (SER)4a ankle fractures. SER4a ankle fractures have discordance of the medial clear space (MCS) between weight-bearing (WB) and gravity stress (GS) radiographs, showing instability on the GS view which normalizes with WB. Unfortunately, evaluation of the medial clear space only provides a two-dimensional evaluation of a three-dimensional structure. Prior cadaveric research has shown significant decreases in the tibiotalar joint contact area with only 1 mm of displacement of the talus. The purpose of this study is to utilize weight-bearing computed tomography (WBCT) to evaluate differences in the tibiotalar joint contact area and rotational alignment in patients with acute SER4a ankle fractures compared to their contralateral uninjured ankle. Methods: Adult patients presenting within ten days of injury with an isolated Weber B fibula fracture and a normal MCS ( &lt; 5 mm) on injury radiographs were evaluated with weight-bearing and gravity stress radiographs. Patients determined to have isolated Weber B SER4a ankle fractures (GS positive but WB negative radiographs) and no history of injury to the contralateral ankle were included. The ability to place equal weight on both extremities was confirmed by standing on side-by-side scales. WBCT scans were obtained of both the healthy and injured ankles. The images were evaluated using Disior Bonelogic (Paragon28, Helsinki, Finland) software to calculate the tibiotalar joint contact area, axial tibiotalar rotation, and talocrural angle. An a priori power analysis was performed with six patients needed. Results: Five out of ten patients have been enrolled in the study to date (3 females, 2 males, average age 52.4). Preliminary data show an average 4.3% (standard deviation (SD) 4.9) increase in tibiotalar joint contact area between the injured and uninjured extremity. The average difference in axial tibiotalar angle is 3.6 (SD 6.9) degrees of internal rotation of the injured ankle. The talocrural in the injured and uninjured extremity have an average difference of 0.062 (SD 1.8) degrees. Conclusion: This study provides the first in vivo evaluation of the joint contact area changes seen in SER4 ankle fractures. Although limited in sample size, the results demonstrate that SER4a ankle fractures do not have decreased tibiotalar joint contact area relative to the healthy, uninjured side. The trend towards increased surface area in the injured ankles is hypothesized to be a result of the increased reliance on joint congruency with injury to the fibula and deltoid.

Topography and Morphometrics of the Cartilage Surfaces in the Peritalar Joints

Category: Hindfoot; Ankle Introduction/Purpose: Recent studies have highlighted the important role of peritalar joint congruence in maintaining the alignment of the hindfoot. Peritalar subluxation is associated with a variety of pathological deformities including flatfoot, cavovarus foot, clubfoot, as well as foot and ankle stress fractures. To date, studies of peritalar joint congruence have all been performed using either XR, WBCT based direct measurements, or 3D segmentation and analysis. However, none of these techniques can demonstrate the cartilage location nor disruption, nor the exact location of the articulation on the bone surface. Data bias caused by the limitations of these study methodologies is therefore inevitable. This study used 3D surface mapping to assess morphometrics of the cartilage surfaces of the peritalar joints. Methods: 11 fresh-frozen cadaveric feet without trauma nor surgery or significant deformities were dissected to expose the calcaneus, cuboid, talus, and navicular bones, and the articular surfaces. Surface mapping of the articular surfaces and the two bones was completed using an Artec Space Spider 3D scanner and Mmics. Further digital analysis was completed using GeoMagic Studio 10. T-test was used for statistical comparisons, with p&lt; 0.05 as statistically significantly different. Results: Detailed information of the articular surfaces is summarized in Table 1. The average articular area on both sides of the joint matched each other well in the posterior facet of the subtalar joint (4% difference), and calcaneocuboid joint (3% difference) without significant statistical difference, but not in the anterior &amp; middle facets of the subtalar joint, nor the talonavicular joint. In the anterior &amp; middle facets of the subtalar joint, the cartilage articular area on the talar side was 124% of that on the calcaneus (p &lt; 0.05), and in the talonavicular joint the cartilage articular area on the navicular was 138% of that on the talus (p &lt; 0.05). Conclusion: The cartilage articular surfaces in certain peritalar joints do not match its opposing surface in size. In the talonavicular joint, it is easy to understand since area of the socket must be much smaller than that of the ball in order for the joint to glide and rotate. There must be functional reasons for this phenomenon to happen in the anterior and middle facets of the subtalar joint, which need further investigation. This study shows that the extent of subluxation of the peritalar joints may be physiological and should not necessarily be considered as pathological.

Three-Dimensional Printing of Models of Patellofemoral Joint Articular Cartilage in Patients With Patella Instability for Observing Joint Congruity

Three-dimensional (3D) modeling and printing are increasingly used in the field of orthopaedic surgery for both research and patient care. One area where they are particularly helpful is in improving our understanding of the patellofemoral (PF) joint. Heretofore, morphological studies that use 3D models of the PF joint have primarily been based on computed tomography imaging data and thus do not incorporate articular cartilage. Here, we describe a method for creating 3D models of the articular surfaces of the PF joint based on magnetic resonance imaging. Models created using this technique can be used to improve our understanding of the morphology of the articular surfaces of the PF joint and its relationship to joint pathologies. Of particular interest is our finding of articular congruity in printed articular cartilage surfaces of dysplastic PF joints of recurrent patella dislocators.

A study of the correlation between glenohumeral joint congruence and stability in recurrent shoulder dislocations

To investigate the correlation between glenohumeral joint congruence and stability in recurrent shoulder dislocations. Eighty-nine patients (89 sides) with recurrent shoulder dislocation admitted between June 2022 and June 2023 and met the selection criteria were included as study subjects. There were 36 males and 53 females with an average age of 44 years (range, 20-79 years). There were 40 cases of left shoulder and 49 cases of right shoulder. The shoulder joints dislocated 2-6 times, with an average of 3 times. The three-dimensional models of the humeral head and scapular glenoid were reconstructed using Mimics 20.0 software based on CT scanning images. The glenoid track (GT), inclusion index, chimerism index, fit index, and Hill-Sachs interval (HSI) were measured, and the degree of on/off track was judged (K value, the difference between HSI and GT). Multiple linear regression was used to analyze the correlation between the degree of on/off track (K value) and inclusion index, chimerism index, and fit index. Multiple linear regression analysis showed that the K value had no correlation with the inclusion index ( P>0.05), and was positively correlated with the chimerism index and the fit index ( P<0.05). Regression equation was K=-24.898+35.982×inclusion index+8.280×fit index, R 2=0.084. Humeral head and scapular glenoid bony area and curvature are associated with shoulder joint stability in recurrent shoulder dislocations. Increased humeral head bony area, decreased scapular glenoid bony area, increased humeral head curvature, and decreased scapular glenoid curvature are risk factors for glenohumeral joint stability.