Isoreticular Metal-organic Frameworks Research Articles

Zinc oxide nanorods incorporated magnetic isoreticular metal–organic framework for photodegradation of dyes

Cobalt magnetic isoreticular metal – organic framework (CoFe2O4-IRMOF-3) was prepared by facile solvothermal procedure. ZnO nanorods were assembled on the CoFe2O4-IRMOF-3 using a commercial ultrasonic homogenizer. The photocatalytic activity of ZnO-CoFe2O3-IRMOF-3 was investigated by photodegradation of two cationic dyes including methylene blue and rhodamin B. CoFe2O4 and ZnO nanorods were incorporated on the IRMOF-3 to improve the separation and photocatalytic activity of IRMOF-3 under visible light, respectively. The mesoporous nanocomposite was characterized by various techniques including transmission electron microscopy, scanning electron microscopy, energy dispersion x-ray, powder X-ray diffraction, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller, and ultraviolet-visible diffuse reflectance spectroscopy. The zeta potential of synthesized samples showed the surface of all materials was negative charge in the range of the pH experiment (pH 6.5). The results showed that the ZnO-CoFe2O3-IRMOF-3 had extremely degradation ability of MB and RhB molecule due to the synergetic effect between ZnO and CoFe2O4-IRMOF-3 in comparison with IRMOF-3 and CoFe2O4-IRMOF-3. The introduced ZnO on the surface of CoFe2O4-IRMOF-3 incremented degradation of dyes in the visible region and increased the transfer and separation of the generated charge on the contact area between ZnO and CoFe2O4-IRMOF-3. Furthermore, after five times recycling, the separation of ZnO-CoFe2O4-IRMOF-3 from liquid media using magnetic, the composite still showed high photodegradation ability.

Large pore isoreticular MOFs as tunable nanoreactors

Large pore isoreticular MOFs as tunable nanoreactors

Highly Efficient Removal of Neonicotinoid Insecticides by Thioether-Based (Multivariate) Metal-Organic Frameworks.

Circumventing the impact of agrochemicals on aquatic environments has become a necessity for health and ecological reasons. Herein, we report the use of a family of five eco-friendly water-stable isoreticular metal–organic frameworks (MOFs), prepared from amino acids, as adsorbents for the removal of neonicotinoid insecticides (thiamethoxam, clothianidin, imidacloprid, acetamiprid, and thiacloprid) from water. Among them, the three MOFs containing thioether-based residues show remarkable removal efficiency. In particular, the novel multivariate MOF {SrIICuII6[(S,S)-methox]1.5[(S,S)-Mecysmox]1.50(OH)2(H2O)}·36H2O (5), featuring narrow functional channels decorated with both −CH2SCH3 and −CH2CH2SCH3 thioalkyl chains—from l-methionine and l-methylcysteine amino acid-derived ligands, respectively—stands out and exhibits the higher removal efficiency, being capable to capture 100% of acetamiprid and thiacloprid in a single capture step under dynamic solid-phase extraction conditions—less than 30 s. Such unusual combination of outstanding efficiency, high stability in environmental conditions, and low-cost straightforward synthesis in 5 places this material among the most attractive adsorbents reported for the removal of this type of contaminants.

Ultrahigh Hydrogen Uptake in an Interpenetrated Zn 4 O-Based Metal–Organic Framework

As a highly promising candidate for hydrogen storage, crucial to vehicles powered by fuel cells, metal–organic frameworks (MOFs) have attracted the attention of chemists in recent decades. H2 uptak...

Fluorescent Detection of Carbon Disulfide by a Highly Emissive and Robust Isoreticular Series of Zr-Based Luminescent Metal Organic Frameworks (LMOFs)

Carbon disulfide (CS2) is a highly volatile neurotoxic species. It is known to cause atherosclerosis and coronary artery disease and contributes significantly to sulfur-based pollutants. Therefore, effective detection and capture of carbon disulfide represents an important aspect of research efforts for the protection of human and environmental health. In this study, we report the synthesis and characterization of two strongly luminescent and robust isoreticular metal organic frameworks (MOFs) Zr6(µ3-O)4(OH)8(tcbpe)2(H2O)4 (here termed 1) and Zr6(µ3-O)4(OH)8(tcbpe-f)2(H2O)4 (here termed 2) and their use as fluorescent sensors for the detection of carbon disulfide. Both MOFs demonstrate a calorimetric bathochromic shift in the optical bandgap and strong luminescence quenching upon exposure to carbon disulfide. The interactions between carbon disulfide and the frameworks are analyzed by in-situ infrared spectroscopy and computational modelling by density functional theory. These results reveal that both the Zr metal node and organic ligand act as the preferential binding sites and interact strongly with carbon disulfide.

Linker Expansion and Its Impact on Switchability in Pillared-Layer MOFs

Linker elongation is an important method to systematically adjust porosity and pore size in isoreticular MOFs. In flexible structures, this approach opens the possibility for the systematic analysis of the building blocks and their contribution to the overall flexible behavior enabling tuning of the framework responsivity toward molecular stimuli. In this work, we report two new compounds isoreticular to the highly flexible pillared layer structure DUT-8(Ni) ([Ni2(2,6-ndc)2(dabco)]n, 2,6-ndc = 2,6-naphthalenedicarboxylate, dabco = 1,4-diazabicylo[2.2.2]octane). Aromatic linker 2,6-ndc was substituted by longer carboxylic linkers, namely, 4,4'-biphenyldicarboxylate (4,4'-bpdc) and 4,4'-stilbenedicarboxylate (4,4'-sdc), while the dabco pillar was retained. The structural response of the new compounds toward the desolvation and adsorption of various fluids was studied using advanced in situ PXRD techniques, demonstrating distinct differences in the flexible behavior of three compounds and disclosing the impact of linker structure on the framework response. Theoretical calculations provide mechanistic insights and an energetic rationale for the pronounced differences in switchability observed. The energetics of linker bending and linker-linker dispersion interactions govern the phase transitions in investigated MOFs.

Analytical Approach to Screen Semiconducting MOFs Using Bloch Mode Analysis and Spectroscopic Measurements.

A rapid and simple analytical approach is developed to screen the semiconducting properties of metal organic frameworks (MOFs) by modeling the band structure and predicting the density of state of isoreticular MOFs (IRMOFs). One can consider the periodic arrangement of metal nodes linked by organic subunits as a 1D periodic array crystal model, which can be aligned with any unit-cell axis included in the IRMOF's primitive cubic lattice. In such a structure, each valence electron of a metal atom feels the potential field of the entire periodic array. We allocate the 1D periodic array in a crystal unit cell to three IRMOFs-n (n = 1, 8, and 10) of the Zn4O(L)3 IRMOF series and apply the model to their crystal lattices with unit-cell constants a = 25.66, 30.09, and 34.28 Å, respectively. By solving Schrödinger's equation with a Kronig-Penney periodic potential and fitting the computed energy spectra to IRMOFs' experimental spectroscopic data, we model electronic band structures and obtain densities of state. The band diagram of each IRMOF reveals the nature of its electronic structures and density of state, allowing one to identify its n- or p-type semiconducting behavior. This novel analytical approach serves as a predictive and rapid screening tool to search the MOF database to identify potential semiconducting MOFs.

New isoreticular phosphonate MOFs based on a tetratopic linker.

The tetratopic linker 1,1,2,2-tetrakis(4-phosphonophenyl)ethylene (H8TPPE) was used to synthesize the three new porous metal-organic frameworks of composition [M2(H2O)2(H2TPPE)]·xH2O (M = Al3+, Ga3+, Fe3+), denoted as M-CAU-53 under hydrothermal reaction conditions, using the corresponding metal nitrates as starting materials. The crystal structures of the compounds were determined ab initio from powder X-ray diffraction data, revealing small structural differences. Proton conductivity measurements were carried out, indicating different conductivity mechanisms. The differences in proton conductivity could be linked to the individual structures. In addition, a thorough characterization via thermogravimetry, elemental analysis, IR-spectroscopy as well as N2- and H2O-sorption is given.

Identifying the Bottleneck for Heat Transport in Metal–Organic Frameworks

AbstractControlling the transport of thermal energy is key to most applications of metal–organic frameworks (MOFs). Analyzing the evolution of the effective local temperature, the interfaces between the metal nodes and the organic linkers are identified as the primary bottlenecks for heat conduction. Consequently, changing the bonding strength at that node–linker interface and the mass of the metal atoms can be exploited to tune the thermal conductivity. This insight is generated employing molecular dynamics simulations in conjunction with advanced, ab initio parameterized force fields. The focus of the present study is on MOF‐5 as a prototypical example of an isoreticular MOF. However, the key findings prevail for different node structures and node–linker bonding chemistries. The presented results lay the foundation for developing detailed structure‐to‐property relationships for thermal transport in MOFs with the goal of devising strategies for the application‐specific optimization of heat conduction.

Pressure-induced phase transition of isoreticular MOFs: Mechanical instability due to ligand buckling

Since MOFs are often upon varied pressures in gas adsorption/desorption process, understanding the mechanical stability of these ultraporous frameworks becomes extremely crucial. In this paper, taking the isoreticular DUT material as an example, the relation between the mechanical stability of isoreticular MOFs and their ligands is investigated by real-time molecular dynamics simulations as well as three state of art computational approaches including Born stability criteria, anisotropy in elastic moduli and pressure-versus-volume equations. It is found that the global instability of DUT materials is driven by the local buckling of their ligand backbones. Inspired by this finding, we develop here a mechanical model based on three parameters including the topology constant, the elastic modulus of ligand and the ligand length. Through comparing to the results extracted from computational methods, it is found that our mechanical model is reliable in describing the critical transition pressure of various isoreticular MOF materials such as DUT and IRMOF materials. The mechanical model developed here not only provides a design criterion for isoreticular MOF crystals to modify their rigid/flexible properties, but also can be utilized to give a quick prediction of the critical transition pressure of isoreticular MOFs.

IRMOF‐8: Theoretical evaluation of aluminum doping on hydrogen, methane, and hydrogen sulfide adsorption

AbstractThe use of porous materials, aimed at increasing gas storage capacity at lower pressures, exploits physical adsorption and is an emerging strategy that is being widely investigated. In this scope, porous materials such as metal organic frameworks (MOFs) are a viable alternative, where structural modifications can enhance the properties of these materials and improve the degree of adsorption for a given gas. In this work, we evaluated the adsorption of methane, hydrogen, and hydrogen sulfide gases on pure isoreticular MOF (IRMOF)‐8 and aluminum‐doped IRMOF‐8 using density functional theory Perdew‐Burke‐Ernzerhof/DZVP and semiempirical AM1, PM3, PM6, PM6‐DH+, PM6‐DH2, PM6‐D3, and PM7 methods. Adsorption isotherms were calculated by means of Grand Canonical Monte Carlo simulations. It was found that doping did not provide a significant increase in the amount of adsorbed methane and hydrogen gases. Conversely, doping led to a considerable increase for hydrogen sulfide capture.

A Selenophene-Incorporated Metal-Organic Framework for Enhanced CO2 Uptake and Adsorption Selectivity.

A new metal–organic coordination polymer [Zn2(sedc)2(dabco)] (1se; sedc2− = selepophene-2,5-dicarboxylate; dabco = 1,4-diazabicyclo[2.2.2]octane) was synthesized and characterized by single-crystal X-ray diffraction analysis. This MOF is based on {Zn2(OOCR)4N2} paddle wheels and is isoreticular to the family of [Zn2(bdc)2(dabco)] derivatives (1b; bdc2− = 1,4-benzenedicarboxylate) with pcu topology. The gas adsorption measurements revealed that 1se shows a 15% higher CO2 volumetric uptake at 273 K and 28% higher CO2 uptake at 298 K (both at 1 bar) compared to the prototypic framework 1b. Methane and nitrogen adsorption at 273 K was also investigated, and IAST calculations demonstrated a pronounced increase in CO2/CH4 and CO2/N2 selectivity for 1se, compared with 1b. For example, the selectivity factor for the equimolar CO2/CH4 gas mixture at 1 bar = 15.1 for 1se and 11.9 for 1b. The obtained results show a remarkable effect of the presence of selenium atom on the carbon dioxide affinity in the isoreticular metal–organic frameworks with very similar geometry and porosity.

Effect of Larger Pore Size on the Sorption Properties of Isoreticular Metal-Organic Frameworks with High Number of Open Metal Sites.

Four isostructural CPO‐54‐M metal‐organic frameworks based on the larger organic linker 1,5‐dihydroxynaphthalene‐2,6‐dicarboxylic acid and divalent cations (M=Mn, Mg, Ni, Co) are shown to be isoreticular to the CPO‐27 (MOF‐74) materials. Desolvated CPO‐54‐Mn contains a very high concentration of open metal sites, which has a pronounced effect on the gas adsorption of N2, H2, CO2 and CO. Initial isosteric heats of adsorption are significantly higher than for MOFs without open metal sites and are slightly higher than for CPO‐27. The plateau of high heat of adsorption decreases earlier in CPO‐54‐Mn as a function of loading per mole than in CPO‐27‐Mn. Cluster and periodic density functional theory based calculations of the adsorbate structures and energetics show that the larger adsorption energy at low loadings, when only open metal sites are occupied, is mainly due to larger contribution of dispersive interactions for the materials with the larger, more electron rich bridging ligand.

Nitrogen-doped carbon quantum dots conjugated isoreticular metal-organic framework-3 particles based luminescent probe for selective sensing of trinitrotoluene explosive.

Amine group-containing isoreticular metal-organic framework (IRMOF-3) particles are utilized for the first time as a trinitrotoluene (TNT) sensing material. IRMOF-3 particles are synthesized using zinc nitrate as a metal precursor and 2-amino-1,4-benzenedicarboxylic acid as a linker. The nitrogen-doped carbon quantum dots (NCQDs) are synthesized from citric acid and ethylenediamine as carbon and nitrogen precursor, respectively. The NCQDs are conjugated with IRMOF-3 particles as IRMOF-3/NCQDs. The TEM micrograph revealed the average size of IRMOF-3 particles to be 363.66nm. The photoluminescence emission intensity of IRMOF-3 particles at λem 430nm is highly increased in the presence of NCQDs (λex 330nm). Both the as-synthesized IRMOF-3 and IRMOF-3/NCQD particles are explored for TNT detection to compare the effect of NCQDs on the IRMOF-3 particle surface. Lower limit of detection (7.5 × 10-8M) and higher Stern-Volmer constant (4.46 × 106M-1) are achieved by IRMOF-3/NCQD particles. The association constant also increased from 5.3 × 104 to 2.78 × 106M-1 after the conjugation of IRMOF-3 particles with NCQDs. Moreover, enhanced selectivity for TNT over trinitrophenol is achieved using the IRMOF-3/NCQD particles. Graphical Abstract.

Mesoporous Silica Encapsulated Metal-Organic Frameworks for Heterogeneous Catalysis

Encapsulation of metal-organic frameworks (MOFs) with a shell of mesoporous silica can boost overall performance of MOFs, offering versatility for synthetic architecture of integrated nanocatalysts with reactor-like features. Recently, Yu et al. report a green approach to make yolk-shell nanoreactors.

Molecular simulation on the stability and adsorption properties of choline-based ionic liquids/IRMOF-1 hybrid composite for selective H2S/CO2 capture

The compatibility and performance of an Isoreticular Metal-Organic Frameworks (IRMOF-1) impregnated with choline-based ionic liquids (ILs) for selective adsorption of H2S/CO2, were studied by molecular dynamics (MD) simulation. Cholinium alanate ([Chl][Ala]) was nominated as the suitable IL for impregnation into IRMOF-1, consistent with the low RMSD values (0.546 nm, 0.670 nm, 0.776 nm) at three IL/IRMOF-1 w/w ratios (WIL/IRMOF-1 = 0.4, 0.8, and 1.2). The [Chl]+ and [Ala]− ion pair was located preferentially around the carboxylate group within the IRMOF-1 framework, with the latter interacting strongly with the host than the [Chl]+. Results of radius of gyration (Rg) and root mean square displacement (RMSD) revealed that a ratio of 0.4 w/w of IL/IRMOF-1 (Rg = 1.405 nm; RMSD = 0.546 nm) gave the best conformation to afford an exceptionally stable IL/IRMOF-1 composite. It was discovered that the IL/IRMOF-1 composite was more effective in capturing H2S and CO2 compared to pristine IRMOF-1. The gases adsorbed in higher quantities in the IL/IRMOF-1 composite phase compared to the bulk phase, with a preferential adsorption for H2S, as shown by the uppermost values of adsorption (AH2S = 17.954 mol L−1 bar-1) and an adsorption selectivity (ASH2S/CO2 = 43.159) at 35 IL loading.

Metal Organic Frameworks as Drug Targeting Delivery Vehicles in the Treatment of Cancer.

In recent years, metal organic frameworks (MOFs) have been widely developed as vehicles for the effective delivery of drugs to tumor tissues. Due to the high loading capacity and excellent biocompatibility of MOFs, they provide an unprecedented opportunity for the treatment of cancer. However, drugs which are commonly used to treat cancer often cause side effects in normal tissue accumulation. Therefore, the strategy of drug targeting delivery based on MOFs has excellent research significance. Here, we introduce several intelligent targeted drug delivery systems based on MOFs and their characteristics as drug-loading systems, and the challenges of MOFs are discussed. This article covers the following types of MOFs: Isoreticular Metal Organic Frameworks (IRMOFs), Materials of Institute Lavoisier (MILs), Zeolitic Imidazolate Frameworks (ZIFs), University of Oslo (UiOs), and MOFs-based core-shell structures. Generally, MOFs can be reasonably controlled at the nanometer size to effectively achieve passive targeting. In addition, different ligands can be modified on MOFs for active or physicochemical targeting. On the one hand, the targeting strategy can improve the concentration of the drugs at the tumor site to improve the efficacy, on the other hand, it can avoid the release of the drugs in normal tissues to improve safety. Despite the challenges of clinical application of MOFs, MOFs have a number of advantages as a kind of smart delivery vehicle, which offer possibilities for clinical applications.

Fabrications of metal organic frameworks derived hierarchical porous carbon on carbon nanotubes as efficient bioanode catalysts of NAD+-dependent alcohol dehydrogenase

Herein, we developed an efficient anode catalyst for alcohol biofuel cell by integrating multi-walled carbon nanotubes (MWCNTs) into an isoreticular metal organic framework derived porous carbon. The derived porous carbon (PC) intercalated by MWCNTs (PC/MWCNTs) serviced as the anode component in catalyzing the electrooxidation of reduced β-Nicotinamide adenine dinucleotide (NADH), enabling catalysis to ethanol electrooxidation by alcohol dehydrogenase with NAD+ as both free coenzyme and electron transfer mediators (onset potential, 0.14 V vs. SCE, pH 8.0). Hierarchy of PC/MWCNTs with micro-, meso-, and macropores provides improved immobilization of electroactive enzymes, aids the facile transportations of electrolyte and increases the conductivity and specific surface areas of anode and results in a much higher catalytic current density for NADH (1.17 mA cm−2 for 10 mM NADH, pH 9.0) and alcohol bioanode (maximum steady-state current density, 0.25 ± 0.03 mA cm−2, pH 8.0) than its singular component analogues (PC and MWCNTs). The high Michaelis-Menten constant (166 ± 16.8 mM) favorites the detection of ethanol at high concentrations. The linear range of ethanol is 10–300 mM, with the sensitivity and detection limit as 24 nA mM−1 and 3 mM. The study applies porous carbon nanomaterials as both electrocatalysts for coenzyme and scaffolds for enzymes, benefiting to feasible constructions of bioelectrodes with notable current densities.

Molecular Dynamic Simulation on the Stability of Corporated Metal Organic Framework and Choline Based Ionic Liquids

A compatibility and stability of Isoreticular Metal Organic Framework (IRMOF-1) impregnated with choline based ionic liquids (ILs) are studied by molecular dynamic simulation. Among three proposed IL/IRMOF-1 hybrid composites, cholinium formate, ([Chl][Fm]) is nominated as the best IL to be incorporated with IRMOF-1 since it shows the lowest RMSD value (0.502 nm, 0.637 nm, 0.923 nm) at three IL/IRMOF-1 w/w ratio (0.4%, 0.8% and 1.2%) respectively and become representative to all three ILs. Oxygen atom in the bridging carboxyl group shows the most flexible atom through RMSF analysis since it shows the highest fluctuation (1.001 nm) at WIL/IRMOF-1 = 0.4%. The RDF shows that the interaction between [Chl]+ and [Fm]− is higher in composite phase compare to bulky phase due to confinement effect of IRMOF-1. Both [Chl]+ and [Fm]− seem to be preferred to locate around carboxylate group inside the IRMOF-1 whereby [Fm]− shows the dominant interaction and strongly interacts with IRMOF-1 compared to [Chl]+. In terms of mobility, the cation shows high mobility with SDF value of 0.0419 nm2 in which mobility is expected to be increased with increasing of ILs ratio (0.4%, 0.8% and 1.2%) respectively. Intensity of the ions population around IRMOF-1 is interpreted by density map which is in agreement with the RDF analysis. Finally, the stability of the IRMOF-1 is confirmed by the radius of gyration (Rg) analysis in which 0.4% ILs shows the most stable conformation with the lowest Rg value = 1.667 nm that is in consistent with the RMSD analysis. Overall, the structural stability of IRMOF-1 is well interpreted and impregnation of ILs literally increase the stability of framework at lower IL/IRMOF-1 w/w ratio.

A Comparison of Two Isoreticular Metal–Organic Frameworks with Cationic and Neutral Skeletons: Stability, Mechanism, and Catalytic Activity

AbstractAlthough many ionic metal–organic frameworks (MOFs) have been reported, little is known about how the charge of the skeleton affects the properties of the MOF materials. Herein we report how the chemical stability of MOFs can be substantially improved through embedding electrostatic interactions in structure. A MOF with a cationic skeleton is impervious to extremely acidic, oxidative, reductive, and high ionic strength conditions, such as 12 m HCl (301 days), aqua regia (86 days), H2O2 (30 days), and seawater (30 days), which is unprecedented for MOFs. DFT calculations suggested that steric hinderance and the repulsive interaction of the cationic framework toward positively charged species in microenvironments protects the vulnerable bonds in the structure. Diverse functionalities can be bestowed by substituting the counterions of the charged framework with identically charged functional species, which broadens the horizon in the design of MOFs adaptable to a demanding environment with specific functionalities.