Isoreticular Metal-organic Frameworks Research Articles

Quasi-Discrete Pore Engineering via Ligand Racemization in Metal-Organic Frameworks for Thermodynamic-Kinetic Synergistic Separation of Propylene and Propane.

The adsorptive separation of propylene and propane offers an energy-efficient alternative to the conventional cryogenic distillation technology. However, developing porous adsorbents with both high equilibrium and kinetic selectivity remains extremely challenging due to the similar size and physical properties of these gases. Herein, this work reports a ligand racemization strategy to construct quasi-discrete pores in MOFs for a synergistically enhanced thermodynamic and kinetic separation performance. The use of enantiopure l-malic acid versus racemic dl-malic acid as ligands afforded isoreticular Ni-based MOFs with contrasting one-dimensional channels (l-mal-MOF) and quasi-discrete cavities connected by small windows (dl-mal-MOF). The periodic pore constrictions in dl-mal-MOF significantly increased the differentiation in diffusion rates and binding energies between propylene and propane. dl-mal-MOF exhibited an exceptional propylene uptake of 1.82 mmol/g at 0.05 bar and 298 K along with an ultrahigh equilibrium-kinetic combined selectivity of 62.6. DFT calculations and MD simulations provided insights into the synergistic mechanism of preferential propylene adsorption and diffusion. Breakthrough column experiments demonstrated the excellent separation and high-purity recovery of propylene over propane on dl-mal-MOF. The robust stability and facile regeneration highlight its potential for propylene purification applications.

Effect of Ligand Aromaticity on Cyclohexane and Benzene Sorption in IRMOFs: A Computational Study.

A series of four isoreticular MOFs (IRMOF-1, -10, -14, and -16) were selected for a computational investigation of the effect of ligand aromaticity on the adsorption capacity of an aromatic VOC (benzene) compared to its nonaromatic analog (cyclohexane). The affinity of the adsorbates was evaluated by calculating Henry's constants and adsorption enthalpies. It has been evidenced that while KH values decrease with ligand elongation (IRMOF-10 and -16), inserting a pyrene core into the MOF structure (IRMOF-14) increases both the cyclohexane and benzene adsorption efficiency by ∼290 and 54%, respectively. To elucidate host-guest interactions, we sought to locate preferential adsorption sites in MOF structures for the two VOCs studied by using the GCMC method. It appears that benzene interacts with the metal center (Zn4O clusters) and most of the ligand while cyclohexane tends to localize preferentially only near the Zn4O clusters. Coadsorption isotherms (equimolar mixture of benzene and cyclohexane) demonstrated the preferential adsorption of cyclohexane due to the stronger affinity for the MOF structure. On the other hand, for other isoreticular structures, the ligand elongation leads to a shift of the adsorption curve of cyclohexane caused by pore size increase and therefore less interactions with the walls. This phenomenon is counterbalanced in the case of IRMOF-14 due to stronger interactions between the cyclohexane and pyrene groups. The present results thus open perspectives in the design of promising MOF candidates for high-performing separation and sorption/detection of hydrocarbon VOCs.

Shaping the Water-Harvesting Behavior of Metal-Organic Frameworks Aided by Fine-Tuned GPT Models.

We construct a data set of metal-organic framework (MOF) linkers and employ a fine-tuned GPT assistant to propose MOF linker designs by mutating and modifying the existing linker structures. This strategy allows the GPT model to learn the intricate language of chemistry in molecular representations, thereby achieving an enhanced accuracy in generating linker structures compared with its base models. Aiming to highlight the significance of linker design strategies in advancing the discovery of water-harvesting MOFs, we conducted a systematic MOF variant expansion upon state-of-the-art MOF-303 utilizing a multidimensional approach that integrates linker extension with multivariate tuning strategies. We synthesized a series of isoreticular aluminum MOFs, termed Long-Arm MOFs (LAMOF-1 to LAMOF-10), featuring linkers that bear various combinations of heteroatoms in their five-membered ring moiety, replacing pyrazole with either thiophene, furan, or thiazole rings or a combination of two. Beyond their consistent and robust architecture, as demonstrated by permanent porosity and thermal stability, the LAMOF series offers a generalizable synthesis strategy. Importantly, these 10 LAMOFs establish new benchmarks for water uptake (up to 0.64 g g-1) and operational humidity ranges (between 13 and 53%), thereby expanding the diversity of water-harvesting MOFs.

Isoreticular Metal-Organic Frameworks Confined Mononuclear Ru-Hydrides Enable Highly Efficient Shape-Selective Hydrogenolysis of Polyolefins.

Upcycling nonbiodegradable plastics such as polyolefins is paramount due to their ever-increasing demand and landfills after usage. Catalytic hydrogenolysis is highly appealing to convert polyolefins into targeted value-added products under mild reaction conditions compared with other methods, such as high-temperature incineration and pyrolysis. We have developed three isoreticular zirconium UiO-metal-organic frameworks (UiO-MOFs) node-supported ruthenium dihydrides (UiO-RuH2), which are efficient heterogeneous catalysts for hydrogenolysis of polyethylene at 200 °C, affording liquid hydrocarbons with a narrow distribution and excellent selectivity via shape-selective catalysis. UiO-66-RuH2 catalyzed hydrogenolysis of single-use low-density polyethylene (LDPE) produced a C12 centered narrow bell-shaped distribution of C8-C16 alkanes in >80% yield and 90% selectivity in the liquid phase. By tuning the pore sizes of the isoreticular UiO-RuH2 MOF catalysts, the distribution of the products could be systematically altered, affording different fuel-grade liquid hydrocarbons from LDPE in high yields. Our spectroscopic and theoretical studies and control experiments reveal that UiO-RuH2 catalysts enable highly efficient upcycling of plastic wastes under mild conditions owing to their unique combination of coordinatively unsaturated single-site Ru-active sites, uniform and tunable pores, well-defined porous structure, and superior stability. The kinetics and theoretical calculations also identify the C-C bond scission involving β-alkyl transfer as the turnover-limiting step.

Three Robust Isoreticular Metal-Organic Frameworks with High-Performance Selective CO2 Capture and Separation.

Based on the hard-soft acid base (HSAB) theory, three robust isoreticular metal-organic frameworks (MOFs) with nia topology were successfully synthesized by solvothermal reaction {[In3O(BHB)(H2O)3]NO3·3DMA (JLU-MOF110(In)), [Fe3O(BHB)(H2O)3]NO3 (JLU-MOF110(Fe)), and [Fe2NiO(BHB)(H2O)3] (JLU-MOF110(FeNi)) (DMA = N,N-dimethylacetamide, H6BHB = 4,4″-benzene-1,3,5-triyl-hexabenzoic acid)}. Both JLU-MOF110(In) and JLU-MOF110(Fe) are cationic frameworks, and their BET surface areas are 301 and 446 m2/g, respectively. By modification of the components of metal clusters, JLU-MOF110(FeNi) features a neutral framework, and the BET surface area is increased up to 808 m2/g. All three MOF materials exhibit high chemical and thermal stability. JLU-MOF110(In) remains stable for 24 h at pH values ranging from 1 to 11, while JLU-MOF110(Fe) and JLU-MOF110(FeNi) persist to be stable for 24 h at pH from 1 to 12. JLU-MOF110(In) exhibits thermal stability up to 350 °C, whereas JLU-MOF110(Fe) and JLU-MOF(FeNi) can be stable up to 300 °C. Thanks to the microporous cage-based structure and abundant open metal sites, JLU-MOF110(In), JLU-MOF110(Fe), and JLU-MOF110(FeNi) have excellent CO2 capture capacity (28.0, 51.5, and 99.6 cm3/g, respectively, under 298 K and 1 bar). Interestingly, the ideal adsorption solution theory results show that all three MOFs exhibit high separation selectivity toward CO2 over N2 (35.2, 43.2, and 43.2 for CO2/N2 = 0.15/0.85) and CO2 over CH4 (14.4, 11.5, and 10.1 for CO2/CH4 = 0.5/0.5) at 298 K and 1 bar. Thus, all three MOFs are potential candidates for CO2 capture and separation. Among them, JLU-MOF110(FeNi) displays the best separation potential, as revealed by dynamic column breakthrough experiments.

Storage and Diffusion of Carbon Dioxide in the Metal Organic Framework MOF-5─A Semi-empirical Molecular Dynamics Study.

Metal-organic frameworks (MOFs) have attracted increasing attention due to their high porosity for exceptional gas storage applications. MOF-5 belongs to the family of isoreticular MOFs (IRMOFs) and consists of Zn4O6+ clusters linked by 1,4-benzenedicarboxylate. Due to the large number of atoms in the unit cell, molecular dynamics simulation based on density functional theory has proved to be too demanding, while force field models are often inadequate to model complex host-guest interactions. To overcome this limitation, an alternative semi-empirical approach using a set of approximations and extensive parametrization of interactions called density functional tight binding (DFTB) was applied in this work to study CO2 in the MOF-5 host. Calculations of pristine MOF-5 yield very good agreement with experimental data in terms of X-ray diffraction patterns as well as mechanical properties, such as the negative thermal expansion coefficient and the bulk modulus. In addition, different loadings of CO2 were introduced, and the associated self-diffusion coefficients and activation energies were investigated. The results show very good agreement with those of other experimental and theoretical investigations. This study provides detailed insights into the capability of semi-empirical DFTB-based molecular dynamics simulations of these challenging guest@host systems. Based on the comparison of the guest-guest pair distributions observed inside the MOF host and the corresponding gas-phase reference, a liquid-like structure of CO2 can be deduced upon storage in the host material.

Electrochromism in Isoreticular Metal-Organic Framework Thin Films with Record High Coloration Efficiency.

The power of isoreticular chemistry has been widely exploited to engineer metal-organic frameworks (MOFs) with fascinating molecular sieving and storage properties but is underexplored for designing MOFs with tunable optoelectronic properties. Herein, three dipyrazole-terminated XDIs (X = PM (pyromellitic), N (naphthalene), or P (perylene); DI = diimide) with different lengths and electronic properties are prepared and employed as linkers for the construction of an isoreticular series of Zn-XDI MOFs with distinct electrochromism. The MOFs are grown on fluorine-doped tin oxide (FTO) as high-quality crystalline thin films and characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Due to the constituting electronically isolated XDI linkers, each member of the isoreticular thin film series exhibits two reversible one-electron redox events, each at a distinct electrochemical potential. The orientation of the MOFs as thin films as well as their isoreticular nature results in identical cation-coupled electron hopping transport rates in all three materials, as demonstrated by comparable apparent electron diffusion coefficients, Deapp. Upon electrochemical reduction to either the [XDI]•- or [XDI]2- state, each MOF undergoes characteristic changes in its optical properties as a function of linker length and redox state of the linker. Operando spectroelectrochemistry measurements reveal that Zn-PDI@FTO (PDI = perylene diimide) thin films exhibit a record high coloration efficiency of 941 cm2 C-1 at 746 nm, which is attributed to the maximized Faradaic transformations at each electronically isolated PDI unit. The electrochromic response of the thin film is retained to more than 99% over 100 reduction-oxidation cycles, demonstrating the applicability of the presented materials.

Face-directed assembly of tailored isoreticular MOFs using centring structure-directing agents

Building blocks with low connectivity and no embedded directionality are prone to polymorphism, as demonstrated by the diversity of 4-connected zeolitic nets (>250). As a result, their deployment for design in reticular and isoreticular chemistries remains a challenge. However, the ability to control geometrical peculiarities offers potential to deviate from the assembly of default structures. Here we report the face-directed assembly of >20 isoreticular zeolite-like metal–organic frameworks (ZMOFs) by using polytopic expanding and tightening centring structure-directing agents (cSDAs). The cSDAs are selected with the appropriate geometrical coding information to alter and control the orientation of adjacent supermolecular building blocks. The ZMOFs have an underlying sodalite (sod) topology that is remarkably suited for the rational assembly of multinary materials. In addition to a variety of metal cations (In, Fe, Co and Ni), a diverse range of cSDAs (di-, tri-, tetra-, hexa-, pyridyl or imidazole) are used and combined. Our approach enables isoreticular possibilities at both extremities of the porous materials spectrum: In-sod-ZMOF-102 exhibits small pore aperture suitable for efficient separation, while Fe-sod-ZMOF-320 with 48-Å-wide mesopores exhibits high hydrogen uptake, methane storage working capacity and a high gravimetric working capacity for oxygen.

Role of Transition Metals in Metal-Organic Frameworks as Nanoporous Ion Emitters for Thermal Ionization Mass Spectrometry.

Thermal ionization mass spectrometry is a powerful analytical technique that allows for precise determination of isotopic ratios. Analysis of low abundance samples, however, can be limited by the ionization efficiency. Following an investigation into a new type of metal-organic hybrid material, nanoporous ion emitters (nano-PIEs), devised to promote the emission of analyte ions and reduce traditional sample loading challenges, this work evaluates the impact that changing the metal in the material has on the ionization of uranium (U). Being derived from metal-organic frameworks (MOFs), nano-PIEs inherit the tunability of their parent MOFs. The MOF-74 series has been well studied for probing the impact various framework metals (i.e., Mg, Mn, Co, Ni, Cu, Zn, and Cd) have on material properties, and thus, a series of nano-PIEs with different metals were derived from this isoreticular MOF series. Trends in ionization efficiency were studied as a function of ionization potential, volatility, and work function of the framework metals to gain a better understanding of the mechanism of analyte ionization. This study finds a correlation between the analyte ionization efficiency and nano-PIE framework metal volatility that is attributed to its tunable thermal stability and degradation behavior.

Selectivity Control in the Direct CO Esterification over Pd@UiO-66: The Pd Location Matters.

The selectivity control of Pd nanoparticles (NPs) in the direct CO esterification with methyl nitrite toward dimethyl oxalate (DMO) or dimethyl carbonate (DMC) remains a grand challenge. Herein, Pd NPs are incorporated into isoreticular metal-organic frameworks (MOFs), namely UiO-66-X (X=-H, -NO2 , -NH2 ), affording Pd@UiO-66-X, which unexpectedly exhibit high selectivity (up to 99 %) to DMC and regulated activity in the direct CO esterification. In sharp contrast, the Pd NPs supported on the MOF, yielding Pd/UiO-66, displays high selectivity (89 %) to DMO as always reported with Pd NPs. Both experimental and DFT calculation results prove that the Pd location relative to UiO-66 gives rise to discriminated microenvironment of different amounts of interface between Zr-oxo clusters and Pd NPs in Pd@UiO-66 and Pd/UiO-66, resulting in their distinctly different selectivity. This is an unprecedented finding on the production of DMC by Pd NPs, which was previously achieved by Pd(II) only, in the direct CO esterification.

One-Pot Synthesis of MOF@MOF: Structural Incompatibility Leads to Core-Shell Structure and Adaptability Control Makes the Sequence.

Core-shell metal-organic frameworks (MOF@MOF) are promising materials with sophisticated structures that cannot only enhance the properties of MOFs but also endow them with new functions. The growth of isotopic lcore-shell MOFs is mostly limited to inconvenient stepwise seeding strategies with strict requirements, and by far one-pot synthesis is still of great challenge due to the interference of different components. Through two pairs of isoreticular MOFs, it reveals that the structural incompatibility is a prerequisite for the formation of MOFs@MOFs by one-pot synthesis, as illustrated by PMOF-3@HHU-9. It further unveils that the adaptability of the shell-MOF is a more key factor for nucleation kinetic control. MOFs with flexible linkers has comparably slower nucleation than MOFs with rigid linkers (forming PMOF-3@NJU-Bai21), and structural-flexible MOFs built by flexible linkers show the lowest nucleation and the most adaptability (affording NJU-Bai21@HHU-9). This degree of adaptability variation controls the sequence and further facilitates the synthesis of a first triple-layered core-shell MOF (PMOF-3@NJU-Bai21@HHU-9) by one-pot synthesis. The insight gained from this study will aid in the rational design and synthesis of other multi-shelled structures by one-pot synthesis and the further expansion of their applications.

Characterization of chitosan/eugenol-loaded IRMOF-3 nanoparticles composite films with sustained antibacterial activity and their application in postharvest preservation of strawberries

In this work, we prepared chitosan/eugenol-loaded IRMOF-3 nanoparticles (CS/IRMOF-3-EU) composite films using (0, 2, 4, and 6 wt%) isoreticular metal-organic framework (IRMOF-3) nanoparticles loaded with eugenol (IRMOF-3-EU), co-blended with chitosan to develop environmentally friendly food packaging materials with sustained antimicrobial activity. The microstructure and physicochemical properties of the composite films were investigated. The addition of IRMOF-3-EU to the CS matrix significantly enhanced the UV-blocking property and elongation at the break of the composite films; the CS/IRMOF-3-EU composite films inherited the antioxidant and antibacterial properties of eugenol (EU), and the DPPH radical scavenging ability was increased to 53.8% with the addition of 6% IRMOF-3-EU, while it showed excellent antibacterial ability; in addition, the CS/IRMOF-3-EU composite films achieved the sustainable release of eugenol to achieve the long-lasting antibacterial effect. Experiments on strawberry preservation applications showed that the CS/IRMOF-3-EU films slowed down the deterioration of strawberry quality, delayed the decline of hardness, effectively suppressed weight loss, H2O2 content, and malondialdehyde content, and delayed the decline of catalase activity and peroxidase activity. It showed that the CS/IRMOF-3-EU composite films could be used to maintain the postharvest quality and prolong the shelf life of strawberries.

Isoreticular Contraction of Metal-Organic Frameworks Induced by Cleavage of Covalent Bonds.

Isoreticular chemistry, in which the organic or inorganic moieties of reticular materials can be replaced without destroying their underlying nets, is a key concept for synthesizing new porous molecular materials and for tuning or functionalization of their pores. Here, we report that the rational cleavage of covalent bonds in a metal-organic framework (MOF) can trigger their isoreticular contraction, without the need for any additional organic linkers. We began by synthesizing two novel MOFs based on the MIL-142 family, (In)BCN-20B and (Sc)BCN-20C, which include cleavable as well as noncleavable organic linkers. Next, we selectively and quantitatively broke their cleavable linkers, demonstrating that various dynamic chemical and structural processes occur within these structures to drive the formation of isoreticular contracted MOFs. Thus, the contraction involves breaking of a covalent bond, subsequent breaking of a coordination bond, and finally, formation of a new coordination bond supported by structural behavior. Remarkably, given that the single-crystal character of the parent MOF is retained throughout the entire transformation, we were able to monitor the contraction by single-crystal X-ray diffraction.

Pore size effect of zirconium-based metal-organic frameworks for encapsulation and release of volatile monoterpenes

In this work the sorption properties of three isoreticular Zr-based MOFs, viz., UiO-66, UiO-67, and UiO-68 as adsorbents of active organics were examined and especially the pore size effects are discussed using d-limonene, myrcene, α-terpinene, and α-pinene as probe molecules. Results indicated that the terpene uptake and release are highly dependent on both the MOF pore size and the geometric feature of guest molecules themselves. The shape selective property of UiO-66 holds for the tested terpenes, where the adsorption capacity of d-limonene, myrcene, and α-terpinene in equilibrium with the liquid phase (0.43–0.46 g g−1) was approximately 5-times larger than that of α-pinene with 0.56 nm kinetic diameter (0.09 g g−1). The narrow triangular apertures of UiO-66 act as the permeation-limiting barrier for guest molecules with the dimension close to the pore size. Except for α-pinene, the loading fraction for other terpenes decreased with an increase in the MOF pore diameter. For example, the uptake of UiO-66, UiO-67, and UiO-68 for myrcene reached up to 90 %, 81 %, and 76 % of their theoretical maximum loading, respectively. Differential scanning calorimetry revealed that the melting point of both d-limonene and α-terpinene confined in the 0.71 nm pores of UiO-67 shifts to a higher temperature relative to that in the bulk phase. In contrast, no obvious phase transition was observed for the terpene composites with either UiO-66 or UiO-68 (0.94 nm pore size) under identical conditions. Consistent with the thermal analysis results, the monoterpenes entrapped in the UiO-67 showed a much lower release rate than their counterparts in the other two frameworks.

On the role of history-dependent adsorbate distribution and metastable states in switchable mesoporous metal-organic frameworks

A unique feature of metal-organic frameworks (MOFs) in contrast to rigid nanoporous materials is their structural switchabilty offering a wide range of functionality for sustainable energy storage, separation and sensing applications. This has initiated a series of experimental and theoretical studies predominantly aiming at understanding the thermodynamic conditions to transform and release gas, but the nature of sorption-induced switching transitions remains poorly understood. Here we report experimental evidence for fluid metastability and history-dependent states during sorption triggering the structural change of the framework and leading to the counterintuitive phenomenon of negative gas adsorption (NGA) in flexible MOFs. Preparation of two isoreticular MOFs differing by structural flexibility and performing direct in situ diffusion studies aided by in situ X-ray diffraction, scanning electron microscopy and computational modelling, allowed assessment of n-butane molecular dynamics, phase state, and the framework response to obtain a microscopic picture for each step of the sorption process.

Exploring the Role of Amino Acid-Derived Multivariate Metal-Organic Frameworks as Catalysts in Hemiketalization Reactions.

Understanding the host-guest chemistry in MOFs represents a research field with outstanding potential to develop in a rational manner novel porous materials with improved performances in fields such as heterogeneous catalysis. Herein, we report a family of three isoreticular MOFs derived from amino acids and study the influence of the number and nature of functional groups decorating the channels as a catalyst in hemiketalization reactions. In particular, a multivariate (MTV) MOF 3, prepared by using equal percentages of amino acids L-serine and L-mecysteine, in comparison to single-component ("traditional") MOFs, derived from either L-serine or L-mecysteine (MOFs 1 and 2), exhibits the most efficient catalytic conversions for the hemiketalization of different aldehydes and ketalization of cyclohexanone. On the basis of the experimental data reported, the good catalytic performance of MTV-MOF 3 is attributed to the intrinsic heterogeneity of MTV-MOFs. These results highlight the potential of MTV-MOFs as strong candidates to mimic natural nonacidic enzymes, such as glycosidases, and to unveil novel catalytic mechanisms not so easily accessible with other microporous materials.

Highly improved pH-Responsive anticancer drug delivery and T2-Weighted MRI imaging by magnetic MOF CuBTC-based nano/microcomposite.

Cu-BTC framework has received a considerable attention in recent years as a drug carrier candidate for cancer treatment due to its unique structural properties and promising biocompatibility. However, its intrinsic deficiency for medical imaging potentially limits its bioapplications; To address this subject, a magnetic nano/microscale MOF has been successfully fabricated by introducing Fe3O4 nanoparticles as an imaging agent into the porous isoreticular MOF [Cu3(BTC)2] as a drug carrier. The synthesized magnetic MOFs exhibits a high loading capacity (40.5%) toward the model anticancer DOX with an excellent pH-responsive drug release. The proposed nanocomposite not only possesses large surface area, high magnetic response, large mesopore volume, high transverse relaxivity (r 2) and good stability but also exhibits superior biocompatibility, specific tumor cellular uptake, and significant cancer cell viability inhibitory effect without any targeting agent. It is expected that the synthesized magnetic nano/microcomposite may be used for clinical purposes and can also serve as a platform for photoactive antibacterial therapy ae well as pH/GSH/photo-triple-responsive nanocarrier.

Stability and chaotic dynamic analysis of Li-doped fullerene-IRMOF composite materials for hydrogen storage

Isoreticular metal organic framework (IRMOF) material is a type of ideal hydrogen storage material for its porosity and large surface area. Lithium doping and fullerene impregnation can enhance the hydrogen storage capacity of IRMOF efficiently. In this paper, the nonlinear dynamic characteristics of Li-doped fullerene-IRMOF composite material are qualitatively discussed in theory, which determine its thermal stability. A type of Li-doped fullerene-IRMOF composite material is proposed for hydrogen storage, and a new constitutive model is proposed to describe the hysteretic property of IRMOF. The system's nonlinear dynamic model is developed, and the fast-slow dynamic analysis method is introduced to interpret not only the system's jumping phenomena between the multi-pulse homoclinic and heteroclinic orbits but also its chaotic dynamics. The nonlinear dynamic responses of the system under deterministic and stochastic excitation are obtained respectively, and symmetrical and asymmetric orbital fusion phenomena have been discovered. The results of theoretical analysis and numerical simulation both show that the system has novel nonlinear dynamic characteristics such as double periodic motion, multi-pulse jumping orbits, and chaos; multi-pulse jumping phenomena are caused by the stiffness difference between fullerene and IRMOF, which form a fast-slow system; symmetrical fusion and asymmetrical fusion of system's orbits occur under different parameters. Safe, efficient and rapid hydrogen storage and release can be achieved through controlling the system's parameters to adjust the dynamic behavior of the system, which will be a development direction in the application of hydrogen energy.

Synthesis, Crystal Structure, and Photocatalytic Properties of Two Isoreticular Ce(IV)-MOFs with an Infinite Rod-Shaped Inorganic Building Unit.

The use of the V-shaped linker molecules 4,4'-oxydibenzoic acid (H2ODB) and 4,4'-carbonyldibenzoic acid (H2CDB) led to the discovery of two isoreticular Ce(IV)-based metal-organic frameworks (MOFs) of composition [CeO(H2O)(L)], L = ODB2-, CDB2-, denoted CAU-58 (CAU = Christian-Albrechts-University). The recently developed Ce-MOF synthesis approach in acetonitrile as the solvent proved effective in accessing Ce(IV)-MOF structures with infinite rod-shaped inorganic building units (IBUs) and circumventing the formation of the predominantly observed hexanuclear [Ce6O8] cluster. For the structure determination of the isoreticular MOFs, three-dimensional electron diffraction (3D ED) and powder X-ray diffraction (PXRD) data were used in combination with density functional theory (DFT) calculations. [CeO(H2O)(CDB)] shows reversible H2O adsorption by stirring in water and thermal treatment at 190 °C, which leads to a unit cell volume change of 11%. The MOFs feature high thermal stabilities (T > 290 °C), which exceed those of most Ce(IV)-MOFs and can be attributed to the infinite rod-shaped IBU. Surface and bulk oxidation states of the cerium ions were analyzed via X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge spectroscopy (XANES). While Ce(III) ions are observed by the highly surface-sensitive XPS method, the bulk material contains predominantly Ce(IV) ions according to XANES. Application of the MOFs as catalysts for the catalytic degradation of methyl orange in aqueous solutions was also studied. While degradation activity for both MOFs was observed, only CAU-58-ODB revealed enhanced photocatalytic activity under ultraviolet (UV) light. The photocatalytic mechanism likely involves a ligand-to-metal charge transfer (LMCT) from the linkers to the Ce(IV) centers. Analyses by XANES and inductively coupled plasma-optical emission spectroscopy (ICP-OES) demonstrate that leaching of Cerium ions as well as partial reduction of Ce(IV) to Ce(III) takes place during catalysis. At the same time, PXRD data confirm the structural stability of the remaining MOF catalysts.

An ultramicroporous pillar-layer metal-organic framework for high sieving separation of ethylene from ethane

Developing new techniques and materials for ethylene (C2H4) and ethane (C2H6) separation is an industrially significant but challenging task. Here we report two isoreticular pillar-layer metal-organic frameworks, Co(aip)(bpy)0.5 and Co(aip)(pyz)0.5, for the separation of C2H4/C2H6. The pore apertures of the pillar-layer metal-organic frameworks are rationally controlled by changing the length of the pillar ligands. Significantly, Co(aip)(pyz)0.5 with a shorter pillar ligand shows reduced pore size and molecular sieving separation of C2H4 from C2H6. Co(aip)(pyz)0.5 has a moderate C2H4 capacity of 1.78 mmol/g but ultrahigh C2H4/C2H6 selectivity exceeding 2000 at ambient conditions. The molecular simulation revealed that large torsion angle between the organic linker plane and Co–O bond leads to the high energy barrier for C2H6 to enter into the pore, which results in the molecular sieving separation of C2H4/C2H6. Dynamic breakthrough experiments confirmed the high selectivity of Co(aip)(pyz)0.5 for C2H4. And high-purity C2H4 (>97%) with a C2H4 productivity of 19.1 l/kg can be obtained through the desorption process. Meanwhile, the excellent reusability and moisture stability endow it great potential for applications in adsorptive separation.