Isopropyl Substituents Research Articles

Site-Isolated Main-Group Tris(2-pyridyl)borate Complexes by Pyridine Substitution and Their Ring-Opening Polymerization Catalysis

Tris(2-pyridyl)borates are an emerging class of scorpionate ligands, distinguished as exceptionally robust and electron-donating. However, the rapid formation of inert homoleptic complexes with divalent metals has so far limited their catalytic utility. We report site-isolating tris(2-pyridyl)borate ligands, bearing isopropyl, tert-butyl, and mesityl substituents at the pyridine 6-position to suppress the formation of inert homoleptic complexes. These ligands form the first 1:1 complexes between tris(2-pyridyl)borates and Mg2+, Zn2+, or Ca2+, with isopropyl-substituted TpyiPrH showing the most generality. Single-crystal X-ray diffraction analysis of the resulting complexes and comparison to density functional theory (DFT) models showed geometric distortions driven by steric repulsion between the pyridine 6-substituents and the hexamethyldisilazide (HMDS-, -N(SiMe3)2) anion. We show that this steric profile is a feature of the six-membered pyridine ring and contrasts with more established tris(pyrazolyl)borate and tris(imidazoline)borate scorpionate complexes. TpyiPrMg(HMDS) (1) and its zinc analogue are moderately active for the controlled polymerization of l-lactide, ε-caprolactone, and trimethylene carbonate. Furthermore, 1 gives controlled polymerization under more demanding melt-phase polymerization conditions at 100 °C, and block copolymerization of ε-caprolactone and trimethylene carbonate. These results will enable useful catalysis and coordination chemistry studies with tris(2-pyridyl)borates, and characterizes their structural complementarity to more familiar scorpionate ligands.

Single-crystal-to-single-crystal phase transition of 18β-glycyrrhetinic acid isopropyl ester.

Due to the destruction of the integrity of the parent crystal, single-crystal-to-single-crystal phase transition in organic compounds is still a relatively rare phenomenon. The phase transition in glycyrrhetinic acid isopropyl ester is triggered by temperature change. The increasing volume of the isopropyl substituent as a result of increasing temperature forces a remodelling of the structural motifs. These changes cause a single-crystal-to-single-crystal phase transition. The low-temperature form is isostructural with glycyrrhetinic acid methanol solvate, while the high-temperature phase is isostructural with the ethyl ester of this acid.

Stereoselective Synthesis and Anticancer Activity of 2,6-Disubstituted trans-3-Methylidenetetrahydropyran-4-ones.

In this report, we present efficient and stereoselective syntheses of 2,6-disubstituted trans-3-methylidenetetrahydropyran-4-ones and 2-(4-methoxyphenyl)-5-methylidenetetrahydropyran-4-one that significantly broaden the spectrum of the available methylidenetetrahydropyran-4-ones with various substitution patterns. Target compounds were obtained using Horner–Wadsworth–Emmons methodology for the introduction of methylidene group onto the pyranone ring. 3-Diethoxyphosphoryltetrahydropyran-4-ones, which were key intermediates in this synthesis, were prepared by fully or highly stereoselective addition of Gilman or Grignard reagents to 3-diethoxyphosphoryldihydropyran-4-ones. Addition occurred preferentially by axial attack of the Michael donors on the dihydropyranone ring. Relative configurations and conformations of the obtained adducts were assigned using a detailed analysis of the NMR spectra. The obtained methylidenepyran-4-ones were evaluated for cytotoxic activity against two cancer cell lines (HL-60 and MCF-7). 2,6-Disubstituted 3-methylidenetetrahydropyran-4-ones with isopropyl and phenyl substituents in position 2 were more cytotoxic than analogs with n-butyl substituent. Two of the most cytotoxic analogs were then selected for further investigation on the HL-60 cell line. Both analogs induced morphological changes characteristic of apoptosis in cancer cells, significantly inhibited proliferation and induced apoptotic cell death. Both compounds also generated DNA damage, and one of the analogs arrested the cell cycle of HL-60 cells in the G2/M phase. In addition, both analogs were able to inhibit the activity of topoisomerase IIα. Based on these findings, the investigated analogs may be further optimized for the development of new and effective topoisomerase II inhibitors.

On-surface polyarylene synthesis by cycloaromatization of isopropyl substituents

Immobilization of organic molecules on metal surfaces and their coupling via thermally induced C–C bond formation is an important technique in organic and polymer synthesis. Using this approach, insoluble and reactive carbon nanostructures can be synthesized and the reactions monitored in situ using scanning probe microscopy methods. The diversity of conceivable products, however, is limited by the number and variety of known on-surface reactions. Here, we introduce the on-surface synthesis of polyarylenes by intermolecular oxidative coupling of isopropyl substituents of arenes. This [3+3] dimerization reaction forms a new phenylene ring and can be regarded as a formal cycloaromatization. The synthetic value of this reaction is proved by the synthesis of polyarylenes and co-polyarylenes, which we demonstrate by synthesizing poly(2,7-pyrenylene-1,4-phenylene). Scanning tunnelling microscopy and non-contact atomic force microscopy studies, complemented by density functional theory calculations, offer mechanistic insight into the on-surface cycloaromatization reaction. On-surface methods can be used to synthesize organic molecules, polymers and nanomaterials, however, the diversity of conceivable products is limited by the number of known on-surface reactions. Now, a phenylene ring-forming reaction on a gold surface by intermolecular oxidative coupling of isopropyl substituents on arenes is reported. The reaction is probed using bond-resolved imaging and computational modelling.

Green polymer synthesis and low dielectric properties obtained by oxidative polymerization of thymol with CuCl-2-(p-tolyl)pyridine catalyst

Polymerization of thymol (2-isopropyl-5-methylphenol) was conducted using a bulky copper catalyst (CuCl-2-(p-tolyl)pyridine) in toluene under dioxygen atmosphere to give the corresponding 1,4-coupled polythymol (PPETh) with the Mn up to 22.7 kDa in moderate yield. The OH absorption in the IR spectrum disappeared almost completely and the presence of only nine signals in the 13C NMR spectrum clearly indicated the satisfactory formation of the expected linear PPETh. The PPETh exhibited good solubility in tetrahydrofuran, N,N-dimethylformamide, 1,4-dioxane, and CHCl3 (well-known for preparing industrial PPE26 from oxidative polymerization of 2,6-dimethylphenol), and good thermostability (Td5 in N2 of 410 °C). PPETh was mixed with PPE26 and the tough films were successfully prepared by the hot-press method in the weight fraction of PPETh up to 60%. TMA and DMA were performed to evaluate the Tg and the CTE of the films at 179–222 °C and 82–130 ppm/K, respectively. The dielectric properties were measured using a cavity resonator, in which the relative permittivity ranged from 2.28 (PPETh60%) to 2.46 (PPE26), and the dissipation factor from 0.00173 (PPE26) to 0.00495 (PPETh60%) at 10 GHz. The bulky isopropyl substituent gave to the PPETh polymer good solubility and insulating property with maintained thermal stability.

Antitumor Effects of Ir(III)-2H-Indazole Complexes for Triple Negative Breast Cancer.

In this work, we have synthesized a series of novel C,N-cyclometalated 2H-indazole-ruthenium(II) and -iridium(III) complexes with varying substituents (H, CH3, isopropyl, and CF3) in the R4 position of the phenyl ring of the 2H-indazole chelating ligand. All of the complexes were characterized by 1H, 13C, high-resolution mass spectrometry, and elemental analysis. The methyl-substituted 2H-indazole-Ir(III) complex was further characterized by single-crystal X-ray analysis. The cytotoxic activity of new ruthenium(II) and iridium(III) compounds has been evaluated in a panel of triple negative breast cancer (TNBC) cell lines (MDA-MB-231 and MDA-MB-468) and colon cancer cell line HCT-116 to investigate their structure-activity relationships. Most of these new complexes have shown appreciable activity, comparable to or significantly better than that of cisplatin in TNBC cell lines. R4 substitution of the phenyl ring of the 2H-indazole ligand with methyl and isopropyl substituents showed increased potency in ruthenium(II) and iridium(III) complexes compared to that of their parent compounds in all cell lines. These novel transition metal-based complexes exhibited high specificity toward cancer cells by inducing alterations in the metabolism and proliferation of cancer cells. In general, iridium complexes are more active than the corresponding ruthenium complexes. The new Ir(III)-2H-indazole complex with an isopropyl substituent induced mitochondrial damage by generating large amounts of reactive oxygen species (ROS), which triggered mitochondrion-mediated apoptosis in TNBC cell line MDA-MB-468. Moreover, this complex also induced G2/M phase cell cycle arrest and inhibited cellular migration of TNBC cells. Our findings reveal the key roles of the novel C-N-cyclometalated 2H-indazole-Ir(III) complex to specifically induce toxicity in cancer cell lines through contributing effects of ROS-induced mitochondrial disruption along with chromosomal and mitochondrial DNA target inhibition.

Reactions of a Bis(pentalene)dititanium complex with alkenes; the molecular structure of the butadiene complex [Ti2(µ: η5,η5-Pn††)2(μ: η2,η2-s-trans-C4H6)] (Pn†† = 1,4-(SiiPr3)2-C8H4)

Reaction of the syn-bimetallic complex [Ti2(µ:η5,η5-Pn††)2] (1) (Pn†† = 1,4-(SiiPr3)2-C8H4) with 1,3-trans-butadiene in toluene results in the clean formation of the 1:1 adduct [Ti2(µ:η5,η5-Pn††)2(μ: η2,η2-s-trans-C4H6)] (2) featuring an essentially planar butadiene ligand. Complex (2) represents the first example of a bimetallic early transition metal complex where a coordinated butadiene adopts such a conformation. When (1) is reacted with propene an unexpected “tuck-over” alkene π-complex (3) is formed with co-current loss of propane. Complex (3) features a coordinated η2,η1 vinylic (H2C = CMe)-SiiPr2-Pn† moiety as a result of CH activation of one of the isopropyl substituents of the SiiPr3 groups on the Pn†† supporting ligand. One of the hydrogens of this secondary vinylic moiety is significantly shifted upfield in the 1H NMR spectrum of (3) and a single crystal XRD study shows an interaction between this hydrogen and one of the Ti centres. Preliminary kinetic studies of the formation of (3) show a slightly negative entropy of activation and 1st order consumption of (1) both of which suggest the involvement of a Ti-H(iPr) agostic interaction during the cyclometallation reaction.

Computational Investigation of the Formation of Substituted Isoindole N-Oxides through the Photo-oxidative Cyclization of 2'-Alkynylacetophenone Oximes.

Our recently published joint experiment-theory study of the photo-oxidative intramolecular cyclization of 2'-alkynylacetophenone oximes, performed in collaboration with the de Lijser group, presented the first reported formation of isoindole N-oxides. That study focused on determining a mechanistic explanation for the unexpected chemistry observed when three 2'-alkynylacetophenone oximes were photo-oxidized with 9,10-dicyanoanthracene (DCA), specifically the derivatives with a phenyl, isopropyl, or n-butyl substituent at the alkynyl group. Here, we use density functional theory to develop a broader understanding of the scope of this chemistry. In particular, we demonstrate that substituents on the alkynyl group and on the central benzene ring can significantly modulate the thermodynamic driving force for oxime radical cation generation when DCA is used as the photosensitizer. In contrast, substituents are shown to have a small impact on the chemical reactivity of the radical cation intermediates. In particular, 5-exo radical cation cyclization, which ultimately results in an isoindole N-oxide product, is always kinetically and sometimes also thermodynamically preferred over 6-endo radical cation cyclization, which would produce an isoquinoline N-oxide product. Overall, this study provides mechanistic insights into the diversity of isoindole N-oxides that can be produced through the photo-oxidative cyclization of 2'-alkynylacetophenone oximes.

NSSN-Type Group 4 Metal Complexes in the Ring-Opening Polymerization of l-Lactide.

A new class of zirconium and hafnium complexes coordinated by linear dianonic tetradentate NSSN ligands is reported. The ligands feature two amide functions coupled with two thioether groups linked by a central flexible ethane bridge and two lateral rigid phenylene bridges and differ for the substituents on the aniline nitrogen atoms, i.e., isopropyl, cyclohexyl, or mesityl substituents: NSSN-iPr, NSSN-Cy, or NSSN-Mes. They were prepared by reacting 2-aminothiophenol with dibromoethane to afford the NSSN ligands without substituents on the aniline nitrogen atoms, which were subsequently alkylated through a reductive amination of acetone or cyclohexanone or palladium-catalyzed cross-coupling reaction with mesityl bromide. The corresponding zirconium and hafnium complexes 1-5 were obtained through a transamination reaction between the neutral ligands and Zr(NMe2)4 or Hf(NMe2)4 [(NSSN-iPr)Zr(NMe2)2 (1), (NSSN-Cy)Zr(NMe2)2 (2), (NSSN-Mes)Zr(NMe2)2 (3), (NSSN-iPr)Hf(NMe2)2 (4), and (NSSN-Cy)Hf(NMe2)2 (5)]. They were characterized in solution by NMR spectroscopy and in solid state by X-ray diffraction analysis (except for 3). All complexes present an octahedral coordination geometry with a fac-fac ligand wrapping and a cis relationship between the other two monodentate ligands. The catalytic performances of 1-5 in the ring-opening polymerization of cyclic esters were investigated. Complex 1 was the most active: its polymerization activity was superior to those generally displayed by zirconium complexes featuring OSSO ligands and compared well with those of the most active group 4 complexes operating in a toluene solution.

14-Electron Rh and Ir silylphosphine complexes and their catalytic activity in alkene functionalization with hydrosilanes.

Herein we report an experimental and computational study of a family of four coordinated 14-electron complexes of Rh(iii) devoid of agostic interactions. The complexes [X-Rh(κ3(P,Si,Si)PhP(o-C6H4CH2SiiPr2)2], where X = Cl (Rh-1), Br (Rh-2), I (Rh-3), OTf (Rh-4), Cl·GaCl3 (Rh-5); derive from a bis(silyl)-o-tolylphosphine with isopropyl substituents on the Si atoms. All five complexes display a sawhorse geometry around Rh and exhibit similar spectroscopic and structural properties. The catalytic activity of these complexes and [Cl-Ir(κ3(P,Si,Si)PhP(o-C6H4CH2SiiPr2)2], Ir-1, in styrene and aliphatic alkene functionalizations with hydrosilanes is disclosed. We show that Rh-1 catalyzes effectively the dehydrogenative silylation of styrene with Et3SiH in toluene while it leads to hydrosilylation products in acetonitrile. Rh-1 is an excellent catalyst in the sequential isomerization/hydrosilylation of terminal and remote aliphatic alkenes with Et3SiH including hexene isomers, leading efficiently and selectively to the terminal anti-Markonikov hydrosilylation product in all cases. With aliphatic alkenes, no hydrogenation products are observed. Conversely, catalysis of the same hexene isomers by Ir-1 renders allyl silanes, the tandem isomerization/dehydrogenative silylation products. A mechanistic proposal is made to explain the catalysis with these M(iii) complexes.

Eelectrochemical Evaluation of Self-assembled Monolayers of N-Heterocyclic Carbenes on Gold and DFT Studies

Three N-heterocyclic carbenes (NHCs) are synthesized and their self-assembled monolayers (SAMs) are built up on gold substrate. Electrochemical impedance spectroscopy (EIS) tests show that the NHC-based SAMs exhibit high stability in 0.1 M HCl solution, and the loss of NHC molecules on gold surface is less than 3% after immersion of 32 h. The unsaturated level of heterocyclic moiety has a negligible effect on the stability of NHC-SAMs, which is attributed to the special bonding mechanism between NHCs and gold atom. Theoretical calculations reveal that the bonding of NHC molecule is dominantly contributed by the interaction of the d orbital of gold atom with the molecular orbitals mainly distributing on carbene carbon atom of NHC, such as HOMO-1 (σ1) and HOMO-2 (π1), and the σ-type interaction accounts for the main state of bonding in comparison to the π-type one. Those molecular orbitals distributing on heterocyclic moiety nearly take no part in the bonding, and the interaction of isopropyl substituents on N atoms with gold surface is not observed in this study. In addition, it is confirmed that EIS measurement can both sensitively and quantitatively examine the adsorption and desorption of SAMs on gold surface.

Peculiarities of three-component cyclization of ethyl 4,4,4-trifluoroacetoacetate and 1,2-ethanediamines with 3-methylbutan-2-one

The peculiarities of the three-component cyclization of ethyl 4,4,4-trifluoroacetoacetate and 1,2-ethanediamines with 3-methylbutan-2-one into hexahydroimidazo[1,2-a]pyridin-5-ones were studied. The reactions proceeded under mild conditions. The use of methyl ketone with a bulky isopropyl substituent increased the stereoselectivity of the transformations, but the reaction with 1,2-diaminopropane was accompanied by the formation 4-[(1-ammoniopropan-2-yl)amino]-1,1,1-trifluoro-4-oxobut-2-en-2-olate as a by-product.

Zinc(II) azadipyrromethene complexes substituted at the distal phenyl rings – Structure and spectroscopical properties

Four novel zinc(II) azadipyrromethene complexes, bearing hydroxyl, 2-(morpholin-4-yl)ethoxy, (dimethylamino)ethoxy and isopropyl substituents, were obtained. The complexes were thoroughly characterized by UV–Vis spectrophotometry, mass spectrometry and NMR spectroscopy. The UV–vis spectra of the complexes show two main bands – a broad band with a maximum at around 600 nm and another band in the UV region; the spectra are not significantly affected by the type of substituents present. The complexes are non-emissive. Additionally, studies of crystal structures of two complexes have revealed that the azadipyrromethene cores are virtually isostructural.

Lipophilicity trends upon fluorination of isopropyl, cyclopropyl and 3-oxetanyl groups.

A systematic comparison of lipophilicity modulations upon fluorination of isopropyl, cyclopropyl and 3-oxetanyl substituents, at a single carbon atom, is provided using directly comparable, and easily accessible model compounds. In addition, comparison with relevant linear chain derivatives is provided, as well as lipophilicity changes occurring upon chain extension of acyclic precursors to give cyclopropyl containing compounds. For the compounds investigated, fluorination of the isopropyl substituent led to larger lipophilicity modulation compared to fluorination of the cyclopropyl substituent.

Synthesis and Antitumor Activity Evaluation of Cyclometalated 2H-Indazole Ruthenium(II) and Iridium(III) Complexes.

In this work, a series of novel C-N cyclometalated 2H-indazole Ru(II) and Ir(III) complexes were synthesized, wherein chelating ligands with substituents like H, and isopropyl group in the R4 position of the phenyl ring of the 2H-indazole chelating ligand are present. The cytotoxicity of Ru(II) and Ir(III) complexes has been evaluated against different human cancer cell lines (HeLa, MCF-7, and A549) in a concentration-dependent manner. The new iridium complex with isopropyl substituent in the phenyl ring of the 2H-indazole moiety showed good cytotoxic activity against MCF-7 cells with an IC50 value 3.5 μM. The complex also exhibited cytotoxicity comparable to that of cisplatin. The ability of this compound inducing apoptosis was tested by nuclear condensation, cell membrane blebbing and caspase 3/7 activation. Further, this iridium complex is capable of inhibiting cancer cell migration when tested in MCF-7 cell line. Subsequently, we have studied the DNA binding and protein binding ability of the newly synthesized iridium complex.

Dinuclear Gold(I) Complexes Bearing Alkyl-Bridged Bis(N-heterocyclic carbene) Ligands as Catalysts for Carboxylative Cyclization of Propargylamine: Synthesis, Structure, and Kinetic and Mechanistic Comparison to the Mononuclear Complex [Au(IPr)Cl

Eight new dinuclear gold(I) complexes, [Au-2(L)X-2] (1-8), were synthesized using a straightforward synthetic procedure under very mild conditions. The complexes have been characterized by NMR spectroscopy, elemental analysis, and single-crystal X-ray structure analysis. Their catalytic activity was investigated in the carboxylative cyclization of propargylamine (PPA). A superior performance in comparison to [Au(IPr)Cl] (9) was obtained for complexes 1 and 2 having an eight-methylene bridge connecting two NHCs with an arene bearing an isopropyl substituent for X = Cl, Br. This prompted more detailed kinetic and mechanistic studies by FTIR comparing dinuclear complex 2 of X = Cl to complex 9. Fortuitously the FTIR studies allowed monitoring of the formation of the products carbamic acid (CA) and carbamate salt (CS), as well as a key cyclized intermediate first discovered by Ikariya. These data allow additional insight into the mechanism as well as the central role which may be played by Au(I) carbamate formation as a higher energy resting state present in the catalytic cycle. The crystal structures of four of the new complexes and a detailed computational study relevant to the role of carbamic acid (CA) and carbamates in the catalytic cycle are also reported.

Modeling the Reaction of Carboxylic Acids and Isonitriles in a Self-Assembled Capsule.

Quantum chemical calculations were used to study the reaction of carboxylic acids with isonitriles inside a resorcinarene‐based self‐assembled capsule. Experimentally, it has been shown that the reactions between p‐tolylacetic acid and n‐butyl isonitrile or isopropyl isonitrile behave differently in the presence of the capsule compared both with each other and also with their solution counterparts. Herein, the reasons for these divergent behaviors are addressed by comparing the detailed energy profiles for the reactions of the two isonitriles inside and outside the capsule. An energy decomposition analysis was conducted to quantify the different factors affecting the reactivity. The calculations reproduce the experimental findings very well. Thus, encapsulation leads to lowering of the energy barrier for the first step of the reaction, the concerted α‐addition and proton transfer, which in solution is rate‐determining, and this explains the rate acceleration observed in the presence of the capsule. The barrier for the final step of the reaction, the 1,3 O→N acyl transfer, is calculated to be higher with the isopropyl substituent inside the capsule compared with n‐butyl. With the isopropyl substituent, the transition state and the product of this step are significantly shorter than the preceding intermediate, and this results in energetically unfavorable empty spaces inside the capsule, which cause a higher barrier. With the n‐butyl substituent, on the other hand, the carbon chain can untwine and hence uphold an appropriate guest length.

Synthesis of indole inhibitors of silent information regulator 1 (SIRT1), and their evaluation as cytotoxic agents

A series of achiral indole analogues of the selective sirtuin inhibitor EX-527 (a racemic, substituted 1,2,3,4 tetrahydrocarbazole) was designed to stabilize the bioactive conformation, and synthesized. These new indoles were evaluated against the isolated sirtuin enzymes SIRT1 and SIRT2, and against a panel of nine human cell lines. Structure-activity relationship studies demonstrated the influence of the substituent at position 3 of the indole. The most potent SIRT1 inhibitor 3h, bearing an isopropyl substituent, was as potent as EX-527, and more selective for SIRT1 over SIRT2. Compound 3g, bearing a benzyl substituent, inhibited both sirtuins at micromolar concentration and was more cytotoxic than EX-527 on several cancer cell lines.

Crystal Engineering of 1D Exciton Systems Composed of Single‐ and Double‐Stranded Perylene Bisimide J‐Aggregates

AbstractSingle crystals of three at bay area tetraphenoxy‐substituted perylene bisimide dyes are grown by vacuum sublimation. X‐ray analysis reveals the self‐assembly of these highly twisted perylene bisimides (PBIs) in the solid state via imide–imide hydrogen bonding into hydrogen‐bonded PBI chains. The crystallographic insights disclose that the conformation and sterical congestion imparted by the phenoxy substituents can be controlled by ortho‐substituents. Accordingly, whilst sterically less demanding methyl and isopropyl substituents afford double‐stranded PBI chains of complementary P and M atropo‐enantiomers, single hydrogen‐bonded chains of homochiral PBIs are observed for the sterically more demanding ortho‐phenyl substituents. Investigation of the absorption and fluorescence properties of microcrystals and thin films of these PBIs allow for an unambiguous interpretation of these exciton systems. Thus, the J‐aggregates of the double‐stranded crystals exhibit a much larger (negative) exciton coupling than the single‐stranded one, which in contrast has the higher solid‐state fluorescence quantum yield.

Thermostable α-Diimine Nickel Complexes with Substituents on Acenaphthequinone-backbone for Ethylene Polymerization

In order to promote the thermostability of α-diimine nickel complex by ligand backbone structure, a series of α-diimine nickel complexes with substituents on acenaphthequinone backbone were synthesized and used as catalysts for ethylene polymerization. When the hydroxyethyl phenoxyl group was introduced to the acenaphthequinone-backbone, the thermal stability and activity of the catalyst could be significantly improved. The catalytic activity of complex C2 [5-(4-(2-hydroxyethyl)phenoxyl)-N,N-bis(2,6-diisopropyl)acenaphthylene-1,2-diimine]nickel(II) dibromide with isopropyl substituents on N-aryl reached 8.2 × 106 g/(molNi·h) at 70 °C and 2 MPa. The activity of [5-(4-(2-hydroxyethyl)phenoxyl)-N,N-bis(2,6-dibenzhydryl-4-menthylphenyl)acenaphthylene-1,2-diimine]nickel(II) dibromide (C3) still maintained at 6.7 × 105 g/(molNi·h) at 120 °C. Compared with C3 containing bulky dibenzhydryl substituents, the activity of C2 was sensitive to the change of the polymerization pressure. However, the polyethylenes obtained from complex C3 had lower branching density. Meanwhile, the molecular weight could reach 971 kg/mol, which is almost 5 times as much as that of the polyethylene obtained from complex C2.