Ionic Liquid-based Electrolyte Research Articles

High-performance flexible planner device featuring WS2 electrode and non-aqueous polymeric ionic electrolytes incorporated with ionic liquid and dual redox additives

Introducing redox-active species to enhance redox-activity at electrode–electrolyte interfaces, and designing the rational architecture of flexible supercapacitors comprising high-performance active materials and electrolytes with a wide potential window would be a key strategy to boost energy and power density. Herein, for the first time, we prepared an ionic liquid-based polymer electrolyte (IL/PE) by entrapping ionic liquid N-methyl-N-butyl pyrrolidinium bis (trifluoromethane sulfonyl) imide (P14TFSI)) in a polymer electrolyte Poly (diallyl dimethylammonium bis (trifluoromethane sulfonyl) imide (PDADMATFSI)) and blended with dual redox-additives (potassium iodide, KI and diphenylamine, DPA). The IL/PE with dual redox additives, demonstrates spectacular flexibility, high ionic conductivity (∼23.8 × 10−4 S cm−1), and stability in a wide potential window (∼5.9 V). A symmetrical interdigitated planner device is fabricated using dual redox-active IL/PE and flower-like WS2 electrode material. Benefiting from the synergistic effect of dual redox-active additive, the highest energy density of 47.86 µWh cm−2 at a power density of 3509 µW cm−2, and a high working potential (3 V) with excellent cycling stability upto 20,000 cycles has been achieved.

A Comprehensive Review of Novel Emerging Electrolytes for Supercapacitors: Aqueous and Organic Electrolytes Versus Ionic Liquid-Based Electrolytes

A Comprehensive Review of Novel Emerging Electrolytes for Supercapacitors: Aqueous and Organic Electrolytes Versus Ionic Liquid-Based Electrolytes

The influence of trihaloacetic acids on the hydrogen sorption properties of palladium nanoparticles-modified AB5 alloy in aprotic ionic liquid: Towards ionic liquid-based electrolytes for hydride batteries

Binary mixtures of acetic acid/trihaloacetic acids with aprotic ionic liquid – 1-ethyl-3-methylimidazolium methanesulfonate ([EMIM][MS]) are used as electrolytes for hydrogen electrosorption measurements. Preliminary studies are performed with palladium limited volume electrode to determine optimum concentration of the acid additives for hydrogen capacity and physicochemical properties of the electrolytes. The results obtained for trichloro- and tribromoacetic acid indicate that their decarboxylation occurs after mixing with [EMIM][MS] and dissolution of palladium is observed in contact with the decomposed electrolyte. Research on hydrogen capacity of palladium nanoparticles-modified AB5-type alloy is performed in mixtures of acetic acid and trifluoroacetic acid of optimum concentration. The best electrochemical performance is demonstrated by 2 M acetic acid/[EMIM][MS] mixture. The determined value of specific capacity of the investigated hydrogen absorbing material reaches 230 mAh g−1 and is close to that previously obtained from aqueous solutions of acids or bases.

Unravelling solvation structure and interfacial mechanism of pyrrolidinium-based ionic liquid electrolytes in potassium-ion batteries

Ionic liquid-based electrolytes (ILEs) show great potential in mitigating the dissolution of organic electrode materials as well as manipulating the interfacial electrochemistry for long lifespan of potassium-ion batteries (PIBs). Herein, KFSI/Pyr13FSI ILEs with varying K+ and Pyr13+ ratios were designed to match a novel organic K-storage anode of p-toluic acid/CMK3 (PTA/CMK3). These ILEs exhibited facilely manipulated solvation structures, resulting into excellent compatibility with K-metal as well as promotion of the generation of robust solid-electrolyte interphase (SEI) for stable K-storage. As a result, the optimized PTA/CMK3||KFSI/Pyr13FSI K-storage system delivered a reversible capacity of 190 mAh/g(composites) alongside high coulomb efficiency of 99.7 % at a current density of 200 mA/g for 600 cycles. This work provides a fresh insight on rational design of ILEs-based advanced PIBs with high energy density and safety.

Ionic liquid-based self-healing gel electrolyte for high-performance lithium metal batteries

The gel electrolytes with self-healing function are being considered as promising replacement for traditional liquid electrolytes in lithium metal batteries due to their excellent battery safety, high energy density and minimum electrolyte damage. However, balancing self-healing, conductivity and mechanical properties remains a challenge for their practical application. Herein, a new ion liquid-based self-healing gel polymer electrolyte (IL-SHGPE) is introduced. The electrolyte was synthesized via UV-induced cross-linking of a polymer containing quadruple hydrogen bond units and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM-TFSI) ion liquid. The resultant IL-SHGPE demonstrates exceptional self-healing ability (with 95% healing efficiency within 30 min), excellent thermal stability over a wide temperature range up to 410 °C. It also exhibits impressive mechanical strength with 41.3% elongation and 1.9 MPa tensile stress, room temperature ionic conductivity of 1.29 × 10−3 S/cm, and a wide electrochemical stability window of 5.18V (vs Li/Li+). Lithium metal batteries with this electrolyte showed an initial discharge capacity of 139 mAh g−1 at 1C rate, and a capacity retention of 88.3% after 200 cycles. Therefore, this work provides a significant exploration for balancing self-healing ability, mechanical attributes, and electrochemical performance of lithium batteries, and thus contributing valuable insights towards the development of high-performance self-healing gel electrolytes for lithium metal batteries.

Gel polymer electrolyte-based dual screen-printed electrodes for the headspace quantification of 4-ethylphenol and ethanethiol simultaneously in wines

The identification and correction of negative factors, such as 4-ethylphenol and ethanethiol, is important to comply with food safety regulations and avoid economic losses to wineries. A simple amperometric measurement procedure that facilitates the simultaneous quantification of both compounds in the gas phase has been developed using fullerene and cobalt (II) phthalocyanine-modified dual screen-printed electrodes coated with a room temperature ionic liquid-based gel polymer electrolyte. The replacement of the typical aqueous supporting electrolyte by low-volatility ones improves both operational and storage lifetime. Under the optimum conditions of the experimental variables, Britton Robinson buffer pH 5 and applied potentials of + 0.86 V and + 0.40 V for each working electrode (vs. Ag ref. electrode), reproducibility values of 7.6% (n = 3) for 4-ethylphenol and 6.6% (n = 3) for ethanethiol were obtained, as well as capability of detection values of 23.8 μg/L and decision limits of 1.3 μg/L and 9.2 μg/L (α = β = 0.05), respectively. These dual electrochemical devices have successfully been applied to the headspace detection of both compounds in white and red wines, showing their potential to be routinely used for rapid analysis control in wineries.Graphical

From Molecular Simulations to Experiments: The Recent Development of Room Temperature Ionic Liquid-Based Electrolytes in Electric Double-Layer Capacitors.

Due to the unique properties of room temperature ionic liquids (RTILs), most researchers' interest in RTIL-based electrolytes in electric double-layer capacitors (EDLCs) stems from molecular simulations, which are different from experimental scientific research fields. The knowledge of RTIL-based electrolytes in EDLCs began with a supposition obtained from the results of molecular simulations of molten salts. Furthermore, experiments and simulations were promoted and developed rapidly on this topic. In some instances, the achievements of molecular simulations are ahead of even those obtained from experiments in quantity and quality. Molecular simulations offer more information on the impacts of overscreening, quasicrowding, crowding, and underscreening for RTIL-based electrolytes than experimental studies, which can be helpful in understanding the mechanisms of EDLCs. With the advancement of experimental technology, these effects have been verified by experiments. The simulation prediction of the capacitance curve was in good agreement with the experiment for pure RTILs. For complex systems, such as RTIL-solvent mixtures and RTIL mixture systems, both molecular simulations and experiments have reported that the change in capacitance curves is not monotonous with RTIL concentrations. In addition, there are some phenomena that are difficult to explain in experiments and can be well explained through molecular simulations. Finally, experiments and molecular simulations have maintained synchronous developments in recent years, and this paper discusses their relationship and reflects on their application.

A rechargeable calcium-oxygen battery that operates at room temperature.

Calcium-oxygen (Ca-O2) batteries can theoretically afford high capacity by the reduction of O2 to calcium oxide compounds (CaOx) at low cost1-5. Yet, a rechargeable Ca-O2 battery that operates at room temperature has not been achieved because the CaOx/O2 chemistry typically involves inert discharge products and few electrolytes can accommodate both ahighly reductive Ca metal anode and O2. Here we report a Ca-O2 battery that is rechargeable for 700 cycles at room temperature. Our battery relies on a highly reversible two-electron redox to form chemically reactive calcium peroxide (CaO2) as the discharge product. Using a durable ionic liquid-based electrolyte, this two-electron reaction is enabled by the facilitated Ca plating-stripping in the Ca metal anode at room temperature and improved CaO2/O2 redox in the air cathode. We show the proposed Ca-O2 battery is stable in air and can be made into flexible fibres that are weaved into textile batteries for next-generation wearable systems.

Zwitterionic Materials for Enhanced Battery Electrolytes.

Zwitterions (ZIs), which are molecules bearing an equal number of positive and negative charges and typically possessing large dipole moments, can play an important role in improving the characteristics of a wide variety of novel battery electrolytes. Significant Coulombic interactions among ZI charged groups and any mobile ions present can lead to several beneficial phenomena within electrolytes, such as increased salt dissociation, the formation of ordered pathways for ion transport, and enhanced mechanical robustness. In some cases, ZI additives can also boost electrochemical stability at the electrolyte/electrode interface and enable longer battery cycling. Here, a brief summary of selected key historical and recent advances in the use of ZI materials to enrich the performance of three distinct classes of battery electrolytes is presented. These include: ionic liquid-based, conventional solvent-based, and solid matrix-based (non-ceramic) electrolytes. Exploring a greater chemical diversity of ZI types and electrolyte pairings will likely lead to more discoveries that can empower next-generation battery designs in the years to come.

Investigating the efficacy of functionalized graphene oxide with polyhedral oligomeric silsesquioxane as an effective additive in sustainable ionic liquid-based electrolytes for dye-sensitized solar cells through experimental and DFT studies

The focus of the study has been on the first-ever use of functionalized graphene oxide with polyhedral oligomeric silsesquioxane (FGO-POSS) as an effective additive to ionic liquid-based electrolytes in dye-sensitized solar cells (DSSCs). The electrolytes consisted of binary ionic liquids (ILs), 1-ethyl-3-methylimidazolium iodide (EMII), and 1-butyl-3-methylimidazolium iodide (BMII). Different concentrations of the efficient additive FGO-POSS, ranging from 0% to 1%, were incorporated into the electrolytes.Under highly controlled conditions, a series of reactions was conducted to synthesize FGO-POSS. By reacting graphene oxide (GO) with L-phenylalanine, initially, GO-L-phenylalanine was obtained. In the next phase, GO-L-Phenylalanine reacted with SSQ-[3-(2-Aminoethyl) amino] propyl-Heptaisobutyl substituted to modify its structure with polyhedral oligomeric silsesquioxane (POSS). The ILs, namely EMII, and BMII, were synthesized using the scientific methodologies detailed in the referenced articles. Furthermore, BMII was functionalized with CuI (BMICuI-2) through a specific procedure.Five types of electrolytes were prepared to be employed in DSSCs using prepared ILs and FGO-POSS, and their results were reported to show the electrical and gelatin features of these types of electrolytes. According to this study's findings, using FGO-POSS as an innovative and efficient additive in ILs-based environmentally sustainable nanocomposite electrolytes in an amount of 0.75 wt% increased the value of the short circuit current density (JSC) from 9.433 mA.cm−2 to 15.592 mA.cm−2, the open circuit voltage (VOC) from 0.738 V to 0.762 V, and the overall efficiency (η) increased from 4.965 to 8.303 %. The FGO-POSS and ILs, EMII, and BMICuI-2 boost electron transport and electrolyte conductivity, resulting in increased JSC, VOC, and η. Results of the density functional theory (DFT) calculation indicated that the adsorption of the FGO-POSS electrolyte additives on the TiO2 electrode surface produces midgap states in the band gap of TiO2, resulting in the reduction of the total bandgap and less barrier electron transfer and a redshift in the adsorption edge and enhancement of DSSCs' efficiency.

Nanoscale Investigations of the Electric Double Layer in Protic Ionic Liquids

A hydrogen-based energy storage system will be the backbone of a future energy grid using renewable energies. Polymer electrolyte membrane fuel cells (PEMFCs) are a key element in this energy system as they convert chemical energy stored as hydrogen into electrical energy on demand. PEMFC systems, especially for automotive application, could be significantly improved by increasing the operation temperature above 100 °C. Protic ionic liquids are promising candidates as non-aqueous protic electrolytes for next-generation high-temperature polymer electrolyte membrane fuel cells. These fuel cells have a target operation temperature of 160 °C and allowing for a more efficient water and heat management compared to conventional Nafion®-based PEMFCs, which operate at temperatures below 80 °C [1].In order to ensure a reliable and efficient operation an electrolyte with a high electrochemical performance and stability has to be selected. For this purpose, protic ionic liquids have been proposed and first fuel cell tests have shown promising results [2]. Hence, we aim on understanding the properties of this class of novel electrolytes on an atomistic level, which would allow designing suitable material combinations and predicting their properties for an efficient fuel cell operation. As ionic liquids are molten salts, which are liquid below 100 °C, their electrochemical properties differ significantly from those of aqueous solutions. Instead of a classical electric double layer, which can be described by the models provided by Helmholtz, Gouy-Chapman and Stern, the interface structure formed between the electrolyte and a charged electrode is governed by the interplay between coulomb interaction and steric effects between the (large) molecular ions [3]. In order to understand the formation of this double layer on a metallic electrode, we employ atomic force microscopy and infrared spectroscopy in combination with molecular dynamics simulations. Our results show that in the interface region between the prototype protic ionic liquid diethylmethylammonium triflate ([Dema][TfO]) and a Pt electrode, a dense layered structure consisting of alternating anion and cation layers is present, that extends several nanometres into the bulk of the electrolyte [4]. The composition and structure changes with applied potential due to a preferential attraction of anions or cations depending on the electrode charge. When water is added to the ionic liquid, the layered structure becomes distorted and water molecules appear near the electrode. Since the presence of water will also influence the relevant electrochemical processes such as the oxygen reduction reaction (ORR), the analysis of the double layer structure on an atomistic scale is necessary in order to understand the subtle interactions between the molecules in the electrolyte and to propose design routes for novel more efficient ionic liquid-based electrolytes. Wippermann, K.; Suo, Y.; Korte, C. Oxygen Reduction Reaction Kinetics on Pt in Mixtures of Proton-Conducting Ionic Liquids and Water: The Influence of Cation Acidity. J. Phys. Chem. C 2021, 125, 4423–4435, doi:10.1021/acs.jpcc.0c11374.Skorikova, G.; Rauber, D.; Aili, D.; Martin, S.; Li, Q.; Henkensmeier, D.; Hempelmann, R. Protic Ionic Liquids Immobilized in Phosphoric Acid-Doped Polybenzimidazole Matrix Enable Polymer Electrolyte Fuel Cell Operation at 200 °C. Journal of Membrane Science 2020, 608, 118188, doi:10.1016/j.memsci.2020.118188.Rodenbücher, C.; Wippermann, K.; Korte, C. Atomic Force Spectroscopy on Ionic Liquids. Applied Sciences 2019, 9, 2207, doi:10.3390/app9112207.Rodenbücher, C.; Chen, Y.; Wippermann, K.; Kowalski, P.M.; Giesen, M.; Mayer, D.; Hausen, F.; Korte, C. The Structure of the Electric Double Layer of the Protic Ionic Liquid [Dema][TfO] Analyzed by Atomic Force Spectroscopy. International Journal of Molecular Sciences 2021, 22, 12653, doi:10.3390/ijms222312653. Figure 1

Ionic Liquid - Glyme Mixtures to Modify Solvation Chemistry, Electrochemical and Physiochemical Properties in Lithium Containing Electrolytes

Pyrrolidinium-based ionic liquids are an intriguing material for lithium-based battery electrolytes due to their inherit non-flammability and large electrochemical windows. Poor lithium-ion transport in ionic liquid-based electrolytes hinder the effectiveness of these electrolytes. Solvate ionic liquids were introduced as a subclass of ionic liquids consisting of high concentrations of lithium salts and glymes. For example, the solvate ionic liquid Li(G4)TFSI is an equimolar ratio of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and tetraethylene glycol dimethyl ether (G4). In this work, pyrrolidinium-based ionic liquids containing short polyether side chains, structurally analogous to glymes, are mixed with equimolar amounts of LiTFSI and varying portions of G4. These tertiary mixtures were evaluated based on the ratio of solvating oxygen to lithium ion ([O]/[Li+]) present in the mixture. Trends in the oxidative stability, conductivity and lithium transference number were evaluated from mixtures of [O]/[Li+] between 5 to 8. Oxidative stability of tertiary mixtures with [O]/[Li+] = 5 showed improved oxidative stability compared to the binary Li(G4)TFSI, while [O]/[Li+] > 5 had diminished oxidative stability. DSC thermal analysis between -85°C to +120°C showed the tertiary mixtures helped suppress the glass transition temperature of Li(G4)TFSI to lower temperatures. Changes in the solvation structures were evaluate using spectroscopic analysis, including Raman spectroscopy. The changes in the solvation chemistry were correlated to the physiochemical and electrochemical properties.

Effects of operating temperature on Li-O2 battery with ionic liquid-based binary electrolyte

Awaiting a breakthrough, the Li-oxygen battery (LOB) is considered a promising candidate to meet the high energy demands in the future. Among various critical challenges which hamper its development, the mystery of the electrolyte with optimal properties remains unsolved to this day. In this study, we comprehensively investigated the effects of operating temperature (20C, 40 °C and 60 °C) on the electrochemical performance of LOBs incorporated with room temperature ionic liquid (RTIL) and organic solvent binary electrolyte. We designed and investigated 1-Ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2C1im][Tf2N]) RTIL and dimethyl sulfoxide (DMSO) organic solvent at various volume ratios ((4:1), (1:1), (1:4)). Among the binary electrolytes, ([C2C1im][Tf2N]/DMSO (1:4)) delivered the highest discharge capacities of 3.70 Ah g− 1 (20 °C), 4.0 Ah g− 1 (40 °C) and 3.65 Ah g− 1 (60 °C) as compared with pure [C2C1im][Tf2N] and DMSO. Cycling stability tests showed superior stability of the binary electrolyte ([C2C1im][Tf2N]/DMSO (1:4)) irrespective of the operating temperature. From viscosity and ionic conductivity measurements (at 20–60 °C), [C2C1im][Tf2N]/DMSO (1:4) exhibited the highest ionic conductivity and the lowest viscosity compared with other binary electrolytes (even with pure electrolytes) at any given temperature. Cyclic voltammetry (CV) tests revealed the highest reaction rates for [C2C1im][Tf2N]/DMSO (1:4) binary electrolytes than pure electrolytes. The superior performance of [C2C1im][Tf2N]/DMSO (1:4) binary electrolyte was ascribed to enhanced stability against reactive intermediate species during oxygen reduction reaction (ORR), increased ionic conductivity, low viscosity (comparable with organic electrolytes), improved oxygen solubility, and relatively low evaporation rates.

Enhancing EDLC applications with [BMIM]BF4-integrated cellulose gel electrolyte for sustainable energy storage

Researchers worldwide have extensively carried out the fabrication of supercapacitors using ionic liquid-based gel electrolytes. Gel polymer electrolytes (GPEs) are an excellent alternative electrolyte due to their high ionic conductivity and lack of safety issues associated with solid and liquid polymer electrolytes. This work highlights the performance of a GPE composed of 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM]BF4 mixed with ammonium nitrate (NH4NO3) as the charge carrier, entrapped in methylcellulose (MC) for its application as an electrolyte in supercapacitors. The results of the Fourier transform infrared spectroscopy (FTIR) study are in good agreement with the literature, confirming the interaction between the materials observed through the shifting of the hydroxyl band. Moreover, the addition of [BMIM]BF4 successfully reduced the degree of crystallinity and crystallite size, thus enhancing the amorphous region of the electrolytes, as observed in the X-ray diffraction (XRD) diffractogram. The sample with 10 wt% [BMIM]BF4 (IL10) exhibits the highest ambient conductivity of (2.44 ± 0.36) × 10−2 S cm−1. The obtained ionic transference number (tion) of 0.98 confirms that ions are the dominant charge carriers. Considering its electrochemically stability up to 2.6 V within a potential range of 3.0 V, the IL10 electrolyte was chosen as a separator for application in an electric double-layer capacitor (EDLC). The EDLC is characterized via cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) analysis.

Flavonoid from Hedera helix fruits: A promising new natural sensitizer for DSSCs

Owing to their lower cost, simplicity of manufacture, environmental friendliness, and accessibility of raw materials, natural dyes emerge as the most viable substitute for dye-sensitized solar cells (DSSCs). However, the photovoltaic performance of DSSCs based on natural dyes stays behind that of their metal-based counterparts. This can be partially overcome when appropriate chemical additives are present in the redox electrolyte employed in DSSCs based on natural dyes. To determine the ideal additives for DSSCs based on natural dye extracted from Hedera helix fruits, including flavonoid pigments, we thoroughly compare the actions of 1-butyl-3-methylimidazolium iodide, guanidinium thiocyanate, and tert-butylpyridine additives in ionic liquid-based redox electrolytes. These additives suppress undesirable charge recombination and parasitic resistance effects, achieving a more significant enhancement of open-circuit voltage (Voc) of 130 mV and fill factor (FF) of 30 % compared to their counterparts. Utilizing prepared electrolyte solutions in DSSCs also presents an outstanding increase in the efficiency of the devices, from 0.75 % to 1.17 % (∼56 % improvement), which outperforms other natural dye sources containing flavonoid pigments as well. The experimental findings provided in this study demonstrate that the development of electrolytes tailored for natural dyes can lead to greater power conversion efficiency.

Opportunities for ionic liquid-based electrolytes in rechargeable lithium batteries

Opportunities for ionic liquid-based electrolytes in rechargeable lithium batteries

Ferric ion-assisted assembly of MXene/TiO2-graphene aerogel for ionic liquid-based supercapacitors

To achieve pseudocapacitance by driving reversible redox reactions is scientifically appealing to realize high energy density of supercapacitors (SCs). In this work, a unique ferric ions-assisted self-assembly MXene/TiO2-graphene aerogel composite (MXene/TiO2-Fe-G) is developed. The MXene/TiO2-Fe-G composite has a 3D hierarchical porous framework, large accessible specific surface area, and amorphous TiO2 modified on the surface of MXene nanosheets. Importantly, amorphous TiO2, generated from the partial oxidation of MXene, can contribute enormous pseudocapacitance via the reversible redox reaction with Lithium ions. In addition, ferric cations with variable valence states can also provide pseudocapacitance. A trinary ionic liquid-based electrolyte (1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide-acetonitrile-lithium bis(trifluoromethanesulfonyl)imide, EmimTFSI-ACN-LiTFSI) with a wide electrochemical stability potential window is also formulated to match the new material. Consequently, the MXene/TiO2-Fe-G composite as the negative electrode shows a superb specific capacitance of 196.4 F g−1 at 1 A g−1. An asymmetric supercapacitor assembled with the MXene/TiO2-Fe-G anode and self-synthesized nitrogen-doped reduced graphene oxide aerogel (N-RGA) cathode can deliver a high energy density of 54 Wh kg−1 at a high-power density of 1737 W kg−1. This work provides a possibility of implementing pseudocapacitance by changing the morphology and structure of MXene composites to match the ionic liquid-based electrolyte, which can considerably enhance the performance of MXene-based SCs.

Honeycomb carbon obtained from coal liquefaction residual asphaltene for high-performance supercapacitors in ionic and organic liquid-based electrolytes

Rational design of electrode material with high specific surface area (SSA) and hierarchical porous structure is significant for supercapacitor. Herein, 3D honeycomb carbon was prepared from coal liquefaction residual asphaltene by a template-assisted method. The activated 3D honeycomb carbon (C-SiO2) exhibits high SSA and hierarchical porous structure, including microporous, mesoporous, and microporous. These merits enhance the contact area between the electrode material and the electrolyte, and offer more active sites. The C-SiO2 shows an excellent specific capacitance (247 F g−1/1 A g−1) and superior rate capability (134 F g−1/100 A g−1). Meanwhile, the assembled symmetric supercapacitors also exhibit high specific capacitance (188 F g−1/1 A g−1, 133 F g−1/100 A g−1) and excellent cycle stability with a specific capacity of 153 F g−1 after 20,000 cycles at 5 A g−1. Moreover, this device presents a remarkable energy density of 21.1 Wh kg−1 and 23.7 Wh kg−1 at the power density of 10,000 W kg−1, when the aqueous electrolyte is replaced by ionic liquid or organic electrolyte. At the same time, a LED bulb can be powered by the symmetrical supercapacitors, further verifying its high energy densities for future practical applications.

Study of [EMIM] [EtSO4] ionic liquid-based gel polymer electrolyte mediated with hydroquinone redox additive for flexible supercapacitors

Gel Polymer Electrolytes (GPEs) are considered as suitable candidates in the design of energy storage devices like flexible supercapacitors due to their higher safety and flexibility. Incorporating small quantity of redox additives in GPE significantly improves their conductivity and is considered as an innovative method to enhance the capacitance of supercapacitors, because both electrolyte and electrode materials contribute to the capacitance. In this work, performance of Flexible Supercapacitor's (FSCs) using symmetrical Laser Induced Graphene (LIG) as electrodes and ionic liquid 1-Ethyl-3-Methylimidazolium Ethyl Sulfate [EMIM] [EtSO4] incorporated in Gel Polymer Electrolyte (GPE) with and without redox additive Hydroquinone (HQ) is presented. Upon electrochemical characterization using Galvanostatic Charge Discharge (GCD), it was found that the FSC with redox additive showed highest areal capacitance and energy density of 15.1 mFcm−2 and 1.54 μWhcm−2 respectively and FSC without redox additive showed an areal capacitance and energy density of 1.94 mFcm−2 and 0.14 μWhcm−2 respectively at 2 mAcm−2. The device with redox additive also showed 100 % columbic efficiency after 50 cycles and maintained 80 % capacitance for 5000 charge-discharge cycles. Additionally, the electrolyte with the redox additive showed superior conductivity of 10.8 mScm−1, demonstrating that modifying electrolyte by adding redox additive has been a simple yet effective method to enhance the overall performance of FSCs. Also, the synthesized LIG was characterized by X-ray Diffraction (XRD), Raman and Scanning Electron Microscopy techniques which confirmed the formation of bi-layer porous graphene.

Effects of Operating Temperature on Li-O2 Battery with Ionic Liquid-Based Binary Electrolyte

The progress of rechargeable Li-O2 battery (LOB) is hampered due to the number of challenges its components present. Among various critical challenges, the choice of electrolyte has always been a bottleneck impeding the breakthrough in the development of LOB. Various electrolytes, including organic solvents and room-temperature ionic liquids (RTILs) have been developed and studied. Each electrolyte comes with various limitations, which restrict its application in the LOB. These include thermal and electrochemical stability, volatility, viscosity, flammability, capability to dissolve incoming oxygen, diffusivity, and ionic conductivity. Consequently, no electrolyte could be regarded as an ideal electrolyte. Nonetheless, efforts have been made to tune the physiochemical properties of the electrolyte by blending two or more miscible solvents. High thermal and electrochemical stability and negligible volatility of RTILs can be combined with high diffusivity and ionic conductivity of organic solvents by merely blending them with optimized volume ratios.In this study, we comprehensively investigated the effects of operating temperature (20°C, 40°C and 60°C) on the electrochemical performance of LOBs incorporated with RTIL and organic solvent binary electrolyte. We designed and investigated, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2C1im][Tf2N]) RTIL and dimethyl sulfoxide (DMSO) organic solvent at various volume ratios ((4:1), (1:1), (1:4)). Among the binary electrolytes, ([C2C1im][Tf2N]/DMSO (1:4)) delivered the highest discharge capacities of 3.70 Ah g-1 (20°C), 4.0 Ah g-1 (40°C) and 3.65 Ah g-1 (60°C) as compared with pure [C2C1im][Tf2N] and DMSO. Cycling stability tests showed superior stability of the binary electrolyte ([C2C1im][Tf2N]/DMSO (1:4)) irrespective of the operating temperature. From viscosity and ionic conductivity measurements (at 20-60°C), [C2C1im][Tf2N]/DMSO (1:4) exhibited the highest ionic conductivity and the lowest viscosity compared with other binary electrolytes and pure RTIL at any given temperature. Cyclic voltammetry (CV) tests revealed a higher reaction rate with [C2C1im][Tf2N]/DMSO (1:4) binary electrolytes than pure electrolytes. The superior performance of [C2C1im][Tf2N]/DMSO (1:4) binary electrolyte was ascribed to enhanced stability against reactive intermediate species during oxygen reduction reaction (ORR), increased ionic conductivity, low viscosity (comparable with organic electrolytes), improved oxygen solubility, and relatively low evaporation rates. The detailed results and discussion will be presented during the presentation.