Effects of Operating Temperature on Li-O2 Battery with Ionic Liquid-Based Binary Electrolyte

Abstract

The progress of rechargeable Li-O2 battery (LOB) is hampered due to the number of challenges its components present. Among various critical challenges, the choice of electrolyte has always been a bottleneck impeding the breakthrough in the development of LOB. Various electrolytes, including organic solvents and room-temperature ionic liquids (RTILs) have been developed and studied. Each electrolyte comes with various limitations, which restrict its application in the LOB. These include thermal and electrochemical stability, volatility, viscosity, flammability, capability to dissolve incoming oxygen, diffusivity, and ionic conductivity. Consequently, no electrolyte could be regarded as an ideal electrolyte. Nonetheless, efforts have been made to tune the physiochemical properties of the electrolyte by blending two or more miscible solvents. High thermal and electrochemical stability and negligible volatility of RTILs can be combined with high diffusivity and ionic conductivity of organic solvents by merely blending them with optimized volume ratios.In this study, we comprehensively investigated the effects of operating temperature (20°C, 40°C and 60°C) on the electrochemical performance of LOBs incorporated with RTIL and organic solvent binary electrolyte. We designed and investigated, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2C1im][Tf2N]) RTIL and dimethyl sulfoxide (DMSO) organic solvent at various volume ratios ((4:1), (1:1), (1:4)). Among the binary electrolytes, ([C2C1im][Tf2N]/DMSO (1:4)) delivered the highest discharge capacities of 3.70 Ah g-1 (20°C), 4.0 Ah g-1 (40°C) and 3.65 Ah g-1 (60°C) as compared with pure [C2C1im][Tf2N] and DMSO. Cycling stability tests showed superior stability of the binary electrolyte ([C2C1im][Tf2N]/DMSO (1:4)) irrespective of the operating temperature. From viscosity and ionic conductivity measurements (at 20-60°C), [C2C1im][Tf2N]/DMSO (1:4) exhibited the highest ionic conductivity and the lowest viscosity compared with other binary electrolytes and pure RTIL at any given temperature. Cyclic voltammetry (CV) tests revealed a higher reaction rate with [C2C1im][Tf2N]/DMSO (1:4) binary electrolytes than pure electrolytes. The superior performance of [C2C1im][Tf2N]/DMSO (1:4) binary electrolyte was ascribed to enhanced stability against reactive intermediate species during oxygen reduction reaction (ORR), increased ionic conductivity, low viscosity (comparable with organic electrolytes), improved oxygen solubility, and relatively low evaporation rates. The detailed results and discussion will be presented during the presentation.