Ion Transport Research Articles

Efflorescence of fly ash-based geopolymer mortars under quasinatural conditions: the relationship between curing temperature, ion transport, and compressive strength

This investigation reports the effect of curing temperatures ranging from 20 °C to 80 °C on the efflorescence of fly ash-based geopolymer mortars under quasinatural conditions. The microstructures of the geopolymers before and after efflorescence were characterized by SEM and MIP, respectively. These characterizations are adopted to further explain the change in compressive strength. The micromorphology and phase assemblage of the efflorescence products were identified by SEMEDS and XRD, respectively, indicating that the significant ions involved in the efflorescence include Ca2+, Na+, and CO32-; then, the concentrations of those ions in the leachate were detected by ICP, AAS, and acidbase neutralization titration, respectively. The results show that low curing temperatures (≤ 50 °C) promote the diffusion of ions into the leachate, while high curing temperatures (> 50 °C) contribute to the transportation of ions towards the drying part for the formation of hollow structured Na2CO3·7H2O. Although the increase in the compressive strength of the geopolymers resulting from efflorescence decreased with increasing curing temperature, the 50 °C-cured geopolymer exhibited the highest compressive strength during efflorescence. This study provides a reference for mitigating efflorescence and improving practicability in the hydraulic engineering of geopolymers.

Interface chemical reconstruction with residual lithium compounds on nickel-rich cathode by nonstoichiometrical MoO3-x coating enables high stability

The layered lithium nickel-rich cathodes have become one of the most promising candidates for next-generation lithium-ion batteries with high energy density, However, the nickel-rich cathode suffers from a rapid decay of capacity due to their intrinsic instability and undesirably residual lithium compounds originated from LiNiO2 structural changes on the surface, hindering large-scale commercial application. Herein, a continuous and uniform oxygen vacancy enriched-MoO3-x coating was successfully synthesized and reacted residual lithium compounds as a functional layer on the cathode. Such chemically reconstructed coating (Li2MoO4) strategy endows the 1 wt% MoO3-x coated NCA cathode with a fast Li+ ions transport and enhanced structural stability, leading to an outstanding discharge capacity of 214.0 mAh g−1 at 0.1C (1C = 270 mA g−1), a better capacity retention of 80.3 % after 120 cycles at 0.5C, and an excellent high rate capability of 120 mAh g−1 at 5C cycled in voltage range of 2.75 V–4.3 V. This work provides an effective strategy to modulate surface structure towards advanced Ni-rich cathodes for high-performance lithium-ion batteries.

ATP1A3 Disease Spectrum Includes Paroxysmal Weakness and Encephalopathy Not Triggered by Fever.

Heterozygous pathogenic variants in ATP1A3, which encodes the catalytic alpha subunit of neuronal Na+/K+-ATPase, cause primarily neurologic disorders with widely variable features that can include episodic movement deficits. One distinctive presentation of ATP1A3-related disease is recurrent fever-triggered encephalopathy. This can occur with generalized weakness and/or ataxia and is described in the literature as relapsing encephalopathy with cerebellar ataxia. This syndrome displays genotype-phenotype correlation with variants at p.R756 causing temperature sensitivity of ATP1A3. We report clinical and in vitro functional evidence for a similar phenotype not triggered by fever but associated with protein loss-of-function. We describe the phenotype of an individual with de novo occurrence of a novel heterozygous ATP1A3 variant, NM_152296.5:c.388_390delGTG; p.(V130del). We confirmed the pathogenicity of p.V130del by cell survival complementation assay in HEK293 cells and then characterized its functional impact on enzymatic ion transport and extracellular sodium binding by two-electrode voltage clamp electrophysiology in Xenopus oocytes. To determine whether variant enzymes reach the cell surface, we surface-biotinylated oocytes expressing N-tagged ATP1A3. The proband is a 7-year-old boy who has had 2 lifetime episodes of paroxysmal weakness, encephalopathy, and ataxia not triggered by fever. He had speech regression and intermittent hand tremors after the second episode but otherwise spontaneously recovered after episodes and is at present developmentally appropriate. The p.V130del variant was identified on clinical trio exome sequencing, which did not reveal any other variants possibly associated with the phenotype. p.V130del eliminated ATP1A3 function in cell survival complementation assay. In Xenopus oocytes, p.V130del variant Na+/K+-ATPases showed complete loss of ion transport activity and marked abnormalities of extracellular Na+ binding at room temperature. Despite this clear loss-of-function effect, surface biotinylation under the same conditions revealed that p.V130del variant enzymes were still present at the oocyte's cell membrane. This individual's phenotype expands the clinical spectrum of ATP1A3-related recurrent encephalopathy to include presentations without fever-triggered events. The total loss of ion transport function with p.V130del, despite enzyme presence at the cell membrane, indicates that haploinsufficiency can cause relatively mild phenotypes in ATP1A3-related disease.

Microglial SIX2 suppresses lipopolysaccharide (LPS)-induced neuroinflammation by up-regulating FXYD2 expression

Parkinson’s disease (PD) is a severe neurodegenerative disease associated with the loss of dopaminergic (DA) neurons in the substantia nigra (SN). Although its pathogenesis remains unclear, microglia-mediated neuroinflammation significantly contributes to the development of PD. Here we showed that the sine oculis homeobox (SIX) homologue family transcription factors SIX2 exerted significant effects on neuroinflammation. The SIX2 protein, which is silenced during development, was reactivated in lipopolysaccharide (LPS)-treated microglia. The reactivated SIX2 in microglia mitigated the LPS induced inflammatory effects, and then reduced the toxic effect of conditioned media (CM) of microglia on co-cultured MES23.5 DA cells. Using the LPS-stimulated Cx3cr1-CreERT2 mouse model, we also demonstrated that the highly-expressed SIX2 in microglia obviously attenuated neuroinflammation and protected the DA neurons in SN. Further RNA-Seq analysis on the inflammatory activated microglia revealed that the SIX2 exerted these effects via up-regulating the FXYD domain containing ion transport regulator 2 (FXYD2). Taken together, our study demonstrated that SIX2 was an endogenous anti-inflammatory factor in microglia, and it exerted anti-neuroinflammatory effects by regulating the expression of FXYD2, which provides new ideas for anti-neuroinflammation in PD.

Gate-All-Around Nanopore Osmotic Power Generators.

Nanofluidic channels in a membrane represent a promising avenue for harnessing blue energy from salinity gradients, relying on permselectivity as a pivotal characteristic crucial for inducing electricity through diffusive ion transport. Surface charge emerges as a central player in the osmotic energy conversion process, emphasizing the critical significance of a judicious selection of membrane materials to achieve optimal ion permeability and selectivity within specific channel dimensions. Alternatively, here we report a field-effect approach for in situ manipulation of the ion selectivity in a nanopore. Application of voltage to a surround-gate electrode allows precise adjustment of the surface charge density at the pore wall. Leveraging the gating control, we demonstrate permselectivity turnover to enhanced cation selective transport in multipore membranes, resulting in a 6-fold increase in the energy conversion efficiency with a power density of 15 W/m2 under a salinity gradient. These findings not only advance our fundamental understanding of ion transport in nanochannels but also provide a scalable and efficient strategy for nanoporous membrane osmotic power generation.

Bark‐Inspired Functional‐Carbon/Potassium Composite Electrode with Fast Ion Transport Channels for Dendrite‐Free Potassium Metal Batteries

AbstractPotassium metal batteries (PMBs) are regarded as viable candidates for future electrochemical energy storage devices with potential high energy density and low cost. However, uncontrollable potassium dendrite growth and huge volume expansion severely inhibit the practical application of PMBs. Herein, inspired by the structure and functionalities of tree bark, an antimony (Sb) nano‐clusters decorated N‐doped interconnected carbon nanospheres/potassium composite electrode with biomimetic fast ionic channels is developed to realize the dendrite‐free potassium metal batteries. The composite electrode provides abundant nucleation sites and interconnected ion transport channels, facilitating rapid ion transport kinetics and highly reversible potassium plating/stripping behaviors. Consequently, the assembled symmetric cell exhibits an ultra‐long cycle life (1100 h at 1.0 mA cm−2/1.0 mAh cm−2) in carbonate electrolyte. Moreover, the K full cells demonstrate enhanced cycling stability (1500 cycles at 8 C) and rate capacity (117.27 mAh g−1 at 20 C). This novel biomimetic design of composite anode presents an effective and rational approach for achieving stable PMBs.

Editors' Choice—Visualizing the Impact of the Composite Cathode Microstructure and Porosity on Solid-State Battery Performance

Abstract The kinetics of composite cathodes for solid-state batteries (SSBs) relies heavily on their micro-structure. Spatial distribution of the different phases, porosity, interface areas, and tortuosity factors are important descriptors that need accurate quantification for models to predict the elec-trochemistry and mechanics of SSBs. In this study, high-resolution focused ion beam-scanning electron microscopy tomography was used to investigate the microstructure of cathodes com-posed of a nickel-rich cathode active material (NCM) and a thiophosphate-based inorganic solid electrolyte (ISE). The influence of the ISE particle size on the microstructure of the cathode was visualized by 3D reconstruction and charge transport simulation. By comparison of experimen-tally determined and simulated conductivities of composite cathodes with different ISE particle sizes, the electrode charge transport kinetics is evaluated. Porosity is shown to have a major influence on the cell kinetics and the evaluation of the active mass of electrochemically active particles reveals a higher fraction of connected NCM particles in electrode composites utilizing smaller ISE particles. The results highlight the importance of homogeneous and optimized mi-crostructures for high performance SSBs, securing fast ion and electron transport.

Noninvasive assessment of organ-specific and shared pathways in multi-organ fibrosis using T1 mapping.

Fibrotic diseases affect multiple organs and are associated with morbidity and mortality. To examine organ-specific and shared biologic mechanisms that underlie fibrosis in different organs, we developed machine learning models to quantify T1 time, a marker of interstitial fibrosis, in the liver, pancreas, heart and kidney among 43,881 UK Biobank participants who underwent magnetic resonance imaging. In phenome-wide association analyses, we demonstrate the association of increased organ-specific T1 time, reflecting increased interstitial fibrosis, with prevalent diseases across multiple organ systems. In genome-wide association analyses, we identified 27, 18, 11 and 10 independent genetic loci associated with liver, pancreas, myocardial and renal cortex T1 time, respectively. There was a modest genetic correlation between the examined organs. Several loci overlapped across the examined organs implicating genes involved in a myriad of biologic pathways including metal ion transport (SLC39A8, HFE and TMPRSS6), glucose metabolism (PCK2), blood group antigens (ABO and FUT2), immune function (BANK1 and PPP3CA), inflammation (NFKB1) and mitosis (CENPE). Finally, we found that an increasing number of organs with T1 time falling in the top quintile was associated with increased mortality in the population. Individuals with a high burden of fibrosis in ≥3 organs had a 3-fold increase in mortality compared to those with a low burden of fibrosis across all examined organs in multivariable-adjusted analysis (hazard ratio = 3.31, 95% confidence interval 1.77-6.19; P = 1.78 × 10-4). By leveraging machine learning to quantify T1 time across multiple organs at scale, we uncovered new organ-specific and shared biologic pathways underlying fibrosis that may provide therapeutic targets.

Vitrified Metal-Organic Framework Composite Electrolyte Enabling Dendrite-Free and Long-Lifespan Solid-State Lithium Metal Batteries.

Solid-state lithium metal batteries (LMBs) are still plagued with low ionic conductivity and inferior interfacial contact, which hinder their practical implementation. Herein, a quasi-solid-state composite electrolyte, poly(1,3-dioxolane) (PDOL)/glassy ZIF-62 (PGZ) with fast ion transport and intimate interface contact, is fabricated via in situ polymerization. The in situ polymerization of DOL in an electrolyte matrix not only improves the exterior interface between electrolyte/electrode but also optimizes the inner interfaces among glassy particles, rendering PGZ as an uninterrupted ionic conductor. Moreover, PGZ inherits the superior ionic conductivity and the robust dendrite prohibition of glassy MOFs originating from their grain-boundary-free nature, isotropy, and abundant groups containing N species. As expected, our proposed PGZ exhibits a prominent ionic conductivity of 6.3 × 10-4 S cm-1 at 20 °C. Li|PGZ|LiFePO4 delivers an outstanding rate performance (103 mAh g-1 at 4C) and a stable cycling capacity (118 mAh g-1 at 1C over 1000 cycles). PGZ also presents excellent low-temperature cycling performance with 75 mAh g-1 for 480 cycles at -20 °C and excellent flame retardance. Even at a high loading of 12.1 mg cm-2, it can still discharge at 140 mAh g-1 for 100 cycles. Hence, PGZ prepared via in situ polymerization holds enormous prospects as a solid-state electrolyte for high-performance and safe LMBs.

Reactive Oxygen Species and Mitochondrial Calcium's Roles in the Development of Atherosclerosis.

In the last decade, there has been increasing evidence connecting mitochondrial dysfunction to the onset and advancement of atherosclerosis. Both reactive oxygen species (ROS) and the disruption of mitochondrial calcium (Ca2+) regulation have garnered significant attention due to their involvement in various stages of atherosclerosis. This abstract discusses the potential therapeutic applications of targeting mitochondrial calcium (Ca2+) and reactive oxygen species (ROS), while also providing an overview of their respective roles in atherosclerosis. The abstract underscores the importance of mitochondrial Ca2+ homeostasis in cellular physiology, including functions such as energy production, cell death signaling, and maintaining redox balance. Alterations in the mitochondria's Ca2+ handling disrupt all these procedures and speed up the development of atherosclerosis. Reactive oxygen species (ROS), generated during mitochondrial respiration, are widely recognized as significant contributors to the development of atherosclerosis. Through modulating the function of calcium ion (Ca2+) transport proteins, ROS can impact the regulation of mitochondrial Ca2+ handling. These oxidative modifications lead to vascular remodeling and plaque formation by impairing endothelial function, encouraging the recruitment of inflammatory cells, and promoting smooth muscle cell proliferation. Preclinical investigations indicate that interventions aimed at regulating the production and elimination of reactive oxygen species (ROS) hold promise for mitigating atherosclerosis. Targeting mitochondrial processes represents a prospective therapeutic strategy for addressing this condition. Further research is necessary to elucidate the intricate molecular mechanisms associated with mitochondrial dysfunction in atherosclerosis and develop effective therapeutic strategies to decelerate disease progression.

Semiconductor p–n Junction Nanofluidic Channels for Light-driven Ion Transport

Semiconductor p–n Junction Nanofluidic Channels for Light-driven Ion Transport

Electrochemically Dealloying Engineering toward Integrated Monolithic Electrodes with Superior Electrochemical Li-Storage Properties.

Integrated monolithic electrodes (IMEs) free of inactive components demonstrate great potential in boosting energy-power densities and cycling life of lithium-ion batteries. However, their practical applications are significantly limited by low active substance loading (< 4.0mgcm-2 and 1.0gcm-3), complicated manufacturing process, and high fabrication cost. Herein, employing industrial Cu-Mn alloy foil as a precursor, a simple neutral salt solution-mediated electrochemical dealloying strategy is proposed to address such problems. The resultant Cu-Mn IMEs achieve not only a significantly larger active material loading due to the in situ generated Cu2O and MnOx (ca. 16.0mgcm-2 and 1.78gcm-3), simultaneously fast transport of ions and electrons due to the well-formed nanoporous structure and built-in Cu current collector, but also high structural stability due to the interconnected ligaments and suitable free space to relieve the volume expansion upon lithiation. As a result, they demonstrate remarkable performances including large specific capacities (> 5.7mAhcm-2), remarkable pseudocapacitive effect despite the battery-type constitutes, long cycling life, and good working condition in a lithium-ion full cell. This study sheds new light on the further development of IMEs, enriches the existing dealloying techniques, and builds a bridge between the two.

Elastic scattering cross sections and transport of tin ions in extreme ultraviolet lithography sources

Energetic tin ions are created by laser produced plasmas in extreme-ultraviolet lithography sources where hydrogen must be used as a buffer gas to protect critical optical components. In this study, the quantum chemistry code NWChem is used to calculate the interatomic potential between singly ionized tin and molecular hydrogen. The interatomic potential was fit by an inverse-power potential, a modified universal ZBL potential, and a two-piece-Lennard-Jones potential which were in turn used to calculate the classical distance of closest approach, scattering angle, total elastic scattering cross sections. Furthermore, the universal Ziegler-Biersack-Littmark (ZBL) potential was used in the open-source binary collision approximation codes RustBCA as well as Stopping Range in Matter and Transport of Ion in Matter (SRIM/TRIM) to calculate ion ranges, straggling, and stopping cross sections in a hydrogen gas target.

The role of Zip1 and Zip3 in cadmium accumulation in Fujian oyster (Crassostrea angulata)

Oysters are notably susceptible to accumulating substantial amounts of cadmium (Cd), leading to food safety concerns, yet the molecular mechanisms are not fully understood. Previous study identified a significant correlation between polymorphisms in the Zip1 and Zip3 of Fujian oyster (Crassostrea angulata) and the levels of Cd accumulation. Zip1 and Zip3, belonging to the Zip family, are primarily responsible for the cellular transport of zinc and other metal ions. To delve deeper into their roles in Cd transport within oysters, this research cloned and analyzed the sequences of Fujian oyster Zip1 and Zip3. The open reading frames for Zip1 and Zip3 were 960 and 978 bp, respectively, encoding proteins of 319 and 325 amino acids. Following Cd exposure, the expression levels of these genes in the mantle, gills, and other tissues initially increased significantly before decreasing, demonstrating a dose-dependent response. The lowest expression levels were observed in the adductor muscle, with Zip1 reaching its highest expression in the mantle and Zip3 in the visceral mass. In vitro RNAi experiments revealed that silencing Zip1 led to a 1.26-fold decrease in new 113Cd accumulation in the mantle, whereas silencing Zip3 resulted in a 1.29-fold increase. Immunohistochemistry showed weak expression of Zip1 and Zip3 proteins in the connective tissue of the mantle. In summary, Zip1 and Zip3 in Fujian oyster can transport Cd as a substrate, and played different roles in the absorption and efflux of Cd.

Amorphous FeSnOxNanosheets with Hierarchical Vacancies for Room-Temperature Sodium-Sulfur Batteries.

Room-temperature sodium-sulfur (RT Na-S) batteries, noted for their low material costs and high energy density, are emerging as a promising alternative to LIBs in various applications including power grids and standalone renewable energy systems. These batteries are commonly assembled with glass fiber membranes, which face significant challenges like the dissolution of polysulfides, sluggish sulfur conversion kinetics, and the dendrites growth. Here, we develop an amorphous FeSnOx nanosheet with hierarchical vacancies, including abundant oxygen vacancies (Ovs) and nano-sized perforations, that can be assembled into a multifunctional layer overlaying commercial separators for RT Na-S batteries. The Ovs offer strong adsorption and abundant catalytic sites for polysulfides, while the defect concentration is finely tuned to elucidate the polysulfides conversion mechanisms. The nano-sized perforations aid in regulating Na ions transport, resulting in uniform Na deposition. Moreover, the strategic addition of trace amounts of Ti3C2 forms an amorphous/crystalline interface that significantly improves the mechanical properties of the separator and suppresses dendrite growth. As a result, the task-specific layer achieves ultra-light (~0.1mg cm-2), ultra-thin (~200nm), and ultra-robust (modulus = 4.9GPa) characteristics. Consequently, the RT Na-S battery maintained a high capacity of 610.3mAh g-1 and an average Coulombic efficiency of 99.9% after 400 cycles at 0.5C.

Amorphous FeSnOx Nanosheets with Hierarchical Vacancies for Room‐Temperature Sodium‐Sulfur Batteries

Room‐temperature sodium‐sulfur (RT Na‐S) batteries, noted for their low material costs and high energy density, are emerging as a promising alternative to LIBs in various applications including power grids and standalone renewable energy systems. These batteries are commonly assembled with glass fiber membranes, which face significant challenges like the dissolution of polysulfides, sluggish sulfur conversion kinetics, and the dendrites growth. Here, we develop an amorphous FeSnOx nanosheet with hierarchical vacancies, including abundant oxygen vacancies (Ovs) and nano‐sized perforations, that can be assembled into a multifunctional layer overlaying commercial separators for RT Na‐S batteries. The Ovs offer strong adsorption and abundant catalytic sites for polysulfides, while the defect concentration is finely tuned to elucidate the polysulfides conversion mechanisms. The nano‐sized perforations aid in regulating Na ions transport, resulting in uniform Na deposition. Moreover, the strategic addition of trace amounts of Ti3C2 forms an amorphous/crystalline interface that significantly improves the mechanical properties of the separator and suppresses dendrite growth. As a result, the task‐specific layer achieves ultra‐light (~0.1mg cm‐2), ultra‐thin (~200nm), and ultra‐robust (modulus = 4.9GPa) characteristics. Consequently, the RT Na‐S battery maintained a high capacity of 610.3mAh g‐1 and an average Coulombic efficiency of 99.9% after 400 cycles at 0.5C.

Type 1 diabetes human enteroid studies reveal major changes in the intestinal epithelial compartment

Lack of understanding of the pathophysiology of gastrointestinal (GI) complications in type 1 diabetes (T1D), including altered intestinal transcriptomes and protein expression represents a major gap in the management of these patients. Human enteroids have emerged as a physiologically relevant model of the intestinal epithelium but establishing enteroids from individuals with long-standing T1D has proven difficult. We successfully established duodenal enteroids using endoscopic biopsies from pediatric T1D patients and compared them with aged-matched enteroids from healthy subjects (HS) using bulk RNA sequencing (RNA-seq), and functional analyses of ion transport processes. RNA-seq analysis showed significant differences in genes and pathways associated with cell differentiation and proliferation, cell fate commitment, and brush border membrane. Further validation of these results showed higher expression of enteroendocrine cells, and the proliferating cell marker Ki-67, significantly lower expression of NHE3, lower epithelial barrier integrity, and higher fluid secretion in response to cAMP and elevated calcium in T1D enteroids. Enteroids established from pediatric T1D duodenum identify characteristics of an abnormal intestinal epithelium and are distinct from HS. Our data supports the use of pediatric enteroids as an ex-vivo model to advance studies of GI complications and drug discovery in T1D patients.

A network model to predict ionic transport in porous materials

Understanding the dynamics of electric-double-layer (EDL) charging in porous media is essential for advancements in next-generation energy storage devices. Due to the high computational demands of direct numerical simulations and a lack of interfacial boundary conditions for reduced-order models, the current understanding of EDL charging is limited to simple geometries. Here, we present a network model to predict EDL charging in arbitrary networks of long pores in the Debye-Hückel limit without restrictions on EDL thickness and pore radii. We demonstrate that electrolyte transport is described by Kirchhoff's laws in terms of the electrochemical potential of charge (the valence-weighted average of the ion electrochemical potentials) instead of the electric potential. By employing the equivalent circuit representation suggested by these modified Kirchhoff's laws, our methodology accurately captures the spatial and temporal dependencies of charge density and electric potential, matching results obtained from computationally intensive direct numerical simulations. Our network model provides results up to six orders of magnitude faster, enabling the efficient simulation of a triangular lattice of five thousand pores in 6 min. We employ the framework to study the impact of pore connectivity and polydispersity on electrode charging dynamics for pore networks and discuss how these factors affect the time scale, energy density, and power density of capacitive charging. The scalability and versatility of our methodology make it a rational tool for designing 3D-printed electrodes and for interpreting geometric effects on electrode impedance spectroscopy measurements.

#795 Genetics of serum electrolytes: a genome-wide association approach in two European cohorts

Abstract Background and Aims Chloride, potassium and sodium are electrolytes that play a key role in several physiological processes. To date, the genetic factors underlying their differences in the general population are not fully understood and need to be further investigated. In this study, we aimed at dissecting the genetics of the levels of these serum electrolytes in the European population by genomic approaches. Method We genotyped and analysed data from 3057 North-Eastern Italian individuals participating in the INCIPE (Initiative on Nephropathy, of relevance to public health, which is Chronic, possibly in its Initial stages, and carries a Potential risk of major clinical End-points) cohort. Genomic data were processed for quality controls (using plink and bcftools), following these exclusion criteria: sample missingness &amp;gt;0.15, genotype missingness &amp;gt;0.02, relatedness up to 2nd degree, non-European ethnicity. Next, the dataset underwent genotype imputation on the Michigan Imputation Server, using the Human Reference Consortium panel and filtering for imputation confidence (R2 &amp;gt;0.3). Typed and imputed data were then analysed on genome-wide association studies (GWAS, using rvtest) for each of the three serum electrolytes. The same analytical procedure was applied to 14926 individuals from the Rotterdam Study (RS) cohort (a prospective cohort study ongoing since 1990 in Rotterdam). Thus, summary statistics from all the phenotypes and cohorts were jointly analysed in a genome-wide meta-analysis setting (using METAL). Meta-analyses results underwent functional annotation on the FUMAGWAS platform, to obtain biological and functional insights and to allow variants and genes prioritisation. Results Quality controls and genotype imputation resulted in a total of 857 (INCIPE1) and 1343 (INCIPE2) samples and 8 million variants for the INCIPE cohort; 2056 (RS1), 2042 (RS2) and 2958 (RS3) samples and 7.7 million variants for the Rotterdam Study cohort. GWAS showed genome-wide signals (p &amp;lt; 5e-8) for chloride and sodium and suggestive signals (p &amp;lt; 5e-5) for potassium. Meta-analyses partially replicated results obtained on the INCIPE cohort, showing signals for all the three electrolytes over the suggestive threshold only. Finally, functional annotation gave insights on associated genes and markers. Chloride showed association with genes reported in nephrotic syndrome (NUP205, p = 9e-7), voltage-gated channels (CACNA1E, p = 1e-6) and chloride channels (CLDN4, p = 4e-6; GABRA2, p = 1e-5), comprising a total of 47 candidate risk loci. Potassium showed mostly association with a gene involved in ion transport and polycystic kidney disease (PKD2L2, p = 1e-7), and a total of 28 candidate risk loci. Sodium showed association with genes implicated in several diseases with kidney involvement such as nephropathy (IMMP2L, P = 1e-7), Bardet-Biedl syndrome (BBSP, p = 1-e6) and ARCS1 (SH3BP2, p = 2e-6), and acting in cell polarity (PARD6G, p = 1e-6) and ion transport (ANO3, p = 3e-6), for a total of 76 candidate risk loci. In addition to these genes, other genes were already reported to be associated with cardiomyopathies, such as ABTB2 in chloride and sodium and MYOT and PRKAG2 in potassium. Conclusion This study showed novel candidate genes that may explain interindividual differences in serum electrolytes. Genes already reported to be associated with kidney abnormalities offer hints of their actual involvement in electrolyte imbalances and related disease. Moreover, associations pointing at cardiac diseases strengthen the involvement of these genes in renal electrolyte abnormalities, being one of the secondary causes of cardiomyopathies. Finally, the identification of risk loci across the three phenotypes opens the opportunity for the development of polygenic risk scores, which may benefit of an increasing number of tested samples to reach genome-wide significant signals and additional cohorts to validate the computed risk model.

Photoluminescence Probes Ion Insertion into Amorphous and Crystalline Regions of Organic Mixed Conductors

AbstractOrganic mixed ionic‐electronic conductors (OMIECs) have emerged as promising materials for a wide range of next‐generation technologies, including bioelectronics and neuromorphic computing. The performance of these materials depends on the transport of ions through the polycrystalline polymer matrix as well as how the distribution of ions and polarons in crystalline and amorphous regions impacts electronic transport. However, it is often challenging to distinguish whether ions enter crystalline or amorphous regions. In this work, steady‐state and time‐resolved photoluminescence (PL) spectroelectrochemistry is used to probe initial ion insertion in crystalline and amorphous regions of the OMIEC material poly(3‐[2‐[2‐(2‐methoxyethoxy)ethoxy]ethyl]thiophene ‐2,5‐diyl) (P3MEEET) as a function of applied voltage. It is found that PL spectroelectrochemistry reports on the initial stages of electrochemical doping through the quenching of PL emission. By distinguishing between amorphous and crystalline contributions to the PL spectrum, ion insertion in crystalline and amorphous regions as a function of voltage is tracked. It is found that PL spectroelectrochemistry is much more sensitive to the initial injection of ions than complementary methods, highlighting its potential as a sensitive tool for interrogating ion injection in OMIECs.