Invitro Study Research Articles

Comparative Evaluation of Debris Expulsion Beyond Apex During Re-root Canal Treatment by Utilizing Two Re-treatment Rotary Files and Two Reciprocating Files: An In-Vitro Study.

This study aimed to assess and compare debris quality expelled beyond the apex during re-treatment using two reciprocating and two re-treatment rotary files. A total of 80 healthy human mandibular premolars excised for orthodontic therapy were selected. Distilled water was used to sterilize the teeth before they were preserved. The canals were widened and coronal access was created so that the F2 ProTaper universal system could be used. For the obturation, we utilized gutta-percha cones and AH plus sealant. All samples were cone-beam computed tomography (CBCT) recorded. Teeth were separated into four groups (n=20); Group 1: ProTaper re-treatment, Group 2: Mtwo re-treatment, Group 3: WaveOne gold, and Group 4: Reciproc. The re-instrumented process included collecting the extruded debris in Eppendorf tubes and then drying it off by evaporating the distilled water. The weight of the tube with debris was subtracted from the weight of the tube without debris to get the dry debris weight. Post-retreatment CBCT was recorded for all samples. Mean apical debris extrusion values were obtained, after which necessary statistical analysis was obtained using SPSS Statistics, version 21 (IBM Corp., Armonk, NY) to obtain the results.A one-way analysis of variance (ANOVA) and the student t-test were utilized for statistical analysis to compare the different experimental groups. Post-hoc Bonferroni tests were used to compare several groups. No statistical difference (p>0.05) was identified in the filler material that was left over across all groups. The reciprocating files discharged more material compared with re-treatment file systems. The Reciproc files expelled more waste than WaveOne gold, ProTaper re-treatment, and Mtwo re-treatment file systems. Reciprocating file systems showed better cleaning efficiencycompared to the re-treatment file systems.

Characterisation and evaluation of physical properties of AH-Plus sealer with and without the incorporation of petasin, pachymic acid, curcumin and shilajit-an invitro study

BackgroundAH Plus, an epoxy resin-based sealer, is widely used in endodontic practice, owing to its good physical properties that confers longstanding dimensional stability and good adhesion to dentin. Nevertheless, its propensity to trigger inflammation, especially in its freshly mixed state, has been extensively documented. Phytochemicals such as Petasin, Pachymic acid, Curcumin, and Shilajit are known for their anti-inflammatory and analgesic effects. This study aimed to analyze and determine the effect of these natural products on the physical properties of AH Plus sealer when incorporated with the sealer.MethodsAH Plus (AHR) sealer was mixed with 10% petasin, 0.75% pachymic, 0.5% and 6%shilajit to obtain AHP, AHA, AHC and AHS in the ratio of 10:1 and 5:1 respectively. Five samples of each material were assessed for setting time, solubility, flow, and dimensional stability in accordance with the ISO 6876:2012 standardization. Sealers were characterized through scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy, X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy. Statistical evaluation involved the Kolmogorov-Smirnov and Shapiro-Wilks tests for normality and the one-way ANOVA test for analysis.ResultsIn this investigation, the characterisation analysis revealed a relatively similar microstructure in all the experimental root canal sealers. All experimental groups, excluding the control group, exhibited an increase in flow ranging from 11.9 to 31.4% at a 10:1 ratio. Similarly, for the 5:1 ratio, the increase ranged from 12.02 to 31.83%. In terms of dimensional stability, all groups at the 10:1 ratio showed a decrease compared to the control group. The addition of natural agents to AHR in 10:1 ratio led to a reduction in setting time by 8.9–31.6%, and at a 5:1 ratio, the reduction ranged from 8.1 to 31.5%. However, regarding solubility, the addition of natural agents did not induce any significant alterations.ConclusionBased on the results of this study, it can be concluded that all tested root canal sealers exhibited properties that met the acceptable criteria outlined in the ISO 6876:2012 standardization.

Coronal leakage of a new temporary restorative material: An invitro study

This invitro study aims to assess the potency of new temporatory restorative material Orafil LC with other temporary restoratives: Zinc oxide eugenol and Cavit G in preventing microleakage during the inter-appointment period of endodontic treatment.Endodontic access cavity was prepared on 60 premolar teeth and restored with 3 different temporary restorative materials in the respective groups. (n=20)The teeth were stored in methylene blue stain and were sectioned to be observed under a compound microscope at 1,2,3 and 7 days to access coronal microleakage and further investigations were under a scanning electron microscope. All the tested materials showed microleakage with maximum leakage in Zinc oxide eugenol followed by Cavit G and Orafil LC. Orafil LC showed the least microleakage.Orafil LC showed least microleakage when compared with other temporary restorative materials used in this study

Influence of limited mouth opening in children on intraoral scanning accuracy: An invitro study.

Although intraoral scanning is highly reliable, little is known about its accuracy in young children with limited mouth-opening ability. To determine the accuracy of intraoral scans based on the degree of mouth opening. To simulate mouth opening in children with primary dentition, three groups (n = 5 per group) were allocated by maximum mouth opening of 30, 37 and 40 mm. After the primary dentition model was connected to a dental phantom, intraoral scanning was performed using iTero and TRIOS4. The scanned files were digitally evaluated. Root mean square values were calculated to assess trueness and precision. iTero showed deviations of three-dimensional trueness of 0.067 ± 0.008, 0.063 ± 0.001 and 0.065 ± 0.005 mm, and TRIOS4 of 0.07 ± 0.002, 0.064 ± 0.003 and 0.066 ± 0.002 mm in the 30, 37 and 40 mm groups, respectively. There were no significant differences in either mouth opening (p > .017) or the intraoral scanners (p > .05). The same statistical results were obtained for precision, with the exception of the 30 mm of mouth opening. Within the limits of this study, limited mouth opening hardly influenced the accuracy of intraoral scanning.

Efficacy of Ultrasonics Versus XP-endo Finisher for Removal of Intracanal Medications with Two Different Vehicles (An In-Vitro Study)

Efficacy of Ultrasonics Versus XP-endo Finisher for Removal of Intracanal Medications with Two Different Vehicles (An In-Vitro Study)

Effectiveness of Sterilization by Microwave Irradiation on Polyvinyl Siloxane Contaminated with Candida Albicans: An Invitro Study

Effectiveness of Sterilization by Microwave Irradiation on Polyvinyl Siloxane Contaminated with Candida Albicans: An Invitro Study

Comparison of Cyclic Fatigue Resistance of Two Different Rotary NiTi Instruments (An In-Vitro Study)

Comparison of Cyclic Fatigue Resistance of Two Different Rotary NiTi Instruments (An In-Vitro Study)

Mechanical stability of posterior implant-supported monolithic zirconia cantilever on titanium-base abutments. An invitro study.

Investigate survival and technical complications of two-unit posterior implant-supported cantilever made of monolithic zirconia on titanium-base abutments (Zr-TiB) vs. porcelain-fused-to-metal on castable gold abutments (PFM-GA) using two different implant connections, internal butt-joint (IBJ) and internal conical (IC). Forty-eight implants (4.3 mm diameter) were divided into four groups (n = 12) to support 2-unit mandibular premolar cantilevers with two different materials (Zr-TiB vs. PFM-GA) and two connection types (IBJ vs. IC). Tested groups were as follows: (1) IBJ/Zr-TiB; (2) IBJ/PFM-GA; (3) IC/Zr-TiB; and (4) IC/PFM-GA. Specimens were thermomechanical aged (1,200,000 cycles, 98 N, 5-55°C) with occlusal axial load on the pontic. Catastrophic and non-catastrophic events were registered, and removal torque values measured before and after aging. Specimens surviving aging were subjected to loading until failure. Survival, total complication rates, torque loss (%), and bending moments were calculated. From 48 specimens, 38 survived aging. Survival rates significantly varied from 16.7% (IC/PFM-GA) to 100% (IBJ/Zr-TiB; IBJ/PFM-GA; IC/Zr-TiB) (p < .01). Internal conical connection revealed significantly higher torque loss (IC/ZrTiB - 67%) compared to internal butt-joint (IBJ/Zr-TiB - 44%; IBJ/PFM-GA - 46%) (p < .01). Bending moments were higher in internal butt-joint connections than in internal conical (p < .05). Two-unit posterior implant-supported cantilever FDPs replacing mandibular premolars composed of monolithic zirconia on titanium-base abutments demonstrated higher mechanical stability compared to porcelain-fused-to-metal on castable gold abutments in this invitro study. The internal conical connection combined with porcelain-fused-to-metal on gold abutments revealed a high number of failures; therefore, their clinical use may be considered cautiously for this indication.

Fracture strength of preformed zirconia crown and CAD-CAM zirconia, ceramic, and hybrid composite crowns for the restoration of primary molars: An invitro study.

Paediatric-preformed zirconia crowns have been associated with several issues, primarily their inability to be crimped and the need for extensive tooth preparation. Additionally, the capacity to adjust the size, shape, and fit of these crowns is very limited. To evaluate and compare the fracture strength of four different types of dental crowns intended for paediatric patients. The fracture resistance of four types of paediatric crowns was evaluated using the universal testing machine; freshly extracted primary molars received one of the following: preformed zirconia crowns, custom-made computer-aided design and computer-aided manufacturing (CAD-CAM) zirconia crowns, custom-made CAD-CAM ceramic crowns, and custom-made CAD-CAM hybrid composite crowns. Data were statistically compared using the Kruskal-Wallis test followed by the Bonferroni test, and the level of significance was set at 5%. Results showed that there was a statistically significant difference among the four groups (p < .001). The highest value of fracture force was observed for the milled zirconia crown and the lowest for the prefabricated zirconia. The implementation of the CAD-CAM digital crown fabrication technique has the potential to address issues associated with preformed crowns in paediatric patients, particularly in terms of fracture resistance.

Corrosion-induced changes in surface properties and roughness of orthodontic wires

This study aimed to investigate the surface free energy and surface roughness (SR) of metallic alloys under the influence of acid solutions. The experiment involved the use of 270 rectangular wire samples measuring 0.019 × 0.025-in. These samples were sourced from 3 different commercial brands: Dentsply GAC, American Orthodontics, and Orthoclassic. This invitro study categorized the samples into 3 groups based on the solutions employed: deionized water, citric acid, and phosphoric acid. Each group consisted of 90 samples, with 30 samples representing each type of alloy-stainless steel, nickel-titanium, and titanium molybdenum alloy (TMA). The wire segments were immersed in their respective solutions for 72 hours at a controlled temperature of 37°C, with continuous orbital agitation at 130 rpm. After the immersion period, the study analyzed both surface free energy and SR. The mean values obtained were subjected to an analysis of variance at a significance level of 5%. All alloys displayed hydrophobic behavior, as indicated by interaction free energy values<0. In acidic environments (phosphoric acid and citric acid), significant differences were observed among different brands and alloys, affecting surface energy and interaction free energy. Variations in SR among metallic alloys included steel with the lowest SR variations, followed by nickel-titanium and TMA. Notably, the TMA alloy stood out with significantly higher surface energy compared with that of the other alloys (P<0.001). In this study, all examined alloys demonstrated a hydrophobic nature, suggesting a limited attraction to water. Notably, TMA exhibited the least hydrophobic behavior among the alloys studied. However, when exposed to citric acid, TMA displayed the most substantial alterations in its surface properties. These results underscored the significance of accounting for the distinctive properties of each alloy and their responses to diverse challenges, such as exposure to acidic solutions, during the selection of orthodontic wires for orthodontics treatment.

Hypoglycemic, anti-inflammatory, and neuroprotective potentials of crude methanolic extract from Acacia nilotica L. - results of an invitro study.

Acacia nilotica L., also known as babul, belonging to the Fabaceae family and the Acacia genus, is typically used for ornamental purposes and also as a medicinal plant found in tropical and subtropical areas. This plant is a rich source of bioactive compounds. The current study aimed to elucidate the hypoglycemic, anti-inflammatory, and neuroprotective potential of A. nilotica's crude methanolic extract. The results of the invitro antidiabetic assay revealed that methanolic extract of A. nilotica inhibited the enzyme α-glucosidase (IC50: 33 μg mL-1) and α-amylase (IC50: 17 μg mL-1) in a dose-dependent manner. While in the anticholinesterase enzyme inhibitory assay, maximum inhibition was shown by the extract against acetylcholinesterase (AChE) (637.01 μg mL-1) and butyrylcholinesterase (BChE) (491.98 μg mL-1), with the highest percent inhibition of 67.54% and 71.50% at 1000 μg mL-1, respectively. This inhibitory potential was lower as compared to the standard drug Galantamine that exhibited 82.43 and 89.50% inhibition at the same concentration, respectively. Moreover, the methanolic extract of A. nilotica also significantly inhibited the activities of cyclooxygenase 2 (COX-2) and 5-lipoxygenase (5-LOX) in a concentration-dependent manner. The percent inhibitory activity of 5-LOX and COX-2 ranged from 42.47% to 71.53% and 43.48% to 75.22%, respectively. Furthermore, in silico, invivo, and clinical investigations must be planned to validate the above-stated bioactivities of A. nilotica.

Effect of implant type on the stability of cantilever fixed dental prostheses: An invitro study.

To simulate the replacement of a premolar with an implant-supported cantilever fixed dental prosthesis (ICFDP) and how the fracture load is affected by implant type, positioning within the zirconia blank, and aging protocol. Seventy-two ICFDPs were designed either within the enamel- or dentin layer of a 4Y-PSZ blank for bone-level and tissue-level titanium-zirconium implants. Fracture load was obtained on the cantilever at baseline (no aging) or after aging in a chewing simulator with the load applied within the implant axis (axial aging) or on the cantilever (12 groups with n = 6). A three-way ANOVA was applied (α = .05). A three-way ANOVA revealed a significant effect on fracture load values of implant type (p = .006) and aging (p < .001) but not for the position within the zirconia blank (p = .847). Fracture load values significantly increased from baseline bone level (608 ± 118 N) and tissue level (880 ± 293 N) when the implants were aged axially, with higher values for tissue level (1065 ± 182 N) than bone level (797 ± 113 N) (p < .001). However, when the force was applied to the cantilever, fracture load values decreased significantly for tissue-level (493 ± 70 N), while values for bone-level implants remained stable (690 ± 135 N). For ICFDPs, the use of bone-level implants is reasonable as catastrophic failures are likely to be restricted to the restoration, whereas with tissue-level implants, the transmucosal portion of the implant is susceptible to deformation, making repair more difficult.

Influence of Bile Acids on Clindamycin Hydrochloride Skin Permeability: InVitro and InSilico Preliminary Study.

Topical clindamycin formulations are widely used in clinical practice, but poor bioavailability and restricted skin penetration considerably limit their therapeutic efficacy. Penetration enhancement represents a promising and rational strategy to overcome the drawbacks of conventional topical pharmaceutical formulations. We aim to assess the influence of cholic acid (CA) and deoxycholic acid (DCA) on the permeability of clindamycin hydrochloride by performing the in vitro skin parallel artificial membrane permeability assay (skin-PAMPA) at two relevant pH values (5.5 and 6.5) and the interactions of tested substances with skin ATP-binding cassette (ABC) transporters in silico. After the incubation period, the clindamycin hydrochloride concentrations in both compartments were determined spectrophotometrically, and the apparent permeability coefficients (Papp) were calculated. Vienna LiverTox web service was used to predict the interactions of clindamycin and bile acids with potential drug transporters located in human skin. Both CA and DCA at the highest studied concentration of 100μM in the tested solutions increased the skin-PAMPA membrane permeability of clindamycin hydrochloride. This effect was more pronounced for CA and at a higher studied pH value of 6.5, which is characteristic of most dermatological indications treated with topical clindamycin preparations. Clindamycin transport may also be mediated by ABC transporters located in skin and facilitated in the presence of bile acids. The results of this study provide a solid foundation for further research directed at the improvement of topical formulations using bile acids as penetration-enhancing excipients, as well as the therapeutic efficacy of clindamycin hydrochloride.

Antibacterial Efficacy of Mineral Trioxide Aggregate, Bioactive Glass and Epoxy-Resin Based Sealer: An In-Vitro Interventional Study.

The aim and objective of this in vitro study was to evaluate the antibacterial efficacy of mineral trioxide aggregate, bioactive glass sealer, and epoxy-resin-based sealer. In the present study, 22 Mueller Hinton agar (MH agar) plates were employed and equally divided into two groups. Three holes were made by removal of agar at equidistant points and filled with root canal sealers. The strains of the bacteria used in this study were S. aureus (ATCC 6538) and C. albicans (ATCC 10231) and were divided into two groups and root canal sealers were divided into three subgroups: mineral trioxide aggregate (MTA) fillapex Sealer, Nishika Bioactive Glass sealer, and Syntex Epoxy Resin base sealer. For Staphylococcus aureus, peptone water was placed in a 2 mL test tube and bacteria were extracted from blood agar plates using a nichrome wire loop and poured into the peptone water-containing test tube and incubated for 2 hours and for C. albicans, fungi were grown at 37°C for 24 hours in MH Broth and seeded into MH agar to produce turbidity of 0.5 on the McFarland scale, which corresponds to a concentration of 108 CFU/mL. This MH broth was used as a second layer. The seeded agar was then added over the plates immediately after the insertion of sealer cement. After incubation, the diameters of zones of inhibition around the plates were measured. The results of this study showed that the highest inhibition was recorded in Syntex sealer against Staphylococcus aureus followed by MTA fillapex sealer and Nishika sealer, whereas MTA fillapex showed the highest inhibition against C. albicans followed by Syntex sealer and Nishika sealer. Syntex sealer exhibits better antibacterial efficacy against Staphylococcus aureus and MTA fillapex exhibit better antibacterial efficacy against C. albicans.

Comparative evaluation of antifungal activity of Sodium Hypochlorite, Calcium Hypochlorite and modified Salt Solution associated with passive ultrasonic irrigation against Candida albicans - An In-Vitro study.

The study evaluated the antifungal activity of sodium hypochlorite (NaOCl), calcium hypochlorite (Ca(OCl)2), and modified salt solution (MSS) assisted with passive ultrasonic irrigation against Candida albicans. One hundred and thirty-six single-rooted premolars were decoronated and enlarged up to a file #45, autoclaved, inoculated with C. albicans, and incubated for 72 h. The samples were randomly distributed into eight groups (n = 17) according to the protocol for decontamination G1: No treatment, G2: Distilled water (DW), G3: 2.5% NaOCl, G4: 2.5% NaOCl + ultrasonic activation (US), G5: 2.5% Ca(OCl)2, G6: 2.5% Ca(OCl)2 + US, G7: MSS, G8: MSS + US. Microbiological testing (Colony forming Unit [CFU] counting) was performed before and after the treatment. Data were subjected to the one-way analysis of variance followed by the Tukey's post hoc test (P < 0.05). Groups 1 and 2 showed the highest mean contamination (5.41 and 4.31 log10 CFU/mL, respectively), which was statistically different from all the other groups (P < 0.001). G4 showed the lowest mean contamination (0.24 log10 CFU/mL) with statistically significant value (P < 0.001). 2.5% NaOCl with ultrasonic activation can aid in significant fungal reduction. Ultrasonic activation of 2.5% NaOCl, 2.5% Ca(OCl)2, and MSS was also found to have improved antifungal activity against C. albicans.

Polygalacic acid attenuates cognitive impairment by regulating inflammation through PPARγ/NF-κB signaling pathway.

We aimed to explore the role and molecular mechanism of polygalacic acid (PA) extracted from traditional Chinese medicine Polygala tenuifolia in the treatment of Alzheimer's disease (AD). The network pharmacology analysis was used to predict the potential targets and pathways of PA. Molecular docking was applied to analyze the combination between PA and core targets. Aβ42 oligomer-induced AD mice model and microglia were used to detect the effect of PA on the release of pro-inflammatory mediators and its further mechanism. In addition, a co-culture system of microglia and neuronal cells was constructed to assess the effect of PA on activating microglia-mediated neuronal apoptosis. We predict that PA might regulate inflammation by targeting PPARγ-mediated pathways by using network pharmacology. Invivo study, PA could attenuate cognitive deficits and inhibit the expression levels of inflammation-related factors. Invitro study, PA can also decrease the production of activated microglia-mediated inflammatory cytokines and reduce the apoptosis of N2a neuronal cells. PPARγ inhibitor GW9662 inversed the neuroprotective effect of PA. Both invivo and invitro studies showed PA might attenuate the inflammation through the PPARγ/NF-κB pathway. PA is expected to provide a valuable candidate for new drug development for AD in the future.

The Influence of Minimally Invasive Access Cavities on the Cleaning Ability of Primary Infected Root Canals: An in-Vitro Study

The Influence of Minimally Invasive Access Cavities on the Cleaning Ability of Primary Infected Root Canals: An in-Vitro Study

An invitro study on the effects of photobiomodulation by diode lasers (red, infrared, and red-infrared combination) on periodontal ligament mesenchymal stem cells treated with bisphosphonates.

This study evaluated the effect of photobiomodulation therapy (PBMT) using 660 and 808 nm diode lasers (individual and in combination) on periodontal ligament mesenchymal stem cells (PDLSCs) in the presence of zoledronic acid (ZA). PDLSCs were cultured for 48 h in DMEM complete medium containing 5 μM ZA. PBMT was done three times with a 24-h interval in groups 1 (660 nm, 5 J/cm2), 2 (880 nm, 3 J/cm2), and 3 (660 + 808 nm) either in normal or ZA-treated culture medium. Control groups did not receive PBMT. Twenty-four hours post-irradiation, cell proliferation and expression of RANKL and OPG were assessed using MTT and real-time PCR tests, respectively. The results showed a significant decrease in cell viability in ZA-treated cells (p < 0.001). Additionally, ZA induced the expression of OPG (p = 0.03) while reducing RANKL (p < 0.001). Cell proliferation was significantly increased in 808 and 660 + 808 nm groups. Moreover, all PBMT groups could significantly increase and decrease the RANKL and OPG, respectively, in the presence of ZA (all p < 0.001). A combination of 660 + 808 nm showed the highest effects on both genes. In conclusion, it seems that PBMT can modulate the effects of ZA by inducing PDLSC proliferation and increasing RANKL-to-OPG gene expression ratio.

Comparison of Compressive Strength and Microleakage of Zirconia Reinforced Flowable Composite and Zirconia Reinforced GIC in Class V Cavities - An In-Vitro Study

Comparison of Compressive Strength and Microleakage of Zirconia Reinforced Flowable Composite and Zirconia Reinforced GIC in Class V Cavities - An In-Vitro Study

To Evaluate and Compare the Antibacterial Efficacy of Two Sealing Agents at the Implant - Abutment Interface - An In-Vitro Study

To Evaluate and Compare the Antibacterial Efficacy of Two Sealing Agents at the Implant - Abutment Interface - An In-Vitro Study