Fundamental Physics Research Articles

Spontaneous Particle Ordering, Sorting, and Assembly on Soap Films.

Soap bubbles exhibit abundant fascinating phenomena throughout the entire life of evolution with different fundamental physics governing them. Nevertheless, the complicated dynamics of small objects in soap films are still unrevealed. Here, we report the first observation of spontaneous particle ordering in a complicated galaxy of soap films without any external energy. The balance of interfacial tension at two liquid-gas interfaces is theoretically predicted to govern belted wetted particles (BWPs) traveling along a specified path spontaneously. Such spontaneous particle path-finding is found to depend on the particle size and hydrophilic properties. Spontaneous particle sorting is directly realized via these discrete and distinctive paths for different particles. The deformation of the soap membrane facilitates 1D/2D particle organization along the path. This observation represents the discovery of a new spontaneous order phenomenon in soap film systems and provides a new energy-free approach for particle separation and soft colloidal crystal assembly.

In Our Mind’s Eye: Thinkable and Unthinkable, and Classical and Quantum in Fundamental Physics, with Schrödinger’s Cat Experiment

In Our Mind’s Eye: Thinkable and Unthinkable, and Classical and Quantum in Fundamental Physics, with Schrödinger’s Cat Experiment

Integrating K+ into Eu and Tb doped GdCa4O(BO3)3: A dual study on photoluminescence and structure

In this study, we investigate the structural and photoluminescence (PL) properties of rare-earth-doped GdCa4O(BO3)3 (GdCOB) phosphors, specifically focusing on the spectral behaviour induced by doping with Eu³⁺ and Tb³⁺ ions. The powder X-ray diffraction (XRD) spectra confirm the formation of a monoclinic phase. The XRD data were also refined by a Rietveld refinement method. The existence of B, O, Ca, Gd, Tb, Eu and K elements was verified by EDS spectra. We introduce a detailed examination of the charge compensation process using Kröger-Vink notation to clarify the mechanisms essential for tailoring the optical properties of the phosphors. The PL excitation spectrum of GdCOB:Eu3+, monitored at 611 nm, reveals sharp excitation peaks at 319, 361, 380, and 392 nm, corresponding to 7F0→5H3, 7F0→5D4, 7F0→7F0, and 7F0→5L6 transitions, respectively. The PL spectrum under excitation of 392 nm exhibits that phosphors doped with Eu3+ a significant red emission at 611 nm, which is attributed to the 5D₀→7F₂ transition. This emission intensity is particularly enhanced at non-centrosymmetric sites of the Eu³⁺ ions. Similarly, the PL excitation spectrum of GdCOB:Tb3+, monitored at 552 nm, displays distinct excitation peaks at 316, 341, 353, and 379 nm, which correspond to the transitions 7F₆→5D₀, 7 F₆→5L₇, 7F₆→5D₂, and 7F₆→5D₃, respectively. Tb³⁺-doped phosphors display a bright green emission, with a dominant peak at 552 nm, resulting from the 5D₄→7F₅ transition. Additionally, the introduction of K⁺ ions as co-dopants results in modifications to the local environments of Eu³⁺ and Tb³⁺ ions. These changes allow for fine-tuning of the emission peaks, significantly enhancing the luminescent output of the phosphors. Optimal doping concentrations of 5 mol% for Eu³⁺ and 1 mol% for Tb³⁺ enhance luminescent intensity and prevent concentration quenching. This phenomenon, often resulting in reduced PL intensity at higher dopant levels, is primarily due to dipole-dipole interactions, consistent with Dexter's theory of energy transfer. Strategic modulation of doping concentrations, coupled with a deep understanding of energy transfer mechanisms are critical for the development of advanced luminescent materials Our analysis of the Commission de l′Eclairage (CIE) chromaticity coordinates reveals enhanced energy transfer dynamics in rare-earth-doped borates, facilitating the tuning of luminescent properties. These results not only deepen our understanding of the fundamental physics governing such phosphors but also open pathways for the development of optoelectronic applications requiring consistent color output, such as LED technologies and solid-state lighting.

Coupled Electronic and Magnonic Topological States in Two-Dimensional Ferromagnets.

Magnetic materials offer a fertile playground for fundamental physics discovery, with not only electronic but also magnonic topological states intensively explored. However, one natural material with both electronic and magnonic nontrivial topologies is still unknown. Here, we demonstrate the coexistence of first-order topological magnon insulators (TMIs) and electronic second-order topological insulators (SOTIs) in 2D honeycomb ferromagnets, giving rise to the nontrivial corner states being connected by the charge-free magnonic edge states. We show that, with symmetry, the phase factor ± ϕ caused by the next nearest-neighbor Dzyaloshinskii-Moriya interaction breaks the pseudo-spin time-reversal symmetry , which leads to the split of magnon bands, i.e., the emergence of TMIs with a nonzero Chern number of , in experimentally feasible candidates of MoI3, CrSiTe3, and CrGeTe3 monolayers. Moreover, protected by the symmetry, the electronic SOTIs characterized by nontrivial corner states are obtained, bridging the topological aspect of fermions and bosons with a high possibility of innovative applications in spintronics devices.

Balanced travelling-wave parametric amplifiers for practical applications

Abstract The development of superconducting travelling-wave parametric amplifiers (TWPAs) over the past decade has highlighted their potential as low-noise amplifiers for use in fundamental physics experiments and industrial applications. However, practical challenges, including signal-idler contamination, complex pump injection and cancellation, impedance mismatch, and the reciprocal nature of the device, have made it challenging to deploy TWPAs in real-world applications. In this paper, we introduce an innovative solution to these issues through phase-controlled balanced-TWPA architectures. These architectures involve placing two TWPAs in parallel between a pair of broadband couplers. By carefully controlling the phases of the tones propagating along the TWPAs, we can effectively separate the signal and idler tones, as well as the pump(s), using a straightforward injection and cancellation mechanism. The balanced-TWPA architecture offers versatility and flexibility, as it can be reconfigured either intrinsically or externally to suit different application needs. In this manuscript, we provide a comprehensive discussion of the working principles of the balanced-TWPA, including various configurations designed to meet diverse application requirements. We also present the expected gain-bandwidth products in comparison to traditional TWPAs and conduct tolerance analysis to demonstrate the feasibility and advantages of the balanced-TWPA architecture. By addressing the practical challenges associated with TWPAs, the balanced-TWPA architecture represents a promising advancement in the field, offering a more practical and adaptable solution for a wide range of applications.

Distinguishability of binary extreme-mass-ratio inspirals in low frequency band

The inspiral of compact stellar objects into massive black holes are one of the main astrophysical sources for the Laser Interferometer Space Antenna (LISA) and Taiji. These extreme-mass-ratio inspirals (EMRIs) have great potential for cosmology and fundamental physics. A binary extreme-mass-ratio inspiral (b-EMRI) describes the case where binary black holes (BBHs) are captured by a supermassive black hole. The b-EMRIs serve as multi-band gravitational wave sources and provide insights into the dynamics of nuclei and tests of general relativity. However, if the b-EMRIs can be distinguished from the normal EMRIs or not is still not clear. In this work, with a few of assumptions, and using the Teukolsky equation, we calculate the approximate gravitational waves of b-EMRIs and assess their detectability by space-based detectors. We also decouple the secondary object information from the Teukolsky equation, enabling us to calculate the energy fluxes and generate the waveforms more conveniently. Variations in the quadrupole of the binary result in small but non-negligible changes in energy fluxes and waveforms, making it possible to distinguish b-EMRI signals with data analysis. This opens up the potential of using b-EMRIs to test gravity theories and for further astrophysical studies.

Imaging Thermally Fluctuating Néel Vectors in van der Waals Antiferromagnet NiPS3.

Studying antiferromagnetic domains is essential for fundamental physics and potential spintronics applications. Despite their importance, few systematic studies have been performed on antiferromagnet (AFM) domains with high spatial resolution in van der Waals (vdW) materials, and direct probing of the Néel vectors remains challenging. In this work, we found multidomain states in the vdW AFM NiPS3, a material extensively investigated for its unique magnetic exciton. We employed photoemission electron microscopy combined with the X-ray magnetic linear dichroism (XMLD-PEEM) to image the NiPS3's magnetic structure. The nanometer-spatial resolution of XMLD-PEEM allows us to determine local Néel vector orientations and discover thermally fluctuating Néel vectors that are independent of the crystal symmetry even at 65 K, well below the TN of 155 K. We demonstrate that an in-plane orbital moment of the Ni ion is responsible for the weak magnetocrystalline anisotropy. The observed thermal fluctuations of the antiferromagnetic domains may explain the broadening of magnetic exciton peaks at higher temperatures.

Backaction-evading receivers with magnetomechanical and electromechanical sensors

Today's mechanical sensors are capable of detecting extremely weak perturbations while operating near the standard quantum limit. However, further improvements can be made in both sensitivity and bandwidth when we reduce the noise originating from the process of measurement itself—the quantum-mechanical backaction of measurement—and go below this ‘standard’ limit, possibly approaching the Heisenberg limit. One of the ways to eliminate this noise is by measuring a quantum nondemolition variable such as the momentum in a free-particle system. Here, we propose and characterize theoretical models for direct velocity measurement that utilize traditional electric and magnetic transducer designs to generate a signal while enabling this backaction evasion. We consider the general readout of this signal via electric or magnetic field sensing by creating toy models analogous to the standard optomechanical position-sensing problem, thereby facilitating the assessment of measurement-added noise. Using simple models that characterize a wide range of transducers, we find that the choice of readout scheme—voltage or current—for each mechanical detector configuration implies access to either the position or velocity of the mechanical subsystem. This in turn suggests a path forward for key fundamental physics experiments such as the direct detection of dark matter particles. Published by the American Physical Society 2024

Van der Waals Engineering of Charge Density Waves in One-Dimensional Nb6Te6 Nanowires.

One-dimensional (1D) systems have played a crucial role in the development of fundamental physics and practical applications. Recently, transition metal monochalcogenide (TMM) wires based on molybdenum (Mo) and tungsten (W) have emerged as promising platforms for investigating 1D physics in pure van der Waals (vdW) platforms. Here, we report on the bottom-up fabrication of Nb6Te6 wires down to the single-wire limit. The unique properties of Nb6Te6 single wire enable the realization of 1D charge density wave (CDW) phases in an isolated single TMM wire. Moreover, we revealed the appealing regulation of 1D CDW orders by van der Waals interactions at either the 1D-2D interface (i.e., rotation of a single wire along its wire axis) or the 1D-1D interface. Two rotation angles (30° and 0°) give rise to 3 × 1 and zigzag chain CDW morphologies, respectively, which exhibit pronounced differences in atomic displacement by a factor of 2. The interwire vdW coupling overwhelms its counterpart at the 1D-2D interface, thus locking the rotation angle (at 0°) as well as the interwire atomic registries. In contrast, interestingly, the phases of the charge oscillations are independent of the adjacent wires. The ability to tailor 1D charge orders provides a crucial addition to the toll set of vdW integrations beyond two-dimensional materials.

Atomic Quantum Technologies for Quantum Matter and Fundamental Physics Applications

Physics is living an era of unprecedented cross-fertilization among the different areas of science. In this perspective review, we discuss the manifold impact that state-of-the-art cold and ultracold-atomic platforms can have in fundamental and applied science through the development of platforms for quantum simulation, computation, metrology and sensing. We illustrate how the engineering of table-top experiments with atom technologies is engendering applications to understand problems in condensed matter and fundamental physics, cosmology and astrophysics, unveil foundational aspects of quantum mechanics, and advance quantum chemistry and the emerging field of quantum biology. In this journey, we take the perspective of two main approaches, i.e., creating quantum analogues and building quantum simulators, highlighting that independently of the ultimate goal of a universal quantum computer to be met, the remarkable transformative effects of these achievements remain unchanged. We wish to convey three main messages. First, this atom-based quantum technology enterprise is signing a new era in the way quantum technologies are used for fundamental science, even beyond the advancement of knowledge, which is characterised by truly cross-disciplinary research, extended interplay between theoretical and experimental thinking, and intersectoral approach. Second, quantum many-body physics is unavoidably taking center stage in frontier’s science. Third, quantum science and technology progress will have capillary impact on society, meaning this effect is not confined to isolated or highly specialized areas of knowledge, but is expected to reach and have a pervasive influence on a broad range of society aspects: while this happens, the adoption of a responsible research and innovation approach to quantum technologies is mandatory, to accompany citizens in building awareness and future scaffolding. Following on all the above reflections, this perspective review is thus aimed at scientists active or interested in interdisciplinary research, providing the reader with an overview of the current status of these wide fields of research where cold and ultracold-atomic platforms play a vital role in their description and simulation.

Microwave analogy of Förster resonance energy transfer and effect of finite antenna length

The near-field interaction between quantum emitters, governed by Förster resonance energy transfer (FRET), plays a pivotal role in nanoscale energy transfer mechanisms. However, FRET measurements in the optical regime are challenging as they require nanoscale control of the position and orientation of the emitters. To overcome these challenges, microwave measurements were proposed for enhanced spatial resolution and precise orientation control. However, unlike in optical systems for which the dipole can be taken to be infinitesimal in size, the finite size of microwave antennas can affect energy transfer measurements, especially at short distances. This highlights the necessity to consider the finite antenna length to obtain accurate results. In this study, we advance the understanding of dipole–dipole energy transfer in the microwave regime by developing an analytical model that explicitly considers finite antennas. Unlike previous works, our model calculates the mutual impedance of finite-length thin-wire dipole antennas without assuming a uniform current distribution. We validate our analytical model through experiments investigating energy transfer between antennas placed adjacent to a perfect electric conductor mirror. This allows us to provide clear guidelines for designing microwave experiments, distinguishing conditions where finite-size effects can be neglected and where they must be taken into account. Our study not only contributes to the fundamental physics of energy transfer but also opens avenues for microwave antenna impedance-based measurements to complement optical FRET experiments and quantitatively explore dipole–dipole energy transfer in a wider range of conditions.

Essay: Quantum Sensing with Atomic, Molecular, and Optical Platforms for Fundamental Physics

Essay: Quantum Sensing with Atomic, Molecular, and Optical Platforms for Fundamental Physics

Spectral solutions for fractional Klein–Gordon models of distributed order

The Klein–Gordon equation is a fundamental theoretical physics concept, governing the behavior of relativistic quantum particles with spin-zero. Its numerical solution is crucial in fields like quantum field theory, particle physics, and cosmology. The study explores numerical methodologies for solving this equation, highlighting their significance and challenges. This study uses the collocation method to approximate fractional Klein–Gordon models of distributed order based on Shifted Jacobi orthogonal polynomials and Shifted fractional order Jacobi orthogonal functions. While, the distributed term (integral term) was treat using Legendre–Gauss–Lobatto quadrature. It assesses residuals through finite expansion and yields accurate numerical results. The method is more factual and fair when initial and boundary conditions are enforced. Numerical simulations are presented to demonstrate the method’s accuracy, particularly in fractional Klein–Gordon models of distributed order. Furthermore, we offer a few numerical test scenarios to show that the method is able to maintain the non-smooth solution of the underlying issue.

Excitons in confined molecular aggregates

AbstractOrganic optoelectronic materials have attracted extensive attention in the past decades due to their wide applications in organic light‐emitting diodes (OLEDs), organic photovoltaics (OPVs), photocatalysis, etc. Significant advancements have been obtained in the material designs based on the insight into the fundamental physics of exciton related to molecular stacking patterns in solid/condensed states. The exciton characteristics and behaviors are not only a starting point for studying photophysical and photochemical processes on a microscopic level, but also a crucial point in determining the optoelectronic properties of macroscopic aggregates. This review summarizes the historic development of exciton models, accompanied by the discoveries of special molecular stacking patterns (H‐/J‐/X‐/M‐aggregates), and the competitive de‐excitation pathways of excitons including fluorescence, energy transfer, singlet fission, excimer formation and symmetry‐breaking charge separation in the confined aggregate structures. Additionally, it highlights the capabilities of a correlation between molecular stacking modes and exciton behaviors, which provides new insights and perspectives for optimizing exciton character and behavior through the modulation of molecular arrangement in aggregate states, thereby enhancing the performance of optoelectronic materials.

Dark matter searches at accelerators

The understanding of the nature of dark matter is one of the most pressing questions begging for an answer in fundamental physics today. In this contribution we will review the searches performed recently at accelerators, in particular the ones at the Large Hadron Collider.

Three-dimensional numerical modeling of the temporal evolution of backward erosion piping

Backward erosion piping (BEP) is a complex degradation mechanism in geotechnical flood protection infrastructure (GFPI) that is still relatively less understood, particularly when considering its time-dependent features. This manuscript presents a novel dual random lattice modeling approach for three-dimensional simulation of BEP, with a focus on its evolution over time. The key novelty of this presented framework is twofold: (1) we propose and incorporate a novel constitutive relationship for computation of time-dependent soil erosion based on the theory of rate processes, and (2) we devise an algorithm for calculation of coupled degradation of the dual lattices for accurate computation of 3-D hydraulic gradients. The constitutive relationship was developed from fundamental granular physics, and brings the potential to provide deeper fundamental physical understanding of the phenomenon. The capabilities of the modeling framework are investigated by comparison with available laboratory experiments which illustrates good agreement in the spatial advancement of piping erosion, pipe progression speeds, as well as the evolution of local gradients. To the best knowledge of the authors, the presented model is the first to be able to capture all of the aforementioned features when simulating BEP.

Investigating peer recognition across an introductory physics sequence: Do first impressions last?

Investigating peer recognition across an introductory physics sequence: Do first impressions last?

Efficient guiding and focusing of intense laser pulse using periodic thin slits

Slits have been widely used in laser–plasma interactions as plasma optical components for generating high-harmonic light and controlling laser-driven particle beams. Here, we propose and demonstrate that periodic thin slits can be regarded as a new breed of optical elements for efficient focusing and guiding of intense laser pulse. The fundamental physics of intense laser interaction with thin slits is studied, and it is revealed that relativistic effects can lead to enhanced laser focusing far beyond the pure diffractive focusing regime. In addition, the interaction of an intense laser pulse with periodic thin slits makes it feasible to achieve multifold enhancement in both laser intensity and energy transfer efficiency compared with conventional waveguides. These results provide a novel method for manipulating ultra-intense laser pulses and should be of interest for many laser-based applications.

Optical trapping-enhanced probes designed by a deep learning approach

Realizing optical trapping enhancement is crucial in biomedicine, fundamental physics, and precision measurement. Taking the metamaterials with artificially engineered permittivity as photonic force probes in optical tweezers will offer unprecedented opportunities for optical trap enhancement. However, it usually involves multi-parameter optimization and requires lengthy calculations; thereby few studies remain despite decades of research on optical tweezers. Here, we introduce a deep learning (DL) model to attack this problem. The DL model can efficiently predict the maximum axial optical stiffness of Si/Si3N4 (SSN) multilayer metamaterial nanoparticles and reduce the design duration by about one order of magnitude. We experimentally demonstrate that the designed SSN nanoparticles show more than twofold and fivefold improvement in the lateral (k x and k y ) and the axial (k z ) optical trap stiffness on the high refractive index amorphous TiO2 microsphere. Incorporating the DL model in optical manipulation systems will expedite the design and optimization processes, providing a means for developing various photonic force probes with specialized functional behaviors.

Floquet engineering of axion and high-Chern number phases in a topological insulator under illumination

Quantum anomalous Hall, high-Chern number, and axion phases in topological insulators are characterized by its Chern invariant C (respectively, C=1, integer C>1, and C=0 with half-quantized Hall conductance of opposite signs on top and bottom surfaces). They are of recent interest because of novel fundamental physics and prospective applications, but identifying and controlling these phases has been challenging in practice. Here we show that these states can be created and switched between in thin films of Bi_22Se_33 by Floquet engineering, using irradiation by circularly polarized light. We present the calculated phase diagrams of encountered topological phases in Bi_22Se_33, as a function of wavelength and amplitude of light, as well as sample thickness, after properly taking into account the penetration depth of light and the variation of the gap in the surface states. These findings open pathways towards energy-efficient optoelectronics, advanced sensing, quantum information processing and metrology.