Intramolecular Hydrogen Bond Research Articles

Antioxidant properties of catechin and its 3′O-α-glucoside: Insights from computational chemistry calculations

Density functional theory (DFT) calculations were used to investigate the conformational landscape of catechin and one of its main glucoside derivative (catechin-3′ O- α −glucopyranoside), and to determine the corresponding antioxidant properties. These investigations were carried out in benzene and water using the SMD universal continuum solvation model. Both properties were found to be significantly affected. The structures are characterized in both solvents by strong intramolecular hydrogen bonds (IMHB). In an apolar environment, Hydrogen Atom Transfer (HAT) is by far favored whereas in water the Sequential Proton Loss Electron Transfer (SPLET) mechanism is strongly preferred. In benzene, the catechin fragment has the best antioxidant character (from 27 kJ/mole) whereas in polar surroundings, the glucoside derivative has a slightly better antiradical activity (from 5 kJ/mole). Our results confirm the key role of the 3′-OH and 4′-OH groups of the catechole ring in these properties.

Highly Stable Silicon Anode Enabled by a Water-Soluble Tannic Acid Functionalized Dual-Network Binder.

Silicon (Si), a high-capacity electrode material, is crucial for achieving high-energy-density lithium-ion batteries. However, Si suffers from poor cycling stability due to its significant volume changes during operation. In this work, a tannic acid functionalized aqueous dual-network binder with an intramolecular tannic acid functionalized network has been synthesized, which is composed of covalent-cross-linked polyamide and ionic-cross-linked alginate (Alg(Ni)-PAM-TA), and employed as an advanced binder for stabilizing Si anodes. The resultant Alg(Ni)-PAM-TA binder, incorporating diverse functional groups including amide, carboxylic acid, and dynamic hydrogen bonds, can easily interact with both Si nanoparticles and the Cu foil, thereby facilitating the formation of a highly resilient network characterized by exceptional adhesion strength. Moreover, molecular dynamics (MD) simulations indicate that the Alg(Ni)-PAM-TA network shows an increased intramolecular hydrogen bond number with increasing concentration of TA and a decreased intramolecular hydrogen bond between PAM and Alg as a result of the aggregation behavior of tannic acids themselves. Consequently, the binder significantly enhances the Si electrode's integrity throughout repeated charge/discharge cycles. At a current density of 0.84 A g-1, the Si electrode retains a capacity of 1863.4 mAh g-1 after 200 cycles. This aqueous binder functionalized with the intramolecular network via the incorporation of TA molecules holds great promise for the development of high-energy-density lithium-ion batteries.

Synergetic effects of inter- and intramolecular hydrogen bonding interactions in XC5H3HC = Y···HO···H2O2 complexes (X = N, P, As and Sb; Y = O, S and NH): the role of aromaticity and exchange interactions

ABSTRACT Intramolecular hydrogen bonding (IHB) interactions were considered in XC5H3HC = Y···HO molecules which include OH···Y unit (Y = O, S and NH) and heteroatom X (X = N, P, As and Sb). Alteration of heteroatoms X in para position causes a change of properties of electron charge densities on these molecules and influences on strength of the IHB interactions. The aromaticity of the ring A (involving IHB interaction) and ring B (involving heteroatoms X) of XC5H3HC = Y···HO molecules was calculated using para-delocalisation index (PDI). Results reveal that the change of X from N to Sb is followed by the decrease in aromaticity of the mentioned rings. However, the strength of the IHB interactions increases during the change of X. Moreover, IHB energies were estimated using some computational methods and a viewpoint based on the properties of ring critical points (RCPs). The IHB energies obtained using a viewpoint based on the properties of RCPs have a better relationship with hydrogen bonding descriptors. Also, intermolecular hydrogen bond (HB) interactions of hydrogen peroxide with the close and open forms of the XC5H3HC = Y···HO molecules were considered. Cooperative effects of the HB and IHB interactions are revealed. Moreover, energy decomposition analysis (EDA) highlights the role of exchange interactions on the stability of the XC5H3HC = Y···HO···H2O2 complexes.

Enhancing Light-Emitting Efficiency of Blue Through-Space Charge Transfer Emitters via Fixing Configuration Induced by Intramolecular Hydrogen Bonding.

Closely aligned configuration of the donor (D) and acceptor (A) is crucial for the light-emitting efficiency of thermally activated delayed fluorescence (TADF) materials with through-space charge transfer (TSCT) characteristics. However, precisely controlling the D-A distance of blue TSCT-TADF emitters is still challenging. Herein, an extra donor (D*) located on the side of the primary donor (D) is introduced to construct the hydrogen bonding with A and thus modulate the distance of D and A units to prepare high-efficiency blue TSCT emitters. The obtained "V"-shaped TSCT emitter presents a minimal D-A distance of 2.890 Å with a highly parallel D-A configuration. As a result, a high rate of radiative decay (>107 s-1) and photoluminescence quantum yield (nearly 90%) are achieved. The corresponding blue organic light-emitting diodes show maximum external quantum efficiencies (EQEmax) of 27.9% with a Commission Internationale de L'Eclairage (CIE) coordinate of (0.16, 0.21), which is the highest device efficiency of fluorene-based blue TSCT-TADF emitters. In addition, the TSCT-TADF emitter-sensitized OLEDs also achieve a high EQEmax of 29.3% with a CIE coordinate of (0.12, 0.16) and a narrow emission.

Precise Regulation on the Bond Dissociation Energy of Exocyclic C-N Bonds in Various N-Heterocycle Electron Donors via Machine Learning.

Heterocycles with saturated N atoms (HetSNs) are widely used electron donors in organic light-emitting diode (OLED) materials. Their relatively low bond dissociation energy (BDE) of exocyclic C-N bonds has been closely related to material intrinsic stability and even device lifetime. Thus, it is imperative to realize fast prediction and precise regulation of those C-N BDEs, which demands a deep understanding of the relationship between the molecular structure and BDE. Herein, via machine learning (ML), we rapidly and accurately predicted C-N BDEs in various HetSNs and found that five-membered HetSNs (5-HetSNs) have much higher BDEs than almost all 6-HetSNs, except emerging boron-N blocks. Thorough analysis disclosed that high aromaticity is the foremost factor accounting for the high BDE of 5-HetSNs, and introducing intramolecular hydrogen-bond or electron-withdrawing moieties could also increase BDE. Importantly, the ML models performed well in various realistic OLED materials, showing great potential in characterizing material intrinsic stability for high-throughput virtual-screening and material design efforts.

Positive profile of natural small molecule organic matters on emerging antivirus pharmaceutical elimination in advance reduction process: A deep dive into the photosensitive mechanism of triplet excited state compounds

Natural small molecular organic matter (NSOM), ubiquitous in natural waters and distinct from humic acid or fulvic acid, is a special type of dissolved organic matter (DOM) which is characterized as strong photosensitivity and simple molecular structure. However, little study had been directed on the role of NSOM in eliminating emerging contaminants in advanced reduction process (ARP). This study took three small molecular isomeric organic acids (p−hydroxybenzoic acid, pHBA; salicylic acid, SA; m−hydroxybenzoic acid, mHBA) as the representative substances of NSOM to explore these mechanisms on promoting Ribavirin (RBV, an anti COVID−19 medicine) degradation in ultraviolet activated sulfite (UV/Sulfite) process. The results demonstrated that the observed degradation rate constant of RBV (kobs-RBV) was 7.56 × 10−6 s−1 in UV/Sulfite process, indicating that hydrated electron (eaq−) from UV/Sulfite process could not effectively degrade RBV, while it increased by 178 and 38 times when pHBA and SA were introduced into UV/Sulfite process respectively, suggesting that pHBA and SA strongly promoted RBV degradation while mHBA had no promotion on RBV abatement in UV/Sulfite process. Transient absorption spectra and reactive intermediates scavenging experiment indicated that the triplet excited state pHBA and SA (3pHBA* and 3SA*) contributed to the degradation of RBV through non−radical process. Notably, eaq− played the role of key initiator in transforming pHBA and SA into their triplet states. The difference of kobs-RBV in UV/Sulfite/pHBA and UV/Sulfite/SA process was attributed to different generation pathways of 3pHBA* and 3SA* (high molar absorptivity at the wavelength of 254 nm and photosensitive cycle, respectively) and their second order rate constants towards RBV (kRBV-3pHBA* = 8.60 × 108 M−1 s−1 and kRBV-3SA* = 6.81 × 107 M−1 s−1). mHBA could not degrade RBV for its lack of intramolecular hydrogen bond and low molar absorptivity at 254 nm to abundantly transform into its triplet state. kobs-RBV increased as pH increased from 5.0 to 11.0 in UV/Sulfite/SA process, due to the high yield of eaq− in alkaline condition which promoted the generation of 3SA* and the stable of the absorbance of SA at 254 nm. By contrast, kobs-RBV underwent a process of first increasing and then decreasing in UV/Sulfite/pHBA process as the increase of pH, and its highest value achieved in a neutral condition. This lied in the exposure of eaq− increased as the increase of pH which promoted the generation of 3pHBA*, while the molar absorptivity of pHBA at 254 nm decreased as the increase of pH in an alkaline condition which inhibited the yield of 3pHBA*. The RBV degradation pathways and products toxicity assessment indicated that UV/Sulfite/pHBA had better detoxification performance on RBV than UV/Sulfite/SA process. This study disclosed a novel mechanism of emerging contaminants abatement through non-radical process in NSOM mediated ARP, and provide a wide insight into positive profile of DOM in water treatment process, instead of only taking DOM as a quencher of reactive intermediates.

Conformers influence on UV-absorbance of avobenzone

Avobenzone is most commonly used FDA approved chemical UV-A filter in many sunscreen formulations. An important drawback of avobenzone is its photounstability and undergoes chemical transformation upon exposure to UV-radiation/sunlight. Eventhough single bond rotations are implicated in the radiation induced chemical modification of avobenzone, the conformers role of avobenzone on UV absorbance is yet to be addressed. Using the In silico platform working on Density Functional Theory (DFT), the communication evaluates the role of conformers on UV absorbance spectra of enol/keto forms of avobenzone. The results indicate that the conformers of enolic-form of avobenzone have broad range of absorbance from 273-389 nm and the keto-form has relatively narrow range of absorbance from 266-288 nm. The chelated conformers of enolic-avobenzone with intramolecular hydrogen bond are swingy in nature yet possessing strong bond contributing to its broad-spectrum UVA filtering activity. Among the conformers of keto-form of avobenzone, the planar conformer with the torsional angle 180° undergo facile Norrish Type-I cleavage. Mapping of the data with previous experimental results has allowed identifying 3D structures involved in the key steps of photoketonization process of avobenzone. The reported results may help to understand the molecular basis of enol-to-keto photochemical transformation of avobenzone and to develop photostabilizer to endure long-lasting photoprotection to avobenzone.

Comparing industrial and analytical kraft lignins as biobased UV-protective additives in coatings

Lignin as the second most abundant biopolymer on Earth has the potential to become the alternative to petroleum-derived materials. It exhibits excellent UV absorption ability due to its aromatic structure and the presence of numerous phenolic, ketone, and intramolecular hydrogen bonds. Due to its complex nature, it is important to investigate its properties which is a very important step towards the valorization of lignin. Revealing its structural complexity allows for a better examination of its influence on the properties of the final lignin-based materials. In our research, we used two different kraft lignins: commercial analytical kraft lignin (AL) and industrial LignoBoost kraft lignin (KL) as UV-protect additives in BPA(Bisphenol A)-free polymer coatings based on diurethane dimethacrylate (DIUR). The maximum addition of KL and AL was 2 wt%. Both lignin samples were characterized in detail (composition analysis, ash content, molar mass and polydispersity, surface morphology, thermal properties, and quantitative measurement of hydroxyl group content). We investigated the influence of lignins on the textural and thermal properties of the coatings. Finally, we studied the application of lignin as a value-added UV-protective component by UV-Vis electronic absorption spectroscopy. KL with a higher purity and lower number of aliphatic OH had a better dispersion in the polymer matrix than AL lignin which had more agglomeration in the polymer matrix. The better dispersion resulted in producing a smoother surface in the coatings made from KL. Finally, a noticeable and significant impact of KL additive on the photoprotective properties of the coating material was demonstrated. These results showed a potential application and opportunity in the valorization of available industrial lignins toward sustainable and value-added products.

Host-Guest Recognition-Mediated Supramolecular Aggregation-Induced Electrochemiluminescence of Iridium(III) Complexes for Nucleic Acid Bioassay.

Currently reported aggregation-induced electroluminescence (AIECL) is usually based on the electrostatic integration of luminous monomers, and its application is still limited by the low ECL efficiency and poor structural stability of electrostatic integration-based AIECL emitters. Herein, host-guest recognition-mediated supramolecular AIECL was creatively developed to overcome the defects of electrostatic-integration-based AIECL. Cucurbit[8]uril (CB[8]) as the host recognized tris (2-phenylpyridine) iridium(III) [Ir(ppy)3] as the guest to form a novel supramolecular complex Ir-CB[8]. CB[8] can not only provide a large hydrophobic cavity to efficiently load Ir(ppy)3 and enrich coreactant tripropylamine but also utilize its carbonyl-laced portals to form intramolecular hydrogen bonds to stabilize the supramolecular structure, so Ir-CB[8] revealed excellent AIECL performance. The AIECL emitter Ir-CB[8] coupled the efficient DNA walker to construct a sensing system for miRNA-16 detection. Au nanoparticles@norepinephrine (AuNPs@NE) trapped by single-strand S1 was developed to significantly quench the ECL emission of Ir-CB[8]. When the target microRNA-16 (miRNA-16) existed, H1 was opened and the sequential assembly from H2 to H7 was triggered, forming "windmill"-like DNA walker with six Pb2+-dependent leg DNA. The assembled DNA walker, which was centered on DNA structure, had high efficiency and biocompatibility and can cut S1 to keep the DNA fragment-carrying quencher AuNPs@NE away from the electrode surface, thus restoring the ECL emission of Ir-CB[8] and realizing ultrasensitive detection of miRNA-16. Supramolecular AIECL mediated by host-guest recognition provides a new way for constructing AIECL emitters with excellent structural stability and AIECL efficiency, and an Ir-CB[8] coupling "windmill"-like DNA walker builds a promising ECL-sensing system for bioassay.

A perspective on cellulose dissolution with deep eutectic solvents

Currently, membrane manufacturing relies heavily on fossil-based solvents and polymers, resulting in significant negative impacts on human health and the environment. Thus, there is an urgent need for eco-friendly, low-toxicity, and sustainable solvents and polymers to comply with the United Nations’ sustainable development goals. Cellulose, as a green, natural, and abundant polymer, offers a sustainable source for membrane manufacturing. However, a significant challenge exists in dissolving cellulose due to strong intermolecular and intramolecular hydrogen bonds within cellulose molecules. Deep eutectic solvents (DESs), which contain both hydrogen bond donor and acceptor groups, have received significant attention as alternative solvents for cellulose dissolution owing to their low cost, low toxicity, environmentally friendly nature, ease of synthesis, and versatility. This review examines experimental studies, and theoretical approaches, highlighting key findings and factors influencing cellulose dissolution in deep eutectic solvents.

Recognition of Amino Acid Salts by Temperature-Dependent Allosteric Binding with Stereodynamic Urea Receptors.

Positive homotropic artificial allosteric systems are important for the regulation of cooperativity, selectivity and nonlinear amplification. Stereodynamic homotropic allosteric receptors can transmit and amplify induced chirality by the first ligand binding to axial chirality between two chromophores. We herein report stereodynamic allosteric urea receptors consisting of a rotational shaft as the axial chirality unit, terphenyl units as structural transmission sites and four urea units as binding sites. NMR titration experiments revealed that the receptor can bind two carboxylate guests in a positive homotropic allosteric manner attributed to the inactivation by intramolecular hydrogen-bonding between urea units within the receptor. In addition, the VT-CD spectra observed upon binding of the urea receptor with l- or D-amino acid salts in MeCN showed interesting temperature-dependent Cotton effects, based on the differences of the receptor shaft unit and the guest structure. The successful discrimination of hydrocarbon-based side chains of amino acid salts indicated that the input of chiral and steric information for the guest was amplified as outputs of the Cotton effect and the temperature-dependence of VT-CD spectra through cooperativity of positive allosteric binding.

Regioselective amination of 4-methylene-5,7-dinitroquinazoline: a mechanistic consideration on non-conventional N-H—π interactions between amine and ethylene moiety

ABSTRACT Pi (π) interactions originating from the N-H bond of amine and ethylene moiety have been explored on the mechanism of aromatic nucleophilic substitution (ArSN) of the nitro group of 4-methylene-5,7-dinitroquinazoline with methylamine in the gas phase and solvent media within DFT framework. The free energy profiles confirmed that the amination should take place at peri-position and calculations support the one-step mechanism through a transition state with no intermediate in the reaction route. Stabilisation of peri-transition state by intramolecular weak interaction akin to hydrogen bonding N-H—CH2 = C leads to the regioselective amination at peri-position of 4-methylene-5,7-dinitroquinazoline. The intramolecular hydrogen bond interactions at N-H—CH2 = C in the peri-transition state are strongly supported by a red shift in N-H stretching vibrations in simulated IR spectra and are confirmed by studying energetics of amination of structural/electronic analogues of 4-methylene-5,7-dinitroquinazoline. The present study established that ethylene plays an important role as an efficient H-bond acceptor in fixing the regioselectivity at peri-position in the amination of 4-methylene-5,7-dinitroquinazoline. This is the first-ever report for the exploration of the role of ethylene moiety as a hydrogen bond acceptor in mediating the regioselectivity of organic reactions.

Molecular Structure of Salicylic Acid and Its Hydrates: A Rotational Spectroscopy Study.

We present a study of salicylic acid and its hydrates, with up to four water molecules, done by employing chirped-pulse Fourier transform microwave spectroscopy. We employed the spectral data set of the parent, 13C, and 2H isotopologues to determine the molecular structure and characterize the intra- and intermolecular interactions of salicylic acid and its monohydrate. Complementary theoretical calculations were done to support the analysis of the experimental results. For the monomer, we analyzed structural properties, such as the angular-group-induced bond alternation (AGIBA) effect. In the microsolvates, we analyzed their main structural features dominated by the interaction of water with the carboxylic acid group. This work contributes to seeding information on how water molecules accumulate around this group. Moreover, we discussed the role of cooperative effects further stabilizing the observed inter- and intramolecular hydrogen bond interactions.

Modulating the ESIPT Mechanism and Luminescence Characteristics of Two Reversible Fluorescent Probes by Solvent Polarity: A Novel Perspective.

As reversible fluorescent probes, HTP-1 and HTP-2 have favourable applications for the detection of Zn2+ and H2S. Herein, the impact of solvent on the excited-state intramolecular proton transfer (ESIPT) of HTP-1 and HTP-2 was comprehensively investigated. The obtained geometric parameters and infrared (IR) vibrational analysis associated with the intramolecular hydrogen bond (IHB) indicated that the strength of IHB for HTP-1 was weakened in the excited state. Moreover, structural torsion and almost no ICT behaviour indicated that the ESIPT process did not occur in HTP-1. Nevertheless, when the 7-nitro-1,2,3-benzoxadiazole (NBD) group replaced the H atom, the IHB strength of HTP-2 was enhanced after photoexcitation, which inhibited the twisting of tetraphenylethylene, thereby opening the ESIPT channel. Notably, hole-electron analysis and frontier molecular orbitals revealed that the charge decoupling effect was the reason for the fluorescence quenching of HTP-2. Furthermore, the potential energy curves (PECs) revealed that HTP-2 was more inclined to the ESIPT process in polar solvents than in nonpolar solvents. With a decrease in solvent polarity, it was more conducive to the ESIPT process. Our study systematically presents the ESIPT process and different detection mechanisms of the two reversible probe molecules regulated by solvent polarity, providing new insights into the design and development of novel fluorescent probes.

Zirconium-Catalyzed Synthesis of 6-(Trifluoromethyl)-2H-pyran-2-ones via C-C Bond Cleavage.

A strategy for the annulation reaction of alkynones with ethyl 4,4,4-trifluoro-3-oxobutanoate through C-C bond cleavage is described. The zirconium-catalyzed transformation provides access to a wide range of structurally diverse 6-(trifluoromethyl)-2H-pyran-2-ones in moderate to good yields, utilizing Na2CO3 as a base. Further transformations into trifluoromethylated arene derivatives have been demonstrated as well. Furthermore, plausible reaction pathways are proposed by conducting various control experiments and isolating a β-diketone intermediate (X-ray) containing an intramolecular hydrogen bond.

Studies of the Functionalized α-Hydroxy-p-Quinone Imine Derivatives Stabilized by Intramolecular Hydrogen Bond.

In this work, reactions between 6,7-dichloropyrido[1,2-a]benzimidazole-8,9-diones with different benzohydrazides were studied. Nucleophilic substitution at C(6) was followed by isomerization and led to α-hydroxy-p-quinone imine derivatives. Synthesized compounds represent a combination of several structural motifs: a benzimidazole core fused with α-hydroxy-p-quinone imine, which contains a benzamide fragment. X-ray crystallography analysis revealed the formation of dimers linked through OH···O interactions and stabilization of the imine form by strong intramolecular NH···N hydrogen bonds. The protonation/deprotonation processes were investigated in a solution using UV-Vis spectroscopy and a 1H NMR titration experiment. Additionally, the electrochemical properties of 6,7-dichloropyrido[1,2-a]benzimidazole-8,9-dione and its α-hydroxy-p-quinone imine derivative as cathode materials were investigated in acidic and neutral environments using cyclic voltammetry measurements. Cathode material based on 6,7-dichloropyrido[1,2-a]benzimidazole-8,9-dione could act as a potentially effective active electrode in aqueous electrolyte batteries; however, further optimization is required.

Fungal Prenyltransferase AnaPT and Its F265 Mutants Catalyze the Dimethylallylation at the Nonaromatic Carbon of Phloretin.

Phloretin is widely found in fruit and shows various biological activities. Here, we demonstrate the dimethylallylation, geranylation, and farnesylation, particularly the first dimethylallylation at the nonaromatic carbon of phloretin (1) by the fungal prenyltransferase AnaPT and its mutants. F265 was identified as a key amino acid residue related to dimethylallylation at the nonaromatic carbon of phloretin. Mutants AnaPT_F265D, AnaPT_F265G, AnaPT_F265P, AnaPT_F265C, and AnaPT_F265Y were discovered to generally increase prenylation activity toward 1. AnaPT_F265G catalyzes the O-geranylation selectively at the C-2' hydroxyl group, which involves an intramolecular hydrogen bond with the carbonyl group of 1. Seven products, 1D5, 1D7-1D9, 1G2, 1G4, and 1F2, have not been reported prior to this study. Twelve compounds, 1D3-1D9, 1G1-1G3, and 1F1-1F2, exhibited potential inhibitory effects on α-glucosidase with IC50 values ranging from 11.45 ± 0.87 to 193.80 ± 6.52 μg/mL. Among them, 1G1 with an IC50 value of 11.45 ± 0.87 μg/mL was the most potential α-glucosidase inhibitor, which is about 30 times stronger than the positive control acarbose with an IC50 value of 346.63 ± 15.65 μg/mL.

Intramolecular Hydrogen Bonds Assisted Construction of Planar Tricyclic Structures for Insensitive and Highly Thermostable Energetic Materials.

Safety is fundamental for the practical development and application of energetic materials. Three tricyclic energetic compounds, namely, 1,3-di(1H-tetrazol-5-yl)-1H-1,2,4-triazol-5-amine (ATDT), 5'-nitro-3-(1H-tetrazol-5-yl)-2'H-[1,3'-bi(1,2,4-triazol)]-5-amine (ATNT), and 1-(3,4-dinitro-1H-pyrazol-5-yl)-3-(1H-tetrazol-5-yl)-1H-1,2,4-triazol-5-amine (ATDNP), were effectively synthesized through a simple two-step synthetic route. The introduction of intramolecular hydrogen bonds resulted in excellent molecular planarity for the three new compounds. Additionally, they exhibit regular crystal packing, leading to numerous intermolecular hydrogen bonds and π-π interactions. Benefiting from planar tricyclic structural features, ATDT, ATNT, and ATDNP are insensitive (IS > 60 J, FS = 360 N) when exposed to external stimuli. Furthermore, ATNT (Td = 361.1 °C) and ATDNP (Td = 317.0 °C) exhibit high decomposition temperatures and satisfying detonation performance. The intermolecular hydrogen bonding that produced this planar tricyclic molecular structure serves as a model for the creation of innovative multiple heterocycle energetic materials with excellent stability.

Synthesis, NMR, electronic properties using DFT study and anticancer activity of 3-methyl-6-(m-tolylamine) quinazolin-4(3H)-one

3-methyl-6-(m-tolylamine) quinazolin-4(3H)-one (MTAQ) was synthesized. Its formation was ascertained with the help ESI mass spectroscopy in conjunction with 1HNMR spectroscopy. Anticancer activity of MTAQ was measured experimentally, for human carcinoma cell line pertaining to cervix (HeLa). Optimized structure parameters, Frontier molecular orbital (FMO) behavior, non linear optical (NLO) profile, molecular electrostatic potential surface (MESP), Fukui functions (FF) and thermodynamic parameters were evaluated for the molecule of interest employing DFT/B3LYP/6–311++G(d,p) formalism. TD-DFT was made use of to calculate absorption maxima (λmax) of electronic transitions for the molecule in CDCl3 solvent. Frontier molecular orbitals revealed the origin of UV–Vis spectrum and to comprehend chemical reactivity of the molecule. Good coincidence was noticed between measured and computed structure parameters, UV–Vis spectra, and 1HNMR signals. Fukui functions helped in identifying electrophilic and nucleophilic centers of MTAQ. The calculations showed that MTAQ exhibits significant NLO activity in addition to predicting existence of intramolecular hydrogen bond.

Exploring the aqueous solubility and intermolecular interactions of diclofenac Diethylammonium: A molecular modeling study in solid state and solvation processes

Diclofenac, a widely used non-steroidal anti-inflammatory drug with analgesic, anti-inflammatory, and antipyretic properties, presents a challenge in oral administration due to its low aqueous solubility and subsequent low bioavailability. This issue, primarily attributed to the drug's high hydrophobicity, can lead to adverse side effects. To address this, our study delves into the aqueous solvation process of diclofenac through molecular modeling, employing both Carr-Parrinello molecular dynamics and Density Functional Theory. This combined approach enables a comprehensive investigation of the molecular interactions that influence solubility, encompassing non-polar interactions (van der Waals dispersion forces), dipole interactions, and hydrogen bonding. Our results highlight the formation of intermolecular interactions with water molecules through OH⋯Owater and CO⋯Hwater hydrogen bonds. Additionally, we observe intramolecular hydrogen bonds within diclofenac (NH⋯OH and NH⋯Cl) and weaker interactions involving CH⋯Cl. Notably, the protonation of diclofenac contributes to molecular rigidity, hindering hydrogen bonding with adjacent water molecules further. These insights offer a deeper understanding of the solubility challenges associated with diclofenac, paving the way for improved drug formulations that enhance bioavailability. The application of Carr-Parrinello molecular dynamics and density functional theory in this study highlights their valuable role in addressing complex drug solubility and design issues.