Intramolecular Charge Transfer Emission Research Articles

Manipulating Intramolecular Charge Transfer in Terpyridine Derivatives Towards "Turn-On" Fluorescence Chemosensors for Zn2.

A series of donor-acceptor (D-A) terpyridine derivatives with various intramolecular charge transfer interactions have been successfully synthesized bearing phenyl, methoxyphenyl, N-butyldiphenylamine (DPA), and triphenylamine (TPA) as electron-donors and terpyridine (TPY), 2,6-di(pyrazin-2-yl)pyridine (PYDPZ), and N,N-dimethylated PYDPZ (PYDPZ-2CH3) as electron acceptors. Upon the introduction of pyrazine rings instead of pyridine ones and further selective N,N'-dimethylation, the intramolecular D-A interactions are significantly enhanced, resulting in the remarkable reduced intramolecular charge transfer (ICT) transitions and quenched PL emissions in CH2Cl2 solution. However, their ICT emissions are clearly recovered upon adding Zn2+. Especially, for double positively charged compound 12, the Zn2+-induced "turn-on" green emission (λmax, em=518 nm, Φ=0.24) with excellent sensitivity (I/I0=77) and selectivity (IZn/ICd=23) is detected. Under the optimized experimental condition (EtOH-H2O (9 : 1, v/v), containing 0.05 M HEPES buffer (pH=7.4)), this probe is used to quantitative determination of Zn2+ in a water sample with an average recovery of 97.5 %. Furthermore, the probe is applied to imaging of Zn2+ ions in HeLa cells and its mechanism is confirmed by the molecular dynamics simulation, in which lower coulomb potential for membrane surface adsorption and energy barrier for membrane translocation can be found.

An efficient thermally activated delayed fluorophore featuring an oxygen-locked azaryl ketone acceptor

Thermally activated delayed fluorescence (TADF) dyes are promising for applications like bioimaging, sensing, and optoelectronic devices due to their efficient exciton utilization without noble metals, making them ideal for organic light-emitting diodes (OLEDs). In this contribution, we introduce a new TADF emitter, 3-(9,9-dimethylacridin-10(9H)-yl)-12H-chromeno[2,3-b]quinolin-12-one (CQLO-DMAC), which incorporates an intramolecular oxygen-locked azaryl ketone acceptor, CQLO. This design enhances molecular rigidity and electron-accepting strength. The CQLO-DMAC compound, featuring a bulky donor, shows significant intramolecular charge transfer and TADF emission. Comprehensive analyses, including spectroscopic studies and theoretical calculations, reveal high luminescence efficiency and reduced non-radiative losses. Utilizing CQLO-DMAC in OLEDs, we achieved a green-yellow emission peak at 548 nm and a maximum external quantum efficiency of 17.4 %. The findings highlight the potential of CQLQ as a highly effective acceptor in designing of TADF electroluminescent dyes.

Modulation of AIE and Intramolecular Charge Transfer of a Pyrene-Based Probe for Discriminatory Detection and Imaging of Oligomers and Amyloid Fibrils.

Oligomers and amyloid fibrils formed at different stages of protein aggregation are important biomarkers for a variety of neurodegenerative diseases including Alzheimer's and Parkinson's diseases. The development of probes for the sensitive detection of oligomeric species is important for early stage diagnosis of amyloidogenic diseases. Many small molecular dyes have been developed to probe the dynamic growth of amyloid fibrils. However, there is a lack of discriminatory detection strategies to monitor the dynamics of both oligomers and amyloid fibrils based on the differential modulation of the photophysical properties of a single dye. Here we report a pyrene-based intramolecular charge transfer (ICT) dye with large Stokes shifted red-emitting aggregation induced emission (AIE) for monitoring the dynamic populations of both oligomers and fibrils during the aggregation of hen egg white lysozyme (HEWL) protein. At the early stage of protein aggregation, the accumulation of HEWL oligomers results in a rapid and substantial increase in the red AIE intensity at 660 nm. Later, as the oligomers transform into mature fibrils, the dye exhibits a distinct photophysical change. Binding of the dye to HEWL fibrils strongly suppresses the red AIE and enhances ICT emission. This is evidenced by a gradual decrease in the AIE intensity (∼660 nm) and an increase in LE (∼490 nm) and ICT (∼540 nm) emission intensities during the later stages of protein aggregation. Thus, the dye provides simultaneous measurements of the population dynamics of both HEWL oligomers and fibrils during protein aggregation based on the discriminatory modulation of AIE and ICT of the dye. The dye also enables imaging of both HEWL oligomers and fibrils simultaneously using different emission channels in super-resolution confocal fluorescence microscopy.

Synthesis, nonlinear optical activity, solvents effect, β-cyclodextrin effect, and cytotoxic activity on skin fibroblast and breast cancer cell lines of a new chalcone derivative of nabumetone

The use of small organic molecules, such as chalcones, for efficient applications as organic luminescent materials has attracted increasing attention owing to their interesting optical, photophysical, and biological properties. In this study, a new chalcone, 1-(4-isopropylphenyl)-5-(6-methoxynaphthalen-2-yl)pent-1-en-3-one (INM), was synthesized via base condensation between nabumetone and cuminaldehyde. INM was subsequently identified and characterized by FT-IR, NMR spectroscopy (1H and 13C), mass spectrometry, elemental analysis, X-ray diffraction, thermogravimetric analysis, and FESEM studies. Investigation of the solvent effect revealed that the π → π* transition involved a bathochromic shift from hexane to water and a large Stokes-shifted, twisted intramolecular charge-transfer emission in water. Diffuse reflectance spectral studies confirmed the formation of transparent INM chalcones with excellent crystallinity, and photoluminescence studies substantiated the low recombination rate of electrons and holes. Tauc plot analysis with the Kubelka–Munk algorithm revealed higher direct (3.57 eV) and indirect (3.41 eV) bandgap energies of INM. Density functional theory calculations at B3LYP/6-31G(d,p) revealed that INM had promising nonlinear optical activity (β ≈ 30.504 × 10−30 compared to a reference material, urea. Cell biocompatibility was evaluated after culturing skin fibroblasts and breast cancer cells with INM using the MTT assay and fluorescence microscopy of the live/dead cell assay. It was observed that INM exhibited good NIH/3T3 cell adhesion and proliferation and the weak inhibiting ability of MDA-MB231.

Excited-State Dynamics of a Bright Fluorescent Dye with Precise Control of Emission Color Using Acid-Base Equilibrium, Intramolecular Charge Transfer, and Host-Guest Chemistry.

A fluorescent dye, a dithiophene-conjugated benzothiazole derivative (DTBz), was prepared to have high fluorescence emission quantum yields (ΦF) across various organic solvents. Its emission color modulation, from bright blue to deep red, was achieved through intramolecular charge transfer (ICT), acid-base equilibrium, and host-guest chemistry. Although it exhibits a weak solvatochromic effect, DTBz exhibited a bright fluorescence emission around 480 nm upon excitation at 390 nm in most solvents. In polar solvents, such as MeOH (methanol), EtOH (ethanol), DMF (N,N-dimethylforamide), and DMSO (dimethyl sulfoxide), an additional ICT emission band emerged around 640 nm, notably intense in DMSO, resulting in a bright greenish-white emission (ΦF = 0.67). The addition of 1,8-diazabicyclo[5,4.0]undec-7-ene (DBU) altered emission characteristics, reducing emission from the local excited (LE) state and enhancing ICT state emission. The degree of emission spectral change saturation with DBU addition varied with the solvent nature. Polar solvents with high dielectric constants, like DMSO and DMF, saw a complete disappearance of LE state emission with 5 equiv of DBU, resulting in a deep red emission (ΦFs of 0.53 and 0.48, respectively). Femtosecond transient absorption spectroscopy and time-resolved photoluminescence measurements elucidated the excited-state dynamics, revealing a long-lived excited state (τ-H = 10.3 ns) at a lower energy emission (640 nm), identified as DTBz-*, supported by transient absorption spectra analysis. Further analysis, including time-resolved fluorescence decay measurements and time-dependent density-functional theory (TD-DFT) calculations, underscored the role of deprotonation of DTBz's hydroxyl group in promoting the ICT process. The CIE coordination plot demonstrated wide linear emission color changes upon successive DBU additions in all solvents, while emission color precision was achieved through host-guest chemistry. Emission changes induced by DBU were reverted to the original state upon beta-cyclodextrin (β-CD) addition, with the 1H NMR study revealing the competition between acid-base equilibrium and host-guest complex formation as the cause of emission color change.

Fluorescent properties of chitosan-stabilized bisdemethoxycurcumin-silver nanoparticles: Synthesis and characterization

The extraction and modification of naturally-occurring compounds are widely performed due to their valuable medicinal and physical properties. Herin, we reported the extraction of bis-demethoxycurcumin from Ragbrai turmeric root. The isolated derivative was characterized by X-ray diffraction, IR, and NMR spectroscopy. Also, the green synthesis of bis-demethoxycurcumin chitosan silver BDMC-Ag-Ch nanoparticles is illustrated. These nanoparticles are identified by atomic force microscopy AFM and exhibit average particle size ∼ 53.41 nm The crystalline structure was confirmed by XRD analysis, which showed distinct peaks corresponding to silver oxide nanoparticles and Zeta power measurements revealed stable dispersion of the nanoparticles, indicating a good chitosan coating on the surface of bis-demethoxycurcumin Ag nanoparticles. The absorption bands at 240 and 405 nm are due to oxygen atom (n → π*) and aromatic (π → π*) transitions in curcumin and Chitosan molecules. The photoluminescence (PL) study of synthesized BDMC-Ag-Ch nanoparticles demonstrated an existence of two emission excited states in light-emitting, namely local excited (LE) and intramolecular charge transfer (ICT) emission states, due to the aromatic conjugation system within BDMC units and intra charge transfer between the silver ion and organic part.

Unravelling the optoelectronic and biological properties of phenanthroimidazo [1,2‐c] quinazoline‐based donor‐acceptor materials

Imidazo[1,2‐c]quinazoline is widely established as biologically spectral active materials, while their optoelectronic properties were seldom investigated in the literature. In this context, this research work introduced two donors of varying strength, such as triphenylamine (TP) and phenothiazine (PZ) units, into the phenanthroimidazo [1,2‐c] quinazoline acceptor unit to form donor‐acceptor type luminescence materials such as TPQZ and PZQZ, respectively and were characterized by NMR and mass spectroscopy. Both these materials exhibited intramolecular charge transfer (ICT) type absorption (∼380−450 nm) and emission (∼540−600 nm) characteristics, which attributed to the electronic transition occurring from the HOMO of the PZ/TP donor to the LUMO+1 and LUMO+2 of the imidazo [1,2‐c] quinazoline acceptor unit, as predicted using DFT calculations. Increasing the electron donor strength was not only limited to fine‐tuning the π→π* based localized (∼400−450 nm) to ICT (∼450−650 nm) emission characteristics in both the solution and solid‐state conditions but also found to improve the zone of inhibition to 16 mm against Staphylococcus aureus/Bacillus subtilis bacterial species. The scope of realizing the luminescence nature of this acceptor unit is further expanded towards tagging biological samples such as E. coli. This work opens up a new paradigm in developing luminescent materials for optoelectronic and biological applications.

Intramolecular Charge Transfer and Stimuli-Responsive Emission in Cholesterol-Appended Phenothiazine-Cyanostyryl-Based Donor-Acceptor Systems.

Organic fluorescent molecules have received considerable attention owing to their various optoelectronic applications. Herein, we report the design and synthesis of two cholesterol-functionalized cyanostyrene-phenothiazine-based D-π-A systems that are emissive in both the solution and solid states. The newly synthesized cholesterol-appended phenothiazine-cyanostyrene diads PTCS-1 and PTCS-2 vary in the N-alkylation of phenothiazine, respectively, with─octyl and─hexyl chains. Both molecules are highly fluorescent and show reasonably good quantum yields in nonpolar solvents because of twisted intramolecular charge transfer (TICT). The molecules exhibit aggregation-induced emission in the solid state. Due to the presence of flexible alkyl chains in the phenothiazine and cholesterol moieties, PTCS-1 and PTCS-2 show mechanochromic luminescence switching in response to external shear stress and emission recovery under methanol vapor. Powder X-ray diffraction studies prove that the emission switching on the applied stimuli in both PTCS-1 and PTCS-2 is attributed to the reversible transformation between the crystalline and amorphous states. Time-dependent density functional theory (TD-DFT) studies are carried out to gain insight into the ICT interactions. TD-DFT analysis at the TD-M06-2X/def2-TZVP level further revealed that in both molecules, the lowest unoccupied molecular orbital (LUMO) + 2, LUMO, highest occupied molecular orbital (HOMO), and HOMO - 1 orbitals are responsible for the charge transfer interactions. These ICT interactions are identified as π-π* type interactions.

Two-Photon-Responsive "TICT + AIE" Active Naphthyridine-BF2 Photoremovable Protecting Group: Application for Specific Staining and Killing of Cancer Cells.

The combined effects of twisted intramolecular charge transfer (TICT) and aggregation-induced emission (AIE) phenomena have demonstrated a significant influence on excited-state chemistry. These combined TICT and AIE features have been extensively utilized to enhance photodynamic and photothermal therapy. Herein, we demonstrated the synergistic capabilities of TICT and AIE phenomena in the design of the photoremovable protecting group (PRPG), namely, NMe2-Napy-BF2. This innovative PRPG incorporates TICT and AIE characteristics, resulting in four remarkable properties: (i) red-shifted absorption wavelength, (ii) strong near-infrared (NIR) emission, (iii) viscosity-sensitive emission property, and (iv) accelerated photorelease rate. Inspired by these intriguing attributes, we developed a nanodrug delivery system (nano-DDS) using our PRPG for cancer treatment. In vitro studies showed that our nano-DDS manifested effective cellular internalization, specific staining of cancer cells, high-resolution confocal imaging of cancerous cells in the NIR region, and controlled release of the anticancer drug chlorambucil upon exposure to light, leading to cancer cell eradication. Most notably, our nano-DDS exhibited a substantially increased two-photon (TP) absorption cross section (435 GM), exhibiting its potential for in vivo applications. This development holds promise for significant advancements in cancer treatment strategies.

Bodipy-based dyes for ionic-liquid-based optical carbon dioxide sensors

When ionic liquids come in contact with CO2 gas, their polarity and viscosity increase. Owing to these properties, ionic liquids containing organic dyes, which can change their optical properties depending on their surrounding polarity and viscosity, have recently been applied in portable CO2 optical sensors. Although ionic–liquid-based CO2 optical sensors have excellent sensing properties, the optimal organic dyes for ionic–liquid-based CO2 optical gas sensors have not been extensively investigated. Hence, we synthesized and characterized four 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY)-based dyes (PTPBDP, MTPBDP, TPABDP, and TPAMBDP) to explore the optimal structure for liquid-based CO2 optical sensors, with intramolecular charge transfer (ICT) and aggregation-induced emission (AIE) investigated. In addition, the synthesized dyes were applied to an ionic liquid, with their optical properties measured to analyze and compare their detection abilities and selectivity toward CO2 gas. As the CO2 concentration increased, all sensors, except TPAMBDP, showed changes in the optical properties in the visual and fluorescence channels. This approach facilitates the development of a portable sensor capable of detecting CO2 across diverse environmental conditions, showcasing its potential for versatile application in monitoring and analysis tasks. We believe these results provide insights into the design of organic dye structures for ionic liquid-based CO2 optical sensors.

A TICT-AIE activated dual-channel fluorescence-on probe to reveal the dynamics mechanosensing of lipid droplets during ferroptosis

Mechanical forces play a crucial role in cellular processes, including ferroptosis, a form of regulated cell death associated with various diseases. However, the mechanical aspects of organelle lipid droplets (LDs) during ferroptosis are poorly understood. In this study, we designed and synthesized a fluorescent probe, TPE-V1, to enable real-time monitoring of LDs' viscosity using a dual-channel fluorescence-on model (red channel at 617 nm and NIR channel at 710 nm). The fluorescent imaging of using TPE-V1 was achieved due to the integrated mechanisms of the twisted intramolecular charge transfer (TICT) and aggregation-induced emission (AIE). Through dual-emission channel fluorescence imaging, we observed the enhanced mechanical energy of LDs triggering cellular mechanosensing, including ferroptosis and cell deformation. Theoretical calculations confirmed the probe's behavior, showing that high-viscosity media prevented the rotation processes and restored fluorescence quenching in low viscosity. These findings suggest that our TICT-TPE design strategy provides a practical approach to study LDs' mechanical properties during ferroptosis. This development enhances our understanding of the interplay between mechanical forces and LDs, contributing to the knowledge of ferroptotic cell death and potential therapeutic interventions targeting dysregulated cell death processes.

Mechanofluorochromic behaviors and data security protection properties of salicylaldimine-based difluoroboron complexes with different aryl substituents.

To further explore the relationship between aryl substituents and mechanofluorochromic (MFC) behaviors, four salicylaldimine-based difluoroboron complexes (ts-Ph BF2, ts-Ph-NA BF2, ts-2NA BF2, and ts-triphenylamine [TPA] BF2), including aromatic substituents with different steric hindrance effects, were designed and successfully synthesized. Four complexes with twisted molecular conformation displayed intramolecular charge transfer and aggregation-induced emission properties. Under external mechanical stimuli, the as-synthesized powders of ts-Ph BF2, ts-Ph-NA BF2, and ts-TPA BF2 exhibited redshift fluorescence emission behaviors, and ts-Ph BF2 and ts-TPA BF2 could be recovered to original shifts by fuming, but ts-Ph-NA BF2 displayed irreversible switching. ts-2NA BF2 had no change during the grinding and fuming processes. The results indicated that the MFC behaviors could be attributed to the phase transformation between the well-defined crystalline and disordered amorphous states by X-ray diffraction measurement. Further research illustrated that ts-TPA BF2 with the most significant MFC phenomenon could be applied in data security protection in ink-free rewritable paper.

Bridge-induced taming of the visible electronic circular dichroism signatures of helicoBODIPYs

Helically-flexible bis(BODIPY)s based on chiral ethane-1,2-diamine or −1,2-diol bridges (named helicoBODIPYs) are an interesting family of accessible and tunable small multichromophoric organic dyes enabling visible electronic circular dichroism (ECD) and, even visible circularly polarized luminescence (CPL). However, their CPL brightness (BCPL) is still limited (up to ca. 10 M−1cm−1), due to low fluorescence efficiency owing to a non-optimal participation of intramolecular charge transfer (CT) emission. Herein, we analyze in depth the origin and factors controlling this CT, demonstrating the key participation of a BODIPY-to-BODIPY symmetry-breaking induced CT (SBCT), beyond the expected CT within each single BODIPY chromophore due to their push-pull character. It is also demonstrated that increasing the overcrowding at the flexible helicoBODIPY ethane bridges leads to BODIPY-BODIPY faced dispositions, promoting the SBCT and enabling the detection of both CT absorption and CT emission bands under specific conditions. Interestingly, this SBCT enhances the visible ECD (absolute gabs values), supporting the key role of the involved forbidden CT transitions in the chiroptical activity of these dyes, as well as the possibility of modulating their valuable visible chiroptical signatures (e.g., visible CPL brightness) by easily playing with steric factors at the dye bridge.

A detailed theoretical investigation on intramolecular charge transfer mechanism of primary, secondary, and tertiary p-amino substituted benzaldehyde

This article reports a detailed theoretical investigation on dual fluorescence properties of p-amino substituted benzaldehyde molecules by taking specifically p-N,N-dimethylaminobenzaldehyde (3° PABA), p-N-methylaminobenzaldehyde (2° PABA), and p-aminobenzaldehyde (1° PABA) molecules. The calculations are performed in gas phase as well as in butanol (BuOH) and dichloromethane (DCM) solvents. Twisted intramolecular charge transfer emission property is particularly looked at by scanning the potential energy curves as a function of -NR2 (R = H/CH3) rotation (twisting) angle. The results suggest that there are dual emission possibilities for 3° and 2° PABA molecules. Experimental validation is available for the former but not for the latter. 1° PABA, on the other hand, does not show any possibility of dual fluorescence except in BuOH. The theoretical absorption and emission spectra are also calculated and compared with experiment where it is available, and they are in close correlation. Excited state molecular dynamics simulations show that for 3° PABA, the molecule reaches to the 90° twisting angle and stays there with a probability higher than the same probability for 2° PABA. 1° PABA, on the other hand, had showed variations in the twisting angle from 0° to above 100°, but no evidence of this molecule to have considerable lifetime at 90° twisting angle.

Understanding the AIE phenomenon of nonconjugated rhodamine derivatives via aggregation-induced molecular conformation change

The bottom-up molecular science research paradigm has greatly propelled the advancement of materials science. However, some organic molecules can exhibit markedly different properties upon aggregation. Understanding the emergence of these properties and structure-property relationship has become a new research hotspot. In this work, by taking the unique closed-form rhodamines-based aggregation-induced emission (AIE) system as model compounds, we investigated their luminescent properties and the underlying mechanism deeply from a top-down viewpoint. Interestingly, the closed-form rhodamine-based AIE system did not display the expected emission behavior under high-viscosity or low-temperature conditions. Alternatively, we finally found that the molecular conformation change upon aggregation induced intramolecular charge transfer emission and played a significant role for the AIE phenomenon of these closed-form rhodamine derivatives. The application of these closed-form rhodamine-based AIE probe in food spoilage detection was also explored.

Excitation Wavelength and Concentration Dependent Photophysical behaviour of Dipolar Molecular rotors in Solution: Role of Structural Modification

The present work demonstrates that the twisted intramolecular charge transfer (TICT) and Intramolecular charge transfer (ICT) process can be achieved by structural modification of a molecule. The DMMC (2-(4-(dimethylamino)benzylidene)malononitrile) and DMDC (2-(4-(dimethylamino)benzylidene)malononitrile) exhibit TICT and ICT state respectively via structural modification at the ground state. Solvent-dependent fluorescence enhancement of these molecules is monitored by comparing the relative intensity of locally excited (LE) and ICT emission band from excitation wavelength and concentration-dependent study.Both molecules display the ICT emission process at excited state depending upon excitation wavelength and concentration in solution. Interestingly, aggregation behaviour is also observed during excitation wavelength and concentration-dependent study in H2O. Solvent and excitation wavelength-dependent quenching and enhancement of fluorescence properties are also observed. Dipolar state and molecular orientation may play an important role in excitation and concentration-dependent fluorescence process in solution.

Ratiometric fluorescence-based and chromogenic sensors for the detection of fluoride ions and their application in real samples.

This review focuses on the results of synthetic ratiometric fluorescent and colorimetric probes, which have been applied to qualitatively and quantitatively detect fluoride anions in cells, living organisms, and real samples. Primary attention is given to progress made in the working mechanism and applications of these probes to detect fluoride ions in living systems. In addition, design strategies and detection limit for these probes are discussed. This review aims to deliver a comprehensive compilation of the examples reported from 2005 to 2021 on the developments of ratiometric chromogenic and fluorogenic chemosensors for fluoride anions. A total of 20 different ratiometric/colorimetric sensors have been selected for the novelty in their design, sensitivity, detection limit, dynamic range, and speed of detection based on the three fundamental principles of F- ion detection, namely Si-O bond cleavage; excimer emission; and intramolecular charge transfer emission through the B-F monomer, B-F-B bridged dimers, and deprotonation of the amide N-H. Special emphasis has been given to categorize the fluorophores that work in aqueous media, and possible strategies that might be adopted to design green sensors are discussed. Finally, a tabular summary of the comparative studies of all the sensors based on their sensitivity, detection limit, working solvent, and applications is provided. This extensive review may expedite improvements in the development of advanced fluorescent probes for vast and stimulating applications in the future.

Discerning toxic nerve gas agents via a distinguishable 'turn-on' fluorescence response: multi-stimuli responsive quinoline derivatives in action.

We have successfully synthesized quinoline derivatives that exhibit easy scalability and responsiveness to multiple stimuli. These derivatives are capable of forming self-assembled nanoscopic aggregates in an aqueous medium. Consequently, when placed in an aqueous environment, we observe dual fluorescence originating from both twisted intramolecular charge transfer and aggregation-induced emission. The introduction of nerve gas agents, such as diethyl chlorophosphate (DClP) or diethylcyanophosphate (DCNP), to the probe molecules facilitates the charge-transfer process, resulting in a red-shift in absorption maxima. Notably, when operating in fluorescence mode, both of these analytes produce distinct output signals, making them easily distinguishable. DCNP generates a blue fluorescence, while the addition of DClP yields cyan fluorescence. Our mechanistic investigation reveals that the initial step involves phosphorylation of the quinoline nitrogen end. However, in the case of DCNP, the released cyanide ion subsequently attacks the carbonyl carbon centre, forming a cyanohydrin derivative. The response to these target analytes appears to be influenced by the nucleophilicity of the quinoline nitrogen end and the electrophilic nature of the carbonyl unit.

Dual-channel fluorescence dye: Fluorescent color-dependent visual detection of microplastics and selective polyurethane

In this study, we developed a dual-channel fluorescent dye ((E)-N′-(4-(diphenylamino)benzylidene)pyrazine-2-carbohydrazide) DPC for visual detection of 8 types of microplastics (MPs; HDPE, MDPE, LDPE, PET, PU, PVC, PS, and PP) and selective PU. The intramolecular charge transfer (ICT) and aggregation-induced emission (AIE) properties of DPC were demonstrated by the spectroscopic analysis, DFT calculations, and Tyndall effect. MPs and nonplastics (cellulose, chitin, sand, shell, and wood) were stained with DPC in water and their respective fluorescence signals in the blue and green channels were analyzed. The staining procedure using DPC was optimized with the concentration of DPC and staining time as parameters. DPC was able to effectively stain 8 types of MPs and only PU in blue and green fluorescence signals, respectively. Furthermore, false positive detections of DPC were minimized through additional ethanol treatment after staining. Moreover, the effects of temperature, pH, and salinity on the staining ability of DPC were investigated. Surprisingly, DPC was able to selectively detect PU through the green fluorescence signal even in a single environment where various MPs existed. Most importantly, DPC is the first fluorescent dye capable of selectively monitoring PU in the green channel as well as staining 8 types of MPs in the blue channel. DPC showed promising potential to be used for MP monitoring on real environmental samples.

Aromatic systems with two and three pyridine-2,6-dicarbazolyl-3,5-dicarbonitrile fragments as electron-transporting organic semiconductors exhibiting long-lived emissions.

The pyridine-3,5-dicarbonitrile moiety has gained significant attention in the field of materials chemistry, particularly in the development of heavy-metal-free pure organic light-emitting diodes (OLEDs). Extensive research on organic compounds exhibiting thermally activated delayed fluorescence (TADF) has led to numerous patents and research articles. This study focuses on the synthesis and investigation of the semiconducting properties of polyaromatic π-systems containing two and three fragments of pyridine-2,6-dicarbazolyl-3,5-dicarbonitrile. The compounds are synthesized by Sonogashira coupling reactions and characterized by steady-state and time-resolved luminescence spectroscopy. The compounds show efficient intramolecular charge transfer (ICT) from the donor to the acceptor. The photoluminescence (PL) spectra of the solutions of the compounds showed non-structured emission peaks in the visible region, which are attributed to ICT emission. The PL intensities of the solutions of the compounds are enhanced after deoxygenation, which is indicative of TADF. The photoluminescence quantum yields and TADF properties of the compounds are sensitive to the medium. Cyclic voltammetry measurements indicate good hole-blocking and electron-injecting properties due to their high ionization potentials. Photoelectron spectroscopy and time-of-flight measurements reveal good electron-transporting properties for one of the compounds. In general, polyaromatic π-systems with pyridine-3,5-dicarbonitrile fragments demonstrate promising potential for use in organic electronic devices, such as OLEDs.