Intermolecular Effects Research Articles

Atomic Transfer in Halogen-Bonded Complexes Mediated by Polarizing Environments: Mimicking Intra- and Intermolecular Effects in a Series of Cocrystals of N-Bromosaccharin with Pyridines

Atomic Transfer in Halogen-Bonded Complexes Mediated by Polarizing Environments: Mimicking Intra- and Intermolecular Effects in a Series of Cocrystals of N-Bromosaccharin with Pyridines

A new correlation model of entrainer properties and process economics for ternary azeotrope separation by extractive distillation

A correlation model was explored and established for the first time, linking the properties of entrainers to the process economics of extractive distillation separation for ternary azeotropes. Firstly, the extraction process of ternary azeotrope (methyl tert-butyl ether/ethanol (EtOH)/water) with common entrainers was optimized using a multi-objective optimization method based on a genetic algorithm. The optimal process parameters were obtained, and dimethyl sulfolone emerged as the best entrainer for the system. An economic correlation model was developed using machine learning to link the properties of entrainers and total annual cost (TAC). The model exhibited a determination coefficient of 0.993 and a single percentage error of less than 2% for each data set, indicating a significant fitting degree and prediction accuracy. The feasibility of selecting the optimal entrainer and calculating the economic benefit of the model was verified through another ternary azeotrope system (i.e., tetrahydrofuran/EtOH/water). The model provides valuable insights into energy savings and entrainer screening in extractive distillation. Additionally, the influence of the heat integration process with different entrainers on the economic benefit was analyzed, and the optimum entrainer changed to glycerol after the heat integration process. This finding suggests that determining the optimum entrainer should consider the possible heat integration process design. Finally, the relationship between the intermolecular interaction mechanism and separation effect was revealed through quantum chemical calculations.

Quantum Vibronic Effects on the Electronic Properties of Molecular Crystals.

We present a study of molecular crystals, focused on the effect of nuclear quantum motion and anharmonicity on their electronic properties. We consider a system composed of relatively rigid molecules, a diamondoid crystal, and one composed of floppier molecules, NAI-DMAC, a thermally activated delayed fluorescence compound. We compute fundamental electronic gaps at the density functional theory (DFT) level of theory, with the Perdew-Burke-Erzenhof (PBE) and strongly constrained and approximately normed (SCAN) functionals, by coupling first-principles molecular dynamics with a nuclear quantum thermostat. We find a sizable zero-point renormalization (ZPR) of the band gaps, which is much larger in the case of diamondoids (0.6 eV) than for NAI-DMAC (0.22 eV). We show that the frozen phonon (FP) approximation, which neglects intermolecular anharmonic effects, leads to a large error (∼50%) in the calculation of the band gap ZPR. Instead, when using a stochastic method, we obtain results in good agreement with those of our quantum simulations for the diamondoid crystal. However, the agreement is worse for NAI-DMAC where intramolecular anharmonicities contribute to the ZPR. Our results highlight the importance of accurately including nuclear and anharmonic quantum effects to predict the electronic properties of molecular crystals.

On the critical initiation of planar detonation in Noble-Abel and van der Waals gas

The critical decay rate theory (C.A. Eckett, J.J. Quirk, J.E. Shepherd, Journal of Fluid Mechanics 421 (2000) 147–183) on detonation initiation in unsteady flow was extended from ideal to Noble-Abel and van der Waals gas, in which the finite molecular volume effect (or repulsion force) and the inter-molecular attraction effect (or attraction force) were included. Considering the reactive Euler equations, the reaction zone temperature-gradient equation was established independently of the equation of state and wave geometry, and then solved asymptotically by assuming large activation energy, planar wave front and a one-step irreversible reaction model. A critical decay time was derived as the critical condition for detonation initiation. It was found that the inter-molecular attraction effect makes initiation more difficult by increasing the critical decay time, whereas the finite molecular volume effect promotes initiation. The real gas effects are enhanced when increasing the reduced activation energy and/or decreasing the heat capacity ratio of perfect gas. The applicability and generality of the asymptotic solutions were evaluated by comparison with quasi-unsteady simulation employing detailed reaction models for hydrogen-air and ethylene-air mixtures, and with the further simplified, fully analytical solutions based on strong-shock assumption. The critical conditions of the asymptotic solutions are qualitatively consistent with those obtained with the detailed mechanisms. The asymptotic solutions can also be well reproduced by the simple analytical solutions in most conditions. This study thus establishes a simple, yet reliable, method to evaluate the real gas effect on detonation initiation in high-pressure conditions.

Thermal Behavior and Decomposition Pathway for Nitrophenols and Sodium Nitrophenolates

Nitrophenols and corresponding sodium nitrophenolates are the main side products in the production of mononitrobenzene (MNB). These side products are hazardous due to their thermal instability nature. In this article, the thermal decomposition behaviors of nitrophenols and sodium nitrophenolates were first characterized by differential scanning calorimeter and accelerating rate calorimetry techniques. Then, the influence of phenol and sodium phenolate on the thermal decomposition of MNB was studied to clarify the effect of phenolic hydroxyl groups on the thermal stability of nitrophenols. It was found that compared to nitrophenols, the exothermic peaks of sodium nitrophenolates were more intense and presented strongly autocatalytic features. Sodium phenolate could significantly decrease the decomposition temperature of MNB. Aniline was detected as the unique product in the decomposition processes of pure MNB and MNB/sodium phenolate mixtures, and the nitrosobenzene was verified as the intermediate product. It was experimentally proven that sodium phenolate could catalyze the decomposition of nitrosobenzene (the decomposition intermediate of MNB). The violent decomposition of sodium nitrophenols was caused by the intermolecular catalysis effect of phenoxy groups.

Examination of Solvent Interactions with Trp-Cage in 1,1,1,3,3,3-Hexafluoro-2-propanol-water at 298 K through MD Simulations and Intermolecular Nuclear Overhauser Effects.

MD simulations of the peptide Trp-cage dissolved in 28% hexafluoroisopropanol (HFIP)-water have been carried out at 298 K with the goal of exploring peptide hydrogen-solvent fluorine nuclear spin cross-relaxation. The work was motivated by the observation that most experimental fluoroalcohol-peptide cross-relaxation terms at 298 K are small, both positive and negative, and not always well predicted from simulations. The cross-relaxation terms for hydrogens of the caged tryptophan residue of Trp-cage are substantially negative, a result consistent with simulations. It was concluded that hexafluoroisopropanol interactions near this part of the peptide are particularly long-lived. While both HFIP and water are present in all regions of the simulation box, the composition of the solvent mixture is not homogeneous throughout the system. HFIP generally accumulates near the peptide surface, while water molecules are preferentially found in regions that are more than 1.5 nm from the surface of the peptide. However, some water remains in higher-than-expected amounts in the solvent layer surrounding 6Trp, 9Asp, Ser13, and Ser14 residues in the helical region of Trp-cage. As observed in simulations of this system at 278 K, HFIP molecules aggregate into clusters that continually form and re-form. Translational diffusion of both HFIP and water appears to be slowed near the surface of the peptide with reduction in diffusion near the 6Trp residue 2- to 3-fold larger than calculated for solvent interactions with other regions of Trp-cage.

Revealing intermolecular coupling effects on vibrational spectra with infrared-reflectance absorbance analysis of perylene diimide thin films

Intermolecular interactions govern the optical and electronic properties of organic semiconductor thin films. Optimizing the function of molecular devices such as organic solar cells and light emitting diodes relies on understanding structural effects in a heterogeneous film environment. Because organic thin films are typically more disordered than inorganic crystalline semiconductors, advanced techniques are often needed to sufficiently characterize these materials. However, polarized infrared reflectance measurements are a benchtop method that can provide well-resolved vibrational spectra with specificity in their molecular orientation. By using infrared reflectance-absorbance spectroscopy (IRRAS) we relate the effects of intermolecular packing geometry on thin film vibrational spectra of perylene diimide (PDI), a prototypical molecular semiconductor. We analyze a suite of PDIs with differing sidechain substitutions, which adopt distinct crystal packing arrangements in thin films, by comparison of the reflectance spectra to isotropic KBr mixtures. We observe differences in the degree of Davydov splitting as a function of displacement along the short and long molecular axes and the π-π stacking distance that are evident in either the symmetric or anti-symmetric CO stretching frequencies of the solid. The four PDIs also display changes in relative intensity between the two modes that indicate different average molecular orientations.

Benzoxazole-Based Hybridized Local and Charge-Transfer Deep-Blue Emitters for Solution-Processable Organic Light-Emitting Diodes and the In fluences of Hexahydrophthalimido.

Hybridized local and charge-transfer (HLCT) emitters have attracted extensive attention, but the insolubility and severe self-aggregation tendency restrict their applications in solution-processable organic light-emitting diodes (OLEDs), particularly deep-blue OLEDs. Herein, two novel benzoxazole-based solution-processable HLCT emitters (BPCP and BPCPCHY) are designed and synthesized, in which benzoxazole acts as an acceptor, carbazole acts as a donor, and hexahydrophthalimido (HP, with a large intramolecular torsion angle and spatial distortion characteristics) acts as a bulky modified end-group with weak electron-withdrawing effects. Both BPCP and BPCPCHY exhibit HLCT characteristics and emit near ultraviolet in toluene at 404 and 399 nm. Compared to the BPCP, the BPCPCHY solid shows much better thermal stability (Tg, 187 vs 110 °C), higher oscillator strengths of the S1-to-S0 transition (0.5346 vs 0.4809), and faster kr (1.1 × 108 vs 7.5 × 107 s-1) and thus a much higher ΦPL in the neat film. The introduction of HP groups greatly suppresses the intra-/intermolecular charge-transfer effect and self-aggregation trends, and the BPCPCHY neat films placed in air for 3 months can still maintain an excellent amorphous morphology. The solution-processable deep-blue OLEDs utilizing BPCP and BPCPCHY achieved a CIEy of 0.06 with maximum external quantum efficiency (EQEmax) values of 7.19 and 8.53%, respectively, which are among the best results of the solution-processable deep-blue OLEDs based on the "hot exciton" mechanism. All of the above results indicate that benzoxazole is an excellent acceptor for constructing deep-blue HLCT materials, and the strategy of introducing HP as a modified end-group into an HLCT emitter provides a new perspective to develop solution-processable efficient deep-blue OLEDs with high morphological stability.

Excited-State Dynamics in Borylated Arylisoquinoline Complexes in Solution and in cellulo.

Two four-coordinate organoboron N,C-chelate complexes with different functional terminals on the PEG chains are studied with respect to their photophysical properties within human MCF-7 cells. Their excited-state properties are characterized by time-resolved pump-probe spectroscopy and fluorescence lifetime microscopy. The excited-state relaxation dynamics of the two complexes are similar when studied in DMSO. Aggregation of the complexes with the carboxylate terminal group is observed in water. When studying the light-driven excited-state dynamics of both complexes in cellulo, i. e., after being taken up into human MCF-7 cells, both complexes show different features depending on the nature of the anchoring PEG chains. The lifetime of a characteristic intramolecular charge-transfer state is significantly shorter when studied in cellulo (360±170 ps) as compared to in DMSO (∼960 ps) at 600 nm for the complexes with an amino group. However, the kinetics of the complexes with the carboxylate group are in line with those recorded in DMSO. On the other hand, the lifetimes of the fluorescent state are almost identical for both complexes in cellulo. These findings underline the importance to evaluate the excited-state properties of fluorophores in a complex biological environment in order to fully account for intra- and intermolecular effects governing the light-induced processes in functional dyes.

Toward Accurate Prediction of Ion Mobility in Organic Semiconductors by Atomistic Simulation.

A multiscale scheme (MLMS: Multi-Level Multi-Scale) to predict the ion mobility (μ) of amorphous organic semiconductors is proposed, which was successfully applied to the hole mobility predictions of 14 organic systems. An inverse relationship between μ and reorganization energy is observed due to local polaronic distortions. Another moderate inverse correlation between μ and distribution of site energy change exists, representing the effects of geometric flexibility. The former and the latter represent the intramolecular and intermolecular geometric effects, respectively. In addition, a linear correlation between transfer coupling and μ is observed, showing the importance of orbital overlaps between monomers. Especially, the highest hole mobility of C6-2TTN is due to its large transfer coupling. On the other hand, another high hole mobility of CBP turned out to come from the high first neighbor density (ρFND) of its first self-solvation, emphasizing the proper description of amorphous structural configurations with a sufficiently large number of monomers. In general, systems with either unusually high transfer coupling or high first neighbor density can potentially have high μ regardless of geometric effects. Especially, the newly suggested design parameter, ρFND, is pointing to a new direction as opposed to the traditional π-conjugation strategy.

Intramolecular and intermolecular effects of aromatic sticker residue strength on intrinsically disordered protein regions.

The formation of biomolecular condensates plays critical roles in cellular life and is implicated in various diseases. Condensate formation is often driven by multivalent interactions between aromatic “sticker” residues embedded between non-interacting “spacers” in intrinsically disordered protein regions (IDRs). One underappreciated factor, however, is that homotypic stickers such as aromatic residues can interact not only intermolecularly but also intramolecularly. This is especially important when considering the high “effective concentration” of intrachain stickers. How and under what conditions can intermolecular sticker-sticker interactions outcompete intramolecular sticker-sticker interactions? To investigate these questions, we examine minimal IDR constructs containing Gly-Ser repeat spacers and aromatic stickers of varying strengths. We combine atomistic and coarse-grained simulations with ensemble FRET and small-angle X-ray scattering data to compare the monomeric ensembles of these constructs against their tendency to form intermolecular interactions. We further show how this competition is modulated by changes in solution composition. Our experiments reveal how sticker strength, spacer length, and the chemical environment work together to determine the winner of the competition between inter- and intramolecular interactions.

Construction of graphene quantum dots ratiometric fluorescent probe by intermolecular electron transfer effect for intelligent and real-time visual detection of ofloxacin and its L-isomer in daily drink

The design of intelligent and real-time sensing devices is significant in the medical drug monitoring field, but it is still highly challenging. Here, ratiometric fluorescent detections of ofloxacin (OFL) and its L-isomer levofloxacin (LEV) constructed from tri-doped graphene quantum dots (T-GQDs) are reported, and the detection limits reach as low as 46/67 nM toward OFL/LEV due to the intermolecular electron transfer (intermolecular ET) effect. After adding OFL/LEV, the generation of electrostatic bond provides a channel for the intermolecular ET from the edge of T-GQDs to OFL/LEV, resulting in the fluorescence quenching at 414 nm and the fluorescence promoting at 498 nm. Furthermore, a smartphone can be used for the visual and quantitative detection of OFL and LEV by identifying the RGB values of test paper and drink samples. This work not only reveals the physics mechanism of ratiometric detection, but also develops a convenient smartphone diagnostic for OFL and LEV.

An insight into the hydrogen bonding, halogen bonding and chalcogen bonding interactions in manganese(iii) complexes with N2O2donor salicylidine Schiff base ligands.

Four manganese(iii) complexes, [MnL1(H2O)2]ClO4·H2O (1), [MnL2(H2O)2]ClO4 (2), [MnL3(DMSO)(H2O)]ClO4 (3) and [MnL4(DMSO)(H2O)]ClO4 (4), where H2L1 = N,N'-bis(5-bromosalicylidene)-1,3-diaminopropane, H2L2 = 2,2-dimethyl-N,N-bis(3-methyloxysalicylidene)-1,3-diaminopropane, H2L3 = N,N'-bis(5-chlorosalicylidene)-2,2-dimethyl-1,3-diaminopropane and H2L4 = 2-hydroxy-N,N'-bis(3-ethyloxysalicylidene)-1,3-diaminopropane are tetradentate N2O2-donor ligands and DMSO = dimethyl sulfoxide, have been synthesized and characterised by elemental analysis, IR and UV-vis spectroscopy and single-crystal X-ray diffraction studies. All are monomeric complexes. Complex 1 crystallises in orthorhombic space group P212121, complex 3 crystallises in triclinic space group P-1, whereas complexes 2 and 4 crystallize in monoclinic space groups, C2/c and C2/m respectively. In all the complexes, manganese(iii) has a six-coordinated pseudo-octahedral geometry in which imine nitrogen atoms and phenolate oxygen atoms of the deprotonated di-Schiff base constitute the equatorial plane. In complexes 1 and 2, water molecules are present in the fifth and sixth coordination sites in the axial positions while in complexes 3 and 4 they are occupied by one water and one DMSO. The coordinated water molecules initiate hydrogen-bonded networks in all complexes. DFT calculations have been carried out to analyze two aspects of these complexes viz. the formation of halogen (HaB) and chalcogen bonding (ChB) interactions in complexes 1 and 3 where the electron donor is the perchlorate anion and the acceptor either bromine or chlorine atoms for the HaBs and the sulfur atom of the coordinated DMSO for the ChB. In addition, other intermolecular effects are discussed in the solid state for complexes 1, 2 and 4, where the hydrogen atoms of the coordinated water molecules interact with the electron rich cavities formed by the phenolate and alkyloxy oxygen atoms of the Schiff-base ligand.

On the mechanism of intermolecular nitrogen-atom transfer from a lattice-isolated diruthenium nitride intermediate.

Catalyst confinement within microporous media provides the opportunity to site isolate reactive intermediates, enforce intermolecular functionalization chemistry by co-localizing reactive intermediates and substrates in molecular-scale interstices, and harness non-covalent host-guest interactions to achieve selectivities that are complementary to those accessible in solution. As part of an ongoing program to develop synthetically useful nitrogen-atom transfer (NAT) catalysts, we have demonstrated intermolecular benzylic amination of toluene at a Ru2 nitride intermediate confined within the interstices of a Ru2-based metal-organic framework (MOF), Ru3(btc)2X3 (btc = 1,3,5-benzenetricarboxylate, i.e., Ru-HKUST-1 for X = Cl). Nitride confinement within the extended MOF lattice enabled intermolecular C-H functionalization of benzylic C-H bonds in preference to nitride dimerization, which was encountered with soluble molecular analogues. Detailed study of the kinetic isotope effects (KIEs, i.e., kH/kD) of C-H amination, assayed both as intramolecular effects using partially labeled toluene and as intermolecular effects using a mixture of per-labeled and unlabeled toluene, provided evidence for restricted substrate mobility on the time scale of interstitial NAT. Analysis of these KIEs as a function of material mesoporosity provided approximate experimental values for functionalization in the absence of mass transport barriers. Here, we disclose a combined experimental and computational investigation of the mechanism of NAT from a Ru2 nitride to the C-H bond of toluene. Computed kinetic isotope effects for a H-atom abstraction (HAA)/radical rebound (RR) mechanism are in good agreement with experimental data obtained for C-H amination at the rapid diffusion limit. These results provide the first detailed analysis of the mechanism of intermolecular NAT to a C-H bond, bolster the use of KIEs as a probe of confinement effects on NAT within MOF lattices, and provide mechanistic insights unavailable by experiment because rate-determining mass transport obscured the underlying chemical kinetics.

Effects of Hydrogen Bonding on Nuclear Data Development of Liquid Anhydrous HF

Anhydrous Hydrogen Fluoride (HF) at high temperatures and pressures is used to process and manufacture nuclear fuel. As HF is often used directly with uranium, correct neutron thermal scattering cross sections are crucial to criticality safety applications. Classical molecular dynamics (CMD) simulation of the flexible HF system was used to create the thermal scattering law (TSL) and cross sections. The initial 2-site model is used in LAMMPS, and it can not capture the H-bond. To correctly represent the H-bond effects, a second, 3-site model was constructed in GROMACS. The 3-site model handled H-bonds by connecting a massless charge to the molecule. Key model parameters were compared to experimental data to verify the approach and models. To get the normalized VACF, the model was compared using hydrogen and fluorine bond length, density, potential energy, and diffusion coefficient. The phonon DOSs for both models were derived from the normalized VACF. DOSs were used to estimate the TSL (S(α,β)) and neutron thermal scattering cross sections for hydrogen in HF. The TSLs were evaluated using the FLASSH code with the Schofield diffusion model. It was observed that the representation of the hydrogen bonding changes the TSL's diffusional contributions. This is represented in the low energy scattering cross section, where intermolecular binding effects shift the cross section.

QMrebind: incorporating quantum mechanical force field reparameterization at the ligand binding site for improved drug-target kinetics through milestoning simulations.

Understanding the interaction of ligands with biomolecules is an integral component of drug discovery and development. Challenges for computing thermodynamic and kinetic quantities for pharmaceutically relevant receptor-ligand complexes include the size and flexibility of the ligands, large-scale conformational rearrangements of the receptor, accurate force field parameters, simulation efficiency, and sufficient sampling associated with rare events. Our recently developed multiscale milestoning simulation approach, SEEKR2 (Simulation Enabled Estimation of Kinetic Rates v.2), has demonstrated success in predicting unbinding (koff) kinetics by employing molecular dynamics (MD) simulations in regions closer to the binding site. The MD region is further subdivided into smaller Voronoi tessellations to improve the simulation efficiency and parallelization. To date, all MD simulations are run using general molecular mechanics (MM) force fields. The accuracy of calculations can be further improved by incorporating quantum mechanical (QM) methods into generating system-specific force fields through reparameterizing ligand partial charges in the bound state. The force field reparameterization process modifies the potential energy landscape of the bimolecular complex, enabling a more accurate representation of the intermolecular interactions and polarization effects at the bound state. We present QMrebind (Quantum Mechanical force field reparameterization at the receptor-ligand binding site), an ORCA-based software that facilitates reparameterizing the potential energy function within the phase space representing the bound state in a receptor-ligand complex. With SEEKR2 koff estimates and experimentally determined kinetic rates, we compare and interpret the receptor-ligand unbinding kinetics obtained using the newly reparameterized force fields for model host-guest systems and HSP90-inhibitor complexes. This method provides an opportunity to achieve higher accuracy in predicting receptor-ligand koff rate constants.

Aromatic ring flips in differently packed ubiquitin protein crystals from MAS NMR and MD

Probing the dynamics of aromatic side chains provides important insights into the behavior of a protein because flips of aromatic rings in a protein’s hydrophobic core report on breathing motion involving a large part of the protein. Inherently invisible to crystallography, aromatic motions have been primarily studied by solution NMR. The question how packing of proteins in crystals affects ring flips has, thus, remained largely unexplored. Here we apply magic-angle spinning NMR, advanced phenylalanine 1H-13C/2H isotope labeling and MD simulation to a protein in three different crystal packing environments to shed light onto possible impact of packing on ring flips. The flips of the two Phe residues in ubiquitin, both surface exposed, appear remarkably conserved in the different crystal forms, even though the intermolecular packing is quite different: Phe4 flips on a ca. 10–20 ns time scale, and Phe45 are broadened in all crystals, presumably due to µs motion. Our findings suggest that intramolecular influences are more important for ring flips than intermolecular (packing) effects.

A scheme for rapid evaluation of the intermolecular three-body polarization effect in water clusters.

The ability to accurately and rapidly evaluate the intermolecular many-body polarization effect of the water system is very important for computer simulations of biomolecule in aqueous. In this paper, a scheme is proposed based on the polarizable dipole-dipole interaction model and used to rapidly estimate the intermolecular many-body polarization effect in water clusters. We use a bond-dipole-based polarization function to evaluate the polarization energy. We regard two OH bonds of a water molecule as two bond-dipoles and set the permanent OH bond-dipole moment of a water molecule to be 1.51 Debye. We estimate the induced OH bond-dipole moment via a simple formula in which only one correction factor is needed. This scheme is then applied to tens of water clusters to calculate the three- and four-body interaction energies. The three-body interaction energies of 93 water clusters produced by our scheme are compared with those produced by the counterpoise-corrected CCSD(T)/aug-cc-pVDZ, MP2/aug-cc-pVDZ, M06-2X/jul-cc-pVTZ methods, by the AMOEBApro13, iAMOEBA, AMOEBA+, AMOEBA+(CF) methods, and by the MB-pol method. The four-body interaction energies of 47 water clusters yielded by our scheme are compared with those yielded by the counterpoise-corrected MP2/aug-cc-pVDZ and M06-2X/ jul-cc-pVTZ methods, by the AMOEBApro13, AMOEBA+, AMOEBA+(CF) methods, and by the MB-pol method. The comparison results show that the scheme proposed in this paper can reproduce the counterpoise-corrected CCSD(T)/aug-cc-pVDZ three-body interaction energies and reproduce the counterpoise-corrected MP2/aug-cc-pVDZ four-body interaction energies both accurately and efficiently. We anticipate the scheme proposed here can be useful for computer simulations of liquid water and aqueous solutions.

Investigation by Chemical Substitution within 2p-3d-4f Clusters of the Cobalt(II) Role in the Magnetic Behavior of [vdCoLn]2 (vd = Verdazyl Radical).

1,5-Dimethyl-3-(3'-(hydroxymethyl)-2'-pyridine)-6-oxotetrazane (H3vdpyCH2OH) or its oxidized verdazyl form (vdpyCH2OH) reacted with transition metal and/or lanthanide acetates to yield [(vdpyCH2O)2Co2Ln2(acO)8] (Ln = Y(III): ICo,Y; Gd(III): ICo,Gd), [(vdpyCH2O)2M3(acO)4] (M = Zn(II): IIZn; Co(II): IICo) and [(vdpyCH2OH)Zn(acO)2] (IIIZn) through self-assembly implying a complex-as-ligand intermediate. Single-crystal diffraction reveals that IMT,Ln are composed of 2p-3d-4f centrosymmetric clusters with verdazyl radicals at the two ends coordinated to the transition-metal ion in a tridentate mode and to the {Ln2(acO)4} lanthanide central core in a monodentate mode through its alkoxo moiety. In ICo,Gd, the transition-metal ions adopt an irregular octahedral environment, and the {Ln2(acO)4} core adopts a paddlewheel motif, whereas in ICo,Y, the transition metal is pentacoordinated, and the central core contains only two acetate bridges. Going from ICo,Y to IICo, the central {Y2(acO)4} core is replaced by an axially compressed octahedral cobalt(II) center, whereas the outer parts of the molecule remain still. The dc magnetic studies revealed that the alternate π-stacking of the verdazyl radicals in IIZn led to the formation of alternate antiferromagnetically coupled 1D chains with Jvd-vd = -8.2(1) cm-1 and Jvd-vd' = -7.6(1) cm-1 (-2J convention). In ICo,Y, a complex fitting procedure allowed us to retrieve a complete set of magnetic parameters to take into account both the magnetic anisotropy of the cobalt(II) centers and intra- and inter-molecular exchange effects. For ICo,Y, it led to gCo = 2.13(4), DCo = 100(2) cm-1, ECo = 19.9(5) cm-1, JCo-vd = +26.5(4) cm-1, and Jvd-vd = -7.95(4) cm-1. ac magnetic susceptibility of ICo,Y, ICo,Gd and IICo did not reveal any slow relaxation of the magnetization even when a dc external magnetic field up to 2000 Oe was applied.

Playing with Intramolecular and Intermolecular Electronic Effects in Lithiated Organic Electrode Materials

Organic electrode materials offer obvious opportunities to promote cost‐effective and environmentally friendly rechargeable batteries. Over the last decade, tremendous progress has been made thanks to the use of molecular engineering focused on the tailoring of redox‐active organic moieties. However, the electrochemical performance of organic host structures relies also on the crystal packing like the inorganic counterparts, which calls for further efforts in terms of crystal chemistry to make a robust redox‐active organic center electrochemically efficient in the solid state. Following our ongoing research aiming at elaborating lithiated organic cathode materials, we will report on the impact of polymorphism on the electrochemical behavior of dilithium (2,3‐dilithium‐oxy)terephthalate vs. Li. Having isolated dilithium (3‐hydroxy‐2‐lithium‐oxy)terephthalate through an incomplete acid‐base neutralization reaction, its subsequent thermally induced decarboxylation mechanism led to the formation a new polymorph of dilithium (2,3‐dilithium‐oxy‐)terephthalate referred to as Li4‐o‐DHT (β‐phase). This new phase is able to operate at 3.1 V vs. Li+/Li, which corresponds to a positive potential shift of +250 mV compared to a polymorph formerly reported and referred now to as Li4‐o‐DHT (α‐phase). This contribution will also be the occasion to underline the critical role of the crystal arrangement in organic electrodes by mitigating intramolecular electronic effects by through‐space charge modulation. This finding paves the way for further researches by smartly tuning electronic effects at molecular level as well as in the solid state or in other words, by combining molecular engineering (organic chemistry) and crystal design (materials science).